Civil by Committee

    F36.10 - Optical Fiber Systems within Existing Infrastructure

    F2233 Standard Guide for Safety, Access Rights, Construction, Liability, and Risk Management for Optical Fiber Networks in Existing Sewers

    F2303 Standard Practice for Selection of Gravity Sewers Suitable for Installation of Optical Fiber Cable and Conduits

    F2349 Standard Practice for Operation and Maintenance of Integrated Natural Gas Pipelines and Optical Fiber Systems

    F2350 Standard Practice for Selection of Natural Gas Pipelines Suitable for Installation of Optical Fiber Systems

    F2462 Standard Practice for Operation and Maintenance of Sewers with Optical Fiber Systems

    F3079 Standard Practice for Use of Distributed Optical Fiber Sensing Systems for Monitoring the Impact of Ground Movements During Tunnel and Utility Construction on Existing Underground Utilities

    F3092 Standard Terminology Relating to Optical Fiber Sensing Systems


    F17.67 - Trenchless Plastic Pipeline Technology

    F1216 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube

    F1504 Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation

    F1606 Standard Practice for Rehabilitation of Existing Sewers and Conduits with Deformed Polyethylene (PE) Liner

    F1697 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit

    F1698 Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits

    F1735 Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits

    F1741 Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits

    F1743 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)

    F1867 Standard Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation

    F1871 Standard Specification for Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation

    F1947 Standard Practice for Installation of Folded Poly (Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits

    F1962 Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings

    F2019 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)

    F2561 Standard Practice for Rehabilitation of a Sewer Service Lateral and Its Connection to the Main Using a One Piece Main and Lateral Cured-in-Place Liner

    F2599 Standard Practice for The Sectional Repair of Damaged Pipe By Means of An Inverted Cured-In-Place Liner

    F2718 Standard Specification for Polyethylene (PE) and Cement Materials for an Encapsulated Cement Mortar Formed in Place Liner System (FIPLS) for the Rehabilitation of Water Pipelines

    F2719 Standard Practice for Installation of Polyethylene (PE) and Encapsulated Cement Mortar Formed in Place Lining System (FIPLS) for the Rehabilitation of Water Pipelines

    F2831 Standard Practice for Internal Non Structural Epoxy Barrier Coating Material Used In Rehabilitation of Metallic Pressurized Piping Systems

    F2984 Standard Specification for Segmental Panel System for the Grout-in-Place-Liner (GIPL) Rehabilitation Method of Existing Man-Entry Size Sewers, Culverts, and Conduits

    F2985 Standard Practice for Installation of a PVC Segmental Panel Liner System in Man-Entry Size Sewers and Conduits

    F2994 Standard Practice for Utilization of Mobile, Automated Cured-In-Place Pipe (CIPP) Impregnation Systems


    F17.65 - Land Drainage

    D2852 Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings

    F2418 Standard Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers

    F2648/F2648M Standard Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications

    F2787 Standard Practice for Structural Design of Thermoplastic Corrugated Wall Stormwater Collection Chambers

    F2922 Standard Specification for Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers

    F2986 Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Leachate Applications

    F405 Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings

    F449 Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control

    F481 Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields

    F667/F667M Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings

    F758 Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage

    F810 Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields


    F17.63 - DWV

    D2661 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings

    D2665 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

    D2949 Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

    D3311 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns

    F1412 Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems

    F1499 Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)

    F1673 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems

    F1866 Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings

    F1901 Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems

    F2021 Standard Guide for Design and Installation of Plastic Siphonic Roof Drainage Systems

    F2135 Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings

    F2390 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV) Pipe and Fittings Having Post-Industrial Recycle Content

    F2536 Standard Guide for Installing Plastic DWV Piping Suspended from On-Grade Slabs

    F2618 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems

    F409 Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings

    F628 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core


    F17.62 - Sewer

    D2321 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications

    D2680 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping

    D2729 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings

    D3034 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings

    F1336 Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings

    F1417 Standard Practice for Installation Acceptance of Plastic Non-pressure Sewer Lines Using Low-Pressure Air

    F1675 Standard Practice for Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits

    F1732 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material

    F2306/F2306M Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications

    F2658 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings

    F2762 Standard Specification for 12 to 30 in. (300 to 750 mm) Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications

    F2763 Standard Specification for 30 to 60 in. [750 to 1500 mm] Triple Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications

    F2764/F2764M Standard Specification for 30 to 60 in. [750 to 1500 mm] Polypropylene (PP) Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications

    F2881 Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications

    F2947/F2947M Standard Specification for 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications

    F585 Standard Guide for Insertion of Flexible Polyethylene Pipe Into Existing Sewers

    F679 Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings

    F794 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter

    F949 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings


    F14.40 - Chain Link Fence and Wire Accessories

    A392 Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric

    A491 Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric

    A824 Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence

    F1043 Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework

    F1083 Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures

    F1183 Standard Specification for Aluminum Alloy Chain Link Fence Fabric

    F1184 Standard Specification for Industrial and Commercial Horizontal Slide Gates

    F1345 Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric

    F1379 Standard Terminology Relating to Barbed Tape

    F1553 Standard Guide for Specifying Chain Link Fence

    F1664 Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence

    F1665 Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence

    F1910 Standard Specification for Long Barbed Tape Obstacles

    F1911 Standard Practice for Installation of Barbed Tape

    F3000/F3000M Standard Specification for Polymer Privacy Insert Slats for Chain Link Fabric and Privacy Chain Link Fabric Manufactured Containing Pre-Installed Privacy Slats

    F552 Standard Terminology Relating to Chain Link Fencing

    F567 Standard Practice for Installation of Chain-Link Fence

    F626 Standard Specification for Fence Fittings

    F654 Standard Specification for Residential Chain Link Fence Gates

    F668 Standard Specification for Polyvinyl Chloride (PVC) and Other Organic Polymer-Coated Steel Chain-Link Fence Fabric

    F900 Standard Specification for Industrial and Commercial Swing Gates

    F934 Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials


    F14.50 - High Security Fences and Perimeter Barriers

    F1712 Standard Specification for Steel Chain-Link Fencing Materials Used for High Security Applications

    F2611 Standard Guide for Design and Construction of Chain Link Security Fencing

    F2780 Standard Guide for Design and Construction of Expanded Metal Security Fences and Barriers

    F2781 Standard Practice for Testing Forced Entry, Ballistic and Low Impact Resistance of Security Fence Systems

    F2814 Standard Guide for Design and Construction of Ornamental Steel Picket Fence Systems for Security Purposes


    F14.10 - Specific Applications

    F1908 Standard Guide for Fences for Residential Outdoor Swimming Pools, Hot Tubs, and Spas

    F2000 Standard Guide for Fences for Baseball and Softball Fields

    F2049 Standard Safety Performance Specification for Fences/Barriers for Public, Commercial, and Multi-Family Residential Use Outdoor Play Areas

    F2200 Standard Specification for Automated Vehicular Gate Construction

    F2409 Standard Guide for Fences for Non-Residential Outdoor Swimming Pools, Hot Tubs, and Spas

    F2631 Standard Practice for Installation of Chain-Link Fence for Outdoor Sports Fields, Sports Courts and Other Recreation Facilities

    F2698 Standard Guide for Fences for Above-Ground and In-ground Skate Park Facilities

    F2699 Standard Guide for Fences for Commercial and Public Outdoor Water Spray/Play Areas

    F969 Standard Practice for Construction of Chain-Link Tennis Court Fence


    F12.10 - Systems Products and Services

    F1090 Standard Classification for Bank and Mercantile Vault Construction

    F1233 Standard Test Method for Security Glazing Materials And Systems

    F1247 Standard Specification for Intrusion Resistant Generic Vault Structures

    F1642 Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings

    F2247 Standard Test Method for Metal Doors Used in Blast Resistant Applications (Equivalent Static Load Method)

    F2248 Standard Practice for Specifying an Equivalent 3-Second Duration Design Loading for Blast Resistant Glazing Fabricated with Laminated Glass

    F2656 Standard Test Method for Vehicle Crash Testing of Perimeter Barriers

    F2766 Standard Test Method for Boat Barriers

    F2912 Standard Specification for Glazing and Glazing Systems Subject to Airblast Loadings

    F2927 Standard Test Method for Door Systems Subject to Airblast Loadings

    F3006 Standard Specification for Ball Drop Impact Resistance of Laminated Architectural Flat Glazing

    F3007 Standard Test Method for Ball Drop Impact Resistance of Laminated Architectural Flat Glass

    F3016/F3016M Standard Test Method for Surrogate Testing of Vehicle Impact Protective Devices at Low Speeds

    F3038 Standard Test Method for Timed Evaluation of Forced-Entry-Resistant Systems

    F3057 Standard Test Method for Electromagnetic Shielding Effectiveness of Glazings

    F967 Standard Practice for Security Engineering Symbols


    F06.80 - Specifications

    F1066 Standard Specification for Vinyl Composition Floor Tile

    F1303 Standard Specification for Sheet Vinyl Floor Covering with Backing

    F1344 Standard Specification for Rubber Floor Tile

    F1700 Standard Specification for Solid Vinyl Floor Tile

    F1859 Standard Specification for Rubber Sheet Floor Covering Without Backing

    F1860 Standard Specification for Rubber Sheet Floor Covering With Backing

    F1861 Standard Specification for Resilient Wall Base

    F1913 Standard Specification for Vinyl Sheet Floor Covering Without Backing

    F2034 Standard Specification for Sheet Linoleum Floor Covering

    F2169 Standard Specification for Resilient Stair Treads

    F2195 Standard Specification for Linoleum Floor Tile

    F2982 Standard Specification for Polyester Composition Floor Tile

    F3008 Standard Specification for Cork Floor Tile

    F3009 Standard Specification for Polyolefin Composition Floor Tile

    F3041 Standard Specification for Bonded Rubber Crumb Floor Coverings


    F06.40 - Practices

    F1482 Standard Practice for Installation and Preparation of Panel Type Underlayments to Receive Resilient Flooring

    F1516 Standard Practice for Sealing Seams of Resilient Flooring Products by the Heat Weld Method (when Recommended)

    F1869 Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride

    F2170 Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes

    F2419 Standard Practice for Installation of Thick Poured Gypsum Concrete Underlayments and Preparation of the Surface to Receive Resilient Flooring

    F2471 Standard Practice for Installation of Thick Poured Lightweight Cellular Concrete Underlayments and Preparation of the Surface to Receive Resilient Flooring

    F2659 Standard Guide for Preliminary Evaluation of Comparative Moisture Condition of Concrete, Gypsum Cement and Other Floor Slabs and Screeds Using a Non-Destructive Electronic Moisture Meter

    F2678 Standard Practice for Preparing Panel Underlayments, Thick Poured Gypsum Concrete Underlayments, Thick Poured Lightweight Cellular Concrete Underlayments, and Concrete Subfloors with Underlayment Patching Compounds to Receive Resilient Flooring

    F2753 Standard Practice to Evaluate the Effect of Dynamic Rolling Load over Resilient Floor Covering System

    F2873 Standard Practice for the Installation of Self-Leveling Underlayment and the Preparation of Surface to Receive Resilient Flooring

    F3010 Standard Practice for Two-Component Resin Based Membrane-Forming Moisture Mitigation Systems for Use Under Resilient Floor Coverings

    F693 Standard Practice for Sealing Seams of Resilient Sheet Flooring Products by Use of Liquid Seam Sealers

    F710 Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring


    F06.20 - Test Methods - Products Construction/Materials

    F1304 Standard Test Method for Deflection of Resilient Floor Tile

    F137 Standard Test Method for Flexibility of Resilient Flooring Materials with Cylindrical Mandrel Apparatus

    F150 Standard Test Method for Electrical Resistance of Conductive and Static Dissipative Resilient Flooring

    F2055 Standard Test Method for Size and Squareness of Resilient Floor Tile by Dial Gage Method

    F2421 Standard Test Method for Measurement of Resilient Floor Plank by Dial Gage

    F373 Standard Test Method for Embossed Depth of Resilient Floor Coverings

    F386 Standard Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces

    F387 Standard Test Method for Measuring Thickness of Resilient Floor Covering With Foam Layer

    F410 Standard Test Method for Wear Layer Thickness of Resilient Floor Coverings by Optical Measurement

    F511 Standard Test Method for Quality of Cut (Joint Tightness) of Resilient Floor Tile


    E36.70 - Agencies Performing Construction Inspection, Testing and Special Inspection

    E329 Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection

    E541 Standard Specification for Agencies Engaged in System Analysis and Compliance Assurance for Manufactured Building

    E651/E651M Standard Practice for Evaluating Capabilities of Agencies Involved in System Analysis and Compliance Assurance for Manufactured Building

    E699 Standard Practice for Evaluation of Agencies Involved in Testing, Quality Assurance, and Evaluating of Building Components


    E60.01 - Buildings and Construction

    E1971 Standard Guide for Stewardship for the Cleaning of Commercial and Institutional Buildings

    E2114 Standard Terminology for Sustainability Relative to the Performance of Buildings

    E2129 Standard Practice for Data Collection for Sustainability Assessment of Building Products

    E2392/E2392M Standard Guide for Design of Earthen Wall Building Systems

    E2432 Standard Guide for General Principles of Sustainability Relative to Buildings

    E2635 Standard Practice for Water Conservation in Buildings Through In-Situ Water Reclamation

    E2717 Standard Practice for Estimating the Environmental Load of Residential Wastewater

    E2727 Standard Practice for Assessment of Rainwater Quality

    E2728 Standard Guide for Water Stewardship in the Design, Construction, and Operation of Buildings

    E2921 Standard Practice for Minimum Criteria for Comparing Whole Building Life Cycle Assessments for Use with Building Codes and Rating Systems


    E33.04 - Application of Acoustical Materials and Systems

    C367/C367M Standard Test Methods for Strength Properties of Prefabricated Architectural Acoustical Tile or Lay-In Ceiling Panels

    C635/C635M Standard Specification for the Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings

    C636/C636M Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels

    E1042 Standard Classification for Acoustically Absorptive Materials Applied by Trowel or Spray

    E1264 Standard Classification for Acoustical Ceiling Products

    E557 Standard Guide for Architectural Design and Installation Practices for Sound Isolation between Spaces Separated by Operable Partitions

    E580/E580M Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions


    E33.03 - Sound Transmission

    E1007 Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures

    E1123 Standard Practices for Mounting Test Specimens for Sound Transmission Loss Testing of Naval and Marine Ship Bulkhead Treatment Materials

    E1289 Standard Specification for Reference Specimen for Sound Transmission Loss

    E1332 Standard Classification for Rating Outdoor-Indoor Sound Attenuation

    E1414/E1414M Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum

    E1704 Standard Guide for Specifying Acoustical Performance of Sound-Isolating Enclosures

    E2179 Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors

    E2249 Standard Test Method for Laboratory Measurement of Airborne Transmission Loss of Building Partitions and Elements Using Sound Intensity

    E2611 Standard Test Method for Measurement of Normal Incidence Sound Transmission of Acoustical Materials Based on the Transfer Matrix Method

    E2963 Standard Test Method for Laboratory Measurement of Acoustical Effectiveness of Ship Noise Treatments Laboratory Measurement of Acoustical Effectiveness for Marine Bulkhead and Deck Treatments

    E2964 Standard Test Method for Measurement of the Normalized Insertion Loss of Doors

    E336 Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings

    E413 Classification for Rating Sound Insulation

    E492 Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine

    E596 Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures

    E756 Standard Test Method for Measuring Vibration-Damping Properties of Materials

    E90 Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements

    E966 Standard Guide for Field Measurements of Airborne Sound Insulation of Building Facades and Facade Elements

    E989 Standard Classification for Determination of Impact Insulation Class (IIC)


    E17.52 - Traffic Monitoring

    E1318 Standard Specification for Highway Weigh-in-Motion (WIM) Systems with User Requirements and Test Methods

    E1957 Standard Practice for Installing Using Pneumatic Tubes with Roadway Traffic Counters and Classifiers

    E2259 Standard Guide for Archiving and Retrieving ITS-Generated Data

    E2300 Standard Specification for Highway Traffic Monitoring Devices

    E2415 Standard Practice for Installing Piezoelectric Highway Traffic Sensors

    E2467 Standard Practice for Developing Axle Count Adjustment Factors

    E2468 Standard Practice for Metadata to Support Archived Data Management Systems

    E2532 Standard Test Methods for Evaluating Performance of Highway Traffic Monitoring Devices

    E2561 Standard Practice for the Installation of Inductive Loop Detectors

    E2667 Standard Practice for Acquiring Intersection Turning Movement Traffic Data

    E2759 Standard Practice for Highway Traffic Monitoring Truth-in-Data


    E17.42 - Pavement Management and Data Needs

    D5340 Standard Test Method for Airport Pavement Condition Index Surveys

    D6433 Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys

    E1166 Standard Guide for Network Level Pavement Management

    E1656/E1656M Standard Guide for Classification of Automated Pavement Condition Survey Equipment

    E1777 Standard Guide for Prioritization of Data Needs for Pavement Management

    E1778 Standard Terminology Relating to Pavement Distress

    E1889 Standard Guide for Pavement Management Implementation

    E2840 Standard Practice for Pavement Condition Index Surveys for Interlocking Concrete Roads and Parking Lots


    E17.41 - Pavement Testing and Evaluation

    D1195/D1195M Standard Test Method for Repetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements

    D1196/D1196M Standard Test Method for Nonrepetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements

    D4602 Standard Guide for Nondestructive Testing of Pavements Using Cyclic-Loading Dynamic Deflection Equipment

    D4694 Standard Test Method for Deflections with a Falling-Weight-Type Impulse Load Device

    D4695 Standard Guide for General Pavement Deflection Measurements

    D4748 Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar

    D5858 Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory

    D6951/D6951M Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications

    D7228 Standard Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures

    E2583 Standard Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD)

    E2835 Standard Test Method for Measuring Deflections using a Portable Impulse Plate Load Test Device


    E17.31 - Methods for Measuring Profile and Roughness

    E1082 Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness

    E1215 Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness

    E1274 Standard Test Method for Measuring Pavement Roughness Using a Profilograph

    E1364 Standard Test Method for Measuring Road Roughness by Static Level Method

    E1448/E1448M Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness

    E1703/E1703M Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge

    E2133 Standard Test Method for Using a Rolling Inclinometer to Measure Longitudinal and Transverse Profiles of a Traveled Surface

    E2560 Standard Specification for Data Format for Pavement Profile

    E950/E950M Standard Test Method for Measuring the Longitudinal Profile of Traveled Surfaces with an Accelerometer Established Inertial Profiling Reference


    E17.21 - Field Methods for Measuring Tire Pavement Friction

    E1337 Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire

    E1859/E1859M Standard Test Method for Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique

    E1890 Standard Guide for Validating New Area Reference Skid Measurement Systems and Equipment

    E1911 Standard Test Method for Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester

    E1960 Standard Practice for Calculating International Friction Index of a Pavement Surface

    E2100 Standard Practice for Calculating the International Runway Friction Index

    E2101 Standard Test Method for Measuring the Frictional Properties of Winter Contaminated Pavement Surfaces Using an Averaging-Type Spot Measuring Decelerometer

    E2340/E2340M Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique

    E2341/E2341M Standard Test Method for Determining the Stopping Distance Number by Initial Speed and Stopping Distance at Traffic Incident Sites

    E2666 Standard Practice for Correlations of Mu Values of Continuous Friction Measurement Equipment to Determine Maintenance Levels for Use at Airports

    E274/E274M Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire

    E2793 Standard Guide for the Evaluation, Calibration, and Correlation of E274 Friction Measurement Systems and Equipment

    E2883 Standard Guide for Standard Guide for the Evaluation, and Calibration, Continuous Friction Measurement Equipment (CFME)

    E445/E445M Standard Test Method for Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped With Full-Scale Tires

    E556/E556M Standard Test Method for Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform (User Level)

    E670 Standard Test Method for Side Force Friction on Paved Surfaces Using the Mu-Meter


    E12.10 - Retroreflection

    D4061 Standard Test Method for Retroreflectance of Horizontal Coatings

    E1709 Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.2 Degree Observation Angle

    E1710 Standard Test Method for Measurement of Retroreflective Pavement Marking Materials with CEN-Prescribed Geometry Using a Portable Retroreflectometer

    E2177 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance (RL) of Pavement Markings in a Standard Condition of Wetness

    E2302 Standard Test Method for Measurement of the Luminance Coefficient Under Diffuse Illumination of Pavement Marking Materials Using a Portable Reflectometer

    E2367 Standard Test Method for Measurement of Nighttime Chromaticity of Pavement Marking Materials Using a Portable Retroreflection Colorimeter

    E2540 Standard Test Method for Measurement of Retroreflective Signs Using a Portable Retroreflectometer at a 0.5 Degree Observation Angle

    E2832 Standard Test Method for Measuring the Coefficient of Retroreflected Luminance of Pavement Markings in a Standard Condition of Continuous Wetting (RL-2)

    E808 Standard Practice for Describing Retroreflection

    E809 Standard Practice for Measuring Photometric Characteristics of Retroreflectors

    E810 Standard Test Method for Coefficient of Retroreflection of Retroreflective Sheeting Utilizing the Coplanar Geometry

    E811 Standard Practice for Measuring Colorimetric Characteristics of Retroreflectors Under Nighttime Conditions


    E06.81 - Building Economics

    E1057 Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems

    E1074 Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems

    E1121 Standard Practice for Measuring Payback for Investments in Buildings and Building Systems

    E1185 Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems

    E1369 Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems

    E1557 Standard Classification for Building Elements and Related Sitework-UNIFORMAT II

    E1699 Standard Practice for Performing Value Engineering (VE)/Value Analysis (VA) of Projects, Products and Processes

    E1765 Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Buildings and Building Systems

    E1804 Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project

    E1946 Standard Practice for Measuring Cost Risk of Buildings and Building Systems and Other Constructed Projects

    E2013 Standard Practice for Constructing FAST Diagrams and Performing Function Analysis During Value Analysis Study

    E2083 Standard Classification for Building Construction Field Requirements, and Office Overhead Profit

    E2103/E2103M Standard Classification for Bridge Elements—UNIFORMAT II

    E2150 Standard Classification for Life-Cycle Environmental Work Elements—Environmental Cost Element Structure

    E2166 Standard Practice for Organizing and Managing Building Data

    E2168 Standard Classification for Allowance, Contingency and Reserve Sums in Building Construction Estimating

    E2204 Standard Guide for Summarizing the Economic Impacts of Building-Related Projects

    E2506 Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities

    E2514 Standard Practice for Presentation Format of Elemental Cost Estimates, Summaries, and Analyses

    E2516 Standard Classification for Cost Estimate Classification System

    E2620 Standard Classification for Program and Project Estimate Summaries

    E2637 Standard Guide for Utilizing the Environmental Cost Element Structure Presented by Classification E2150

    E2691 Standard Practice for Job Productivity Measurement

    E833 Standard Terminology of Building Economics

    E917 Standard Practice for Measuring Life-Cycle Costs of Buildings and Building Systems

    E964 Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems


    E06.56 - Performance of Railing Systems and Glass for Floors and Stairs

    E1481 Standard Terminology of Railing Systems and Rails for Buildings

    E2353 Standard Test Methods for Performance of Glazing in Permanent Railing Systems, Guards, and Balustrades

    E2358 Standard Specification for the Performance of Glass in Permanent Glass Railing Systems, Guards, and Balustrades

    E2751/E2751M Standard Practice for Design and Performance of Supported Laminated Glass Walkways

    E894 Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings

    E935 Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings


    E06.53 - Materials and Processes for Durable Rigidwall Relocatable Structures

    E1091 Standard Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels

    E1307 Standard Practice for Surface Preparation and Structural Adhesive Bonding of Precured, Nonmetallic Composite Facings to Structural Core for Flat Shelter Panels

    E1555 Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair

    E1556 Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair

    E1730 Standard Specification for Rigid Foam for Use in Structural Sandwich Panel Cores

    E1749 Standard Terminology Relating to Rigid Wall Relocatable Shelters

    E1773 Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants

    E1793 Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters

    E1794 Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (200°F Elevated Humidity Service), Type II Panels

    E1800 Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (160°F Elevated Humidity Service), Type I Panels

    E1801 Standard Practice for Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters

    E1826 Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded

    E1851 Standard Test Method for Electromagnetic Shielding Effectiveness of Durable Rigid Wall Relocatable Structures

    E1925 Specifiction for Engineering and Design Criteria for Rigid Wall Relocatable Structures

    E1974 Standard Specification for Shelter, Electrical Equipment S-250/G

    E1975 Standard Specification for Shelter, Electrical, Equipment S-280/G

    E1976 Standard Specification for Shelter, Tactical, Nonexpandable

    E1977 Standard Specification for Shelter, Tactical, Expandable, One-Side

    E1978 Standard Specification for Shelter, Tactical, Expandable, Two-Side

    E2004 Standard Test Method for Facing Cleavage of Sandwich Panels

    E2377 Standard Specification for Shelter, Electrical Equipment, Lightweight

    E2462 Standard Performance Specification for Cargo Bed Cover (CBC) HMMWV, Type I

    E2463 Standard Performance Specification for Cargo Bed Cover (CBC) M105A2 Trailer, Type II

    E2517 Standard Specification for Cargo Bed Cover, Type III (M35A2, 2 1/2 Ton Cargo Truck/M1078, 2 1/2 Ton Lightweight Medium Tactical Vehicle (LMTV)/ M1082, 2 1/2 Ton LMTV Trailer)

    E2518 Standard Specification for Cargo Bed Cover, Type IV (M923, 5 Ton Cargo Truck/M1083, 5 Ton Medium Tactical Vehicle (MTV)/ M1082, 5 Ton MTV Trailer)

    E864 Standard Practice for Surface Preparation of Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels

    E865 Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels

    E866 Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels

    E874 Standard Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels

    E990 Standard Specification for Core-Splice Adhesive for Honeycomb Sandwich Structural Panels


    E06.55 - Performance of Building Enclosures

    E1825 Standard Guide for Evaluation of Exterior Building Wall Materials, Products, and Systems

    E2099 Standard Practice for the Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems

    E2128 Standard Guide for Evaluating Water Leakage of Building Walls

    E2266 Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion

    E2270 Standard Practice for Periodic Inspection of Building Facades for Unsafe Conditions

    E2505 Standard Practice for Industrial Rope Access

    E2556/E2556M Standard Specification for Vapor Permeable Flexible Sheet Water-Resistive Barriers Intended for Mechanical Attachment

    E2813 Standard Practice for Building Enclosure Commissioning

    E2841 Standard Guide for Conducting Inspections of Building Facades for Unsafe Conditions

    E2925 Standard Specification for Manufactured Polymeric Drainage and Ventilation Materials Used to Provide a Rainscreen Function

    E2947 Standard Guide for Building Enclosure Commissioning


    E06.51 - Performance of Windows, Doors, Skylights and Curtain Walls

    E1105 Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference

    E1233/E1233M Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential

    E1300 Standard Practice for Determining Load Resistance of Glass in Buildings

    E1423 Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems

    E1424 Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen

    E1425 Standard Practice for Determining the Acoustical Performance of Windows, Doors, Skylight, and Glazed Wall Systems

    E1748 Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System

    E1886 Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials

    E1996 Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes

    E2025 Standard Test Method for Evaluating Fenestration Components and Assemblies for Resistance to Impact Energies

    E2068 Standard Test Method for Determination of Operating Force of Sliding Windows and Doors

    E2112 Standard Practice for Installation of Exterior Windows, Doors and Skylights

    E2264 Standard Practice for Determining the Effects of Temperature Cycling on Fenestration Products

    E2268 Standard Test Method for Water Penetration of Exterior Windows, Skylights, and Doors by Rapid Pulsed Air Pressure Difference

    E2319 Standard Test Method for Determining Air Flow Through the Face and Sides of Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen

    E2395 Standard Specification for Voluntary Security Performance of Window and Door Assemblies with and without Glazing Impact

    E2431 Standard Practice for Determining the Resistance of Single Glazed Annealed Architectural Flat Glass to Thermal Loadings

    E2461 Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs

    E2692 Standard Test Method for Structural Performance of Thermal Barriers in Fenestration Products ,

    E283 Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen

    E330/E330M Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference

    E331 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference

    E405 Standard Test Methods for Wear Testing Rotary Operators for Windows

    E547 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference

    E783 Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors

    E987 Standard Test Methods for Deglazing Force of Fenestration Products

    E997 Standard Test Method for Evaluating Glass Breakage Probability Under the Influence of Uniform Static Loads by Proof Load Testing

    E998 Standard Test Method for Structural Performance of Glass in Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Nondestructive Method

    F588 Standard Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact

    F842 Standard Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact


    E06.25 - Whole Buildings and Facilities

    E1480 Standard Terminology of Facility Management (Building-Related)

    E1660 Standard Classification for Serviceability of an Office Facility for Support for Office Work

    E1661 Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness

    E1662 Standard Classification for Serviceability of an Office Facility for Sound and Visual Environment

    E1663 Standard Classification for Serviceability of an Office Facility for Typical Office Information Technology

    E1664 Standard Classification for Serviceability of an Office Facility for Layout and Building Factors

    E1665 Standard Classification for Serviceability of an Office Facility for Facility Protection

    E1666 Standard Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions

    E1667 Standard Classification for Serviceability of an Office Facility for Image to the Public and Occupants

    E1668 Standard Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff

    E1669 Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding

    E1670 Standard Classification for Serviceability of an Office Facility for Management of Operations and Maintenance

    E1671 Standard Classification for Serviceability of an Office Facility for Cleanliness

    E1679 Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility, and for Determining What Serviceability is Provided or Proposed

    E1692 Standard Classification for Serviceability of an Office Facility for Change and Churn by Occupants

    E1693 Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets

    E1694 Standard Classification for Serviceability of an Office Facility for Special Facilities and Technologies

    E1700 Standard Classification for Serviceability of an Office Facility for Structure and Building Envelope

    E1701 Standard Classification for Serviceability of an Office Facility for Manageability

    E1836/E1836M Standard Practice for Building Floor Area Measurements for Facility Management

    E2026 Standard Guide for Seismic Risk Assessment of Buildings

    E2136 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Durability

    E2151 Standard Terminology of Guides for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings

    E2156 Standard Guide for Evaluating Economic Performance of Alternative Designs, Systems, and Materials in Compliance with Performance Standard Guides for Single-Family Attached and Detached Dwellings

    E2267 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Indoor Air Quality

    E2320 Standard Classification for Serviceability of an Office Facility for Thermal Environment and Indoor Air Conditions

    E2351 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Functionality

    E2557 Standard Practice for Probable Maximum Loss (PML) Evaluations for Earthquake Due-Diligence Assessments

    E2619/E2619M Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Area in Buildings


    E06.41 - Air Leakage and Ventilation Performance

    E1186 Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems

    E1258 Standard Test Method for Airflow Calibration of Fan Pressurization Devices

    E1465 Standard Practice for Radon Control Options for the Design and Construction of New Low-Rise Residential Buildings

    E1554/E1554M Standard Test Methods for Determining Air Leakage of Air Distribution Systems by Fan Pressurization

    E1677 Standard Specification for Air Barrier (AB) Material or System for Low-Rise Framed Building Walls

    E1827 Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door

    E1998 Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances

    E2029 Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution

    E2121 Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings

    E2178 Standard Test Method for Air Permeance of Building Materials

    E2342/E2342M Standard Test Method for Durability Testing of Duct Sealants

    E2357 Standard Test Method for Determining Air Leakage of Air Barrier Assemblies

    E241 Standard Guide for Limiting Water-Induced Damage to Buildings

    E741 Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution

    E779 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization


    E06.24 - Building Preservation and Rehabilitation Technology

    E1857 Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces

    E2167 Standard Guide for Selection and Use of Stone Consolidants

    E2260 Standard Guide for Repointing (Tuckpointing) Historic Masonry


    E06.23 - Lead Hazards Associated with Buildings

    E1605 Standard Terminology Relating to Lead in Buildings

    E1613 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques

    E1644 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead

    E1645 Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis

    E1726 Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis

    E1728 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination

    E1753 Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films

    E1775 Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead

    E1792 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust

    E1795 Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings

    E1796 Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings

    E1797 Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings

    E1908 Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)

    E1979 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead

    E2120 Standard Practice for Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films

    E2239 Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities

    E2252 Standard Practice for Selection of Lead Hazard Reduction Methods for Identified Risks in Residential Housing or Child Occupied Facilities

    E2255/E2255M Standard Practice for Conducting Visual Assessments for Lead Hazards in Buildings

    E2271 Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Dwellings, and in Other Child-Occupied Facilities

    E2913 Standard Practice for Hotplate Digestion of Lead from Composited Wipe Samples

    E2914 Standard Practice for Ultrasonic Extraction of Lead from Composited Wipe Samples


    E06.22 - Durability Performance of Building Constructions

    E2141 Standard Test Method for Accelerated Aging of Electrochromic Devices in Sealed Insulating Glass Units

    E2188 Standard Test Method for Insulating Glass Unit Performance

    E2189 Standard Test Method for Testing Resistance to Fogging in Insulating Glass Units

    E2190 Standard Specification for Insulating Glass Unit Performance and Evaluation

    E2269 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography

    E2354 Standard Guide for Assessing the Durability of Absorptive Electrochromic Coatings within Sealed Insulating Glass Units

    E2355 Standard Test Method for Measuring the Uniformity of an Absorptive Electrochromic Coating on a Glazing Surface

    E2649 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy

    E2953 Standard Specification for Evaluating Accelerated Aging Performance of Electrochromic Devices in Sealed Insulating Glass Units

    E546 Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units

    E576 Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units in the Vertical Position


    E06.11 - Horizontal and Vertical Structures/Structural Performance of Completed Structures

    E1803 Standard Test Methods for Determining Strength Capacities of Structural Insulated Panels

    E196 Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs

    E2126 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings

    E2127 Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction

    E2322 Standard Test Method for Conducting Transverse and Concentrated Load Tests on Panels used in Floor and Roof Construction

    E455 Standard Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings

    E529 Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction

    E564 Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings

    E575 Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies

    E661 Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads

    E695 Standard Test Method of Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading

    E72 Standard Test Methods of Conducting Strength Tests of Panels for Building Construction

    E73 Standard Practice for Static Load Testing of Truss Assemblies


    E06.21 - Serviceability

    E1155 Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers

    E1155M Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers (Metric)

    E1399/E1399M Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems

    E1486 Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria

    E1486M Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria (Metric)

    E1513 Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs)

    E154/E154M Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover

    E1612/E1612M Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures

    E1643 Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs

    E1745 Standard Specification for Plastic Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs

    E1783/E1783M Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures

    E1993/E1993M Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs

    E2174 Standard Practice for On-Site Inspection of Installed Firestops

    E2393 Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers

    E2634 Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems

    E2785 Standard Test Method for Exposure of Firestop Materials to Severe Environmental Conditions

    E2786 Standard Test Methods for Measuring Expansion of Intumescent Materials Used in Firestop and Joint Systems

    E2923 Standard Practice for Longevity Assessment of Firestop Materials Using Differential Scanning Calorimetry

    E2924 Standard Practice for Intumescent Coatings

    E605 Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members

    E736 Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members

    E759 Standard Test Method for Effect of Deflection on Sprayed Fire-Resistive Material Applied to Structural Members

    E760 Standard Test Method for Effect of Impact on Bonding of Sprayed Fire-Resistive Material Applied to Structural Members

    E761 Standard Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members

    E859 Standard Test Method for Air Erosion of Sprayed Fire-Resistive Materials (SFRMs) Applied to Structural Members

    E937 Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members


    D35.04 - Geosynthetic Clay Liners

    D5887 Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter

    D5888 Standard Guide for Storage and Handling of Geosynthetic Clay Liners

    D5889 Standard Practice for Quality Control of Geosynthetic Clay Liners

    D5890 Standard Test Method for Swell Index of Clay Mineral Component of Geosynthetic Clay Liners

    D5891 Standard Test Method for Fluid Loss of Clay Component of Geosynthetic Clay Liners

    D5993 Standard Test Method for Measuring Mass Per Unit of Geosynthetic Clay Liners

    D6072/D6072M Standard Practice for Obtaining Samples of Geosynthetic Clay Liners

    D6102 Standard Guide for Installation of Geosynthetic Clay Liners

    D6141 Standard Guide for Screening Clay Portion and Index Flux of Geosynthetic Clay Liner (GCL) for Chemical Compatibility to Liquids

    D6243/D6243M Standard Test Method for Determining the Internal and Interface Shear Resistance of Geosynthetic Clay Liner by the Direct Shear Method

    D6495 Standard Guide for Acceptance Testing Requirements for Geosynthetic Clay Liners

    D6496 Standard Test Method for Determining Average Bonding Peel Strength Between the Top and Bottom Layers of Needle-Punched Geosynthetic Clay Liners

    D6766 Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Aqueous Solutions

    D6768/D6768M Standard Test Method for Tensile Strength of Geosynthetic Clay Liners

    D7702/D7702M Standard Guide for Considerations When Evaluating Direct Shear Results Involving Geosynthetics


    D35.10 - Geomembranes

    D2643/D2643M Standard Specification for Prefabricated Bituminous Geomembrane Used as Canal and Ditch Liner (Exposed Type)

    D3745/D3745M Standard Practice for Installation of Prefabricated Asphalt Reservoir, Pond, Canal, and Ditch Liner (Exposed Type)

    D4437 Standard Practice for Non-destructive Testing (NDT) for Determining the Integrity of Seams Used in Joining Flexible Polymeric Sheet Geomembranes

    D4885 Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method

    D5323 Standard Practice for Determination of 2 % Secant Modulus for Polyethylene Geomembranes

    D5494 Standard Test Method for the Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes

    D5514/D5514M Standard Test Method for Large Scale Hydrostatic Puncture Testing of Geosynthetics

    D5617 Standard Test Method for Multi-Axial Tension Test for Geosynthetics

    D5641 Standard Practice for Geomembrane Seam Evaluation by Vacuum Chamber

    D5820 Standard Practice for Pressurized Air Channel Evaluation of Dual Seamed Geomembranes

    D5884 Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes

    D5886 Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications

    D5994 Standard Test Method for Measuring Core Thickness of Textured Geomembrane

    D6214/D6214M Standard Test Method for Determining the Integrity of Field Seams Used in Joining Geomembranes by Chemical Fusion Methods

    D6365 Standard Practice for the Nondestructive Testing of Geomembrane Seams using the Spark Test

    D6392 Standard Test Method for Determining the Integrity of Nonreinforced Geomembrane Seams Produced Using Thermo-Fusion Methods

    D6434 Standard Guide for the Selection of Test Methods for Flexible Polypropylene Geomembranes

    D6455 Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGM)

    D6497 Standard Guide for Mechanical Attachment of Geomembrane to Penetrations or Structures

    D6636 Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes

    D6693 Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes

    D6747 Standard Guide for Selection of Techniques for Electrical Leak Location of Leaks in Geomembranes

    D7002 Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Water Puddle Method

    D7003/D7003M Standard Test Method for Strip Tensile Properties of Reinforced Geomembranes

    D7004/D7004M Standard Test Method for Grab Tensile Properties of Reinforced Geomembranes

    D7006 Standard Practice for Ultrasonic Testing of Geomembranes

    D7007 Standard Practices for Electrical Methods for Locating Leaks in Geomembranes Covered with Water or Earthen Materials

    D7056 Standard Test Method for Determining the Tensile Shear Strength of Pre-Fabricated Bituminous Geomembrane Seams

    D7106 Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes

    D7176 Standard Specification for Non-Reinforced Polyvinyl Chloride (PVC) Geomembranes Used in Buried Applications

    D7177 Standard Specification for Air Channel Evaluation of Polyvinyl Chloride (PVC) Dual Track Seamed Geomembranes

    D7240 Standard Practice for Leak Location using Geomembranes with an Insulating Layer in Intimate Contact with a Conductive Layer via Electrical Capacitance Technique (Conductive Geomembrane Spark Test)

    D7272 Standard Test Method for Determining the Integrity of Seams Used in Joining Geomembranes by Pre-manufactured Taped Methods

    D7274 Standard Test Method for Mineral Stabilizer Content of Prefabricated Bituminous Geomembranes (BGM)

    D7275 Standard Test Method for Tensile Properties of Bituminous Geomembranes (BGM)

    D7407 Standard Guide for Determining The Transmission of Gases Through Geomembranes

    D7408 Standard Specification for Non Reinforced PVC (Polyvinyl Chloride) Geomembrane Seams

    D7465 Standard Specification for Ethylene Propylene Diene Terpolymer (EPDM) Sheet Used In Geomembrane Applications

    D7466 Standard Test Method for Measuring the Asperity Height of Textured Geomembrane

    D7613 Standard Specification for Flexible Polypropylene Reinforced (fPP-R) and Nonreinforced (fPP) Geomembranes

    D7700 Standard Guide for Selecting Test Methods for Geomembrane Seams

    D7703 Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Water Lance Method

    D7747/D7747M Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Strip Tensile Method

    D7749 Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Grab Method

    D7852 Standard Practice for Use of an Electrically Conductive Geotextile for Leak Location Surveys

    D7865 Standard Guide for Identification, Packaging, Handling, Storage and Deployment of Fabricated Geomembrane Panels

    D7909 Standard Guide for Placement of Blind Actual Leaks during Electrical Leak Location Surveys of Geomembranes

    D7953 Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Arc Testing Method

    D7982 Standard Practice for Testing of Factory Thermo-Fusion Seams for Fabricated Geomembrane Panels


    D35.01 - Mechanical Properties

    D4354 Standard Practice for Sampling of Geosynthetics and Rolled Erosion Control Products(RECPs) for Testing

    D4533/D4533M Standard Test Method for Trapezoid Tearing Strength of Geotextiles

    D4595 Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method

    D4632/D4632M Standard Test Method for Grab Breaking Load and Elongation of Geotextiles

    D4759 Standard Practice for Determining the Specification Conformance of Geosynthetics

    D4833/D4833M Standard Test Method for Index Puncture Resistance of Geomembranes and Related Products

    D4884/D4884M Standard Test Method for Strength of Sewn or Bonded Seams of Geotextiles

    D5261 Standard Test Method for Measuring Mass per Unit Area of Geotextiles

    D5321/D5321M Standard Test Method for Determining the Shear Strength of Soil-Geosynthetic and Geosynthetic-Geosynthetic Interfaces by Direct Shear

    D5818 Standard Practice for Exposure and Retrieval of Samples to Evaluate Installation Damage of Geosynthetics

    D6241 Standard Test Method for Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe

    D6244 Standard Test Method for Vertical Compression of Geocomposite Pavement Panel Drains

    D6364 Standard Test Method for Determining Short-Term Compression Behavior of Geosynthetics

    D6637 Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method

    D6638 Standard Test Method for Determining Connection Strength Between Geosynthetic Reinforcement and Segmental Concrete Units (Modular Concrete Blocks)

    D6706 Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil

    D6916 Standard Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks)

    D7005 Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites

    D7179 Standard Test Method for Determining Geonet Breaking Force

    D7273/D7273M Standard Guide for for Acceptance Testing Requirements for Geonets and Geonet Drainage Geocomposites

    D7499/D7499M Standard Test Method for Measuring Geosynthetic-Soil Resilient Interface Shear Stiffness

    D7556 Standard Test Methods for Determining Small-Strain Tensile Properties of Geogrids and Geotextiles by In-Air Cyclic Tension Tests

    D7737 Standard Test Method for Individual Geogrid Junction Strength

    D7748/D7748M Standard Test Method for Flexural Rigidity of Geogrids, Geotextiles and Related Products

    D7853 Standard Test Method for Hydraulic Pullout Resistance of a Geomembrane with Locking Extensions Embedded in Concrete


    D35.02 - Endurance Properties

    D1987 Standard Test Method for Biological Clogging of Geotextile or Soil/Geotextile Filters

    D4355/D4355M Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc Type Apparatus

    D4594 Standard Test Method for Effects of Temperature on Stability of Geotextiles

    D4873 Standard Guide for Identification, Storage, and Handling of Geosynthetic Rolls and Samples

    D4886 Standard Test Method for Abrasion Resistance of Geotextiles (Sand Paper/Sliding Block Method)

    D5262 Standard Test Method for Evaluating the Unconfined Tension Creep and Creep Rupture Behavior of Geosynthetics

    D5322 Standard Practice for Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids

    D5397 Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test

    D5496 Standard Practice for In Field Immersion Testing of Geosynthetics

    D5596 Standard Test Method for Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics

    D5721 Standard Practice for Air-Oven Aging of Polyolefin Geomembranes

    D5747/D5747M Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids

    D5819 Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability

    D5885 Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry

    D5970 Standard Test Method for Deterioration of Geotextiles from Outdoor Exposure

    D6213 Standard Practice for Tests to Evaluate the Chemical Resistance of Geogrids to Liquids

    D6388 Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids

    D6389 Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids

    D6992 Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method

    D7238 Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus

    D7361 Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method

    D7406 Standard Test Method for Time-Dependent (Creep) Deformation Under Constant Pressure for Geosynthetic Drainage Products

    D7409 Standard Test Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns


    D35.03 - Permeability and Filtration

    D4491 Standard Test Methods for Water Permeability of Geotextiles by Permittivity

    D4716/D4716M Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head

    D4751 Standard Test Method for Determining Apparent Opening Size of a Geotextile

    D5101 Standard Test Method for Measuring the Filtration Compatibility of Soil-Geotextile Systems

    D5141 Standard Test Method for Determining Filtering Efficiency and Flow Rate of the Filtration Component of a Sediment Retention Device

    D5199 Standard Test Method for Measuring the Nominal Thickness of Geosynthetics

    D5493 Standard Test Method for Permittivity of Geotextiles Under Load

    D5567 Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems

    D6088 Standard Practice for Installation of Geocomposite Pavement Drains

    D6140 Standard Test Method to Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving for Full-Width Applications

    D6523 Standard Guide for Evaluation and Selection of Alternative Daily Covers (ADCs) for Sanitary Landfills

    D6574/D6574M Standard Test Method for Determining the (In-Plane) Hydraulic Transmissivity of a Geosynthetic by Radial Flow

    D6707 Standard Specification for Circular-Knit Geotextile for Use in Subsurface Drainage Applications

    D6767 Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test

    D6817/D6817M Standard Specification for Rigid Cellular Polystyrene Geofoam

    D6826 Standard Specification for Sprayed Slurries, Foams and Indigenous Materials Used As Alternative Daily Cover for Municipal Solid Waste Landfills

    D6917 Standard Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD)

    D6918 Standard Test Method for Testing Vertical Strip Drains in the Crimped Condition

    D7001 Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications

    D7008 Standard Specification for Geosynthetic Alternate Daily Covers

    D7178 Standard Practice for Determining the Number of Constrictions "m" of Non-Woven Geotextiles as a Complementary Filtration Property

    D7180/D7180M Standard Guide for Use of Expanded Polystyrene (EPS) Geofoam in Geotechnical Projects

    D7239 Standard Specification for Hybrid Geosynthetic Paving Mat for Highway Applications

    D7498/D7498M Standard Test Method for Vertical Strip Drains Using a Large Scale Consolidation Test

    D7557/D7557M Standard Practice for Sampling of Expanded Polystyrene Geofoam Specimens

    D7701 Standard Test Method for Determining the Flow Rate of Water and Suspended Solids from a Geotextile Bag

    D7880/D7880M Standard Test Method for Determining Flow Rate of Water and Suspended Solids Retention from a Closed Geosynthetic Bag


    D33.05 - Application and Surface Preparation

    D4227 Standard Practice for Qualification of Coating Applicators for Application of Coatings to Concrete Surfaces

    D4228 Standard Practice for Qualification of Coating Applicators for Application of Coatings to Steel Surfaces

    D4258 Standard Practice for Surface Cleaning Concrete for Coating

    D4259 Standard Practice for Abrading Concrete

    D4260 Standard Practice for Liquid and Gelled Acid Etching of Concrete

    D4261 Standard Practice for Surface Cleaning Concrete Masonry Units for Coating

    D4262 Standard Test Method for pH of Chemically Cleaned or Etched Concrete Surfaces

    D4263 Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method

    D4285 Standard Test Method for Indicating Oil or Water in Compressed Air

    D4286 Standard Practice for Determining Coating Contractor Qualifications for Nuclear Powered Electric Generation Facilities

    D5367 Standard Practice for Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used to Prevent Flash Rusting of Steel When Water or Water/Abrasive Blasted


    D20.24 - Plastic Building Products

    D1494 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels

    D3678 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions

    D3679 Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Siding

    D3841 Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels

    D4068 Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane

    D4226 Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products

    D4477 Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit

    D4495 Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight

    D4551 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane

    D4726 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors

    D4756 Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit

    D4803 Standard Test Method for Predicting Heat Buildup in PVC Building Products

    D5206 Standard Test Method for Windload Resistance of Rigid Plastic Siding

    D5319 Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels

    D5926 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems

    D6777 Standard Test Method for Relative Rigidity of Poly(Vinyl Chloride)(PVC) Siding

    D6864 Standard Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products

    D7082 Standard Specification for Polyethylene Stay In Place Form System for End Walls for Drainage Pipe

    D7251 Standard Specification for Color and Appearance Retention of Variegated Color Plastic Siding Products

    D7254 Standard Specification for Polypropylene (PP) Siding

    D7445 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding)

    D7793 Standard Specification for Insulated Vinyl Siding

    D7856 Standard Specification for Color and Appearance Retention of Solid and Variegated Color Plastic Siding Products using CIELab Color Space


    D20.23 - Reinforced Plastic Piping Systems and Chemical Equipment

    C581 Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service

    C582 Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment

    D2105 Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube

    D2143 Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe

    D2310 Standard Classification for Machine-Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

    D2517 Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings

    D2924 Standard Test Method for External Pressure Resistance of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

    D2925 Standard Test Method for Beam Deflection of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow

    D2992 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings

    D2996 Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

    D2997 Standard Specification for Centrifugally Cast "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

    D3262 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe

    D3299 Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks

    D3517 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe

    D3567 Standard Practice for Determining Dimensions of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings

    D3681 Standard Test Method for Chemical Resistance of “Fiberglass” (Glass–Fiber–Reinforced Thermosetting-Resin) Pipe in a Deflected Condition

    D3753 Standard Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells

    D3754 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe

    D3839 Standard Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting-Resin) Pipe

    D3840 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications

    D3982 Standard Specification for Contact Molded “Fiberglass” (Glass Fiber Reinforced Thermosetting Resin) Ducts

    D4024 Standard Specification for Machine Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges

    D4097 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks

    D4161 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals

    D4167 Standard Specification for Fiber-Reinforced Plastic Fans and Blowers

    D4398 Standard Test Method for Determining the Chemical Resistance of Fiberglass-Reinforced Thermosetting Resins by One-Side Panel Exposure

    D5364 Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced (FRP) Plastic Chimney Liners with Coal-Fired Units

    D5365 Standard Test Method for Long-Term Ring-Bending Strain of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

    D5421 Standard Specification for Contact Molded "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges

    D5677 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines

    D5685 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings

    D5813 Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems

    D6041 Standard Specification for Contact-Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings

    D6783 Standard Specification for Polymer Concrete Pipe


    D19.07 - Sediments, Geomorphology, and Open-Channel Flow

    D1941 Standard Test Method for Open Channel Flow Measurement of Water with the Parshall Flume

    D3858 Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method

    D3974 Standard Practices for Extraction of Trace Elements from Sediments

    D3975 Standard Practice for Development and Use (Preparation) of Samples for Collaborative Testing of Methods for Analysis of Sediments

    D3976 Standard Practice for Preparation of Sediment Samples for Chemical Analysis

    D3977 Standard Test Methods for Determining Sediment Concentration in Water Samples

    D4409 Standard Test Method for Velocity Measurements of Water in Open Channels with Rotating Element Current Meters

    D4410 Terminology for Fluvial Sediment

    D4411 Standard Guide for Sampling Fluvial Sediment in Motion

    D4698 Standard Practice for Total Digestion of Sediment Samples for Chemical Analysis of Various Metals

    D4822 Standard Guide for Selection of Methods of Particle Size Analysis of Fluvial Sediments (Manual Methods)

    D4823 Standard Guide for Core Sampling Submerged, Unconsolidated Sediments

    D5073 Standard Practice for Depth Measurement of Surface Water

    D5074 Standard Practice for Preparation of Natural-Matrix Sediment Reference Samples for Major and Trace Inorganic Constituents Analysis by Partial Extraction Procedures

    D5089 Standard Test Method for Velocity Measurements of Water in Open Channels with Electromagnetic Current Meters

    D5129 Standard Test Method for Open Channel Flow Measurement of Water Indirectly by Using Width Contractions

    D5130 Standard Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method

    D5242 Standard Test Method for Open-Channel Flow Measurement of Water with Thin-Plate Weirs

    D5243 Standard Test Method for Open-Channel Flow Measurement of Water Indirectly at Culverts

    D5258 Standard Practice for Acid-Extraction of Elements from Sediments Using Closed Vessel Microwave Heating

    D5387 Standard Guide for Elements of a Complete Data Set for Non-Cohesive Sediments

    D5388 Standard Test Method for Indirect Measurements of Discharge by Step-Backwater Method

    D5389 Standard Test Method for Open-Channel Flow Measurement by Acoustic Velocity Meter Systems

    D5390 Standard Test Method for Open-Channel Flow Measurement of Water with Palmer-Bowlus Flumes

    D5413 Standard Test Methods for Measurement of Water Levels in Open-Water Bodies

    D5541 Standard Practice for Developing a Stage-Discharge Relation for Open Channel Flow

    D5613 Standard Test Method for Open-Channel Measurement of Time of Travel Using Dye Tracers

    D5614 Standard Test Method for Open Channel Flow Measurement of Water with Broad-Crested Weirs

    D5640 Standard Guide for Selection of Weirs and Flumes for Open-Channel Flow Measurement of Water

    D5674 Standard Guide for Operation of a Gaging Station

    D5765 Standard Practice for Solvent Extraction of Total Petroleum Hydrocarbons from Soils and Sediments Using Closed Vessel Microwave Heating

    D5906 Standard Guide for Measuring Horizontal Positioning During Measurements of Surface Water Depths

    D6318 Standard Practice for Calibrating a Fathometer Using a Bar Check Method

    D6326 Standard Practice for The Selection of Maximum Transit-Rate Ratios and Depths for the U.S. Series of Isokinetic Suspended-Sediment Samplers

    D6764 Standard Guide for Collection of Water Temperature, Dissolved-Oxygen Concentrations, Specific Electrical Conductance, and pH Data from Open Channels

    D6855 Standard Test Method for Determination of Turbidity Below 5 NTU in Static Mode

    D7315 Standard Test Method for Determination of Turbidity Above 1 Turbidity Unit (TU) in Static Mode

    D7512 Standard Guide for Monitoring of Suspended-Sediment Concentration in Open Channel Flow Using Optical Instrumentation

    D7726 Standard Guide for The Use of Various Turbidimeter Technologies for Measurement of Turbidity in Water

    D7937 Standard Test Method for In-situ Determination of Turbidity Above 1 Turbidity Unit (TU) in Surface Water

    F660 Standard Practice for Comparing Particle Size in the Use of Alternative Types of Particle Counters


    D19.05 - Inorganic Constituents in Water

    D1067 Standard Test Methods for Acidity or Alkalinity of Water

    D1068 Standard Test Methods for Iron in Water

    D1126 Standard Test Method for Hardness in Water

    D1179 Standard Test Methods for Fluoride Ion in Water

    D1246 Standard Test Method for Bromide Ion in Water

    D1253 Standard Test Method for Residual Chlorine in Water

    D1292 Standard Test Method for Odor in Water

    D1426 Standard Test Methods for Ammonia Nitrogen In Water

    D1429 Standard Test Methods for Specific Gravity of Water and Brine

    D1687 Standard Test Methods for Chromium in Water

    D1688 Standard Test Methods for Copper in Water

    D1691 Standard Test Methods for Zinc in Water

    D1886 Standard Test Methods for Nickel in Water

    D1971 Standard Practices for Digestion of Water Samples for Determination of Metals by Flame Atomic Absorption, Graphite Furnace Atomic Absorption, Plasma Emission Spectroscopy, or Plasma Mass Spectrometry

    D1976 Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy

    D2972 Standard Test Methods for Arsenic in Water

    D3082 Standard Test Method for Boron in Water

    D3223 Standard Test Method for Total Mercury in Water

    D3352 Standard Test Method for Strontium Ion in Brackish Water, Seawater, and Brines

    D3372 Standard Test Method for Molybdenum in Water

    D3373 Standard Test Method for Vanadium in Water

    D3557 Standard Test Methods for Cadmium in Water

    D3558 Standard Test Methods for Cobalt in Water

    D3559 Standard Test Methods for Lead in Water

    D3561 Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry

    D3590 Standard Test Methods for Total Kjeldahl Nitrogen in Water

    D3645 Standard Test Methods for Beryllium in Water

    D3651 Standard Test Method for Barium in Brackish Water, Seawater, and Brines

    D3697 Standard Test Method for Antimony in Water

    D3859 Standard Test Methods for Selenium in Water

    D3866 Standard Test Methods for Silver in Water

    D3867 Standard Test Methods for Nitrite-Nitrate in Water

    D3868 Standard Test Method for Fluoride Ions in Brackish Water, Seawater, and Brines

    D3869 Standard Test Methods for Iodide and Bromide Ions in Brackish Water, Seawater, and Brines

    D3875 Standard Test Method for Alkalinity in Brackish Water, Seawater, and Brines

    D3919 Standard Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry

    D3920 Standard Test Method for Strontium in Water

    D3986 Standard Test Method for Barium in Brines, Seawater, and Brackish Water by Direct-Current Argon Plasma Atomic Emission Spectroscopy

    D4025 Standard Practice for Reporting Results of Examination and Analysis of Deposits Formed from Water for Subsurface Injection

    D4127 Standard Terminology Used with Ion-Selective Electrodes

    D4130 Standard Test Method for Sulfate Ion in Brackish Water, Seawater, and Brines

    D4190 Standard Test Method for Elements in Water by Direct-Current Argon Plasma Atomic Emission Spectroscopy

    D4191 Standard Test Method for Sodium in Water by Atomic Absorption Spectrophotometry

    D4192 Standard Test Method for Potassium in Water by Atomic Absorption Spectrophotometry

    D4309 Standard Practice for Sample Digestion Using Closed Vessel Microwave Heating Technique for the Determination of Total Metals in Water

    D4327 Standard Test Method for Anions in Water by Suppressed Ion Chromatography

    D4328 Standard Practice for Calculation of Supersaturation of Barium Sulfate, Strontium Sulfate, and Calcium Sulfate Dihydrate (Gypsum) in Brackish Water, Seawater, and Brines

    D4382 Standard Test Method for Barium in Water, Atomic Absorption Spectrophotometry, Graphite Furnace

    D4458 Standard Test Method for Chloride Ions in Brackish Water, Seawater, and Brines

    D4520 Standard Practice for Determining Water Injectivity Through the Use of On-Site Floods

    D4638 Standard Guide for Preparation of Biological Samples for Inorganic Chemical Analysis

    D4658 Standard Test Method for Sulfide Ion in Water

    D4691 Standard Practice for Measuring Elements in Water by Flame Atomic Absorption Spectrophotometry

    D511 Standard Test Methods for Calcium and Magnesium In Water

    D512 Standard Test Methods for Chloride Ion In Water

    D513 Standard Test Methods for Total and Dissolved Carbon Dioxide in Water

    D516 Standard Test Method for Sulfate Ion in Water

    D5257 Standard Test Method for Dissolved Hexavalent Chromium in Water by Ion Chromatography

    D5463 Standard Guide for Use of Test Kits to Measure Inorganic Constituents in Water

    D5673 Standard Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectrometry

    D5907 Standard Test Methods for Filterable Matter (Total Dissolved Solids) and Nonfilterable Matter (Total Suspended Solids) in Water

    D6501 Standard Test Method for Phosphonate in Brines

    D6508 Standard Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte

    D6581 Standard Test Methods for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Suppressed Ion Chromatography

    D6800 Standard Practice for Preparation of Water Samples Using Reductive Precipitation Preconcentration Technique for ICP-MS Analysis of Trace Metals

    D6850 Standard Guide for QC of Screening Methods in Water

    D6919 Standard Test Method for Determination of Dissolved Alkali and Alkaline Earth Cations and Ammonium in Water and Wastewater by Ion Chromatography

    D6994 Standard Test Method for Determination of Metal Cyanide Complexes in Wastewater, Surface Water, Groundwater and Drinking Water Using Anion Exchange Chromatography with UV Detection

    D7781 Standard Test Method for Nitrite-Nitrate in Water by Nitrate Reductase

    D7980 Standard Guide for Ion-Chromatographic Analysis of Anions in Grab Samples of Ultrapure Water (UPW) in the Semiconductor Industry

    D857 Standard Test Method for Aluminum in Water

    D858 Standard Test Methods for Manganese in Water

    D859 Standard Test Method for Silica in Water

    D888 Standard Test Methods for Dissolved Oxygen in Water


    D18.25 - Erosion and Sediment Control Technology

    D6449 Standard Test Method for Flow of Fine Aggregate Concrete for Fabric Formed Concrete (Flow Cone Method)

    D6459 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion

    D6460 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion

    D6461 Standard Specification for Silt Fence Materials

    D6462 Standard Practice for Silt Fence Installation

    D6599 Standard Practice for Construction of Live Fascines on Slopes

    D6684 Standard Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Revetment Systems

    D6685 Standard Guide for the Selection of Test Methods for Fabrics Used for Fabric Formed Concrete (FFC)

    D6711 Standard Practice for Specifying Rock to Fill Gabions, Revet Mattresses, and Gabion Mattresses

    D6765 Standard Practice for Live Staking

    D6884 Standard Practice for Installation of Articulating Concrete Block (ACB) Revetment Systems

    D7014 Standard Practice for Assembly and Placement of Double-Twisted Wire Mesh Gabions and Revet Mattresses

    D7047 Standard Test Method for Mucilloid Content of Plantago Insularis (Ovata, Psyllium)

    D7101 Standard Index Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Soil from Rain Splash and Associated Runoff Under Bench-Scale Conditions

    D7208 Standard Test Method for Determination of Temporary Ditch Check Performance in Protecting Earthen Channels from Stormwater-Induced Erosion

    D7276 Standard Guide for Analysis and Interpretation of Test Data for Articulating Concrete Block (ACB) Revetment Systems in Open Channel Flow

    D7277 Standard Test Method for Performance Testing of Articulating Concrete Block (ACB) Revetment Systems for Hydraulic Stability in Open Channel Flow

    D7322 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Ability to Encourage Seed Germination and Plant Growth Under Bench-Scale Conditions

    D7351 Standard Test Method for Determination of Sediment Retention Device Effectiveness in Sheet Flow Applications

    D7367 Standard Test Method for Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting


    D18.24 - Characterization and Handling of Powders and Bulk Solids

    D6128 Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Cell

    D6393 Standard Test Method for Bulk Solids Characterization by Carr Indices

    D6682 Standard Test Method for Measuring Shear Stresses of Powders Using Peschl Rotational Split Level Shear Tester

    D6683 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress

    D6773 Standard Shear Test Method for Bulk Solids Using the Schulze Ring Shear Tester

    D6940 Standard Practice for Measuring Sifting Segregation Tendencies of Bulk Solids

    D6941 Standard Practice for Measuring Fluidization Segregation Tendencies of Powders

    D7481 Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder

    D7743 Standard Test Method for Measuring the Minimum Fluidization Velocities of Free Flowing Powders

    D7891 Standard Test Method for Shear Testing of Powders Using the Freeman Technology FT4 Powder Rheometer Shear Cell


    D18.21 - Groundwater and Vadose Zone Investigations

    D3404 Standard Guide for Measuring Matric Potential in Vadose Zone Using Tensiometers

    D4043 Standard Guide for Selection of Aquifer Test Method in Determining Hydraulic Properties by Well Techniques

    D4044 Standard Test Method for (Field Procedure) for Instantaneous Change in Head (Slug) Tests for Determining Hydraulic Properties of Aquifers

    D4050 Standard Test Method for (Field Procedure) for Withdrawal and Injection Well Testing for Determining Hydraulic Properties of Aquifer Systems

    D4104 Standard Test Method (Analytical Procedure) for Determining Transmissivity of Nonleaky Confined Aquifers by Overdamped Well Response to Instantaneous Change in Head (Slug Tests)

    D4105 Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Modified Theis Nonequilibrium Method

    D4106 Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Theis Nonequilibrium Method

    D4630 Standard Test Method for Determining Transmissivity and Storage Coefficient of Low-Permeability Rocks by In Situ Measurements Using the Constant Head Injection Test

    D4631 Standard Test Method for Determining Transmissivity and Storativity of Low Permeability Rocks by In Situ Measurements Using Pressure Pulse Technique

    D4696 Standard Guide for Pore-Liquid Sampling from the Vadose Zone

    D4700 Standard Guide for Soil Sampling from the Vadose Zone

    D5088 Standard Practice for Decontamination of Field Equipment Used at Waste Sites

    D5092 Standard Practice for Design and Installation of Groundwater Monitoring Wells

    D5126/D5126M Standard Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in Vadose Zone

    D5254/D5254M Standard Practice for Minimum Set of Data Elements to Identify a Groundwater Site

    D5269 Standard Test Method for Determining Transmissivity of Nonleaky Confined Aquifers by the Theis Recovery Method

    D5270 Standard Test Method for Determining Transmissivity and Storage Coefficient of Bounded, Nonleaky, Confined Aquifers

    D5299 Standard Guide for Decommissioning of Groundwater Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities

    D5314 Standard Guide for Soil Gas Monitoring in the Vadose Zone

    D5408 Standard Guide for Set of Data Elements to Describe a Groundwater Site; Part One - Additional Identification Descriptors

    D5409/D5409M Standard Guide for Set of Data Elements to Describe a Groundwater Site; Part Two - Physical Descriptors

    D5410 Standard Guide for Set of Data Elements to Describe a Groundwater Site; Part Three - Usage Descriptors

    D5447 Standard Guide for Application of a Groundwater Flow Model to a Site-Specific Problem

    D5472/D5472M Standard Test Method for Determining Specific Capacity and Estimating Transmissivity at the Control Well

    D5473 Standard Test Method for (Analytical Procedure for) Analyzing the Effects of Partial Penetration of Control Well and Determining the Horizontal and Vertical Hydraulic Conductivity in a Nonleaky Confined Aquifer

    D5474 Standard Guide for Selection of Data Elements for Groundwater Investigations

    D5490 Standard Guide for Comparing Groundwater Flow Model Simulations to Site-Specific Information

    D5521/D5521M Standard Guide for Development of Groundwater Monitoring Wells in Granular Aquifers

    D5608 Standard Practices for Decontamination of Field Equipment Used at Low Level Radioactive Waste Sites

    D5609 Standard Guide for Defining Boundary Conditions in Groundwater Flow Modeling

    D5610 Standard Guide for Defining Initial Conditions in Groundwater Flow Modeling

    D5611 Standard Guide for Conducting a Sensitivity Analysis for a Groundwater Flow Model Application

    D5716 Standard Test Method for Measuring the Rate of Well Discharge by Circular Orifice Weir

    D5718 Standard Guide for Documenting a Groundwater Flow Model Application

    D5719 Standard Guide for Simulation of Subsurface Airflow Using Groundwater Flow Modeling Codes

    D5737/D5737M Standard Guide for Methods for Measuring Well Discharge

    D5781/D5781M Standard Guide for Use of Dual-Wall Reverse-Circulation Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices

    D5782 Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices

    D5783 Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices

    D5784/D5784M Standard Guide for Use of Hollow-Stem Augers for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices

    D5785 Standard Test Method for (Analytical Procedure) for Determining Transmissivity of Confined Nonleaky Aquifers by Underdamped Well Response to Instantaneous Change in Head (Slug Test)

    D5786 Standard Practice for (Field Procedure) for Constant Drawdown Tests in Flowing Wells for Determining Hydraulic Properties of Aquifer Systems

    D5787 Standard Practice for Monitoring Well Protection

    D5850 Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells

    D5855 Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in Flowing Well

    D5872/D5872M Standard Guide for Use of Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices

    D5875/D5875M Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices

    D5876 Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices

    D5881 Standard Test Method for (Analytical Procedure) Determining Transmissivity of Confined Nonleaky Aquifers by Critically Damped Well Response to Instantaneous Change in Head (Slug)

    D5903 Standard Guide for Planning and Preparing for a Groundwater Sampling Event

    D5911/D5911M Standard Practice for Minimum Set of Data Elements to Identify a Soil Sampling Site

    D5920 Standard Test Method [Analytical Procedure] for Tests of Anisotropic Unconfined Aquifers by Neuman Method

    D5978 Standard Guide for Maintenance and Rehabilitation of Groundwater Monitoring Wells

    D5979 Standard Guide for Conceptualization and Characterization of Groundwater Systems

    D5980 Standard Guide for Selection and Documentation of Existing Wells for Use in Environmental Site Characterization and Monitoring

    D5981 Standard Guide for Calibrating a Groundwater Flow Model Application

    D6000 Standard Guide for Presentation of Water-Level Information from Groundwater Sites

    D6001 Standard Guide for Direct-Push Groundwater Sampling for Environmental Site Characterization

    D6025 Standard Guide for Developing and Evaluating Groundwater Modeling Codes

    D6028 Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer Taking into Consideration Storage of Water in Leaky Confining Beds by Modified Hantush Method

    D6029 Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer and a Leaky Confining Bed with Negligible Storage by the Hantush-Jacob Method

    D6030 Standard Guide for Selection of Methods for Assessing Groundwater or Aquifer Sensitivity and Vulnerability

    D6031/D6031M Standard Test Method for Logging In Situ Moisture Content and Density of Soil and Rock by the Nuclear Method in Horizontal, Slanted, and Vertical Access Tubes

    D6033 Standard Guide for Describing the Functionality of a Groundwater Modeling Code

    D6034 Standard Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test

    D6036 Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements—Use of Maps

    D6067 Standard Practice for Using the Electronic Piezocone Penetrometer Tests for Environmental Site Characterization

    D6089 Standard Guide for Documenting a Groundwater Sampling Event

    D6106 Standard Guide for Establishing Nomenclature of Groundwater Aquifers

    D6168 Standard Guide for Selection of Minimum Set of Data Elements Required to Identify Locations Chosen for Field Collection of Information to Describe Soil, Rock, and Their Contained Fluids

    D6169/D6169M Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations

    D6170 Standard Guide for Selecting a Groundwater Modeling Code

    D6171 Standard Guide for Documenting a Groundwater Modeling Code

    D6187 Standard Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence

    D6282/D6282M Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations

    D6285 Standard Guide for Locating Abandoned Wells

    D6286 Standard Guide for Selection of Drilling Methods for Environmental Site Characterization

    D6312 Standard Guide for Developing Appropriate Statistical Approaches for Groundwater Detection Monitoring Programs

    D6452 Standard Guide for Purging Methods for Wells Used for Groundwater Quality Investigations

    D6517 Standard Guide for Field Preservation of Groundwater Samples

    D6564 Standard Guide for Field Filtration of Groundwater Samples

    D6634/D6634M Standard Guide for the Selection of Purging and Sampling Devices for Groundwater Monitoring Wells

    D6642 Standard Guide for Comparison of Techniques to Quantify the Soil-Water (Moisture) Flux

    D6724 Standard Guide for Installation of Direct Push Groundwater Monitoring Wells

    D6725 Standard Practice for Direct Push Installation of Prepacked Screen Monitoring Wells in Unconsolidated Aquifers

    D6911 Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis

    D6914 Standard Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices

    D7045 Standard Guide for Optimization of Groundwater Monitoring Constituents for Detection Monitoring Programs for RCRA Waste Disposal Facilities

    D7048 Standard Guide for Applying Statistical Methods for Assessment and Corrective Action Environmental Monitoring Programs

    D7069 Standard Guide for Field Quality Assurance in a Groundwater Sampling Event

    D7242/D7242M Standard Practice for Field Pneumatic Slug (Instantaneous Change in Head) Tests to Determine Hydraulic Properties of Aquifers with Direct Push Groundwater Samplers

    D7262 Standard Test Method for Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids

    D7352 Standard Practice for Direct Push Technology for Volatile Contaminant Logging with the Membrane Interface Probe (MIP)

    D7626 Standard Test Methods for Determining the Organic Treat Loading of Organophilic Clay

    D7648 Standard Practice for Active Soil Gas Sampling for Direct Push or Manual-Driven Hand-Sampling Equipment

    D7663 Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations

    D7758 Standard Practice for Passive Soil Gas Sampling in the Vadose Zone for Source Identification, Spatial Variability Assessment, Monitoring, and Vapor Intrusion Evaluations


    D18.19 - Frozen Soils and Rock

    D4083 Standard Practice for Description of Frozen Soils (Visual-Manual Procedure)

    D5520 Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression

    D5780 Standard Test Method for Individual Piles in Permafrost Under Static Axial Compressive Load

    D5918 Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils

    D6035/D6035M Standard Test Method for Determining the Effect of Freeze-Thaw on Hydraulic Conductivity of Compacted or Intact Soil Specimens Using a Flexible Wall Permeameter

    D7099 Standard Terminology Relating to Frozen Soil and Rock

    D7300 Standard Test Method for Laboratory Determination of Strength Properties of Frozen Soil at a Constant Rate of Strain


    D18.17 - Rock for Erosion Control

    D4992 Standard Practice for Evaluation of Rock to be Used for Erosion Control

    D5121 Standard Practice for Preparation of Rock Slabs for Durability Testing

    D5240/D5240M Standard Test Method for Evaluation of Durability of Rock for Erosion Control Using Sodium Sulfate or Magnesium Sulfate

    D5312/D5312M Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Freezing and Thawing Conditions

    D5313/D5313M Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Wetting and Drying Conditions

    D5519 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials

    D5779/D5779M Standard Test Method for Field Determination of Apparent Specific Gravity of Rock and Manmade Materials for Erosion Control

    D6092 Standard Practice for Specifying Standard Sizes of Stone for Erosion Control

    D6473 Standard Test Method for Specific Gravity and Absorption of Rock For Erosion Control

    D6825 Standard Guide for Placement of Riprap Revetments


    D18.15 - Stabilization With Admixtures

    D1411 Standard Test Methods for Water-Soluble Chlorides Present as Admixtures in Graded Aggregate Road Mixes

    D1632 Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory

    D1633 Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders

    D1634 Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)

    D1635/D1635M Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading

    D3155 Standard Test Method for Lime Content of Uncured Soil-Lime Mixtures

    D3551 Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using Mechanical Mixer

    D3877 Standard Test Methods for One-Dimensional Expansion, Shrinkage, and Uplift Pressure of Soil-Lime Mixtures

    D4016 Standard Test Method for Viscosity and Gel Time of Chemical Grouts by Rotational Viscometer (Laboratory Method)

    D4219 Standard Test Method for Unconfined Compressive Strength Index of Chemical- Grouted Soils

    D4223/D4223M Standard Practice for Preparation of Test Specimens of Asphalt-Stabilized Soils

    D4320/D4320M Standard Practice for Laboratory Preparation of Chemically Grouted Soil Specimens for Obtaining Engineering Parameters

    D4609 Standard Guide for Evaluating Effectiveness of Admixtures for Soil Stabilization

    D4832 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders

    D5102 Standard Test Method for Unconfined Compressive Strength of Compacted Soil-Lime Mixtures

    D5202 Standard Test Method for Determining Triaxial Compression Creep Strength of Chemical Grouted Soils

    D5239 Standard Practice for Characterizing Fly Ash for Use in Soil Stabilization

    D558 Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures

    D5971/D5971M Standard Practice for Sampling Freshly Mixed Controlled Low-Strength Material

    D5982 Standard Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method)

    D6023 Standard Test Method for Density (Unit Weight), Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)

    D6024 Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application

    D6236 Standard Guide for Coring and Logging Cement - or Lime-Stabilized Soil

    D6276 Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization

    D806 Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures


    D18.12 - Rock Mechanics

    D2845 Standard Test Method for Laboratory Determination of Pulse Velocities and Ultrasonic Elastic Constants of Rock

    D2936 Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens

    D3967 Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens

    D4394 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Rigid Plate Loading Method

    D4395 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Flexible Plate Loading Method

    D4435 Standard Test Method for Rock Bolt Anchor Pull Test

    D4436 Standard Test Method for Rock Bolt Long-Term Load Retention Test

    D4506 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Radial Jacking Test

    D4525 Standard Test Method for Permeability of Rocks by Flowing Air

    D4535 Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer

    D4543 Standard Practices for Preparing Rock Core as Cylindrical Test Specimens and Verifying Conformance to Dimensional and Shape Tolerances

    D4553 Standard Test Method for Determining In Situ Creep Characteristics of Rock

    D4554 Standard Test Method for In Situ Determination of Direct Shear Strength of Rock Discontinuities

    D4555 Standard Test Method for Determining Deformability and Strength of Weak Rock by an In Situ Uniaxial Compressive Test

    D4611 Standard Test Method for Specific Heat of Rock and Soil

    D4612 Standard Practice for Calculating Thermal Diffusivity of Rocks

    D4623 Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method—USBM Borehole Deformation Gauge

    D4644 Standard Test Method for Slake Durability of Shales and Similar Weak Rocks

    D4645 Standard Test Method for Determination of In-Situ Stress in Rock Using Hydraulic Fracturing Method

    D4729 Standard Test Method for In Situ Stress and Modulus of Deformation Using Flatjack Method

    D4879 Standard Guide for Geotechnical Mapping of Large Underground Openings in Rock

    D4971 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Using Diametrically Loaded 76-mm (3-in.) Borehole Jack

    D5079 Standard Practices for Preserving and Transporting Rock Core Samples

    D5334 Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure

    D5335 Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges

    D5607 Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force

    D5731 Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications

    D5873 Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method

    D5878 Standard Guides for Using Rock-Mass Classification Systems for Engineering Purposes

    D6032 Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core

    D7012 Standard Test Methods for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures

    D7070 Standard Test Methods for Creep of Rock Core Under Constant Stress and Temperature

    D7401 Standard Test Methods for Laboratory Determination of Rock Anchor Capacities by Pull and Drop Tests

    D7625 Standard Test Method for Laboratory Determination of Abrasiveness of Rock Using the CERCHAR Method


    D18.11 - Deep Foundations

    D1143/D1143M Standard Test Methods for Deep Foundations Under Static Axial Compressive Load

    D3689/D3689M Standard Test Methods for Deep Foundations Under Static Axial Tensile Load

    D3966/D3966M Standard Test Methods for Deep Foundations Under Lateral Load

    D4945 Standard Test Method for High-Strain Dynamic Testing of Deep Foundations

    D5882 Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations

    D6760 Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing

    D7383 Standard Test Methods for Axial Compressive Force Pulse (Rapid) Testing of Deep Foundations

    D7949 Standard Test Methods for Thermal Integrity Profiling of Concrete Deep Foundations


    D18.08 - Special and Construction Control Tests

    D1241 Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses

    D1556/D1556M Standard Test Method for Density and Unit Weight of Soil in Place by Sand-Cone Method

    D1558 Standard Test Method for Moisture Content Penetration Resistance Relationships of Fine-Grained Soils

    D2167 Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method

    D2844/D2844M Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils

    D2937 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method

    D4429 Standard Test Method for CBR (California Bearing Ratio) of Soils in Place

    D4643 Standard Test Method for Determination of Water (Moisture) Content of Soil by Microwave Oven Heating

    D4914 Standard Test Methods for Density and Unit Weight of Soil and Rock in Place by the Sand Replacement Method in a Test Pit

    D4944 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester

    D4959 Standard Test Method for Determination of Water (Moisture) Content of Soil By Direct Heating

    D5030/D5030M Standard Test Methods for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit

    D5080 Standard Test Method for Rapid Determination of Percent Compaction

    D5195 Standard Test Method for Density of Soil and Rock In-Place at Depths Below Surface by Nuclear Methods

    D5220 Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method

    D5874 Standard Test Method for Determination of the Impact Value (IV) of a Soil

    D6758 Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method

    D6780/D6780M Standard Test Method for Water Content and Density of Soil In situ by Time Domain Reflectometry (TDR)

    D6938 Standard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)

    D7013/D7013M Standard Guide for Calibration Facility Setup for Nuclear Surface Gauges

    D7380 Standard Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer

    D7698 Standard Test Method for In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method

    D7759/D7759M Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration

    D7830/D7830M Standard Test Method for In-Place Density (Unit Weight) and Water Content of Soil Using an Electromagnetic Soil Density Gauge


    D18.06 - Physical-Chemical Interactions of Soil and Rock

    D4221 Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer

    D4373 Standard Test Method for Rapid Determination of Carbonate Content of Soils

    D4404 Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry

    D4542 Standard Test Method for Pore Water Extraction and Determination of the Soluble Salt Content of Soils by Refractometer

    D4647/D4647M Standard Test Methods for Identification and Classification of Dispersive Clay Soils by the Pinhole Test

    D5143 Standard Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by High Performance Liquid Chromatography

    D6572 Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test


    D18.05 - Strength and Compressibility of Soils

    D1883 Standard Test Method for California Bearing Ratio (CBR) of Laboratory-Compacted Soils

    D2166/D2166M Standard Test Method for Unconfined Compressive Strength of Cohesive Soil

    D2435/D2435M Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading

    D2850 Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils

    D3080/D3080M Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions

    D4186/D4186M Standard Test Method for One-Dimensional Consolidation Properties of Saturated Cohesive Soils Using Controlled-Strain Loading

    D4546 Standard Test Methods for One-Dimensional Swell or Collapse of Soils

    D4648/D4648M Standard Test Method for Laboratory Miniature Vane Shear Test for SaturatedFine-Grained Clayey Soil

    D4767 Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils

    D4829 Standard Test Method for Expansion Index of Soils

    D6467 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils

    D6528 Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Cohesive Soils

    D7181 Method for Consolidated Drained Triaxial Compression Test for Soils

    D7608 Standard Test Method for Torsional Ring Shear Test to Determine Drained Fully Softened Shear Strength and Nonlinear Strength Envelope of Cohesive Soils (Using Normally Consolidated Specimen) for Slopes with No Preexisting Shear Surfaces


    D18.04 - Hydrologic Properties and Hydraulic Barriers

    D3385 Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer

    D4380 Standard Test Method for Density of Bentonitic Slurries

    D4381/D4381M Standard Test Method for Sand Content by Volume of Bentonitic Slurries

    D4511 Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat

    D5084 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter

    D5093 Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring

    D5298 Standard Test Method for Measurement of Soil Potential (Suction) Using Filter Paper

    D5856 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter

    D6391 Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration

    D6527 Standard Test Method for Determining Unsaturated and Saturated Hydraulic Conductivity in Porous Media by Steady-State Centrifugation

    D6539 Standard Test Method for Measurement of the Permeability of Unsaturated Porous Materials by Flowing Air

    D6836 Standard Test Methods for Determination of the Soil Water Chararcteristic Curve for Desorption Using a Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, and/or Centrifuge

    D6910/D6910M Standard Test Method for Marsh Funnel Viscosity of Clay Construction Slurries

    D7100 Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions

    D7243 Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges

    D7503 Standard Test Method for Measuring the Exchange Complex and Cation Exchange Capacity of Inorganic Fine-Grained Soils

    D7664 Standard Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils


    D18.01.03 - Geospatial Technology


    D18.02 - Sampling and Related Field Testing for Soil Evaluations

    D1452 Standard Practice for Soil Exploration and Sampling by Auger Borings

    D1586 Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils

    D1587 Standard Practice for Thin-Walled Tube Sampling of Soils for Geotechnical Purposes

    D2113 Standard Practice for Rock Core Drilling and Sampling of Rock for Site Exploration

    D2573 Standard Test Method for Field Vane Shear Test in Cohesive Soil

    D3213 Standard Practices for Handling, Storing, and Preparing Soft Intact Marine Soil

    D3550 Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils

    D4220/D4220M Standard Practices for Preserving and Transporting Soil Samples

    D4633 Standard Test Method for Energy Measurement for Dynamic Penetrometers

    D4719 Standard Test Methods for Prebored Pressuremeter Testing in Soils

    D5434 Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock

    D5778 Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils

    D5852 Standard Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the Jet Index Method

    D6066 Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential

    D6151 Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling

    D6519 Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler

    D6635 Standard Test Method for Performing the Flat Plate Dilatometer

    D7015 Standard Practices for Obtaining Intact Block (Cubical and Cylindrical) Samples of Soils


    D18.03 - Texture, Plasticity and Density Characteristics of Soils

    D1140 Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing

    D1557 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))

    D2168 Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors

    D2216 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass

    D421 Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants

    D422 Standard Test Method for Particle-Size Analysis of Soils

    D425 Standard Test Method for Centrifuge Moisture Equivalent of Soils

    D4253 Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table

    D4254 Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density

    D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils

    D4718 Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles

    D4943 Standard Test Method for Shrinkage Factors of Soils by the Wax Method

    D5550 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer

    D6913 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis

    D698 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))

    D7263 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens

    D7382 Standard Test Methods for Determination of Maximum Dry Unit Weight and Water Content Range for Effective Compaction of Granular Soils Using a Vibrating Hammer

    D854 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer


    D18.01 - Surface and Subsurface Characterization

    D5753 Standard Guide for Planning and Conducting Borehole Geophysical Logging

    D5777 Standard Guide for Using the Seismic Refraction Method for Subsurface Investigation

    D5879 Standard Practice for Surface Site Characterization for On-Site Septic Systems

    D5921 Standard Practice for Subsurface Site Characterization of Test Pits for On-Site Septic Systems

    D5922 Standard Guide for Analysis of Spatial Variation in Geostatistical Site Investigations

    D5923 Standard Guide for Selection of Kriging Methods in Geostatistical Site Investigations

    D5924 Standard Guide for Selection of Simulation Approaches in Geostatistical Site Investigations

    D5995 Standard Guide for Environmental Site Characterization in Cold Regions

    D6167 Standard Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper

    D6235 Standard Practice for Expedited Site Characterization of Vadose Zone and Groundwater Contamination at Hazardous Waste Contaminated Sites

    D6274 Standard Guide for Conducting Borehole Geophysical Logging - Gamma

    D6429 Standard Guide for Selecting Surface Geophysical Methods

    D6430 Standard Guide for Using the Gravity Method for Subsurface Investigation

    D6431 Standard Guide for Using the Direct Current Resistivity Method for Subsurface Investigation

    D6432 Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation

    D6639 Standard Guide for Using the Frequency Domain Electromagnetic Method for Subsurface Investigations

    D6726 Standard Guide for Conducting Borehole Geophysical Logging - Electromagnetic Induction

    D6727 Standard Guide for Conducting Borehole Geophysical Logging - Neutron

    D6820 Standard Guide for Use of the Time Domain Electromagnetic Method for Subsurface Investigation

    D7046 Standard Guide for Use of the Metal Detection Method for Subsurface Exploration

    D7128 Standard Guide for Using the Seismic-Reflection Method for Shallow Subsurface Investigation

    D7458 Standard Test Method for Determination of Beryllium in Soil, Rock, Sediment, and Fly Ash Using Ammonium Bifluoride Extraction and Fluorescence Detection

    D7699/D7699M Standard Practice for Minimum Geospatial Data for Abandoned Mine Land Problem Areas, Planning Units, Keyword Features, and Project Sites

    D7780 Standard Practice for Geospatial Data for Representing Coal Mining Features


    D14.70 - Construction Adhesives

    C557 Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing

    D1779 Standard Specification for Adhesive for Acoustical Materials

    D1995 Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives)

    D3498 Standard Specification for Adhesives for Field-Gluing Plywood to Lumber Framing for Floor Systems

    D3632 Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method

    D3930 Standard Specification for Adhesives for Wood-Based Materials for Construction of Manufactured Homes

    D3931 Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading

    D3983 Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen

    D4027 Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test

    D4502 Standard Test Method for Heat and Moisture Resistance of Wood-Adhesive Joints

    D5215 Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives

    D5574 Standard Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints

    D6004 Standard Test Method for Determining Adhesive Shear Strength of Carpet Adhesives

    D6005 Standard Test Method for Determining Slump Resistance of Carpet Adhesives

    D6325 Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives

    D6464 Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing

    D7446 Standard Specification for Structural Insulated Panel (SIP) Adhesives for Laminating Oriented Strand Board (OSB) to Rigid Cellular Polystryene Thermal Insulation Core Materials

    D7799 Standard Specification for Tufted and Woven Broadloom Carpet Adhesives Without Homogenous PVC or Non-PVC Backings


    D08.22 - Waterproofing and Dampproofing Systems

    C1305 Standard Test Method for Crack Bridging Ability of Liquid-Applied Waterproofing Membrane

    C1306 Standard Test Method for Hydrostatic Pressure Resistance of a Liquid-Applied Waterproofing Membrane

    C1471/C1471M Standard Guide for the Use of High Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane on Vertical Surfaces

    C1522 Standard Test Method for Extensibility After Heat Aging of Cold Liquid-Applied Elastomeric Waterproofing Membranes

    C836/C836M Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course

    C898/C898M Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Separate Wearing Course

    C981 Standard Guide for Design of Built-Up Bituminous Membrane Waterproofing Systems for Building Decks

    D5295/D5295M Standard Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems

    D5385/D5385M Standard Test Method for Hydrostatic Pressure Resistance of Waterproofing Membranes

    D5843/D5843M Standard Guide for Application of Fully Adhered Vulcanized Rubber Sheets Used in Waterproofing

    D5898/D5898M Standard Guide for Standard Details for Adhered Sheet Waterproofing

    D5957 Standard Guide for Flood Testing Horizontal Waterproofing Installations

    D6451/D6451M Standard Guide for Application of Asphalt Based Protection Board

    D6506 Standard Specification for Asphalt Based Protection for Below-Grade Waterproofing

    D6622 Standard Guide for Application of Fully Adhered Hot-Applied Reinforced Waterproofing Systems

    D6769/D6769M Standard Guide for Application of Fully Adhered, Cold-Applied, Prefabricated Reinforced Modified Bituminous Membrane Waterproofing Systems

    D6950/D6950M Standard Practice for Application of Heat Weldable Atactic Polypropylene (APP) Modified Bituminous Waterproofing Membranes Systems for New Building Decks

    D7492/D7492M Standard Guide for Use of Drainage System Media with Waterproofing Systems

    D7693/D7693M Standard Guide for Application of Heat Weldable Modified Bituminous Waterproofing Membranes Systems for New Concrete Decks

    D7832/D7832M Standard Guide for Performance Attributes of Waterproofing Membranes Applied to Below-Grade Walls / Vertical Surfaces (Enclosing Interior Spaces)

    D7877 Standard Guide for Electronic Methods for Detecting and Locating Leaks in Waterproof Membranes


    D14.30 - Wood Adhesives

    D1101 Standard Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use

    D1488 Standard Test Method for Amylaceous Matter in Adhesives

    D1490 Standard Test Method for Nonvolatile Content of Urea-Formaldehyde Resin Solutions

    D1579 Standard Test Method for Filler Content of Phenol, Resorcinol, and Melamine Adhesives

    D1582 Standard Test Method for Nonvolatile Content of Liquid Phenol, Resorcinol, and Melamine Adhesives

    D1583 Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films

    D2339 Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading

    D2559 Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions

    D3434 Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives

    D3535 Standard Test Method for Resistance to Creep Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior Exposure Conditions

    D4300 Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi

    D4317 Standard Specification for Polyvinyl Acetate-Based Emulsion Adhesives

    D4426 Standard Test Method for Determination of Percent Nonvolatile Content of Liquid Phenolic Resins Used for Wood Laminating

    D4680 Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)

    D4688/D4688M Standard Test Method for Evaluating Structural Adhesives for Finger Jointing Lumber

    D4689 Standard Specification for Adhesive, Casein-Type

    D4690 Standard Specification for Urea-Formaldehyde Resin Adhesives

    D4783 Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi

    D5266 Standard Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints

    D5572 Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products

    D5751 Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products

    D5824 Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water

    D7247 Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures

    D7966/D7966M Standard Test Method for Resistance to Creep of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)

    D905 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading

    D906 Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading


    D08.20 - Roofing Membrane Systems

    D2523 Standard Practice for Testing Load-Strain Properties of Roofing Membranes

    D2829 Standard Practice for Sampling and Analysis of Existing Built-Up Roof Systems

    D3617 Standard Practice for Sampling and Analysis of Built-Up Roof Systems During Application

    D3746 Standard Test Method for Impact Resistance of Bituminous Roofing Systems

    D4073 Standard Test Method for Tensile-Tear Strength of Bituminous Roofing Membranes

    D4074/D4074M Standard Test Method for Bitumen and Aggregate Content of Bitumen-Aggregate Mixtures From Roofing Samples

    D4932/D4932M Standard Test Method for Fastener Rupture and Tear Resistance of Roofing and Waterproofing Sheets, Roll Roofing, and Shingles

    D5076/D5076M Standard Test Method for Measuring Voids in Roofing and Waterproofing Membranes

    D5602/D5602M Standard Test Method for Static Puncture Resistance of Roofing Membrane Specimens

    D5635/D5635M Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens

    D5636/D5636M Standard Test Method for Low Temperature Unrolling of Felt or Sheet Roofing and Waterproofing Materials

    D5683/D5683M Standard Test Method for Flexibility of Roofing and Waterproofing Materials and Membranes

    D6294/D6294M Standard Test Method for Corrosion Resistance of Ferrous Metal Fastener Assemblies Used in Roofing and Waterproofing

    D6382/D6382M Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material

    D6510 Standard Guide for Selection of Asphalt Used in Built-Up Roofing Systems

    D6630 Standard Guide for Low Slope Insulated Roof Membrane Assembly Performance

    D7053/D7053M Standard Guide for Determining and Evaluating Causes of Water Leakage of Low-Sloped Roofs

    D7105 Standard Test Method for Determining the Adhesive and Cohesive Strength Between Materials in Roofing or Waterproofing Membranes and Systems

    D7120/D7120M Standard Guide for Evaluation and Preparation of Roof Membranes for Coating Application

    D7186 Standard Practice for Quality Assurance Observation of Roof Construction and Repair

    D7281 Standard Test Method for Determining Water Migration Resistance Through Roof Membranes

    D7586/D7586M Standard Test Method for Quantification of Air Intrusion in Low-Sloped Mechanically Attached Membrane Roof Assemblies

    D7636/D7636M Standard Practice for Sampling and Analysis of Modified Bitumen Roof Systems

    D7655/D7655M Standard Classification for Size of Aggregate Used as Ballast for Membrane Roof Systems

    D7897 Standard Practice for Laboratory Soiling and Weathering of Roofing Materials to Simulate Effects of Natural Exposure on Solar Reflectance and Thermal Emittance

    D7954/D7954M Standard Practice for Moisture Surveying of Roofing and Waterproofing Systems Using Non-Destructive Electrical Impedance Scanners


    D08.18 - Nonbituminous Organic Roof Coverings

    D3468/D3468M Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing

    D4434/D4434M Standard Specification for Poly(Vinyl Chloride) Sheet Roofing

    D4637/D4637M Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane

    D4811/D4811M Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing

    D5405/D5405M Standard Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material

    D6134 Standard Specification for Vulcanized Rubber Sheets Used in Waterproofing Systems

    D6369 Standard Guide for Design of Standard Flashing Details for EPDM Roof Membranes

    D6383/D6383M Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material

    D6754/D6754M Standard Specification for Ketone Ethylene Ester Based Sheet Roofing

    D6878/D6878M Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing

    D7635/D7635M Standard Test Method for Measurement of Thickness of Coatings Over Fabric Reinforcement

    E1918 Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field

    E1980 Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-Sloped Opaque Surfaces


    D08.09 - Bituminous Emulsions

    D1187/D1187M Standard Specification for Asphalt-Base Emulsions for Use as Protective Coatings for Metal

    D1227 Standard Specification for Emulsified Asphalt Used as a Protective Coating for Roofing

    D3423/D3423M Standard Practice for Application of Emulsified Coal-Tar Pitch (Mineral Colloid Type)

    D3747 Standard Specification for Emulsified Asphalt Adhesive for Adhering Roof Insulation

    D4866/D4866M Standard Performance Specification for Coal Tar Pitch Emulsion Pavement Sealer Mix Formulations Containing Mineral Aggregates and Optional Polymeric Admixtures

    D5727/D5727M Standard Specification for Emulsified Refined Coal Tar (Mineral Colloid Type)

    D6356/D6356M Standard Test Method for Hydrogen Gas Generation of Aluminum Emulsified Asphalt Used as a Protective Coating for Roofing

    D6805 Standard Practice for Infrared (IR) Procedure for Determination of Aromatic/Aliphatic Ratio of Bituminous Emulsions

    D6945/D6945M Standard Specification for Emulsified Refined Coal-Tar (Ready to Use, Commercial Grade)

    D6946/D6946M Standard Specification for Emulsified Refined Coal-Tar (Driveway Sealer, Ready to Use, Primarily Residential Grade)

    D6948/D6948M Standard Practice for Application of Refined Coal Tar (Ready to Use, Commercial Grade)


    D08.05 - Solvent-Bearing Bituminous Compounds for Roofing and Waterproofing

    D2822/D2822M Standard Specification for Asphalt Roof Cement, Asbestos Containing

    D2824/D2824M Standard Specification for Aluminum-Pigmented Asphalt Roof Coatings, Nonfibered, and Fibered without Asbestos

    D3019 Standard Specification for Lap Cement Used with Asphalt Roll Roofing, Non-Fibered, Asbestos-Fibered, and Non-Asbestos-Fibered

    D3409 Standard Test Method for Adhesion of Asphalt-Roof Cement to Damp, Wet, or Underwater Surfaces

    D3805/D3805M Standard Guide for Application of Aluminum-Pigmented Asphalt Roof Coatings

    D41/D41M Standard Specification for Asphalt Primer Used in Roofing, Dampproofing, and Waterproofing

    D43/D43M Standard Specification for Coal Tar Primer Used in Roofing, Dampproofing, and Waterproofing

    D4479/D4479M Standard Specification for Asphalt Roof Coatings - Asbestos-Free

    D4586/D4586M Standard Specification for Asphalt Roof Cement, Asbestos-Free

    D5643/D5643M Standard Specification for Coal Tar Roof Cement, Asbestos Free

    D6511/D6511M Standard Test Methods for Solvent Bearing Bituminous Compounds

    D6753/D6753M Standard Specification for Coal Tar Adhesive

    D88 Standard Test Method for Saybolt Viscosity

    E102/E102M Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures


    D08.04 - Felts, Fabrics and Bituminous Sheet Materials

    D1327/D1327M Standard Specification for Bitumen-Saturated Woven Burlap Fabrics Used in Roofing and Waterproofing

    D146/D146M Standard Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing

    D1668/D1668M Standard Specification for Glass Fabrics (Woven and Treated) for Roofing and Waterproofing

    D173/D173M Standard Specification for Bitumen-Saturated Cotton Fabrics Used in Roofing and Waterproofing

    D2178/D2178M Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing

    D226/D226M Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing

    D227/D227M Standard Specification for Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing

    D2626/D2626M Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing

    D3909/D3909M Standard Specification for Asphalt Roll Roofing (Glass Felt) Surfaced With Mineral Granules

    D4601/D4601M Standard Specification for Asphalt-Coated Glass Fiber Base Sheet Used in Roofing

    D4830/D4830M Standard Test Methods for Characterizing Thermoplastic Fabrics Used in Roofing and Waterproofing

    D4897/D4897M Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing

    D4990 Standard Specification for Coal Tar Glass Felt Used in Roofing and Waterproofing

    D5147/D5147M Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material

    D5665/D5665M Standard Specification for Thermoplastic Fabrics Used in Cold-Applied Roofing and Waterproofing

    D5726 Standard Specification for Thermoplastic Fabrics Used in Hot-Applied Roofing and Waterproofing

    D5849/D5849M Standard Test Method for Evaluating Resistance of Modified Bituminous Roofing Membrane to Cyclic Fatigue (Joint Displacement)

    D6136/D6136M Standard Test Method for Kerosine Number of Unsaturated (Dry) Felt by Vacuum Method

    D6162/D6162M Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements

    D6163/D6163M Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements

    D6164/D6164M Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements

    D6221/D6221M Standard Specification for Reinforced Bituminous Flashing Sheets for Roofing and Waterproofing

    D6222/D6222M Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using Polyester Reinforcements

    D6223/D6223M Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements

    D6225/D6225M Standard Test Method for Granule Cover of Mineral Surfaced Roofing

    D6298 Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface

    D6509/D6509M Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Base Sheet Materials Using Glass Fiber Reinforcements

    D7051 Standard Test Method for Cyclic Thermal Shock of SBS-Modified Bituminous Roofing Sheets with Factory-Applied Metal Surface

    D7379/D7379M Standard Test Methods for Strength of Modified Bitumen Sheet Material Laps Using Cold Process Adhesive


    D08.03 - Surfacing and Bituminous Materials for Membrane Waterproofing and Built-up Roofing

    D1863/D1863M Standard Specification for Mineral Aggregate Used on Built-Up Roofs

    D1864/D1864M Standard Test Method for Moisture in Mineral Aggregate Used on Built-Up Roofs

    D1865/D1865M Standard Test Method for Hardness of Mineral Aggregate Used on Built-Up Roofs

    D2521/D2521M Standard Specification for Asphalt Used in Canal, Ditch, and Pond Lining

    D312/D312M Standard Specification for Asphalt Used in Roofing

    D36/D36M Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)

    D3791/D3791M Standard Practice for Evaluating the Effects of Heat on Asphalts

    D4 Standard Test Method for Bitumen Content

    D4402/D4402M Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer

    D449/D449M Standard Specification for Asphalt Used in Dampproofing and Waterproofing

    D450/D450M Standard Specification for Coal-Tar Pitch Used in Roofing, Dampproofing, and Waterproofing

    D4989/D4989M Standard Test Method for Apparent Viscosity (Flow) of Roofing Bitumens Using the Parallel Plate Plastometer

    D5081/D5081M Standard Test Method for Aggregate Layer Hiding Power

    D5100/D5100M Standard Test Method for Adhesion of Mineral Aggregate to Hot Bitumen

    D6/D6M Standard Test Method for Loss on Heating of Oil and Asphaltic Compounds

    D6152/D6152M Standard Specification for SEBS-Modified Mopping Asphalt Used in Roofing

    D7654/D7654M Standard Specification for Asphalt Used in Roofing Measured by Dynamic Shear Rheometer


    D07.03 - Panel Products

    D1037 Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials

    D1038 Standard Terminology Relating to Veneer and Plywood

    D1554 Standard Terminology Relating to Wood-Base Fiber and Particle Panel Materials

    D2718 Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)

    D2719 Standard Test Methods for Structural Panels in Shear Through-the-Thickness

    D3043 Standard Test Methods for Structural Panels in Flexure

    D3044 Standard Test Method for Shear Modulus of Wood-Based Structural Panels

    D3499 Standard Test Method for Toughness of Wood-Based Structural Panels

    D3500 Standard Test Methods for Structural Panels in Tension

    D3501 Standard Test Methods for Wood-Based Structural Panels in Compression

    D5582 Standard Test Method for Determining Formaldehyde Levels from Wood Products Using a Desiccator

    D5651 Standard Test Method for Surface Bond Strength of Wood-Base Fiber and Particle Panel Materials

    D6007 Standard Test Method for Determining Formaldehyde Concentrations in Air from Wood Products Using a Small-Scale Chamber

    D6643 Standard Test Method for Testing Wood-Base Panel Corner Impact Resistance

    D7033 Standard Practice for Establishing Design Capacities for Oriented Strand Board (OSB) Wood-Based Structural-Use Panels

    D7433 Standard Test Method for Measuring Surface Water Absorption of Overlaid Wood-Based Panels

    D7519 Standard Test Method for Internal Bond Strength and Thickness Swell of Cellulosic-Based Fiber and Particle Panels After Repeated Wetting

    D7770 Standard Test Method for Collection of Volatile Organic Compounds Emitted During Simulated Manufacturing of Engineered Wood Products Via a Sealed Caul Plate Method

    E1333 Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber


    D08.02 - Steep Roofing Products and Assemblies

    D1370/D1370M Standard Test Method for Contact Compatibility Between Asphaltic Materials (Oliensis Test)

    D1669/D1669M Standard Practice for Preparation of Test Panels for Accelerated and Outdoor Weathering of Bituminous Coatings

    D1670/D1670M Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials

    D1970/D1970M Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection

    D228/D228M Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing

    D2746 Standard Test Method for Staining Tendency of Asphalt (Stain Index)

    D3018/D3018M Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules

    D3161/D3161M Standard Test Method for Wind-Resistance of Steep Slope Roofing Products (Fan-Induced Method)

    D3462/D3462M Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules

    D451/D451M Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products

    D452/D452M Standard Test Method for Sieve Analysis of Surfacing for Asphalt Roofing Products

    D4798/D4798M Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)

    D4799/D4799M Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)

    D4869/D4869M Standard Specification for Asphalt-Saturated Organic Felt Underlayment Used in Steep Slope Roofing

    D4977/D4977M Standard Test Method for Granule Adhesion to Mineral Surfaced Roofing by Abrasion

    D5869 Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials

    D6380/D6380M Standard Specification for Asphalt Roll Roofing (Organic Felt)

    D6381/D6381M Standard Test Method for Measurement of Asphalt Shingle Mechanical Uplift Resistance

    D6757 Standard Specification for Underlayment Felt Containing Inorganic Fibers Used in Steep-Slope Roofing

    D7158/D7158M Standard Test Method for Wind Resistance of Asphalt Shingles (Uplift Force/Uplift Resistance Method)

    D7349/D7349M Standard Test Method for Determining the Capability of Roofing and Waterproofing Materials to Seal around Fasteners

    D7505/D7505M Standard Specification for Self-Adhesive Polyester Fabric Reinforced Polymer Modified Asphalt Steep Slope Roll Roofing Surfaced with Mineral Granules

    D7530/D7530M Standard Specification for Self-Adhesive Glass Fiber Fabric Reinforced Polymer Modified Asphalt Steep Slope Roll Roofing Surfaced with Mineral Granules


    D07.02 - Lumber and Engineered Wood Products

    D1990 Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens

    D245 Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber

    D2915 Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products

    D3737 Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam)

    D3957 Standard Practices for Establishing Stress Grades for Structural Members Used in Log Buildings

    D5055 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists

    D5456 Standard Specification for Evaluation of Structural Composite Lumber Products

    D5457 Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design

    D6570 Standard Practice for Assigning Allowable Properties for Mechanically Graded Lumber

    D7031 Standard Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products

    D7032 Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite Deck Boards and Guardrail Systems (Guards or Handrails)

    D7199 Standard Practice for Establishing Characteristic Values for Reinforced Glued Laminated Timber (Glulam) Beams Using Mechanics-Based Models

    D7341 Standard Practice for Establishing Characteristic Values for Flexural Properties of Structural Glued Laminated Timber by Full-Scale Testing

    D7374 Standard Practice for Evaluating Elevated Temperature Performance of Adhesives Used in End-Jointed Lumber

    D7470 Standard Practice for Evaluating Elevated Temperature Performance of End-Jointed Lumber Studs


    D07.01 - Fundamental Test Methods and Properties

    D1102 Standard Test Method for Ash in Wood

    D1105 Standard Test Method for Preparation of Extractive-Free Wood

    D1106 Standard Test Method for Acid-Insoluble Lignin in Wood

    D1107 Standard Test Method for Ethanol-Toluene Solubility of Wood

    D1108 Standard Test Method for Dichloromethane Solubles in Wood

    D1109 Standard Test Method for 1 % Sodium Hydroxide Solubility of Wood

    D1110 Standard Test Methods for Water Solubility of Wood

    D1166 Standard Test Method for Methoxyl Groups in Wood and Related Materials

    D143 Standard Test Methods for Small Clear Specimens of Timber

    D1666 Standard Test Methods for Conducting Machining Tests of Wood and Wood-Base Materials

    D1762 Standard Test Method for Chemical Analysis of Wood Charcoal

    D198 Standard Test Methods of Static Tests of Lumber in Structural Sizes

    D2394 Standard Test Methods for Simulated Service Testing of Wood and Wood-Base Finish Flooring

    D2395 Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials

    D2555 Standard Practice for Establishing Clear Wood Strength Values

    D4442 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials

    D4444 Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters

    D4761 Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material

    D4933 Standard Guide for Moisture Conditioning of Wood and Wood-Base Materials

    D6782 Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters

    D6815 Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products

    D6874 Standard Test Methods for Nondestructive Evaluation of Wood-Based Flexural Members Using Transverse Vibration

    D6958 Standard Test Methods for Evaluating Side-Bonding Potential of Wood Coatings

    D7438 Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters

    D7469 Standard Test Methods for End-Joints in Structural Wood Products


    D04.95 - Quality Control, Inspection and Testing Agencies

    D3666 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials

    D4561 Standard Practice for Quality Control Systems for Organizations Producing and Applying Bituminous Paving Materials

    D7495 Standard Specification for Minimum Requirements for Accreditation Bodies that Accredit Agencies Testing and Inspecting Road and Paving Materials


    D04.51 - Aggregate Tests

    D2419 Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate

    D3042 Standard Test Method for Insoluble Residue in Carbonate Aggregates

    D3319 Standard Practice for Accelerated Polishing of Aggregates Using the British Wheel

    D3744/D3744M Standard Test Method for Aggregate Durability Index

    D4469 Standard Practice for Calculating Percent Asphalt Absorption by the Aggregate in an Asphalt Pavement Mixture

    D4791 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate

    D4792/D4792M Standard Test Method for Potential Expansion of Aggregates from Hydration Reactions

    D5148 Standard Test Method for Centrifuge Kerosine Equivalent

    D5444 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate

    D546 Standard Test Method for Sieve Analysis of Mineral Filler for Bituminous Paving Mixtures

    D5821 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate

    D6928 Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus

    D7172 Standard Test Method for Determining the Relative Density (Specific Gravity) and Absorption of Fine Aggregates Using Infrared

    D7370/D7370M Standard Test Method for Determination of Relative Density and Absorption of Fine, Coarse and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion

    D7428 Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus


    D04.50 - Aggregate Specifications

    D1073 Standard Specification for Fine Aggregate for Bituminous Paving Mixtures

    D1139/D1139M Standard Specification for Aggregate for Single or Multiple Bituminous Surface Treatments

    D242/D242M Standard Specification for Mineral Filler For Bituminous Paving Mixtures

    D2940/D2940M Standard Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports

    D448 Standard Classification for Sizes of Aggregate for Road and Bridge Construction

    D5106 Standard Specification for Steel Slag Aggregates for Bituminous Paving Mixtures

    D6155 Standard Specification for Nontraditional Coarse Aggregates for Bituminous Paving Mixtures

    D692/D692M Standard Specification for Coarse Aggregate for Bituminous Paving Mixtures


    D04.47 - Miscellaneous Asphalt Tests

    D2042 Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene

    D3142/D3142M Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method

    D3143/D3143M Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus

    D3279 Standard Test Method for n-Heptane Insolubles

    D3289 Standard Test Method for Density of Semi-Solid and Solid Bituminous Materials (Nickel Crucible Method)

    D4124 Standard Test Method for Separation of Asphalt into Four Fractions

    D5546 Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge

    D6608 Standard Practice for the Identification of Trinidad Lake Asphalt in Asphalt Mixes

    D6703 Standard Test Method for Automated Heithaus Titrimetry

    D70 Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method)

    D7173 Standard Practice for Determining the Separation Tendency of Polymer from Polymer Modified Asphalt

    D7553 Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide


    D04.46 - Durability and Distillation Tests

    D1754/D1754M Standard Test Method for Effects of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)

    D243/D243M Standard Test Method for Residue of Specified Penetration

    D2872 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)

    D402/D402M Standard Test Method for Distillation of Cutback Asphalt

    D6521 Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)


    D04.44 - Rheological Tests

    D113 Standard Test Method for Ductility of Bituminous Materials

    D139 Standard Test Method for Float Test for Bituminous Materials

    D2170/D2170M Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens)

    D2171/D2171M Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer

    D2493/D2493M Standard Viscosity-Temperature Chart for Asphalts

    D4957 Standard Test Method for Apparent Viscosity of Asphalt Emulsion Residues and Non-Newtonian Bitumens by Vacuum Capillary Viscometer

    D5/D5M Standard Test Method for Penetration of Bituminous Materials

    D5801 Standard Test Method for Toughness and Tenacity of Bituminous Materials

    D6084/D6084M Standard Test Method for Elastic Recovery of Bituminous Materials by Ductilometer

    D6648 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)

    D6723 Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)

    D6816 Standard Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders

    D7175 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer

    D7405 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer

    D7643 Standard Practice for Determining the Continuous Grading Temperatures and Continuous Grades for PG Graded Asphalt Binders

    D7741/D7741M Standard Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Hand Held Viscometer


    D04.43 - Specifications and Test for Tar and Tar Products

    D1665 Standard Test Method for Engler Specific Viscosity of Tar Products

    D20 Standard Test Method for Distillation of Road Tars

    D2728 Standard Practice for Paving Uses and Application Temperatures for Road Tars

    D490 Standard Specification for Road Tar

    D633 Standard Volume Correction Table for Road Tar


    D04.40 - Asphalt Specifications

    D2026/D2026M Standard Specification for Cutback Asphalt (Slow-Curing Type)

    D2027/D2027M Standard Specification for Cutback Asphalt (Medium-Curing Type)

    D2028/D2028M Standard Specification for Cutback Asphalt (Rapid-Curing Type)

    D2399 Standard Practice for Selection of Cutback Asphalts

    D3141/D3141M Standard Specification for Asphalt for Undersealing Portland-Cement Concrete Pavements

    D3381/D3381M Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction

    D4311/D4311M Standard Practice for Determining Asphalt Volume Correction to a Base Temperature

    D4552/D4552M Standard Practice for Classifying Hot-Mix Recycling Agents

    D5710/D5710M Standard Specification for Trinidad Lake Modified Asphalt

    D6114/D6114M Standard Specification for Asphalt-Rubber Binder

    D6154 Standard Specification for Chemically Modified Asphalt Cement for Use in Pavement Construction

    D6373 Standard Specification for Performance Graded Asphalt Binder

    D6626 Standard Specification for Performance Graded Trinidad Lake Modified Asphalt Binder

    D946/D946M Standard Specification for Penetration-Graded Asphalt Cement for Use in Pavement Construction


    D04.42 - Emulsified Asphalt Test

    D244 Standard Test Methods and Practices for Emulsified Asphalts

    D6929 Standard Practice for Freezing of Emulsified Asphalts

    D6930 Standard Test Method for Settlement and Storage Stability of Emulsified Asphalts

    D6933 Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)

    D6934 Standard Test Method for Residue by Evaporation of Emulsified Asphalt

    D6935 Standard Test Method for Determining Cement Mixing of Emulsified Asphalt

    D6936 Standard Test Method for Determining Demulsibility of Emulsified Asphalt

    D6937 Standard Test Method for Determining Density of Emulsified Asphalt

    D6997 Standard Test Method for Distillation of Emulsified Asphalt

    D6998 Standard Practice for Evaluating Aggregate Coating using Emulsified Asphalts

    D6999 Standard Practice for Miscibility of Emulsified Asphalts

    D7226 Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer

    D7402 Standard Practice for Identifying Cationic Emulsified Asphalts

    D7403 Standard Test Method for Determination of Residue of Emulsified Asphalt by Low Temperature Vacuum Distillation

    D7404 Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer

    D7496 Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer

    D7497 Standard Practice for Recovering Residue from Emulsified Asphalt Using Low Temperature Evaporative Technique


    D04.38 - Highway Traffic Control Materials

    D4280 Standard Specification for Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers

    D4383 Standard Specification for Plowable, Raised Retroreflective Pavement Markers

    D4505 Standard Specification for Preformed Retroreflective Pavement Marking Tape for Extended Service Life

    D4592 Standard Specification for Preformed Retroreflective Pavement Marking Tape for Limited Service Life

    D4956 Standard Specification for Retroreflective Sheeting for Traffic Control

    D6628 Standard Specification for Color of Pavement Marking Materials

    D7585/D7585M Standard Practice for Evaluating Retroreflective Pavement Markings Using Portable Hand-Operated Instruments

    D7942 Standard Specification for Thermoplastic Pavement Markings in Non Snow Plow Areas


    D04.34 - Preformed Joint Fillers, Sealers and Sealing Systems

    D1751 Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types)

    D1752 Standard Specification for Preformed Sponge Rubber Cork and Recycled PVC Expansion Joint Fillers for Concrete Paving and Structural Construction

    D2628 Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements

    D2835 Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements

    D3542 Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges

    D4070 Standard Specification for Adhesive Lubricant for Installation of Preformed Elastomeric Bridge Compression Seals in Concrete Structures

    D517 Standard Specification for Asphalt Plank

    D545 Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)

    D5973 Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing

    D6924 Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges

    D7174 Standard Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction

    D994/D994M Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type)


    D04.33 - Formed In-Place Sealants for Joints and Cracks in Pavements

    D1985 Standard Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks

    D5078/D5078M Standard Specification for Crack Filler, Hot-Applied, for Asphalt Concrete and Portland Cement Concrete Pavements

    D5167 Standard Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation

    D5249 Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints

    D5329 Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements

    D5893/D5893M Standard Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements

    D6690 Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements


    D04.32 - Bridges and Structures

    D3633/D3633M Standard Test Method for Electrical Resistivity of Membrane-Pavement Systems

    D3963/D3963M Standard Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars

    D4014 Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges

    D4071 Standard Practice for Use of Portland Cement Concrete Bridge Deck Water Barrier Membrane Systems

    D4580/D4580M Standard Practice for Measuring Delaminations in Concrete Bridge Decks by Sounding

    D4788 Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography

    D5977 Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures

    D6087 Standard Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar

    D6153 Standard Specification for Materials for Bridge Deck Waterproofing Membrane Systems

    D6297 Standard Specification for Asphaltic Plug Joints for Bridges


    D04.30 - Methods of Sampling

    D140/D140M Standard Practice for Sampling Bituminous Materials

    D3665 Standard Practice for Random Sampling of Construction Materials

    D5361/D5361M Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing

    D75/D75M Standard Practice for Sampling Aggregates

    D979/D979M Standard Practice for Sampling Bituminous Paving Mixtures


    D04.27 - Cold Mix Asphalts

    D4215 Standard Specification for Cold-Mixed, Cold-Laid Bituminous Paving Mixtures

    D6627/D6627M Standard Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures

    D6704 Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material

    D7196 Standard Test Method for Raveling Test of Cold Mixed Emulsified Asphalt Samples

    D7229 Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor


    D04.26 - Fundamental/Mechanistic Tests

    D3387 Standard Test Method for Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S. Corps of Engineers Gyratory Testing Machine (GTM)

    D6931 Standard Test Method for Indirect Tensile (IDT) Strength of Bituminous Mixtures

    D7312 Standard Test Method for Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST)

    D7313 Standard Test Method for Determining Fracture Energy of Asphalt-Aggregate Mixtures Using the Disk-Shaped Compact Tension Geometry

    D7369 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension Test

    D7460 Standard Test Method for Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending

    D7552 Standard Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer


    D04.25 - Analysis of Asphalt Mixtures

    D1461 Standard Test Method for Moisture or Volatile Distillates in Bituminous Paving Mixtures

    D1856 Standard Test Method for Recovery of Asphalt From Solution by Abson Method

    D2172/D2172M Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures

    D4125/D4125M Standard Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method

    D4887/D4887M Standard Practice for Preparation of Viscosity Blends for Hot Recycled Bituminous Materials

    D5404/D5404M Standard Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator

    D6307 Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method

    D6390 Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures

    D7906 Standard Practice for Recovery of Asphalt from Solution Using Toluene and the Rotary Evaporator


    D04.24 - Asphalt Surface Treatments

    D1369 Standard Practice for Quantities of Materials for Bituminous Surface Treatments

    D2995 Standard Practice for Estimating Application Rate of Bituminous Distributors

    D3910 Standard Practices for Design, Testing, and Construction of Slurry Seal

    D5360 Standard Practice for Design and Construction of Bituminous Surface Treatments

    D5624 Standard Practice for Determining the Transverse-Aggregate Spread Rate for Surface Treatment Applications

    D6372 Standard Practice for Design, Testing, and Construction of Micro-Surfacing

    D7000 Standard Test Method for Sweep Test of Bituminous Emulsion Surface Treatment Samples

    D7564/D7564M Standard Practice for Construction of Asphalt-Rubber Cape Seal


    D04.22 - Effect of Water and Other Elements on Asphalt Coated Aggregates

    D1075 Standard Test Method for Effect of Water on Compressive Strength of Compacted Bituminous Mixtures

    D3625/D3625M Standard Practice for Effect of Water on Bituminous-Coated Aggregate Using Boiling Water

    D4867/D4867M Standard Test Method for Effect of Moisture on Asphalt Concrete Paving Mixtures

    D7870/D7870M Standard Practice for Moisture Conditioning Compacted Asphalt Mixture Specimens by Using Hydrostatic Pore Pressure


    D04.21 - Specific Gravity and Density of Asphalt Mixtures

    D1188 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples

    D2041/D2041M Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures

    D2726/D2726M Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures

    D2950/D2950M Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods

    D3203/D3203M Standard Test Method for Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures

    D3549/D3549M Standard Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens

    D6752/D6752M Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method

    D6857/D6857M Standard Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method

    D6995 Standard Test Method for Determining Field VMA based on the Maximum Specific Gravity of the Mix (Gmm)

    D7063/D7063M Standard Test Method for Effective Porosity and Effective Air Voids of Compacted Bituminous Paving Mixture Samples

    D7113/D7113M Standard Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods

    D7227/D7227M Standard Practice for Rapid Drying of Compacted Asphalt Specimens Using Vacuum Drying Apparatus


    D01.47 - Concrete, Stone and Masonry Treatments

    D1734 Standard Practice for Making Cementitious Panels for Testing Coatings

    D5095 Standard Test Method for Determination of the Nonvolatile Content in Silanes, Siloxanes and Silane-Siloxane Blends Used in Masonry Water Repellent Treatments

    D5107 Standard Practice for Preparatory Surface Cleaning of Architectural Sandstone

    D5703 Standard Practice for Preparatory Surface Cleaning for Clay Brick Masonry

    D5860 Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens

    D6489 Standard Test Method for Determining the Water Absorption of Hardened Concrete Treated With a Water Repellent Coating

    D6490 Standard Test Method for Water Vapor Transmission of NonFilm Forming Treatments Used on Cementitious Panels

    D6532 Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens

    D6904 Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry

    D7088 Standard Practice for Resistance to Hydrostatic Pressure for Coatings Used in Below Grade Applications Applied to Masonry

    D7089 Standard Practice for Determination of the Effectiveness of Anti-Graffiti Coating for Use on Concrete, Masonry and Natural Stone Surfaces by Pressure Washing


    D01.46 - Industrial Protective Coatings

    C1486 Standard Practice for Testing Chemical-Resistant Broadcast and Slurry-Broadcast Resin Monolithic Floor Surfacings

    C267 Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes

    C307 Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings

    C308 Standard Test Methods for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars

    C413 Standard Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

    C531 Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

    C579 Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

    C580 Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

    C722 Standard Specification for Chemical-Resistant Monolithic Floor Surfacings

    C868 Standard Test Method for Chemical Resistance of Protective Linings

    D2200 Standard Practice for Use of Pictorial Surface Preparation Standards and Guides for Painting Steel Surfaces

    D3276 Standard Guide for Painting Inspectors (Metal Substrates)

    D4417 Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel

    D4541 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers

    D4752 Standard Practice for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub

    D4787 Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates

    D4940 Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blasting Abrasives

    D5043 Standard Practice for Field Identification of Coatings

    D5064 Standard Practice for Conducting a Patch Test to Assess Coating Compatibility

    D5065 Standard Guide for Assessing the Condition of Aged Coatings on Steel Surfaces

    D5162 Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates

    D5402 Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs

    D5702 Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals

    D6206 Standard Practice for Sampling of Coating Films

    D6237 Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)

    D6386 Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting

    D6577 Standard Guide for Testing Industrial Protective Coatings

    D6578/D6578M Standard Practice for Determination of Graffiti Resistance

    D6677 Standard Test Method for Evaluating Adhesion by Knife

    D6943 Standard Practice for Immersion Testing of Industrial Protective Coatings

    D6944 Standard Practice for Resistance of Cured Coatings to Thermal Cycling

    D7055 Standard Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings

    D7127 Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument

    D7234 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers

    D7393 Standard Practice for Indicating Oil in Abrasives

    D7396 Standard Guide for Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting

    D7682 Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty

    D7803 Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Powder Coating

    D7868 Standard Practice for Determining the Dry Fall (Fog) Properties of Protective Coatings


    D01.44 - Traffic Coatings

    D1155 Standard Test Method for Roundness of Glass Spheres

    D1214 Standard Test Method for Sieve Analysis of Glass Spheres

    D1309 Standard Test Method for Settling Properties of Traffic Paints During Storage

    D2205 Standard Guide for Selection of Tests for Traffic Paints

    D2743 Standard Practices for Uniformity of Traffic Paint Vehicle Solids by Spectroscopy and Gas Chromatography

    D2792 Standard Test Method for Solvent and Fuel Resistance of Traffic Paint

    D4796 Standard Test Method for Bond Strength of Thermoplastic Traffic Marking Materials

    D4797 Standard Test Methods for Gravimetric Analysis of White and Yellow Thermoplastic Traffic Marking

    D4960 Standard Test Method for Evaluation of Color for Thermoplastic Traffic Marking Materials

    D711 Standard Test Method for No-Pick-Up Time of Traffic Paint

    D713 Standard Practice for Conducting Road Service Tests on Fluid Traffic Marking Materials

    D7307 Standard Practice for Sampling of Thermoplastic Traffic Marking Materials

    D7308 Standard Practice for Sample Preparation of Thermoplastic Traffic Marking Materials

    D7377 Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints using a Water Faucet

    D7538 Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints Using an Atomizing Spray Device

    D7539 Standard Practice for Using a Test Chamber for Humidity Conditioning of Test Panels of Pavement Marking Paints

    D7681 Standard Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer

    D7735 Standard Test Method for Type A Durometer Hardness Testing of Road Marking Thermoplastic at Elevated Temperatures

    D7971 Standard Guide for Measuring Roundness of Glass Spheres Using a Flowing Stream Digital Image Analyzer

    D868 Standard Practice for Determination of Degree of Bleeding of Traffic Paint

    D913 Standard Practice for Evaluating Degree of Traffic Paint Line Wear


    D01.42 - Architectural Coatings

    D1849 Standard Test Method for Package Stability of Paint

    D2064 Standard Test Method for Print Resistance of Architectural Paints

    D2243 Standard Test Method for Freeze-Thaw Resistance of Water-Borne Coatings

    D2486 Standard Test Methods for Scrub Resistance of Wall Paints

    D3258 Standard Test Method for Porosity of White or Near White Paint Films by Staining

    D3450 Standard Test Method for Washability Properties of Interior Architectural Coatings

    D3730 Standard Guide for Testing High-Performance Interior Architectural Wall Coatings

    D3928 Standard Test Method for Evaluation of Gloss or Sheen Uniformity

    D4062 Standard Test Method for Leveling of Paints by Draw-Down Method

    D4213 Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss

    D4400 Standard Test Method for Sag Resistance of Paints Using a Multinotch Applicator

    D4446/D4446M Standard Test Method for Anti-Swelling Effectiveness of Water-Repellent Formulations and Differential Swelling of Untreated Wood When Exposed to Liquid Water Environments

    D4707 Standard Test Method for Measuring Paint Spatter Resistance During Roller Application

    D4828 Standard Test Methods for Practical Washability of Organic Coatings

    D4946 Standard Test Method for Blocking Resistance of Architectural Paints

    D4958 Standard Test Method for Comparison of the Brush Drag of Latex Paints

    D5007 Standard Test Method for Wet-to-Dry Hiding Change

    D5146 Standard Guide to Testing Solvent-Borne Architectural Coatings

    D5150 Standard Test Method for Hiding Power of Architectural Paints Applied by Roller

    D5324 Standard Guide for Testing Water-Borne Architectural Coatings

    D5326 Standard Test Method for Color Development in Tinted Latex Paints

    D5401 Standard Test Method for Evaluating Clear Water Repellent Coatings on Wood

    D6189 Standard Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings

    D6583 Standard Test Method for Porosity of Paint Film by Mineral Oil Absorption

    D6686 Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings

    D6736 Standard Test Method for Burnish Resistance of Latex Paints

    D6763 Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents

    D6900 Standard Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate

    D7072 Standard Practice for Evaluating Accelerated Efflorescence of Latex Coatings

    D7073 Standard Guide for Application and Evaluation of Brush and Roller Applied Paint Films

    D7190 Standard Practice to Evaluate Leaching of Water-Soluble Materials from Latex Paint Films

    D7306 Standard Practice for Testing Low Temperature Film-Formation of Latex Paints by Visual Observation

    D7488 Standard Test Method for Open Time of Latex Paints

    D7489 Standard Practice for Evaluating Touch-Up Properties of Architectural Coatings under Various Environmental Conditions

    D7514 Standard Test Method for Evaluating Ink Stainblocking of Architectural Paint Systems by Visual Assessment

    D7786 Standard Test Method for Determining Enamel Holdout

    D7787/D7787M Standard Practice for Selecting Wood Substrates for Weathering Evaluations of Architectural Coatings


    C27.30 - Water and Wastewater Containers

    C1227 Standard Specification for Precast Concrete Septic Tanks

    C1613 Standard Specification for Precast Concrete Grease Interceptor Tanks

    C1644 Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes

    C1719 Standard Test Method for Installed Precast Concrete Tanks and Accessories by the Negative Air Pressure (Vacuum) Test Prior to Backfill

    C890 Standard Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures

    C913 Standard Specification for Precast Concrete Water and Wastewater Structures


    C27.40 - Glass Fiber Reinforced Concrete

    C1228 Standard Practice for Preparing Coupons for Flexural and Washout Tests on Glass Fiber Reinforced Concrete

    C1229 Standard Test Method for Determination of Glass Fiber Content in Glass Fiber Reinforced Concrete (GFRC) (Wash-Out Test)

    C1230 Standard Test Method for Performing Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads

    C1560 Standard Test Method for Hot Water Accelerated Aging of Glass-Fiber Reinforced Cement-Based Composites

    C1666/C1666M Standard Specification for Alkali Resistant (AR) Glass Fiber for GFRC and Fiber-Reinforced Concrete and Cement

    C1704/C1704M Standard Test Method for Sampling and Testing Structural Cementitious Panels

    C1705/C1705M Standard Specification for Structural Cementitious Panels

    C947 Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)

    C948 Standard Test Method for Dry and Wet Bulk Density, Water Absorption, and Apparent Porosity of Thin Sections of Glass-Fiber Reinforced Concrete


    C27.20 - Architectural and Structural Products

    C1089 Standard Specification for Spun Cast Prestressed Concrete Poles

    C1194 Standard Test Method for Compressive Strength of Architectural Cast Stone

    C1195 Standard Test Method for Absorption of Architectural Cast Stone

    C1364 Standard Specification for Architectural Cast Stone

    C1804 Standard Specification for Spun Cast Prestressed Concrete Bases for Tapered Steel Lighting Poles

    C825 Standard Specification for Precast Concrete Barriers

    C915 Standard Specification for Precast Reinforced Concrete Crib Wall Members

    C935 Standard Specification for General Requirements for Prestressed Concrete Poles Statically Cast


    C27.10 - Utility Structures

    C1037 Standard Practice for Inspection of Underground Precast Concrete Utility Structures

    C1802 Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures

    C857 Standard Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures

    C858 Standard Specification for Underground Precast Concrete Utility Structures

    C891 Standard Practice for Installation of Underground Precast Concrete Utility Structures


    C24.73 - Compression Seal and Lock Strip Gaskets

    C1083 Standard Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials

    C1115 Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories

    C1166 Standard Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories

    C509 Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material

    C542 Standard Specification for Lock-Strip Gaskets

    C716 Standard Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials

    C864 Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers

    C963 Standard Specification for Packaging, Identification, Shipment, and Storage of Lock-Strip Gaskets

    C964 Standard Guide for Lock-Strip Gasket Glazing

    E2203 Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories


    C24.61 - Aerosol Foam Sealants

    C1536 Standard Test Method for Measuring the Yield for Aerosol Foam Sealants

    C1620 Standard Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants

    C1642 Standard Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials

    C1643 Standard Test Method to Measuring the Post Dispensing Volumetric Expansion of Aerosol Foam Sealants

    C1737 Standard Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing

    C1806 Standard Test Method for Measuring the Flow Rate of Aerosol Foam Sealants


    C24.40 - Weathering

    C1248 Standard Test Method for Staining of Porous Substrate by Joint Sealants

    C1257 Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants

    C1442 Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus

    C1501 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures

    C1519 Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures

    C1589/C1589M Standard Practice for Outdoor Weathering of Construction Seals and Sealants

    C510 Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants

    C732 Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants

    C734 Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering

    C793 Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants


    C24.20 - General Test Methods

    C1016 Standard Test Method for Determination of Water Absorption of Sealant Backing (Joint Filler) Material

    C1087 Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems

    C1183/C1183M Standard Test Method for Extrusion Rate of Elastomeric Sealants

    C1241 Standard Test Method for Volume Shrinkage of Latex Sealants During Cure

    C1246 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure

    C1253 Standard Test Method for Determining the Outgassing Potential of Sealant Backing

    C1266 Standard Test Method for Flow Characteristics of Preformed Tape Sealants

    C1294 Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials

    C1681 Standard Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain

    C1735 Standard Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation

    C603 Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants

    C639 Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants

    C661 Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer

    C679 Standard Test Method for Tack-Free Time of Elastomeric Sealants

    C681 Standard Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds

    C711 Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants

    C712 Standard Test Method for Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants

    C731 Standard Test Method for Extrudability, After Package Aging, of Latex Sealants

    C765 Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants

    C771 Standard Test Method for Weight Loss After Heat Aging of Preformed Tape Sealants

    C772 Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants

    C782 Standard Test Method for Softness of Preformed Tape Sealants

    C792 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants

    C879 Standard Test Methods for Release Papers Used with Preformed Tape Sealants

    C972 Standard Test Method for Compression-Recovery of Tape Sealant

    D2202 Standard Test Method for Slump of Sealants

    D2203 Standard Test Method for Staining from Sealants

    D2377 Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants

    D2452 Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds

    D2453 Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds


    C24.30 - Adhesion

    C1135 Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants

    C1216/C1216M Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants

    C1247 Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids

    C1265 Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications

    C1367 Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures

    C1382 Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints

    C1521 Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints

    C1523 Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants

    C1635 Standard Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension

    C1736 Standard Practice for Non-Destructive Evaluation of Adhesion of Installed Weatherproofing Sealant Joints Using a Rolling Device

    C719 Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)

    C736 Standard Test Method for Extension-Recovery and Adhesion of Latex Sealants

    C794 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants

    C907 Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method

    C908 Standard Test Method for Yield Strength of Preformed Tape Sealants

    C910 Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants

    C961 Standard Test Method for Lap Shear Strength of Sealants


    C24.10 - Specifications, Guides and Practices

    C1021 Standard Practice for Laboratories Engaged in Testing of Building Sealants

    C1184 Standard Specification for Structural Silicone Sealants

    C1193 Standard Guide for Use of Joint Sealants

    C1249 Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications

    C1281 Standard Specification for Preformed Tape Sealants for Glazing Applications

    C1311 Standard Specification for Solvent Release Sealants

    C1330 Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants

    C1369 Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units

    C1375 Standard Guide for Substrates Used in Testing Building Seals and Sealants

    C1392 Standard Guide for Evaluating Failure of Structural Sealant Glazing

    C1394 Standard Guide for In-Situ Structural Silicone Glazing Evaluation

    C1401 Standard Guide for Structural Sealant Glazing

    C1472 Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width

    C1481 Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)

    C1487 Standard Guide for Remedying Structural Silicone Glazing

    C1518 Standard Specification for Precured Elastomeric Silicone Joint Sealants

    C1520 Standard Guide for Paintability of Latex Sealants

    C1564 Standard Guide for Use of Silicone Sealants for Protective Glazing Systems

    C1756 Standard Guide for Comparing Sealant Behavior to Reference Photographs

    C834 Standard Specification for Latex Sealants

    C919 Standard Practice for Use of Sealants in Acoustical Applications

    C920 Standard Specification for Elastomeric Joint Sealants


    C24.01 - Terminology of Building Seals and Sealants

    C717 Standard Terminology of Building Seals and Sealants


    C21.06 - Ceramic Tile

    C1026 Standard Test Method for Measuring the Resistance of Ceramic and Glass Tile to Freeze-Thaw Cycling

    C1027 Standard Test Method for Determining Visible Abrasion Resistance of Glazed Ceramic Tile

    C1243 Standard Test Method for Relative Resistance to Deep Abrasive Wear of Unglazed Ceramic Tile by Rotating Disc

    C1378 Standard Test Method for Determination of Resistance to Staining

    C1505 Standard Test Method for Determination of Breaking Strength of Ceramic Tiles by Three-Point Loading

    C482 Standard Test Method for Bond Strength of Ceramic Tile to Portland Cement Paste

    C484 Standard Test Method for Thermal Shock Resistance of Glazed Ceramic Tile

    C485 Standard Test Method for Measuring Warpage of Ceramic Tile

    C499 Standard Test Method for Facial Dimensions and Thickness of Flat, Rectangular Ceramic Wall and Floor Tile

    C501 Standard Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser

    C502 Standard Test Method for Wedging of Flat, Rectangular Ceramic Wall and Floor Tile

    C609 Standard Test Method for Measurement of Light Reflectance Value and Small Color Differences Between Pieces of Ceramic Tile

    C627 Standard Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester

    C648 Standard Test Method for Breaking Strength of Ceramic Tile

    C650 Standard Test Method for Resistance of Ceramic Tile to Chemical Substances

    C895 Standard Test Method for Lead and Cadmium Extracted from Glazed Ceramic Tile


    C18.03 - Material Specifications

    C1526 Standard Specification for Serpentine Dimension Stone

    C1527/C1527M Standard Specification for Travertine Dimension Stone

    C406/C406M Standard Specification for Roofing Slate

    C503/C503M Standard Specification for Marble Dimension Stone

    C568/C568M Standard Specification for Limestone Dimension Stone

    C615/C615M Standard Specification for Granite Dimension Stone

    C616/C616M Standard Specification for Quartz-Based Dimension Stone

    C629/C629M Standard Specification for Slate Dimension Stone


    C18.06 - Attachment Components and Systems

    C1242 Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems


    C18.01 - Test Methods

    C120/C120M Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)

    C1201/C1201M Standard Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air Pressure Difference

    C121/C121M Standard Test Method for Water Absorption of Slate

    C1352/C1352M Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone

    C1353/C1353M Standard Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform Abraser

    C1354/C1354M Standard Test Method for Strength of Individual Stone Anchorages in Dimension Stone

    C170/C170M Standard Test Method for Compressive Strength of Dimension Stone

    C1721 Standard Guide for Petrographic Examination of Dimension Stone

    C217/C217M Standard Test Method for Weather Resistance of Slate

    C241/C241M Standard Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic

    C880/C880M Standard Test Method for Flexural Strength of Dimension Stone

    C97/C97M Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone

    C99/C99M Standard Test Method for Modulus of Rupture of Dimension Stone


    C17.03 - Asbestos - Cement Sheet Products and Accessories

    C1080 Standard Specification for Asbestos-Cement Products Other Than Fill For Cooling Towers

    C1081 Standard Specification for Asbestos-Cement Corrugated Fill For Use in Cooling Towers

    C1082 Standard Specification for Asbestos-Cement Flat Sheet for Cooling Tower Fill

    C1096/C1096M Standard Test Method for Determination of Wood Fiber in Asbestos Cement

    C1119/C1119M Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes

    C1120/C1120M Standard Test Method for Wash Test of Asbestos

    C1121/C1121M Standard Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos

    C1122/C1122M Standard Test Method for Wet Volume of Asbestos

    C1123/C1123M Standard Test Method for Compressibility and Recovery of Asbestos

    C1124/C1124M Standard Test Method for Kerosene Retention of Asbestos

    C1125 Standard Test Method for Penetration Index of Asbestos

    C1162/C1162M Standard Test Method for Loose Density of Asbestos

    C220 Standard Specification for Flat Asbestos-Cement Sheets

    C221 Standard Specification for Corrugated Asbestos-Cement Sheets

    C222 Standard Specification for Asbestos-Cement Roofing Shingles

    C223 Standard Specification for Asbestos-Cement Siding

    C296/C296M Standard Specification for Asbestos-Cement Pressure Pipe

    C428/C428M Standard Specification for Asbestos-Cement Nonpressure Sewer Pipe

    C458/C458M Standard Test Method for Organic Fiber Content of Asbestos-Cement Products

    C459/C459M Standard Test Methods for Asbestos-Cement Flat Products

    C500/C500M Standard Test Methods for Asbestos-Cement Pipe

    C508/C508M Standard Specification for Asbestos-Cement Underdrain Pipe

    C541/C541M Standard Specification for Linings for Asbestos-Cement Pipe

    C551/C551M Standard Specification for Asbestos-Cement Fiberboard Insulating Panels

    C659 Standard Specification for Asbestos-Cement Organic-Foam Core Insulating Panels

    C663 Standard Specification for Asbestos-Cement Storm Drain Pipe

    C668 Standard Specification for Asbestos-Cement Transmission Pipe

    C725 Standard Specification for Semidense Mineral Fiber Siding

    C746 Standard Specification for Corrugated Asbestos-Cement Sheets for Bulkheading

    C875 Standard Specification for Asbestos-Cement Conduit

    C966 Standard Guide for Installing Asbestos-Cement Nonpressure Pipe

    D1061/D1061M Standard Specification for Asbestos Lap

    D1118/D1118M Standard Test Method for Magnetic Rating of Asbestos Fiber and Asbestos Textiles

    D1571/D1571M Standard Specification for Woven Asbestos Cloth

    D1573/D1573M Standard Test Method for Heat Aging of Asbestos Textiles

    D1918/D1918M Standard Test Method for Asbestos Content of Asbestos Textiles

    D2100/D2100M Standard Specification for Asbestos Textiles Used for Electrical Insulating Purposes

    D2589/D2589M Standard Test Method for McNett Wet Classification of Dual Asbestos Fiber

    D2590/D2590M Standard Test Method for Sampling Chrysotile Asbestos

    D2752/D2752M Standard Test Methods for Air Permeability of Asbestos Fibers

    D2946 Standard Terminology for Asbestos and Asbestos-Cement Products

    D2947/D2947M Standard Test Method for Screen Analysis of Asbestos Fibers

    D2985/D2985M Standard Test Method for Color of Asbestos

    D2987/D2987M Standard Test Method for Moisture Content of Asbestos Fiber

    D299/D299M Standard Specification for Asbestos Yarns

    D315/D315M Standard Specification for Woven Asbestos Tape

    D3639/D3639M Standard Test Method for Classification of Asbestos by Quebec Standard Test

    D375/D375M Standard Specification for Asbestos Roving

    D3752 Standard Test Method for Strength Imparted by Asbestos to a Cementitious Matrix

    D3880/D3880M Standard Test Method for Asbestos Strength Units

    D628/D628M Standard Specification for Asbestos Tubular Sleeving


    C17.02 - Non-Asbestos Fiber Cement Products

    C1154 Standard Terminology for Non-Asbestos Fiber-Reinforced Cement Products

    C1185 Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards

    C1186 Standard Specification for Flat Fiber-Cement Sheets

    C1225 Standard Specification for Fiber-Cement Roofing Shingles, Shakes, and Slates

    C1288 Standard Specification for Discrete Non-Asbestos Fiber-Cement Interior Substrate Sheets

    C1447/C1447M Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe

    C1448/C1448M Standard Specification for Non-Asbestos Fiber-Cement Conduit

    C1449/C1449M Standard Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe

    C1450/C1450M Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe

    C1459 Standard Specification for Performance of Non-Asbestos Fiber-Reinforced Cement Shake, Shingle, and Slate Roofing Systems

    C1530/C1530M Standard Specification for Non-Asbestos Fiber-Cement Roofing Shakes, Shingles, and Slates with Designed Varying Profiles and Thicknesses


    C16.40 - Insulation Systems

    C1146 Standard Guide for Prefabricated Panel and H–bar Insulation Systems for Vessels, Ducts and Equipment Operating at Temperatures Above Ambient Air

    C1409 Standard Guide for Measuring and Estimating Quantities of Insulated Piping and Components

    C1423 Standard Guide for Selecting Jacketing Materials for Thermal Insulation

    C1639 Standard Specification for Fabrication of Cellular Glass Pipe and Tubing Insulation

    C1695 Standard Specification for Fabrication of Flexible Removable and Reusable Blanket Insulation for Hot Service

    C1696 Standard Guide for Industrial Thermal Insulation Systems

    C1710 Standard Guide for Installation of Flexible Closed Cell Preformed Insulation in Tube and Sheet Form

    C1729 Standard Specification for Aluminum Jacketing for Insulation

    C1729M Standard Specification for Aluminum Jacketing for Insulation

    C1767 Standard Specification for Stainless Steel Jacketing for Insulation

    C1767M Standard Specification for Stainless Steel Jacketing for Insulation

    C1775 Standard Specification for Laminate Protective Jacket and Tape for Use over Thermal Insulation for Outdoor Applications

    C1809 Standard Practice for Preparation of Specimens and Reporting of Results for Permeance Testing of Pressure Sensitive Adhesive Sealed Joints in Insulation Vapor Retarders

    C846 Standard Practice for Application of Cellulosic Fiber Insulating Board for Wall Sheathing

    C930 Standard Classification of Potential Health and Safety Concerns Associated With Thermal Insulation Materials and Accessories

    C945 Standard Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels

    C950/C950M Standard Practice for Repair of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels


    C16.33 - Insulation Finishes and Moisture

    C1104/C1104M Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation

    C1134 Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion

    C1136 Standard Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation

    C1258 Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation

    C1263 Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders

    C1498 Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials

    C1511 Standard Test Method for Determining the Water Retention (Repellency) Characteristics of Glass Fiber Insulation (Aircraft Type)

    C1512 Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products

    C1559 Standard Test Method for Determining Wicking of Glass Fiber Blanket Insulation (Aircraft Type)

    C1616 Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight

    C1699 Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates

    C1763 Standard Test Method for Water Absorption by Immersion of Thermal Insulation Materials

    C1785 Standard Test Method for Concentration of Pinhole Detections in Moisture Barriers on Metal Jacketing

    C1794 Standard Test Methods for Determination of the Water Absorption Coefficient by Partial Immersion

    C419 Standard Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings

    C461 Standard Test Methods for Mastics and Coatings Used With Thermal Insulation

    C488 Standard Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation

    C647 Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation

    C755 Standard Practice for Selection of Water Vapor Retarders for Thermal Insulation

    C916 Standard Specification for Adhesives for Duct Thermal Insulation

    C921 Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation

    E96/E96M Standard Test Methods for Water Vapor Transmission of Materials


    C16.30 - Thermal Measurement

    C1041 Standard Practice for In-Situ Measurements of Heat Flux in Industrial Thermal Insulation Using Heat Flux Transducers

    C1043 Standard Practice for Guarded-Hot-Plate Design Using Circular Line-Heat Sources

    C1044 Standard Practice for Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided Mode

    C1045 Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions

    C1046 Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components

    C1055 Standard Guide for Heated System Surface Conditions that Produce Contact Burn Injuries

    C1057 Standard Practice for Determination of Skin Contact Temperature from Heated Surfaces Using a Mathematical Model and Thermesthesiometer

    C1058/C1058M Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation

    C1060 Standard Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings

    C1114 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus

    C1129 Standard Practice for Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges

    C1130 Standard Practice for Calibrating Thin Heat Flux Transducers

    C1153 Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging

    C1155 Standard Practice for Determining Thermal Resistance of Building Envelope Components from the In-Situ Data

    C1199 Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods

    C1303/C1303M Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation

    C1363 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus

    C1371 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers

    C1373/C1373M Standard Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions

    C1549 Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer

    C1558 Standard Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation

    C1667 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Resistivity of Vacuum Panels

    C177 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus

    C1774 Standard Guide for Thermal Performance Testing of Cryogenic Insulation Systems

    C1784 Standard Test Method for Using a Heat Flow Meter Apparatus for Measuring Thermal Storage Properties of Phase Change Materials and Products

    C335/C335M Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation

    C518 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

    C653 Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation

    C680 Standard Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat, Cylindrical, and Spherical Systems by Use of Computer Programs

    C687 Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation

    C835 Standard Test Method for Total Hemispherical Emittance of Surfaces up to 1400°C


    C16.31 - Chemical and Physical Properties

    C1304 Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials

    C1338 Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings

    C1485 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using an Electric Radiant Heat Energy Source

    C1617 Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals

    C163 Standard Practice for Mixing Thermal Insulating Cement Samples

    C166 Standard Test Method for Covering Capacity and Volume Change Upon Drying of Thermal Insulating Cement

    C356 Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat

    C390 Standard Practice for Sampling and Acceptance of Thermal Insulation Lots

    C411 Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation

    C447 Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations

    C692 Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel

    C870 Standard Practice for Conditioning of Thermal Insulating Materials

    C871 Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions


    C16.32 - Mechanical Properties

    C1101/C1101M Standard Test Methods for Classifying the Flexibility or Rigidity of Mineral Fiber Blanket and Board Insulation

    C1335 Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation

    C1374 Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation

    C1574 Standard Guide for Determining Blown Density of Pneumatically Applied Loose-Fill Mineral Fiber Thermal Insulation

    C165 Standard Test Method for Measuring Compressive Properties of Thermal Insulations

    C167 Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations

    C203 Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation

    C209 Standard Test Methods for Cellulosic Fiber Insulating Board

    C240 Standard Test Methods of Testing Cellular Glass Insulation Block

    C302 Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation

    C303 Standard Test Method for Dimensions and Density of Preformed Block and Board-Type Thermal Insulation

    C421 Standard Test Method for Tumbling Friability of Preformed Block-Type and Preformed Pipe-Covering-Type Thermal Insulation

    C520 Standard Test Methods for Density of Granular Loose Fill Insulations

    C550 Standard Test Method for Measuring Trueness and Squareness of Rigid Block and Board Thermal Insulation

    C686 Standard Test Method for Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation


    C16.23 - Blanket and Loose Fill Insulation

    C1014 Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation

    C1015 Standard Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation

    C1071 Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)

    C1086 Standard Specification for Glass Fiber Mechanically Bonded Felt Thermal Insulation

    C1139 Standard Specification for Fibrous Glass Thermal Insulation and Sound Absorbing Blanket and Board for Military Applications

    C1149 Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation

    C1290 Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts

    C1320 Standard Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame Construction

    C1497 Standard Specification for Cellulosic Fiber Stabilized Thermal Insulation

    C1630 Standard Guide for Development of Coverage Charts for Loose-Fill Thermal Building Insulations

    C1685 Standard Specification for Pneumatically Applied High-Temperature Fiber Thermal Insulation for Industrial Applications

    C1728 Standard Specification for Flexible Aerogel Insulation

    C516 Standard Specification for Vermiculite Loose Fill Thermal Insulation

    C549 Standard Specification for Perlite Loose Fill Insulation

    C553 Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications

    C592 Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)

    C665 Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing

    C739 Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation

    C764 Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation

    C800 Standard Specification for Fibrous Glass Blanket Insulation (Aircraft Type)

    C892 Standard Specification for High-Temperature Fiber Blanket Thermal Insulation

    C991 Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings


    C16.22 - Organic and Nonhomogeneous Inorganic Thermal Insulations

    C1029 Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation

    C1126 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation

    C1289 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board

    C1410 Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation

    C1427 Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form

    C1482 Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation

    C1484 Standard Specification for Vacuum Insulation Panels

    C1534 Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems

    C1594 Standard Specification for Polyimide Rigid Cellular Thermal Insulation

    C208 Standard Specification for Cellulosic Fiber Insulating Board

    C534/C534M Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form

    C578 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation

    C591 Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation

    C728 Standard Specification for Perlite Thermal Insulation Board


    C16.21 - Reflective Insulation

    C1224 Standard Specification for Reflective Insulation for Building Applications

    C1313/C1313M Standard Specification for Sheet Radiant Barriers for Building Construction Applications

    C1321 Standard Practice for Installation and Use of Interior Radiation Control Coating Systems (IRCCS) in Building Construction

    C1340/C1340M Standard Practice for Estimation of Heat Gain or Loss Through Ceilings Under Attics Containing Radiant Barriers by Use of a Computer Program

    C1483/C1483M Standard Specification for Exterior Solar Radiation Control Coatings on Buildings

    C1668 Standard Specification for Externally Applied Reflective Insulation Systems on Rigid Duct in Heating, Ventilation, and Air Conditioning (HVAC) Systems

    C1743 Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Residential Building Construction

    C1744 Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Commercial/Industrial Building Construction

    C667 Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air

    C727 Standard Practice for Installation and Use of Reflective Insulation in Building Constructions

    C740/C740M Standard Guide for Evacuated Reflective Insulation In Cryogenic Service


    C16.20 - Homogeneous Inorganic Thermal Insulations

    C1393 Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks

    C1676/C1676M Standard Specification for Microporous Thermal Insulation

    C195 Standard Specification for Mineral Fiber Thermal Insulating Cement

    C196 Standard Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement

    C449 Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement

    C450 Standard Practice for Fabrication of Thermal Insulating Fitting Covers for NPS Piping, and Vessel Lagging

    C533 Standard Specification for Calcium Silicate Block and Pipe Thermal Insulation

    C547 Standard Specification for Mineral Fiber Pipe Insulation

    C552 Standard Specification for Cellular Glass Thermal Insulation

    C585 Standard Practice for Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing

    C610 Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation

    C612 Standard Specification for Mineral Fiber Block and Board Thermal Insulation

    C656 Standard Specification for Structural Insulating Board, Calcium Silicate

    C726 Standard Specification for Mineral Wool Roof Insulation Board

    C795 Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel

    C929 Standard Practice for Handling, Transporting, Shipping, Storage, Receiving, and Application of Thermal Insulation Materials For Use in Contact with Austenitic Stainless Steel


    C15.04 - Research

    C1006 Standard Test Method for Splitting Tensile Strength of Masonry Units

    C1072 Standard Test Methods for Measurement of Masonry Flexural Bond Strength

    C1196 Standard Test Method for In Situ Compressive Stress Within Solid Unit Masonry Estimated Using Flatjack Measurements

    C1197 Standard Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method

    C1314 Standard Test Method for Compressive Strength of Masonry Prisms

    C1357 Standard Test Methods for Evaluating Masonry Bond Strength

    C1531 Standard Test Methods for In Situ Measurement Of Masonry Mortar Joint Shear Strength Index

    C1532/C1532M Standard Practice for Selection, Removal, and Shipment of Manufactured Masonry Units and Masonry Specimens from Existing Construction

    C1552 Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing

    C1587 Standard Practice for Preparation of Field Removed Manufactured Masonry Units and Masonry Specimens for Testing

    C1601 Standard Test Method for Field Determination of Water Penetration of Masonry Wall Surfaces

    C1715 Standard Test Method for Evaluation of Water Leakage Performance of Masonry Wall Drainage Systems

    C1716/C1716M Standard Specification for Compression Testing Machine Requirements for Concrete Masonry Units, Related Units, and Prisms

    C1717 Standard Test Methods for Conducting Strength Tests of Masonry Wall Panels

    C1781/C1781M Standard Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems

    C952 Standard Test Method for Bond Strength of Mortar to Masonry Units

    E514/E514M Standard Test Method for Water Penetration and Leakage Through Masonry

    E518/E518M Standard Test Methods for Flexural Bond Strength of Masonry

    E519/E519M Standard Test Method for Diagonal Tension (Shear) in Masonry Assemblages


    C15.03 - Concrete Masonry Units and Related Units

    C1262 Standard Test Method for Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units

    C129 Standard Specification for Nonloadbearing Concrete Masonry Units

    C1319 Standard Specification for Concrete Grid Paving Units

    C1372 Standard Specification for Dry-Cast Segmental Retaining Wall Units

    C139 Standard Specification for Concrete Masonry Units for Construction of Catch Basins and Manholes

    C140/C140M Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units

    C1491 Standard Specification for Concrete Roof Pavers

    C1623 Standard Specification for Manufactured Concrete Masonry Lintels

    C1634 Standard Specification for Concrete Facing Brick

    C1645/C1645M Standard Test Method for Freeze-thaw and De-icing Salt Durability of Solid Concrete Interlocking Paving Units

    C1670/C1670M Standard Specification for Adhered Manufactured Stone Masonry Veneer Units

    C1731 Standard Specification for Concrete Floor Tile

    C1790 Standard Specification for Fly Ash Facing Brick

    C426 Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units

    C55 Standard Specification for Concrete Building Brick

    C73 Standard Specification for Calcium Silicate Brick (Sand-Lime Brick)

    C744 Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units

    C90 Standard Specification for Loadbearing Concrete Masonry Units

    C936/C936M Standard Specification for Solid Concrete Interlocking Paving Units


    C15.02 - Brick and Structural Clay Tile

    C1088 Standard Specification for Thin Veneer Brick Units Made From Clay or Shale

    C126 Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units

    C1261 Standard Specification for Firebox Brick for Residential Fireplaces

    C1272 Standard Specification for Heavy Vehicular Paving Brick

    C1405 Standard Specification for Glazed Brick (Single Fired, Brick Units)

    C212 Standard Specification for Structural Clay Facing Tile

    C216 Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)

    C279 Standard Specification for Chemical-Resistant Masonry Units

    C32 Standard Specification for Sewer and Manhole Brick (Made From Clay or Shale)

    C34 Standard Specification for Structural Clay Load-Bearing Wall Tile

    C410 Standard Specification for Industrial Floor Brick

    C530 Standard Specification for Structural Clay Nonloadbearing Screen Tile

    C56 Standard Specification for Structural Clay Nonloadbearing Tile

    C62 Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale)

    C652 Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale)

    C67 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile

    C902 Standard Specification for Pedestrian and Light Traffic Paving Brick

    C980 Standard Specification for Industrial Chimney Lining Brick


    C14.08 - Flat Glass

    C1036 Standard Specification for Flat Glass

    C1048 Standard Specification for Heat-Strengthened and Fully Tempered Flat Glass

    C1172 Standard Specification for Laminated Architectural Flat Glass

    C1279 Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass

    C1349 Standard Specification for Architectural Flat Glass Clad Polycarbonate

    C1376 Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass

    C1422/C1422M Standard Specification for Chemically Strengthened Flat Glass

    C1443 Standard Specification for Glasses, Portlight, Circular, Fully Tempered

    C1464 Standard Specification for Bent Glass

    C1503 Standard Specification for Silvered Flat Glass Mirror


    C13.09 - Methods of Test

    C1103 Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines

    C1103M Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)

    C1214 Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method

    C1214M Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric)

    C1618 Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure

    C1618M Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure (Metric)

    C497 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile

    C497M Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile (Metric)

    C969 Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines

    C969M Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)


    C13.08 - Joints for Precast Concrete Structures

    C1619 Standard Specification for Elastomeric Seals for Joining Concrete Structures

    C1628 Standard Specification for Joints for Concrete Gravity Flow Sewer Pipe, Using Rubber Gaskets

    C1677 Standard Specification for Joints for Concrete Box, Using Rubber Gaskets

    C443 Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets

    C443M Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets (Metric)

    C877 Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections

    C877M Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections (Metric)

    C990 Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants

    C990M Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants (Metric)


    C13.07 - Acceptance Specifications and Precast Concrete Box Sections

    C1433 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers

    C1433M Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric)

    C1504 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains

    C1504M Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric)

    C1577 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD

    C1786 Standard Specification for Segmental Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD


    C13.06 - Manholes and Specials

    C1244 Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill

    C1244M Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill (Metric)

    C1478 Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals

    C1478M Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals (Metric)

    C478 Standard Specification for Circular Precast Reinforced Concrete Manhole Sections

    C478M Standard Specification for Circular Precast Reinforced Concrete Manhole Sections (Metric)

    C923 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals

    C923M Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals (Metric)


    C13.05 - Special Projects

    C1131 Standard Practice for Least Cost (Life Cycle) Analysis of Concrete Culvert, Storm Sewer, and Sanitary Sewer Systems

    C1417 Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design

    C1417M Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric)

    C1479 Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations

    C1479M Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations (Metric)

    C1675 Standard Practice for Installation of Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers


    C13.02 - Reinforced Sewer and Culvert Pipe

    C1765 Standard Specification for Steel Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe

    C506 Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe

    C506M Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric)

    C507 Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe

    C507M Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric)

    C655 Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe

    C655M Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric)

    C76 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe

    C76M Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)


    C13.01 - Non-Reinforced Concrete Sewer, Drain and Irrigation Pipe

    C118 Standard Specification for Concrete Pipe for Irrigation or Drainage

    C118M Standard Specification for Concrete Pipe for Irrigation or Drainage (Metric)

    C14 Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe

    C14M Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe (Metric)

    C412 Standard Specification for Concrete Drain Tile

    C412M Standard Specification for Concrete Drain Tile (Metric)

    C444 Standard Specification for Perforated Concrete Pipe

    C444M Standard Specification for Perforated Concrete Pipe (Metric)

    C505 Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints

    C505M Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints (Metric)

    C654 Standard Specification for Porous Concrete Pipe

    C654M Standard Specification for Porous Concrete Pipe (Metric)

    C985 Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe

    C985M Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe (Metric)


    C11.03 - Specifications for the Application of Gypsum and Other Products in Assemblies

    C1007 Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories

    C1063 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster

    C1280 Standard Specification for Application of Exterior Gypsum Panel Products for Use as Sheathing

    C1467/C1467M Standard Specification for the Installation of Molded Glass Fiber Reinforced Gypsum Parts

    C1546 Standard Guide for Installation of Gypsum Products in Concealed Radiant Ceiling Heating Systems

    C1787 Standard Specification for Installation of Non Metallic Plaster Bases (Lath) Used with Portland Cement Based Plaster in Vertical Wall Applications

    C754 Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products

    C840 Standard Specification for Application and Finishing of Gypsum Board

    C841 Standard Specification for Installation of Interior Lathing and Furring

    C842 Standard Specification for Application of Interior Gypsum Plaster

    C843 Standard Specification for Application of Gypsum Veneer Plaster

    C844 Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster

    C926 Standard Specification for Application of Portland Cement-Based Plaster

    C956 Standard Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete


    C11.02 - Specifications and Test Methods for Accessories and Related Products

    C1002 Standard Specification for Steel Self-Piercing Tapping Screws for Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs

    C1032 Standard Specification for Woven Wire Plaster Base

    C1047 Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base

    C1513 Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections

    C1764 Standard Test Methods for Non Metallic Plaster Bases (Lath) Used with Portland Cement Based Plaster in Vertical Wall Applications

    C1788 Standard Specification for Non Metallic Plaster Bases (Lath) Used with Portland Cement Based Plaster in Vertical Wall Applications

    C35 Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster

    C474 Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction

    C475/C475M Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board

    C514 Standard Specification for Nails for the Application of Gypsum Board

    C631 Standard Specification for Bonding Compounds for Interior Gypsum Plastering

    C645 Standard Specification for Nonstructural Steel Framing Members

    C847 Standard Specification for Metal Lath

    C897 Standard Specification for Aggregate for Job-Mixed Portland Cement-Based Plasters

    C932 Standard Specification for Surface-Applied Bonding Compounds for Exterior Plastering

    C933 Standard Specification for Welded Wire Lath

    C954 Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness

    C955 Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases


    C11.01 - Specifications and Test Methods for Gypsum Products

    C1177/C1177M Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing

    C1178/C1178M Standard Specification for Coated Glass Mat Water-Resistant Gypsum Backing Panel

    C1264 Standard Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling, and Storage of Gypsum Panel Products

    C1278/C1278M Standard Specification for Fiber-Reinforced Gypsum Panel

    C1355/C1355M Standard Specification for Glass Fiber Reinforced Gypsum Composites

    C1381/C1381M Standard Specification for Molded Glass Fiber Reinforced Gypsum Parts

    C1396/C1396M Standard Specification for Gypsum Board

    C1629/C1629M Standard Classification for Abuse-Resistant Nondecorated Interior Gypsum Panel Products and Fiber-Reinforced Cement Panels

    C1658/C1658M Standard Specification for Glass Mat Gypsum Panels

    C1766 Standard Specification for Factory-Laminated Gypsum Panel Products

    C1789 Standard Test Method for Calibration of Hand-Held Moisture Meters on Gypsum Panels

    C22/C22M Standard Specification for Gypsum

    C28/C28M Standard Specification for Gypsum Plasters

    C317/C317M Standard Specification for Gypsum Concrete

    C318/C318M Standard Specification for Gypsum Formboard

    C471M Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric)

    C472 Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete

    C473 Standard Test Methods for Physical Testing of Gypsum Panel Products

    C587 Standard Specification for Gypsum Veneer Plaster

    C59/C59M Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster

    C61/C61M Standard Specification for Gypsum Keene's Cement


    C09.94 - Evaluation of Data (Joint C09 and C01)

    C1067 Standard Practice for Conducting a Ruggedness Evaluation or Screening Program for Test Methods for Construction Materials

    C1451 Standard Practice for Determining Uniformity of Ingredients of Concrete From a Single Source

    C670 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials

    C802 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials


    C09.69 - Miscellaneous Tests

    C1084 Standard Test Method for Portland-Cement Content of Hardened Hydraulic-Cement Concrete

    C1152/C1152M Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete

    C1218/C1218M Standard Test Method for Water-Soluble Chloride in Mortar and Concrete

    C1524 Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method)

    C1542/C1542M Standard Test Method for Measuring Length of Concrete Cores

    C1580 Standard Test Method for Water-Soluble Sulfate in Soil

    C174/C174M Standard Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores


    C09.68 - Volume Change

    C1090 Standard Test Method for Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout

    C157/C157M Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete

    C1581/C1581M Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage

    C1698 Standard Test Method for Autogenous Strain of Cement Paste and Mortar

    C341/C341M Standard Practice for Preparation and Conditioning of Cast, Drilled, or Sawed Specimens of Hydraulic-Cement Mortar and Concrete Used for Length Change Measurements

    C827/C827M Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures

    C878/C878M Standard Test Method for Restrained Expansion of Shrinkage-Compensating Concrete


    C09.66 - Concrete's Resistance to Fluid Penetration

    C1202 Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration

    C1543 Standard Test Method for Determining the Penetration of Chloride Ion into Concrete by Ponding

    C1556 Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion

    C1585 Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes

    C1757 Standard Test Method for Determination of One-Point, Bulk Water Sorption of Dried Concrete

    C1760 Standard Test Method for Bulk Electrical Conductivity of Hardened Concrete

    C1792 Standard Test Method for Measurement of Mass Loss versus Time for One-Dimensional Drying of Saturated Concretes

    C642 Standard Test Method for Density, Absorption, and Voids in Hardened Concrete


    C09.65 - Petrography

    C1723 Standard Guide for Examination of Hardened Concrete Using Scanning Electron Microscopy

    C294 Standard Descriptive Nomenclature for Constituents of Concrete Aggregates

    C295/C295M Standard Guide for Petrographic Examination of Aggregates for Concrete

    C457/C457M Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete

    C823/C823M Standard Practice for Examination and Sampling of Hardened Concrete in Constructions

    C856 Standard Practice for Petrographic Examination of Hardened Concrete


    C09.64 - Nondestructive and In-Place Testing

    C1074 Standard Practice for Estimating Concrete Strength by the Maturity Method

    C1383 Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method

    C1740 Standard Practice for Evaluating the Condition of Concrete Plates Using the Impulse-Response Method

    C215 Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Resonant Frequencies of Concrete Specimens

    C597 Standard Test Method for Pulse Velocity Through Concrete

    C803/C803M Standard Test Method for Penetration Resistance of Hardened Concrete

    C805/C805M Standard Test Method for Rebound Number of Hardened Concrete

    C900 Standard Test Method for Pullout Strength of Hardened Concrete


    C09.62 - Abrasion Testing

    C1138M Standard Test Method for Abrasion Resistance of Concrete (Underwater Method)

    C418 Standard Test Method for Abrasion Resistance of Concrete by Sandblasting

    C779/C779M Standard Test Method for Abrasion Resistance of Horizontal Concrete Surfaces

    C944/C944M Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method


    C09.61 - Testing for Strength

    C1231/C1231M Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders

    C1768/C1768M Standard Practice for Accelerated Curing of Concrete Cylinders

    C192/C192M Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory

    C293/C293M Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)

    C31/C31M Standard Practice for Making and Curing Concrete Test Specimens in the Field

    C39/C39M Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens

    C42/C42M Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete

    C469/C469M Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression

    C470/C470M Standard Specification for Molds for Forming Concrete Test Cylinders Vertically

    C496/C496M Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens

    C512/C512M Standard Test Method for Creep of Concrete in Compression

    C617/C617M Standard Practice for Capping Cylindrical Concrete Specimens

    C78/C78M Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)

    C873/C873M Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds

    C918/C918M Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength


    C09.60 - Testing Fresh Concrete

    C1064/C1064M Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete

    C138/C138M Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete

    C143/C143M Standard Test Method for Slump of Hydraulic-Cement Concrete

    C172/C172M Standard Practice for Sampling Freshly Mixed Concrete

    C173/C173M Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method

    C231/C231M Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method

    C232/C232M Standard Test Method for Bleeding of Concrete


    C09.48 - Performance of Cementitious Materials and Admixture Combinations

    C1679 Standard Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry


    C09.47 - Self-Consolidating Concrete

    C1610/C1610M Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique

    C1611/C1611M Standard Test Method for Slump Flow of Self-Consolidating Concrete

    C1621/C1621M Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring

    C1712 Standard Test Method for Rapid Assessment of Static Segregation Resistance of Self-Consolidating Concrete Using Penetration Test

    C1758/C1758M Standard Practice for Fabricating Test Specimens with Self-Consolidating Concrete


    C09.46 - Shotcrete

    C1140/C1140M Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels

    C1141/C1141M Standard Specification for Admixtures for Shotcrete

    C1385/C1385M Standard Practice for Sampling Materials for Shotcrete

    C1436 Standard Specification for Materials for Shotcrete

    C1480/C1480M Standard Specification for Packaged, Pre-Blended, Dry, Combined Materials for Use in Wet or Dry Shotcrete Application

    C1604/C1604M Standard Test Method for Obtaining and Testing Drilled Cores of Shotcrete


    C09.45 - Roller-Compacted Concrete

    C1040/C1040M Standard Test Methods for In-Place Density of Unhardened and Hardened Concrete, Including Roller Compacted Concrete, By Nuclear Methods

    C1170/C1170M Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table

    C1176/C1176M Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table

    C1245/C1245M Standard Test Method for Determining Relative Bond Strength Between Hardened Roller Compacted Concrete Lifts (Point Load Test)

    C1435/C1435M Standard Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer


    C09.42 - Fiber-Reinforced Concrete

    C1116/C1116M Standard Specification for Fiber-Reinforced Concrete

    C1399/C1399M Standard Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete

    C1550 Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)

    C1579 Standard Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert)

    C1609/C1609M Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)


    C09.41 - Hydraulic Cement Grouts

    C1181 Standard Test Methods for Compressive Creep of Chemical-Resistant Polymer Machinery Grouts

    C1339 Standard Test Method for Flowability and Bearing Area of Chemical-Resistant Polymer Machinery Grouts

    C1741 Standard Test Method for Bleed Stability of Cementitious Post-Tensioning Tendon Grout

    C637 Standard Specification for Aggregates for Radiation-Shielding Concrete

    C638 Standard Descriptive Nomenclature of Constituents of Aggregates for Radiation-Shielding Concrete

    C937 Standard Specification for Grout Fluidifier for Preplaced-Aggregate Concrete

    C938 Standard Practice for Proportioning Grout Mixtures for Preplaced-Aggregate Concrete

    C939 Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)

    C940 Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory

    C941 Standard Test Method for Water Retentivity of Grout Mixtures for Preplaced-Aggregate Concrete in the Laboratory

    C942 Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory

    C943 Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory

    C953 Standard Test Method for Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory


    C09.40 - Ready-Mixed Concrete

    C1602/C1602M Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete

    C1603 Standard Test Method for Measurement of Solids in Water

    C685/C685M Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing

    C94/C94M Standard Specification for Ready-Mixed Concrete


    C09.26 - Chemical Reactions

    C1105 Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction

    C1260 Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)

    C1293 Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction

    C1567 Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)

    C227 Standard Test Method for Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method)

    C289 Standard Test Method for Potential Alkali-Silica Reactivity of Aggregates (Chemical Method)

    C441/C441M Standard Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction

    C586 Standard Test Method for Potential Alkali Reactivity of Carbonate Rocks as Concrete Aggregates (Rock-Cylinder Method)


    C09.25 - Organic Materials for Bonding

    C1059/C1059M Standard Specification for Latex Agents for Bonding Fresh To Hardened Concrete

    C1583/C1583M Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)

    C881/C881M Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete

    C882/C882M Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear

    C884/C884M Standard Test Method for Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay


    C09.24 - Supplementary Cementitious Materials

    C1240 Standard Specification for Silica Fume Used in Cementitious Mixtures

    C1697 Standard Specification for Blended Supplementary Cementitious Materials

    C1709 Standard Guide for Evaluation of Alternative Supplementary Cementitious Materials (ASCM) for Use in Concrete

    C311/C311M Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete

    C618 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete


    C09.23 - Chemical Admixtures

    C1017/C1017M Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete

    C1582/C1582M Standard Specification for Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete

    C1622/C1622M Standard Specification for Cold-Weather Admixture Systems

    C233/C233M Standard Test Method for Air-Entraining Admixtures for Concrete

    C260/C260M Standard Specification for Air-Entraining Admixtures for Concrete

    C403/C403M Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance

    C494/C494M Standard Specification for Chemical Admixtures for Concrete

    C796/C796M Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam

    C869/C869M Standard Specification for Foaming Agents Used in Making Preformed Foam for Cellular Concrete

    C979/C979M Standard Specification for Pigments for Integrally Colored Concrete


    C09.22 - Materials Applied to New Concrete Surfaces

    C1315 Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete

    C156 Standard Test Method for Water Loss [from a Mortar Specimen] Through Liquid Membrane-Forming Curing Compounds for Concrete

    C171 Standard Specification for Sheet Materials for Curing Concrete

    C309 Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete


    C09.21 - Lightweight Aggregates and Concrete

    C1761/C1761M Standard Specification for Lightweight Aggregate for Internal Curing of Concrete

    C330/C330M Standard Specification for Lightweight Aggregates for Structural Concrete

    C331/C331M Standard Specification for Lightweight Aggregates for Concrete Masonry Units

    C332 Standard Specification for Lightweight Aggregates for Insulating Concrete

    C495/C495M Standard Test Method for Compressive Strength of Lightweight Insulating Concrete

    C513/C513M Standard Test Method for Obtaining and Testing Specimens of Hardened Lightweight Insulating Concrete for Compressive Strength

    C567/C567M Standard Test Method for Determining Density of Structural Lightweight Concrete

    C641 Standard Test Method for Iron Staining Materials in Lightweight Concrete Aggregates


    C09.20 - Normal Weight Aggregates

    C117 Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing

    C123/C123M Standard Test Method for Lightweight Particles in Aggregate

    C127 Standard Test Method for Relative Density (Specific Gravity) and Absorption of Coarse Aggregate

    C128 Standard Test Method for Relative Density (Specific Gravity) and Absorption of Fine Aggregate

    C131/C131M Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine

    C136/C136M Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates

    C142/C142M Standard Test Method for Clay Lumps and Friable Particles in Aggregates

    C1777 Standard Test Method for Rapid Determination of the Methylene Blue Value for Fine Aggregate or Mineral Filler Using a Colorimeter

    C29/C29M Standard Test Method for Bulk Density ("Unit Weight") and Voids in Aggregate

    C33/C33M Standard Specification for Concrete Aggregates

    C40/C40M Standard Test Method for Organic Impurities in Fine Aggregates for Concrete

    C535 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine

    C566 Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying

    C70 Standard Test Method for Surface Moisture in Fine Aggregate

    C702/C702M Standard Practice for Reducing Samples of Aggregate to Testing Size

    C87/C87M Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar

    C88 Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate


    C07.02 - Specifications and Guidelines

    C1097 Standard Specification for Hydrated Lime for Use in Asphalt Cement or Bituminous Paving Mixtures

    C1164 Standard Practice for Evaluation of Limestone or Lime Uniformity From a Single Source

    C141/C141M Standard Specification for Hydrated Hydraulic Lime for Structural Purposes

    C1489 Standard Specification for Lime Putty for Structural Purposes

    C1529 Standard Specification for Quicklime, Hydrated Lime, and Limestone for Environmental Uses

    C1707 Standard Specification for Pozzolanic Hydraulic Lime for Structural Purposes

    C206 Standard Specification for Finishing Hydrated Lime

    C207 Standard Specification for Hydrated Lime for Masonry Purposes

    C5 Standard Specification for Quicklime for Structural Purposes

    C593 Standard Specification for Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization

    C602 Standard Specification for Agricultural Liming Materials

    C706 Standard Specification for Limestone for Animal Feed Use

    C737 Standard Specification for Limestone for Dusting of Coal Mines

    C821 Standard Specification for Lime for Use with Pozzolans

    C911 Standard Specification for Quicklime, Hydrated Lime, and Limestone for Selected Chemical and Industrial Uses

    C977 Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization

    D6249 Standard Guide for Alkaline Stabilization of Wastewater Treatment Plant Residuals


    C04.20 - Methods of Test and Specifications

    C1091 Standard Test Method for Hydrostatic Infiltration Testing of Vitrified Clay Pipe Lines

    C12 Standard Practice for Installing Vitrified Clay Pipe Lines

    C1208/C1208M Standard Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels

    C1283 Standard Practice for Installing Clay Flue Lining

    C159 Standard Specification for Vitrified Clay Filter Blocks

    C301 Standard Test Methods for Vitrified Clay Pipe

    C315 Standard Specification for Clay Flue Liners and Chimney Pots

    C4 Standard Specification for Clay Drain Tile and Perforated Clay Drain Tile

    C425 Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings

    C479 Standard Specification for Vitrified Clay Liner Plates

    C700 Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated

    C828 Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines


    C03.02 - Monolithics, Grouts and Polymer Concretes

    C1159 Standard Specification for Sulfur Polymer Cement and Sulfur Modifier for Use in Chemical-Resistant, Rigid Sulfur Concrete

    C1160 Standard Specification for Chemical-Resistant Carbon Brick

    C1312 Standard Practice for Making and Conditioning Chemical-Resistant Sulfur Polymer Cement Concrete Test Specimens in the Laboratory

    C287 Standard Specification for Chemical-Resistant Sulfur Mortar

    C386 Standard Practice for Use of Chemical-Resistant Sulfur Mortar

    C395 Standard Specification for Chemical-Resistant Resin Mortars

    C397 Standard Practice for Use of Chemically Setting Chemical-Resistant Silicate and Silica Mortars

    C398 Standard Practice for Use of Hydraulic Cement Mortars in Chemical-Resistant Masonry

    C399 Standard Practice for Use of Chemical-Resistant Resin Mortars

    C466 Standard Specification for Chemically Setting Silicate and Silica Chemical-Resistant Mortars

    C658 Standard Specification for Chemical-Resistant Resin Grouts for Brick or Tile

    C723 Standard Practice for Chemical-Resistant Resin Grouts for Brick or Tile


    C01.31 - Volume Change

    C151/C151M Standard Test Method for Autoclave Expansion of Hydraulic Cement

    C1608 Standard Test Method for Chemical Shrinkage of Hydraulic Cement Paste

    C596 Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement


    C01.30 - Time of Set

    C191 Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle

    C266 Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles

    C359 Standard Test Method for Early Stiffening of Hydraulic Cement (Mortar Method)

    C451 Standard Test Method for Early Stiffening of Hydraulic Cement (Paste Method)

    C807 Standard Test Method for Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle


    C01.27 - Strength

    C109/C109M Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)

    C348 Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars

    C349 Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)

    C917 Standard Test Method for Evaluation of Cement Strength Uniformity From a Single Source


    C01.25 - Fineness

    C115/C115M Standard Test Method for Fineness of Portland Cement by the Turbidimeter

    C188 Standard Test Method for Density of Hydraulic Cement

    C204 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus

    C430 Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve

    C786/C786M Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-μm (No. 50), 150-μm (No. 100), and 75-μm (No. 200) Sieves by Wet Methods


    C01.22 - Workability

    C1437 Standard Test Method for Flow of Hydraulic Cement Mortar

    C1506 Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters

    C1738/C1738M Standard Practice for High-Shear Mixing of Hydraulic Cement Pastes

    C1749 Standard Guide for Measurement of the Rheological Properties of Hydraulic Cementious Paste Using a Rotational Rheometer

    C187 Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste

    C230/C230M Standard Specification for Flow Table for Use in Tests of Hydraulic Cement

    C305 Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency


    B07.08 - Corrugated Aluminum Pipe and Corrugated Aluminum Structural Plate

    B744/B744M Standard Specification for Aluminum Alloy Sheet for Corrugated Aluminum Pipe

    B745/B745M Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains

    B746/B746M Standard Specification for Corrugated Aluminum Alloy Structural Plate for Field-Bolted Pipe, Pipe-Arches, and Arches

    B788/B788M Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe

    B789/B789M Standard Practice for Installing Corrugated Aluminum Structural Plate Pipe for Culverts and Sewers

    B790/B790M Standard Practice for Structural Design of Corrugated Aluminum Pipe, Pipe-Arches, and Arches for Culverts, Storm Sewers, and Other Buried Conduits

    B864/B864M Standard Specification for Corrugated Aluminum Box Culverts


    B05.02 - Rod, Bar, Wire, Shapes and Forgings

    B124/B124M Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes

    B134/B134M Standard Specification for Brass Wire

    B138/B138M Standard Specification for Manganese Bronze Rod, Bar, and Shapes

    B139/B139M Standard Specification for Phosphor Bronze Rod, Bar, and Shapes

    B140/B140M Standard Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes

    B150/B150M Standard Specification for Aluminum Bronze Rod, Bar, and Shapes

    B151/B151M Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar

    B159/B159M Standard Specification for Phosphor Bronze Wire

    B16/B16M Standard Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines

    B187/B187M Standard Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and Shapes

    B196/B196M Standard Specification for Copper-Beryllium Alloy Rod and Bar

    B197/B197M Standard Specification for Copper-Beryllium Alloy Wire

    B206/B206M Standard Specification for Copper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy Wire

    B21/B21M Standard Specification for Naval Brass Rod, Bar, and Shapes

    B249/B249M Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings

    B250/B250M Standard Specification for General Requirements for Wrought Copper Alloy Wire

    B272 Standard Specification for Copper Flat Products with Finished (Rolled or Drawn) Edges (Flat Wire and Strip)

    B283/B283M Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)

    B301/B301M Standard Specification for Free-Cutting Copper Rod, Bar, Wire, and Shapes

    B371/B371M Standard Specification for Copper-Zinc-Silicon Alloy Rod

    B411/B411M Standard Specification for Copper-Nickel-Silicon Alloy Rod and Bar

    B441 Standard Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465)

    B453/B453M Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes

    B455 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes

    B570 Standard Specification for Copper-Beryllium Alloy (UNS Nos. C17000 and C17200) Forgings and Extrusions

    B870 Standard Specification for Copper-Beryllium Alloy Forgings and Extrusions Alloys (UNS Nos. C17500 and C17510)

    B927/B927M Standard Specification for Brass Rod, Bar, and Shapes

    B929 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Rod and Bar

    B967/B967M Standard Specification for Copper-Zinc-Tin-Bismuth Alloy Rod, Bar and Wire

    B974/B974M Standard Specification for Free-Cutting Bismuth Brass Rod, Bar and Wire

    B98/B98M Standard Specification for Copper-Silicon Alloy Rod, Bar and Shapes

    B981/B981M Standard Specification for Low Leaded Brass Rod, Bar and Shapes

    B99/B99M Standard Specification for Copper-Silicon Alloy Wire for General Applications

    F68 Standard Specification for Oxygen-Free Copper in Wrought Forms for Electron Devices


    B05.01 - Plate, Sheet, and Strip

    B100 Standard Specification for Wrought Copper-Alloy Bearing and Expansion Plates and Sheets for Bridge and Other Structural Use

    B101 Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction

    B103/B103M Standard Specification for Phosphor Bronze Plate, Sheet, Strip, and Rolled Bar

    B121/B121M Standard Specification for Leaded Brass Plate, Sheet, Strip, and Rolled Bar

    B122/B122M Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar

    B129 Standard Specification for Cartridge Brass Cartridge Case Cups

    B130 Standard Specification for Commercial Bronze Strip for Bullet Jackets

    B131 Standard Specification for Copper Alloy Bullet Jacket Cups

    B152/B152M Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar

    B169/B169M Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar

    B171/B171M Standard Specification for Copper-Alloy Plate and Sheet for Pressure Vessels, Condensers, and Heat Exchangers

    B19 Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks

    B194 Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar

    B248 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar

    B248M Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar (Metric)

    B36/B36M Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar

    B370 Standard Specification for Copper Sheet and Strip for Building Construction

    B422/B422M Standard Specification for Copper-Aluminum-Silicon-Cobalt Alloy, Copper-Nickel-Silicon-Magnesium Alloy, Copper-Nickel-Silicon Alloy, Copper-Nickel-Aluminum-Magnesium Alloy, and Copper-Nickel-Tin Alloy Sheet and Strip

    B432 Standard Specification for Copper and Copper Alloy Clad Steel Plate

    B465 Standard Specification for Copper-Iron Alloy Plate, Sheet, Strip, and Rolled Bar

    B506 Specification for Copper-Clad Stainless Steel Sheet and Strip for Building Construction

    B508 Standard Specification for Copper Alloy Strip for Flexible Metal Hose

    B534 Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar

    B569 Standard Specification for Brass Strip in Narrow Widths and Light Gage for Heat-Exchanger Tubing

    B591 Standard Specification for Copper-Zinc-Tin and Copper-Zinc-Tin-Iron-Nickel Alloys Plate, Sheet, Strip, and Rolled Bar

    B592 Standard Specification for Copper-Zinc-Aluminum-Cobalt Alloy, Copper-Zinc-Tin-Iron Alloy Plate, Sheet, Strip, and Rolled Bar

    B694 Standard Specification for Copper, Copper-Alloy, Copper-Clad Bronze (CCB), Copper-Clad Stainless Steel (CCS), and Copper-Clad Alloy Steel (CAS) Sheet and Strip for Electrical Cable Shielding

    B740 Standard Specification for Copper-Nickel-Tin Spinodal Alloy Strip

    B747 Standard Specification for Copper-Zirconium Alloy Sheet and Strip

    B768 Standard Specification for Copper-Cobalt-Beryllium Alloy and Copper-Nickel-Beryllium Alloy Strip and Sheet

    B882 Specification for Pre-Patinated Copper for Architectural Applications

    B888/B888M Standard Specification for Copper Alloy Strip for Use in Manufacture of Electrical Connectors or Spring Contacts

    B936 Standard Specification for Copper-Chromium-Iron-Titanium Alloy Plate, Sheet, Strip and Rolled Bar

    B96/B96M Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels


    A05.17 - Corrugated Steel Pipe Specifications

    A1042/A1042M Standard Specification for Composite Corrugated Steel Pipe for Sewers and Drains

    A742/A742M Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe

    A760/A760M Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains

    A761/A761M Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches

    A762/A762M Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains

    A796/A796M Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications

    A798/A798M Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications

    A807/A807M Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications

    A849 Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe

    A862/A862M Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe

    A926 Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe

    A930 Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits

    A964/A964M Standard Specification for Corrugated Steel Box Culverts

    A978/A978M Standard Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications

    A979/A979M Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field

    A998/A998M Standard Practice for Structural Design of Reinforcements for Fittings in Factory–Made Corrugated Steel Pipe for Sewers and Other Applications


    A05.12 - Wire Specifications

    A111 Standard Specification for Zinc-Coated (Galvanized) “Iron” Telephone and Telegraph Line Wire

    A116 Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric

    A121 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire

    A363 Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand

    A390 Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)

    A411 Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire

    A460 Standard Specification for Copper-Clad Steel Wire Strand

    A474 Standard Specification for Aluminum-Coated Steel Wire Strand

    A475 Standard Specification for Zinc-Coated Steel Wire Strand

    A586 Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand

    A603 Standard Specification for Zinc-Coated Steel Structural Wire Rope

    A640 Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable

    A641/A641M Standard Specification for Zinc–Coated (Galvanized) Carbon Steel Wire

    A740 Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)

    A741 Standard Specification for Metallic-Coated Steel Wire Rope and Fittings for Highway Guardrail

    A764 Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs

    A809 Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire

    A810 Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh

    A817 Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire

    A818 Standard Specification for Coppered Carbon Steel Wire

    A854/A854M Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire

    A855/A855M Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Wire Strand

    A856/A856M Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire

    A925 Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand

    A974 Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic Coated or Polyvinyl Chloride (PVC) Coated)

    A975 Standard Specification for Double–Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)


    A04.75 - Gaskets and Coupling for Plumbing and Sewer Piping

    A1045 Standard Specification for Flexible Poly (Vinyl Chloride) (PVC) Gaskets used in Connection of Vitreous China Plumbing Fixtures to Sanitary Drainage Systems

    A1056 Standard Specification for Cast Iron Couplings Used for Joining Hubless Cast Iron Soil Pipe and Fittings

    C1173 Standard Specification for Flexible Transition Couplings for Underground Piping Systems

    C1277 Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings

    C1440 Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems

    C1460 Standard Specification for Shielded Transition Couplings for Use With Dissimilar DWV Pipe and Fittings Above Ground

    C1461 Standard Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems for Above and Below Ground Use

    C1540 Standard Specification for Heavy Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings

    C1541 Standard Specification for Shielded Transition Couplings Using Flexible Poly Vinyl Chloride (PVC) Gaskets to Connect Dissimilar DWV Pipe and Fittings

    C1563 Standard Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sanitary Drain, Waste, Vent, and Storm Piping Applications

    C564 Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings


    A01.19 - Steel Sheet and Strip

    A1008/A1008M Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable

    A1011/A1011M Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength

    A1018/A1018M Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength

    A1031/A1031M Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled

    A1039/A1039M Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, Produced by Twin-Roll Casting Process

    A1083/A1083M Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, Produced by Twin-Roll Casting Process

    A1088 Standard Specification for Steel, Sheet, Cold-Rolled, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP)

    A109/A109M Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled

    A414/A414M Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels

    A424/A424M Standard Specification for Steel, Sheet, for Porcelain Enameling

    A505 Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

    A506 Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled

    A507 Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled

    A568/A568M Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

    A606/A606M Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance

    A635/A635M Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for

    A659/A659M Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled

    A684/A684M Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled

    A749/A749M Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for

    A794/A794M Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled

    A805/A805M Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled

    A980/A980M Standard Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled

    F1267 Standard Specification for Metal, Expanded, Steel


    A01.05 - Steel Reinforcement

    A1022/A1022M Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement

    A1032 Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard Drawn Used for Prestressing Concrete Pipe

    A1034/A1034M Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars

    A1035/A1035M Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement

    A1044/A1044M Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete

    A1055/A1055M Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars

    A1060/A1060M Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete

    A1061/A1061M Standard Test Methods for Testing Multi-Wire Steel Strand

    A1064/A1064M Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete

    A1078/A1078M Standard Specification for Epoxy-Coated Steel Dowels for Concrete Pavement

    A1081/A1081M Standard Test Method for Evaluating Bond of Seven-Wire Steel Prestressing Strand

    A1094/A1094M Standard Specification for Continuous Hot-Dip Galvanized Steel Bars for Concrete Reinforcement

    A184/A184M Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement

    A416/A416M Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete

    A421/A421M Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete

    A615/A615M Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement

    A648 Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Pipe

    A704/A704M Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement

    A706/A706M Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement

    A722/A722M Standard Specification for High-Strength Steel Bars for Prestressed Concrete

    A767/A767M Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement

    A775/A775M Standard Specification for Epoxy-Coated Steel Reinforcing Bars

    A779/A779M Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted for Prestressed Concrete

    A820/A820M Standard Specification for Steel Fibers for Fiber-Reinforced Concrete

    A821/A821M Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Tanks

    A881/A881M Standard Specification for Steel Wire, Indented, Low-Relaxation for Prestressed Concrete Railroad Ties

    A882/A882M Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand

    A884/A884M Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement

    A886/A886M Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete

    A910/A910M Standard Specification for Uncoated, Weldless, 2-Wire and 3-Wire Steel Strand for Prestressed Concrete

    A911/A911M Standard Specification for Uncoated, Stress-Relieved Steel Bars for Prestressed Concrete Ties

    A933/A933M Standard Specification for Vinyl-Coated Steel Wire and Welded Wire Reinforcement

    A934/A934M Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars

    A944 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens

    A951/A951M Standard Specification for Steel Wire for Masonry Joint Reinforcement

    A955/A955M Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement

    A970/A970M Standard Specification for Headed Steel Bars for Concrete Reinforcement

    A981/A981M Standard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Steel Prestressing Strand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors

    A996/A996M Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement


    A01.02 - Structural Steel for Bridges, Buildings, Rolling Stock and Ships

    A1043/A1043M Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings

    A1066/A1066M Standard Specification for High-Strength Low-Alloy Structural Steel Plate Produced by Thermo-Mechanical Controlled Process (TMCP)

    A1077/A1077M Standard Specification for Structural Steel with Improved Yield Strength at High Temperature for Use in Buildings

    A131/A131M Standard Specification for Structural Steel for Ships

    A242/A242M Standard Specification for High-Strength Low-Alloy Structural Steel

    A283/A283M Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates

    A328/A328M Standard Specification for Steel Sheet Piling

    A36/A36M Standard Specification for Carbon Structural Steel

    A514/A514M Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding

    A529/A529M Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality

    A572/A572M Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel

    A573/A573M Standard Specification for Structural Carbon Steel Plates of Improved Toughness

    A588/A588M Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance

    A6/A6M Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling

    A633/A633M Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates

    A656/A656M Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability

    A673/A673M Standard Specification for Sampling Procedure for Impact Testing of Structural Steel

    A690/A690M Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments

    A709/A709M Standard Specification for Structural Steel for Bridges

    A710/A710M Standard Specification for Precipitation–Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates

    A769/A769M Standard Specification for Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural Shapes

    A786/A786M Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates

    A827/A827M Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications

    A829/A829M Standard Specification for Alloy Structural Steel Plates

    A830/A830M Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements

    A857/A857M Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage

    A871/A871M Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance

    A898/A898M Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes

    A913/A913M Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST)

    A945/A945M Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness

    A950/A950M Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling

    A992/A992M Standard Specification for Structural Steel Shapes