Showing results 1-21 of 21 matching ACTIVE standards under the jurisdiction of A01.19 A01 Home
A109/A109M-08 Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled
A414/A414M-10 Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels
See also WK28887 proposed revision
A424/A424M-09a Standard Specification for Steel, Sheet, for Porcelain Enameling
A505-00(2005) Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
See also WK19820 proposed revision
A506-05 Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
See also WK35090 proposed revision
A507-10 Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
See also WK35088 proposed revision
A568/A568M-11b Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
See also WK33882 proposed revision
A606/A606M-09a Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance
A635/A635M-09b Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
See also WK28854 proposed revision
A659/A659M-10 Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled
See also WK35085 proposed revision
A684/A684M-10a Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled
See also WK35087 proposed revision
A749/A749M-08 Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for
A794/A794M-09 Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled
See also WK35086 proposed revision
A805/A805M-09 Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled
A980/A980M-11 Standard Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled
See also WK34711 proposed revision
A1008/A1008M-11 Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
See also WK9715 proposed revision
See also WK34208 proposed revision
A1011/A1011M-10 Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
See also WK30788 proposed revision
See also WK33059 proposed revision
See also WK33433 proposed revision
See also WK34209 proposed revision
See also WK35597 proposed revision
A1018/A1018M-10 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
See also WK28853 proposed revision
A1031/A1031M-10 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled
See also WK35089 proposed revision
A1039/A1039M-11 Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, Produced by Twin-Roll Casting Process
See also WK30647 proposed revision
See also WK32591 proposed revision
F1267-07 Standard Specification for Metal, Expanded, Steel
See also WK28971 proposed revision
Showing results 1-1 of 1 matching Proposed New Standards under the jurisdiction of A01.19 A01 Home
WK36044 New Specification for Steel Sheet,Cold-Rolled, Commercial,Structural, High Strength Low Alloy, High Strength Low Alloy with Improved Formability, Produced by the Twin Roll Casting Process
A619/A619M-97 Standard Specification for Non-Killed Forming Steel (NKFS) Sheet, Carbon Cold-Rolled (Withdrawn 1997)
A621/A621M-97 Standard Specification for Forming Steel (FS), Sheet and Strip, Carbon, Hot-Rolled (Withdrawn 1997)
A812/A812M-96 Standard Specification for Steel, High-Strength, Low-Alloy, Hot-Rolled, for Welded Layered Pressure Vessels (Withdrawn 1997)
A873/A873M-87a(1993) Standard Specification for Steel Sheet and Strip, Chromium-Molybdenum Alloy, for Pressure Vessels (Withdrawn 1997)
Back to the Main Committee Page
