Technical Committees / Committee A06 /


Committee A06.01 on Test Methods


Subcommittees and Standards

Showing results 1-30 of 30 matching ACTIVE standards under the jurisdiction of A06.01     A06 Home

A34/A34M-06(2012) Standard Practice for Sampling and Procurement Testing of Magnetic Materials

A341/A341M-00(2011)e1 Standard Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the Ballistic Test Methods

A342/A342M-04(2012) Standard Test Methods for Permeability of Feebly Magnetic Materials

A343/A343M-03(2008) Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame
    See also WK42044 proposed revision

A348/A348M-05(2011) Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame

A596/A596M-95(2009)e1 Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens

A598/A598M-02(2007) Standard Test Method for Magnetic Properties of Magnetic Amplifier Cores

A697/A697M-03(2008) Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods
    See also WK40981 proposed revision

A698/A698M-07 Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields
    See also WK40805 proposed revision

A712-07 Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys

A717/A717M-12 Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens

A719/A719M-02(2007) Standard Test Method for Lamination Factor of Magnetic Materials
    See also WK33999 proposed revision

A720/A720M-02(2011) Standard Test Method for Ductility of Nonoriented Electrical Steel
    See also WK34000 proposed revision

A721/A721M-02(2011) Standard Test Method for Ductility of Oriented Electrical Steel
    See also WK34001 proposed revision

A772/A772M-00(2011)e1 Standard Test Method for AC Magnetic Permeability of Materials Using Sinusoidal Current

A773/A773M-01(2009) Standard Test Method for dc Magnetic Properties of Materials Using Ring and Permeameter Procedures with dc Electronic Hysteresigraphs
    See also WK40492 proposed revision

A804/A804M-04(2009)e1 Standard Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens

A889/A889M-03(2008) Standard Test Method for Alternating-Current Magnetic Properties of Materials at Low Magnetic Flux Density Using the Voltmeter-Ammeter-Wattmeter-Varmeter Method and 25-cm Epstein Frame
    See also WK42078 proposed revision

A893/A893M-03(2008) Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies
    See also WK41927 proposed withdrawal

A894/A894M-00(2011)e1 Standard Test Method for Saturation Magnetization or Induction of Nonmetallic Magnetic Materials

A900/A900M-01(2012) Standard Test Method for Lamination Factor of Amorphous Magnetic Strip

A912/A912M-11 Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens

A927/A927M-11 Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method

A932/A932M-01(2012) Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens

A937/A937M-12 Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces

A971/A971M-10 Standard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils

A977/A977M-07 Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs
    See also WK26243 proposed revision

A1013-00(2013)e1 Standard Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method
    See also WK30945 proposed revision

A1036-04(2009) Standard Guide for Measuring Power Frequency Magnetic Properties of Flat-Rolled Electrical Steels Using Small Single Sheet Testers

A1071/A1071M-11 Standard Test Method for Evaluating Hygrothermal Corrosion Resistance of Permanent Magnet Alloys


0 matching Proposed New Standards under the jurisdiction of A06.01     A06 Home

A883/A883M-01 Standard Test Method for Ferrimagnetic Resonance Linewidth and Gyromagnetic Ratio of Nonmetallic Magnetic Materials (Withdrawn 2006)



Back to the Main Committee Page