Subcommittee D01.46 on Industrial Protective Coatings


    Showing results 1-38 of 38 matching ACTIVE standards under the jurisdiction of D01.46     D01 Home

    C267-01(2012) Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes

    C307-03(2012) Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings

        See also WK53641 proposed revision

    C308-00(2012)e1 Standard Test Methods for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars

        See also WK53642 proposed revision

    C413-01(2012) Standard Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

        See also WK53643 proposed revision

    C531-00(2012) Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

        See also WK53644 proposed revision

    C579-01(2012) Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

        See also WK53645 proposed revision

    C580-02(2012) Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

        See also WK53646 proposed revision

    C722-04(2012) Standard Specification for Chemical-Resistant Monolithic Floor Surfacings

    C1486-00(2012) Standard Practice for Testing Chemical-Resistant Broadcast and Slurry-Broadcast Resin Monolithic Floor Surfacings

    D2200-13 Standard Practice for Use of Pictorial Surface Preparation Standards and Guides for Painting Steel Surfaces

    D3276-15 Standard Guide for Painting Inspectors (Metal Substrates)

    D4417-14 Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel

        See also WK51207 proposed revision

    D4541-09e1 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers

        See also WK36686 proposed revision

    D4752-10(2015) Standard Practice for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub

    D4787-13 Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates

    D4940-15e1 Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blast Cleaning Abrasives

    D5043-04(2009) Standard Practice for Field Identification of Coatings

    D5064-16 Standard Practice for Conducting a Patch Test to Assess Coating Compatibility

        See also WK54020 proposed revision

        See also WK55475 proposed revision

    D5065-13 Standard Guide for Assessing the Condition of Aged Coatings on Steel Surfaces

    D5162-15 Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates

    D5402-15 Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs

    D5702-07(2012) Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals

    D6206-09(2015) Standard Practice for Sampling of Coating Films

    D6237-09(2015) Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)

    D6386-16a Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting

        See also WK42594 proposed revision

    D6577-15 Standard Guide for Testing Industrial Protective Coatings

    D6578/D6578M-13 Standard Practice for Determination of Graffiti Resistance

    D6677-07(2012) Standard Test Method for Evaluating Adhesion by Knife

    D6943-15 Standard Practice for Immersion Testing of Industrial Protective Coatings and Linings

    D6944-15 Standard Practice for Determining the Resistance of Cured Coatings to Thermal Cycling

    D7055-14 Standard Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings

    D7127-13 Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument

    D7234-12 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers

    D7393-16 Standard Practice for Indicating Oil in Abrasives

        See also WK54021 proposed revision

    D7396-14 Standard Guide for Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting

    D7682-12 Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty

        See also WK55267 proposed revision

    D7803-12 Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Powder Coating

    D7868-13 Standard Practice for Determining the Dry Fall (Fog) Properties of Protective Coatings

    0 matching Proposed New Standards under the jurisdiction of D01.46     D01 Home

    Showing Results 1-2 of 2 matching WITHDRAWN standards under the jurisdiction of D01.46     D01 Home

    C722-94 Standard Specification for Chemical-Resistant Resin Monolithic Surfacings (Withdrawn 2003)

    C868-02(2012) Standard Test Method for Chemical Resistance of Protective Linings (Withdrawn 2015)