Petroleum by Committee

    F20.22 - Mitigation Actions

    F1127 Standard Guide for Containment of Hazardous Material Spills by Emergency Response Personnel

    F1524 Standard Guide for Use of Advanced Oxidation Process for the Mitigation of Chemical Spills

    F1525/F1525M Standard Guide for Use of Membrane Technology in Mitigating Hazardous Chemical Spills

    F716 Standard Test Methods for Sorbent Performance of Absorbents

    F726 Standard Test Method for Sorbent Performance of Adsorbents


    F20.21 - Initial Response Actions

    F1011 Standard Guide for Developing a Hazardous Materials Training Curriculum for Initial Response Personnel

    F1129/F1129M Standard Guide for Using Aqueous Foams to Control the Vapor Hazard from Immiscible Volatile Liquids


    F20.17 - Shoreline Countermeasures

    F1686 Standard Guide for Surveys to Document and Assess Oiling Conditions on Shorelines

    F1687 Standard Guide for Terminology and Indices to Describe Oiling Conditions on Shorelines

    F2204 Standard Guide for Describing Shoreline Response Techniques

    F2464 Standard Guide for Cleaning of Various Oiled Shorelines and Habitats


    F20.16 - Surveillance and Tracking

    F1779 Standard Practice for Reporting Visual Observations of Oil on Water

    F2067 Standard Practice for Development and Use of Oil-Spill Trajectory Models

    F2327 Standard Guide for Selection of Airborne Remote Sensing Systems for Detection and Monitoring of Oil on Water

    F2534 Standard Guide for Visually Estimating Oil Spill Thickness on Water

    F2926 Standard Guide for Selection and Operation of Vessel-mounted Camera Systems


    F20.15 - In-Situ Burning

    F1788 Standard Guide for In-Situ Burning of Oil Spills on Water: Environmental and Operational Considerations

    F1990 Standard Guide for In-Situ Burning of Spilled Oil: Ignition Devices

    F2152 Standard Guide for In-Situ Burning of Spilled Oil: Fire-Resistant Boom

    F2230 Standard Guide for In-situ Burning of Oil Spills on Water: Ice Conditions

    F2533 Standard Guide for In-Situ Burning of Oil in Ships or Other Vessels

    F2823 Standard Guide for In-Situ Burning of Oil Spills in Marshes


    F20.13 - Treatment

    F1209 Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Ponds and Sloughs

    F1210 Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Lakes and Large Water Bodies

    F1231 Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Rivers and Creeks

    F1279 Standard Guide for Ecological Considerations for the Restriction of the Use of Surface Washing Agents: Permeable Land Surfaces

    F1280 Standard Guide for Ecological Considerations for the Use of Surface Washing Agents: Impermeable Surfaces

    F1413 Standard Guide for Oil Spill Dispersant Application Equipment: Boom and Nozzle Systems

    F1460 Standard Practice for Calibrating Oil Spill Dispersant Application Equipment Boom and Nozzle Systems

    F1693 Standard Guide for Consideration of Bioremediation as an Oil Spill Response Method on Land

    F1737/F1737M Standard Guide for Use of Oil Spill Dispersant Application Equipment During Spill Response: Boom and Nozzle Systems

    F1738 Standard Test Method for Determination of Deposition of Aerially Applied Oil Spill Dispersants

    F1872 Standard Guide for Use of Chemical Shoreline Cleaning Agents: Environmental and Operational Considerations

    F2059 Standard Test Method for Laboratory Oil Spill Dispersant Effectiveness Using The Swirling Flask

    F2205 Standard Guide for Ecological Considerations for the Use of Chemical Dispersants in Oil Spill Response: Tropical Environments

    F2465/F2465M Standard Guide for Oil Spill Dispersant Application Equipment: Single-point Spray Systems

    F2532 Standard Guide for Determining Net Environmental Benefit of Dispersant Use


    F20.11 - Control

    F1093 Standard Test Methods for Tensile Strength Characteristics of Oil Spill Response Boom

    F1523 Standard Guide for Selection of Booms in Accordance With Water Body Classifications

    F1599 Standard Guide for Collecting Performance Data on Temporary Storage Devices

    F1657/F1657M Standard Practice for Emergency Joining of Booms with Incompatible Connectors

    F2084/F2084M Standard Guide for Collecting Containment Boom Performance Data in Controlled Environments

    F2438 Standard Specification for Oil Spill Response Boom Connection: Slide Connector

    F2682 Standard Guide for Determining the Buoyancy to Weight Ratio of Oil Spill Containment Boom

    F2683 Standard Guide for Selection of Booms for Oil-Spill Response

    F625/F625M Standard Practice for Classifying Water Bodies for Spill Control Systems

    F715 Standard Test Methods for Coated Fabrics Used for Oil Spill Control and Storage

    F818 Standard Terminology Relating to Spill Response Barriers

    F962 Standard Specification for Oil Spill Response Boom Connection: Z-Connector


    F20.12 - Removal

    F1084 Standard Guide for Sampling Oil/Water Mixtures for Oil Spill Recovery Equipment

    F1607 Standard Guide for Reporting of Test Performance Data for Oil Spill Response Pumps

    F1778 Standard Guide for Selection of Skimmers for Oil-Spill Response

    F1780 Standard Guide for Estimating Oil Spill Recovery System Effectiveness

    F2008 Standard Guide for Qualitative Observations of Skimmer Performance

    F2709 Standard Test Method for Determining Nameplate Recovery Rate of Stationary Oil Skimmer Systems

    F631 Standard Guide for Collecting Skimmer Performance Data in Controlled Environments


    F17.60 - Gas

    D2513 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings

    F1025 Standard Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe

    F1041 Standard Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing

    F1563 Standard Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing

    F1734 Standard Practice for Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe

    F1804 Standard Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation

    F1924 Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing

    F1948 Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing

    F1973 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems

    F2138 Standard Specification for Excess Flow Valves for Natural Gas Service

    F2145 Standard Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing

    F2207 Standard Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe

    F2509 Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing

    F2600 Standard Specification for Electrofusion Type Polyamide-11 Fittings for Outside Diameter Controlled Polyamide-11 Pipe and Tubing

    F2767 Standard Specification for Electrofusion Type Polyamide-12 Fittings for Outside Diameter Controlled Polyamide-12 Pipe and Tubing for Gas Distribution

    F2785 Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings

    F2817 Standard Specification for Poly (Vinyl Chloride) (PVC) Gas Pressure Pipe and Fittings For Maintenance or Repair

    F2818 Standard Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing

    F2830 Standard Specification for Manufacture and Joining of Polyethylene (PE) Gas Pressure Pipe With a Peelable Polypropylene (PP) Outer Layer

    F2897 Standard Specification for Tracking and Traceability Encoding System of Natural Gas Distribution Components (Pipe, Tubing, Fittings, Valves, and Appurtenances)

    F2945 Standard Specification for Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings

    F2968/F2968M Standard Specification for Black Crosslinked Polyethylene (PEX) Pipe, Fittings and Joints For Gas Distribution Applications

    F689 Standard Practice for Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe Within Metallic Casings

    F905 Standard Practice for Qualification of Polyethylene Saddle-Fused Joints


    D19.06 - Methods for Analysis for Organic Substances in Water

    D1252 Standard Test Methods for Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water

    D1783 Standard Test Methods for Phenolic Compounds in Water

    D2036 Standard Test Methods for Cyanides in Water

    D2580 Standard Test Method for Phenols in Water by Gas-Liquid Chromatography

    D2908 Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography

    D3325 Standard Practice for Preservation of Waterborne Oil Samples

    D3326 Standard Practice for Preparation of Samples for Identification of Waterborne Oils

    D3328 Standard Test Methods for Comparison of Waterborne Petroleum Oils by Gas Chromatography

    D3414 Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy

    D3415 Standard Practice for Identificaiton of Waterborne Oils

    D3650 Standard Test Method for Comparison of Waterborne Petroleum Oils By Fluorescence Analysis

    D3694 Standard Practices for Preparation of Sample Containers and for Preservation of Organic Constituents

    D3695 Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography

    D3871 Standard Test Method for Purgeable Organic Compounds in Water Using Headspace Sampling

    D3973 Standard Test Method for Low-Molecular Weight Halogenated Hydrocarbons in Water

    D4128 Standard Guide for Identification and Quantitation of Organic Compounds in Water by Combined Gas Chromatography and Electron Impact Mass Spectrometry

    D4129 Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection

    D4165 Standard Test Method for Cyanogen Chloride in Water 

    D4193 Standard Test Method for Thiocyanate in Water

    D4282 Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion

    D4489 Standard Practices for Sampling of Waterborne Oils

    D4763 Standard Practice for Identification of Chemicals in Water by Fluorescence Spectroscopy

    D4839 Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection

    D5175 Standard Test Method for Organohalide Pesticides and Polychlorinated Biphenyls in Water by Microextraction and Gas Chromatography

    D5176 Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection

    D5241 Standard Practice for Micro-Extraction of Water for Analysis of Volatile and Semi-Volatile Organic Compounds in Water

    D5315 Standard Test Method for Determination of N-Methyl-Carbamoyloximes and N-Methylcarbamates in Water by Direct Aqueous Injection HPLC with Post-Column Derivatization

    D5316 Standard Test Method for 1,2-Dibromoethane and 1,2-Dibromo-3-Chloropropane in Water by Microextraction and Gas Chromatography

    D5317 Standard Test Method for Determination of Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector

    D5412 Standard Test Method for Quantification of Complex Polycyclic Aromatic Hydrocarbon Mixtures or Petroleum Oils in Water

    D5739 Standard Practice for Oil Spill Source Identification by Gas Chromatography and Positive Ion Electron Impact Low Resolution Mass Spectrometry

    D5788 Standard Guide for Spiking Organics into Aqueous Samples

    D5790 Standard Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry

    D5904 Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection

    D6104 Standard Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off

    D6157 Standard Practice for Determining the Performance of Oil/Water Separators Subjected to a Sudden Release

    D6238 Standard Test Method for Total Oxygen Demand in Water

    D6520 Standard Practice for the Solid Phase Micro Extraction (SPME) of Water and its Headspace for the Analysis of Volatile and Semi-Volatile Organic Compounds

    D6696 Standard Guide for Understanding Cyanide Species

    D6888 Standard Test Method for Available Cyanide with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection

    D6889 Standard Practice for Fast Screening for Volatile Organic Compounds in Water Using Solid Phase Microextraction (SPME)

    D7065 Standard Test Method for Determination of Nonylphenol, Bisphenol A, p-tert -Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Gas Chromatography Mass Spectrometry

    D7066 Standard Test Method for dimer/trimer of chlorotrifluoroethylene (S-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination

    D7237 Standard Test Method for Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection

    D7284 Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection

    D7363 Standard Test Method for Determination of Parent and Alkyl Polycyclic Aromatics in Sediment Pore Water Using Solid-Phase Microextraction and Gas Chromatography/Mass Spectrometry in Selected Ion Monitoring Mode

    D7365 Standard Practice for Sampling, Preservation and Mitigating Interferences in Water Samples for Analysis of Cyanide

    D7485 Standard Test Method for Determination of Nonylphenol, p-tert-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry

    D7511 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection

    D7572 Standard Guide for Recovery of Aqueous Cyanides by Extraction from Mine Rock and Soil

    D7573 Standard Test Method for Total Carbon and Organic Carbon in Water by High Temperature Catalytic Combustion and Infrared Detection

    D7574 Standard Test Method for Determination of Bisphenol A in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry

    D7575 Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination

    D7597 Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Hydrogen Dimethylamidophosphate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Water by Liquid Chro

    D7598 Standard Test Method for Determination of Thiodiglycol in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry

    D7599 Standard Test Method for Determination of Diethanolamine, Triethanolamine, N-Methyldiethanolamine and N-Ethyldiethanolamine in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Sp

    D7600 Standard Test Method for Determination of Aldicarb, Carbofuran, Oxamyl and Methomyl by Liquid Chromatography/Tandem Mass Spectrometry

    D7644 Standard Test Method for Determination of Bromadiolone, Brodifacoum, Diphacinone and Warfarin in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)

    D7645 Standard Test Method for Determination of Aldicarb, Aldicarb Sulfone, Aldicarb Sulfoxide, Carbofuran, Methomyl, Oxamyl, and Thiofanox in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)

    D7678 Standard Test Method for Total Petroleum Hydrocarbons (TPH) in Water and Wastewater with Solvent Extraction using Mid-IR Laser Spectroscopy

    D7728 Standard Guide for Selection of ASTM Analytical Methods for Implementation of International Cyanide Management Code Guidance

    D7730 Standard Test Method for Determination of Dioctyl Sulfosuccinate in Sea Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)

    D7731 Standard Test Method for Determination of Dipropylene Glycol Monobutyl Ether and Ethylene Glycol Monobutyl Ether in Sea Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)

    D7742 Standard Practice for Determination of Nonylphenol Polyethoxylates (NPnEO, 3 ≤ n ≤ 18) and Octylphenol Polyethoxylates (OPnEO, 2 ≤ n ≤ n ≤ 12 in Water by Single Reaction Monitoring (SRM) Liquid Chromatography/ Tandem Mass Spe

    D7979 Standard Test Method for Determination of Perfluorinated Compounds in Water, Sludge, Influent, Effluent and Wastewater by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS)


    D04.47 - Miscellaneous Asphalt Tests

    D2042 Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene

    D3142/D3142M Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method

    D3143/D3143M Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus

    D3279 Standard Test Method for n-Heptane Insolubles

    D3289 Standard Test Method for Density of Semi-Solid and Solid Bituminous Materials (Nickel Crucible Method)

    D4124 Standard Test Method for Separation of Asphalt into Four Fractions

    D5546 Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge

    D6608 Standard Practice for the Identification of Trinidad Lake Asphalt in Asphalt Mixes

    D6703 Standard Test Method for Automated Heithaus Titrimetry

    D70 Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method)

    D7173 Standard Practice for Determining the Separation Tendency of Polymer from Polymer Modified Asphalt

    D7553 Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide


    D04.44 - Rheological Tests

    D113 Standard Test Method for Ductility of Bituminous Materials

    D139 Standard Test Method for Float Test for Bituminous Materials

    D2170/D2170M Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens)

    D2171/D2171M Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer

    D2493/D2493M Standard Viscosity-Temperature Chart for Asphalts

    D4957 Standard Test Method for Apparent Viscosity of Asphalt Emulsion Residues and Non-Newtonian Bitumens by Vacuum Capillary Viscometer

    D5/D5M Standard Test Method for Penetration of Bituminous Materials

    D5801 Standard Test Method for Toughness and Tenacity of Bituminous Materials

    D6084/D6084M Standard Test Method for Elastic Recovery of Bituminous Materials by Ductilometer

    D6648 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)

    D6723 Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)

    D6816 Standard Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders

    D7175 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer

    D7405 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer

    D7643 Standard Practice for Determining the Continuous Grading Temperatures and Continuous Grades for PG Graded Asphalt Binders

    D7741/D7741M Standard Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Hand Held Viscometer


    D03.08 - Thermophysical Properties

    D3956 Standard Specification for Methane Thermophysical Property Tables

    D3984 Standard Specification for Ethane Thermophysical Property Tables

    D4362 Standard Specification for Propane Thermophysical Property Tables

    D4650 Standard Specification for Normal Butane Thermophysical Property Tables

    D4651 Standard Specification for Isobutane Thermophysical Property Tables

    D4784 Standard for LNG Density Calculation Models

    D7265 Standard Specification for Hydrogen Thermophysical Property Tables


    D03.12 - On-Line/At-Line Analysis of Gaseous Fuels

    D7164 Standard Practice for On-line/At-line Heating Value Determination of Gaseous Fuels by Gas Chromatography

    D7165 Standard Practice for Gas Chromatograph Based On-line/At-line Analysis for Sulfur Content of Gaseous Fuels

    D7166 Standard Practice for Total Sulfur Analyzer Based On-line/At-line for Sulfur Content of Gaseous Fuels

    D7314 Standard Practice for Determination of the Heating Value of Gaseous Fuels using Calorimetry and On-line/At-line Sampling

    D7493 Standard Test Method for Online Measurement of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatograph and Electrochemical Detection

    D7607/D7607M Standard Test Method for Analysis of Oxygen in Gaseous Fuels (Electrochemical Sensor Method)

    D7904 Standard Test Method for Determination of Water Vapor (Moisture Concentration) in Natural Gas by Tunable Diode Laser Spectroscopy (TDLAS)

    D7940 Standard Practice for Analysis of Liquefied Natural Gas (LNG) by Fiber-Coupled Raman Spectroscopy


    D03.07 - Analysis of Chemical Composition of Gaseous Fuels

    D1945 Standard Test Method for Analysis of Natural Gas by Gas Chromatography

    D1946 Standard Practice for Analysis of Reformed Gas by Gas Chromatography

    D1988 Standard Test Method for Mercaptans in Natural Gas Using Length-of-Stain Detector Tubes

    D4810 Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes

    D4888 Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes

    D4984 Standard Test Method for Carbon Dioxide in Natural Gas Using Length-of-Stain Detector Tubes

    D7833 Standard Test Method for Determination of Hydrocarbons and Non-Hydrocarbon Gases in Gaseous Mixtures by Gas Chromatography


    D03.05 - Determination of Special Constituents of Gaseous Fuels

    D1072 Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration

    D1142 Standard Test Method for Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point Temperature

    D4084 Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method)

    D4468 Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Colorimetry

    D5454 Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers

    D5504 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence

    D5954 Standard Test Method for Mercury Sampling and Measurement in Natural Gas by Atomic Absorption Spectroscopy

    D6228 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection

    D6273 Standard Test Methods for Natural Gas Odor Intensity

    D6350 Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy

    D6968 Standard Test Method for Simultaneous Measurement of Sulfur Compounds and Minor Hydrocarbons in Natural Gas and Gaseous Fuels by Gas Chromatography and Atomic Emission Detection

    D7551 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases and Natural Gas by Ultraviolet Fluorescence

    D7800/D7800M Standard Test Method for Determination of Elemental Sulfur in Natural Gas


    D03.03 - Determination of Heating Value and Relative Density of Gaseous Fuels

    D1070 Standard Test Methods for Relative Density of Gaseous Fuels

    D1826 Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter

    D3588 Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels

    D4891 Standard Test Method for Heating Value of Gases in Natural Gas and Flare Gases Range by Stoichiometric Combustion


    D03.01 - Collection and Measurement of Gaseous Samples

    D1071 Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples

    D5287 Standard Practice for Automatic Sampling of Gaseous Fuels

    D5503 Standard Practice for Natural Gas Sample-Handling and Conditioning Systems for Pipeline Instrumentation


    D02.P0 - Recycled Products

    D6074 Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils

    D6448 Standard Specification for Industrial Burner Fuels from Used Lubricating Oils

    D6823 Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils

    D7666 Standard Specification for Triglyceride Burner Fuel


    D02.N0.10 - Specifications

    D6080 Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids

    D6158 Standard Specification for Mineral Hydraulic Oils


    D02.N0.09 - Compatibility

    D6546 Standard Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications

    D7752 Standard Practice for Evaluating Compatibility of Mixtures of Hydraulic Fluids


    D02.N0.08 - Thermal Stability

    D2070 Standard Test Method for Thermal Stability of Hydraulic Oils

    D2619 Standard Test Method for Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method)


    D02.N0.07 - Lubricating Properties

    D6813 Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps

    D6973 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump

    D7043 Standard Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump


    D02.N0.06 - Fire Resistant Fluids

    D5306 Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids


    D02.N0.03 - ECO - Evaluated Fluids

    D6046 Standard Classification of Hydraulic Fluids for Environmental Impact


    D02.N0.02 - Industrial Applications

    D3707 Standard Test Method for Storage Stability of Water-in-Oil Emulsions by the Oven Test Method

    D3709 Standard Test Method for Stability of Water-in-Oil Emulsions Under Low to Ambient Temperature Cycling Conditions

    D4174 Standard Practice for Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems

    D4898 Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis

    D5534 Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids

    D6547 Standard Test Method for Corrosiveness of Lubricating Fluid to Bimetallic Couple


    D02.N0 - Hydraulic Fluids

    D2155 Standard Test Method for Determination of Fire Resistance of Aircraft Hydraulic Fluids by Autoignition Temperature

    D6351 Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids

    D7044 Standard Specification for Biodegradable Fire Resistant Hydraulic Fluids

    D7721 Standard Practice for Determining the Effect of Fluid Selection on Hydraulic System or Component Efficiency


    D02.L0.11 - Tribiological Properties of Industrial Fluids and Lubricates

    D2422 Standard Classification of Industrial Fluid Lubricants by Viscosity System

    D2670 Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method)

    D2782 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method)

    D2783 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)

    D3233 Standard Test Methods for Measurement of Extreme Pressure Properties of Fluid Lubricants (Falex Pin and Vee Block Methods)

    D4172 Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method)

    D5182 Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)

    D5183 Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine

    D6425 Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine


    D02.L0.07 - Engineering Sciences of High Performance Fluids and Solids (Formally D02.1100)

    D2715 Standard Test Method for Volatilization Rates of Lubricants in Vacuum

    D2717 Standard Test Method for Thermal Conductivity of Liquids

    D2766 Standard Test Method for Specific Heat of Liquids and Solids

    D2878 Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils

    D2879 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope

    D2883 Standard Test Method for Reaction Threshold Temperature of Liquid and Solid Materials

    D2884 Standard Test Method for Yield Stress of Heterogeneous Propellants by Cone Penetration Method

    D3115 Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear

    D3429 Standard Test Method for Solubility of Fixed Gases in Low-Boiling Liquids

    D3523 Standard Test Method for Spontaneous Heating Values of Liquids and Solids (Differential Mackey Test)

    D3711 Standard Test Method for Deposition Tendencies of Liquids in Thin Films and Vapors

    D3825 Standard Test Method for Dynamic Surface Tension by the Fast-Bubble Technique

    D4056 Standard Test Method for Estimation of Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants

    D4486 Standard Test Method for Kinematic Viscosity of Volatile and Reactive Liquids

    D6668 Standard Test Method for Discrimination Between Flammability Ratings of F = 0 and F = 1

    D6793 Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus


    D02.L0.06 - Non-Lubricating Process Fluids

    D5372 Standard Guide for Evaluation of Hydrocarbon Heat Transfer Fluids

    D6200 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis

    D6482 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)

    D6549 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)

    D6666 Standard Guide for Evaluation of Aqueous Polymer Quenchants

    D6710 Standard Guide for Evaluation of Hydrocarbon-Based Quench Oil

    D7646 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis

    D7665 Standard Guide for Evaluation of Biodegradable Heat Transfer Fluids

    D7863 Standard Guide for Evaluation of Convective Heat Transfer Coefficient of Liquids


    D02.L0.05 - Solid Lubricants

    D2511 Standard Test Method for Thermal Shock Sensitivity of Solid Film Lubricants

    D2625 Standard Test Method for Endurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants (Falex Pin and Vee Method)

    D2649 Standard Test Method for Corrosion Characteristics of Solid Film Lubricants

    D2714 Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine

    D2981 Standard Test Method for Wear Life of Solid Film Lubricants in Oscillating Motion

    D3702 Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine

    D3704 Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion

    D7217 Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine


    D02.L0.04 - Metal Deformation Fluids and Lubricants

    D2881 Standard Classification for Metalworking Fluids and Related Materials

    D3342 Standard Test Method for Dispersion Stability of New (Unused) Rolling Oil Dispersions in Water

    D4042 Standard Test Method for Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of Rolling Oils


    D02.L0.03 - Corrosion Testing of Sheet Metal Processing Fluids

    D1748 Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet


    D02.L0.02 - Machinery Lubricants (Combined into L.01)


    D02.L0.01 - Metal Removal Fluids and Lubricants

    D1662 Standard Test Method for Active Sulfur in Cutting Oils

    D2711 Standard Test Method for Demulsibility Characteristics of Lubricating Oils

    D3705 Standard Test Method for Misting Properties of Lubricating Fluids

    D4627 Standard Test Method for Iron Chip Corrosion for Water–Miscible Metalworking Fluids

    D5619 Standard Test Method for Comparing Metal Removal Fluids Using the Tapping Torque Test Machine

    D6203 Standard Test Method for Thermal Stability of Way Lubricants

    D6553 Standard Test Method for Coolant Compatibility of Way Lubricants


    D02.L0 - Industrial Lubricants and Engineering Sciences of High Performance Fluids and Solids

    D2510 Standard Test Method for Adhesion of Solid Film Lubricants

    D2779 Standard Test Method for Estimation of Solubility of Gases in Petroleum Liquids

    D3827 Standard Test Method for Estimation of Solubility of Gases in Petroleum and Other Organic Liquids

    D6743 Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids

    D7421 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Oils Using High-Frequency, Linear-Oscillation (SRV) Test Machine

    D7755 Standard Practice for Determining the Wear Volume on Standard Test Pieces Used by High-Frequency, Linear-Oscillation (SRV) Test Machine



    D02.J0.06 - Emerging Turbine Fuels

    D7566 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons


    D02.J0.05 - Fuel Cleanliness

    D1094 Standard Test Method for Water Reaction of Aviation Fuels

    D2276 Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling

    D3240 Standard Test Method for Undissolved Water In Aviation Turbine Fuels

    D3948 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer

    D5452 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration

    D7797 Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy – Rapid Screening Method

    D7959 Standard Test Method for Chloride Content Determination


    D02.J0.04 - Additives and Electrical Properties

    D2624 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels

    D4054 Standard Practice for Qualification and Approval of New Aviation Turbine Fuels and Fuel Additives

    D4171 Standard Specification for Fuel System Icing Inhibitors

    D4306 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination

    D4308 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter

    D4865 Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems

    D5001 Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)

    D5006 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels


    D02.J0.03 - Combustion and Thermal Properties

    D1322 Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel

    D3241 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels

    D7739 Standard Practice for Thermal Oxidative Stability Measurement via Quartz Crystal Microbalance


    D02.J0.02 - Spark and Compression Ignition Aviation Engine Fuels

    D6227 Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component

    D6424 Standard Practice for Octane Rating Naturally Aspirated Spark Ignition Aircraft Engines

    D6812 Standard Practice for Ground-Based Octane Rating Procedures for Turbocharged/Supercharged Spark Ignition Aircraft Engines

    D7547 Standard Specification for Hydrocarbon Unleaded Aviation Gasoline

    D7592 Standard Specification for Specification for Grade 94 Unleaded Aviation Gasoline Certification and Test Fuel

    D7719 Standard Specification for High Aromatic Content Unleaded Hydrocarbon Aviation Gasoline

    D7796 Standard Test Method for Analysis of Ethyl tert-Butyl Ether (ETBE) by Gas Chromatography

    D7826 Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives

    D7960 Standard Specification for Unleaded Aviation Gasoline Test Fuel

    D910 Standard Specification for Leaded Aviation Gasolines


    D02.J0.01 - Jet Fuel Specifications

    D1655 Standard Specification for Aviation Turbine Fuels

    D6615 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel

    D6824 Standard Test Method for Determining Filterability of Aviation Turbine Fuel

    D7872 Standard Test Method for Determining the Concentration of Pipeline Drag Reducer Additive in Aviation Turbine Fuels


    D02.J0 - Aviation Fuels

    D6986 Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)

    D7223 Standard Specification for Aviation Certification Turbine Fuel

    D7224 Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer

    D7618 Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel


    D02.H0 - Liquefied Petroleum Gas

    D1265 Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method

    D1267 Standard Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method)

    D1835 Standard Specification for Liquefied Petroleum (LP) Gases

    D1837 Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases

    D1838 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases

    D2158 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases

    D2420 Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)

    D2421 Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis

    D2597 Standard Test Method for Analysis of Demethanized Hydrocarbon Liquid Mixtures Containing Nitrogen and Carbon Dioxide by Gas Chromatography

    D2598 Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis

    D2713 Standard Test Method for Dryness of Propane (Valve Freeze Method)

    D3700 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder

    D5305 Standard Test Method for Determination of Ethyl Mercaptan in LP-Gas Vapor

    D7756 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases by Gas Chromatography with Liquid, On-Column Injection

    D7828 Standard Test Method for Determination of Residue Composition in Liquefied Petroleum Gas (LPG) Using Automated Thermal Desorption/Gas Chromatography (ATD/GC)

    D7901 Standard Specification for Dimethyl Ether for Fuel Purposes


    D02.G0.07 - Research Techniques

    D7342 Standard Test Method for Shear Stability of Lubricating Grease in Presence of Water (Water Stability Test)

    D7527 Standard Test Method for Measurement of Antioxidant Content in Lubricating Greases by Linear Sweep Voltammetry


    D02.G0.06 - Functional Tests - Contamination

    D1264 Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases

    D1743 Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases

    D4049 Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray

    D5969 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments

    D6138 Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)


    D02.G0.05 - Functional Tests - Temperature

    D1478 Standard Test Method for Low-Temperature Torque of Ball Bearing Grease

    D3336 Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures

    D3527 Standard Test Method for Life Performance of Automotive Wheel Bearing Grease

    D4290 Standard Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions


    D02.G0.04 - Functional Tests - Tribology

    D2266 Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method)

    D2509 Standard Test Method for Measurement of Load-Carrying Capacity of Lubricating Grease (Timken Method)

    D2596 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)

    D4170 Standard Test Method for Fretting Wear Protection by Lubricating Greases

    D5707 Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

    D7594 Standard Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian Contact Pressures Using a High-Frequency, Linear-Oscillation (SRV) Test Machine


    D02.G0.03 - Physical Tests

    D1742 Standard Test Method for Oil Separation from Lubricating Grease During Storage

    D2265 Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range

    D2595 Standard Test Method for Evaporation Loss of Lubricating Greases Over Wide-Temperature Range

    D4425 Standard Test Method for Oil Separation from Lubricating Grease by Centrifuging (Koppers Method)

    D566 Standard Test Method for Dropping Point of Lubricating Grease

    D6184 Standard Test Method for Oil Separation from Lubricating Grease (Conical Sieve Method)

    D972 Standard Test Method for Evaporation Loss of Lubricating Greases and Oils


    D02.G0.02 - Consistency and Related Rheological Tests

    D1092 Standard Test Method for Measuring Apparent Viscosity of Lubricating Greases

    D1403 Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment

    D1831 Standard Test Method for Roll Stability of Lubricating Grease

    D217 Standard Test Methods for Cone Penetration of Lubricating Grease


    D02.G0.01 - Chemical and General Laboratory Tests

    D128 Standard Test Methods for Analysis of Lubricating Grease

    D1404/D1404M Standard Test Method for Estimation of Deleterious Particles in Lubricating Grease

    D4048 Standard Test Method for Detection of Copper Corrosion from Lubricating Grease

    D4289 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids

    D6185 Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases


    D02.G0 - Lubricating Grease

    D4693 Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings

    D5706 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

    D7420 Standard Test Method for Determining Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

    D7718 Standard Practice for Obtaining In-Service Samples of Lubricating Grease


    D02.F0 - Manufactured Carbon and Graphite Products

    C1025 Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite

    C1039 Standard Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes

    C1179 Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air

    C559 Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles

    C560 Standard Test Methods for Chemical Analysis of Graphite

    C561 Standard Test Method for Ash in a Graphite Sample

    C562 Standard Test Method for Moisture in a Graphite Sample

    C565 Standard Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials

    C611 Standard Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature

    C625 Standard Practice for Reporting Irradiation Results on Graphite

    C651 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature

    C662 Standard Specification for Impervious Graphite Pipe and Threading

    C695 Standard Test Method for Compressive Strength of Carbon and Graphite

    C709 Standard Terminology Relating to Manufactured Carbon and Graphite

    C714 Standard Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method

    C747 Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance

    C748 Standard Test Method for Rockwell Hardness of Graphite Materials

    C749 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite

    C769 Standard Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining Young's Modulus

    C781 Standard Practice for Testing Graphite and Boronated Graphite Materials for High-Temperature Gas-Cooled Nuclear Reactor Components

    C783 Standard Practice for Core Sampling of Graphite Electrodes

    C808 Standard Guideline for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials

    C816 Standard Test Method for Sulfur in Graphite by Combustion-Iodometric Titration Method

    C838 Standard Test Method for Bulk Density of As-Manufactured Carbon and Graphite Shapes

    C886 Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials

    D7219 Standard Specification for Isotropic and Near-isotropic Nuclear Graphites

    D7301 Standard Specification for Nuclear Graphite Suitable for Components Subjected to Low Neutron Irradiation Dose

    D7542 Standard Test Method for Air Oxidation of Carbon and Graphite in the Kinetic Regime

    D7775 Standard Guide for Measurements on Small Graphite Specimens

    D7779 Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature

    D7846 Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Graphites

    D7972 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature


    D02.E0 - Burner, Diesel, Non-Aviation Gas Turbine, and Marine Fuels

    D187 Standard Test Method for Burning Quality of Kerosine

    D2156 Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels

    D2157 Standard Test Method for Effect of Air Supply on Smoke Density in Flue Gases from Burning Distillate Fuels

    D2880 Standard Specification for Gas Turbine Fuel Oils

    D3699 Standard Specification for Kerosine

    D396 Standard Specification for Fuel Oils

    D4418 Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines

    D4737 Standard Test Method for Calculated Cetane Index by Four Variable Equation

    D6078 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE)

    D6079 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)

    D6751 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels

    D6898 Standard Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig

    D7467 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)

    D7544 Standard Specification for Pyrolysis Liquid Biofuel

    D7688 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) by Visual Observation

    D975 Standard Specification for Diesel Fuel Oils

    D976 Standard Test Method for Calculated Cetane Index of Distillate Fuels


    D02.D0.04 - C4 Hydrocarbons

    D1025 Standard Test Method for Nonvolatile Residue of Polymerization-Grade Butadiene

    D1157 Standard Test Method for Total Inhibitor Content (TBC) of Light Hydrocarbons

    D2384 Standard Test Methods for Traces of Volatile Chlorides in Butane-Butene Mixtures

    D2426 Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography

    D2593 Standard Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography

    D4423 Standard Test Method for Determination of Carbonyls In C4 Hydrocarbons

    D4424 Standard Test Method for Butylene Analysis by Gas Chromatography

    D5274 Standard Guide for Analysis of 1,3–Butadiene Product

    D5799 Standard Test Method for Determination of Peroxides in Butadiene

    D7423 Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection


    D02.D0.03 - Propylene

    D2163 Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography

    D2712 Standard Test Method for Hydrocarbon Traces in Propylene Concentrates By Gas Chromatography

    D4864 Standard Test Method for Determination of Traces of Methanol in Propylene Concentrates by Gas Chromatography

    D5273 Standard Guide for Analysis of Propylene Concentrates

    D5303 Standard Test Method for Trace Carbonyl Sulfide in Propylene by Gas Chromatography


    D02.D0.02 - Ethylene

    D2504 Standard Test Method for Noncondensable Gases in C2 and Lighter Hydrocarbon Products by Gas Chromatography

    D2505 Standard Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography

    D5234 Standard Guide for Analysis of Ethylene Product

    D6159 Standard Test Method for Determination of Hydrocarbon Impurities in Ethylene by Gas Chromatography


    D02.D0 - Hydrocarbons for Chemical and Special Uses

    D4178 Standard Practice for Calibrating Moisture Analyzers


    D02.C0.02 - Corrosion and Water/Air Separability

    D1401 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids

    D3427 Standard Test Method for Air Release Properties of Petroleum Oils

    D3603 Standard Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method)

    D665 Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water


    D02.C0.01 - Turbine Oil Monitoring, Problems and Systems

    D4293 Standard Specification for Phosphate Ester Based Fluids for Turbine Lubrication

    D4304 Standard Specification for Mineral and Synthetic Lubricating Oil Used in Steam or Gas Turbines

    D4378 Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines

    D6224 Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment

    D6439 Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems


    D02.C0 - Turbine Oils

    D7155 Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils

    D7843 Standard Test Method for Measurement of Lubricant Generated Insoluble Color Bodies in In-Service Turbine Oils using Membrane Patch Colorimetry


    D02.B0.10 - Standards Acceleration

    D7589 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine


    D02.B0.07 - Development and Surveillance of Bench Tests Methods

    D7216 Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers

    D7528 Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus

    D7563 Standard Test Method for Evaluation of the Ability of Engine Oil to Emulsify Water and Simulated Ed85 Fuel


    D02.B0.06 - Two-Stroke Cycle Gasoline

    D4682 Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants

    D4857 Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards

    D4858 Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines

    D4859 Standard Specification for Lubricants for Two-Stroke-Cycle Spark-Ignition Gasoline Engines-TC

    D4863 Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants


    D02.B0.04 - Automotive Greases

    D4950 Standard Classification and Specification for Automotive Service Greases


    D02.B0.03 - Automotive Gear Lubricants & Fluids

    D4998 Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids

    D5579 Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test

    D5662 Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers

    D5704 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles

    D5760 Standard Specification for Performance of Manual Transmission Gear Lubricants

    D6121 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles

    D7452 Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading


    D02.B0.02 - Heavy Duty Engine Oils

    D5966 Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine

    D5967 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine

    D5968 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121°C

    D6594 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135°C

    D6618 Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine

    D6681 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure

    D6750 Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)

    D6838 Standard Test Method for Cummins M11 High Soot Test

    D6894 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine

    D6975 Standard Test Method for Cummins M11 EGR Test


    D02.B0 - Automotive Lubricants

    D3524 Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography

    D3525 Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography

    D4485 Standard Specification for Performance of Active API Service Category Engine Oils

    D6794 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long(6 h) Heating Time

    D6795 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30 min) Heating Time

    D6891 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine

    D6922 Standard Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils

    D6923 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure

    D6987/D6987M Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine

    D7038 Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants

    D7156 Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine

    D7422 Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine

    D7450 Standard Specification for Performance of Rear Axle Gear Lubricants Intended for API Category GL-5 Service

    D7468 Standard Test Method for Cummins ISM Test

    D7484 Standard Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine

    D7549 Standard Test Method for Evaluation of Heavy-Duty Engine Oils under High Output Conditions—Caterpillar C13 Test Procedure


    D02.B0.01 - Passenger Car Engine Oils

    D6557 Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils

    D6593 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions

    D6709 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine)

    D6837 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIB Spark Ignition Engine

    D6984 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine

    D7320 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine

    D7603 Standard Test Method for Determination of Storage Stability and Compatibility in Automotive Gear Oils


    D02.A0.02 - Oxygenated Fuels and Components

    D4806 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel

    D5797 Standard Specification for Fuel Methanol (M70-M85) for Automotive Spark-Ignition Engines

    D5798 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines

    D5983 Standard Specification for Methyl Tertiary-Butyl Ether (MTBE) for Downstream Blending for Use in Automotive Spark-Ignition Engine Fuel

    D6423 Standard Test Method for Determination of pHe of Denatured Fuel Ethanol and Ethanol Fuel Blends

    D7794 Standard Practice for Blending Mid-Level Ethanol Fuel Blends for Flexible-Fuel Vehicles with Automotive Spark-Ignition Engines


    D02.A0.01 - Gasoline and Gasoline-Oxygenate Blends

    D4814 Standard Specification for Automotive Spark-Ignition Engine Fuel

    D5500 Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation

    D5598 Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling

    D6201 Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation

    D6421 Standard Test Method for Evaluating Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling by Bench Procedure


    D02.A0 - Gasoline and Oxygenated Fuels

    D7862 Standard Specification for Butanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel

















    D02.96.07 - Integrated Testers, Instrumentation Techniques for In-Service Lubricants

    D7685 Standard Practice for In-Line, Full Flow, Inductive Sensor for Ferromagnetic and Non-ferromagnetic Wear Debris Determination and Diagnostics for Aero-Derivative and Aircraft Gas Turbine Engine Bearings

    D7917 Standard Practice for Inductive Wear Debris Sensors in Gearbox and Drivetrain Applications


    D02.96.06 - Practices and Techniques for Prediction and Determination of Microscopic Wear and Wear-related Properties

    D7670 Standard Practice for Processing In-service Fluid Samples for Particulate Contamination Analysis Using Membrane Filters

    D7684 Standard Guide for Microscopic Characterization of Particles from In-Service Lubricants

    D7690 Standard Practice for Microscopic Characterization of Particles from In-Service Lubricants by Analytical Ferrography

    D7919 Standard Guide for Filter Debris Analysis (FDA) Using Manual or Automated Processes


    D02.96.05 - In-Service Lubricants Particle Counting Practices and Techniques

    D7647 Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction


    D02.96.04 - Guidelines for In-Services Lubricants Analysis

    D7669 Standard Guide for Practical Lubricant Condition Data Trend Analysis

    D7720 Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination

    D7874 Standard Guide for Applying Failure Mode and Effect Analysis (FMEA) to In-Service Lubricant Testing

    D7973 Standard Guide for Monitoring Failure Mode Progression in Plain Bearings


    D02.96.03 - FTIR Testing Practices and Techniques Related to In-Service Lubricants

    D7624 Standard Test Method for Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

    D7844 Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry

    D7889 Standard Test Method for Field Determination of In-Service Fluid Properties Using IR Spectroscopy


    D02.96.02 - Chemistry for the Evaluation of In-Service Lubricants

    D7546 Standard Test Method for Determination of Moisture in New and In-Service Lubricating Oils and Additives by Relative Humidity Sensor

    D7593 Standard Test Method for Determination of Fuel Dilution for In-Service Engine Oils by Gas Chromatography

    D7899 Standard Test Method for Measuring the Merit of Dispersancy of In-Service Engine Oils with Blotter Spot Method


    D02.96 - In-Service Lubricant Testing and Condition Monitoring Services

    D7214 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation

    D7412 Standard Test Method for Condition Monitoring of Phosphate Antiwear Additives in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

    D7414 Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

    D7415 Standard Test Method for Condition Monitoring of Sulfate By-Products in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

    D7416 Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Viscome

    D7417 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)

    D7418 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring

    D7596 Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester

    D7686 Standard Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) Instrument

    D7898 Standard Practice for Lubrication and Hydraulic Filter Debris Analysis (FDA) for Condition Monitoring of Machinery

    E2412 Standard Practice for Condition Monitoring of Used Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry


    D02.95 - Terminology

    D4175 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants


    D02.94.01 - Task Group A: Quality Assurance and Quality Control

    D7776 Standard Guide for Self-Assessment of Quality System Practices in Petroleum Products and Lubricant Testing Laboratories

    D7778 Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method


    D02.94 - Coordinating Subcommittee on Quality Assurance and Statistics

    D3244 Standard Practice for Utilization of Test Data to Determine Conformance with Specifications

    D6259 Standard Practice for Determination of a Pooled Limit of Quantitation

    D6299 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance

    D6300 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants

    D6617 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material

    D6708 Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material

    D6792 Standard Practice for Quality System in Petroleum Products and Lubricants Testing Laboratories

    D7372 Standard Guide for Analysis and Interpretation of Proficiency Test Program Results

    D7915 Standard Practice for Application of Generalized Extreme Studentized Deviate (GESD) Technique to Simultaneously Identify Multiple Outliers in a Data Set


    D02.25 - Performance Assessment and Validation of Process Stream Analyzer Systems

    D3764 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems

    D6122 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems

    D6624 Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data

    D7235 Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices

    D7278 Standard Guide for Prediction of Analyzer Sample System Lag Times

    D7453 Standard Practice for Sampling of Petroleum Products for Analysis by Process Stream Analyzers and for Process Stream Analyzer System Validation

    D7808 Standard Practice for Determining the Site Precision of a Process Stream Analyzer on Process Stream Material

    D7825 Standard Guide for Generating a Process Stream Property Value through the Application of a Process Stream Analyzer


    D02.14 - Stability and Cleanliness of Liquid Fuels

    D2068 Standard Test Method for Determining Filter Blocking Tendency

    D2274 Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)

    D2709 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge

    D381 Standard Test Method for Gum Content in Fuels by Jet Evaporation

    D4176 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)

    D4625 Standard Test Method for Middle Distillate Fuel Storage Stability at 43 °C (110 °F)

    D4740 Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test

    D4860 Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating)

    D4870 Standard Test Method for Determination of Total Sediment in Residual Fuels

    D525 Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method)

    D5304 Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure

    D5705 Standard Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils

    D6021 Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection

    D6217 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration

    D6426 Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils

    D6468 Standard Test Method for High Temperature Stability of Middle Distillate Fuels

    D6469 Standard Guide for Microbial Contamination in Fuels and Fuel Systems

    D6560 Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products

    D6748 Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer)

    D6974 Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures

    D7060 Standard Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)

    D7061 Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene-Containing Heavy Fuel Oils as Separability Number by an Optical Scanning Device

    D7112 Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)

    D7157 Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (n-Heptane Phase Separation; Optical Detection)

    D7261 Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer

    D7321 Standard Test Method for Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration

    D7451 Standard Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark Ignition Fuels

    D7462 Standard Test Method for Oxidation Stability of Biodiesel (B100) and Blends of Biodiesel with Middle Distillate Petroleum Fuel (Accelerated Method)

    D7463 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water

    D7464 Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing

    D7501 Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT)

    D7525 Standard Test Method for Oxidation Stability of Spark Ignition Fuel—Rapid Small Scale Oxidation Test (RSSOT)

    D7545 Standard Test Method for Oxidation Stability of Middle Distillate Fuels—Rapid Small Scale Oxidation Test (RSSOT)

    D7548 Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products

    D7577 Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends

    D7619 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter

    D7621 Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction

    D7687 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel, Fuel/Water Mixtures, and Fuel-Associated Water with Sample Concentration by Filtration

    D7827 Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene from Heavy Fuel Oils as Separability Number by an Optical Device

    D7847 Standard Guide for Interlaboratory Studies for Microbiological Test Methods

    D7963 Standard Test Method for Determination of Contamination Level of Fatty Acid Methyl Esters in Middle Distillate and Residual Fuels Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method

    D7978 Standard Test Method for Determination of the Viable Aerobic Microbial Content of Fuels and Associated Water—Thixotropic Gel Culture Method

    D873 Standard Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method)


    D02.12 - Environmental Standards for Lubricants

    D5864 Standard Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components

    D6006 Standard Guide for Assessing Biodegradability of Hydraulic Fluids

    D6081 Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation

    D6139 Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or Their Components Using the Gledhill Shake Flask

    D6384 Standard Terminology Relating to Biodegradability and Ecotoxicity of Lubricants

    D6731 Standard Test Method for Determining the Aerobic, Aquatic Biodegradability of Lubricants or Lubricant Components in a Closed Respirometer

    D7373 Standard Test Method for Predicting Biodegradability of Lubricants Using a Bio-kinetic Model


    D02.08 - Volatility

    D1160 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure

    D2892 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)

    D323 Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)

    D3828 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester

    D4953 Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)

    D5188 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber and Piston Based Method)

    D5191 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)

    D5236 Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method)

    D5482 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method—Atmospheric)

    D56 Standard Test Method for Flash Point by Tag Closed Cup Tester

    D6377 Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCRx (Expansion Method)

    D6378 Standard Test Method for Determination of Vapor Pressure (VPX) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)

    D6450 Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester

    D6849 Standard Practice for Storage and Use of Liquefied Petroleum Gases (LPG) in Sample Cylinders for LPG Test Methods

    D6897 Standard Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method)

    D7094 Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester

    D7236 Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)

    D7344 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Mini Method)

    D7345 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method)

    D7975 Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCRx-F(Tm°C) (Manual Expansion Field Method)

    D86 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure

    D92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester

    D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester


    D02.07 - Flow Properties

    D2161 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity

    D2162 Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards

    D2270 Standard Practice for Calculating Viscosity Index From Kinematic Viscosity at 40 and 100°C

    D2386 Standard Test Method for Freezing Point of Aviation Fuels

    D2500 Standard Test Method for Cloud Point of Petroleum Products

    D2532 Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants

    D2603 Standard Test Method for Sonic Shear Stability of Polymer-Containing Oils

    D2983 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer

    D341 Standard Practice for Viscosity-Temperature Charts for Liquid Petroleum Products

    D3829 Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil

    D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

    D446 Standard Specifications and Operating Instructions for Glass Capillary Kinematic Viscometers

    D4539 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)

    D4683 Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 °C

    D4684 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature

    D4741 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer

    D5133 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique

    D5275 Standard Test Method for Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids

    D5293 Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between –10 °C and –35 °C Using Cold-Cranking Simulator

    D5481 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer

    D5621 Standard Test Method for Sonic Shear Stability of Hydraulic Fluids

    D5771 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)

    D5772 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)

    D5773 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)

    D5853 Standard Test Method for Pour Point of Crude Oils

    D5949 Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)

    D5950 Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)

    D5972 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)

    D5985 Standard Test Method for Pour Point of Petroleum Products (Rotational Method)

    D6022 Standard Practice for Calculation of Permanent Shear Stability Index

    D6278 Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus

    D6371 Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels

    D6616 Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100°C

    D6749 Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)

    D6821 Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer

    D6892 Standard Test Method for Pour Point of Petroleum Products (Robotic Tilt Method)

    D6895 Standard Test Method for Rotational Viscosity of Heavy Duty Diesel Drain Oils at 100°C

    D6896 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature

    D7042 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)

    D7109 Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus at 30 and 90 Cycles

    D7110 Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures

    D7152 Standard Practice for Calculating Viscosity of a Blend of Petroleum Products

    D7153 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)

    D7154 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)

    D7279 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer

    D7346 Standard Test Method for No Flow Point and Pour Point of Petroleum Products

    D7397 Standard Test Method for Cloud Point of Petroleum Products (Miniaturized Optical Method)

    D7483 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer

    D7683 Standard Test Method for Cloud Point of Petroleum Products (Small Test Jar Method)

    D7689 Standard Test Method for Cloud Point of Petroleum Products (Mini Method)

    D7945 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer

    D97 Standard Test Method for Pour Point of Petroleum Products


    D02.05 - Properties of Fuels, Petroleum Coke and Carbon Material

    D130 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test

    D1405/D1405M Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

    D1500 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)

    D156 Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)

    D2318 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch

    D2319/D2319M Standard Test Method for Softening Point of Pitch (Cube-in-Air Method)

    D2320 Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)

    D2392 Standard Test Method for Color of Dyed Aviation Gasolines

    D240 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter

    D2415 Standard Test Method for Ash in Coal Tar and Pitch

    D2416 Standard Test Method for Coking Value of Tar and Pitch (Modified Conradson)

    D2638 Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer

    D2764 Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch

    D3104 Standard Test Method for Softening Point of Pitches (Mettler Softening Point Method)

    D3338/D3338M Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

    D3461 Standard Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method)

    D3703 Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels, Gasoline and Diesel Fuels

    D4072 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch

    D4292 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke

    D4296 Standard Practice for Sampling Pitch

    D4312 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)

    D4422 Standard Test Method for Ash in Analysis of Petroleum Coke

    D4529 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

    D4616 Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch

    D4715 Standard Test Method for Coking Value of Tar and Pitch (Alcan)

    D4746 Standard Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration

    D4809 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)

    D4868 Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels

    D4892 Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)

    D4893 Standard Test Method for Determination of Pitch Volatility

    D4930 Standard Test Method for Dust Control Material on Calcined Petroleum Coke

    D4931 Standard Test Method for Gross Moisture in Green Petroleum Coke

    D5003 Standard Test Method for Hardgrove Grindability Index (HGI) of Petroleum Coke

    D5004 Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement

    D5018 Standard Test Method for Shear Viscosity of Coal-Tar and Petroleum Pitches

    D5187 Standard Test Method for Determination of Crystallite Size (Lc of Calcined Petroleum Coke by X-Ray Diffraction

    D5502 Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry

    D5709 Standard Test Method for Sieve Analysis of Petroleum Coke

    D6045 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method

    D61 Standard Test Method for Softening Point of Pitches (Cube-in-Water Method)

    D6120 Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature

    D6258 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels

    D6353 Standard Guide for Sampling Plan and Core Sampling for Prebaked Anodes Used in Aluminum Production

    D6354 Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production

    D6374 Standard Test Method for Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure

    D6376 Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-Ray Fluorescence Spectroscopy

    D6447 Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis

    D6558 Standard Test Method for Determination of TGA CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks

    D6559 Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks

    D6744 Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique

    D6745 Standard Test Method for Linear Thermal Expansion of Electrode Carbons

    D6756 Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer

    D6791 Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke

    D6969 Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis

    D6970 Standard Practice for Collection of Calcined Petroleum Coke Samples for Analysis

    D7058 Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer

    D7095 Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip

    D71 Standard Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)

    D7280 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch by Stainless Steel Crucible Filtration

    D7454 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus


    D02.06 - Analysis of Liquid Fuels and Lubricants

    D1093 Standard Test Method for Acidity of Hydrocarbon Liquids and Their Distillation Residues

    D189 Standard Test Method for Conradson Carbon Residue of Petroleum Products

    D2273 Standard Test Method for Trace Sediment in Lubricating Oils

    D2896 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration

    D2982 Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils

    D322 Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation

    D3242 Standard Test Method for Acidity in Aviation Turbine Fuel

    D3339 Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration

    D3607 Standard Test Method for Removing Volatile Contaminants from Used Engine Oils by Stripping

    D4055 Standard Test Method for Pentane Insolubles by Membrane Filtration

    D4530 Standard Test Method for Determination of Carbon Residue (Micro Method)

    D4739 Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration

    D483 Standard Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils

    D524 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products

    D565 Standard Test Method for Carbonizable Substances in White Mineral Oil

    D5770 Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing

    D5800 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method

    D5984 Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration

    D6082 Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils

    D6375 Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method

    D664 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration

    D7317 Standard Test Method for Coagulated Pentane Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method)

    D7579 Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol

    D7795 Standard Test Method for Acidity in Ethanol and Ethanol Blends by Titration

    D7946 Standard Test Method for Initial pH (i-pH)-Value of Petroleum Products

    D892 Standard Test Method for Foaming Characteristics of Lubricating Oils

    D893 Standard Test Method for Insolubles in Used Lubricating Oils

    D91 Standard Test Method for Precipitation Number of Lubricating Oils

    D94 Standard Test Methods for Saponification Number of Petroleum Products

    D974 Standard Test Method for Acid and Base Number by Color-Indicator Titration


    D02.03 - Elemental Analysis

    C1234 Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations

    D1018 Standard Test Method for Hydrogen In Petroleum Fractions

    D1091 Standard Test Methods for Phosphorus in Lubricating Oils and Additives

    D1266 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)

    D129 Standard Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method)

    D1318 Standard Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method)

    D1552 Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and IR Detection

    D1839 Standard Test Method for Amyl Nitrate in Diesel Fuels

    D2622 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry

    D2784 Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp)

    D3120 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry

    D3227 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)

    D3228 Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method

    D3230 Standard Test Method for Salts in Crude Oil (Electrometric Method)

    D3231 Standard Test Method for Phosphorus in Gasoline

    D3237 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy

    D3246 Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry

    D3341 Standard Test Method for Lead in Gasoline - Iodine Monochloride Method

    D3348 Standard Test Method for Rapid Field Test for Trace Lead in Unleaded Gasoline (Colorimetric Method)

    D3605 Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy

    D3701 Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry

    D3831 Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy

    D4045 Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry

    D4046 Standard Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry

    D4047 Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method

    D4294 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry

    D4628 Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry

    D4629 Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection

    D4808 Standard Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy

    D482 Standard Test Method for Ash from Petroleum Products

    D4927 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy

    D4929 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil

    D4951 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry

    D4952 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)

    D5056 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption

    D5059 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy

    D5184 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry

    D5185 Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

    D5291 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants

    D5384 Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)

    D5453 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence

    D5600 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

    D5622 Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis

    D5708 Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry

    D5761 Standard Practice for Emulsification/Suspension of Multiphase Fluid Waste Materials

    D5762 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence

    D5863 Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry

    D6334 Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence

    D6443 Standard Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)

    D6470 Standard Test Method for Salt in Crude Oils (Potentiometric Method)

    D6481 Standard Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy

    D6595 Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry

    D6667 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence

    D6728 Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry

    D6732 Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry

    D6920 Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection

    D7039 Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry

    D7040 Standard Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry

    D7041 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels, and Oils by Online Gas Chromatography with Flame Photometric Detection

    D7111 Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

    D7171 Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy

    D7212 Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter

    D7220 Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry

    D7260 Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants

    D7303 Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry

    D7318 Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration

    D7319 Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography

    D7328 Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection

    D7343 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants

    D7455 Standard Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis

    D7482 Standard Practice for Sampling, Storage, and Handling of Hydrocarbons for Mercury Analysis

    D7578 Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants

    D7620 Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection

    D7622 Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction

    D7623 Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method

    D7691 Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

    D7740 Standard Practice for Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants

    D7751 Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis

    D7757 Standard Test Method for Silicon in Gasoline and Related Products by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry

    D7876 Standard Practice for Practice for Sample Decomposition Using Microwave Heating (With or Without Prior Ashing) for Atomic Spectroscopic Elemental Determination in Petroleum Products and Lubricants

    D808 Standard Test Method for Chlorine in New and Used Petroleum Products (High Pressure Decomposition Device Method)

    D874 Standard Test Method for Sulfated Ash from Lubricating Oils and Additives


    D02.02.10 - Sediment and Water (API MPMS Chapter 10.0)

    D6304 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration


    D02.02.09 - Density Determination (API MPMS Chapter 9.0)

    D6822 Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method


    D02.02.08 - Sampling (API MPMS Chapter 8.0)

    D5842 Standard Practice for Sampling and Handling of Fuels for Volatility Measurement

    D5854 Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products


    D02.02.07 - Temperature Determination (API MPMS Chapter 7.0)

    D1550 Standard ASTM Butadiene Measurement Tables

    D2962 Standard Practice for Calculating Volume-Temperature Correction For Coal-Tar Pitches


    D02.02 - Hydrocarbon Measurement for Custody Transfer (Joint ASTM-API)

    D1250 Standard Guide for Use of the Petroleum Measurement Tables

    D1298 Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method

    D1657 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer

    D1744 Standard Test Method for Determination of Water in Liquid Petroleum Products by Karl Fischer Reagent

    D1796 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)

    D287 Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)

    D4006 Standard Test Method for Water in Crude Oil by Distillation

    D4007 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)

    D4057 Standard Practice for Manual Sampling of Petroleum and Petroleum Products

    D4177 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products

    D4377 Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration

    D473 Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method

    D4807 Standard Test Method for Sediment in Crude Oil by Membrane Filtration

    D4928 Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration

    D7829 Standard Guide for Sediment and Water Determination in Crude Oil

    D95 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation


    D02.01 - Combustion Characteristics

    D2699 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel

    D2700 Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel

    D2885 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique

    D613 Standard Test Method for Cetane Number of Diesel Fuel Oil

    D6890 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber

    D7170 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Fixed Range Injection Period, Constant Volume Combustion Chamber Method

    D909 Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline