Subcommittee D02.03 on Elemental Analysis


    Showing results 1-82 of 82 matching ACTIVE standards under the jurisdiction of D02.03     D02 Home

    C1234-11 Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations

    D129-13 Standard Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method)

    D482-13 Standard Test Method for Ash from Petroleum Products

    D808-11 Standard Test Method for Chlorine in New and Used Petroleum Products (High Pressure Decomposition Device Method)

    D874-13a Standard Test Method for Sulfated Ash from Lubricating Oils and Additives

    D1018-11 Standard Test Method for Hydrogen In Petroleum Fractions

        See also WK31920 proposed revision

    D1091-11 Standard Test Methods for Phosphorus in Lubricating Oils and Additives

    D1266-13 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)

    D1318-00(2011) Standard Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method)

    D1552-08(2014)e1 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)

        See also WK20960 proposed revision

        See also WK47130 proposed revision

    D1839-14 Standard Test Method for Amyl Nitrate in Diesel Fuels

        See also WK44850 proposed revision

    D2622-10 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry

    D2784-11 Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp)

        See also WK29572 proposed revision

    D3120-08(2014) Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry

    D3227-13 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)

    D3228-08(2014) Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method

        See also WK20949 proposed revision

    D3230-13 Standard Test Method for Salts in Crude Oil (Electrometric Method)

        See also WK26973 proposed revision

        See also WK44427 proposed revision

    D3231-13 Standard Test Method for Phosphorus in Gasoline

        See also WK29573 proposed revision

    D3237-12 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy

    D3246-14 Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry

        See also WK43517 proposed revision

    D3341-05(2011) Standard Test Method for Lead in Gasoline - Iodine Monochloride Method

    D3348-12 Standard Test Method for Rapid Field Test for Trace Lead in Unleaded Gasoline (Colorimetric Method)

    D3605-00(2011) Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy

    D3701-01(2012) Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry

    D3831-12 Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy

    D4045-04(2010) Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry

        See also WK47127 proposed revision

    D4046-14 Standard Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry

        See also WK31934 proposed revision

        See also WK44851 proposed revision

    D4047-13 Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method

    D4294-10 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry

    D4628-05(2011)e1 Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry

        See also WK46602 proposed revision

    D4629-12 Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection

    D4808-01(2012) Standard Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy

    D4927-10 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy

        See also WK29923 proposed revision

        See also WK46603 proposed revision

    D4929-07(2014) Standard Test Methods for Determination of Organic Chloride Content in Crude Oil

        See also WK46925 proposed revision

    D4951-14 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry

        See also WK43445 proposed revision

    D4952-12 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)

    D5056-04(2010) Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption

    D5059-14 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy

        See also WK44849 proposed revision

    D5184-12 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry

    D5185-13e1 Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

    D5291-10 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants

    D5384-14 Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)

        See also WK44428 proposed revision

    D5453-12 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence

        See also WK19105 proposed revision

        See also WK45685 proposed revision

    D5600-14 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

        See also WK44799 proposed revision

    D5622-95(2011) Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis

    D5708-12 Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry

    D5761-96(2012) Standard Practice for Emulsification/Suspension of Multiphase Fluid Waste Materials

    D5762-12 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence

    D5863-00a(2011) Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry

    D6334-12 Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence

    D6443-04(2010) Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)

        See also WK46604 proposed revision

    D6470-99(2010) Standard Test Method for Salt in Crude Oils (Potentiometric Method)

    D6481-99(2010) Standard Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy

        See also WK46605 proposed revision

    D6595-00(2011) Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry

    D6667-14 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence

        See also WK26788 proposed revision

    D6728-11 Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry

    D6732-04(2010) Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry

    D6920-13 Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection

    D7039-13 Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry

        See also WK34424 proposed revision

        See also WK47498 proposed revision

        See also WK47556 proposed revision

    D7040-04(2010) Standard Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry

    D7041-04(2010)e1 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels, and Oils by Online Gas Chromatography with Flame Photometric Detection

    D7111-14 Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

        See also WK45764 proposed revision

        See also WK46976 proposed revision

    D7171-05(2011) Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy

    D7212-13 Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter

    D7220-12 Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry

        See also WK46185 proposed revision

        See also WK47674 proposed revision

    D7260-12 Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants

    D7303-12 Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry

    D7318-13 Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration

    D7319-13 Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography

    D7328-13 Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection

        See also WK38399 proposed revision

    D7343-12 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants

    D7455-14 Standard Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis

    D7482-14 Standard Practice for Sampling, Storage, and Handling of Hydrocarbons for Mercury Analysis

        See also WK43440 proposed revision

        See also WK45623 proposed revision

        See also WK45763 proposed revision

    D7578-10e1 Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants

    D7620-10 Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection

    D7622-10e1 Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction

    D7623-10 Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method

    D7691-11e1 Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

    D7740-11 Standard Practice for Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants

    D7751-12 Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis

        See also WK46606 proposed revision

    D7757-12 Standard Test Method for Silicon in Gasoline and Related Products by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry

    D7876-13 Standard Practice for Practice for Sample Decomposition Using Microwave Heating (With or Without Prior Ashing) for Atomic Spectroscopic Elemental Determination in Petroleum Products and Lubricants

    Showing results 1-7 of 7 matching Proposed New Standards under the jurisdiction of D02.03     D02 Home

    WK19089 New Test Method for Determination of Total Mercury in Crude Oil by Combustion Cold Vapor Atomic Absorption Spectroscopy

    WK25797 New Test Method for Trace Metals in Aviation Turbine Fuel by ICP-AES

    WK27610 New Guide for Elemental Analysis of Biofuels

    WK29574 New Test Method for Multielement analysis of crude oils using ICP-AES

    WK30318 New Test Method for Determination of Aluminum and Silicon in Heavy Fuel Oils by Monochromatic Energy Dispersive X-ray Fluorescence

    WK43216 New Test Method for Determination of Phosphorus, Sulfur and Chlorine content in Crude Oil and Petroleum Products by X-ray Fluorescence

    WK46607 New Test Method for Elemental analysis of distillate fuels by ICP-MS