Subcommittee A01.06 on Steel Forgings and Billets


    Showing results 1-54 of 54 matching ACTIVE standards under the jurisdiction of A01.06     A01 Home

    A266/A266M-13 Standard Specification for Carbon Steel Forgings for Pressure Vessel Components

    A275/A275M-15 Standard Practice for Magnetic Particle Examination of Steel Forgings

    A288-91(2013) Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators

    A289/A289M-97(2013) Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators

    A290/A290M-16 Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears

        See also WK52111 proposed revision

    A291/A291M-16 Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears

        See also WK52110 proposed revision

        See also WK55217 proposed revision

    A336/A336M-15 Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts

    A372/A372M-15 Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels

        See also WK54389 proposed revision

    A388/A388M-16 Standard Practice for Ultrasonic Examination of Steel Forgings

        See also WK44689 proposed revision

        See also WK52163 proposed revision

        See also WK52166 proposed revision

        See also WK52789 proposed revision

        See also WK52790 proposed revision

    A418/A418M-15 Standard Practice for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings

    A427/A427M-10(2015) Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction

    A456/A456M-08(2013) Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings

    A469/A469M-07(2012) Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors

    A470/A470M-05(2015) Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts

    A471/A471M-09(2014) Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels

    A472/A472M-07(2012) Standard Specification for Heat Stability of Steam Turbine Shafts and Rotor Forgings

    A473-16 Standard Specification for Stainless Steel Forgings

        See also WK50239 proposed revision

    A503/A503M-15 Standard Specification for Ultrasonic Examination of Forged Crankshafts

    A504/A504M-14 Standard Specification for Wrought Carbon Steel Wheels

    A508/A508M-16 Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels

        See also WK52114 proposed revision

        See also WK52115 proposed revision

        See also WK52661 proposed revision

        See also WK52662 proposed revision

    A521/A521M-06(2016) Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use

    A531/A531M-13 Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings

    A541/A541M-05(2015) Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components

    A551/A551M-08(2013) Standard Specification for Carbon Steel Tires for Railway and Rapid Transit Applications

    A579/A579M-04a(2014) Standard Specification for Superstrength Alloy Steel Forgings

        See also WK54719 proposed revision

        See also WK55332 proposed revision

    A592/A592M-10(2015) Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Parts for Pressure Vessels

    A604/A604M-07(2012) Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets

    A646/A646M-06(2016) Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings

    A649/A649M-10(2015) Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery

    A668/A668M-16 Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use

        See also WK52112 proposed revision

        See also WK53466 proposed revision

    A711/A711M-07(2012) Standard Specification for Steel Forging Stock

    A723/A723M-10(2015) Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application

    A729/A729M-15e1 Standard Specification for Carbon and Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service

    A745/A745M-15 Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings

    A765/A765M-07(2012) Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements

    A768/A768M-05(2015) Standard Specification for Vacuum-Treated 12 % Chromium Alloy Steel Forgings for Turbine Rotors and Shafts

    A788/A788M-15 Standard Specification for Steel Forgings, General Requirements

        See also WK53469 proposed revision

        See also WK54767 proposed revision

    A833-08a(2014) Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers

        See also WK54390 proposed revision

    A837/A837M-06(2016) Standard Specification for Steel Forgings, Alloy, for Carburizing Applications

    A859/A859M-04(2014) Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components

    A891/A891M-16 Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels

        See also WK52113 proposed revision

    A909/A909M-06(2011) Standard Specification for Steel Forgings, Microalloy, for General Industrial Use

    A939/A939M-15 Standard Practice for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings

    A940/A940M-06(2016) Standard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors

    A956-12 Standard Test Method for Leeb Hardness Testing of Steel Products

        See also WK53561 proposed revision

        See also WK53581 proposed revision

        See also WK53582 proposed revision

        See also WK53601 proposed revision

    A965/A965M-14 Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts

    A966/A966M-15 Standard Practice for Magnetic Particle Examination of Steel Forgings Using Alternating Current

    A982/A982M-10(2015) Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils

    A983/A983M-06(2016) Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines

    A986/A986M-01(2011) Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings

    A1021/A1021M-05(2015) Standard Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service

    A1038-13e1 Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method

    A1049/A1049M-10(2015) Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components

    A1090/A1090M-14 Standard Specification for Forged Rings and Hollows Produced from Steels with Atmospheric Corrosion Resistance

    0 matching Proposed New Standards under the jurisdiction of A01.06     A01 Home

    Showing Results 1-2 of 2 matching WITHDRAWN standards under the jurisdiction of A01.06     A01 Home

    A21-94(1999) Standard Specification for Carbon Steel Axles, Non-Heat-Treated and Heat-Treated, for Railway Use (Withdrawn 2003)

    A1048/A1048M-06(2011) Standard Specification for Pressure Vessel Forgings, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten for Elevated Temperature Service (Withdrawn 2016)