Technical Committees / Committee C16 /
Committee C16.30 on Thermal Measurement
Showing results 1-29 of 29 matching ACTIVE standards under the jurisdiction of C16.30 C16 Home
C177-10 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus See also WK23875 proposed revision See also WK34634 proposed revision See also WK34635 proposed revision
C335/C335M-10e1 Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation See also WK31228 proposed revision
C351-92b(1999)e1 Standard Test Method for Mean Specific Heat of Thermal Insulation (Withdrawn 2008)
C518-10 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus See also WK20355 proposed revision See also WK23940 proposed revision
C653-97(2012) Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation
C680-10 Standard Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat, Cylindrical, and Spherical Systems by Use of Computer Programs
C687-12 Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation See also WK33785 proposed revision See also WK42156 proposed revision
C745-92(1999) Standard Test Method for Heat Flux Through Evacuated Insulations Using a Guarded Flat Plate Boiloff Calorimeter (Withdrawn 2008)
C835-06 Standard Test Method for Total Hemispherical Emittance of Surfaces up to 1400°C See also WK37222 proposed withdrawal
C1033-85(2000) Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation Installed Vertically (Withdrawn 2003)
C1041-10 Standard Practice for In-Situ Measurements of Heat Flux in Industrial Thermal Insulation Using Heat Flux Transducers
C1043-06(2010) Standard Practice for Guarded-Hot-Plate Design Using Circular Line-Heat Sources
C1044-12 Standard Practice for Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided Mode
C1045-07 Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions
C1046-95(2007) Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
C1055-03(2009) Standard Guide for Heated System Surface Conditions That Produce Contact Burn Injuries
C1057-03(2010) Standard Practice for Determination of Skin Contact Temperature from Heated Surfaces Using A Mathematical Model and Thermesthesiometer
C1058/C1058M-10 Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation
C1060-11a Standard Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings
C1114-06 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus See also WK37221 proposed withdrawal
C1129-12 Standard Practice for Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges See also WK21174 proposed revision
C1130-07(2012) Standard Practice for Calibrating Thin Heat Flux Transducers
C1132-95 Standard Practice for Calibration of the Heat Flow Meter Apparatus (Withdrawn 2002)
C1153-10 Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging
C1155-95(2007) Standard Practice for Determining Thermal Resistance of Building Envelope Components from the In-Situ Data
C1199-12 Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods
C1303/C1303M-12 Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation See also WK31589 proposed revision See also WK39580 proposed revision See also WK39581 proposed revision
C1363-11 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus See also WK37304 proposed revision
C1371-04a(2010)e1 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
C1373/C1373M-11 Standard Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions
C1549-09 Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
C1558-12 Standard Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation
C1667-09 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Resistivity of Vacuum Panels
Showing results 1-5 of 5 matching Proposed New Standards under the jurisdiction of C16.30 C16 Home
WK63 New Practice for Practice for Determination and Verification of the Thermal Resistance of Building Insulation Products
WK35104 New Test Method for Measuring the Solar Heat Gain Coefficient of Fenestration Systems Using Calorimetry Hot Box Methods
WK25210 New Practice for Determination of Thermal Resistance of Loose-Fill Insulation for Sidewall Applications
WK29609 New Guide for Thermal Performance Testing of Cryogenic Insulation Systems
WK37574 New Test Method for Using Heat Flow Meter Apparatus to Characterize Phase-Change-Material (PCM)-Enhanced Materials
