Subcommittees and Standards

Showing results 1-30 of 30 matching ACTIVE standards under the jurisdiction of D01.23     D01 Home

D522-93a(2008) Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings

D823-95(2012)e1 Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels

D968-05(2010) Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive

D1005-95(2007) Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers

D1212-91(2007)e1 Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings

D1474-98(2008) Standard Test Methods for Indentation Hardness of Organic Coatings
    See also WK42548 proposed revision

D1640-03(2009) Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings at Room Temperature

D1653-03(2008) Standard Test Methods for Water Vapor Transmission of Organic Coating Films
    See also WK29046 proposed revision

D2134-93(2012) Standard Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker

D2197-13 Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion
    See also WK34259 proposed revision

D2370-98(2010) Standard Test Method for Tensile Properties of Organic Coatings

D2794-93(2010) Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)

D3359-09e2 Standard Test Methods for Measuring Adhesion by Tape Test
    See also WK26353 proposed revision

D3363-05(2011)e2 Standard Test Method for Film Hardness by Pencil Test

D4060-10 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser

D4138-07a Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means

D4414-95(2007) Standard Practice for Measurement of Wet Film Thickness by Notch Gages

D4708-12 Standard Practice for Preparation of Uniform Free Films of Organic Coatings

D5178-13 Standard Test Method for Mar Resistance of Organic Coatings
    See also WK34258 proposed revision

D5179-02(2008) Standard Test Method for Measuring Adhesion of Organic Coatings to Plastic Substrates by Direct Tensile Testing

D5895-13 Standard Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders
    See also WK40434 proposed revision

D6037-96(2008) Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings
    See also WK33690 proposed revision

D6132-08 Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Gage
    See also WK37382 proposed revision

D6905-03(2012) Standard Test Method for Impact Flexibility of Organic Coatings

D6991-05(2010) Standard Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method
    See also WK26791 proposed withdrawal

D7091-12 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
    See also WK40701 proposed revision

D7187-10 Standard Test Method for Measuring Mechanistic Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching

D7334-08 Standard Practice for Surface Wettability of Coatings, Substrates and Pigments by Advancing Contact Angle Measurement

D7490-08 Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements
    See also WK41825 proposed revision

D7541-11 Standard Practice for Estimating Critical Surface Tensions

0 matching Proposed New Standards under the jurisdiction of D01.23     D01 Home

D4366-95 Standard Test Methods for Hardness of Organic Coatings by Pendulum Damping Tests (Withdrawn 2003)

D4518-91 Standard Test Methods for Measuring Static Friction of Coating Surfaces (Withdrawn 2000)

Back to the Main Committee Page