Showing results 1-18 of 18 matching ACTIVE standards under the jurisdiction of A05.11 A05 Home
A308/A308M-10 Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process
A459-08(2013) Standard Specification for Zinc-Coated Flat Steel Armoring Tape
A463/A463M-10 Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
A653/A653M-11 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
See also WK40985 proposed revision
A755/A755M-11 Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
A792/A792M-10 Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
See also WK23032 proposed revision
A875/A875M-13 Standard Specification for Steel Sheet, Zinc-5?% Aluminum Alloy-Coated by the Hot-Dip Process
See also WK39884 proposed revision
A879/A879M-12 Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
A917-08 Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
A918-06(2011) Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
A924/A924M-13 Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
See also WK26441 proposed revision
See also WK30976 proposed revision
See also WK39789 proposed revision
A929/A929M-01(2007) Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
See also WK38029 proposed revision
A1003/A1003M-13a Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
See also WK33461 proposed revision
See also WK33854 proposed revision
See also WK34729 proposed revision
See also WK35506 proposed revision
See also WK39666 proposed revision
See also WK40048 proposed revision
A1004/A1004M-99(2009) Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members
A1046/A1046M-10ae1 Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process
A1057/A1057M-08 Standard Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process
A1063/A1063M-11a Standard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process
A1079-13 Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
See also WK39787 proposed revision
0 matching Proposed New Standards under the jurisdiction of A05.11 A05 Home
A885/A885M-96(2002) Standard Specification for Steel Sheet, Zinc and Aramid Fiber Composite Coated for Corrugated Steel Sewer, Culvert, and Underdrain Pipe (Withdrawn 2006)
Back to the Main Committee Page
