Work Item
ASTM WK72253

Revision of C1002-18 Standard Specification for Steel Self-Piercing Tapping Screws for Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs

Keywords

None Provided

Rationale

In section 8.5 of the current version, addressing screw length requirement, the first requirement (8.5.1) is too broad and does not address the distinctive length requirements of each screw type and purpose. The proposed revisions give purpose to the requirements and better align with 8.5.2, Type W and Type A screws shall be long enough to penetrate wood members not less than 5/8 in. (15.9 mm). The requirement for Type G screws follows references in the 2018 IBC to 1-1/2 in. Type G drywall screws. The requirement for Type S parallels AISI standards S240-15, C4.1.2.1 and S220-15, D1.2.

Details

Developed by Subcommittee: C11.02

Committee: C11

Staff Manager: Stephen Mawn

Work Item Status

Date Initiated: 03-12-2020

Technical Contact: Jeff Bowlsby

Item: 003

Ballot: C11.02 (20-03)

Status: Will Reballot Item