Metallurgy by Committee

    G01.14 - Corrosion of Metals in Construction Materials

    C876 Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete

    G109 Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments

    G180 Standard Test Method for Corrosion Inhibiting Admixtures for Steel in Concrete by Polarization Resistance in Cementitious Slurries

    G198 Standard Test Method for Determining the Relative Corrosion Performance of Driven Fasteners in Contact with Treated Wood

    G4 Standard Guide for Conducting Corrosion Tests in Field Applications


    G01.11 - Electrochemical Measurements in Corrosion Testing

    G100 Standard Test Method for Conducting Cyclic Galvanostaircase Polarization

    G102 Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements

    G106 Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements

    G108 Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels

    G148 Standard Practice for Evaluation of Hydrogen Uptake, Permeation, and Transport in Metals by an Electrochemical Technique

    G150 Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels

    G189 Standard Guide for Laboratory Simulation of Corrosion Under Insulation

    G192 Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique

    G199 Standard Guide for Electrochemical Noise Measurement

    G3 Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing

    G5 Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements

    G59 Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements

    G61 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys

    G69 Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys

    G71 Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes

    G82 Standard Guide for Development and Use of a Galvanic Series for Predicting Galvanic Corrosion Performance

    G96 Standard Guide for Online Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods)


    G01.06 - Environmentally Assisted Cracking

    G103 Standard Practice for Evaluating Stress-Corrosion Cracking Resistance of Low Copper 7XXX Series Al-Zn-Mg-Cu Alloys in Boiling 6% Sodium Chloride Solution

    G123 Standard Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution

    G129 Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking

    G139 Standard Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using Breaking Load Method

    G142 Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both

    G168 Standard Practice for Making and Using Precracked Double Beam Stress Corrosion Specimens

    G186 Standard Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause Stress Corrosion Cracking of Brass Alloys

    G188 Standard Specification for Leak Detector Solutions Intended for Use on Brasses and Other Copper Alloys

    G30 Standard Practice for Making and Using U-Bend Stress-Corrosion Test Specimens

    G35 Standard Practice for Determining the Susceptibility of Stainless Steels and Related Nickel-Chromium-Iron Alloys to Stress-Corrosion Cracking in Polythionic Acids

    G36 Standard Practice for Evaluating Stress-Corrosion-Cracking Resistance of Metals and Alloys in a Boiling Magnesium Chloride Solution

    G37 Standard Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress- Corrosion Cracking Susceptibility of Copper-Zinc Alloys

    G38 Standard Practice for Making and Using C-Ring Stress-Corrosion Test Specimens

    G39 Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens

    G41 Standard Practice for Determining Cracking Susceptibility of Metals Exposed Under Stress to a Hot Salt Environment

    G44 Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5 % Sodium Chloride Solution

    G47 Standard Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products

    G49 Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens

    G58 Standard Practice for Preparation of Stress-Corrosion Test Specimens for Weldments

    G64 Standard Classification of Resistance to Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys


    G01.05 - Laboratory Corrosion Tests

    B117 Standard Practice for Operating Salt Spray (Fog) Apparatus

    G1 Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens

    G107 Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input

    G110 Standard Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solution

    G111 Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both

    G112 Standard Guide for Conducting Exfoliation Corrosion Tests in Aluminum Alloys

    G135 Standard Guide for Computerized Exchange of Corrosion Data for Metals

    G146 Standard Practice for Evaluation of Disbonding of Bimetallic Stainless Alloy/Steel Plate for Use in High-Pressure, High-Temperature Refinery Hydrogen Service

    G157 Standard Guide for Evaluating Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for Chemical Process Industries

    G16 Standard Guide for Applying Statistics to Analysis of Corrosion Data

    G161 Standard Guide for Corrosion-Related Failure Analysis

    G170 Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory

    G184 Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using Rotating Cage

    G185 Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode

    G202 Standard Test Method for Using Atmospheric Pressure Rotating Cage

    G205 Standard Guide for Determining Corrosivity of Crude Oils

    G208 Standard Practice for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors Using Jet Impingement Apparatus

    G209 Standard Practice for Detecting mu-phase in Wrought Nickel-Rich, Chromium, Molybdenum-Bearing Alloys

    G210 Standard Practice for Operating the Severe Wastewater Analysis Testing Apparatus

    G28 Standard Test Methods for Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys

    G34 Standard Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test)

    G46 Standard Guide for Examination and Evaluation of Pitting Corrosion

    G48 : Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution

    G60 Standard Practice for Conducting Cyclic Humidity Exposures

    G66 Standard Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test)

    G67 Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test)

    G85 Standard Practice for Modified Salt Spray (Fog) Testing

    G87 Standard Practice for Conducting Moist SO2 Tests


    G01.04 - Atmospheric Corrosion

    G101 Standard Guide for Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels

    G116 Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion

    G140 Standard Test Method for Determining Atmospheric Chloride Deposition Rate by Wet Candle Method

    G33 Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens

    G50 Standard Practice for Conducting Atmospheric Corrosion Tests on Metals

    G84 Standard Practice for Measurement of Time-of-Wetness on Surfaces Exposed to Wetting Conditions as in Atmospheric Corrosion Testing

    G91 Standard Practice for Monitoring Atmospheric SO2 Deposition Rate for Atmospheric Corrosivity Evaluation

    G92 Standard Practice for Characterization of Atmospheric Test Sites


    F34.06 - Aerospace

    F2332 Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components

    F2953 Standard Specification for Phenolic Raw Materials for the Use in Bearing Cages

    F3131 Standard Specification for Epoxy / Cotton Raw Materials for the Use in Bearing Cages


    F34.04 - Automotive/Industrial Bearing

    F2162 Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type

    F2163 Standard Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring

    F2246 Standard Specification for Bearing, Roller, Needle: Thick Outer Ring With Rollers and Cage

    F2430 Standard Specification for Bearing, Roller, Needle: Assembly (Thick Outer Race)

    F2431 Standard Specification for Ring Bearing, Inner: For Needle Roller Bearing with Thick Outer Ring

    F2590 Standard Specification for Bearing, Roller, Thrust, Two Channeled Race Surface, Rigid or Flat Seat Type

    F2591 Standard Specification for Bearing, Roller, Tapered, Single Row of Rollers (Metric Series)


    F34.01 - Rolling Element

    F2094/F2094M Standard Specification for Silicon Nitride Bearing Balls

    F2215 Standard Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications

    F2443 Standard Specification for Roller, Bearing, Needle, Ferrous, Solid, Spherical End

    F2511 Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid

    F2730/F2730M Standard Specification for Silicon Nitride Cylindrical Bearing Rollers


    F24.24 - Design and Manufacture

    F1159 Standard Practice for Design of Amusement Rides and Devices that are Outside the Purview of Other F24 Design Standards

    F1193 Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices

    F2291 Standard Practice for Design of Amusement Rides and Devices

    F2375 Standard Practice for Design, Manufacture, Installation and Testing of Climbing Nets and Netting/Mesh used in Amusement Rides, Devices, Play Areas and Attractions


    F14.40 - Chain Link Fence and Wire Accessories

    A392 Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric

    A491 Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric

    A824 Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence

    F1043 Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework

    F1083 Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures

    F1183 Standard Specification for Aluminum Alloy Chain Link Fence Fabric

    F1184 Standard Specification for Industrial and Commercial Horizontal Slide Gates

    F1345 Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric

    F1379 Standard Terminology Relating to Barbed Tape

    F1553 Standard Guide for Specifying Chain Link Fence

    F1664 Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence

    F1665 Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence

    F1910 Standard Specification for Long Barbed Tape Obstacles

    F1911 Standard Practice for Installation of Barbed Tape

    F3000/F3000M Standard Specification for Polymer Privacy Insert Slats for Chain Link Fabric and Privacy Chain Link Fabric Manufactured Containing Pre-Installed Privacy Slats

    F552 Standard Terminology Relating to Chain Link Fencing

    F567 Standard Practice for Installation of Chain-Link Fence

    F626 Standard Specification for Fence Fittings

    F654 Standard Specification for Residential Chain Link Fence Gates

    F668 Standard Specification for Polyvinyl Chloride (PVC) and Other Organic Polymer-Coated Steel Chain-Link Fence Fabric

    F900 Standard Specification for Industrial and Commercial Swing Gates

    F934 Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials


    F07.08 - Transparent Enclosures and Materials

    F1164 Standard Test Method for Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress

    F1165 Standard Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts

    F1181 Standard Test Method for Measuring Binocular Disparity in Transparent Parts

    F1252 Standard Test Method for Measuring Optical Reflectivity of Transparent Materials

    F1316 Standard Test Method for Measuring the Transmissivity of Transparent Parts

    F1362 Standard Test Method for Shear Strength and Shear Modulus of Aerospace Glazing Interlayer Materials

    F1863 Standard Test Method for Measuring the Night Vision Goggle-Weighted Transmisivity of Transparent Parts

    F1864 Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings

    F2108 Standard Practice for Inspection of Transparent Parts by Prism

    F2156 Standard Test Method for Measuring Optical Distortion in Transparent Parts Using Grid Line Slope

    F2429 Standard Terminology Relating to Aerospace Transparent Materials and Enclosures

    F2469 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method

    F319 Standard Practice for Polarized Light Detection of Flaws in Aerospace Transparency Heating Elements

    F320 Standard Test Method for Hail Impact Resistance of Aerospace Transparent Enclosures

    F330 Standard Test Method for Bird Impact Testing of Aerospace Transparent Enclosures

    F428 Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures

    F520 Standard Test Method for Environmental Resistance of Aerospace Transparencies

    F521 Standard Test Methods for Bond Integrity of Transparent Laminates

    F548 Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics

    F733 Standard Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method

    F734 Standard Test Method for Shear Strength of Fusion Bonded Polycarbonate Aerospace Glazing Material

    F735 Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method

    F736 Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight

    F790 Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures

    F791 Standard Test Method for Stress Crazing of Transparent Plastics

    F801 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts

    F942 Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures


    F07.07 - Qualification Testing of Aircraft Cleaning Materials

    F1080 Standard Test Method for Determining the Consistency of Viscous Liquids Using a Consistometer

    F1104 Standard Test Method for Preparing Aircraft Cleaning Compounds, Liquid Type, Water Base, for Storage Stability Testing

    F1105 Standard Practice for Preparing Aircraft Cleaning Compounds, Liquid-Type, Temperature-Sensitive, or Solvent-Based, for Storage Stability Testing

    F1110 Standard Test Method for Sandwich Corrosion Test

    F1111 Standard Test Method for Corrosion of Low-Embrittling Cadmium Plate by Aircraft Maintenance Chemicals

    F2109 Standard Test Method to Determine Color Change and Staining Caused by Aircraft Maintenance Chemicals upon Aircraft Cabin Interior Hard Surfaces

    F2111 Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes

    F482 Standard Practice for Corrosion of Aircraft Metals by Total Immersion in Maintenance Chemicals

    F483 Standard Practice for Total Immersion Corrosion Test for Aircraft Maintenance Chemicals

    F484 Standard Test Method for Stress Crazing of Acrylic Plastics in Contact with Liquid or Semi-Liquid Compounds

    F485 Standard Practice for Effects of Cleaners on Unpainted Aircraft Surfaces

    F502 Standard Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces

    F862 Standard Practice for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids

    F945 Standard Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials


    F04.15 - Material Test Methods

    F1044 Standard Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings

    F1089 Standard Test Method for Corrosion of Surgical Instruments

    F1147 Standard Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings

    F1160 Standard Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings

    F1536 Standard Test Method for Determining Strength and Setting Time of Synthetic Water-Activated Polyurethane Fiberglass Orthopaedic Casting Tape

    F1634 Standard Practice for In-Vitro Environmental Conditioning of Polymer Matrix Composite Materials and Implant Devices

    F1635 Standard Test Method for in vitro Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants

    F1801 Standard Practice for Corrosion Fatigue Testing of Metallic Implant Materials

    F1854 Standard Test Method for Stereological Evaluation of Porous Coatings on Medical Implants

    F1875 Standard Practice for Fretting Corrosion Testing of Modular Implant Interfaces: Hip Femoral Head-Bore and Cone Taper Interface

    F1978 Standard Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser

    F2003 Standard Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene after Gamma Irradiation in Air

    F2004 Standard Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis

    F2052 Standard Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magnetic Resonance Environment

    F2102 Standard Guide for Evaluating the Extent of Oxidation in Polyethylene Fabricated Forms Intended for Surgical Implants

    F2118 Standard Test Method for Constant Amplitude of Force Controlled Fatigue Testing of Acrylic Bone Cement Materials

    F2119 Standard Test Method for Evaluation of MR Image Artifacts from Passive Implants

    F2129 Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices

    F2182 Standard Test Method for Measurement of Radio Frequency Induced Heating On or Near Passive Implants During Magnetic Resonance Imaging

    F2183 Standard Test Method for Small Punch Testing of Ultra-High Molecular Weight Polyethylene Used in Surgical Implants

    F2213 Standard Test Method for Measurement of Magnetically Induced Torque on Medical Devices in the Magnetic Resonance Environment

    F2214 Standard Test Method for In Situ Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE)

    F2255 Standard Test Method for Strength Properties of Tissue Adhesives in Lap-Shear by Tension Loading

    F2256 Standard Test Method for Strength Properties of Tissue Adhesives in T-Peel by Tension Loading

    F2258 Standard Test Method for Strength Properties of Tissue Adhesives in Tension

    F2381 Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy

    F2392 Standard Test Method for Burst Strength of Surgical Sealants

    F2458 Standard Test Method for Wound Closure Strength of Tissue Adhesives and Sealants

    F2459 Standard Test Method for Extracting Residue from Metallic Medical Components and Quantifying via Gravimetric Analysis

    F2503 Standard Practice for Marking Medical Devices and Other Items for Safety in the Magnetic Resonance Environment

    F2516 Standard Test Method for Tension Testing of Nickel-Titanium Superelastic Materials

    F2537 Standard Practice for Calibration of Linear Displacement Sensor Systems Used to Measure Micromotion

    F2625 Standard Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry

    F2754/F2754M Standard Test Method for Measurement of Camber, Cast, Helix and Direction of Helix of Coiled Wire

    F2778 Standard Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR)

    F2819 Standard Test Methods for Measurement of Straightness of Bar, Rod, Tubing and Wire to be used for Medical Devices

    F2847 Standard Practice for Reporting and Assessment of Residues on Single Use Implants

    F2977 Standard Test Method for Small Punch Testing of Polymeric Biomaterials Used in Surgical Implants

    F2995 Standard Guide for Shipping Possibly Infectious Materials, Tissues, and Fluids

    F3044 Test Method for Standard Test Method for Evaluating the Potential for Galvanic Corrosion for Medical Implants

    F561 Standard Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids

    F640 Standard Test Methods for Determining Radiopacity for Medical Use

    F732 Standard Test Method for Wear Testing of Polymeric Materials Used in Total Joint Prostheses

    F746 Standard Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials

    F897 Standard Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws


    F04.12 - Metallurgical Materials

    F1058 Standard Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire and Strip for Surgical Implant Applications (UNS R30003 and UNS R30008)

    F1091 Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy Surgical Fixation Wire (UNS R30605)

    F1108 Standard Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406)

    F1295 Standard Specification for Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700)

    F1314 Standard Specification for Wrought Nitrogen Strengthened 22 Chromium–13 Nickel–5 Manganese–2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910)

    F1350 Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Surgical Fixation Wire (UNS S31673)

    F136 Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401)

    F1377 Standard Specification for Cobalt-28Chromium-6Molybdenum Powder for Coating of Orthopedic Implants (UNS R30075)

    F138 Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673)

    F139 Standard Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673)

    F1472 Standard Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400)

    F1537 Standard Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539)

    F1580 Standard Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants

    F1586 Standard Specification for Wrought Nitrogen Strengthened 21Chromium-10Nickel-3Manganese-2.5Molybdenum Stainless Steel Alloy Bar for Surgical Implants (UNS S31675)

    F1713 Standard Specification for Wrought Titanium-13Niobium-13Zirconium Alloy for Surgical Implant Applications (UNS R58130)

    F1813 Standard Specification for Wrought Titanium–12 Molybdenum–6 Zirconium–2 Iron Alloy for Surgical Implant (UNS R58120)

    F2005 Standard Terminology for Nickel-Titanium Shape Memory Alloys

    F2063 Standard Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants

    F2066 Standard Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150)

    F2146 Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications (UNS R56320)

    F2181 Standard Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants

    F2229 Standard Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108)

    F2257 Standard Specification for Wrought Seamless or Welded and Drawn 18 Chromium-14Nickel-2.5Molybdenum Stainless Steel Small Diameter Tubing for Surgical Implants (UNS S31673)

    F2384 Standard Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications (UNS R60901)

    F2527 Standard Specification for Wrought Seamless and Welded and Drawn Cobalt Alloy Small Diameter Tubing for Surgical Implants (UNS R30003, UNS R30008, UNS R30035, UNS R30605, and UNS R31537)

    F2581 Standard Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225)

    F2633 Standard Specification for Wrought Seamless Nickel-Titanium Shape Memory Alloy Tube for Medical Devices and Surgical Implants

    F2885 Standard Specification for Metal Injection Molded Titanium-6Aluminum-4Vanadium Components for Surgical Implant Applications

    F2886 Standard Specification for Metal Injection Molded Cobalt-28Chromium-6Molybdenum Components for Surgical Implant Applications

    F2895 Standard Practice for Digital Radiography of Cast Metallic Implants

    F2989 Standard Specification for Metal Injection Molded Unalloyed Titanium Components for Surgical Implant Applications

    F3046 Standard Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy for Surgical Implant Applications (UNS R56320)

    F560 Standard Specification for Unalloyed Tantalum for Surgical Implant Applications (UNS R05200, UNS R05400)

    F562 Standard Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035)

    F601 Standard Practice for Fluorescent Penetrant Inspection of Metallic Surgical Implants

    F620 Standard Specification for Titanium Alloy Forgings for Surgical Implants in the Alpha Plus Beta Condition

    F621 Standard Specification for Stainless Steel Forgings for Surgical Implants

    F629 Standard Practice for Radiography of Cast Metallic Surgical Implants

    F67 Standard Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700)

    F688 Standard Specification for Wrought Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Plate, Sheet, and Foil for Surgical Implants (UNS R30035)

    F75 Standard Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075)

    F799 Standard Specification for Cobalt-28Chromium-6Molybdenum Alloy Forgings for Surgical Implants (UNS R31537, R31538, R31539)

    F86 Standard Practice for Surface Preparation and Marking of Metallic Surgical Implants

    F899 Standard Specification for Wrought Stainless Steels for Surgical Instruments

    F90 Standard Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605)

    F961 Standard Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035)


    F03.20 - Mechanical Test Methods

    F1087 Standard Test Method for Linear Dimensional Stability of a Gasket Material to Moisture

    F1276 Standard Test Method for Creep Relaxation of Laminated Composite Gasket Materials

    F1315 Standard Test Method for Density of a Sheet Gasket Material

    F145 Standard Practice for Evaluating Flat-Faced Gasketed Joint Assemblies

    F147 Standard Test Method for Flexibility of Non-Metallic Gasket Materials

    F152 Standard Test Methods for Tension Testing of Nonmetallic Gasket Materials

    F1574 Standard Test Method for Compressive Strength of Gaskets at Elevated Temperatures

    F36 Standard Test Method for Compressibility and Recovery of Gasket Materials

    F38 Standard Test Methods for Creep Relaxation of a Gasket Material

    F434 Standard Test Method for Blow-Out Testing of Preformed Gaskets

    F806 Standard Test Method for Compressibility and Recovery of Laminated Composite Gasket Materials


    E42.03 - Auger Electron Spectroscopy and X-Ray Photoelectron Spectroscopy

    E1016 Standard Guide for Literature Describing Properties of Electrostatic Electron Spectrometers

    E1078 Standard Guide for Specimen Preparation and Mounting in Surface Analysis

    E1127 Standard Guide for Depth Profiling in Auger Electron Spectroscopy

    E1217 Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers

    E1523 Standard Guide to Charge Control and Charge Referencing Techniques in X-Ray Photoelectron Spectroscopy

    E1829 Standard Guide for Handling Specimens Prior to Surface Analysis

    E2108 Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer

    E2735 Standard Guide for Selection of Calibrations Needed for X-ray Photoelectron Spectroscopy (XPS) Experiments

    E827 Standard Practice for Identifying Elements by the Peaks in Auger Electron Spectroscopy

    E983 Standard Guide for Minimizing Unwanted Electron Beam Effects in Auger Electron Spectroscopy

    E984 Standard Guide for Identifying Chemical Effects and Matrix Effects in Auger Electron Spectroscopy

    E995 Standard Guide for Background Subtraction Techniques in Auger Electron Spectroscopy and X-Ray Photoelectron Spectroscopy

    E996 Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy


    E37.01 - Calorimetry and Mass Loss

    E1131 Standard Test Method for Compositional Analysis by Thermogravimetry

    E1269 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry

    E1356 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry

    E1582 Standard Practice for Calibration of Temperature Scale for Thermogravimetry

    E1641 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method

    E1719 Standard Test Method for Vapor Pressure of Liquids by Ebulliometry

    E1782 Standard Test Method for Determining Vapor Pressure by Thermal Analysis

    E1858 Standard Test Methods for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry

    E1868 Standard Test Methods for Loss-On-Drying by Thermogravimetry

    E2008 Standard Test Methods for Volatility Rate by Thermogravimetry

    E2009 Standard Test Methods for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry

    E2040 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers

    E2041 Standard Test Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method

    E2069 Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters

    E2070 Standard Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods

    E2160 Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry

    E2403 Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry

    E2550 Standard Test Method for Thermal Stability by Thermogravimetry

    E2602 Standard Test Method for the Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry

    E2716 Standard Test Method for Determining Specific Heat Capacity by Sinusoidal Modulated Temperature Differential Scanning Calorimetry

    E2890 Standard Test Method for Kinetic Parameters for Thermally Unstable Materials by Differential Scanning Calorimetry Using the Kissinger Method

    E2958 Standard Test Methods for Kinetic Parameters by Factor Jump/Modulated Thermogravimetry

    E793 Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry

    E794 Standard Test Method for Melting And Crystallization Temperatures By Thermal Analysis

    E928 Standard Test Method for Purity by Differential Scanning Calorimetry

    E967 Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers

    E968 Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters


    E28.04 - Uniaxial Testing

    E111 Standard Test Method for Young's Modulus, Tangent Modulus, and Chord Modulus

    E132 Standard Test Method for Poisson's Ratio at Room Temperature

    E139 Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials

    E143 Standard Test Method for Shear Modulus at Room Temperature

    E1450 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium

    E1875 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance

    E1876 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration

    E209 Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates

    E21 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials

    E238 Standard Test Method for Pin-Type Bearing Test of Metallic Materials

    E292 Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials

    E328 Standard Test Methods for Stress Relaxation Tests for Materials and Structures

    E345 Standard Test Methods of Tension Testing of Metallic Foil

    E633 Standard Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800°F (1000°C) in Air

    E8/E8M Standard Test Methods for Tension Testing of Metallic Materials

    E9 Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature


    E28.02 - Ductility and Formability

    E190 Standard Test Method for Guided Bend Test for Ductility of Welds

    E2218 Standard Test Method for Determining Forming Limit Curves

    E2448 Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials

    E2492 Standard Test Method for Evaluating Springback of Sheet Metal Using the Demeri Split Ring Test

    E2712 Standard Test Methods for Forming Superplastic Metallic Sheet

    E290 Standard Test Methods for Bend Testing of Material for Ductility

    E517 Standard Test Method for Plastic Strain Ratio r for Sheet Metal

    E643 Standard Test Method for Ball Punch Deformation of Metallic Sheet Material

    E646 Standard Test Method for Tensile Strain-Hardening Exponents (n -Values) of Metallic Sheet Materials

    E855 Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading


    E28.01 - Calibration of Mechanical Testing Machines and Apparatus

    E1012 Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application

    E1237 Standard Guide for Installing Bonded Resistance Strain Gages

    E1319 Standard Guide for High-Temperature Static Strain Measurement

    E1561 Standard Practice for Analysis of Strain Gage Rosette Data

    E1949 Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages

    E2309/E2309M Standard Practices for Verification of Displacement Measuring Systems and Devices Used in Material Testing Machines

    E2428 Standard Practice for Calibration of Torque-Measuring Instruments for Verifying the Torque Indication of Torque Testing Machines

    E251 Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages

    E2624 Standard Practice for Torque Calibration of Testing Machines and Devices

    E2658 Standard Practices for Verification of Speed for Material Testing Machines

    E4 Standard Practices for Force Verification of Testing Machines

    E74 Standard Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines

    E83 Standard Practice for Verification and Classification of Extensometer Systems


    E08.07 - Fracture Mechanics

    E1221 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels

    E1820 Standard Test Method for Measurement of Fracture Toughness

    E1921 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range

    E2472 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions

    E2818 Standard Practice for Determination of Quasistatic Fracture Toughness of Welds

    E2899 Standard Test Method for Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending

    E399 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness KIc of Metallic Materials

    E561 Standard Test Method for K-R Curve Determination

    E740/E740M Standard Practice for Fracture Testing with Surface-Crack Tension Specimens


    E08.06 - Crack Growth Behavior

    E1457 Standard Test Method for Measurement of Creep Crack Growth Times and Rates in Metals

    E1681 Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials

    E2760 Standard Test Method for Creep-Fatigue Crack Growth Testing

    E647 Standard Test Method for Measurement of Fatigue Crack Growth Rates


    E08.05 - Cyclic Deformation and Fatigue Crack Formation

    E1922 Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials

    E2207 Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens

    E2244 Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer

    E2245 Standard Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer

    E2246 Standard Test Method for Strain Gradient Measurements of Thin, Reflecting Films Using an Optical Interferometer

    E2368 Standard Practice for Strain Controlled Thermomechanical Fatigue Testing

    E2714 Standard Test Method for Creep-Fatigue Testing

    E2789 Standard Guide for Fretting Fatigue Testing

    E2948 Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire

    E466 Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials

    E468 Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials

    E606/E606M Standard Test Method for Strain-Controlled Fatigue Testing


    E07.11 - Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)

    E1475 Standard Guide for Data Fields for Computerized Transfer of Digital Radiological Examination Data

    E2339 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)

    E2663 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Ultrasonic Test Methods

    E2699 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Digital Radiographic (DR) Test Methods

    E2738 Standard Practice for Digital Imaging and Communication Nondestructive Evaluation (DICONDE) for Computed Radiography (CR) Test Methods

    E2767 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for X-ray Computed Tomography (CT) Test Methods

    E2934 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Eddy Current (EC) Test Methods


    E07.10 - Specialized NDT Methods

    E1213 Standard Practice for Minimum Resolvable Temperature Difference for Thermal Imaging Systems

    E1311 Standard Practice for Minimum Detectable Temperature Difference for Thermal Imaging Systems

    E1476 Standard Guide for Metals Identification, Grade Verification, and Sorting

    E1543 Standard Practice for Noise Equivalent Temperature Difference of Thermal Imaging Systems

    E1862 Standard Practice for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers

    E1897 Standard Practice for Measuring and Compensating for Transmittance of an Attenuating Medium Using Infrared Imaging Radiometers

    E1933 Standard Practice for Measuring and Compensating for Emissivity Using Infrared Imaging Radiometers

    E1934 Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography

    E2533 Standard Guide for Nondestructive Testing of Polymer Matrix Composites Used in Aerospace Applications

    E2581 Standard Practice for Shearography of Polymer Matrix Composites and Sandwich Core Materials in Aerospace Applications

    E2582 Standard Practice for Infrared Flash Thermography of Composite Panels and Repair Patches Used in Aerospace Applications

    E2775 Standard Practice for Guided Wave Testing of Above Ground Steel Pipework Using Piezoelectric Effect Transduction

    E2862 Standard Practice for Probability of Detection Analysis for Hit/Miss Data

    E2906/E2906M Standard Practice for Acoustic Pulse Reflectometry Examination of Tube Bundles

    E2929 Standard Practice for Guided Wave Testing of Above Ground Steel Piping with Magnetostrictive Transduction

    E2982 Standard Guide for Nondestructive Testing of Thin-Walled Metallic Liners in Filament-Wound Pressure Vessels Used in Aerospace Applications

    E977 Standard Practice for Thermoelectric Sorting of Electrically Conductive Materials


    E07.08 - Leak Testing Method

    E1002 Standard Practice for Leaks Using Ultrasonics

    E1003 Standard Practice for Hydrostatic Leak Testing

    E1066/E1066M Standard Practice for Ammonia Colorimetric LeakTesting

    E1603/E1603M Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode

    E2024/E2024M Standard Practice for Atmospheric Leaks Using a Thermal Conductivity Leak Detector

    E2930 Standard Practice for Pressure Decay Leak Test Method

    E432 Standard Guide for Selection of a Leak Testing Method

    E493/E493M Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode

    E498/E498M Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode

    E499/E499M Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode

    E515 Standard Practice for Leaks Using Bubble Emission Techniques

    E908 Standard Practice for Calibrating Gaseous Reference Leaks


    E07.07 - Electromagnetic Method

    E1004 Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy-Current) Method

    E1033 Standard Practice for Electromagnetic (Eddy Current) Examination of Type F-Continuously Welded (CW) Ferromagnetic Pipe and Tubing Above the Curie Temperature

    E1312 Standard Practice for Electromagnetic (Eddy-Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature

    E1571 Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope

    E1606 Standard Practice for Electromagnetic (Eddy-Current) Examination of Copper Redraw Rod for Electrical Purposes

    E1629 Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes

    E2096/E2096M Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing

    E215 Standard Practice for Standardizing Equipment for Electromagnetic Testing of Seamless Aluminum-Alloy Tube

    E2261/E2261M Standard Practice for Examination of Welds Using the Alternating Current Field Measurement Technique

    E2337/E2337M Standard Guide for Mutual Inductance Bridge Applications for Wall Thickness Determinations in Boiler Tubing

    E2338 Standard Practice for Characterization of Coatings Using Conformable Eddy-Current Sensors without Coating Reference Standards

    E243 Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Copper-Alloy Tubes

    E2884 Standard Guide for Eddy Current Testing of Electrically Conducting Materials Using Conformable Sensor Arrays

    E2905/E2905M Standard Practice for Examination of Mill and Kiln Girth Gear Teeth—Electromagnetic Methods

    E2928/E2928M Standard Practice for Examination of Drillstring Threads Using the Alternating Current Field Measurement Technique

    E309 Standard Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation

    E376 Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy-Current (Electromagnetic) Testing Methods

    E426 Standard Practice for Electromagnetic (Eddy-Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys

    E566 Standard Practice for Electromagnetic (Eddy Current) Sorting of Ferrous Metals

    E570 Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products

    E571 Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products

    E690 Standard Practice for In Situ Electromagnetic (Eddy-Current) Examination of Nonmagnetic Heat Exchanger Tubes

    E703 Standard Practice for Electromagnetic (Eddy Current) Sorting of Nonferrous Metals


    E07.06 - Ultrasonic Method

    E1001 Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves

    E1065/E1065M Standard Guide for Evaluating Characteristics of Ultrasonic Search Units

    E114 Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing

    E1158 Standard Guide for Material Selection and Fabrication of Reference Blocks for the Pulsed Longitudinal Wave Ultrasonic Testing of Metal and Metal Alloy Production Material

    E127 Standard Practice for Fabricating and Checking Aluminum Alloy Ultrasonic Standard Reference Blocks

    E1324 Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Testing Instruments

    E164 Standard Practice for Contact Ultrasonic Testing of Weldments

    E1774 Standard Guide for Electromagnetic Acoustic Transducers (EMATs)

    E1816 Standard Practice for Ultrasonic Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques

    E1901 Standard Guide for Detection and Evaluation of Discontinuities by Contact Pulse-Echo Straight-Beam Ultrasonic Methods

    E1961 Standard Practice for Mechanized Ultrasonic Testing of Girth Welds Using Zonal Discrimination with Focused Search Units

    E1962 Standard Practice for Ultrasonic Surface Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques

    E2001 Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-metallic Parts

    E213 Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing

    E2192 Standard Guide for Planar Flaw Height Sizing by Ultrasonics

    E2223 Standard Practice for Examination of Seamless, Gas-Filled, Steel Pressure Vessels Using Angle Beam Ultrasonics

    E2373/E2373M Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique

    E2375 Standard Practice for Ultrasonic Testing of Wrought Products

    E2479 Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (LCR) Waves

    E2491 Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems

    E2534 Standard Practice for Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts

    E2580 Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications

    E2700 Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays

    E273 Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing

    E2904 Standard Practice for Characterization and Verification of Phased Array Probes

    E2985/E2985M Standard Practice for Determination of Metal Purity Based on Elastic Constant Measurements Derived from Resonant Ultrasound Spectroscopy

    E317 Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments

    E428 Standard Practice for Fabrication and Control of Metal, Other than Aluminum, Reference Blocks Used in Ultrasonic Testing

    E494 Standard Practice for Measuring Ultrasonic Velocity in Materials

    E587 Standard Practice for Ultrasonic Angle-Beam Contact Testing

    E664/E664M Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method

    E797/E797M Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method


    E07.04 - Acoustic Emission Method

    E1067/E1067M Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels

    E1106 Standard Test Method for Primary Calibration of Acoustic Emission Sensors

    E1118/E1118M Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)

    E1139/E1139M Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries

    E1211/E1211M Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors

    E1419 Standard Practice for Examination of Seamless, Gas-Filled, Pressure Vessels Using Acoustic Emission

    E1495/E1495M Standard Guide for Acousto-Ultrasonic Assessment of Composites, Laminates, and Bonded Joints

    E1736 Standard Practice for Acousto-Ultrasonic Assessment of Filament-Wound Pressure Vessels

    E1781/E1781M Standard Practice for Secondary Calibration of Acoustic Emission Sensors

    E1888/E1888M Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores

    E1930/E1930M Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission

    E1932 Standard Guide for Acoustic Emission Examination of Small Parts

    E2075/E2075M Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod

    E2076/E2076M Standard Practice for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission

    E2191/E2191M Standard Practice for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission

    E2374 Standard Guide for Acoustic Emission System Performance Verification

    E2478 Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission

    E2598/E2598M Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper Dryers

    E2661/E2661M Standard Practice for Acoustic Emission Examination of Plate-like and Flat Panel Composite Structures Used in Aerospace Applications

    E2863 Standard Practice for Acoustic Emission Examination of Welded Steel Sphere Pressure Vessels Using Thermal Pressurization

    E2907/E2907M Standard Practice for Examination of Paper Machine Rolls Using Acoustic Emission from Crack Face Rubbing

    E2983 Standard Guide for Application of Acoustic Emission for Structural Health Monitoring

    E2984/E2984M Standard Practice for Acoustic Emission Examination of High Pressure, Low Carbon, Forged Piping using Controlled Hydrostatic Pressurization

    E569/E569M Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation

    E650/E650M Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors

    E749/E749M Standard Practice for Acoustic Emission Monitoring During Continuous Welding

    E750 Standard Practice for Characterizing Acoustic Emission Instrumentation

    E751/E751M Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding

    E976 Standard Guide for Determining the Reproducibility of Acoustic Emission Sensor Response


    E07.03 - Liquid Penetrant and Magnetic Particle Methods

    E1135 Standard Test Method for Comparing the Brightness of Fluorescent Penetrants

    E1208 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Lipophilic Post-Emulsification Process

    E1209 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process

    E1210 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Hydrophilic Post-Emulsification Process

    E1219 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process

    E1220 Standard Practice for Visible Penetrant Testing Using Solvent-Removable Process

    E125 Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings

    E1417/E1417M Standard Practice for Liquid Penetrant Testing

    E1418 Standard Practice for Visible Penetrant Testing Using the Water-Washable Process

    E1444/E1444M Standard Practice for Magnetic Particle Testing

    E165/E165M Standard Practice for Liquid Penetrant Examination for General Industry

    E2297 Standard Guide for Use of UV-A and Visible Light Sources and Meters used in the Liquid Penetrant and Magnetic Particle Methods

    E433 Standard Reference Photographs for Liquid Penetrant Inspection

    E709 Standard Guide for Magnetic Particle Testing


    E07.02 - Reference Radiological Images

    E1320 Standard Reference Radiographs for Titanium Castings

    E155 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings

    E1648 Standard Reference Radiographs for Examination of Aluminum Fusion Welds

    E186 Standard Reference Radiographs for Heavy-Walled (2 to 4½-in. (50.8 to 114-mm)) Steel Castings

    E192 Standard Reference Radiographs of Investment Steel Castings for Aerospace Applications

    E1936 Standard Reference Radiograph for Evaluating the Performance of Radiographic Digitization Systems

    E1955 Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM Reference Radiographs

    E242 Standard Reference Radiographs for Appearances of Radiographic Images as Certain Parameters Are Changed

    E2422 Standard Digital Reference Images for Inspection of Aluminum Castings

    E2660 Standard Digital Reference Images for Investment Steel Castings for Aerospace Applications

    E2669 Standard Digital Reference Images for Titanium Castings

    E272 Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings

    E280 Standard Reference Radiographs for Heavy-Walled (4½ to 12-in. (114 to 305-mm)) Steel Castings

    E2868 Standard Digital Reference Images for Steel Castings up to 2 in. (50.8 mm) in Thickness

    E2869 Standard Digital Reference Images for Magnesium Castings

    E2973 Standard Digital Reference Images for Inspection of Aluminum and Magnesium Die Castings

    E310 Standard Reference Radiographs for Tin Bronze Castings

    E390 Standard Reference Radiographs for Steel Fusion Welds

    E431 Standard Guide to Interpretation of Radiographs of Semiconductors and Related Devices

    E446 Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness

    E505 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Die Castings

    E592 Standard Guide to Obtainable ASTM Equivalent Penetrameter Sensitivity for Radiography of Steel Plates 1/4 to 2 in. (6 to 51 mm) Thick with X Rays and 1 to 6 in. (25 to 152 mm) Thick with Cobalt-60

    E689 Standard Reference Radiographs for Ductile Iron Castings

    E802 Standard Reference Radiographs for Gray Iron Castings Up to 4 1/2 in. (114 mm) in Thickness


    E07.01 - Radiology (X and Gamma) Method

    E1000 Standard Guide for Radioscopy

    E1025 Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology

    E1030 Standard Test Method for Radiographic Examination of Metallic Castings

    E1032 Standard Test Method for Radiographic Examination of Weldments

    E1079 Standard Practice for Calibration of Transmission Densitometers

    E1114 Standard Test Method for Determining the Size of Iridium-192 Industrial Radiographic Sources

    E1161 Standard Practice for Radiologic Examination of Semiconductors and Electronic Components

    E1165 Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging

    E1254 Standard Guide for Storage of Radiographs and Unexposed Industrial Radiographic Films

    E1255 Standard Practice for Radioscopy

    E1390 Standard Specification for Illuminators Used for Viewing Industrial Radiographs

    E1411 Standard Practice for Qualification of Radioscopic Systems

    E1416 Standard Test Method for Radioscopic Examination of Weldments

    E1441 Standard Guide for Computed Tomography (CT) Imaging

    E1453 Standard Guide for Storage of Magnetic Tape Media that Contains Analog or Digital Radioscopic Data

    E1570 Standard Practice for Computed Tomographic (CT) Examination

    E1647 Standard Practice for Determining Contrast Sensitivity in Radioscopy

    E1672 Standard Guide for Computed Tomography (CT) System Selection

    E1695 Standard Test Method for Measurement of Computed Tomography (CT) System Performance

    E1734 Standard Practice for Radioscopic Examination of Castings

    E1735 Standard Test Method for Determining Relative Image Quality of Industrial Radiographic Film Exposed to X-Radiation from 4 to 25 MeV

    E1742/E1742M Standard Practice for Radiographic Examination

    E1814 Standard Practice for Computed Tomographic (CT) Examination of Castings

    E1815 Standard Test Method for Classification of Film Systems for Industrial Radiography

    E1817 Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs)

    E1931 Standard Guide for X-Ray Compton Scatter Tomography

    E1935 Standard Test Method for Calibrating and Measuring CT Density

    E2002 Standard Practice for Determining Total Image Unsharpness in Radiology

    E2007 Standard Guide for Computed Radiography

    E2033 Standard Practice for Computed Radiology (Photostimulable Luminescence Method)

    E2104 Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials and Components

    E2445/E2445M Standard Practice for Performance Evaluation and Long-Term Stability of Computed Radiography Systems

    E2446 Standard Practice for Classification of Computed Radiology Systems

    E2597/E2597M Standard Practice for Manufacturing Characterization of Digital Detector Arrays

    E2662 Standard Practice for Radiologic Examination of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications

    E2698 Standard Practice for Radiological Examination Using Digital Detector Arrays

    E2736 Standard Guide for Digital Detector Array Radiology

    E2737 Standard Practice for Digital Detector Array Performance Evaluation and Long-Term Stability

    E2903 Standard Test Method for Measurement of the Effective Focal Spot Size of Mini and Micro Focus X-ray Tubes

    E746 Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems

    E747 Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology

    E801 Standard Practice for Controlling Quality of Radiological Examination of Electronic Devices

    E94 Standard Guide for Radiographic Examination

    E999 Standard Guide for Controlling the Quality of Industrial Radiographic Film Processing


    E04.14 - Quantitative Metallography

    E1077 Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens

    E1245 Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis

    E1268 Standard Practice for Assessing the Degree of Banding or Orientation of Microstructures

    E1382 Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis

    E2109 Standard Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings

    E2567 Standard Test Method for Determining Nodularity And Nodule Count In Ductile Iron Using Image Analysis

    E562 Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count


    E04.11 - X-Ray and Electron Metallography

    E1508 Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy

    E2142 Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope

    E2627 Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials

    E766 Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope

    E81 Standard Test Method for Preparing Quantitative Pole Figures

    E82/E82M Standard Test Method for Determining the Orientation of a Metal Crystal

    E963 Standard Practice for Electrolytic Extraction of Phases from Ni and Ni-Fe Base Superalloys Using a Hydrochloric-Methanol Electrolyte

    E975 Standard Practice for X-Ray Determination of Retained Austenite in Steel with Near Random Crystallographic Orientation

    E986 Standard Practice for Scanning Electron Microscope Beam Size Characterization


    E04.01 - Specimen Preparation

    E1180 Standard Practice for Preparing Sulfur Prints for Macrostructural Evaluation

    E1351 Standard Practice for Production and Evaluation of Field Metallographic Replicas

    E1558 Standard Guide for Electrolytic Polishing of Metallographic Specimens

    E1920 Standard Guide for Metallographic Preparation of Thermal Sprayed Coatings

    E2015 Standard Guide for Preparation of Plastics and Polymeric Specimens for Microstructural Examination

    E3 Standard Guide for Preparation of Metallographic Specimens

    E340 Standard Test Method for Macroetching Metals and Alloys

    E381 Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings

    E407 Standard Practice for Microetching Metals and Alloys

    E768 Standard Guide for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel


    E01.22 - Laboratory Quality

    E1329 Standard Practice for Verification and Use of Control Charts in Spectrochemical Analysis

    E1601 Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method

    E1914 Standard Practice for Use of Terms Relating to the Development and Evaluation of Methods for Chemical Analysis

    E1950 Standard Practice for Reporting Results from Methods of Chemical Analysis

    E2027 Standard Practice for Conducting Proficiency Tests in the Chemical Analysis of Metals, Ores, and Related Materials

    E2093 Standard Guide for Optimizing, Controlling and Assessing Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization

    E2857 Standard Guide for Validating Analytical Methods

    E2972 Standard Guide for Production, Testing, and Value Assignment of In-House Reference Materials for Metals, Ores, and Other Related Materials

    E826 Standard Practice for Testing Homogeneity of a Metal Lot or Batch in Solid Form by Spark Atomic Emission Spectrometry

    E882 Standard Guide for Accountability and Quality Control in the Chemical Analysis Laboratory


    E01.20 - Fundamental Practices

    E1097 Standard Guide for Determination of Various Elements by Direct Current Plasma Atomic Emission Spectrometry

    E1172 Standard Practice for Describing and Specifying a Wavelength-Dispersive X-Ray Spectrometer

    E1184 Standard Practice for Determination of Elements by Graphite Furnace Atomic Absorption Spectrometry

    E1257 Standard Guide for Evaluating Grinding Materials Used for Surface Preparation in Spectrochemical Analysis

    E1282 Standard Guide for Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis Methods for Metals, Ores, and Related Materials

    E1306 Standard Practice for Preparation of Metal and Alloy Samples by Electric Arc Remelting for the Determination of Chemical Composition

    E1361 Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis

    E1479 Standard Practice for Describing and Specifying Inductively-Coupled Plasma Atomic Emission Spectrometers

    E1621 Standard Guide for Elemental Analysis by Wavelength Dispersive X-Ray Fluorescence Spectrometry

    E1770 Standard Practice for Optimization of Electrothermal Atomic Absorption Spectrometric Equipment

    E1832 Standard Practice for Describing and Specifying a Direct Current Plasma Atomic Emission Spectrometer

    E1916 Standard Guide for Identification of Mixed Lots of Metals

    E305 Standard Practice for Establishing and Controlling Atomic Emission Spectrochemical Analytical Curves

    E406 Standard Practice for Using Controlled Atmospheres in Spectrochemical Analysis

    E50 Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials

    E520 Standard Practice for Describing Photomultiplier Detectors in Emission and Absorption Spectrometry

    E60 Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry


    E01.08 - Ni and Co and High Temperature Alloys

    E1473 Standard Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys

    E1587 Standard Test Methods for Chemical Analysis of Refined Nickel

    E1834 Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry

    E1835 Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry

    E1917 Standard Test Method for Determination of Phosphorus in Nickel, Ferronickel, and Nickel Alloys by Phosphovanadomolybdate Spectrophotometry

    E1938 Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Spectrophotometry

    E2465 Standard Test Method for Analysis of Ni-Base Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry

    E2594 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Method)

    E2823 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-Based Method)


    E01.06 - Ti, Zr, W, Mo, Ta, Nb, Hf, Re

    E1409 Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion

    E1447 Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity/Infrared Detection Method

    E1552 Standard Test Method for Determining Hafnium in Zirconium and Zirconium Alloys By Direct Current Plasma—Atomic Emission Spectrometry

    E1569 Standard Test Method for Determination of Oxygen in Tantalum Powder by Inert Gas Fusion Technique

    E1941 Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis

    E2371 Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)

    E2626 Standard Guide for Spectrometric Analysis of Reactive and Refractory Metals

    E539 Standard Test Method for Analysis of Titanium Alloys by X-Ray Fluorescence Spectrometry


    E01.05 - Cu, Pb, Zn, Cd, Sn, Be, Precious Metals, their Alloys, and Related Metals

    E1277 Standard Test Method for Analysis of Zinc-5 % Aluminum-Mischmetal Alloys by ICP Emission Spectrometry

    E1335 Standard Test Methods for Determination of Gold in Bullion by Fire Assay Cupellation Analysis

    E1446 Standard Test Method for Chemical Analysis of Refined Gold by Direct Current Plasma Atomic Emission Spectrometry

    E1659 Standard Test Methods for Coating Mass and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet

    E1771 Standard Test Method for Determination of Copper in Anode and Blister Copper

    E1833 Standard Practice for Sampling of Blister Copper in Cast Form for Determination of Chemical Composition

    E255 Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition

    E2575 Standard Test Method for Determination of Oxygen in Copper and Copper Alloys

    E2824 Standard Test Method for Determination of Beryllium in Copper-Beryllium Alloys by Phosphate Gravimetric Method

    E37 Standard Test Methods for Chemical Analysis of Pig Lead

    E396 Standard Test Methods for Chemical Analysis of Cadmium

    E439 Standard Test Methods for Chemical Analysis of Beryllium

    E478 Standard Test Methods for Chemical Analysis of Copper Alloys

    E53 Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry

    E536 Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys

    E55 Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition

    E581 Standard Test Methods for Chemical Analysis of Manganese-Copper Alloys

    E634 Standard Practice for Sampling of Zinc and Zinc Alloys by Spark Atomic Emission Spectrometry

    E88 Standard Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition


    E01.04 - Aluminum and Magnesium

    E1251 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry

    E2792 Standard Test Method for Determination of Hydrogen in Aluminum and Aluminum Alloys by Inert Gas Fusion

    E34 Standard Test Methods for Chemical Analysis of Aluminum and Aluminum-Base Alloys

    E716 Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spectrochemical Analysis


    E01.02 - Ores, Concentrates, and Related Metallurgical Materials

    E1070 Standard Test Method for Determination of Phosphorus in Iron Ores by Phospho-Molybdenum-Blue Spectrophotometry

    E1568 Standard Test Method for Determination of Gold in Activated Carbon by Fire Assay Gravimetry

    E1600 Standard Test Methods for Determination of Gold in Cyanide Solutions

    E1805 Standard Test Method for Determination of Gold in Copper Concentrates by Fire Assay Gravimetry

    E1898 Standard Test Method for Determination of Silver in Copper Concentrates by Flame Atomic Absorption Spectrometry

    E1915 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics

    E2050 Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion

    E2242 Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure

    E2293 Standard Practice for Drying of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials for the Determination of Mercury

    E2294 Standard Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates, and Related Materials by Fire Assay Gravimetry

    E2295 Standard Practice for Fire Assay Silver Corrections in Analysis of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Silver Determination in Slags and Cupels

    E2296 Standard Practice for Silver Corrections in Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Fire Assay Slag Recycling and Cupel Proof Gravimetry

    E246 Standard Test Methods for Determination of Iron in Iron Ores and Related Materials by Dichromate Titrimetry

    E247 Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry

    E248 Standard Test Method for Determination of Manganese in Manganese Ores by Pyrophosphate Complexed Permanganate Potentiometric Titrimetry

    E276 Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Finer for Metal-Bearing Ores and Related Materials

    E278 Standard Test Method for Determination of Phosphorus in Iron Ores by Phosphomolybdate Coprecipitation and Nitric Acid Titrimetry

    E279 Standard Test Method for Determination of Abrasion Resistance of Iron Ore Pellets and Sinter by the Tumbler Test

    E2941 Standard Practices for Extraction of Elements from Ores and Related Metallurgical Materials by Acid Digestion

    E314 Standard Test Methods for Determination of Manganese in Iron Ores by Pyrophosphate (Potentiometric) and Periodate (Photometric) Techniques

    E316 Standard Test Method for Determination of Iron in Manganese Ores by Hydrogen Sulfide Reduction-Dichromate Titrimetry

    E342 Standard Test Method for Determination of Chromium Oxide in Chrome Ores by Permanganate Titrimetry

    E382 Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets

    E389 Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Coarser for Metal-Bearing Ores and Related Materials

    E463 Standard Test Method for Determination of Silica in Fluorspar by Silico-Molybdate Visible Spectrophotometry

    E465 Standard Test Methods for Determination of Manganese (IV) in Manganese Ores by Redox Titrimetry

    E507 Standard Test Method for Determination of Aluminum in Iron Ores by Flame Atomic Absorption Spectrometry

    E508 Standard Test Method for Determination of Calcium and Magnesium in Iron Ores by Flame Atomic Absorption Spectrometry

    E738 Standard Test Method for Determination of Aluminum in Iron Ores and Related Materials by EDTA Complexometric Titrimetry

    E815 Standard Test Method for Determination of Calcium Fluoride in Fluorspar by Complexometric Titrimetry

    E841 Standard Test Method for Determination of Copper in Iron Ores and Related Materials by Flame Atomic Absorption Spectrometry

    E877 Standard Practice for Sampling and Sample Preparation of Iron Ores and Related Materials for Determination of Chemical Composition and Physical Properties

    E878 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrophotometry

    E945 Standard Test Method for Determination of Zinc in Zinc Ores and Concentrates by EDTA Complexometric Titrimetry


    E01.01 - Iron, Steel, and Ferroalloys

    E1010 Standard Practice for Preparation of Disk Specimens of Steel and Iron for Spectrochemical Analysis by Remelting

    E1019 Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques

    E1085 Standard Test Method for Analysis of Low-Alloy Steels by X-Ray Fluorescence Spectrometry

    E1086 Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry

    E1806 Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition

    E1852 Standard Test Method for Determination of Low Levels of Antimony in Carbon and Low-Alloy Steel by Graphite Furnace Atomic Absorption Spectrometry

    E1999 Standard Test Method for Analysis of Cast Iron by Spark Atomic Emission Spectrometry

    E2209 Standard Test Method for Analysis of High Manganese Steel by Spark Atomic Emission Spectrometry

    E322 Standard Test Method for Analysis of Low-Alloy Steels and Cast Irons by Wavelength Dispersive X-Ray Fluorescence Spectrometry

    E350 Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron

    E351 Standard Test Methods for Chemical Analysis of Cast Iron—All Types

    E352 Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels

    E353 Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys

    E354 Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys

    E363 Standard Test Methods for Chemical Analysis of Chromium and Ferrochromium

    E367 Standard Test Methods for Chemical Analysis of Ferroniobium

    E372 Standard Test Method for Determination of Calcium and Magnesium in Magnesium Ferrosilicon by EDTA Titration

    E415 Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry

    E572 Standard Test Method for Analysis of Stainless and Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry


    D30.10 - Composites for Civil Structures

    D7205/D7205M Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars

    D7290 Standard Practice for Evaluating Material Property Characteristic Values for Polymeric Composites for Civil Engineering Structural Applications

    D7337/D7337M Standard Test Method for Tensile Creep Rupture of Fiber Reinforced Polymer Matrix Composite Bars

    D7522/D7522M Standard Test Method for Pull-Off Strength for FRP Laminate Systems Bonded to Concrete Substrate

    D7565/D7565M Standard Test Method for Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures

    D7616/D7616M Standard Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures

    D7617/D7617M Standard Test Method for Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars

    D7705/D7705M Standard Test Method for Alkali Resistance of Fiber Reinforced Polymer (FRP) Matrix Composite Bars used in Concrete Construction

    D7913/D7913M Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing

    D7914/D7914M Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations


    D30.09 - Sandwich Construction

    C271/C271M Standard Test Method for Density of Sandwich Core Materials

    C272/C272M Standard Test Method for Water Absorption of Core Materials for Sandwich Constructions

    C273/C273M Standard Test Method for Shear Properties of Sandwich Core Materials

    C274 Standard Terminology of Structural Sandwich Constructions

    C297/C297M Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions

    C363/C363M Standard Test Method for Node Tensile Strength of Honeycomb Core Materials

    C364/C364M Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions

    C365/C365M Standard Test Method for Flatwise Compressive Properties of Sandwich Cores

    C366/C366M Standard Test Methods for Measurement of Thickness of Sandwich Cores

    C393/C393M Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure

    C394/C394M Standard Test Method for Shear Fatigue of Sandwich Core Materials

    C480/C480M Standard Test Method for Flexure Creep of Sandwich Constructions

    C481 Standard Test Method for Laboratory Aging of Sandwich Constructions

    D6416/D6416M Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load

    D6772/D6772M Standard Test Method for Dimensional Stability of Sandwich Core Materials

    D6790/D6790M Standard Test Method for Determining Poisson's Ratio of Honeycomb Cores

    D7249/D7249M Standard Test Method for Facing Properties of Sandwich Constructions by Long Beam Flexure

    D7250/D7250M Standard Practice for Determining Sandwich Beam Flexural and Shear Stiffness

    D7336/D7336M Standard Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials

    D7766/D7766M Standard Practice for Damage Resistance Testing of Sandwich Constructions

    D7956/D7956M Standard Practice for Compressive Testing of Thin Damaged Laminates Using a Sandwich Long Beam Fixture Specimen

    F1645/F1645M Standard Test Method for Water Migration in Honeycomb Core Materials


    D30.06 - Interlaminar Properties

    D5528 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites

    D6115 Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites

    D6415/D6415M Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite

    D6671/D6671M Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites

    D7291/D7291M Standard Test Method for Through-Thickness "Flatwise" Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material

    D7905/D7905M Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites


    D30.05 - Structural Test Methods

    D5766/D5766M Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates

    D5961/D5961M Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates

    D6264/D6264M Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force

    D6484/D6484M Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates

    D6742/D6742M Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates

    D6873/D6873M Standard Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates

    D7136/D7136M Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event

    D7137/D7137M Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates

    D7248/D7248M Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens

    D7332/D7332M Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite

    D7615/D7615M Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates


    D30.04 - Lamina and Laminate Test Methods

    D2344/D2344M Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates

    D3039/D3039M Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials

    D3171 Standard Test Methods for Constituent Content of Composite Materials

    D3410/D3410M Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading

    D3479/D3479M Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials

    D3518/D3518M Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate

    D3552 Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites

    D4255/D4255M Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method

    D5229/D5229M Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials

    D5379/D5379M Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method

    D5448/D5448M Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders

    D5449/D5449M Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders

    D5450/D5450M Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders

    D5467/D5467M Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam

    D5687/D5687M Standard Guide for Preparation of Flat Composite Panels with Processing Guidelines for Specimen Preparation

    D6641/D6641M Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture

    D6856/D6856M Standard Guide for Testing Fabric-Reinforced "Textile" Composite Materials

    D7028 Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)

    D7078/D7078M Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method

    D7264/D7264M Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials


    D20.96 - Environmentally Degradable Plastics and Biobased Products

    D3826 Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test

    D5071 Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus

    D5208 Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics

    D5210 Standard Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge

    D5272 Standard Practice for Outdoor Exposure Testing of Photodegradable Plastics

    D5338 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions, Incorporating Thermophilic Temperatures

    D5511 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions

    D5526 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions

    D5988 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in Soil

    D6340 Standard Test Methods for Determining Aerobic Biodegradation of Radiolabeled Plastic Materials in an Aqueous or Compost Environment

    D6400 Standard Specification for Labeling of Plastics Designed to be Aerobically Composted in Municipal or Industrial Facilities

    D6691 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium or Natural Sea Water Inoculum

    D6866 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis

    D6868 Standard Specification for Labeling of End Items that Incorporate Plastics and Polymers as Coatings or Additives with Paper and Other Substrates Designed to be Aerobically Composted in Municipal or Industrial Facilities

    D6954 Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation

    D7026 Standard Guide for Sampling and Reporting of Results for Determination of Biobased Content of Materials via Carbon Isotope Analysis

    D7444 Standard Practice for Heat and Humidity Aging of Oxidatively Degradable Plastics

    D7473 Standard Test Method for Weight Attrition of Plastic Materials in the Marine Environment by Open System Aquarium Incubations

    D7475 Standard Test Method for Determining the Aerobic Degradation and Anaerobic Biodegradation of Plastic Materials under Accelerated Bioreactor Landfill Conditions


    D20.70 - Analytical Methods

    D1505 Standard Test Method for Density of Plastics by the Density-Gradient Technique

    D1601 Standard Test Method for Dilute Solution Viscosity of Ethylene Polymers

    D1603 Standard Test Method for Carbon Black Content in Olefin Plastics

    D1895 Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials

    D1921 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials

    D2124 Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique

    D2238 Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm−1

    D2857 Standard Practice for Dilute Solution Viscosity of Polymers

    D3016 Standard Practice for Use of Liquid Exclusion Chromatography Terms and Relationships

    D3124 Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry

    D3465 Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography

    D3591 Standard Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in Formulated Compounds

    D3594 Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers

    D3749 Standard Test Method for Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins by Gas Chromatographic Headspace Technique

    D4001 Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering

    D4218 Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds By the Muffle-Furnace Technique

    D4275 Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and Ethylene–Vinyl Acetate (EVA) Copolymers By Gas Chromatography

    D4443 Standard Test Method for Determining Residual Vinyl Chloride Monomer Content in PPB Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography

    D4526 Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography

    D4603 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer

    D4754 Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell

    D4883 Standard Test Method for Density of Polyethylene by the Ultrasound Technique

    D494 Standard Test Method for Acetone Extraction of Phenolic Molded or Laminated Products

    D5017 Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance

    D5225 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer

    D5226 Standard Practice for Dissolving Polymer Materials

    D5227 Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins

    D5296 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography

    D5477 Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)

    D5507 Standard Test Method for Determination of Trace Organic Impurities in Monomer Grade Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography

    D5508 Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)

    D5576 Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)

    D5594 Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)

    D5630 Standard Test Method for Ash Content in Plastics

    D6042 Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC)

    D6247 Standard Test Method for Determination of Elemental Content of Polyolefins by Wavelength Dispersive X-ray Fluorescence Spectrometry

    D6248 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry

    D6474 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography

    D6645 Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry

    D6869 Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)

    D6953 Standard Test Method for Determination of Antioxidants and Erucamide Slip Additives in Polyethylene Using Liquid Chromatography (LC)

    D6980 Standard Test Method for Determination of Moisture in Plastics by Loss in Weight

    D7083 Standard Practice for Determination of Monomeric Plasticizers in Poly (Vinyl Chloride) (PVC) by Gas Chromatography

    D7132 Standard Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene Foam

    D7134 Standard Test Method for Molecular Mass Averages and Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser Desorption/Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS)

    D7191 Standard Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor

    D7210 Standard Practice for Extraction of Additives in Polyolefin Plastics

    D7399 Standard Test Method for Determination of the Amount of Polypropylene (PP) in Polypropylene/LDPE Mixtures Using Infrared Spectrophotometer (FTIR)

    D7486 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis

    D7567 Standard Test Method for Determining Gel Content in Crosslinked Ethylene Plastics Using Pressurized Liquid Extraction

    D7823 Standard Test Method for Determination of Low Level, Regulated Phthalates in Poly (Vinyl Chloride) Plastics by Thermal Desorption—Gas Chromatography/Mass Spectrometry

    D792 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement

    D7993 Standard Guide for Analyzing Complex Phthalates


    D20.50 - Durability of Plastics

    D1042 Standard Test Method for Linear Dimensional Changes of Plastics Caused by Exposure to Heat and Moisture

    D1435 Standard Practice for Outdoor Weathering of Plastics

    D1499 Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics

    D1712 Standard Practice for Resistance of Plastics to Sulfide Staining

    D2565 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications

    D3045 Standard Practice for Heat Aging of Plastics Without Load

    D4329 Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics

    D4364 Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight

    D4459 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications

    D4674 Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments

    D543 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents

    D570 Standard Test Method for Water Absorption of Plastics

    D5870 Standard Practice for Calculating Property Retention Index of Plastics

    D618 Standard Practice for Conditioning Plastics for Testing

    D6360 Standard Practice for Enclosed Carbon-Arc Exposures of Plastics


    D20.30 - Thermal Properties

    D1238 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer

    D1525 Standard Test Method for Vicat Softening Temperature of Plastics

    D1790 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact

    D1929 Standard Test Method for Determining Ignition Temperature of Plastics

    D2843 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics

    D2863 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)

    D3014 Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position

    D3123 Standard Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds

    D3364 Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications

    D3418 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry

    D3675 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source

    D3795 Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer

    D3801 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position

    D3835 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer

    D3895 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry

    D4804 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics

    D4986 Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials

    D5025 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials

    D5048 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame

    D5132 Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles

    D5207 Standard Practice for Confirmation of 20–mm (50–W) and 125–mm (500–W) Test Flames for Small-Scale Burning Tests on Plastic Materials

    D5422 Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer

    D5930 Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique

    D635 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position

    D648 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position

    D696 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer

    D7309 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry

    D731 Standard Test Method for Molding Index of Thermosetting Molding Powder

    D746 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact


    D20.24 - Plastic Building Products

    D1494 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels

    D3678 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions

    D3679 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Siding

    D3841 Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels

    D4068 Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane

    D4226 Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products

    D4477 Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit

    D4495 Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight

    D4551 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane

    D4726 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors

    D4756 Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit

    D4803 Standard Test Method for Predicting Heat Buildup in PVC Building Products

    D5206 Standard Test Method for Windload Resistance of Rigid Plastic Siding

    D5319 Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels

    D5926 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems

    D6777 Standard Test Method for Relative Rigidity of Poly(Vinyl Chloride)(PVC) Siding

    D6864 Standard Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products

    D7082 Standard Specification for Polyethylene Stay In Place Form System for End Walls for Drainage Pipe

    D7251 Standard Specification for Color and Appearance Retention of Variegated Color Plastic Siding Products

    D7254 Standard Specification for Polypropylene (PP) Siding

    D7445 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding)

    D7793 Standard Specification for Insulated Vinyl Siding

    D7856 Standard Specification for Color and Appearance Retention of Solid and Variegated Color Plastic Siding Products using CIELab Color Space


    D20.23 - Reinforced Plastic Piping Systems and Chemical Equipment

    C581 Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service

    C582 Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment

    D2105 Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube

    D2143 Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe

    D2310 Standard Classification for Machine-Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

    D2517 Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings

    D2924 Standard Test Method for External Pressure Resistance of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

    D2925 Standard Test Method for Beam Deflection of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow

    D2992 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings

    D2996 Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

    D2997 Standard Specification for Centrifugally Cast "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

    D3262 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe

    D3299 Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks

    D3517 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe

    D3567 Standard Practice for Determining Dimensions of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings

    D3681 Standard Test Method for Chemical Resistance of “Fiberglass” (Glass–Fiber–Reinforced Thermosetting-Resin) Pipe in a Deflected Condition

    D3753 Standard Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells

    D3754 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe

    D3839 Standard Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting-Resin) Pipe

    D3840 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications

    D3982 Standard Specification for Contact Molded “Fiberglass” (Glass Fiber Reinforced Thermosetting Resin) Ducts

    D4024 Standard Specification for Machine Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges

    D4097 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks

    D4161 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals

    D4167 Standard Specification for Fiber-Reinforced Plastic Fans and Blowers

    D4398 Standard Test Method for Determining the Chemical Resistance of Fiberglass-Reinforced Thermosetting Resins by One-Side Panel Exposure

    D5364 Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced (FRP) Plastic Chimney Liners with Coal-Fired Units

    D5365 Standard Test Method for Long-Term Ring-Bending Strain of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

    D5421 Standard Specification for Contact Molded "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges

    D5677 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines

    D5685 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings

    D5813 Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems

    D6041 Standard Specification for Contact-Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings

    D6783 Standard Specification for Polymer Concrete Pipe


    D20.22 - Cellular Materials - Plastics and Elastomers

    D1056 Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber

    D1621 Standard Test Method for Compressive Properties Of Rigid Cellular Plastics

    D1622/D1622M Standard Test Method for Apparent Density of Rigid Cellular Plastics

    D1623 Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics

    D1667 Standard Specification for Flexible Cellular Materials - Poly (Vinyl Chloride) Foam (Closed-Cell)

    D1786 Standard Specification for Toluene Diisocyanate

    D2126 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging

    D2842 Standard Test Method for Water Absorption of Rigid Cellular Plastics

    D3453 Standard Specification for Flexible Cellular Materials—Urethane for Furniture and Automotive Cushioning, Bedding, and Similar Applications

    D3489 Standard Test Methods for Microcellular Urethane Materials

    D3574 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams

    D3575 Standard Test Methods for Flexible Cellular Materials Made From Olefin Polymers

    D3576 Standard Test Method for Cell Size of Rigid Cellular Plastics

    D3676 Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay

    D3748 Standard Practice for Evaluating High-Density Rigid Cellular Plastics

    D3768 Standard Test Method for Microcellular Urethanes—Flexural Recovery

    D3769 Standard Test Method for Microcellular Urethanes--High Temperature Sag

    D3851 Standard Specification for Urethane Microcellular Shoe Soling Materials

    D4273 Standard Test Method for Polyurethane Raw Materials: Determination of Primary Hydroxyl Content of Polyether Polyols

    D4274 Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of Polyols

    D4659 Standard Test Methods for Polyurethane Raw Materials: Determination of Specific Gravity of Isocyanates

    D4660 Standard Test Methods for Polyurethane Raw Materials: Determination of the Isomer Content of Toluenediisocyanate

    D4661 Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine in Isocyanates

    D4662 Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols

    D4663 Standard Test Method for Polyurethane Raw Materials Determination of Hydrolyzable Chlorine of Isocyanates

    D4669 Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols

    D4670 Standard Test Method for Polyurethane Raw Materials: Determination of Suspended Matter In Polyols

    D4671 Standard Test Method for Polyurethane Raw Materials Determination of Unsaturation of Polyols

    D4672 Standard Test Method for Polyurethane Raw Materials: Determination of Water Content of Polyols

    D4819 Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics

    D4875 Standard Test Methods of Polyurethane Raw Materials: Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols

    D4877 Standard Test Method for Polyurethane Raw Materials: Determination of APHA Color in Isocyanates

    D4878 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols

    D4889 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates

    D4890 Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA Color of Polyols

    D5155 Standard Test Methods for Polyurethane Raw Materials: Determination of the Isocyanate Content of Aromatic Isocyanates

    D5523 Standard Test Method for Polyurethane Raw Materials: Acidity by Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates

    D5629 Standard Test Method for Polyurethane Raw Materials Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers

    D5672 Standard Test Method for Testing Flexible Cellular Materials Measurement of Indentation Force Deflection Using a 25-mm (1-in.) Deflection Technique

    D6099 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates

    D6226 Standard Test Method for Open Cell Content of Rigid Cellular Plastics

    D6342 Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy

    D6437 Standard Test Method for Polyurethane Raw Materials: alkalinity in Low-Alkalinity Polyols (Determination of CPR values of Polyols)

    D6576 Standard Specification for Flexible Cellular Rubber Chemically Blown

    D6979 Standard Test Method for Polyurethane Raw Materials: Determination of Basicity in Polyols, Expressed as Percent Nitrogen

    D7133 Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids

    D7252 Standard Test Method for Polyurethane Raw Materials: Determination of Monomer and Isomers in Isocyanates

    D7253 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols

    D7487 Standard Practice for Polyurethane Raw Materials: Polyurethane Foam Cup Test

    D7710 Standard Test Method for Determination of Volume and Density of Rigid and Irregularly Shaped Molded Cellular Materials


    D20.19 - Film, Sheeting, and Molded Products

    C1147 Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics

    D1004 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting

    D1204 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature

    D1239 Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals

    D1593 Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting

    D1709 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method

    D1894 Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting

    D1922 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method

    D1938 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method

    D1998 Standard Specification for Polyethylene Upright Storage Tanks

    D2103 Standard Specification for Polyethylene Film and Sheeting

    D2463 Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers

    D2561 Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers

    D2578 Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films

    D2582 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting

    D2659 Standard Test Method for Column Crush Properties of Blown Thermoplastic Containers

    D2673 Standard Specification for Oriented Polypropylene Film

    D2684 Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products

    D2732 Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting

    D2838 Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting

    D2911 Standard Specification for Dimensions and Tolerances for Plastic Bottles

    D2923 Standard Test Method for Rigidity of Polyolefin Film and Sheeting

    D3354 Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method

    D3420 Standard Test Method for Pendulum Impact Resistance of Plastic Film

    D3981 Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications

    D4204 Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study

    D4272 Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop

    D4321 Standard Test Method for Package Yield of Plastic Film

    D4397 Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications

    D4635 Standard Specification for Polyethylene Films Made from Low-Density Polyethylene for General Use and Packaging Applications

    D4801 Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm [0.010 in.] and Greater

    D5047 Standard Specification for Polyethylene Terephthalate Film and Sheeting

    D5419 Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures

    D5946 Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements

    D6287 Standard Practice for Cutting Film and Sheeting Test Specimens

    D6988 Standard Guide for Determination of Thickness of Plastic Film Test Specimens

    D7192 Standard Test Method for High Speed Puncture Properties of Plastic Films Using Load and Displacement Sensors

    D7310 Standard Guide for Defect Detection and Rating of Plastic Films Using Optical Sensors

    D882 Standard Test Method for Tensile Properties of Thin Plastic Sheeting


    D20.18 - Reinforced Thermosetting Plastics

    D2291 Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites

    D2343 Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics

    D2562 Standard Practice for Classifying Visual Defects in Parts Molded from Reinforced Thermosetting Plastics

    D2563 Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts

    D2584 Standard Test Method for Ignition Loss of Cured Reinforced Resins

    D2734 Standard Test Methods for Void Content of Reinforced Plastics

    D3647 Standard Practice for Classifying Reinforced Plastic Pultruded Shapes According to Composition

    D3846 Standard Test Method for In-Plane Shear Strength of Reinforced Plastics

    D3914 Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod

    D3916 Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod

    D3917 Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes

    D3918 Standard Terminology Relating to Reinforced Plastic Pultruded Products

    D4385 Standard Practice for Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products

    D4475 Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method

    D4476/D4476M Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods

    D5028 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis

    D5117 Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock

    D7029 Standard Test Method for Determination of Reactivity of Unsaturated Polyesters and Vinyl Esters at 180.0F [82.2°C]

    D7745 Standard Practice for Testing Pultruded Composites


    D20.16 - Thermosetting Materials

    D1201 Standard Specification for Thermosetting Polyester Molding Compounds

    D1636 Standard Specification for Allyl Molding Compounds

    D1763 Standard Specification for Epoxy Resins

    D3013 Standard Specification for Epoxy Molding Compounds

    D4350 Standard Test Method for Corrosivity Index of Plastics and Fillers

    D5948 Standard Specification for Molding Compounds, Thermosetting

    D704 Standard Specification for Melamine-Formaldehyde Molding Compounds

    D705 Standard Specification for Urea-Formaldehyde Molding Compounds


    D20.15 - Thermoplastic Materials

    D1045 Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics

    D1203 Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods

    D1243 Standard Test Method for Dilute Solution Viscosity of Vinyl Chloride Polymers

    D1248 Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable

    D1430 Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics

    D1562 Standard Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds

    D1693 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics

    D1710 Standard Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes

    D1755 Standard Specification for Poly(Vinyl Chloride) Resins

    D1784 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds

    D1823 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer

    D1824 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates

    D2115 Standard Practice for Oven Heat Stability of Poly(Vinyl Chloride) Compositions

    D2116 Standard Specification for FEP-Fluorocarbon Molding and Extrusion Materials

    D2222 Standard Test Method for Methanol Extract of Vinyl Chloride Resins

    D2287 Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds

    D2383 Standard Practice for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds Under Humid Conditions

    D2396 Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer

    D2538 Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer

    D2581 Standard Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials

    D2647 Standard Specification for Crosslinkable Ethylene Plastics

    D2765 Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics

    D2839 Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene

    D3012 Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven

    D3030 Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins

    D3159 Standard Specification for Modified ETFE-Fluoropolymer Molding and Extrusion Materials

    D3222 Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials

    D3275 Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials

    D3291 Standard Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression

    D3294 Standard Specification for PTFE Resin Molded Sheet and Molded Basic Shapes

    D3295 Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing

    D3296 Standard Specification for FEP-Fluorocarbon Tube

    D3307 Standard Specification for Perfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion Materials

    D3308 Standard Specification for PTFE Resin Skived Tape

    D3350 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials

    D3367 Standard Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force

    D3368 Standard Specification for FEP-Fluorocarbon Sheet and Film

    D3595 Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film

    D3596 Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins

    D3935 Standard Specification for Polycarbonate (PC) Unfilled and Reinforced Material

    D3965 Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings

    D4020 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials

    D4066 Standard Classification System for Nylon Injection and Extrusion Materials (PA)

    D4067 Standard Classification System for and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods

    D4101 Standard Specification for Polypropylene Injection and Extrusion Materials

    D4203 Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials

    D4216 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds

    D4349 Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials

    D4441 Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene

    D4549 Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)

    D4591 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry

    D4634 Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)

    D4673 Standard Classification System for Acrylonitrile-Butadiene-Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials

    D4745 Standard Classification System and Basis for Specification for Filled Polytetrafluoroethlyene (PTFE) Molding and Extrusion Materials Using ASTM Methods

    D4802 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet

    D4894 Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials

    D4895 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion

    D4969 Standard Specification for Polytetrafluoroethylene–(PTFE) Coated Glass Fabric

    D4976 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials

    D5138 Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP)

    D5203 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer (HDPE) Sources

    D5204 Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials

    D5205 Standard Classification System for Polyetherimide (PEI) Materials

    D5260 Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds

    D5336 Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Materials

    D5436 Standard Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes

    D5491 Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials

    D5492 Standard Test Method for Determination of Xylene Solubles in Propylene Plastics

    D5575 Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers

    D5675 Standard Classification for Low Molecular Weight PTFE and FEP Micronized Powders

    D5857 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology

    D5927 Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods

    D5989 Standard Specification for Extruded and Monomer Cast Shapes Made from Nylon (PA)

    D5998 Standard Specification for Molded Polyethylene Shipping and Storage Drums

    D6040 Standard Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape

    D6098 Standard Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)

    D6100 Standard Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes (POM)

    D6150 Standard Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility

    D6261 Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)

    D6262 Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK)

    D6263 Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)

    D6338 Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPVs) Based on ASTM Standard Test Methods

    D6339 Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS)

    D6358 Standard Classification System and Basis for Specification for Poly (Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ISO Methods

    D6394 Standard Specification for Sulfone Plastics (SP)

    D6456 Standard Specification for Finished Parts Made from Polyimide Resin

    D6457 Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE)

    D6585 Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape

    D6712 Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes

    D6713 Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF)

    D6778 Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM)

    D6779 Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)

    D6835 Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)

    D6865 Standard Classification System and Basis for Specifications for Acrylonitrile–Styrene–Acrylate (ASA) and Acrylonitrile–EPDM&

    D6867 Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing

    D706 Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds

    D707 Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds

    D7193 Standard Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape

    D7194 Standard Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE)

    D7211 Standard Specification for Parts Machined from Polychlorotrifluoroethylene (PCTFE) and Intended for General Use

    D7292 Standard Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI)

    D7293 Standard Specification for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI)

    D7436 Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology

    D7471 Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials

    D7472 Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials

    D7474 Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents

    D787 Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds

    D788 Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds

    D789 Standard Test Methods for Determination of Solution Viscosities of Polyamide (PA)


    D20.10 - Mechanical Properties

    D1043 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test

    D1044 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion

    D1708 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens

    D1822 Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials

    D256 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics

    D2583 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor

    D2990 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics

    D3763 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors

    D4065 Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures

    D4092 Standard Terminology for Plastics: Dynamic Mechanical Properties

    D4093 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials

    D4440 Standard Test Method for Plastics: Dynamic Mechanical Properties Melt Rheology

    D4473 Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior

    D4508 Standard Test Method for Chip Impact Strength of Plastics

    D4812 Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics

    D5023 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)

    D5024 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression

    D5026 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension

    D5045 Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials

    D5083 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens

    D5279 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Torsion

    D5418 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam)

    D5420 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)

    D5592 Standard Guide for Material Properties Needed in Engineering Design Using Plastics

    D5628 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)

    D5947 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens

    D6068 Standard Test Method for Determining J-R Curves of Plastic Materials

    D6110 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics

    D6272 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending

    D638 Standard Test Method for Tensile Properties of Plastics

    D6395 Standard Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics

    D695 Standard Test Method for Compressive Properties of Rigid Plastics

    D7027 Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine

    D7107 Standard Test Method for Creep Measurement of Self-Lubricating Bushings

    D732 Standard Test Method for Shear Strength of Plastics by Punch Tool

    D747 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam

    D7774 Standard Test Method for Flexural Fatigue Properties of Plastics

    D7791 Standard Test Method for Uniaxial Fatigue Properties of Plastics

    D785 Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials

    D790 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials

    D952 Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials

    D953 Standard Test Method for Bearing Strength of Plastics


    D20.09 - Specimen Preparation

    D1896/D1896M Standard Practice for Transfer Molding Test Specimens of Thermosetting Compounds

    D3419 Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds

    D3641 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials

    D4703 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets

    D5224 Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds

    D6289 Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics

    D955 Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics

    D957 Standard Practice for Determining Surface Temperature of Molds for Plastics


    D14.80 - Metal Bonding Adhesives

    D1002 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)

    D1062 Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds

    D1151 Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds

    D1183 Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions

    D1184 Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies

    D1304 Standard Test Methods for Adhesives Relative to Their Use as Electrical Insulation

    D1780 Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives

    D1781 Standard Test Method for Climbing Drum Peel for Adhesives

    D1876 Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)

    D1879 Standard Practice for Exposure of Adhesive Specimens to Ionizing Radiation

    D2094 Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests

    D2095 Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens

    D2293 Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal)

    D2294 Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)

    D2295 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)

    D2557 Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from -267.8 to -55°C (-450 to -67°F)

    D2651 Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding

    D2674 Standard Methods of Analysis of Sulfochromate Etch Solution Used in Surface Preparation of Aluminum

    D2739 Standard Test Method for Volume Resistivity of Conductive Adhesives

    D2918 Standard Test Method for Durability Assessment of Adhesive Joints Stressed in Peel

    D2919 Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading

    D3165 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies

    D3166 Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)

    D3167 Standard Test Method for Floating Roller Peel Resistance of Adhesives

    D3310 Standard Test Method for Determining Corrosivity of Adhesive Materials

    D3433 Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints

    D3482 Standard Practice for Determining Electrolytic Corrosion of Copper by Adhesives

    D3528 Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading

    D3658 Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints

    D3762 Standard Test Method for Adhesive-Bonded Surface Durability of Aluminum (Wedge Test)

    D3933 Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing)

    D4896 Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results

    D5656 Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading

    D5657 Standard Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners

    D6396 Standard Test Method for Testing of Pipe Thread Sealants on Pipe Tees

    D6411/D6411M Standard Specification For Silicone Rubber Room Temperature Vulcanizing Low Outgassing Materials

    D6412/D6412M Standard Specification For Epoxy (Flexible) Adhesive For Bonding Metallic And Nonmetallic Materials

    D896 Standard Practice for Resistance of Adhesive Bonds to Chemical Reagents

    D897 Standard Test Method for Tensile Properties of Adhesive Bonds

    D903 Standard Test Method for Peel or Stripping Strength of Adhesive Bonds

    D950 Standard Test Method for Impact Strength of Adhesive Bonds


    D14.40 - Adhesives for Plastics

    D1828 Standard Practice for Atmospheric Exposure of Adhesive-Bonded Joints and Structures

    D2093 Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding

    D3163 Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading

    D3164 Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading

    D3807 Standard Test Method for Strength Properties of Adhesives in Cleavage Peel by Tension Loading (Engineering Plastics-to-Engineering Plastics)

    D3808 Standard Test Method for Qualitative Determination of Adhesion of Adhesives to Substrates by Spot Adhesion

    D3929 Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method

    D4501 Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method

    D5041 Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints

    D5573 Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints

    D5868 Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding

    D6105 Standard Practice for Application of Electrical Discharge Surface Treatment (Activation) of Plastics for Adhesive Bonding

    D904 Standard Practice for Exposure of Adhesive Specimens to Artificial Light


    D11.37 - Coated Fabrics, Rubber Threads and Seals

    D1330 Standard Specification for Rubber Sheet Gaskets

    D1414 Standard Test Methods for Rubber O-Rings

    D1869 Standard Specification for Rubber Rings for Asbestos-Cement Pipe

    D2527 Standard Specification for Rubber Seals—Splice Strength

    D3393 Standard Specification for Coated Fabrics—Waterproofness

    D3667 Standard Specification for Rubber Seals Used in Flat-Plate Solar Collectors

    D3738 Standard Specification for Rubber-Coated Cloth Hospital Sheeting

    D3771 Standard Specification for Rubber Seals Used in Concentrating Solar Collectors

    D3832 Standard Specification for Rubber Seals Contacting Liquids in Solar Energy Systems

    D3854 Standard Test Method for Rubber Thread-Resistance to Dry Heat

    D3855 Standard Test Method for Rubber Thread-Deterioration Due to Standard Washing Solution Treatment

    D3903 Standard Specification for Rubber Seals Used in Air-Heat Transport of Solar Energy Systems

    D4005 Standard Test Method for Plastic-Coated Fabrics—Completeness of Fusion of PVC Dispersion Coatings

    D5193/D5193M Standard Test Method for Coated Fabrics—Air Retention

    D6515 Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending

    D6909 Standard Specification for High Temperature and Acid-Resistant Fluorocarbon Terpolymer Elastomer

    D751 Standard Test Methods for Coated Fabrics


    D11.23 - Synthetic Rubbers

    D1417 Standard Test Methods for Rubber Latices-Synthetic

    D3185 Standard Test Methods for Rubber-Evaluation of SBR (Styrene-Butadiene Rubber) Including Mixtures With Oil

    D3186 Standard Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Mixed With Carbon Black or Carbon Black and Oil

    D3187 Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Rubber)

    D3188 Standard Test Methods for Rubber-Evaluation of IIR (Isobutene-Isoprene Rubber)

    D3189 Standard Test Methods for Rubber—Evaluation of Solution BR (Polybutadiene Rubber)

    D3190 Standard Test Method for Rubber-Evaluation of Chloroprene Rubber (CR)

    D3403 Standard Test Methods for Rubber—Evaluation of IR (Isoprene Rubber)

    D3484 Standard Test Methods for Rubber—Evaluation of Oil-Extended Solution BR (Polybutadiene Rubber)

    D3568 Standard Test Methods for Rubber—Evaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including Mixtures With Oil

    D3848 Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Copolymers) Mixed With Carbon Black

    D3896 Standard Practice for Rubber From Synthetic Sources—Sampling

    D3958 Standard Test Methods for Rubber—Evaluation of BIIR and CIIR (Halogenated Isobutene—Isoprene Rubber)

    D5605 Standard Practice for Styrene-Butadiene Rubber (SBR)—Establishing Raw Mooney Viscosity Target Values


    D11.22 - Natural Rubber

    D1076 Standard Specification for Rubber—Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex

    D1278 Standard Test Methods for Rubber from Natural Sources—Chemical Analysis

    D1485 Standard Practice for Rubber from Natural Sources—Sampling and Sample Preparation

    D2227 Standard Specification for Natural Rubber (NR) Technical Grades

    D2449 Standard Specification for Rubber Bales From Natural Sources—Limit on Coating

    D3157 Standard Test Method for Rubber from Natural Sources—Color

    D3184 Standard Practice for Rubber - Evaluation of NR (Natural Rubber)

    D3194 Standard Test Method for Rubber From Natural Sources-Plasticity Retention Index (PRI)

    D7050 Standard Practice for Rubber from Natural Sources—Sampling and Sorting Bales Based on Predicted Processing Properties


    D11.20 - Compounding Materials and Procedures

    D1992 Standard Guide for Testing Synthetic Plasticizers Used in Rubber

    D1993 Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption

    D2226 Standard Classification for Various Types of Petroleum Oils for Rubber Compounding Use

    D3182 Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets

    D4295 Standard Classification for Rubber Compounding Materials—Zinc Oxide

    D4315 Standard Test Methods for Rubber Compounding Material—Zinc Oxide

    D4528 Standard Classification for Rubber Compounding Materials—Sulfur

    D4570 Standard Test Method for Rubber Chemicals—Determination of Particle Size of Sulfur by Sieving (Dry)

    D4572 Standard Test Method for Rubber Chemicals—Wet Sieve Analysis of Sulfur

    D4620 Standard Test Method for Evaluating the Effective Surface Area of Zinc Oxide in Rubber

    D4676 Standard Classification for Rubber Compounding Materials—Antidegradants

    D4677 Standard Classification for Rubber Compounding Materials—Titanium Dioxide

    D4678 Standard Practice for Rubber - Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials

    D4817 Standard Classification for Rubber Compounding Materials—Stearic Acid

    D4818 Standard Classification for Rubber Compounding Materials—Vulcanization Accelerators

    D4924 Standard Classification for Petroleum Waxes for Use in Rubber Compounding

    D5377 Standard Classification for Rubber Compounding Materials—Ground Coal

    D5603 Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber

    D5604 Standard Test Methods for Precipitated Silica—Surface Area by Single Point B.E.T. Nitrogen Adsorption

    D5644 Standard Test Methods for Rubber Compounding Materials—Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber

    D5899 Standard Classification System for Rubber Compounding Materials for Use in Computer Material Management Systems

    D5900 Standard Specification for Physical and Chemical Properties of Industry Reference Materials (IRM)

    D6738 Standard Test Method for Precipitated Silica - Volatile Content

    D6739 Standard Test Method for Silica - pH Value

    D6740 Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Residue on Ignition

    D6741 Standard Test Methods for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Sulfur Content

    D6814 Standard Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink Density

    D6843 Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Characterization by Gas Chromatography (GC)

    D6844 Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Characterization by High Performance Liquid Chromatography (HPLC)

    D6845 Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area

    D6854 Standard Test Method for Silica-Oil Absorption Number


    D11.15 - Degradation Tests

    D1052 Standard Test Method for Measuring Rubber Deterioration—Cut Growth Using Ross Flexing Apparatus

    D1148 Standard Test Method for Rubber Deterioration—Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces

    D1149 Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment

    D1171 Standard Test Method for Rubber Deterioration—Surface Ozone Cracking Outdoors or Chamber (Triangular Specimens)

    D1630 Standard Test Method for Rubber Property—Abrasion Resistance (Footwear Abrader)

    D2228 Standard Test Method for Rubber Property-Relative Abrasion Resistance by the Pico Abrader Method

    D3137 Standard Test Method for Rubber Property—Hydrolytic Stability

    D3389 Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)

    D430 Standard Test Methods for Rubber Deterioration—Dynamic Fatigue

    D4482 Test Method for Rubber Property - Extension Cycling Fatigue

    D454 Standard Test Method for Rubber Deterioration by Heat and Air Pressure

    D4575 Standard Test Methods for Rubber Deterioration—Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers

    D471 Standard Test Method for Rubber Property—Effect of Liquids

    D572 Standard Test Method for Rubber-Deterioration by Heat and Oxygen

    D573 Standard Test Method for Rubber—Deterioration in an Air Oven

    D5963 Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader)

    D5964 Standard Practice for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils for ASTM No. 1, ASTM No. 2, and ASTM No. 3 Oils

    D623 Standard Test Methods for Rubber Property—Heat Generation and Flexing Fatigue In Compression

    D750 Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus

    D813 Standard Test Method for Rubber Deterioration—Crack Growth

    D865 Standard Test Method for Rubber - Deterioration by Heating in Air (Test Tube Enclosure)

    D925 Standard Test Methods for Rubber Property—Staining of Surfaces (Contact, Migration, and Diffusion)


    D11.12 - Processability Tests

    D1646 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)

    D1917 Standard Test Methods for Rubber Property—Shrinkage of Raw and Compounded Hot-Polymerized Styrene-Butadiene Rubber (SBR)

    D2084 Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter

    D2230 Standard Test Method for Rubber Property—Extrudability of Unvulcanized Compounds

    D3346 Standard Test Methods for Rubber Property—Processability of Emulsion SBR (Styrene-Butadiene Rubber) With the Mooney Viscometer (Delta Mooney)

    D5099 Standard Test Methods for Rubber—Measurement of Processing Properties Using Capillary Rheometry

    D5289 Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters

    D6048 Standard Practice for Stress Relaxation Testing of Raw Rubber, Unvulcanized Rubber Compounds, and Thermoplastic Elastomers

    D6049 Standard Test Method for Rubber Property—Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates

    D6204 Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers

    D6746 Standard Test Method for Determination of Green Strength and Stress Relaxation of Raw Rubber or Unvulcanized Compounds

    D7605 Standard Test Method for Thermoplastic Elastomers - Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers

    D7723 Standard Test Method for Rubber Property - Macro-Dispersion of Fillers in Compounds

    D926 Standard Test Method for Rubber Property—Plasticity and Recovery (Parallel Plate Method)


    D11.11 - Chemical Analysis

    D1519 Standard Test Methods for Rubber Chemicals—Determination of Melting Range

    D1766 Standard Test Method for Rubber Chemicals - Solubility

    D1817 Standard Test Method for Rubber Chemicals—Density

    D1991 Standard Test Method for Rubber Chemicals—2-Mercaptobenzothiazole (MBT)—Assay

    D2702 Standard Practice for Rubber Chemicals—Determination of Infrared Absorption Characteristics

    D297 Standard Test Methods for Rubber Products—Chemical Analysis

    D3156 Standard Practice for Rubber—Chromatographic Analysis of Antidegradants (Antioxidants, Antiozonants and Stabilizers)

    D3314 Standard Test Method for Rubber—Chemical Analysis for Polystyrene Blocks In SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices

    D3452 Standard Practice for Rubber—Identification by Pyrolysis-Gas Chromatography

    D3566 Standard Practice for Rubber—Determination of Bromine in the Presence of Chlorine by Oxygen Combustion

    D3616 Standard Test Method for Rubber—Determination of Gel, Swelling Index, and Dilute Solution Viscosity

    D3677 Standard Test Methods for Rubber - Identification by Infrared Spectrophotometry

    D3900 Standard Test Methods for Rubber-Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry

    D4004 Standard Test Methods for Rubber—Determination of Metal Content by Flame Atomic Absorption (AAS) Analysis

    D4026 Standard Test Method for Rubber Latex—Styrene-Butadiene Copolymer—Determination of Residual Styrene

    D4075 Standard Test Methods for Rubber Compounding Materials—Flame Atomic Absorption Analysis—Determination of Metals

    D4569 Standard Test Method for Rubber Compounding Materials—Determination of Acidity in Sulfur

    D4571 Standard Test Methods for Rubber Compounding Materials—Determination of Volatile Material

    D4573 Standard Test Method for Rubber Chemicals—Determination of Oil Content in Oil-Treated Sulfur

    D4574 Standard Test Methods for Rubber Compounding Materials—Determination of Ash Content

    D4578 Standard Test Methods for Rubber Chemicals—Determination of Percent Sulfur by Extraction

    D4934 Standard Test Method for Rubber Compounding Materials: 2-Benzothiazyl Sulfenamide Accelerators—Insolubles

    D4936 Standard Test Method for Mercaptobenzothiazole Sulfenamide Assay by Reduction/Titration

    D4937 Standard Test Method for p-Phenylenediamine Antidegradants Purity by Gas Chromatography

    D5044 Standard Test Method for Rubber Compounding Materials—Free 2-Mercaptobenzothiazole (MBT) in Benzothiazyl Disulfide (MBTS)

    D5051 Standard Test Method for Rubber Compounding Materials—Benzothiazyl Disulfide (MBTS)—Assay

    D5054 Standard Test Method for Rubber Chemicals—Diphenyl Guanidine (DPG) and Di-o-tolyl-guanidine (DOTG) Assay

    D5297 Standard Test Methods for Rubber Chemical Accelerator—Purity by High Performance Liquid Chromatography

    D5376 Standard Test Method for Rubber Compounding Materials—Determination of the Basic Nitrogen Content in Rubber Antioxidant: Polymerized TMQ

    D5460 Standard Test Method for Rubber Compounding Materials—Water in Rubber Additives

    D5461 Standard Test Method for Rubber Compounding Materials—Wet Sieve Analysis of Powdered Rubber Compounding Materials

    D5666 Standard Test Method for Rubber Chemical Antidegradants—Purity of p -Phenylenediamine (PPD) Antidegradants by High Performance Liquid Chromatography

    D5667 Standard Test Method for Rubber From Synthetic Sources-Total and Water Soluble Ash

    D5668 Standard Test Methods for Rubber From Synthetic Sources—Volatile Matter

    D5670 Standard Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry

    D5774 Standard Test Methods for Rubber—Chemical Analysis of Extractables

    D5775 Standard Test Method for Rubber—Determination of Bound Styrene in Styrene Butadiene Rubber by Refractive Index

    D5805 Standard Test Methods for Rubber—Determination of Carbon Black in Masterbatches

    D5902 Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value

    D6047 Standard Test Methods for Rubber, Raw—Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers

    D6370 Standard Test Method for Rubber—Compositional Analysis by Thermogravimetry (TGA)


    D11.10 - Physical Testing

    D1053 Standard Test Methods for Rubber Property—Stiffening at Low Temperatures: Flexible Polymers and Coated Fabrics

    D1229 Standard Test Method for Rubber Property-Compression Set at Low Temperatures

    D1329 Standard Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test)

    D1349 Standard Practice for Rubber—Standard Conditions for Testing

    D1415 Standard Test Method for Rubber Property—International Hardness

    D1456 Standard Test Method for Rubber Property—Elongation at Specific Stress

    D1460 Standard Test Method for Rubber Property—Change in Length During Liquid Immersion

    D2136 Standard Test Method for Coated Fabrics—Low-Temperature Bend Test

    D2137 Standard Test Methods for Rubber Property - Brittleness Point of Flexible Polymers and Coated Fabrics

    D2240 Standard Test Method for Rubber Property—Durometer Hardness

    D2632 Standard Test Method for Rubber Property—Resilience by Vertical Rebound

    D3183 Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products

    D3767 Standard Practice for Rubber—Measurement of Dimensions

    D3847 Standard Practice for Rubber—Directions for Achieving Subnormal Test Temperatures

    D395 Standard Test Methods for Rubber Property—Compression Set

    D412 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension

    D531 Standard Test Method for Rubber Property-Pusey and Jones Indentation

    D575 Standard Test Methods for Rubber Properties in Compression

    D5992 Standard Guide for Dynamic Testing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods

    D6147 Standard Test Method for Vulcanized Rubber and Thermoplastic Elastomer—Determination of Force Decay (Stress Relaxation) in Compression

    D624 Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers

    D6601 Standard Test Method for Rubber Properties—Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer

    D7121 Standard Test Method for Rubber Property—Resilience Using Schob Type Rebound Pendulum

    D7426 Standard Test Method for Assignment of the DSC Procedure for Determining Tg of a Polymer or an Elastomeric Compound

    D814 Standard Test Method for Rubber Property—Vapor Transmission of Volatile Liquids

    D832 Standard Practice for Rubber Conditioning For Low Temperature Testing

    D945 Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)

    D991 Standard Test Method for Rubber Property—Volume Resistivity Of Electrically Conductive and Antistatic Products


    D01.53 - Coil Coated Metal

    D3003 Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates

    D3794 Standard Guide for Testing Coil Coatings

    D4145 Standard Test Method for Coating Flexibility of Prepainted Sheet

    D4146 Standard Test Method for Formability of Zinc-Rich Primer/Chromate Complex Coatings on Steel

    D4147 Standard Practice for Applying Coil Coatings Using The Wire-Wound Drawdown Bar

    D5723 Standard Practice for Determination of Chromium Treatment Weight on Metal Substrates by X-Ray Fluorescence

    D5796 Standard Test Method for Measurement of Dry Film Thickness of Thin Film Coil-Coated Systems by Destructive Means Using a Boring Device

    D6491 Standard Practice for Evaluation of Aging Resistance of Prestressed Prepainted Metal In a Dry Heat Test

    D6492 Standard Practice for Detection of Hexavalent Chromium On Zinc and Zinc/Aluminum Alloy Coated Steel

    D6665 Standard Practice for Evaluation of Aging Resistance of Pre-stressed Prepainted Metal in a Boiling Water Test

    D6906 Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence

    D7093 Standard Test Method for Formability of Thin Film Organic Coatings on Steel Over a Biaxially Stretched Dome

    D7376 Standard Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals

    D7639 Standard Test Method for Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence

    D7835/D7835M Standard Test Method for Determining the Solvent Resistance of an Organic Coating using a Mechanical Rubbing Machine

    D7893 Standard Guide for Corrosion Test Panel Preparation, Testing, and Rating of Coil-Coated Building Products


    D01.46 - Industrial Protective Coatings

    C1486 Standard Practice for Testing Chemical-Resistant Broadcast and Slurry-Broadcast Resin Monolithic Floor Surfacings

    C267 Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes

    C307 Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings

    C308 Standard Test Methods for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars

    C413 Standard Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

    C531 Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

    C579 Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

    C580 Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

    C722 Standard Specification for Chemical-Resistant Monolithic Floor Surfacings

    C868 Standard Test Method for Chemical Resistance of Protective Linings

    D2200 Standard Practice for Use of Pictorial Surface Preparation Standards and Guides for Painting Steel Surfaces

    D3276 Standard Guide for Painting Inspectors (Metal Substrates)

    D4417 Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel

    D4541 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers

    D4752 Standard Practice for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub

    D4787 Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates

    D4940 Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blasting Abrasives

    D5043 Standard Practice for Field Identification of Coatings

    D5064 Standard Practice for Conducting a Patch Test to Assess Coating Compatibility

    D5065 Standard Guide for Assessing the Condition of Aged Coatings on Steel Surfaces

    D5162 Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates

    D5402 Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs

    D5702 Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals

    D6206 Standard Practice for Sampling of Coating Films

    D6237 Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)

    D6386 Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting

    D6577 Standard Guide for Testing Industrial Protective Coatings

    D6578/D6578M Standard Practice for Determination of Graffiti Resistance

    D6677 Standard Test Method for Evaluating Adhesion by Knife

    D6943 Standard Practice for Immersion Testing of Industrial Protective Coatings

    D6944 Standard Practice for Resistance of Cured Coatings to Thermal Cycling

    D7055 Standard Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings

    D7127 Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument

    D7234 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers

    D7393 Standard Practice for Indicating Oil in Abrasives

    D7396 Standard Guide for Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting

    D7682 Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty

    D7803 Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Powder Coating

    D7868 Standard Practice for Determining the Dry Fall (Fog) Properties of Protective Coatings


    D01.27 - Accelerated Testing

    D1006/D1006M Standard Practice for Conducting Exterior Exposure Tests of Paints on Wood

    D1014 Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates

    D1735 Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus

    D2201 Standard Practice for Preparation of Zinc-Coated and Zinc-Alloy-Coated Steel Panels for Testing Paint and Related Coating Products

    D2247 Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity

    D2248 Standard Practice for Detergent Resistance of Organic Finishes

    D2454 Standard Practice for Determining the Effect of Overbaking on Organic Coatings

    D2485 Standard Test Methods for Evaluating Coatings For High Temperature Service

    D2803 Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal

    D3361/D3361M Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings

    D3891 Standard Practice for Preparation of Glass Panels for Testing Paint, Varnish, Lacquer, and Related Products

    D4141/D4141M Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings

    D4585/D4585M Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation

    D4587 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings

    D5031/D5031M Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings

    D5722 Standard Practice for Performing Accelerated Outdoor Weathering of Factory-Coated Embossed Hardboard Using Concentrated Natural Sunlight and a Soak-Freeze-Thaw Procedure

    D5894 Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)

    D609 Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products

    D6675 Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel

    D6695 Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings

    D7356/D7356M Standard Test Method for Accelerated Acid Etch Weathering of Automotive Clearcoats Using a Xenon-Arc Exposure Device

    D7869 Standard Practice for Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings

    D822/D822M Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings

    D870 Standard Practice for Testing Water Resistance of Coatings Using Water Immersion


    D01.23 - Physical Properties of Applied Paint Films

    D1005 Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers

    D1212 Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings

    D1474/D1474M Standard Test Methods for Indentation Hardness of Organic Coatings

    D1640/D1640M Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings

    D1653 Standard Test Methods for Water Vapor Transmission of Organic Coating Films

    D2134 Standard Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker

    D2197 Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion

    D2370 Standard Test Method for Tensile Properties of Organic Coatings

    D2794 Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)

    D3359 Standard Test Methods for Measuring Adhesion by Tape Test

    D3363 Standard Test Method for Film Hardness by Pencil Test

    D4060 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser

    D4138 Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means

    D4366 Standard Test Methods for Hardness of Organic Coatings by Pendulum Damping Tests

    D4414 Standard Practice for Measurement of Wet Film Thickness by Notch Gages

    D4708 Standard Practice for Preparation of Uniform Free Films of Organic Coatings

    D5178 Standard Test Method for Mar Resistance of Organic Coatings

    D5179 Standard Test Method for Measuring Adhesion of Organic Coatings to Plastic Substrates by Direct Tensile Testing

    D522/D522M Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings

    D5895 Standard Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders

    D6037 Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings

    D6132 Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage

    D6905 Standard Test Method for Impact Flexibility of Organic Coatings

    D6991 Standard Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method

    D7091 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals

    D7187 Standard Test Method for Measuring Mechanistic Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching

    D7334 Standard Practice for Surface Wettability of Coatings, Substrates and Pigments by Advancing Contact Angle Measurement

    D7490 Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements

    D7541 Standard Practice for Estimating Critical Surface Tensions

    D823 Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels

    D968 Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive


    C28.07 - Ceramic Matrix Composites

    C1275 Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature

    C1292 Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures

    C1337 Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures

    C1341 Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites

    C1358 Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperatures

    C1359 Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross-Section Test Specimens at Elevated Temperatures

    C1360 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures

    C1425 Standard Test Method for Interlaminar Shear Strength of 1–D and 2–D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures

    C1468 Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature

    C1469 Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature

    C1557 Standard Test Method for Tensile Strength and Young’s Modulus of Fibers

    C1773 Standard Test Method for Monotonic Axial Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature


    C28.01 - Mechanical Properties and Performance

    C1161 Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature

    C1198 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Sonic Resonance

    C1211 Standard Test Method for Flexural Strength of Advanced Ceramics at Elevated Temperatures

    C1239 Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics

    C1259 Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration

    C1273 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures

    C1291 Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time-to-Failure for Advanced Monolithic Ceramics

    C1322 Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics

    C1326 Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics

    C1327 Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics

    C1361 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures

    C1366 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures

    C1368 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Strength Testing at Ambient Temperature

    C1421 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature

    C1424 Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature

    C1465 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures

    C1495 Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics

    C1499 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature

    C1525 Standard Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching

    C1576 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Ambient Temperature

    C1683 Standard Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics

    C1684 Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature—Cylindrical Rod Strength


    C26.03 - Neutron Absorber Materials Specifications

    C1031 Standard Specification for Nuclear-Grade Aluminum Oxide Powder

    C1065 Standard Specification for Nuclear-Grade Zirconium Oxide Powder

    C1066 Standard Specification for Nuclear Grade Zirconium Oxide Pellets

    C1076 Standard Specification for Nuclear Grade Hafnium Oxide Pellets

    C1098 Standard Specification for Nuclear-Grade Hafnium Oxide Powder

    C1187 Standard Guide for Establishing Surveillance Test Program for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Spent Fuel Storage Racks

    C1671 Standard Practice for Qualification and Acceptance of Boron Based Metallic Neutron Absorbers for Nuclear Criticality Control for Dry Cask Storage Systems and Transportation Packaging

    C708 Specification for Nuclear-Grade Beryllium Oxide Powder

    C750 Standard Specification for Nuclear-Grade Boron Carbide Powder

    C751 Standard Specification for Nuclear-Grade Boron Carbide Pellets

    C752 Standard Specification for Nuclear-Grade Silver-Indium-Cadmium Alloy

    C760 Standard Test Methods for Chemical and Spectrochemical Analysis of Nuclear-Grade Silver-Indium-Cadmium Alloys

    C784 Standard Specification for Nuclear-Grade Aluminum Oxide-Boron Carbide Composite Pellets

    C785 Standard Specification for Nuclear-Grade Aluminum Oxide Pellets

    C791 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide

    C809 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Aluminum Oxide and AluminumOxide-Boron Carbide Composite Pellets

    C888 Standard Specification for Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder

    C992 Standard Specification for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Spent Fuel Storage Racks


    C26.02 - Fuel and Fertile Material Specifications

    C1052 Standard Practice for Bulk Sampling of Liquid Uranium Hexafluoride

    C1075 Standard Practices for Sampling Uranium-Ore Concentrate

    C1233 Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials

    C1334 Standard Specification for Uranium Oxides with a 235U Content of Less Than 5 % for Dissolution Prior to Conversion to Nuclear-Grade Uranium Dioxide

    C1462 Standard Specification for Uranium Metal Enriched to More than 15 % and Less Than 20 % 235U

    C1703 Standard Practice for Sampling of Gaseous Uranium Hexafluoride

    C753 Standard Specification for Nuclear-Grade, Sinterable Uranium Dioxide Powder

    C757 Standard Specification for Nuclear-Grade Plutonium Dioxide Powder, Sinterable

    C776 Standard Specification for Sintered Uranium Dioxide Pellets

    C787 Standard Specification for Uranium Hexafluoride for Enrichment

    C788 Standard Specification for Nuclear-Grade Uranyl Nitrate Solution or Crystals

    C833 Standard Specification for Sintered (Uranium-Plutonium) Dioxide Pellets

    C922 Standard Specification for Sintered Gadolinium Oxide-Uranium Dioxide Pellets

    C967 Standard Specification for Uranium Ore Concentrate

    C996 Standard Specification for Uranium Hexafluoride Enriched to Less Than 5 % 235U


    C21.04 - Raw Materials

    C1069 Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption

    C1182 Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation

    C322 Standard Practice for Sampling Ceramic Whiteware Clays

    C323 Standard Test Methods for Chemical Analysis of Ceramic Whiteware Clays

    C324 Standard Test Method for Free Moisture in Ceramic Whiteware Clays

    C325 Standard Guide for Wet Sieve Analysis of Ceramic Whiteware Clays

    C326 Standard Test Method for Drying and Firing Shrinkages of Ceramic Whiteware Clays

    C371 Standard Test Method for Wire-Cloth Sieve Analysis of Nonplastic Ceramic Powders

    C689 Standard Test Method for Modulus of Rupture of Unfired Clays

    C690 Standard Test Method for Particle Size Distribution of Alumina or Quartz Powders by Electrical Sensing Zone Technique

    C721 Standard Test Methods for Estimating Average Particle Size of Alumina and Silica Powders by Air Permeability

    C837 Standard Test Method for Methylene Blue Index of Clay

    C866 Standard Test Method for Filtration Rate of Ceramic Whiteware Clays

    C867 Standard Test Method for Soluble Sulfate in Ceramic Whiteware Clays (Photometric Method)

    C925 Standard Guide for Precision Electroformed Wet Sieve Analysis of Nonplastic Ceramic Powders

    C958 Standard Test Method for Particle Size Distribution of Alumina or Quartz by X-Ray Monitoring of Gravity Sedimentation


    C21.01 - Editorial and Terminology

    C242 Standard Terminology of Ceramic Whitewares and Related Products

    F109 Standard Terminology Relating to Surface Imperfections on Ceramics


    C14.08 - Flat Glass

    C1036 Standard Specification for Flat Glass

    C1048 Standard Specification for Heat-Strengthened and Fully Tempered Flat Glass

    C1172 Standard Specification for Laminated Architectural Flat Glass

    C1279 Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass

    C1349 Standard Specification for Architectural Flat Glass Clad Polycarbonate

    C1376 Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass

    C1422/C1422M Standard Specification for Chemically Strengthened Flat Glass

    C1443 Standard Specification for Glasses, Portlight, Circular, Fully Tempered

    C1464 Standard Specification for Bent Glass

    C1503 Standard Specification for Silvered Flat Glass Mirror


    C14.04 - Physical and Mechanical Properties

    C1256 Standard Practice for Interpreting Glass Fracture Surface Features

    C1350M Standard Test Method for Measurement of Viscosity of Glass Between Softening Point and Annealing Range (Approximately 108 Pa·s to Approximately 1013 Pa·s) by Beam Bending (Metric)

    C1351M Standard Test Method for Measurement of Viscosity of Glass Between 104 Pa·s and 108 Pa·s by Viscous Compression of a Solid Right Cylinder [Metric]

    C1426 Standard Practices for Verification and Calibration of Polarimeters

    C158 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)

    C336 Standard Test Method for Annealing Point and Strain Point of Glass by Fiber Elongation

    C338 Standard Test Method for Softening Point of Glass

    C598 Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending

    C623 Standard Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio for Glass and Glass-Ceramics by Resonance

    C657 Standard Test Method for D-C Volume Resistivity of Glass

    C693 Standard Test Method for Density of Glass by Buoyancy

    C729 Standard Test Method for Density of Glass by the Sink-Float Comparator

    C730 Standard Test Method for Knoop Indentation Hardness of Glass

    C770 Standard Test Method for Measurement of Glass Stress—Optical Coefficient

    C829 Standard Practices for Measurement of Liquidus Temperature of Glass by the Gradient Furnace Method

    C965 Standard Practice for Measuring Viscosity of Glass Above the Softening Point

    F105 Standard Specification for Type 58 Borosilicate Sealing Glass

    F14 Standard Practice for Making and Testing Reference Glass-Metal Bead-Seal

    F140 Standard Practice for Making Reference Glass-Metal Butt Seals and Testing for Expansion Characteristics by Polarimetric Methods

    F144 Standard Practice for Making Reference Glass-Metal Sandwich Seal and Testing for Expansion Characteristics by Polarimetric Methods

    F218 Standard Test Method for Measuring Optical Retardation and Analyzing Stress in Glass

    F79 Standard Specification for Type 101 Sealing Glass


    C08.09 - Monolithics

    C1054 Standard Practice for Pressing and Drying Refractory Plastic and Ramming Mix Specimens

    C1445 Standard Test Method for Measuring Consistency of Castable Refractory Using a Flow Table

    C1446 Standard Test Method for Measuring Consistency of Self-Flowing Castable Refractories

    C1656 Standard Guide for Measuring the Reactivity of Hydraulic Refractory Castables using Exothermic Profile

    C179 Standard Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens

    C181 Standard Test Method for Workability Index of Fireclay and High-Alumina Refractory Plastics

    C860 Standard Test Method for Determining the Consistency of Refractory Castable Using the Ball-In-Hand Test

    C862 Standard Practice for Preparing Refractory Concrete Specimens by Casting

    C865 Standard Practice for Firing Refractory Concrete Specimens

    C903 Standard Practice for Preparing Refractory Castable Specimens by Cold Gunning

    C973 Standard Practice for Preparing Test Specimens From Basic Refractory Gunning Products by Pressing

    C974 Standard Practice for Preparing Test Specimens from Basic Refractory Castable Products by Casting

    C975 Standard Practice for Preparing Test Specimens from Basic Refractory Ramming Products by Pressing


    C08.04 - Chemical Behaviors

    C288 Standard Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide

    C454 Standard Test Method for Disintegration of Carbon Refractories by Alkali

    C456 Standard Test Method for Hydration Resistance of Basic Bricks and Shapes

    C492 Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite

    C544 Standard Test Method for Hydration of Dead Burned Magnesite or Periclase Grain

    C607 Standard Practice for Coking Large Shapes of Carbon-Bearing Materials

    C831 Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes 

    C863 Standard Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures

    C874 Standard Test Method for Rotary Slag Testing of Refractory Materials


    C08.03 - Physical Properties

    C113 Standard Test Method for Reheat Change of Refractory Brick

    C134 Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick

    C135 Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion

    C1407 Standard Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes

    C20 Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water

    C210 Standard Test Method for Reheat Change of Insulating Firebrick

    C357 Standard Test Method for Bulk Density of Granular Refractory Materials

    C577 Standard Test Method for Permeability of Refractories

    C604 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer

    C704/C704M Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature

    C830 Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure

    C914 Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion

    C92 Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials


    C08.02 - Thermal Properties

    C108 Standard Symbols for Heat Transmission

    C1113/C1113M Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)

    C1171 Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories

    C182 Standard Test Method for Thermal Conductivity of Insulating Firebrick

    C201 Standard Test Method for Thermal Conductivity of Refractories

    C202 Standard Test Method for Thermal Conductivity of Refractory Brick

    C24 Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High Alumina Refractory Materials

    C417 Standard Test Method for Thermal Conductivity of Unfired Monolithic Refractories

    C767 Standard Test Method for Thermal Conductivity of Carbon Refractories


    C08.01 - Strength

    C1099 Standard Test Method for Modulus of Rupture of Carbon-Containing Refractory Materials at Elevated Temperatures

    C133 Standard Test Methods for Cold Crushing Strength and Modulus of Rupture of Refractories

    C1419 Standard Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young’s Modulus

    C1548 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio of Refractory Materials by Impulse Excitation of Vibration

    C16 Standard Test Method for Load Testing Refractory Shapes at High Temperatures

    C198 Standard Test Method for Cold Bonding Strength of Refractory Mortar

    C199 Standard Test Method for Pier Test for Refractory Mortars

    C583 Standard Test Method for Modulus of Rupture of Refractory Materials at Elevated Temperatures

    C832 Standard Test Method of Measuring Thermal Expansion and Creep of Refractories Under Load

    C885 Standard Test Method for Young's Modulus of Refractory Shapes by Sonic Resonance


    B10.03 - Niobium and Tantalum

    B364 Standard Specification for Tantalum and Tantalum Alloy Ingots

    B365 Standard Specification for Tantalum and Tantalum Alloy Rod and Wire

    B391 Standard Specification for Niobium and Niobium Alloy Ingots

    B392 Standard Specification for Niobium and Niobium Alloy Bar, Rod, and Wire

    B393 Standard Specification for Niobium and Niobium Alloy Strip, Sheet, and Plate

    B394 Standard Specification for Niobium and Niobium Alloy Seamless and Welded Tubes

    B521 Standard Specification for Tantalum and Tantalum Alloy Seamless and Welded Tubes

    B652/B652M Standard Specification for Niobium-Hafnium Alloy Ingots

    B654/B654M Standard Specification for Niobium-Hafnium Alloy Foil, Sheet, Strip, and Plate

    B655/B655M Standard Specification for Niobium-Hafnium Alloy Bar and Wire

    B708 Standard Specification for Tantalum and Tantalum Alloy Plate, Sheet, and Strip

    B884 Standard Specification for Niobium-Titanium Alloy Billets, Bar, and Rod for Superconducting Applications


    B10.02 - Zirconium and Hafnium

    B349/B349M Standard Specification for Zirconium Sponge and Other Forms of Virgin Metal for Nuclear Application

    B350/B350M Standard Specification for Zirconium and Zirconium Alloy Ingots for Nuclear Application

    B351/B351M Standard Specification for Hot-Rolled and Cold-Finished Zirconium and Zirconium Alloy Bars, Rod, and Wire for Nuclear Application

    B352/B352M Standard Specification for Zirconium and Zirconium Alloy Sheet, Strip, and Plate for Nuclear Application

    B353 Standard Specification for Wrought Zirconium and Zirconium Alloy Seamless and Welded Tubes for Nuclear Service (Except Nuclear Fuel Cladding)

    B493/B493M Standard Specification for Zirconium and Zirconium Alloy Forgings

    B494/B494M Standard Specification for Primary Zirconium

    B495 Standard Specification for Zirconium and Zirconium Alloy Ingots

    B523/B523M Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Tubes

    B550/B550M Standard Specification for Zirconium and Zirconium Alloy Bar and Wire

    B551/B551M Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate

    B614 Standard Practice for Descaling and Cleaning Zirconium and Zirconium Alloy Surfaces

    B653/B653M Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Welding Fittings

    B658/B658M Standard Specification for Seamless and Welded Zirconium and Zirconium Alloy Pipe

    B737 Standard Specification for Hot-Rolled and/or Cold-Finished Hafnium Rod and Wire

    B752 Standard Specification for Castings, Zirconium-Base, Corrosion Resistant, for General Application

    B776 Standard Specification for Hafnium and Hafnium Alloy Strip, Sheet, and Plate

    B811 Standard Specification for Wrought Zirconium Alloy Seamless Tubes for Nuclear Reactor Fuel Cladding

    G2/G2M Standard Test Method for Corrosion Testing of Products of Zirconium, Hafnium, and Their Alloys in Water at 680°F (360°C) or in Steam at 750°F (400°C)


    B10.01 - Titanium

    B265 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate

    B299 Standard Specification for Titanium Sponge

    B338 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Tubes for Condensers and Heat Exchangers

    B348 Standard Specification for Titanium and Titanium Alloy Bars and Billets

    B363 Standard Specification for Seamless and Welded Unalloyed Titanium and Titanium Alloy Welding Fittings

    B367 Standard Specification for Titanium and Titanium Alloy Castings

    B381 Standard Specification for Titanium and Titanium Alloy Forgings

    B600 Standard Guide for Descaling and Cleaning Titanium and Titanium Alloy Surfaces

    B861 Standard Specification for Titanium and Titanium Alloy Seamless Pipe

    B862 Standard Specification for Titanium and Titanium Alloy Welded Pipe

    B863 Standard Specification for Titanium and Titanium Alloy Wire

    B891 Standard Specification for Seamless and Welded Titanium and Titanium Alloy Condenser and Heat Exchanger Tubes with Enhanced Surface for Improved Heat Transfer

    B898 Standard Specification for Reactive and Refractory Metal Clad Plate

    B977 Standard Specification for Titanium and Titanium Ingots


    B09.11 - Near Full Density Powder Metallurgy Materials

    B311 Standard Test Method for Density of Powder Metallurgy (PM) Materials Containing Less Than Two Percent Porosity

    B795 Standard Test Method for Determining the Percentage of Alloyed or Unalloyed Iron Contamination Present in Powder Forged (PF) Steel Materials

    B796 Standard Test Method for Nonmetallic Inclusion Content of Ferrous Powders Intended for Powder Forging (PF) Applications

    B797 Standard Test Method for Surface Finger Oxide Penetration Depth and Presence of Interparticle Oxide Networks in Powder Forged (P/F) Steel Parts

    B848 Specification for Powder Forged (P/F) Ferrous Materials

    B853 Standard Specification for Powder Metallurgy (PM) Boron Stainless Steel Structural Components

    B883 Standard Specification for Metal Injection Molding (MIM) Ferrous Materials

    B988 Standard Specification for Powder Metallurgy (PM) Titanium and Titanium Alloy Structural Components


    B09.06 - Cemented Carbides

    B276 Standard Test Method for Apparent Porosity in Cemented Carbides

    B294 Standard Test Method for Hardness Testing of Cemented Carbides

    B406 Standard Test Method for Transverse Rupture Strength of Cemented Carbides

    B657 Guide for Metallographic Identification of Microstructure in Cemented Carbides

    B665 Standard Guide for Metallographic Sample Preparation of Cemented Tungsten Carbides

    B771 Standard Test Method for Short Rod Fracture Toughness of Cemented Carbides

    B886 Standard Test Method for Determination of Magnetic Saturation (Ms) of Cemented Carbides

    B887 Standard Test Method for Determination of Coercivity (Hcs) of Cemented Carbides

    B890 Standard Test Method for Determination of Metallic Constituents of Tungsten Alloys and Tungsten Hardmetals by X-Ray Fluorescence Spectrometry

    B930 Standard Test Method for Rating Grain Size and Frequency of Abnormally Large Grains in Cemented Tungsten Carbides (Hardmetals)


    B09.05 - Structural Parts

    B528 Standard Test Method for Transverse Rupture Strength of Powder Metallurgy (PM) Specimens

    B595 Standard Specification for Sintered Aluminum Structural Parts

    B783 Standard Specification for Materials for Ferrous Powder Metallurgy (PM) Structural Parts

    B823 Standard Specification for Materials for Copper Base Powder Metallurgy (PM) Structural Parts

    B895 Standard Test Methods for Evaluating the Corrosion Resistance of Stainless Steel Powder Metallurgy (PM) Parts/Specimens by Immersion in a Sodium Chloride Solution

    B931 Standard Test Method for Metallographically Estimating the Observed Case Depth of Ferrous Powder Metallurgy (PM) Parts

    B933 Standard Test Method for Microindentation Hardness of Powder Metallurgy (PM) Materials

    B934 Standard Test Method for Effective Case Depth of Ferrous Powder Metallurgy (P/M) Parts Using Microindentation Hardness Measurements

    B935 Standard Guide for Steam Treatment of Ferrous Powder Metallurgy (P/M) Materials

    B946 Standard Test Method for Surface Finish of Powder Metallurgy (P/M) Products


    B09.04 - Bearings

    B438 Standard Specification for Bronze-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)

    B439 Standard Specification for Iron-Base Powder Metallurgy (PM) Bearings (Oil-Impregnated)

    B939 Standard Test Method for Radial Crushing Strength, K, of Powder Metallurgy (PM) Bearings and Structural Materials

    B962 Standard Test Methods for Density of Compacted or Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle

    B963 Standard Test Methods for Oil Content, Oil-Impregnation Efficiency, and Surface-Connected Porosity of Sintered Powder Metallurgy (PM) Products Using Archimedes’ Principle

    B966 Standard Test Method for Permeability of Powder Metallurgy (PM) Bearings Using Nitrogen Gas

    B970 Standard Test Method for Cleanliness of Powder Metallurgy (PM) Bearings and Structural Parts


    B09.03 - Refractory Metal Powders

    B329 Standard Test Method for Apparent Density of Metal Powders and Compounds Using the Scott Volumeter

    B330 Standard Test Methods for Estimating Average Particle Size of Metal Powders and Related Compounds Using Air Permeability

    B527 Standard Test Method for Tap Density of Metal Powders and Compounds

    B761 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by X-Ray Monitoring of Gravity Sedimentation

    B859 Standard Practice for De-Agglomeration of Refractory Metal Powders and Their Compounds Prior to Particle Size Analysis

    B922 Standard Test Method for Metal Powder Specific Surface Area by Physical Adsorption

    B923 Standard Test Method for Metal Powder Skeletal Density by Helium or Nitrogen Pycnometry


    B09.02 - Base Metal Powders

    B212 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel

    B213 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel

    B214 Standard Test Method for Sieve Analysis of Metal Powders

    B215 Standard Practices for Sampling Metal Powders

    B312 Standard Test Method for Green Strength of Specimens Compacted from Metal Powders

    B331 Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction

    B417 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel

    B610 Standard Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders

    B703 Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter

    B821 Standard Guide for Liquid Dispersion of Metal Powders and Related Compounds for Particle Size Analysis

    B822 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering

    B855 Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel

    B873 Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417

    B925 Standard Practices for Production and Preparation of Powder Metallurgy (PM) Test Specimens

    B964 Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel

    E159 Standard Test Method for Loss of Mass in Hydrogen for Cobalt, Copper, Tungsten, and Iron Powders (Hydrogen Loss)

    E194 Standard Test Method for Acid-Insoluble Content of Copper and Iron Powders


    B08.12 - Materials for Porcelain Enamel and Ceramic-Metal Systems

    B915 Standard Test Method for Measuring Static Heat Resistance of Self-Cleaning Oven Coating

    B916 Standard Test Method for Adherence of Porcelain Enamel Coatings to Sheet Metal

    C282 Standard Test Method for Acid Resistance of Porcelain Enamels (Citric Acid Spot Test)

    C283 Standard Test Methods for Resistance of Porcelain Enameled Utensils to Boiling Acid

    C285 Standard Test Methods for Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel

    C286 Standard Terminology Relating to Porcelain Enamel and Ceramic-Metal Systems

    C346 Standard Test Method for 45-deg Specular Gloss of Ceramic Materials

    C374 Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods)

    C375 Standard Classification of Water Used in Milling of Porcelain Enamel

    C385 Standard Test Method for Thermal Shock Resistance of Porcelain-Enameled Utensils

    C448 Standard Test Methods for Abrasion Resistance of Porcelain Enamels

    C536 Standard Test Method for Continuity of Coatings in Glassed Steel Equipment by Electrical Testing

    C537 Standard Test Method for Reliability of Glass Coatings on Glassed Steel Reaction Equipment by High Voltage

    C538 Standard Test Method for Color Retention of Red, Orange, and Yellow Porcelain Enamels

    C539 Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Ceramic Whiteware Materials by Interferometric Method

    C614 Standard Test Method for Alkali Resistance of Porcelain Enamels

    C632 Standard Test Method for Reboiling Tendency of Sheet Steel for Porcelain Enameling

    C633 Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings

    C660 Standard Practices for Production and Preparation of Gray Iron Castings for Porcelain Enameling

    C664 Standard Test Methods for Thickness of Diffusion Coating

    C694 Standard Test Method for Weight Loss (Mass Loss) of Sheet Steel During Immersion in Sulfuric Acid Solution

    C703 Standard Test Methods for Spalling Resistance of Porcelain Enameled Aluminum

    C715 Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis

    C743 Standard Test Method for Continuity of Porcelain Enamel Coatings

    C756 Standard Test Method for Cleanability of Surface Finishes

    C774 Standard Test Method for Yield Strength of Enameling Steels After Straining and Firing

    C810 Standard Test Method for Nickel on Steel for Porcelain Enameling by X-Ray Emission Spectrometry

    C839 Standard Test Method for Compressive Stress of Porcelain Enamels by Loaded-Beam Method

    C872 Standard Test Method for Lead and Cadmium Release from Porcelain Enamel Surfaces


    B08.10 - Test Methods

    B244 Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments

    B368 Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)

    B380 Standard Test Method for Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure

    B487 Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of Cross Section

    B489 Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals

    B490 Standard Practice for Micrometer Bend Test for Ductility of Electrodeposits

    B499 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals

    B504 Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method

    B530 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates

    B555 Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test

    B556 Standard Guide for Measurement of Thin Chromium Coatings by Spot Test

    B567 Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method

    B568 Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry

    B571 Standard Practice for Qualitative Adhesion Testing of Metallic Coatings

    B578 Standard Test Method for Microhardness of Electroplated Coatings

    B588 Standard Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam Interference Microscope Technique

    B602 Standard Test Method for Attribute Sampling of Metallic and Inorganic Coatings

    B636 Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer

    B659 Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings

    B678 Standard Test Method for Solderability of Metallic-Coated Products

    B697 Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings

    B748 Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope

    B762 Standard Test Method of Variables Sampling of Metallic and Inorganic Coatings

    B764 Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)

    B765 Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings

    B767 Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures

    B809 Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (“Flowers-of-Sulfur”)

    B839 Standard Test Method for Residual Embrittlement in Metallic Coated, Externally Threaded Articles, Fasteners, and Rod-Inclined Wedge Method

    B866 Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion

    B877 Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA) Method

    B905 Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test


    B08.07 - Conversion Coatings

    B136 Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum

    B137 Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum

    B201 Standard Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces

    B449 Standard Specification for Chromates on Aluminum

    B457 Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum

    B580 Standard Specification for Anodic Oxide Coatings on Aluminum

    B680 Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution

    B879 Standard Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys

    B893 Standard Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications

    B912 Standard Specification for Passivation of Stainless Steels Using Electropolishing

    B921 Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys

    B940 Standard Practice for Testing Non-Chromate Coatings on Zinc and Cadmium Surfaces

    D1730 Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting

    D1731 Standard Practices for Preparation of Hot-Dip Aluminum Surfaces for Painting

    D1732 Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting


    B08.06 - Soft Metals

    B200 Standard Specification for Electrodeposited Coatings of Lead and Lead-Tin Alloys on Steel and Ferrous Alloys

    B545 Standard Specification for Electrodeposited Coatings of Tin

    B579 Standard Specification for Electrodeposited Coatings of Tin-Lead Alloy (Solder Plate)

    B605 Standard Specification for Electrodeposited Coatings of Tin-Nickel Alloy

    B633 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel

    B635 Standard Specification for Coatings of Cadmium-Tin Mechanically Deposited

    B695 Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel

    B696 Standard Specification for Coatings of Cadmium Mechanically Deposited

    B699 Standard Specification for Coatings of Cadmium Vacuum-Deposited on Iron and Steel

    B766 Standard Specification for Electrodeposited Coatings of Cadmium

    B816 Standard Specification for Coatings of Cadmium-Zinc Mechanically Deposited

    B840 Standard Specification for Electrodeposited Coatings for Zinc Cobalt Alloy Deposits

    B841 Standard Specification for Electrodeposited Coatings for Zinc Nickel Alloy Deposits

    B842 Standard Specification for Electrodeposited Coatings for Zinc Iron Alloy Deposits


    B08.05 - Decorative Coatings

    B456 Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium

    B533 Standard Test Method for Peel Strength of Metal Electroplated Plastics

    B537 Standard Practice for Rating of Electroplated Panels Subjected to Atmospheric Exposure

    B604 Standard Specification for Decorative Electroplated Coatings of Copper Plus Nickel Plus Chromium on Plastics

    B651 Standard Test Method for Measurement of Corrosion Sites in Nickel Plus Chromium or Copper Plus Nickel Plus Chromium Electroplated Surfaces with Double-Beam Interference Microscope


    B08.04 - Precious Metal Coatings

    B488 Standard Specification for Electrodeposited Coatings of Gold for Engineering Uses

    B634 Standard Specification for Electrodeposited Coatings of Rhodium for Engineering Use

    B679 Standard Specification for Electrodeposited Coatings of Palladium for Engineering Use

    B700 Standard Specification for Electrodeposited Coatings of Silver for Engineering Use

    B984 Standard Specification for Electrodeposited Coatings of Palladium- Cobalt Alloy for Engineering Use


    B08.03 - Engineering Coatings

    B177/B177M Standard Guide for Engineering Chromium Electroplating

    B607 Standard Specification for Autocatalytic Nickel Boron Coatings for Engineering Use

    B650 Standard Specification for Electrodeposited Engineering Chromium Coatings on Ferrous Substrates

    B689 Standard Specification for Electroplated Engineering Nickel Coatings

    B733 Standard Specification for Autocatalytic (Electroless) Nickel-Phosphorus Coatings on Metal

    B734 Standard Specification for Electrodeposited Copper for Engineering Uses

    B832 Standard Guide for Electroforming with Nickel and Copper

    B867 Standard Specification for Electrodeposited Coatings of Palladium-Nickel for Engineering Use

    B874 Standard Specification for Chromium Diffusion Coating Applied by Pack Cementation Process

    B875 Standard Specification for Aluminum Diffusion Coating Applied by Pack Cementation Process

    B904 Standard Specification for Autocatalytic Nickel over Autocatalytic Copper for Electromagnetic Interference Shielding

    B994/B994M Standard Specification for Nickel-Cobalt Alloy Coating


    B08.02 - Pre Treatment

    B183 Standard Practice for Preparation of Low-Carbon Steel for Electroplating

    B242 Standard Guide for Preparation of High-Carbon Steel for Electroplating

    B252 Standard Guide for Preparation of Zinc Alloy Die Castings for Electroplating and Conversion Coatings

    B253 Standard Guide for Preparation of Aluminum Alloys for Electroplating

    B254 Standard Practice for Preparation of and Electroplating on Stainless Steel

    B281 Standard Practice for Preparation of Copper and Copper-Base Alloys for Electroplating and Conversion Coatings

    B319 Standard Guide for Preparation of Lead and Lead Alloys for Electroplating

    B320 Standard Practice for Preparation of Iron Castings for Electroplating

    B322 Standard Guide for Cleaning Metals Prior to Electroplating

    B343 Standard Practice for Preparation of Nickel for Electroplating with Nickel

    B480 Standard Guide for Preparation of Magnesium and Magnesium Alloys for Electroplating

    B481 Standard Practice for Preparation of Titanium and Titanium Alloys for Electroplating

    B482 Standard Practice for Preparation of Tungsten and Tungsten Alloys for Electroplating

    B558 Standard Practice for Preparation of Nickel Alloys for Electroplating

    B629 Standard Practice for Preparation of Molybdenum and Molybdenum Alloys for Electroplating

    B630 Standard Practice for Preparation of Chromium for Electroplating with Chromium

    B727 Standard Practice for Preparation of Plastics Materials for Electroplating

    B849 Standard Specification for Pre-Treatments of Iron or Steel for Reducing Risk of Hydrogen Embrittlement

    B850 Standard Guide for Post-Coating Treatments of Steel for Reducing the Risk of Hydrogen Embrittlement

    B851 Standard Specification for Automated Controlled Shot Peening of Metallic Articles Prior to Nickel, Autocatalytic Nickel, or Chromium Plating, or as Final Finish


    B07.05 - Testing

    B557 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products

    B557M Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products (Metric)

    B565 Standard Test Method for Shear Testing of Aluminum and Aluminum-Alloy Rivets and Cold-Heading Wire and Rods

    B645 Standard Practice for Linear-Elastic Plane-Strain Fracture Toughness Testing of Aluminum Alloys

    B646 Standard Practice for Fracture Toughness Testing of Aluminum Alloys

    B647 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage

    B648 Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Barcol Impressor

    B769 Standard Test Method for Shear Testing of Aluminum Alloys

    B831 Standard Test Method for Shear Testing of Thin Aluminum Alloy Products

    B871 Standard Test Method for Tear Testing of Aluminum Alloy Products

    B909 Standard Guide for Plane Strain Fracture Toughness Testing of Non-Stress Relieved Aluminum Products

    B985 Standard Practice for Sampling Aluminum Ingots, Billets, Castings and Finished or Semi-Finished Wrought Aluminum Products for Compositional Analysis

    E252 Standard Test Method for Thickness of Foil, Thin Sheet, and Film by Mass Measurement


    B07.04 - Magnesium Alloy Cast and Wrought Products

    B107/B107M Standard Specification for Magnesium-Alloy Extruded Bars, Rods, Profiles, Tubes, and Wire

    B199 Standard Specification for Magnesium-Alloy Permanent Mold Castings

    B296 Standard Practice for Temper Designations of Magnesium Alloys, Cast and Wrought

    B403 Standard Specification for Magnesium-Alloy Investment Castings

    B661 Standard Practice for Heat Treatment of Magnesium Alloys

    B80 Standard Specification for Magnesium-Alloy Sand Castings

    B843 Standard Specification for Magnesium Alloy Anodes for Cathodic Protection

    B90/B90M Standard Specification for Magnesium-Alloy Sheet and Plate

    B91 Standard Specification for Magnesium-Alloy  Forgings

    B92/B92M Standard Specification for Unalloyed Magnesium Ingot and Stick For Remelting

    B93/B93M Standard Specification for Magnesium Alloys in Ingot Form for Sand Castings, Permanent Mold Castings, and Die Castings

    B94 Standard Specification for Magnesium-Alloy Die Castings

    B951 Standard Practice for Codification of Unalloyed Magnesium and Magnesium-Alloys, Cast and Wrought

    B953 Standard Practice for Sampling Magnesium and Magnesium Alloys for Spectrochemical Analysis

    B954 Standard Test Method for Analysis of Magnesium and Magnesium Alloys by Atomic Emission Spectrometry


    B07.03 - Aluminum Alloy Wrought Products

    B209 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate

    B209M Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric)

    B210 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes

    B210M Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes (Metric)

    B211 Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire

    B211M Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold-Finished Bar, Rod, and Wire (Metric)

    B221 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes

    B221M Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes (Metric)

    B234 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers

    B234M Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers [Metric]

    B236 Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars)

    B236M Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) [Metric]

    B241/B241M Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube

    B247 Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings

    B247M Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings [Metric]

    B308/B308M Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles

    B313/B313M Standard Specification for Aluminum and Aluminum-Alloy Round Welded Tubes

    B316/B316M Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods

    B317/B317M Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor)

    B345/B345M Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems

    B361 Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings

    B429/B429M Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube

    B483/B483M Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Drawn Pipe for General Purpose Applications

    B491/B491M Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications

    B547/B547M Standard Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube

    B548 Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels

    B594 Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products

    B632/B632M Standard Specification for Aluminum-Alloy Rolled Tread Plate

    B660 Standard Practices for Packaging/Packing of Aluminum and Magnesium Products

    B666/B666M Standard Practice for Identification Marking of Aluminum and Magnesium Products

    B807/B807M Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys

    B881 Standard Terminology Relating to Aluminum- and Magnesium- Alloy Products

    B918/B918M Standard Practice for Heat Treatment of Wrought Aluminum Alloys

    B926 Standard Method for Pinhole Determination in Aluminum and Aluminum Alloy Plain Foil by Means of a Light Table

    B928/B928M Standard Specification for High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service and Similar Environments

    B945 Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1, T2, T5 and T10–Type Tempers

    B947 Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate


    B07.01 - Aluminum Alloy Ingots and Castings

    B108/B108M Standard Specification for Aluminum-Alloy Permanent Mold Castings

    B179 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes

    B26/B26M Standard Specification for Aluminum-Alloy Sand Castings

    B37 Standard Specification for Aluminum for Use in Iron and Steel Manufacture

    B618/B618M Standard Specification for Aluminum-Alloy Investment Castings

    B686/B686M Standard Specification for Aluminum Alloy Castings, High-Strength

    B85/B85M Standard Specification for Aluminum-Alloy Die Castings

    B917/B917M Standard Practice for Heat Treatment of Aluminum-Alloy Castings from All Processes

    B955/B955M Standard Specification for Aluminum-Alloy Centrifugal Castings

    B969/B969M Standard Specification for Aluminum-Alloy Castings Produced by Squeeze Casting, Thixocast and Rheocast Semi-Solid Casting Processes


    B05.07 - Refined Copper

    B115 Standard Specification for Electrolytic Copper Cathode

    B170 Standard Specification for Oxygen-Free Electrolytic Copper—Refinery Shapes

    B216 Standard Specification for Tough-Pitch Fire-Refined Copper—Refinery Shapes

    B224 Standard Classification of Coppers

    B379 Standard Specification for Phosphorized Coppers—Refinery Shapes

    B49 Standard Specification for Copper Rod for Electrical Purposes

    B5 Standard Specification for High Conductivity Tough-Pitch Copper Refinery Shapes


    B05.06 - Methods of Test

    B153 Standard Test Method for Expansion (Pin Test) of Copper and Copper-Alloy Pipe and Tubing

    B154 Standard Test Method for Mercurous Nitrate Test for Copper Alloys

    B428 Standard Test Method for Angle of Twist in Rectangular and Square Copper and Copper Alloy Tube

    B577 Standard Test Methods for Detection of Cuprous Oxide (Hydrogen Embrittlement Susceptibility) in Copper

    B593 Standard Test Method for Bending Fatigue Testing for Copper-Alloy Spring Materials

    B598 Standard Practice for Determining Offset Yield Strength in Tension for Copper Alloys

    B754 Standard Test Method for Measuring and Recording the Deviations from Flatness in Copper and Copper Alloy Strip

    B820 Standard Test Method for Bend Test for Determining the Formability of Copper and Copper Alloy Strip

    B858 Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys

    B968/B968M Standard Test Method for Flattening of Copper and Copper-Alloy Pipe and Tube


    B05.05 - Castings and Ingots for Remelting

    B148 Standard Specification for Aluminum-Bronze Sand Castings

    B176 Standard Specification for Copper-Alloy Die Castings

    B208 Standard Practice for Preparing Tension Test Specimens for Copper Alloy Sand, Permanent Mold, Centrifugal, and Continuous Castings

    B22/B22M Standard Specification for Bronze Castings for Bridges and Turntables

    B271/B271M Standard Specification for Copper-Base Alloy Centrifugal Castings

    B30 Standard Specification for Copper Alloys in Ingot Form

    B369 Standard Specification for Copper-Nickel Alloy Castings

    B427 Standard Specification for Gear Bronze Alloy Castings

    B505/B505M Standard Specification for Copper Alloy Continuous Castings

    B584 Standard Specification for Copper Alloy Sand Castings for General Applications

    B61 Standard Specification for Steam or Valve Bronze Castings

    B62 Standard Specification for Composition Bronze or Ounce Metal Castings

    B644 Standard Specification for Copper Alloy Addition Agents

    B66 Standard Specification for Bronze Castings for Steam Locomotive Wearing Parts

    B67 Standard Specification for Car and Tender Journal Bearings, Lined

    B763/B763M Standard Specification for Copper Alloy Sand Castings for Valve Applications

    B770 Standard Specification for Copper-Beryllium Alloy Sand Castings for General Applications

    B806 Standard Specification for Copper Alloy Permanent Mold Castings for General Applications

    B824 Standard Specification for General Requirements for Copper Alloy Castings


    B05.04 - Pipe and Tube

    B111/B111M Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock

    B135 Standard Specification for Seamless Brass Tube

    B135M Standard Specification for Seamless Brass Tube [Metric]

    B188 Standard Specification for Seamless Copper Bus Pipe and Tube

    B251 Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube

    B251M Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube [Metric]

    B280 Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service

    B302 Standard Specification for Threadless Copper Pipe, Standard Sizes

    B306 Standard Specification for Copper Drainage Tube (DWV)

    B315 Standard Specification for Seamless Copper Alloy Pipe and Tube

    B359/B359M Standard Specification for Copper and Copper-Alloy Seamless Condenser and Heat Exchanger Tubes With Integral Fins

    B360 Standard Specification for Hard-Drawn Copper Capillary Tube for Restrictor Applications

    B372 Standard Specification for Seamless Copper and Copper-Alloy Rectangular Waveguide Tube

    B395/B395M Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes

    B42 Standard Specification for Seamless Copper Pipe, Standard Sizes

    B43 Standard Specification for Seamless Red Brass Pipe, Standard Sizes

    B447 Standard Specification for Welded Copper Tube

    B466/B466M Standard Specification for Seamless Copper-Nickel Pipe and Tube

    B467 Standard Specification for Welded Copper-Nickel Pipe

    B543/B543M Standard Specification for Welded Copper and Copper-Alloy Heat Exchanger Tube

    B552 Standard Specification for Seamless and Welded Copper–Nickel Tubes for Water Desalting Plants

    B587 Standard Specification for Welded Brass Tube

    B608 Standard Specification for Welded Copper-Alloy Pipe

    B640 Standard Specification for Welded Copper Tube for Air Conditioning and Refrigeration Service

    B643 Standard Specification for Copper-Beryllium Alloy Seamless Tube

    B68/B68M Standard Specification for Seamless Copper Tube, Bright Annealed

    B687 Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples

    B698 Standard Classification for Seamless Copper and Copper Alloy Plumbing Pipe and Tube

    B706 Standard Specification for Seamless Copper Alloy (UNS No. C69100) Pipe and Tube

    B743 Standard Specification for Seamless Copper Tube in Coils

    B75/B75M Standard Specification for Seamless Copper Tube

    B813 Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube

    B819 Standard Specification for Seamless Copper Tube for Medical Gas Systems

    B828 Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings

    B837 Standard Specification for Seamless Copper Tube for Natural Gas and Liquefied Petroleum (LP) Gas Fuel Distribution Systems

    B88 Standard Specification for Seamless Copper Water Tube

    B88M Standard Specification for Seamless Copper Water Tube [Metric]

    B903 Standard Specification for Seamless Copper Heat Exchanger Tubes With Internal Enhancement

    B919 Standard Specification for Welded Copper Heat Exchanger Tubes With Internal Enhancement

    B937 Standard Specification for Copper-Beryllium Seamless Tube (UNS Nos. C17500 and C17510)

    B944 Standard Specification for Copper-Beryllium Welded Heat Exchanger and Condenser Tube (UNS No. C17510)

    B956/B956M Standard Specification for Welded Copper and Copper-Alloy Condenser and Heat Exchanger Tubes with Integral Fins


    B05.02 - Rod, Bar, Wire, Shapes and Forgings

    B124/B124M Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes

    B134/B134M Standard Specification for Brass Wire

    B138/B138M Standard Specification for Manganese Bronze Rod, Bar, and Shapes

    B139/B139M Standard Specification for Phosphor Bronze Rod, Bar, and Shapes

    B140/B140M Standard Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes

    B150/B150M Standard Specification for Aluminum Bronze Rod, Bar, and Shapes

    B151/B151M Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar

    B159/B159M Standard Specification for Phosphor Bronze Wire

    B16/B16M Standard Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines

    B187/B187M Standard Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and Shapes

    B196/B196M Standard Specification for Copper-Beryllium Alloy Rod and Bar

    B197/B197M Standard Specification for Copper-Beryllium Alloy Wire

    B206/B206M Standard Specification for Copper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy Wire

    B21/B21M Standard Specification for Naval Brass Rod, Bar, and Shapes

    B249/B249M Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings

    B250/B250M Standard Specification for General Requirements for Wrought Copper Alloy Wire

    B272 Standard Specification for Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip)

    B283/B283M Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)

    B301/B301M Standard Specification for Free-Cutting Copper Rod, Bar, Wire, and Shapes

    B371/B371M Standard Specification for Copper-Zinc-Silicon Alloy Rod

    B411/B411M Standard Specification for Copper-Nickel-Silicon Alloy Rod and Bar

    B441 Standard Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465)

    B453/B453M Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes

    B455 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes

    B570 Standard Specification for Copper-Beryllium Alloy (UNS Nos. C17000 and C17200) Forgings and Extrusions

    B870 Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions Alloys (UNS Nos. C17500 and C17510)

    B927/B927M Standard Specification for Brass Rod, Bar, and Shapes

    B929 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar

    B967/B967M Standard Specification for Copper-Zinc-Tin-Bismuth Alloy Rod, Bar and Wire

    B974/B974M Standard Specification for Free-Cutting Bismuth Brass Rod, Bar and Wire

    B98/B98M Standard Specification for Copper-Silicon Alloy Rod, Bar and Shapes

    B981/B981M Standard Specification for Low Leaded Brass Rod, Bar and Shapes

    B99/B99M Standard Specification for Copper-Silicon Alloy Wire for General Applications

    F68 Standard Specification for Oxygen-Free Copper in Wrought Forms for Electron Devices


    B05.01 - Plate, Sheet, and Strip

    B100 Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use

    B101 Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction

    B103/B103M Standard Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar

    B121/B121M Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar

    B122/B122M Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar

    B129 Standard Specification for Cartridge Brass Cartridge Case Cups

    B130 Standard Specification for Commercial Bronze Strip for Bullet Jackets

    B131 Standard Specification for Copper Alloy Bullet Jacket Cups

    B152/B152M Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar

    B169/B169M Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar

    B171/B171M Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers

    B19 Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks

    B194 Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar

    B248 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar

    B248M Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar (Metric)

    B36/B36M Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar

    B370 Standard Specification for Copper Sheet and Strip for Building Construction

    B422/B422M Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip

    B432 Standard Specification for Copper and Copper Alloy Clad Steel Plate

    B465 Standard Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar

    B506 Specification for Copper-Clad Stainless Steel Sheet and Strip for Building Construction

    B508 Standard Specification for Copper Alloy Strip for Flexible Metal Hose

    B534 Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar

    B569 Standard Specification for Brass Strip in Narrow Widths and Light Gage for Heat-Exchanger Tubing

    B591 Standard Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and Rolled Bar

    B592 Standard Specification for Copper-Zinc-Aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar

    B694 Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding

    B740 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Strip

    B747 Standard Specification for Copper-Zirconium Alloy Sheet and Strip

    B768 Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet

    B882 Specification for Pre-Patinated Copper for Architectural Applications

    B888/B888M Standard Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts

    B936 Standard Specification for Copper-Chromium-Iron-Titanium Alloy Plate, Sheet, Strip and Rolled Bar

    B96/B96M Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels


    B02.11 - Electrical Contact Test Methods

    B277 Standard Test Method for Hardness of Electrical Contact Materials

    B497 Standard Guide for Measuring Voltage Drop on Closed Arcing Contacts

    B539 Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)

    B615 Standard Practice for Measuring Electrical Contact Noise in Sliding Electrical Contacts

    B667 Standard Practice for Construction and Use of a Probe for Measuring Electrical Contact Resistance

    B735 Standard Test Method for Porosity in Gold Coatings on Metal Substrates by Nitric Acid Vapor

    B794 Standard Test Method for Durability Wear Testing of Separable Electrical Connector Systems Using Electrical Resistance Measurements

    B798 Standard Test Method for Porosity in Gold or Palladium Coatings on Metal Substrates by Gel-Bulk Electrography

    B799 Standard Test Method for Porosity in Gold and Palladium Coatings by Sulfurous Acid/Sulfur-Dioxide Vapor

    B808 Standard Test Method for Monitoring of Atmospheric Corrosion Chambers by Quartz Crystal Microbalances

    B810 Standard Test Method for Calibration of Atmospheric Corrosion Test Chambers by Change in Mass of Copper Coupons

    B812 Standard Test Method for Resistance to Environmental Degradation of Electrical Pressure Connections Involving Aluminum and Intended for Residential Applications

    B825 Standard Test Method for Coulometric Reduction of Surface Films on Metallic Test Samples

    B826 Standard Test Method for Monitoring Atmospheric Corrosion Tests by Electrical Resistance Probes

    B827 Standard Practice for Conducting Mixed Flowing Gas (MFG) Environmental Tests

    B845 Standard Guide for Mixed Flowing Gas (MFG) Tests for Electrical Contacts

    B854 Standard Guide for Measuring Electrical Contact Intermittences

    B868 Standard Practice for Contact Performance Classification of Electrical Connection Systems

    B878 Standard Test Method for Nanosecond Event Detection for Electrical Contacts and Connectors

    B885 Standard Test Method for Presence of Foreign Matter on Printed Wiring Board Contacts

    B896 Standard Test Methods for Evaluating Connectability Characteristics of Electrical Conductor Materials

    B913 Standard Test Method for Evaluation of Crimped Electrical Connections to 16-Gauge and Smaller Diameter Stranded and Solid Conductors

    B920 Standard Practice for Porosity in Gold and Palladium Alloy Coatings on Metal Substrates by Vapors of Sodium Hypochlorite Solution

    B942 Standard Guide for Specification and Quality Assurance for the Electrical Contact Performance of Crimped Wire Terminations


    B02.10 - Thermostat Metals and Electrical Resistance Heating Materials

    B106 Standard Test Methods for Flexivity of Thermostat Metals

    B114 Standard Test Method for Temperature-Resistance Constants of Sheet Materials for Shunts and Precision Resistors

    B223 Standard Test Method for Modulus of Elasticity of Thermostat Metals (Cantilever Beam Method)

    B267 Standard Specification for Wire for Use In Wire-Wound Resistors

    B344 Standard Specification for Drawn or Rolled Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating Elements

    B362 Standard Test Method for Mechanical Torque Rate of Spiral Coils of Thermostat Metal

    B388 Standard Specification for Thermostat Metal Sheet and Strip

    B389 Standard Test Method for Thermal Deflection Rate of Spiral and Helical Coils of Thermostat Metal

    B478 Standard Test Method for Cross Curvature of Thermostat Metals

    B603 Standard Specification for Drawn or Rolled Iron-Chromium-Aluminum Alloys for Electrical Heating Elements

    B63 Standard Test Method for Resistivity of Metallically Conducting Resistance and Contact Materials

    B70 Standard Test Method for Change of Resistance With Temperature of Metallic Materials for Electrical Heating

    B753 Standard Specification for Thermostat Component Alloys

    B76 Standard Test Method for Accelerated Life of Nickel-Chromium and Nickel-Chromium-Iron Alloys for Electrical Heating

    B77 Standard Test Method for Thermoelectric Power of Electrical-Resistance Alloys

    B78 Standard Test Method of Accelerated Life of Iron-Chromium-Aluminum Alloys for Electrical Heating

    B84 Standard Test Method for Temperature-Resistance Constants of Alloy Wires for Precision Resistors


    B02.07 - Refined Nickel and Cobalt and Their Alloys

    B127 Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip

    B160 Standard Specification for Nickel Rod and Bar

    B161 Standard Specification for Nickel Seamless Pipe and Tube

    B162 Standard Specification for Nickel Plate, Sheet, and Strip

    B163 Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes

    B164 Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire

    B165 Standard Specification for Nickel-Copper Alloy (UNS N04400) Seamless Pipe and Tube

    B166 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696),* Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Rod, Bar,

    B167 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696),* Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe an

    B168 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Plate, Sheet,

    B333 Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip

    B335 Standard Specification for Nickel-Molybdenum Alloy Rod

    B366 Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings

    B39 Standard Specification for Nickel

    B407 Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube

    B408 Standard Specification for Nickel-Iron-Chromium Alloy Rod and Bar

    B409 Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip

    B423 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825, N08221, and N06845) Seamless Pipe and Tube

    B424 Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825, UNS N08221, and UNS N06845) Plate, Sheet, and Strip

    B425 Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825, UNS N08221, and UNS N06845) Rod and Bar

    B434 Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, UNS N10242)* Plate, Sheet, and Strip

    B435 Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip

    B443 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy(UNS N06625) and Nickel-Chromium-Molybdenum-SiliconAlloy (UNS N06219) Plate, Sheet, and Strip

    B444 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube

    B446 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650) Rod and Bar

    B462 Standard Specification for Forged or Rolled UNS N06030, UNS N06022, UNS N06035, UNS N06200, UNS N06059, UNS N10362, UNS N06686, UNS N08020, UNS N08024, UNS N08026, UNS N08367, UNS N10276, UNS N10665, UNS N10675, UNS N10629, UNS N08031, UNS N06045,

    B463 Standard Specification for UNS N08020 Alloy Plate, Sheet, and Strip

    B464 Standard Specification for Welded UNS N08020 Alloy Pipe

    B468 Standard Specification for Welded UNS N08020 Alloy Tubes

    B472 Standard Specification for Nickel Alloy Billets and Bars for Reforging

    B473 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire

    B474 Standard Specification for Electric Fusion Welded Nickel and Nickel Alloy Pipe

    B475 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Round Weaving Wire

    B511 Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes

    B512 Standard Specification for Nickel-Chromium-Silicon Alloy (UNS N08330) Billets and Bars

    B514 Standard Specification for Welded Nickel-Iron-Chromium Alloy Pipe

    B515 Standard Specification for Welded UNS N08120, UNS N08800, UNS N08810, and UNS N08811 Alloy Tubes

    B516 Standard Specification for Welded Nickel-Chromium-Iron Alloy (UNS N06600, UNS N06601, UNS N06603, UNS N06025, UNS N06045, UNS N06690, and UNS N06693) Tubes

    B517 Standard Specification for Welded Nickel-Chromium-Iron-Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045) Pipe

    B535 Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and Tube

    B536 Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip

    B546 Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe

    B564 Standard Specification for Nickel Alloy Forgings

    B572 Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod

    B573 Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, N10242)* Rod

    B574 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten

    B575 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Tungsten, and Low-Carbon Nickel-Molybdenum-Chromium

    B581 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod

    B582 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip

    B599 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip

    B619 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe

    B620 Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Plate, Sheet, and Strip

    B621 Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod

    B622 Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube

    B625 Standard Specification for UNS N08925, UNS N08031, UNS N08932, UNS N08926, UNS N08354, UNS N08830, and UNS R20033 Plate, Sheet, and Strip

    B626 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube

    B637 Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service

    B639 Standard Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service

    B649 Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire

    B668 Standard Specification for UNS N08028 and N08029 Seamless Pipe and Tube

    B670 Standard Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service

    B672 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar and Wire

    B673 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe

    B674 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Tube

    B675 Standard Specification for UNS N08367 Welded Pipe

    B676 Standard Specification for UNS N08367 Welded Tube

    B677 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube

    B688 Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip

    B690 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube

    B691 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Rod, Bar, and Wire

    B704 Standard Specification for Welded UNS N06625, UNS N06219 and UNS N08825 Alloy Tubes

    B705 Standard Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe

    B709 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08028) Plate, Sheet, and Strip

    B710 Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Pipe

    B718 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip

    B719 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar

    B722 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube

    B723 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Pipe

    B725 Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Pipe

    B726 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube

    B729 Standard Specification for Seamless UNS N08020, UNS N08026, and UNS N08024 Nickel-Alloy Pipe and Tube

    B730 Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Tube

    B739 Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Tube

    B751 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Tube

    B755 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate, Sheet, and Strip

    B756 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06110) Rod and Bar

    B757 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe

    B758 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube

    B759 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Pipe and Tube

    B775 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe

    B804 Standard Specification for UNS N08367 and UNS N08926 Welded Pipe

    B805 Standard Specification for Precipitation Hardening Nickel Alloys Bar and Wire

    B814 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy (UNS N06920) Plate, Sheet, and Strip

    B815 Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod

    B818 Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Plate, Sheet and Strip

    B829 Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube

    B834 Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves, and Parts

    B865 Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock

    B872 Standard Specification for Precipitation-Hardening Nickel Alloys Plate, Sheet, and Strip

    B880 Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys

    B906 Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip

    B924 Standard Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger Tubes With Integral Fins

    B983 Standard Specification for Precipitation Hardened or Cold Worked, Seamless Nickel Alloy Pipe and Tube


    B02.05 - Precious Metals and Electrical Contact Materials

    B413 Standard Specification for Refined Silver

    B476 Standard Specification for General Requirements for Wrought Precious Metal Electrical Contact Materials

    B477 Standard Specification for Gold-Silver-Nickel Electrical Contact Alloy

    B522 Standard Specification for Gold-Silver-Platinum Electrical Contact Alloy

    B540 Standard Specification for Palladium Electrical Contact Alloy

    B541 Standard Specification for Gold Electrical Contact Alloy

    B561 Standard Specification for Refined  Platinum

    B562 Standard Specification for Refined Gold

    B563 Standard Specification for Palladium-Silver-Copper Electrical Contact Alloy

    B576 Standard Guide for Arc Erosion Testing of Electrical Contact Materials

    B589 Standard Specification for Refined Palladium

    B596 Standard Specification for Gold-Copper Alloy Electrical Contact Material

    B613 Standard Guide for Preparing Specifications for Miniature Brushes of Composite Materials for Sliding Electric Contacts

    B616 Standard Specification for Refined Rhodium

    B617 Standard Specification for Coin Silver Electrical Contact Alloy

    B628 Standard Specification for Silver-Copper Eutectic Electrical Contact Alloy

    B631 Standard Specification for Silver-Tungsten Electrical Contact Materials

    B662 Standard Specification for Silver-Molybdenum Electrical Contact Material

    B663 Standard Specification for Silver-Tungsten Carbide Electrical Contact Material

    B664 Standard Specification for 80 % Silver-20 % Graphite Sliding Contact Material

    B671 Standard Specification for Refined Iridium

    B683 Standard Specification for Pure Palladium Electrical Contact Material

    B684 Standard Specification for Platinum-Iridium Electrical Contact Materials

    B685 Standard Specification for Palladium-Copper Electrical Contact Material

    B692 Standard Specification for 75 % Silver-25 % % Graphite Sliding Contact Material

    B693 Standard Specification for Silver-Nickel Electrical Contact Materials

    B702 Standard Specification for Copper-Tungsten Electrical Contact Material

    B717 Standard Specification for Refined Ruthenium

    B731 Standard Specification for 60 % Palladium-40 % Silver Electrical Contact Material

    B742 Standard Specification for Fine Silver Electrical Contact Fabricated Material

    B772 Standard Guide for Specifying the Chemical Compositions for Electrical Contact Materials (Arcing and Nonarcing)

    B780 Standard Specification for 75% Silver, 24.5% Copper, 0.5% Nickel Electrical Contact Alloy

    B781 Standard Guide for Silver-Cadmium Oxide Contact Material

    B844 Standard Guide for Silver-Tin Oxide Contact Material


    B02.04 - Zinc and Cadmium

    B240 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings

    B275 Standard Practice for Codification of Certain Zinc, Tin and Lead Die Castings

    B327 Standard Specification for Master Alloys Used in Making Zinc Die Casting Alloys

    B418 Standard Specification for Cast and Wrought Galvanic Zinc Anodes

    B440 Standard Specification for Cadmium

    B6 Standard Specification for Zinc

    B69 Standard Specification for Rolled Zinc

    B750 Standard Specification for GALFAN (Zinc-5 % Aluminum-Mischmetal) Alloy in Ingot Form for Hot-Dip Coatings

    B792 Standard Specification for Zinc Alloys in Ingot Form for Slush Casting

    B793 Standard Specification for Zinc Casting Alloy Ingot for Sheet Metal Forming Dies and Plastic Injection Molds

    B833 Standard Specification for Zinc and Zinc Alloy Wire for Thermal Spraying (Metallizing) for the Corrosion Protection of Steel

    B852 Standard Specification for Continuous Galvanizing Grade (CGG) Zinc Alloys for Hot-Dip Galvanizing of Sheet Steel

    B86 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings

    B860 Standard Specification for Zinc Master Alloys for Use in Hot Dip Galvanizing

    B892 Standard Specification for ACuZinc5

    B894 Standard Specification for ACuZinc5

    B897 Standard Specification for Configuration of Zinc and Zinc Alloy Jumbo, Block, Half Block, and Slab Ingot

    B907 Standard Specification for Zinc, Tin and Cadmium Base Alloys Used as Solders

    B908 Standard Practice for the Use of Color Codes for Zinc Casting Alloy Ingot

    B914 Standard Practice for Color Codes on Zinc and Zinc Alloy Ingot for Use in Hot-Dip Galvanizing of Steel

    B943 Standard Specification for Zinc and Tin Alloy Wire Used in Thermal Spraying for Electronic Applications

    B949 Standard Specification for General Requirements for Zinc and Zinc Alloy Products

    B952/B952M Standard Specification for Zinc Alloys in Ingot Form for Spin Casting

    B960 Standard Specification for Prime Western Grade-Recycled (PWG-R) Zinc

    B989 Standard Specification for High Fluidity (HF) Zinc-Aluminum Alloy in Ingot Form for Thin Wall Die Castings


    B02.02 - Refined Lead, Tin, Antimony, and Their Alloys

    B23 Standard Specification for White Metal Bearing Alloys (Known Commercially as “Babbitt Metal”)

    B237 Standard Specification for Refined Antimony

    B29 Standard Specification for Refined Lead

    B32 Standard Specification for Solder Metal

    B339 Standard Specification for Pig Tin

    B560 Standard Specification for Modern Pewter Alloys

    B749 Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products

    B774 Standard Specification for Low Melting Point Alloys

    B982 Standard Specification for Sampling and Sample Preparation of Lead and Lead Alloys for Optical Emission Spectrometric or ICP Analysis


    B01.07 - Conductors of Light Metals

    B230/B230M Standard Specification for Aluminum 1350–H19 Wire for Electrical Purposes

    B231/B231M Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors

    B232/B232M Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)

    B233 Standard Specification for Aluminum 1350 Drawing Stock for Electrical Purposes

    B324 Standard Specification for Aluminum Rectangular and Square Wire for Electrical Purposes

    B398/B398M Standard Specification for Aluminum-Alloy 6201-T81 and 6201-T83 Wire for Electrical Purposes

    B399/B399M Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors

    B400/B400M Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors

    B401 Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/COMP)

    B524/B524M Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Alloy Reinforced (ACAR, 1350/6201)

    B549 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Aluminum-Clad Steel Reinforced for Use in Overhead Electrical Conductors

    B609/B609M Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes

    B701/B701M Standard Specification for Concentric-Lay-Stranded Self-Damping Aluminum Conductors, Steel Reinforced (ACSR/SD)

    B711 Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy Conductors, Steel Reinforced (AACSR) (6201)

    B778 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors (AAC/TW)

    B779 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Steel-Reinforced (ACSR/TW)

    B786/B786M Standard Specification for 19 Wire Combination Unilay-Stranded Aluminum Conductors for Subsequent Insulation

    B800 Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes - Annealed and Intermediate Tempers

    B801 Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation

    B836 Standard Specification for Compact Round Stranded Aluminum Conductors Using Single Input Wire Construction

    B856 Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated Steel Supported (ACSS)

    B857 Standard Specification for Shaped Wire Compact Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Supported (ACSS/TW)

    B901 Standard Specification for Compressed Round Stranded Aluminum Conductors Using Single Input Wire Construction

    B911/B911M Standard Specification for ACSR Twisted Pair Conductor (ACSR/TP)

    B941 Standard Specification for Heat Resistant Aluminum-Zirconium Alloy Wire for Electrical Purposes

    B976 Standard Specification for Fiber Reinforced Aluminum Matrix Composite (AMC) Core Wire for Aluminum Conductors, Composite Reinforced (ACCR)

    B978/B978M Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Composite Reinforced (ACCR)

    B987/B987M Standard Specification for Carbon Fiber Composite Core (CFCC/TS) for use in Overhead Electrical Conductors


    B01.06 - Bi-Metallic Conductors

    B227 Standard Specification for Hard-Drawn Copper-Clad Steel Wire

    B228 Standard Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors

    B229 Standard Specification for Concentric-Lay-Stranded Copper and Copper-Clad Steel Composite Conductors

    B415 Standard Specification for Hard-Drawn Aluminum-Clad Steel Wire

    B416 Standard Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors

    B452 Standard Specification for Copper-Clad Steel Wire for Electronic Application

    B501 Standard Specification for Silver-Coated, Copper-Clad Steel Wire for Electronic Application

    B502/B502M Standard Specification for Aluminum-Clad Steel Core Wire for Use in Overhead Electrical Aluminum Conductors

    B520 Standard Specification for Tin-Coated, Copper-Clad Steel Wire for Electronic Application

    B559 Standard Specification for Nickel-Coated, Copper-Clad Steel Wire for Electronic Application

    B566 Standard Specification for Copper-Clad Aluminum Wire

    B869 Standard Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire

    B910/B910M Standard Specification for Annealed Copper-Clad Steel Wire


    B01.05 - Conductors of Ferrous Metals

    B498/B498M Standard Specification for Zinc-Coated (Galvanized) Steel Core Wire for Use in Overhead Electrical Conductors

    B500/B500M Standard Specification for Metallic Coated or Aluminum Clad Stranded Steel Core for Use in Overhead Electrical Conductors

    B606/B606M Standard Specification for High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Aluminum and Aluminum-Alloy Conductors, Steel Reinforced

    B802/B802M Standard Specification for Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Aluminum Conductors, Steel Reinforced (ACSR)

    B803/B803M Standard Specification for High-Strength Zinc-5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors

    B957/B957M Standard Specification for Extra-High-Strength and Ultra-High-Strength Zinc-Coated (Galvanized) Steel Core Wire for Overhead Electrical Conductors

    B958/B958M Standard Specification for Extra-High-Strength and Ultra-High-Strength Class A Zinc–5% Aluminum-Mischmetal Alloy-Coated Steel Core Wire for Use in Overhead Electrical Conductors


    B01.04 - Conductors of Copper and Copper Alloys

    B1 Standard Specification for Hard-Drawn Copper Wire

    B116 Standard Specification for Figure-9 Deep-Grooved and Figure-8 Copper Trolly Wire for Industrial Haulage

    B172 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors

    B173 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors

    B174 Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors

    B189 Standard Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes

    B2 Standard Specification for Medium-Hard-Drawn Copper Wire

    B226 Standard Specification for Cored, Annular, Concentric-Lay-Stranded Copper Conductors

    B246 Standard Specification for Tinned Hard-Drawn and Medium-Hard-Drawn Copper Wire for Electrical Purposes

    B286 Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment

    B298 Standard Specification for Silver-Coated Soft or Annealed Copper Wire

    B3 Standard Specification for Soft or Annealed Copper Wire

    B33 Standard Specification for Tin-Coated Soft or Annealed Copper Wire for Electrical Purposes

    B355 Standard Specification for Nickel-Coated Soft or Annealed Copper Wire

    B47 Standard Specification for Copper Trolley Wire

    B470 Standard Specification for Bonded Copper Conductors for Use in Hookup Wires for Electronic Equipment

    B48 Standard Specification for Soft Rectangular and Square Bare Copper Wire for Electrical Conductors

    B496 Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors

    B624 Standard Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application

    B738 Standard Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors

    B784 Standard Specification for Modified Concentric-Lay-Stranded Copper Conductors for Use in Insulated Electrical Cables

    B787/B787M Standard Specification for 19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent Insulation

    B8 Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft

    B835 Standard Specification for Compact Round Stranded Copper Conductors Using Single Input Wire Construction

    B9 Standard Specification for Bronze Trolley Wire

    B902/B902M Standard Specification for Compressed Round Stranded Copper Conductors, Hard, Medium-Hard, or Soft Using Single Input Wire Construction

    B965 Standard Specification for High Performance Tin-Coated Annealed Copper Wire Intended for Electrical and Electronic Application for Solderability

    B971 Standard Specification for Silver-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application

    B972 Standard Specification for Nickel-Coated Braid and Ribbon Flat Copper Wire Intended for use in Electronic Application

    B973 Standard Specification for Tin-Coated Braid and Ribbon Flat Copper Wire intended for use in Electronic Application


    B01.02 - Methods of Test and Sampling Procedure

    B105 Standard Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors

    B193 Standard Test Method for Resistivity of Electrical Conductor Materials

    B258 Standard Specification for Standard Nominal Diameters and Cross-Sectional Areas of AWG Sizes of Solid Round Wires Used as Electrical Conductors

    B263/B263M Standard Test Method for Determination of Cross-Sectional Area of Stranded Conductors

    B279 Standard Test Method for Stiffness of Bare Soft Square and Rectangular Copper and Aluminum Wire for Magnet Wire Fabrication

    B682 Standard Specification for Standard Metric Sizes of Electrical Conductors

    B830 Standard Specification for Uniform Test Methods and Frequency

    B961 Standard Specification for Silver Coated Copper and Copper Alloy Stranded Conductors for Electronic Space Application

    B979 Standard Specification for Non-Specular (NS) Surface Finish on Overhead Aluminum Electrical Conductors

    B986 Standard Test Method for Determination of Tensile Strength by Mass Method for Stranded Conductors Intended for use in Electronic Application


    A06.02 - Material Specifications

    A1009 Standard Specification for Soft Magnetic MnZn Ferrite Core Materials for High Frequency (10 kHz-1 MHz) Power Transformer and Filter Inductor Applications

    A1054 Standard Specification for Sintered Ceramic Ferrite Permanent Magnets

    A1086 Standard Specification for Thin-Gauge Nonoriented Electrical Steel Fully Processed Types

    A345 Standard Specification for Flat-Rolled Electrical Steels for Magnetic Applications

    A664 Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications

    A677 Standard Specification for Nonoriented Electrical Steel Fully Processed Types

    A683 Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types

    A726 Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types

    A753 Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)

    A801 Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650)

    A811 Standard Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy Techniques

    A838 Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications

    A839 Standard Specification for Iron-Phosphorus Powder Metallurgy Parts for Soft Magnetic Applications

    A848 Standard Specification for Low-Carbon Magnetic Iron

    A867 Standard Specification for Iron-Silicon Relay Steels

    A876 Standard Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types

    A901 Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types

    A904 Standard Specification for 50 Nickel-50 Iron Powder Metallurgy Soft Magnetic Parts

    A976 Standard Classification of Insulating Coatings for Electrical Steels by Composition, Relative Insulating Ability and Application


    A06.01 - Test Methods

    A1013 Standard Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method

    A1036 Standard Guide for Measuring Power Frequency Magnetic Properties of Flat-Rolled Electrical Steels Using Small Single Sheet Testers

    A1071/A1071M Standard Test Method for Evaluating Hygrothermal Corrosion Resistance of Permanent Magnet Alloys

    A34/A34M Standard Practice for Sampling and Procurement Testing of Magnetic Materials

    A341/A341M Standard Test Method for Direct Current Magnetic Properties of Materials Using D-C Permeameters and the Ballistic Test Methods

    A342/A342M Standard Test Methods for Permeability of Weakly Magnetic Materials

    A343/A343M Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame

    A348/A348M Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame

    A596/A596M Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Ballistic Method and Ring Specimens

    A598/A598M Standard Test Method for Magnetic Properties of Magnetic Amplifier Cores

    A697/A697M Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods

    A698/A698M Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields

    A712 Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys

    A717/A717M Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens

    A719/A719M Standard Test Method for Lamination Factor of Magnetic Materials

    A720/A720M Standard Test Method for Ductility of Nonoriented Electrical Steel

    A721/A721M Standard Test Method for Ductility of Oriented Electrical Steel

    A772/A772M Standard Test Method for AC Magnetic Permeability of Materials Using Sinusoidal Current

    A773/A773M Standard Test Method for Direct Current Magnetic Properties of Low Coercivity Magnetic Materials Using Hysteresigraphs

    A804/A804M Standard Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens

    A889/A889M Standard Test Method for Alternating-Current Magnetic Properties of Materials at Low Magnetic Flux Density Using the Voltmeter-Ammeter-Wattmeter-Varmeter Method and 25-cm Epstein Frame

    A893/A893M Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies

    A894/A894M Standard Test Method for Saturation Magnetization or Induction of Nonmetallic Magnetic Materials

    A900/A900M Standard Test Method for Lamination Factor of Amorphous Magnetic Strip

    A912/A912M Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens

    A927/A927M Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method

    A932/A932M Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens

    A937/A937M Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces

    A971/A971M Standard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils

    A977/A977M Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs


    A05.17 - Corrugated Steel Pipe Specifications

    A1042/A1042M Standard Specification for Composite Corrugated Steel Pipe for Sewers and Drains

    A742/A742M Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe

    A760/A760M Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains

    A761/A761M Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches

    A762/A762M Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains

    A796/A796M Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications

    A798/A798M Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications

    A807/A807M Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications

    A849 Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe

    A862/A862M Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe

    A926 Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe

    A930 Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits

    A964/A964M Standard Specification for Corrugated Steel Box Culverts

    A978/A978M Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications

    A979/A979M Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field

    A998/A998M Standard Practice for Structural Design of Reinforcements for Fittings in Factory–Made Corrugated Steel Pipe for Sewers and Other Applications


    A05.13 - Structural Shapes and Hardware Specifications

    A1059/A1059M Standard Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products

    A1068 Standard Practice for Life-Cycle Cost Analysis of Corrosion Protection Systems on Iron and Steel Products

    A1072/A1072M Standard Specification for Zinc-5 % Aluminum (Hot-Dip) Coatings on Iron and Steel Products

    A1074 Standard Specification for Hot Tin and Hot Tin/Lead Dip on Ferrous and Non-Ferrous Metals

    A123/A123M Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products

    A143/A143M Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement

    A153/A153M Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware

    A384/A384M Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies

    A385/A385M Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)

    A780/A780M Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings

    A896/A896M Standard Practice for Conducting Case Studies on Galvanized Structures


    A05.12 - Wire Specifications

    A111 Standard Specification for Zinc-Coated (Galvanized) “Iron” Telephone and Telegraph Line Wire

    A116 Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric

    A121 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire

    A363 Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand

    A390 Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)

    A411 Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire

    A460 Standard Specification for Copper-Clad Steel Wire Strand

    A474 Standard Specification for Aluminum-Coated Steel Wire Strand

    A475 Standard Specification for Zinc-Coated Steel Wire Strand

    A586 Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand

    A603 Standard Specification for Zinc-Coated Steel Structural Wire Rope

    A640 Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable

    A641/A641M Standard Specification for Zinc–Coated (Galvanized) Carbon Steel Wire

    A740 Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)

    A741 Standard Specification for Metallic-Coated Steel Wire Rope and Fittings for Highway Guardrail

    A764 Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs

    A809 Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire

    A810 Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh

    A817 Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire

    A818 Standard Specification for Coppered Carbon Steel Wire

    A854/A854M Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire

    A855/A855M Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Wire Strand

    A856/A856M Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire

    A925 Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand

    A974 Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated)

    A975 Standard Specification for Double–Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)


    A05.11 - Sheet Specifications

    A1003/A1003M Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members

    A1004/A1004M Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members

    A1046/A1046M Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process

    A1057/A1057M Standard Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process

    A1063/A1063M Standard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process

    A1079 Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process

    A308/A308M Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process

    A459 Standard Specification for Zinc-Coated Flat Steel Armoring Tape

    A463/A463M Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process

    A653/A653M Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process

    A755/A755M Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products

    A792/A792M Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process

    A875/A875M Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process

    A879/A879M Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface

    A917 Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)

    A918 Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface

    A924/A924M Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process

    A929/A929M Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe


    A05.07 - Methods of Testing

    A1030/A1030M Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products

    A1073/A1073M Standard Practice for Using Hand Micrometers to Measure the Thickness of Nonmetallic and Metallic-Coated Steel Sheet

    A1087/A1087M Standard Practice for Using Hand Calipers to Measure the Width of Steel Sheet

    A239 Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles,

    A309 Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test

    A428/A428M Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles

    A754/A754M Standard Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence

    A90/A90M Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings


    A04.21 - Testing

    A247 Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings

    A327/A327M Standard Test Methods for Impact Testing of Cast Irons

    A367 Standard Test Methods of Chill Testing of Cast Iron


    A04.02 - Malleable and Ductile Iron Castings

    A197/A197M Standard Specification for Cupola Malleable Iron

    A220/A220M Standard Specification for Pearlitic Malleable Iron

    A338 Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy Duty Service at Temperatures Up to 650°F (345°C)

    A395/A395M Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures

    A439 Standard Specification for Austenitic Ductile Iron Castings

    A47/A47M Standard Specification for Ferritic Malleable Iron Castings

    A476/A476M Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls

    A536 Standard Specification for Ductile Iron Castings

    A571/A571M Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service

    A602 Standard Specification for Automotive Malleable Iron Castings

    A842 Standard Specification for Compacted Graphite Iron Castings

    A874/A874M Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service

    A897/A897M Standard Specification for Austempered Ductile Iron Castings


    A04.01 - Grey and White Iron Castings

    A126 Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings

    A159 Standard Specification for Automotive Gray Iron Castings

    A278/A278M Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F (350°C)

    A319 Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure Containing Parts

    A436 Standard Specification for Austenitic Gray Iron Castings

    A48/A48M Standard Specification for Gray Iron Castings

    A518/A518M Standard Specification for Corrosion-Resistant High-Silicon Iron Castings

    A532/A532M Standard Specification for Abrasion-Resistant Cast Irons

    A667/A667M Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders

    A748/A748M Standard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use

    A823 Standard Specification for Statically Cast Permanent Mold Gray Iron Castings

    A834 Standard Specification for Common Requirements for Iron Castings for General Industrial Use

    A942/A942M Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion-Resistant Roll Shells


    A01.94 - U.S. Government Requirements for Steel Mill and Foundry Products

    A700 Standard Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment


    A01.92 - Terminology

    A941 Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys


    A01.91 - Editorial

    A994 Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys

    E527 Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)


    A01.29 - Tool Steels

    A561 Standard Practice for Macroetch Testing of Tool Steel Bars

    A597/A597M Standard Specification for Cast Tool Steel

    A600 Standard Specification for Tool Steel High Speed

    A681 Standard Specification for Tool Steels Alloy

    A686 Standard Specification for Tool Steel, Carbon


    A01.28 - Bearing Steels

    A1089/A1089M Standard Specification for Highly Loaded Anti-Friction Bearing Steel

    A295/A295M Standard Specification for High-Carbon Anti-Friction Bearing Steel

    A485 Standard Specification for High Hardenability Antifriction Bearing Steel

    A534 Standard Specification for Carburizing Steels for Anti-Friction Bearings

    A756 Standard Specification for Stainless Anti-Friction Bearing Steel

    A866 Standard Specification for Medium Carbon Anti-Friction Bearing Steel

    A892 Standard Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels

    E588 Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method


    A01.27 - Steel Chain

    A391/A391M Standard Specification for Grade 80 Alloy Steel Chain

    A413/A413M Standard Specification for Carbon Steel Chain

    A466/A466M Standard Specification for Weldless Chain

    A467/A467M Standard Specification for Machine and Coil Chain

    A906/A906M Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting

    A952/A952M Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links

    A973/A973M Standard Specification for Grade 100 Alloy Steel Chain


    A01.19 - Steel Sheet and Strip

    A1008/A1008M Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable

    A1011/A1011M Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength

    A1018/A1018M Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength

    A1031/A1031M Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled

    A1039/A1039M Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, Produced by Twin-Roll Casting Process

    A1083/A1083M Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, Produced by Twin-Roll Casting Process

    A1088 Standard Specification for Steel, Sheet, Cold-Rolled, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP)

    A109/A109M Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled

    A414/A414M Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels

    A424/A424M Standard Specification for Steel, Sheet, for Porcelain Enameling

    A505 Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

    A506 Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled

    A507 Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled

    A568/A568M Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

    A606/A606M Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance

    A635/A635M Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for

    A659/A659M Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled

    A684/A684M Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled

    A749/A749M Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for

    A794/A794M Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled

    A805/A805M Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled

    A980/A980M Standard Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled

    F1267 Standard Specification for Metal, Expanded, Steel


    A01.18 - Castings

    A100 Standard Specification for Ferrosilicon

    A1001 Standard Specification for High Strength Steel Castings in Heavy Sections

    A1002 Standard Specification for Castings, Nickel-Aluminum Ordered Alloy

    A101 Standard Specification for Ferrochromium

    A102 Standard Specification for Ferrovanadium

    A1025/A1025M Standard Specification for Ferroalloys, General Requirements

    A1062 Standard Specification for Steel Castings Sampling

    A1067/A1067M Standard Specification for Test Coupons for Steel Castings

    A1080 Standard Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings

    A128/A128M Standard Specification for Steel Castings, Austenitic Manganese

    A132 Standard Specification for Ferromolybdenum

    A144 Standard Specification for Ferrotungsten

    A146 Standard Specification for Molybdenum Oxide Products

    A148/A148M Standard Specification for Steel Castings, High Strength, for Structural Purposes

    A216/A216M Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service

    A217/A217M Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service

    A27/A27M Standard Specification for Steel Castings, Carbon, for General Application

    A297/A297M Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application

    A323 Standard Specification for Ferroboron

    A324 Standard Specification for Ferrotitanium

    A351/A351M Standard Specification for Castings, Austenitic, for Pressure-Containing Parts

    A352/A352M Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service

    A356/A356M Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines

    A389/A389M Standard Specification for Steel Castings, Alloy, Specially Heat-Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service

    A426/A426M Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service

    A447/A447M Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service

    A451/A451M Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service

    A481 Standard Specification for Chromium Metal

    A482/A482M Standard Specification for Ferrochrome-Silicon

    A483/A483M Standard Specification for Silicomanganese

    A487/A487M Standard Specification for Steel Castings Suitable for Pressure Service

    A488/A488M Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel

    A494/A494M Standard Specification for Castings, Nickel and Nickel Alloy

    A495 Standard Specification for Calcium-Silicon Alloys

    A550 Standard Specification for Ferrocolumbium

    A560/A560M Standard Specification for Castings, Chromium-Nickel Alloy

    A601/A601M Standard Specification for Electrolytic Manganese Metal

    A608/A608M Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures

    A609/A609M Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof

    A610 Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size

    A636 Standard Specification for Nickel Oxide Sinter

    A660/A660M Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service

    A701/A701M Standard Specification for Ferromanganese-Silicon

    A703/A703M Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts

    A732/A732M Standard Specification for Castings, Investment, Carbon and Low Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures

    A743/A743M Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application

    A744/A744M Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service

    A747/A747M Standard Specification for Steel Castings, Stainless, Precipitation Hardening

    A757/A757M Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service

    A781/A781M Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use

    A799/A799M Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content

    A800/A800M Standard Practice for Steel Casting, Austenitic Alloy, Estimating Ferrite Content Thereof

    A802 Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination

    A835/A835M Standard Specification for Sizes of Ferroalloys and Alloy Additives

    A872/A872M Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments

    A890/A890M Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application

    A903/A903M Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection

    A915/A915M Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades

    A922 Standard Specification for Silicon Metal

    A957/A957M Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use

    A958/A958M Standard Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades

    A985/A985M Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts

    A99 Standard Specification for Ferromanganese

    A990/A990M Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure Retaining Parts for Corrosive Service

    A995/A995M Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts

    A997 Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination


    A01.17 - Flat-Rolled and Wrought Stainless Steel

    A1010/A1010M Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet, and Strip

    A1028 Standard Specification for Stainless Steel Bars for Compressor and Turbine Airfoils

    A1069/A1069M Standard Specification for Laser-Fused Stainless Steel Bars, Plates, and Shapes

    A240/A240M Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications

    A276/A276M Standard Specification for Stainless Steel Bars and Shapes

    A313/A313M Standard Specification for Stainless Steel Spring Wire

    A314 Standard Specification for Stainless Steel Billets and Bars for Forging

    A368 Standard Specification for Stainless Steel Wire Strand

    A478 Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire

    A479/A479M Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

    A480/A480M Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

    A484/A484M Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings

    A492 Standard Specification for Stainless Steel Rope Wire

    A493 Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging

    A555/A555M Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods

    A564/A564M Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes

    A565/A565M Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service

    A580/A580M Standard Specification for Stainless Steel Wire

    A581/A581M Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods

    A582/A582M Standard Specification for Free-Machining Stainless Steel Bars

    A638/A638M Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service

    A666 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar

    A693 Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

    A705/A705M Standard Specification for Age-Hardening Stainless Steel Forgings

    A793 Standard Specification for Rolled Floor Plate, Stainless Steel

    A887 Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application

    A895 Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip

    A947M Standard Specification for Textured Stainless Steel Sheet [Metric]

    A959 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels

    A968/A968M Standard Specification for Chromium, Chromium-Nickel, and Silicon Alloy Steel Bars and Shapes for Corrosion and Heat-Resisting Service


    A01.15 - Bars

    A1040 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels

    A1075 Standard Specification for Flanged Steel U-Channel Posts

    A108 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished

    A125 Standard Specification for Steel Springs, Helical, Heat-Treated

    A255 Standard Test Methods for Determining Hardenability of Steel

    A29/A29M Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought

    A304 Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements

    A311/A311M Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements

    A322 Standard Specification for Steel Bars, Alloy, Standard Grades

    A355 Standard Specification for Steel Bars, Alloys, for Nitriding

    A400 Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties

    A434 Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered

    A499 Standard Specification for Steel Bars and Shapes, Carbon Rolled from “T” Rails

    A575 Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades

    A576 Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality

    A663/A663M Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties

    A675/A675M Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties

    A689 Standard Specification for Carbon and Alloy Steel Bars for Springs

    A696 Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components

    A702 Standard Specification for Steel Fence Posts, Hot Wrought

    A739 Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both

    A914/A914M Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements

    A920/A920M Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties

    A921/A921M Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging

    E618 Standard Test Method for Evaluating Machining Performance of Ferrous Metals Using an Automatic Screw/Bar Machine


    A01.14 - Methods of Corrosion Testing

    A1084 Standard Test Method for Detecting Detrimental Phases in Lean Duplex Austenitic/Ferritic Stainless Steels

    A262 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels

    A380/A380M Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems

    A763 Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels

    A923 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels

    A967/A967M Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts


    A01.13 - Mechanical and Chemical Testing and Processing Methods of Steel Products and Processes

    A1033 Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations

    A1058 Standard Test Methods for Mechanical Testing of Steel Products—Metric

    A370 Standard Test Methods and Definitions for Mechanical Testing of Steel Products

    A751 Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products

    A991/A991M Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products


    A01.11 - Steel Plates for Boilers and Pressure Vessels

    A1017/A1017M Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten

    A20/A20M Standard Specification for General Requirements for Steel Plates for Pressure Vessels

    A203/A203M Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel

    A204/A204M Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum

    A225/A225M Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel

    A263 Standard Specification for Stainless Chromium Steel-Clad Plate

    A264 Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate

    A265 Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate

    A285/A285M Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength

    A299/A299M Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon

    A302/A302M Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel

    A353/A353M Standard Specification for Pressure Vessel Plates, Alloy Steel, Double-Normalized and Tempered 9% Nickel

    A387/A387M Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum

    A435/A435M Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates

    A455/A455M Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese

    A515/A515M Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service

    A516/A516M Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service

    A517/A517M Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered

    A533/A533M Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel

    A537/A537M Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel

    A542/A542M Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium

    A543/A543M Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum

    A553/A553M Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 7, 8, and 9 % Nickel

    A562/A562M Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings

    A577/A577M Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates

    A578/A578M Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications

    A612/A612M Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service

    A645/A645M Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated

    A662/A662M Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service

    A724/A724M Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Pressure Vessels

    A734/A734M Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered

    A735/A735M Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service

    A736/A736M Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Steel

    A737/A737M Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel

    A738/A738M Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service

    A770/A770M Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications

    A832/A832M Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium

    A841/A841M Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP)

    A844/A844M Standard Specification for Steel Plates, 9 % Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process


    A01.10 - Stainless and Alloy Steel Tubular Products

    A1012 Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins

    A1015 Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications

    A1016/A1016M Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes

    A1047/A1047M Standard Test Method for Pneumatic Leak Testing of Tubing

    A1053/A1053M Standard Specification for Welded Ferritic-Martensitic Stainless Steel Pipe

    A209/A209M Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes

    A213/A213M Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes

    A249/A249M Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes

    A250/A250M Standard Specification for Electric-Resistance-Welded Ferritic Alloy-Steel Boiler and Superheater Tubes

    A268/A268M Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service

    A269/A269M Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service

    A270/A270M Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing

    A312/A312M Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes

    A333/A333M Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness

    A334/A334M Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service

    A335/A335M Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service

    A358/A358M Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications

    A369/A369M Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service

    A376/A376M Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service

    A409/A409M Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service

    A511/A511M Standard Specification for Seamless Stainless Steel Mechanical Tubing

    A554 Standard Specification for Welded Stainless Steel Mechanical Tubing

    A632 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service

    A688/A688M Standard Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes

    A778 Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products

    A789/A789M Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service

    A790/A790M Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe

    A803/A803M Standard Specification for Seamless and Welded Ferritic Stainless Steel Feedwater Heater Tubes

    A813/A813M Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe

    A814/A814M Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe

    A908 Standard Specification for Stainless Steel Needle Tubing

    A928/A928M Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal

    A943/A943M Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes

    A949/A949M Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe

    A999/A999M Standard Specification for General Requirements for Alloy and Stainless Steel Pipe


    A01.09 - Carbon Steel Tubular Products

    A1020/A1020M Standard Specification for Steel Tubes, Carbon and Carbon Manganese, Fusion Welded, for Boiler, Superheater, Heat Exchanger and Condenser Applications

    A1024/A1024M Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless

    A1037/A1037M Standard Specification for Steel Line Pipe, Black, Furnace-Butt-Welded

    A106/A106M Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service

    A1065/A1065M Standard Specification for Cold-Formed Electric-Fusion (Arc) Welded High-Strength Low–Alloy Structural Tubing in Shapes, with 50 ksi [345 MPa] Minimum Yield Point

    A1076/A1076M Standard Specification for Cold Formed Carbon Structural Steel Tubing Made from Metallic Precoated Sheet Steel

    A1085 Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)

    A134 Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)

    A135/A135M Standard Specification for Electric-Resistance-Welded Steel Pipe

    A139/A139M Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)

    A178/A178M Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes

    A179/A179M Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes

    A192/A192M Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service

    A210/A210M Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes

    A214/A214M Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes

    A252 Standard Specification for Welded and Seamless Steel Pipe Piles

    A254/A254M Standard Specification for Copper-Brazed Steel Tubing

    A381 Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems

    A423/A423M Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes

    A450/A450M Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes

    A498/A498M Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins

    A500/A500M Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes

    A501/A501M Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing

    A512 Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing

    A513/A513M Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing

    A519 Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing

    A523 Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits

    A524 Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures

    A53/A53M Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless

    A530/A530M Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe

    A556/A556M Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes

    A587 Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry

    A589/A589M Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe

    A595/A595M Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use

    A618/A618M Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing

    A671/A671M Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures

    A672/A672M Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures

    A691/A691M Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures

    A733 Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples

    A787/A787M Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing

    A795/A795M Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use

    A822/A822M Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service

    A847/A847M Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance

    A865/A865M Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints

    A972/A972M Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles


    A01.06 - Steel Forgings and Billets

    A1021/A1021M Standard Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service

    A1038 Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method

    A1048/A1048M Standard Specification for Pressure Vessel Forgings, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten for Elevated Temperature Service

    A1049/A1049M Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components

    A1090/A1090M Standard Specification for Forged Rings and Hollows Produced from Steels with Atmospheric Corrosion Resistance

    A266/A266M Standard Specification for Carbon Steel Forgings for Pressure Vessel Components

    A275/A275M Standard Practice for Magnetic Particle Examination of Steel Forgings

    A288 Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators

    A289/A289M Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators

    A290/A290M Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears

    A291/A291M Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears

    A336/A336M Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts

    A372/A372M Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels

    A388/A388M Standard Practice for Ultrasonic Examination of Steel Forgings

    A418/A418M Standard Practice for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings

    A427/A427M Standard Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction

    A456/A456M Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings

    A469/A469M Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors

    A470/A470M Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts

    A471/A471M Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels

    A472/A472M Standard Specification for Heat Stability of Steam Turbine Shafts and Rotor Forgings

    A473 Standard Specification for Stainless Steel Forgings

    A503/A503M Standard Specification for Ultrasonic Examination of Forged Crankshafts

    A504/A504M Standard Specification for Wrought Carbon Steel Wheels

    A508/A508M Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels

    A521/A521M Standard Specification for Steel, Closed-Impression Die Forgings for General Industrial Use

    A531/A531M Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings

    A541/A541M Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components

    A551/A551M Standard Specification for Carbon Steel Tires for Railway and Rapid Transit Applications

    A579/A579M Standard Specification for Superstrength Alloy Steel Forgings

    A592/A592M Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Parts for Pressure Vessels

    A604/A604M Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets

    A646/A646M Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings

    A649/A649M Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery

    A668/A668M Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use

    A711/A711M Standard Specification for Steel Forging Stock

    A723/A723M Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application

    A729/A729M Standard Specification for Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service

    A745/A745M Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings

    A765/A765M Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements

    A768/A768M Standard Specification for Vacuum-Treated 12 % Chromium Alloy Steel Forgings for Turbine Rotors and Shafts

    A788/A788M Standard Specification for Steel Forgings, General Requirements

    A833 Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers

    A837/A837M Standard Specification for Steel Forgings, Alloy, for Carburizing Applications

    A859/A859M Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components

    A891/A891M Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels

    A909/A909M Standard Specification for Steel Forgings, Microalloy, for General Industrial Use

    A939/A939M Standard Practice for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings

    A940/A940M Standard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors

    A956 Standard Test Method for Leeb Hardness Testing of Steel Products

    A965/A965M Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts

    A966/A966M Standard Practice for Magnetic Particle Examination of Steel Forgings Using Alternating Current

    A982/A982M Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils

    A983/A983M Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines

    A986/A986M Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings


    A01.05 - Steel Reinforcement

    A1022/A1022M Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement

    A1032 Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard Drawn Used for Prestressing Concrete Pipe

    A1034/A1034M Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars

    A1035/A1035M Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement

    A1044/A1044M Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete

    A1055/A1055M Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars

    A1060/A1060M Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete

    A1061/A1061M Standard Test Methods for Testing Multi-Wire Steel Strand

    A1064/A1064M Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete

    A1078/A1078M Standard Specification for Epoxy-Coated Steel Dowels for Concrete Pavement

    A1081/A1081M Standard Test Method for Evaluating Bond of Seven-Wire Steel Prestressing Strand

    A1094/A1094M Standard Specification for Continuous Hot-Dip Galvanized Steel Bars for Concrete Reinforcement

    A184/A184M Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement

    A416/A416M Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete

    A421/A421M Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete

    A615/A615M Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement

    A648 Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Pipe

    A704/A704M Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement

    A706/A706M Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement

    A722/A722M Standard Specification for High-Strength Steel Bars for Prestressed Concrete

    A767/A767M Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement

    A775/A775M Standard Specification for Epoxy-Coated Steel Reinforcing Bars

    A779/A779M Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted for Prestressed Concrete

    A820/A820M Standard Specification for Steel Fibers for Fiber-Reinforced Concrete

    A821/A821M Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Tanks

    A881/A881M Standard Specification for Steel Wire, Indented, Low-Relaxation for Prestressed Concrete Railroad Ties

    A882/A882M Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand

    A884/A884M Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement

    A886/A886M Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete

    A910/A910M Standard Specification for Uncoated, Weldless, 2-Wire and 3-Wire Steel Strand for Prestressed Concrete

    A911/A911M Standard Specification for Uncoated, Stress-Relieved Steel Bars for Prestressed Concrete Ties

    A933/A933M Standard Specification for Vinyl-Coated Steel Wire and Welded Wire Reinforcement

    A934/A934M Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars

    A944 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens

    A951/A951M Standard Specification for Steel Wire for Masonry Joint Reinforcement

    A955/A955M Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement

    A970/A970M Standard Specification for Headed Steel Bars for Concrete Reinforcement

    A981/A981M Standard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Steel Prestressing Strand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors

    A996/A996M Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement


    A01.03 - Steel Rod and Wire

    A1000/A1000M Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality

    A1007 Standard Specification for Carbon Steel Wire for Wire Rope

    A1023/A1023M Standard Specification for Stranded Carbon Steel Wire Ropes for General Purposes

    A227/A227M Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs

    A228/A228M Standard Specification for Steel Wire, Music Spring Quality

    A229/A229M Standard Specification for Steel Wire, Quenched and Tempered for Mechanical Springs

    A230/A230M Standard Specification for Steel Wire, Oil-Tempered Carbon Valve Spring Quality

    A231/A231M Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire

    A232/A232M Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire

    A401/A401M Standard Specification for Steel Wire, Chromium-Silicon Alloy

    A407 Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs

    A510/A510M Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel

    A679/A679M Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn

    A713 Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components

    A853 Standard Specification for Steel Wire, Carbon, for General Use

    A877/A877M Standard Specification for Steel Wire, Chromium-Silicon Alloy, Chrome-Silicon-Vanadium Alloy Valve Spring Quality

    A878/A878M Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality

    A899 Standard Specification for Steel Wire, Epoxy-Coated

    A905 Standard Specification for Steel Wire, Pressure Vessel Winding

    A931 Standard Test Method for Tension Testing of Wire Ropes and Strand

    A938 Standard Test Method for Torsion Testing of Wire


    A01.02 - Structural Steel for Bridges, Buildings, Rolling Stock and Ships

    A1043/A1043M Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings

    A1066/A1066M Standard Specification for High-Strength Low-Alloy Structural Steel Plate Produced by Thermo-Mechanical Controlled Process (TMCP)

    A1077/A1077M Standard Specification for Structural Steel with Improved Yield Strength at High Temperature for Use in Buildings

    A131/A131M Standard Specification for Structural Steel for Ships

    A242/A242M Standard Specification for High-Strength Low-Alloy Structural Steel

    A283/A283M Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates

    A328/A328M Standard Specification for Steel Sheet Piling

    A36/A36M Standard Specification for Carbon Structural Steel

    A514/A514M Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding

    A529/A529M Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality

    A572/A572M Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel

    A573/A573M Standard Specification for Structural Carbon Steel Plates of Improved Toughness

    A588/A588M Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance

    A6/A6M Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling

    A633/A633M Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates

    A656/A656M Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability

    A673/A673M Standard Specification for Sampling Procedure for Impact Testing of Structural Steel

    A690/A690M Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments

    A709/A709M Standard Specification for Structural Steel for Bridges

    A710/A710M Standard Specification for Precipitation–Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates

    A769/A769M Standard Specification for Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural Shapes

    A786/A786M Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates

    A827/A827M Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications

    A829/A829M Standard Specification for Alloy Structural Steel Plates

    A830/A830M Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements

    A857/A857M Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage

    A871/A871M Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance

    A898/A898M Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes

    A913/A913M Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST)

    A945/A945M Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness

    A950/A950M Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling

    A992/A992M Standard Specification for Structural Steel Shapes


    A01.01 - Steel Rails and Accessories

    A1 Standard Specification for Carbon Steel Tee Rails

    A183 Standard Specification for Carbon Steel Track Bolts and Nuts

    A2 Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types

    A3 Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)

    A49 Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars

    A65 Standard Specification for Steel Track Spikes

    A66 Standard Specification for Steel Screw Spikes

    A67 Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked

    A759 Standard Specification for Carbon Steel Crane Rails