Chemical by Committee

    F23.80 - Flame and Thermal

    F1002 Standard Performance Specification for Protective Clothing and Materials for Use by Workers Exposed to Specific Molten Substances and Related Thermal Hazards

    F1060 Standard Test Method for Thermal Protective Performance of Materials for Protective Clothing for Hot Surface Contact

    F1358 Standard Test Method for Effects of Flame Impingement on Materials Used in Protective Clothing Not Designated Primarily for Flame Resistance

    F1449 Standard Guide for Industrial Laundering of Flame, Thermal, and Arc Resistant Clothing

    F1930 Standard Test Method for Evaluation of Flame Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin

    F1939 Standard Test Method for Radiant Heat Resistance of Flame Resistant Clothing Materials with Continuous Heating

    F2302 Standard Performance Specification for Labeling Protective Clothing as Heat and Flame Resistant

    F2700 Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame Resistant Materials for Clothing with Continuous Heating

    F2701 Standard Test Method for Evaluating Heat Transfer through Materials for Protective Clothing Upon Contact with a Hot Liquid Splash

    F2702 Standard Test Method for Radiant Heat Performance of Flame Resistant Clothing Materials with Burn Injury Prediction

    F2703 Standard Test Method for Unsteady-State Heat Transfer Evaluation of Flame Resistant Materials for Clothing with Burn Injury Prediction

    F2731 Standard Test Method for Measuring the Transmitted and Stored Energy of Firefighter Protective Clothing Systems

    F2733 Standard Specification for Flame Resistant Rainwear for Protection Against Flame Hazards

    F2757 Standard Guide for Home Laundering Care and Maintenance of Flame, Thermal and Arc Resistant Clothing

    F2894 Standard Test Method for Evaluation of Materials, Protective Clothing and Equipment for Heat Resistance Using a Hot Air Circulating Oven

    F955 Standard Test Method for Evaluating Heat Transfer through Materials for Protective Clothing Upon Contact with Molten Substances


    F23.30 - Chemicals

    F1001 Standard Guide for Selection of Chemicals to Evaluate Protective Clothing Materials

    F1052 Standard Test Method for Pressure Testing Vapor Protective Suits

    F1154 Standard Practices for Qualitatively Evaluating the Comfort, Fit, Function, and Durability of Protective Ensembles and Ensemble Components

    F1186 Standard Classification System for Chemicals According to Functional Groups

    F1194 Standard Guide for Documenting the Results of Chemical Permeation Testing of Materials Used in Protective Clothing

    F1296 Standard Guide for Evaluating Chemical Protective Clothing

    F1301 Standard Practice for Labeling Chemical Protective Clothing

    F1359/F1359M Standard Test Method for Liquid Penetration Resistance of Protective Clothing or Protective Ensembles Under a Shower Spray While on a Mannequin

    F1383 Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Intermittent Contact

    F1407 Standard Test Method for Resistance of Chemical Protective Clothing Materials to Liquid Permeation—Permeation Cup Method

    F1461 Standard Practice for Chemical Protective Clothing Program

    F2053 Standard Guide for Documenting the Results of Airborne Particle Penetration Testing of Protective Clothing Materials

    F2061 Standard Practice for Chemical Protective Clothing: Wearing, Care, and Maintenance Instructions

    F2130 Standard Test Method for Measuring Repellency, Retention, and Penetration of Liquid Pesticide Formulation Through Protective Clothing Materials

    F2588 Standard Test Method for Man-In-Simulant Test (MIST) for Protective Ensembles

    F2669 Standard Performance Specification for Protective Clothing Worn by Operators Applying Pesticides

    F2704 Standard Specification for Air-Fed Protective Ensembles

    F2815 Standard Practice for Chemical Permeation through Protective Clothing Materials: Testing Data Analysis by Use of a Computer Program

    F2962 Standard Practice for Conformity Assessment of Protective Clothing Worn by Operators Applying Pesticides

    F739 Standard Test Method for Permeation of Liquids and Gases through Protective Clothing Materials under Conditions of Continuous Contact

    F903 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Liquids


    F20.13 - Treatment

    F1209 Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Ponds and Sloughs

    F1210 Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Lakes and Large Water Bodies

    F1231 Standard Guide for Ecological Considerations for the Use of Oil Spill Dispersants in Freshwater and Other Inland Environments, Rivers and Creeks

    F1279 Standard Guide for Ecological Considerations for the Restriction of the Use of Surface Washing Agents: Permeable Land Surfaces

    F1280 Standard Guide for Ecological Considerations for the Use of Surface Washing Agents: Impermeable Surfaces

    F1413 Standard Guide for Oil Spill Dispersant Application Equipment: Boom and Nozzle Systems

    F1460 Standard Practice for Calibrating Oil Spill Dispersant Application Equipment Boom and Nozzle Systems

    F1693 Standard Guide for Consideration of Bioremediation as an Oil Spill Response Method on Land

    F1737/F1737M Standard Guide for Use of Oil Spill Dispersant Application Equipment During Spill Response: Boom and Nozzle Systems

    F1738 Standard Test Method for Determination of Deposition of Aerially Applied Oil Spill Dispersants

    F1872 Standard Guide for Use of Chemical Shoreline Cleaning Agents: Environmental and Operational Considerations

    F2059 Standard Test Method for Laboratory Oil Spill Dispersant Effectiveness Using The Swirling Flask

    F2205 Standard Guide for Ecological Considerations for the Use of Chemical Dispersants in Oil Spill Response: Tropical Environments

    F2465/F2465M Standard Guide for Oil Spill Dispersant Application Equipment: Single-point Spray Systems

    F2532 Standard Guide for Determining Net Environmental Benefit of Dispersant Use


    F04.43 - Cells and Tissue Engineered Constructs for TEMPs

    F2149 Standard Test Method for Automated Analyses of Cells-the Electrical Sensing Zone Method of Enumerating and Sizing Single Cell Suspensions

    F2210 Standard Guide for Processing Cells, Tissues, and Organs for Use in Tissue Engineered Medical Products

    F2315 Standard Guide for Immobilization or Encapsulation of Living Cells or Tissue in Alginate Gels

    F2664 Standard Guide for Assessing the Attachment of Cells to Biomaterial Surfaces by Physical Methods

    F2739 Standard Guide for Quantitating Cell Viability Within Biomaterial Scaffolds

    F2944 Standard Test Method for Automated Colony Forming Unit (CFU) Assays—Image Acquisition and Analysis Method for Enumerating and Characterizing Cells and Colonies in Culture

    F2997 Standard Practice for Quantification of Calcium Deposits in Osteogenic Culture of Progenitor Cells Using Fluorescent Image Analysis

    F3088 Standard Test Method for Use of a Centrifugation Method to Quantify/Study Cell-Material Adhesive Interactions

    F3106 Standard Guide for in vitro Osteoblast Differentiation Assays


    F04.42 - Biomaterials and Biomolecules for TEMPs

    F2027 Standard Guide for Characterization and Testing of Raw or Starting Biomaterials for Tissue-Engineered Medical Products

    F2064 Standard Guide for Characterization and Testing of Alginates as Starting Materials Intended for Use in Biomedical and Tissue Engineered Medical Product Applications

    F2103 Standard Guide for Characterization and Testing of Chitosan Salts as Starting Materials Intended for Use in Biomedical and Tissue-Engineered Medical Product Applications

    F2131 Standard Test Method for In Vitro Biological Activity of Recombinant Human Bone Morphogenetic Protein-2 (rhBMP-2) Using the W-20 Mouse Stromal Cell Line

    F2150 Standard Guide for Characterization and Testing of Biomaterial Scaffolds Used in Tissue-Engineered Medical Products

    F2212 Standard Guide for Characterization of Type I Collagen as Starting Material for Surgical Implants and Substrates for Tissue Engineered Medical Products (TEMPs)

    F2259 Standard Test Method for Determining the Chemical Composition and Sequence in Alginate by Proton Nuclear Magnetic Resonance (1H NMR) Spectroscopy

    F2260 Standard Test Method for Determining Degree of Deacetylation in Chitosan Salts by Proton Nuclear Magnetic Resonance (1H NMR) Spectroscopy

    F2347 Standard Guide for Characterization and Testing of Hyaluronan as Starting Materials Intended for Use in Biomedical and Tissue Engineered Medical Product Applications

    F2450 Standard Guide for Assessing Microstructure of Polymeric Scaffolds for Use in Tissue Engineered Medical Products

    F2602 Standard Test Method for Determining the Molar Mass of Chitosan and Chitosan Salts by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS)

    F2603 Standard Guide for Interpreting Images of Polymeric Tissue Scaffolds

    F2605 Standard Test Method for Determining the Molar Mass of Sodium Alginate by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS)

    F2791 Standard Guide for Assessment of Surface Texture of Non-Porous Biomaterials in Two Dimensions

    F2883 Standard Guide for Characterization of Ceramic and Mineral Based Scaffolds used for Tissue-Engineered Medical Products (TEMPs) and as Device for Surgical Implant Applications

    F2900 Standard Guide for Characterization of Hydrogels used in Regenerative Medicine

    F2952 Standard Guide for Determining the Mean Darcy Permeability Coefficient for a Porous Tissue Scaffold

    F3089 Standard Guide for Characterization and Standardization of Polymerizable Collagen-Based Products and Associated Collagen-Cell Interactions


    F04.16 - Biocompatibility Test Methods

    E1262 Standard Guide for Performance of Chinese Hamster Ovary Cell/Hypoxanthine Guanine Phosphoribosyl Transferase Gene Mutation Assay

    F1027 Standard Practice for Assessment of Tissue and Cell Compatibility of Orofacial Prosthetic Materials and Devices

    F1408 Standard Practice for Subcutaneous Screening Test for Implant Materials

    F1439 Standard Guide for Performance of Lifetime Bioassay for the Tumorigenic Potential of Implant Materials

    F1877 Standard Practice for Characterization of Particles

    F1903 Standard Practice for Testing For Biological Responses to Particles In Vitro

    F1904 Standard Practice for Testing the Biological Responses to Particles in vivo

    F1983 Standard Practice for Assessment of Selected Tissue Effects of Absorbable Biomaterials for Implant Applications

    F1984 Standard Practice for Testing for Whole Complement Activation in Serum by Solid Materials

    F2065 Standard Practice for Testing for Alternative Pathway Complement Activation in Serum by Solid Materials

    F2147 Standard Practice for Guinea Pig: Split Adjuvant and Closed Patch Testing for Contact Allergens

    F2148 Standard Practice for Evaluation of Delayed Contact Hypersensitivity Using the Murine Local Lymph Node Assay (LLNA)

    F2382 Standard Test Method for Assessment of Intravascular Medical Device Materials on Partial Thromboplastin Time (PTT)

    F2567 Standard Practice for Testing for Classical Pathway Complement Activation in Serum by Solid Materials

    F2808 Standard Test Method for Performing Behind-the-Knee (BTK) Test for Evaluating Skin Irritation Response to Products and Materials That Come Into Repeated or Extended Contact with Skin

    F2888 Standard Test Method for Platelet Leukocyte Count—An In-Vitro Measure for Hemocompatibility Assessment of Cardiovascular Materials

    F2901 Standard Guide for Selecting Tests to Evaluate Potential Neurotoxicity of Medical Devices

    F619 Standard Practice for Extraction of Medical Plastics

    F719 Standard Practice for Testing Biomaterials in Rabbits for Primary Skin Irritation

    F720 Standard Practice for Testing Guinea Pigs for Contact Allergens: Guinea Pig Maximization Test

    F748 Standard Practice for Selecting Generic Biological Test Methods for Materials and Devices

    F749 Standard Practice for Evaluating Material Extracts by Intracutaneous Injection in the Rabbit

    F750 Standard Practice for Evaluating Material Extracts by Systemic Injection in the Mouse

    F756 Standard Practice for Assessment of Hemolytic Properties of Materials

    F763 Standard Practice for Short-Term Screening of Implant Materials

    F813 Standard Practice for Direct Contact Cell Culture Evaluation of Materials for Medical Devices

    F895 Standard Test Method for Agar Diffusion Cell Culture Screening for Cytotoxicity

    F981 Standard Practice for Assessment of Compatibility of Biomaterials for Surgical Implants with Respect to Effect of Materials on Muscle and Bone


    F04.11 - Polymeric Materials

    F1855 Standard Specification for Polyoxymethylene (Acetal) for Medical Applications

    F1925 Standard Specification for Semi-Crystalline Poly(lactide) Polymer and Copolymer Resins for Surgical Implants

    F2026 Standard Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications

    F2038 Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part I—Formulations and Uncured Materials

    F2042 Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II—Crosslinking and Fabrication

    F2313 Standard Specification for Poly(glycolide) and Poly(glycolide-co-lactide) Resins for Surgical Implants with Mole Fractions Greater Than or Equal to 70 % Glycolide

    F2565 Standard Guide for Extensively Irradiation-Crosslinked Ultra-High Molecular Weight Polyethylene Fabricated Forms for Surgical Implant Applications

    F2579 Standard Specification for Amorphous Poly(lactide) and Poly(lactide-co-glycolide) Resins for Surgical Implants

    F2695 Standard Specification for Ultra-High Molecular Weight Polyethylene Powder Blended With Alpha-Tocopherol (Vitamin E) and Fabricated Forms for Surgical Implant Applications

    F2759 Standard Guide for Assessment of the Ultra High Molecular Weight Polyethylene (UHMWPE) Used in Orthopedic and Spinal Devices

    F2820 Standard Specification for Polyetherketoneketone (PEKK) Polymers for Surgical Implant Applications

    F2848 Standard Specification for Medical-Grade Ultra-High Molecular Weight Polyethylene Yarns

    F2902 Standard Guide for Assessment of Absorbable Polymeric Implants

    F451 Standard Specification for Acrylic Bone Cement

    F602 Standard Criteria for Implantable Thermoset Epoxy Plastics

    F624 Standard Guide for Evaluation of Thermoplastic Polyurethane Solids and Solutions for Biomedical Applications

    F639 Standard Specification for Polyethylene Plastics for Medical Applications

    F641 Standard Specification for Implantable Epoxy Electronic Encapsulants

    F648 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants

    F665 Standard Classification for Vinyl Chloride Plastics Used in Biomedical Application

    F702 Standard Specification for Polysulfone Resin for Medical Applications

    F754 Standard Specification for Implantable Polytetrafluoroethylene (PTFE) Sheet, Tube, and Rod Shapes Fabricated from Granular Molding Powders

    F755 Standard Specification for Selection of Porous Polyethylene for Use in Surgical Implants

    F997 Standard Specification for Polycarbonate Resin for Medical Applications


    F02.15 - Chemical/Safety Properties

    F1308 Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products

    F1317 Standard Test Method for Calibration of Microwave Ovens

    F1349 Standard Test Method for Nonvolatile Ultraviolet (UV) Absorbing Extractables from Microwave Susceptors

    F1416 Standard Guide for Selection of Time-Temperature Indicators

    F1500 Standard Test Method for Quantitating Non-UV-Absorbing Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as Food Simulants

    F1519 Standard Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Used to Heat Food Products

    F1608 Standard Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method)

    F1884 Standard Test Method for Determining Residual Solvents in Packaging Materials

    F2013 Standard Test Method for Determination of Residual Acetaldehyde in Polyethylene Terephthalate Bottle Polymer Using an Automated Static Head-Space Sampling Device and a Capillary GC with a Flame Ionization Detector

    F2475 Standard Guide for Biocompatibility Evaluation of Medical Device Packaging Materials

    F2638 Standard Test Method for Using Aerosol Filtration for Measuring the Performance of Porous Packaging Materials as a Surrogate Microbial Barrier

    F34 Standard Practice for Construction of Test Cell for Liquid Extraction of Flexible Barrier Materials

    F874 Standard Test Method for Temperature Measurement and Profiling for Microwave Susceptors


    E55.04 - General Biopharmaceutical Standards

    E1564 Standard Guide for Design and Maintenance of Low-Temperature Storage Facilities for Maintaining Cryopreserved Biological Materials

    E1565 Standard Guide for Inventory Control and Handling of Biological Material Maintained at Low Temperatures

    E1566 Standard Guide for Handling Hazardous Biological Materials in Liquid Nitrogen

    E2097 Standard Guide for Determining the Impact of Extractables from Non-Metallic Materials on the Safety of Biotechnology Products

    E2888 Standard Practice for Process for Inactivation of Rodent Retrovirus by pH


    E54.03 - Decontamination

    E2542 Standard Specification for Portable Water Heaters Used at Personnel Decontamination Stations

    E2543 Standard Specification for Portable Air Heaters Used at Personnel Decontamination Stations and Shelters

    E2731 Standard Specification for Materials to Mitigate the Spread of Radioactive Contamination after a Radiological Dispersion Event

    E2739 Standard Specification for Personnel Decontamination System to be Used During a Chemical Event

    E2787 Standard Test Method for Determination of Thiodiglycol in Soil Using Pressurized Fluid Extraction Followed by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)

    E2838 Standard Test Method for Determination of Thiodiglycol on Wipes by Solvent Extraction Followed by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)

    E2866 Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Soil by Pressurized Fluid Extraction and Analyzed by Liquid


    E48.91 - Terminology

    E1705 Standard Terminology Relating to Biotechnology


    E48.05 - Biomass Conversion

    E1358 Standard Test Method for Determination of Moisture Content of Particulate Wood Fuels Using a Microwave Oven

    E1534 Standard Test Method for Determination of Ash Content of Particulate Wood Fuels

    E1690 Standard Test Method for Determination of Ethanol Extractives in Biomass

    E1721 Standard Test Method for Determination of Acid-Insoluble Residue in Biomass

    E1755 Standard Test Method for Ash in Biomass

    E1756 Standard Test Method for Determination of Total Solids in Biomass

    E1757 Standard Practice for Preparation of Biomass for Compositional Analysis

    E1758 Standard Test Method for Determination of Carbohydrates in Biomass by High Performance Liquid Chromatography

    E1821 Standard Test Method for Determination of Carbohydrates in Biomass by Gas Chromatography

    E870 Standard Test Methods for Analysis of Wood Fuels

    E871 Standard Test Method for Moisture Analysis of Particulate Wood Fuels

    E872 Standard Test Method for Volatile Matter in the Analysis of Particulate Wood Fuels

    E873 Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels


    E41.01 - Apparatus

    E1043 Standard Specification for Pipets, Milk and Cream Examination

    E1044 Standard Specification for Glass Serological Pipets (General Purpose and Kahn)

    E1045 Standard Specification for Pipet, Sahli Hemoglobin

    E1046 Standard Specification for Glass Westergren Tube, Disposable

    E1047 Standard Specification for Blood Sedimentation Tube, Wintrobe, Glass, Disposable

    E1048 Standard Specification for Color-Coding Pipets or Containers Coated With Anticoagulants

    E1092 Standard Specification for Glass Micro Folin Pipet, Disposable

    E1093 Standard Specification for Glass Prothrombin Pipet, Disposable

    E1094 Standard Specification for Pharmaceutical Glass Graduates

    E1095 Standard Specification for Common Laboratory Glass Funnels

    E1096 Standard Specification for Laboratory Glass Separatory Funnels

    E1133 Standard Practice for Performance Testing of Packaged Laboratory Apparatus for United States Government Procurements

    E1157 Standard Specification for Sampling and Testing of Reusable Laboratory Glassware

    E1189 Standard Specification for Micro-Burets (Koch Style)

    E123 Standard Specification for Apparatus for Determination of Water by Distillation

    E124 Standard Specification for Weighing and Drying Apparatus for Microchemical Analysis

    E1272 Standard Specification for Laboratory Glass Graduated Cylinders

    E1273 Standard Specification for Color Coding of Reusable Laboratory Pipets

    E128 Standard Test Method for Maximum Pore Diameter and Permeability of Rigid Porous Filters for Laboratory Use

    E1293 Standard Specification for Glass Measuring Pipets

    E133 Standard Specification for Distillation Equipment

    E1377 Standard Specification for Laboratory Glass Kjeldahl Flasks

    E1378 Standard Specification for Laboratory Glass Multiple Neck Distilling/Boiling Flasks

    E1379 Standard Specification for Laboratory Glass Dewar Flask

    E1380 Standard Specification for Color Coding of Laboratory Pipets with Multiple Graduations, 0.1 mL and Larger, But Excluding Disposable Prothrombin and Disposable Micropipets

    E1403 Standard Specification for Laboratory Glass Boiling Flasks

    E1404 Standard Specification for Laboratory Glass Conical Flasks

    E1405 Standard Specification for Laboratory Glass Distillation Flasks

    E1406 Standard Specification for Laboratory Glass Filter Flasks

    E144 Standard Practice for Safe Use of Oxygen Combustion Vessels

    E147 Standard Specification for Apparatus for Microdetermination of Nitrogen by Kjeldahl Method

    E1522 Standard Specification for Autoclavable Protective Coatings on Laboratory Glassware

    E1878 Standard Specification for Laboratory Glass Volumetric Flasks, Special Use

    E191 Standard Specification for Apparatus For Microdetermination of Carbon and Hydrogen in Organic and Organo-Metallic Compounds

    E193 Standard Specification for Laboratory Glass Micropipets

    E205 Standard Specification for Glass and Oxygen Combustion Flask

    E211 Standard Specification for Cover Glasses and Glass Slides for Use in Microscopy

    E236 Standard Specification for Apparatus for Microdetermination of Alkoxyl Groups

    E237 Standard Specification for Laboratory Glass Microvolumetric Vessels (Volumetric Flasks and Centrifuge Tubes)

    E287 Standard Specification for Laboratory Glass Graduated Burets

    E288 Standard Specification for Laboratory Glass Volumetric Flasks

    E438 Standard Specification for Glasses in Laboratory Apparatus

    E542 Standard Practice for Calibration of Laboratory Volumetric Apparatus

    E671 Standard Specification for Maximum Permissible Thermal Residual Stress in Annealed Glass Laboratory Apparatus

    E672 Standard Specification for Disposable Glass Micropipets

    E675 Standard Specification for Interchangeable Taper-Ground Stopcocks And Stoppers

    E676 Standard Specification for Interchangeable Taper-Ground Joints

    E677 Standard Specification for Interchangeable Spherical Ground Joints

    E694 Standard Specification for Laboratory Glass Volumetric Apparatus

    E714 Standard Specification for Disposable Glass Serological Pipets

    E732 Standard Specification for Disposable Pasteur-Type Pipet

    E734 Standard Specification for Disposable Glass Blood Sample Capillary Tube (Microhematocrit)

    E784 Standard Specification for Clamps, Utility, Laboratory, and Holders, Buret and Clamp

    E785 Standard Specification for Crucibles, Ignition, Laboratory, Metal

    E786 Standard Specification for Dishes, Evaporating, Platinum

    E787 Standard Specification for Disposable Glass Micro Blood Collection Pipets

    E788 Standard Specification for Pipet, Blood Diluting

    E832 Standard Specification for Laboratory Filter Papers

    E890 Standard Specification for Disposable Glass Culture Tubes

    E911 Standard Specification for Glass Stopcocks with Polytetrafluoroethylene (PTFE) Plugs

    E920 Standard Specification for Commercially Packaged Laboratory Apparatus

    E921 Standard Specification for Export Packaged Laboratory Apparatus

    E923 Standard Specification for Glass Westergren Tube, Reusable

    E934 Standard Specification for Serological Pipet, Disposable Plastic

    E960 Standard Specification for Laboratory Glass Beakers

    E961 Standard Specification for Blood Sedimentation Tube, Wintrobe, Glass, Reusable

    E969 Standard Specification for Glass Volumetric (Transfer) Pipets

    E982 Standard Specification for Laboratory Glass Test Tubes


    E37.10 - Fundamental, Statistical and Mechanical Properties

    E1363 Standard Test Method for Temperature Calibration of Thermomechanical Analyzers

    E1545 Standard Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis

    E1640 Standard Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis

    E1824 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension Method

    E1860 Standard Test Method for Elapsed Time Calibration of Thermal Analyzers

    E1867 Standard Test Method for Temperature Calibration of Dynamic Mechanical Analyzers

    E1877 Standard Practice for Calculating Thermal Endurance of Materials from Thermogravimetric Decomposition Data

    E1952 Standard Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry

    E1953 Standard Practice for Description of Thermal Analysis and Rheology Apparatus

    E1970 Standard Practice for Statistical Treatment of Thermoanalytical Data

    E2071 Standard Practice for Calculating Heat of Vaporization or Sublimation from Vapor Pressure Data

    E2092 Standard Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis

    E2113 Standard Test Method for Length Change Calibration of Thermomechanical Analyzers

    E2206 Standard Test Method for Force Calibration of Thermomechanical Analyzers

    E2253 Standard Test Method for Temperature and Enthalpy Measurement Validation of Differential Scanning Calorimeters

    E2254 Standard Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers

    E2347 Standard Test Method for Indentation Softening Temperature by Thermomechanical Analysis

    E2402 Standard Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers

    E2425 Standard Test Method for Loss Modulus Conformance of Dynamic Mechanical Analyzers

    E2551 Standard Test Method for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers

    E2744 Standard Test Method for Pressure Calibration of Thermal Analyzers

    E2769 Standard Test Method for Elastic Modulus by Thermomechanical Analysis Using Three-Point Bending and Controlled Rate of Loading

    E2918 Standard Test Method for Performance Validation of Thermomechanical Analyzers

    E831 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis


    E37.09 - Biological Calorimetry

    E2603 Standard Practice for Calibration of Fixed-Cell Differential Scanning Calorimeters


    E37.08 - Rheology

    E2509 Standard Test Method for Temperature Calibration of Rheometers in Isothermal Mode

    E2510 Standard Test Method for Torque Calibration or Conformance of Rheometers

    E2975 Standard Test Method for Calibration of Concentric Cylinder Rotational Viscometers


    E37.05 - Thermophysical Properties

    E1225 Standard Test Method for Thermal Conductivity of Solids Using the Guarded-Comparative-Longitudinal Heat Flow Technique

    E1461 Standard Test Method for Thermal Diffusivity by the Flash Method

    E1530 Standard Test Method for Evaluating the Resistance to Thermal Transmission of Materials by the Guarded Heat Flow Meter Technique

    E228 Standard Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer

    E2584 Standard Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter

    E2585 Standard Practice for Thermal Diffusivity by the Flash Method

    E289 Standard Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry


    E37.03 - Nomenclature and Definitions

    E1142 Standard Terminology Relating to Thermophysical Properties

    E2161 Standard Terminology Relating to Performance Validation in Thermal Analysis

    E473 Standard Terminology Relating to Thermal Analysis and Rheology


    E37.01 - Calorimetry and Mass Loss

    E1131 Standard Test Method for Compositional Analysis by Thermogravimetry

    E1269 Standard Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry

    E1356 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry

    E1582 Standard Practice for Calibration of Temperature Scale for Thermogravimetry

    E1641 Standard Test Method for Decomposition Kinetics by Thermogravimetry Using the Ozawa/Flynn/Wall Method

    E1719 Standard Test Method for Vapor Pressure of Liquids by Ebulliometry

    E1782 Standard Test Method for Determining Vapor Pressure by Thermal Analysis

    E1858 Standard Test Methods for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry

    E1868 Standard Test Methods for Loss-On-Drying by Thermogravimetry

    E2008 Standard Test Methods for Volatility Rate by Thermogravimetry

    E2009 Standard Test Methods for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry

    E2040 Standard Test Method for Mass Scale Calibration of Thermogravimetric Analyzers

    E2041 Standard Test Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method

    E2069 Standard Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters

    E2070 Standard Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods

    E2160 Standard Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry

    E2403 Standard Test Method for Sulfated Ash of Organic Materials by Thermogravimetry

    E2550 Standard Test Method for Thermal Stability by Thermogravimetry

    E2602 Standard Test Method for the Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry

    E2716 Standard Test Method for Determining Specific Heat Capacity by Sinusoidal Modulated Temperature Differential Scanning Calorimetry

    E2890 Standard Test Method for Kinetic Parameters for Thermally Unstable Materials by Differential Scanning Calorimetry Using the Kissinger Method

    E2958 Standard Test Methods for Kinetic Parameters by Factor Jump/Modulated Thermogravimetry

    E793 Standard Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry

    E794 Standard Test Method for Melting And Crystallization Temperatures By Thermal Analysis

    E928 Standard Test Method for Purity by Differential Scanning Calorimetry

    E967 Standard Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers

    E968 Standard Practice for Heat Flow Calibration of Differential Scanning Calorimeters


    E35.30 - Natural Multi-Cellular (Metazoan) Biological Control Organisms

    E2198 Specification for Phytoseiulus persimilis Athias-Henriot (Acarina:Phytoseiidae)

    E2199 Standard Specification for Encarsia formosa Gahan (Hymenoptera:Aphelinidae)

    E2360 Specification for Cryptolaemus montrouzieri Mulsant (Coleoptera: Coccinellidae)

    E2615 Standard Specification for Aphidoletes aphidimyza (Rondani) (Diptera: Cecidomyiidae)

    E2643 Standard Terminology Relating to Natural Multi-Cellular Biological Control Organisms

    E2644 Standard Specification for Podisus maculiventris (Say) (Hemiptera: Pentatomidae)

    E2645 Standard Specification for Feltiella acarisuga (Vallot) (Diptera: Cecidomyiidae)

    E2646 Standard Specification for Amblyseius cucumeris (=Neoseiulus) Oudemans (Acarina: Phytoseiidae)

    E2753 Standard Specification for Eretmocerus eremicus Rose and Zolnerowich (Hymenoptera: Aphelinidae)

    E2754 Standard Specification for Delphastus catalinae (Horn) (Coleoptera:Coccinellidae)


    E35.22 - Pesticide Formulations and Delivery Systems

    E1102 Standard Terminology Relating to Agricultural Chemical Application

    E1116 Standard Test Method for Emulsification Characteristics of Pesticide Emulsifiable Concentrates

    E1518 Standard Practice for Evaluation of Physical Compatibility of Pesticides in Aqueous Tank Mixtures by the Dynamic Shaker Method

    E1519 Standard Terminology Relating to Agricultural Tank Mix Adjuvants

    E1520 Standard Test Method for Particle Counts Per Pound of Granular Carriers and Dry-Applied Granular Formulations

    E1521 Standard Test Method for Liquid Holding Capacity of Granular Carriers

    E1673 Standard Test Method for Percent Suspensibility

    E1910/E1910M Test Method for Agricultural pH Control Agents

    E1945 Standard Test Method for Percent Dispersibility

    E2043 Standard Test Method for Nonvolatile Matter of Agricultural Adjuvant Solutions by Thermogravimetry

    E2044 Standard Test Method for Spreading of Liquid Agricultural Spray Mixtures

    E2316 Standard Test Method for Determination of Particles Resulting from the Attrition of Granular Pesticides

    E2407 Standard Test Method for Effectiveness of Defoaming Agents

    E2408 Standard Test Method for Relative Extensional Viscosity of Agricultural Spray Tank Mixes

    E2686 Standard Test Method for Volatile Organic Compound (VOC) Solvents Absorbed/Adsorbed By Simulated Soil Impacted by Pesticide Emulsifiable Concentrate (EC) Applications

    E2798 Standard Test Method for Characterization of Performance of Pesticide Spray Drift Reduction Adjuvants for Ground Application

    E2880 Standard Terminology Related to Biorationals

    E2945 Standard Test Method for Film Permeability Determination Using Static Permeability Cells

    E549 Standard Guide for Preparing Field Sprayer Calibration Procedures

    E550 Standard Guide for Preparing Granular Pesticide Ground Applicator Calibration Procedures

    E609 Standard Terminology Relating to Pesticides

    E641 Standard Methods for Testing Hydraulic Spray Nozzles Used in Agriculture

    E642 Standard Practice for Determining Application Rates and Distribution Patterns from Aerial Application Equipment

    E725 Standard Test Method for Sampling Granular Carriers and Granular Pesticides

    E726 Standard Test Method for Particle Size Distribution of Granular Carriers and Granular Pesticides

    E727/E727M Standard Test Methods for Determining Bulk Density of Granular Carriers and Granular Pesticides

    E728 Standard Test Method for Resistance to Attrition of Granular Carriers and Granular Pesticides


    E35.15 - Antimicrobial Agents

    E1052 Standard Test Method to Assess the Activity of Microbicides against Viruses in Suspension

    E1053 Standard Test Method to Assess Virucidal Activity of Chemicals Intended for Disinfection of Inanimate, Nonporous Environmental Surfaces

    E1054 Standard Test Methods for Evaluation of Inactivators of Antimicrobial Agents

    E1115 Standard Test Method for Evaluation of Surgical Hand Scrub Formulations

    E1153 Standard Test Method for Efficacy of Sanitizers Recommended for Inanimate, Hard, Nonporous Non-Food Contact Surfaces

    E1173 Standard Test Method for Evaluation of Preoperative, Precatheterization, or Preinjection Skin Preparations

    E1174 Standard Test Method for Evaluation of the Effectiveness of Health Care Personnel Handwash Formulations

    E1259 Standard Practice for Evaluation of Antimicrobials in Liquid Fuels Boiling Below 390°C

    E1326 Standard Guide for Evaluating Nonconventional Microbiological Tests Used for Enumerating Bacteria

    E1327 Standard Test Method for Evaluation of Antimicrobial Handwash Formulations by Utilizing Fingernail Regions

    E1428 Standard Test Method for Evaluating the Performance of Antimicrobials in or on Polymeric Solids Against Staining by Streptoverticillium reticulum (A Pink Stain Organism)

    E1482 Standard Practice for Use of Gel Filtration Columns for Cytotoxicity Reduction and Neutralization

    E1589 Standard Test Method for Evaluation of First Aid Antiseptic Drug Products

    E1766 Standard Test Method for Determination of Effectiveness of Sterilization Processes for Reusable Medical Devices

    E1837 Standard Test Method to Determine Efficacy of Disinfection Processes for Reusable Medical Devices (Simulated Use Test)

    E1838 Standard Test Method for Determining the Virus-Eliminating Effectiveness of Hygienic Handwash and Handrub Agents Using the Fingerpads of Adults

    E1839 Standard Test Method for Efficacy of Slimicides for the Paper Industry—Bacterial and Fungal Slime

    E1874 Standard Test Method for Recovery of Microorganisms From Skin using the Cup Scrub Technique

    E1882 Standard Test Method for Evaluation of Antimicrobial Formulations by the Agar Patch Technique

    E1883 Standard Test Method for Assessment of an Antibacterial Handwash Product by Multiple Basin Wash Technique

    E1891 Standard Guide for Determination of a Survival Curve for Antimicrobial Agents Against Selected Microorganisms and Calculation of a D-Value and Concentration Coefficient

    E2011 Standard Test Method for Evaluation of Hygienic Handwash and Handrub Formulations for Virus-Eliminating Activity Using the Entire Hand

    E2111 Standard Quantitative Carrier Test Method to Evaluate the Bactericidal, Fungicidal, Mycobactericidal, and Sporicidal Potencies of Liquid Chemicals

    E2149 Standard Test Method for Determining the Antimicrobial Activity of Antimicrobial Agents Under Dynamic Contact Conditions

    E2180 Standard Test Method for Determining the Activity of Incorporated Antimicrobial Agent(s) In Polymeric or Hydrophobic Materials

    E2196 Standard Test Method for Quantification of Pseudomonas aeruginosa Biofilm Grown with Medium Shear and Continuous Flow Using Rotating Disk Reactor

    E2197 Standard Quantitative Disk Carrier Test Method for Determining the Bactericidal, Virucidal, Fungicidal, Mycobactericidal and Sporicidal Activities of Liquid Chemical Germicides

    E2274 Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants

    E2275 Standard Practice for Evaluating Water-Miscible Metalworking Fluid Bioresistance and Antimicrobial Pesticide Performance

    E2276 Standard Test Method for Determining the Bacteria-Eliminating Effectiveness of Hygienic Handwash and Handrub Agents Using the Fingerpads of Adults

    E2314 Standard Test Method for Determination of Effectiveness of Cleaning Processes for Reusable Medical Instruments Using a Microbiologic Method (Simulated Use Test)

    E2315 Standard Guide for Assessment of Antimicrobial Activity Using a Time-Kill Procedure

    E2361 Standard Guide for Testing Leave-On Products Using In-Situ Methods

    E2362 Standard Practice for Evaluation of Pre-saturated or Impregnated Towelettes for Hard Surface Disinfection

    E2406 Standard Test Method for Evaluation of Laundry Sanitizers and Disinfectants for Use in High Efficiency Washing Operations

    E2471 Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity In Carpets

    E2562 Standard Test Method for Quantification of Pseudomonas aeruginosa Biofilm Grown with High Shear and Continuous Flow using CDC Biofilm Reactor

    E2613 Standard Test Method for Determining Fungus-Eliminating Effectiveness of Hygienic Handwash and Handrub Agents Using Fingerpads of Adults

    E2614 Standard Guide for Evaluation of Cleanroom Disinfectants

    E2647 Standard Test Method for Quantification of Pseudomonas aeruginosa Biofilm Grown Using Drip Flow Biofilm Reactor with Low Shear and Continuous Flow

    E2720 Standard Test Method for Evaluation of Effectiveness of Decontamination Procedures for Air-Permeable Materials when Challenged with Biological Aerosols Containing Human Pathogenic Viruses

    E2721 Standard Test Method for Evaluation of Effectiveness of Decontamination Procedures for Surfaces When Challenged with Droplets Containing Human Pathogenic Viruses

    E2722 Standard Test Method for Using Seeded-Agar for the Screening Assessment of Antimicrobial Activity in Fabric and Air Filter Media

    E2752 Standard Guide for Evaluation of Residual Effectiveness of Antibacterial Personal Cleansing Products

    E2755 Standard Test Method for Determining the Bacteria-Eliminating Effectiveness of Hand Sanitizer Formulations Using Hands of Adults

    E2756 Standard Terminology Relating to Antimicrobial and Antiviral Agents

    E2783 Standard Test Method for Assessment of Antimicrobial Activity for Water Miscible Compounds Using a Time-Kill Procedure

    E2784 Standard Test Method for Evaluation of the Effectiveness of Handwash Formulations Using the Paper Towel (Palmar) Method of Hand Contamination

    E2799 Standard Test Method for Testing Disinfectant Efficacy against Pseudomonas aeruginosa Biofilm using the MBEC Assay

    E2839 Standard Test Method for Production of Clostridium difficile Spores for Use in Efficacy Evaluation of Antimicrobial Agents

    E2870 Standard Test Method for Evaluating Relative Effectiveness of Antimicrobial Handwashing Formulations using the Palmar Surface and Mechanical Hand Sampling

    E2871 Standard Test Method for Evaluating Disinfectant Efficacy Against Pseudomonas aeruginosa Biofilm Grown in CDC Biofilm Reactor Using Single Tube Method

    E2894 Standard Test Method for Applying Aerosolized Bacillus Spores as Dry Inocula to Inanimate Surfaces

    E2895 Standard Test Method for Producing High Titers of Viable and Semi-Purified Spores of Clostridium difficile using a Liquid Medium

    E2896 Standard Test Method for Quantitative Petri Plate Method (QPM) for Determining the Effectiveness of Antimicrobial Towelettes

    E2897 Standard Guide for Evaluation of the Effectiveness of Hand Hygiene Topical Antimicrobial Products using ex vivo Porcine Skin

    E2946 Standard Test Method for Determining the Bacteria-Reducing Effectiveness of Food-Handler Handwash Formulations Using Hands of Adults

    E2966 Standard Test Method for Quantitative Assessment of Sanitizing Solutions for Carpet

    E640 Standard Test Method for Preservatives in Water-Containing Cosmetics

    E645 Standard Practice for Evaluation of Microbicides Used in Cooling Water Systems

    E723 Standard Practice for Evaluation of Antimicrobials as Preservatives for Aqueous-Based Products Used in the Paper Industry (Bacterial Spoilage)

    E875 Standard Test Method for Efficacy of Fungal Control Agents as Preservatives for Aqueous-Based Products Used in the Paper Industry

    E979 Standard Test Method for Evaluation of Antimicrobial Agents as Preservatives for Invert Emulsion and Other Water Containing Hydraulic Fluids


    E35.12 - Insect Control Agents

    E1517 Standard Test Method for Determining the Effectiveness of Liquid, Gel, Cream, or Shampoo Insecticides Against Human Louse Ova

    E652 Standard Test Method for Nonresidual Liquid Household Insecticides Against Flying Insects

    E653 Standard Test Method for Effectiveness of Aerosol and Pressurized Space Spray Insecticides Against Flying Insects

    E654 Standard Test Method for Effectiveness of Aerosol and Pressurized Spray Insecticides Against Cockroaches

    E938/E938M Standard Test Method for Effectiveness of Liquid, Gel, Cream, or Shampoo Insecticides Against Adult Human Lice

    E939 Standard Test Method of Field Testing Topical Applications of Compounds as Repellents for Medically Important and Pest Arthropods (Including Insects, Ticks, and Mites):I Mosquitoes


    E34.80 - Industrial Heath

    E1132 Standard Practice for Health Requirements Relating to Occupational Exposure to Respirable Crystalline Silica

    E2350 Standard Guide for Integration of Ergonomics/Human Factors into New Occupational Systems

    E2625 Standard Practice for Controlling Occupational Exposure to Respirable Crystalline Silica for Construction and Demolition Activities

    E2920 Standard Guide for Recording Occupational Injuries and Illnesses


    E34.50 - Health and Safety Standards for Metal Working Fluids

    E1302 Standard Guide for Acute Animal Toxicity Testing of Water-Miscible Metalworking Fluids

    E1497 Standard Practice for Safe Use of Water-Miscible Metal Removal Fluids

    E1687 Standard Test Method for Determining Carcinogenic Potential of Virgin Base Oils in Metalworking Fluids

    E1972 Standard Practice for Minimizing Effects of Aerosols in the Wet Metal Removal Environment

    E2144 Standard Practice for Personal Sampling and Analysis of Endotoxin in Metalworking Fluid Aerosols in Workplace Atmospheres

    E2148 Standard Guide for Using Documents Related to Metalworking or Metal Removal Fluid Health and Safety

    E2169 Standard Practice for Selecting Antimicrobial Pesticides for Use in Water-Miscible Metalworking Fluids

    E2523 Standard Terminology for Metalworking Fluids and Operations

    E2563 Standard Practice for Enumeration of Non-Tuberculosis Mycobacteria in Aqueous Metalworking Fluids by Plate Count Method

    E2564 Standard Practice for Enumeration of Mycobacteria in Metalworking Fluids by Direct Microscopic Counting (DMC) Method

    E2657 Standard Test Method for Determination of Endotoxin Concentrations in Water-Miscible Metalworking Fluids

    E2693 Standard Practice for Prevention of Dermatitis in the Wet Metal Removal Fluid Environment

    E2694 Standard Test Method for Measurement of Adenosine Triphosphate in Water-Miscible Metalworking Fluids

    E2889 Standard Practice for Control of Respiratory Hazards in the Metal Removal Fluid Environment


    E30.92 - Terminology

    E1732 Standard Terminology Relating to Forensic Science


    E30.90 - Executive

    E1658 Standard Terminology for Expressing Conclusions of Forensic Document Examiners

    E2195 Standard Terminology Relating to the Examination of Questioned Documents

    E2285 Standard Guide for Examination of Mechanical Checkwriter Impressions

    E2286 Standard Guide for Examination of Dry Seal Impressions

    E2287 Standard Guide for Examination of Fracture Patterns and Paper Fiber Impressions on Single-Strike Film Ribbons and Typed Text

    E2288 Standard Guide for Physical Match of Paper Cuts, Tears, and Perforations in Forensic Document Examinations

    E2289 Standard Guide for Examination of Rubber Stamp Impressions

    E2290 Standard Guide for Examination of Handwritten Items

    E2388 Standard Guide for Minimum Training Requirements for Forensic Document Examiners

    E2494 Standard Guide for Examination of Typewritten Items

    E2710 Standard Guide for Preservation of Charred Documents

    E2711 Standard Guide for Preservation of Liquid Soaked Documents

    E2765 Standard Practice for Use of Image Capture and Storage Technology in Forensic Document Examination

    E444 Standard Guide for Scope of Work of Forensic Document Examiners


    E30.12 - Digital and Multimedia Evidence

    E2678 Standard Guide for Education and Training in Computer Forensics

    E2763 Standard Practice for Computer Forensics

    E2825 Standard Guide for Forensic Digital Image Processing

    E2916 Standard Terminology for Digital and Multimedia Evidence Examination


    E30.11 - Interdisciplinary Forensic Science Standards

    E1020 Standard Practice for Reporting Incidents that May Involve Criminal or Civil Litigation

    E1188 Standard Practice for Collection and Preservation of Information and Physical Items by a Technical Investigator

    E1459 Standard Guide for Physical Evidence Labeling and Related Documentation

    E1492 Standard Practice for Receiving, Documenting, Storing, and Retrieving Evidence in a Forensic Science Laboratory

    E620 Standard Practice for Reporting Opinions of Scientific or Technical Experts

    E678 Standard Practice for Evaluation of Scientific or Technical Data

    E860 Standard Practice for Examining And Preparing Items That Are Or May Become Involved In Criminal or Civil Litigation


    E30.01 - Criminalistics

    E1386 Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Solvent Extraction

    E1388 Standard Practice for Sampling of Headspace Vapors from Fire Debris Samples

    E1412 Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration With Activated Charcoal

    E1413 Standard Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration

    E1588 Standard Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/ Energy Dispersive X-ray Spectrometry

    E1610 Standard Guide for Forensic Paint Analysis and Comparison

    E1618 Standard Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry

    E1843 Standard Guide for Sexual Assault Investigation, Examination, and Evidence Collection

    E1967 Standard Test Method for the Automated Determination of Refractive Index of Glass Samples Using the Oil Immersion Method and a Phase Contrast Microscope

    E1968 Standard Guide for Microcrystal Testing in the Forensic Analysis of Cocaine

    E1969 Standard Guide for Microcrystal Testing in the Forensic Analysis of Methamphetamine and Amphetamine

    E2057 Standard Specifications for Preparation of Laboratory Analysis Requests in Sexual Assault Investigations

    E2123 Standard Practice for the Transmittal of Evidence in Sexual Assault Investigation

    E2124 Standard Practice for Specification for Equipment and Supplies in Sexual Assault Investigations

    E2125 Standard Guide for Microcrystal Testing in the Forensic Analysis of Phencyclidine and Its Analogues

    E2154 Standard Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration with Solid Phase Microextraction (SPME)

    E2224 Standard Guide for Forensic Analysis of Fibers by Infrared Spectroscopy

    E2225 Standard Guide for Forensic Examination of Fabrics and Cordage

    E2227 Standard Guide for Forensic Examination of Non-Reactive Dyes in Textile Fibers by Thin-Layer Chromatography

    E2228 Standard Guide for Microscopic Examination of Textile Fibers

    E2326 Standard Practice for Education and Training of Seized-Drug Analysts

    E2327 Standard Practice for Quality Assurance of Laboratories Performing Seized-Drug Analysis

    E2329 Standard Practice for Identification of Seized Drugs

    E2330 Standard Test Method for Determination of Concentrations of Elements in Glass Samples Using Inductively Coupled Plasma Mass Spectrometry (ICP-MS) for Forensic Comparisons

    E2451 Standard Practice for Preserving Ignitable Liquids and Ignitable Liquid Residue Extracts from Fire Debris Samples

    E2548 Standard Guide for Sampling Seized Drugs for Qualitative and Quantitative Analysis

    E2549 Standard Practice for Validation of Seized-Drug Analytical Methods

    E2764 Standard Practice for Uncertainty Assessment in the Context of Seized-Drug Analysis

    E2808 Standard Guide for Microspectrophotometry and Color Measurement in Forensic Paint Analysis

    E2809 Standard Guide for Using Scanning Electron Microscopy/X-Ray Spectrometry in Forensic Paint Examinations

    E2881 Standard Test Method for Extraction and Derivatization of Vegetable Oils and Fats from Fire Debris and Liquid Samples with Analysis by Gas Chromatography-Mass Spectrometry

    E2882 Standard Guide for Analysis of Clandestine Drug Laboratory Evidence

    E2926 Standard Test Method for Forensic Comparison of Glass Using Micro X-ray Fluorescence (µ-XRF) Spectrometry

    E2927 Standard Test Method for Determination of Trace Elements in Soda-Lime Glass Samples Using Laser Ablation Inductively Coupled Plasma Mass Spectrometry for Forensic Comparisons

    E2937 Standard Guide for Using Infrared Spectroscopy in Forensic Paint Examinations


    E27.05 - Explosibility and Ignitability of Dust Clouds

    E1226 Standard Test Method for Explosibility of Dust Clouds

    E1491 Standard Test Method for Minimum Autoignition Temperature of Dust Clouds

    E1515 Standard Test Method for Minimum Explosible Concentration of Combustible Dusts

    E2019 Standard Test Method for Minimum Ignition Energy of a Dust Cloud in Air

    E2931 Standard Test Method for Limiting Oxygen (Oxidant) Concentration of Combustible Dust Clouds


    E27.04 - Flammability and Ignitability of Chemicals

    E1232 Standard Test Method for Temperature Limit of Flammability of Chemicals

    E2021 Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers

    E2079 Standard Test Methods for Limiting Oxygen (Oxidant) Concentration in Gases and Vapors

    E502 Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods

    E582 Standard Test Method for Minimum Ignition Energy and Quenching Distance in Gaseous Mixtures

    E659 Standard Test Method for Autoignition Temperature of Liquid Chemicals

    E681 Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)

    E918 Standard Practice for Determining Limits of Flammability of Chemicals at Elevated Temperature and Pressure


    E27.02 - Thermal Stability and Condensed Phases

    E1231 Standard Practice for Calculation of Hazard Potential Figures-of-Merit for Thermally Unstable Materials

    E1981 Standard Guide for Assessing Thermal Stability of Materials by Methods of Accelerating Rate Calorimetry

    E2012 Standard Guide for the Preparation of a Binary Chemical Compatibility Chart

    E2046 Standard Test Method for Reaction Induction Time by Thermal Analysis

    E2781 Standard Practice for Evaluation of Methods for Determination of Kinetic Parameters by Thermal Analysis

    E487 Standard Test Method for Constant-Temperature Stability of Chemical Materials

    E537 Standard Test Method for The Thermal Stability of Chemicals by Differential Scanning Calorimetry

    E680 Standard Test Method for Drop Weight Impact Sensitivity of Solid-Phase Hazardous Materials

    E698 Standard Test Method for Arrhenius Kinetic Constants for Thermally Unstable Materials Using Differential Scanning Calorimetry and the Flynn/Wall/Ozawa Method


    E21.08 - Thermal Protection

    E2683 Standard Test Method for Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages

    E2684 Standard Test Method for Measuring Heat Flux Using Surface-Mounted One-Dimensional Flat Gages

    E285 Standard Test Method for Oxyacetylene Ablation Testing of Thermal Insulation Materials

    E341 Standard Practice for Measuring Plasma Arc Gas Enthalpy by Energy Balance

    E377 Standard Practice for Internal Temperature Measurements in Low-Conductivity Materials

    E422 Standard Test Method for Measuring Heat Flux Using a Water-Cooled Calorimeter

    E457 Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter

    E458 Standard Test Method for Heat of Ablation

    E459 Standard Test Method for Measuring Heat Transfer Rate Using a Thin-Skin Calorimeter

    E471 Standard Test Method for Obtaining Char Density Profile of Ablative Materials by Machining and Weighing

    E511 Standard Test Method for Measuring Heat Flux Using a Copper-Constantan Circular Foil, Heat-Flux Transducer

    E598 Standard Test Method for Measuring Extreme Heat-Transfer Rates from High-Energy Environments Using a Transient, Null-Point Calorimeter

    E637 Standard Test Method for Calculation of Stagnation Enthalpy from Heat Transfer Theory and Experimental Measurements of Stagnation-Point Heat Transfer and Pressure


    E15.02 - Product Standards

    E1119 Standard Specification for Industrial Grade Ethylene Glycol

    E1120 Standard Specification for Liquid Chlorine

    E1146 Standard Specification for Muriatic Acid (Technical Grade Hydrochloric Acid)

    E1178 Standard Test Methods for Analysis of Acrylonitrile

    E1229 Standard Specification for Calcium Hypochlorite

    E1506 Standard Test Methods for Analysis of Acid-Grade Calcium Fluoride (Fluorspar)

    E1584 Standard Test Method for Assay of Nitric Acid

    E1616 Standard Test Method for Analysis of Acetic Anhydride Using Gas Chromatography

    E1746 Standard Test Method for Sampling and Analysis of Liquid Chlorine for Gaseous Impurities

    E1754 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry

    E1784 Standard Test Method for Total Peroxides in Acrylonitrile

    E1786 Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry

    E1788 Standard Test Method for Acidity in Acrylonitrile

    E1863 Standard Test Method for Analysis of Acrylonitrile by Gas Chromatography

    E2036 Standard Test Method for Nitrogen Trichloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC)

    E2037 Standard Test Method for Bromine Chloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC)

    E2193 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (Ultraviolet Spectrophotometric Method)

    E223 Standard Test Methods for Analysis of Sulfuric Acid

    E224 Standard Test Methods for Analysis of Hydrochloric Acid

    E2313 Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (Spectrophotometric Method)

    E2409 Standard Test Method for Glycol Impurities in Mono-, Di-, Tri- and Tetraethylene Glycol and in Mono- and Dipropylene Glycol(Gas Chromatographic Method)

    E2469 Standard Test Method for Chloride in Mono-, Di- and Tri-ethylene Glycol by Ion Chromatography

    E2470 Standard Specification for Polyester Grade Ethylene Glycol

    E2664 Standard Test Method for Methanol Wall Wash of Marine Vessels Handling Polyester Grade Monoethylene Glycol

    E2679 Standard Test Method for Acidity in Mono-, Di-, Tri- and Tetraethylene Glycol by Non-Aqueous Potentiometric Titration

    E2680 Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure)

    E346 Standard Test Methods for Analysis of Methanol

    E359 Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate)

    E410 Standard Test Method for Moisture and Residue in Liquid Chlorine

    E449 Standard Test Methods for Analysis of Calcium Chloride

    E475 Standard Test Method for Assay of Di-tert-Butyl Peroxide Using Gas Chromatography

    E506 Standard Test Method for Mercury in Liquid Chlorine

    E534 Standard Test Methods for Chemical Analysis of Sodium Chloride

    E611 Standard Test Methods for Low Concentrations of Diethlyene Glycol in Ethylene Glycol by Gas Chromatography

    E649 Standard Test Method for Bromine in Chlorine

    E755 Standard Test Method for Dicumyl Peroxide, Assay (Liquid Chromatography)

    E806 Standard Test Method for Carbon Tetrachloride and Chloroform in Liquid Chlorine by Direct Injection (Gas Chromatographic Procedure)


    E15.01 - General Standards

    D891 Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals

    E1064 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration

    E1090 Standard Test Method for Dicumyl Peroxide and Dicumyl Peroxide Decomposition Products in Resins

    E1228 Standard Test Method for Assay of Peroxy Esters-Catalyzed Iodometric Procedure

    E1456 Standard Specification for Caustic Potash; Solid (Potassium Hydroxide; Solid)

    E1547 Standard Terminology Relating to Industrial and Specialty Chemicals

    E1615 Standard Test Method for Iron in Trace Quantities Using the FerroZine Method

    E1787 Standard Test Method for Anions in Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide) by Ion Chromatography

    E1899 Standard Test Method for Hydroxyl Groups Using Reaction with p-Toluenesulfonyl Isocyanate (TSI) and Potentiometric Titration with Tetrabutylammonium Hydroxide

    E200 Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis

    E202 Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols

    E203 Standard Test Method for Water Using Volumetric Karl Fischer Titration

    E222 Standard Test Methods for Hydroxyl Groups Using Acetic Anhydride Acetylation

    E256 Standard Test Method for Chlorine in Organic Compounds by Sodium Peroxide Bomb Ignition

    E258 Standard Test Method for Total Nitrogen in Organic Materials by Modified Kjeldahl Method

    E291 Standard Test Methods for Chemical Analysis of Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide)

    E298 Standard Test Methods for Assay of Organic Peroxides

    E299 Standard Test Method for Trace Amounts of Peroxides In Organic Solvents

    E300 Standard Practice for Sampling Industrial Chemicals

    E394 Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method

    E411 Standard Test Method for Trace Quantities of Carbonyl Compounds with 2,4-Dinitrophenylhydrazine

    E538 Standard Test Method for Mercury in Caustic Soda (Sodium Hydroxide) and Caustic Potash (Potassium Hydroxide)

    E70 Standard Test Method for pH of Aqueous Solutions With the Glass Electrode


    E13.19 - Separation Science

    E1140 Standard Practice for Testing Nitrogen/Phosphorus Thermionic Ionization Detectors for Use In Gas Chromatography

    E1151 Standard Practice for Ion Chromatography Terms and Relationships

    E1303 Practice for Refractive Index Detectors Used in Liquid Chromatography

    E1449 Standard Guide for Supercritical Fluid Chromatography Terms and Relationships

    E1510 Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs

    E1511 Standard Practice for Testing Conductivity Detectors Used in Liquid and Ion Chromatography

    E1657 Standard Practice for Testing Variable-Wavelength Photometric Detectors Used in Liquid Chromatography

    E1698 Standard Practice for Testing Electrolytic Conductivity Detectors (ELCD) Used in Gas Chromatography

    E1747 Standard Guide for Purity of Carbon Dioxide Used in Supercritical Fluid Applications

    E260 Standard Practice for Packed Column Gas Chromatography

    E355 Standard Practice for Gas Chromatography Terms and Relationships

    E516 Standard Practice for Testing Thermal Conductivity Detectors Used in Gas Chromatography

    E594 Standard Practice for Testing Flame Ionization Detectors Used in Gas or Supercritical Fluid Chromatography

    E682 Standard Practice for Liquid Chromatography Terms and Relationships

    E685 Standard Practice for Testing Fixed-Wavelength Photometric Detectors Used in Liquid Chromatography

    E697 Standard Practice for Use of Electron-Capture Detectors in Gas Chromatography

    E840 Standard Practice for Using Flame Photometric Detectors in Gas Chromatography


    E13.03 - Infrared and Near Infrared Spectroscopy

    E1252 Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis

    E1421 Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers: Level Zero and Level One Tests

    E1642 Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis

    E1791 Standard Practice for Transfer Standards for Reflectance Factor for Near-Infrared Instruments Using Hemispherical Geometry

    E1865 Standard Guide for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air

    E1866 Standard Guide for Establishing Spectrophotometer Performance Tests

    E1944 Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests

    E1982 Standard Practice for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air

    E2105 Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR)

    E2106 Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses

    E2310 Standard Guide for Use of Spectral Searching by Curve Matching Algorithms with Data Recorded Using Mid-Infrared Spectroscopy

    E334 Standard Practice for General Techniques of Infrared Microanalysis

    E573 Standard Practices for Internal Reflection Spectroscopy

    E932 Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers


    E13.01 - Ultra-Violet, Visible, and Luminescence Spectroscopy

    E169 Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis

    E2719 Standard Guide for Fluorescence—Instrument Calibration and Qualification

    E275 Standard Practice for Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers

    E387 Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method

    E388 Standard Test Method for Wavelength Accuracy and Spectral Bandwidth of Fluorescence Spectrometers ,

    E578 Standard Test Method for Linearity of Fluorescence Measuring Systems

    E579 Standard Test Method for Limit of Detection of Fluorescence of Quinine Sulfate in Solution

    E925 Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Bandwidth does not Exceed 2 nm

    E958 Standard Practice for Estimation of the Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers


    E06.23 - Lead Hazards Associated with Buildings

    E1605 Standard Terminology Relating to Lead in Buildings

    E1613 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques

    E1644 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead

    E1645 Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis

    E1726 Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis

    E1728 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination

    E1753 Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films

    E1775 Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead

    E1792 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust

    E1795 Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings

    E1796 Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings

    E1797 Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings

    E1908 Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)

    E1979 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead

    E2120 Standard Practice for Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films

    E2239 Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities

    E2252 Standard Practice for Selection of Lead Hazard Reduction Methods for Identified Risks in Residential Housing or Child Occupied Facilities

    E2255/E2255M Standard Practice for Conducting Visual Assessments for Lead Hazards in Buildings

    E2271 Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Dwellings, and in Other Child-Occupied Facilities

    E2913 Standard Practice for Hotplate Digestion of Lead from Composited Wipe Samples

    E2914 Standard Practice for Ultrasonic Extraction of Lead from Composited Wipe Samples


    E01.22 - Laboratory Quality

    E1329 Standard Practice for Verification and Use of Control Charts in Spectrochemical Analysis

    E1601 Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method

    E1914 Standard Practice for Use of Terms Relating to the Development and Evaluation of Methods for Chemical Analysis

    E1950 Standard Practice for Reporting Results from Methods of Chemical Analysis

    E2027 Standard Practice for Conducting Proficiency Tests in the Chemical Analysis of Metals, Ores, and Related Materials

    E2093 Standard Guide for Optimizing, Controlling and Assessing Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization

    E2857 Standard Guide for Validating Analytical Methods

    E2972 Standard Guide for Production, Testing, and Value Assignment of In-House Reference Materials for Metals, Ores, and Other Related Materials

    E826 Standard Practice for Testing Homogeneity of a Metal Lot or Batch in Solid Form by Spark Atomic Emission Spectrometry

    E882 Standard Guide for Accountability and Quality Control in the Chemical Analysis Laboratory


    E01.20 - Fundamental Practices

    E1097 Standard Guide for Determination of Various Elements by Direct Current Plasma Atomic Emission Spectrometry

    E1172 Standard Practice for Describing and Specifying a Wavelength-Dispersive X-Ray Spectrometer

    E1184 Standard Practice for Determination of Elements by Graphite Furnace Atomic Absorption Spectrometry

    E1257 Standard Guide for Evaluating Grinding Materials Used for Surface Preparation in Spectrochemical Analysis

    E1282 Standard Guide for Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis Methods for Metals, Ores, and Related Materials

    E1306 Standard Practice for Preparation of Metal and Alloy Samples by Electric Arc Remelting for the Determination of Chemical Composition

    E1361 Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis

    E1479 Standard Practice for Describing and Specifying Inductively-Coupled Plasma Atomic Emission Spectrometers

    E1621 Standard Guide for Elemental Analysis by Wavelength Dispersive X-Ray Fluorescence Spectrometry

    E1770 Standard Practice for Optimization of Electrothermal Atomic Absorption Spectrometric Equipment

    E1832 Standard Practice for Describing and Specifying a Direct Current Plasma Atomic Emission Spectrometer

    E1916 Standard Guide for Identification of Mixed Lots of Metals

    E305 Standard Practice for Establishing and Controlling Atomic Emission Spectrochemical Analytical Curves

    E406 Standard Practice for Using Controlled Atmospheres in Spectrochemical Analysis

    E50 Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials

    E520 Standard Practice for Describing Photomultiplier Detectors in Emission and Absorption Spectrometry

    E60 Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry


    E01.08 - Ni and Co and High Temperature Alloys

    E1473 Standard Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys

    E1587 Standard Test Methods for Chemical Analysis of Refined Nickel

    E1834 Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry

    E1835 Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry

    E1917 Standard Test Method for Determination of Phosphorus in Nickel, Ferronickel, and Nickel Alloys by Phosphovanadomolybdate Spectrophotometry

    E1938 Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Spectrophotometry

    E2465 Standard Test Method for Analysis of Ni-Base Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry

    E2594 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Method)

    E2823 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-Based Method)


    E01.06 - Ti, Zr, W, Mo, Ta, Nb, Hf, Re

    E1409 Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion

    E1447 Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by the Inert Gas Fusion Thermal Conductivity/Infrared Detection Method

    E1552 Standard Test Method for Determining Hafnium in Zirconium and Zirconium Alloys By Direct Current Plasma—Atomic Emission Spectrometry

    E1569 Standard Test Method for Determination of Oxygen in Tantalum Powder by Inert Gas Fusion Technique

    E1941 Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis

    E2371 Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)

    E2626 Standard Guide for Spectrometric Analysis of Reactive and Refractory Metals

    E539 Standard Test Method for Analysis of Titanium Alloys by X-Ray Fluorescence Spectrometry


    E01.05 - Cu, Pb, Zn, Cd, Sn, Be, Precious Metals, their Alloys, and Related Metals

    E1277 Standard Test Method for Analysis of Zinc-5 % Aluminum-Mischmetal Alloys by ICP Emission Spectrometry

    E1335 Standard Test Methods for Determination of Gold in Bullion by Fire Assay Cupellation Analysis

    E1446 Standard Test Method for Chemical Analysis of Refined Gold by Direct Current Plasma Atomic Emission Spectrometry

    E1659 Standard Test Methods for Coating Mass and Chemical Analysis of Zinc-Nickel Alloy Electrolytically Coated on Steel Sheet

    E1771 Standard Test Method for Determination of Copper in Anode and Blister Copper

    E1833 Standard Practice for Sampling of Blister Copper in Cast Form for Determination of Chemical Composition

    E255 Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition

    E2575 Standard Test Method for Determination of Oxygen in Copper and Copper Alloys

    E2824 Standard Test Method for Determination of Beryllium in Copper-Beryllium Alloys by Phosphate Gravimetric Method

    E37 Standard Test Methods for Chemical Analysis of Pig Lead

    E396 Standard Test Methods for Chemical Analysis of Cadmium

    E439 Standard Test Methods for Chemical Analysis of Beryllium

    E478 Standard Test Methods for Chemical Analysis of Copper Alloys

    E53 Standard Test Method for Determination of Copper in Unalloyed Copper by Gravimetry

    E536 Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys

    E55 Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition

    E581 Standard Test Methods for Chemical Analysis of Manganese-Copper Alloys

    E634 Standard Practice for Sampling of Zinc and Zinc Alloys by Spark Atomic Emission Spectrometry

    E88 Standard Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition


    E01.02 - Ores, Concentrates, and Related Metallurgical Materials

    E1070 Standard Test Method for Determination of Phosphorus in Iron Ores by Phospho-Molybdenum-Blue Spectrophotometry

    E1568 Standard Test Method for Determination of Gold in Activated Carbon by Fire Assay Gravimetry

    E1600 Standard Test Methods for Determination of Gold in Cyanide Solutions

    E1805 Standard Test Method for Determination of Gold in Copper Concentrates by Fire Assay Gravimetry

    E1898 Standard Test Method for Determination of Silver in Copper Concentrates by Flame Atomic Absorption Spectrometry

    E1915 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics

    E2050 Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion

    E2242 Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure

    E2293 Standard Practice for Drying of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials for the Determination of Mercury

    E2294 Standard Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates, and Related Materials by Fire Assay Gravimetry

    E2295 Standard Practice for Fire Assay Silver Corrections in Analysis of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Silver Determination in Slags and Cupels

    E2296 Standard Practice for Silver Corrections in Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Fire Assay Slag Recycling and Cupel Proof Gravimetry

    E246 Standard Test Methods for Determination of Iron in Iron Ores and Related Materials by Dichromate Titrimetry

    E247 Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry

    E248 Standard Test Method for Determination of Manganese in Manganese Ores by Pyrophosphate Complexed Permanganate Potentiometric Titrimetry

    E276 Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Finer for Metal-Bearing Ores and Related Materials

    E278 Standard Test Method for Determination of Phosphorus in Iron Ores by Phosphomolybdate Coprecipitation and Nitric Acid Titrimetry

    E279 Standard Test Method for Determination of Abrasion Resistance of Iron Ore Pellets and Sinter by the Tumbler Test

    E2941 Standard Practices for Extraction of Elements from Ores and Related Metallurgical Materials by Acid Digestion

    E314 Standard Test Methods for Determination of Manganese in Iron Ores by Pyrophosphate (Potentiometric) and Periodate (Photometric) Techniques

    E316 Standard Test Method for Determination of Iron in Manganese Ores by Hydrogen Sulfide Reduction-Dichromate Titrimetry

    E342 Standard Test Method for Determination of Chromium Oxide in Chrome Ores by Permanganate Titrimetry

    E382 Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets

    E389 Standard Test Method for Particle Size or Screen Analysis at No. 4 (4.75-mm) Sieve and Coarser for Metal-Bearing Ores and Related Materials

    E463 Standard Test Method for Determination of Silica in Fluorspar by Silico-Molybdate Visible Spectrophotometry

    E465 Standard Test Methods for Determination of Manganese (IV) in Manganese Ores by Redox Titrimetry

    E507 Standard Test Method for Determination of Aluminum in Iron Ores by Flame Atomic Absorption Spectrometry

    E508 Standard Test Method for Determination of Calcium and Magnesium in Iron Ores by Flame Atomic Absorption Spectrometry

    E738 Standard Test Method for Determination of Aluminum in Iron Ores and Related Materials by EDTA Complexometric Titrimetry

    E815 Standard Test Method for Determination of Calcium Fluoride in Fluorspar by Complexometric Titrimetry

    E841 Standard Test Method for Determination of Copper in Iron Ores and Related Materials by Flame Atomic Absorption Spectrometry

    E877 Standard Practice for Sampling and Sample Preparation of Iron Ores and Related Materials for Determination of Chemical Composition and Physical Properties

    E878 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrophotometry

    E945 Standard Test Method for Determination of Zinc in Zinc Ores and Concentrates by EDTA Complexometric Titrimetry


    E01.01 - Iron, Steel, and Ferroalloys

    E1010 Standard Practice for Preparation of Disk Specimens of Steel and Iron for Spectrochemical Analysis by Remelting

    E1019 Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Fusion Techniques

    E1085 Standard Test Method for Analysis of Low-Alloy Steels by X-Ray Fluorescence Spectrometry

    E1086 Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry

    E1806 Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition

    E1852 Standard Test Method for Determination of Low Levels of Antimony in Carbon and Low-Alloy Steel by Graphite Furnace Atomic Absorption Spectrometry

    E1999 Standard Test Method for Analysis of Cast Iron by Spark Atomic Emission Spectrometry

    E2209 Standard Test Method for Analysis of High Manganese Steel by Spark Atomic Emission Spectrometry

    E322 Standard Test Method for Analysis of Low-Alloy Steels and Cast Irons by Wavelength Dispersive X-Ray Fluorescence Spectrometry

    E350 Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron

    E351 Standard Test Methods for Chemical Analysis of Cast Iron—All Types

    E352 Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels

    E353 Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys

    E354 Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys

    E363 Standard Test Methods for Chemical Analysis of Chromium and Ferrochromium

    E367 Standard Test Methods for Chemical Analysis of Ferroniobium

    E372 Standard Test Method for Determination of Calcium and Magnesium in Magnesium Ferrosilicon by EDTA Titration

    E415 Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry

    E572 Standard Test Method for Analysis of Stainless and Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry


    D35.02 - Endurance Properties

    D1987 Standard Test Method for Biological Clogging of Geotextile or Soil/Geotextile Filters

    D4355/D4355M Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc Type Apparatus

    D4594 Standard Test Method for Effects of Temperature on Stability of Geotextiles

    D4873 Standard Guide for Identification, Storage, and Handling of Geosynthetic Rolls and Samples

    D4886 Standard Test Method for Abrasion Resistance of Geotextiles (Sand Paper/Sliding Block Method)

    D5262 Standard Test Method for Evaluating the Unconfined Tension Creep and Creep Rupture Behavior of Geosynthetics

    D5322 Standard Practice for Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids

    D5397 Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test

    D5496 Standard Practice for In Field Immersion Testing of Geosynthetics

    D5596 Standard Test Method for Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics

    D5721 Standard Practice for Air-Oven Aging of Polyolefin Geomembranes

    D5747/D5747M Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids

    D5819 Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability

    D5885 Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry

    D5970 Standard Test Method for Deterioration of Geotextiles from Outdoor Exposure

    D6213 Standard Practice for Tests to Evaluate the Chemical Resistance of Geogrids to Liquids

    D6388 Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids

    D6389 Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids

    D6992 Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method

    D7238 Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus

    D7361 Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method

    D7406 Standard Test Method for Time-Dependent (Creep) Deformation Under Constant Pressure for Geosynthetic Drainage Products

    D7409 Standard Test Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns


    D32.03 - Chemical Composition

    D1977 Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis

    D3610 Standard Test Method for Total Cobalt In Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration Method

    D3943 Standard Test Method for Total Molybdenum in Fresh Alumina-Base Catalysts

    D4481 Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts

    D4642 Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry

    D4782 Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry

    D5153 Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption

    D7085 Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF)

    D7442 Standard Practice for Sample Preparation of Fluid Catalytic Cracking Catalysts and Zeolites for Elemental Analysis by Inductively Coupled Plasma Atomic Emission Spectroscopy


    D32.02 - Physical-Mechanical Properties

    C515 Standard Specification for Chemical-Resistant Ceramic Tower Packings

    D4058 Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers

    D4164 Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers

    D4179 Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers

    D4180 Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers

    D4438 Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting

    D4464 Standard Test Method for Particle Size Distribution of Catalytic Materials by Laser Light Scattering

    D4512 Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder

    D4513 Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving

    D4699 Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles

    D4781 Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles

    D5757 Standard Test Method for Determination of Attrition and Abrasion of Powdered Catalysts by Air Jets

    D6175 Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles

    D6761 Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers

    D7084 Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers


    D32.01 - Physical-Chemical Properties

    D3663 Standard Test Method for Surface Area of Catalysts and Catalyst Carriers

    D3908 Standard Test Method for Hydrogen Chemisorption on Supported Platinum Catalysts by Volumetric Vacuum Method

    D4222 Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements

    D4284 Standard Test Method for Determining Pore Volume Distribution of Catalysts and Catalyst Carriers by Mercury Intrusion Porosimetry

    D4365 Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst

    D4567 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method

    D4641 Standard Practice for Calculation of Pore Size Distributions of Catalysts and Catalyst Carriers from Nitrogen Desorption Isotherms

    D4780 Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption

    D4824 Standard Test Method for Determination of Catalyst Acidity by Ammonia Chemisorption

    D4926 Standard Test Method for Gamma Alumina Content in Catalysts Containing Silica and Alumina by X-ray Powder Diffraction


    D31.08 - Fats and Oils

    D5346 Standard Test Method for Determination of the Pour Point of Petroleum Oil Used in Fatliquors and Softening Compounds

    D5347 Standard Test Method for Determination of the Ash Content of Fats and Oils

    D5348 Standard Test Method for Determination of the Moisture Content of Sulfonated and Sulfated Oils by Distillation with Xylene

    D5349 Standard Test Method for Determination of the Moisture and Volatile Content of Sulfonated and Sulfated Oils by Hot-Plate Method

    D5350 Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Titration, Test Method A

    D5351 Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Extraction Titration, Test Method B

    D5352 Standard Test Method for Determination of Organically Combined Sulfuric Anhydride Ash-Gravimetric, Test Method C

    D5353 Standard Test Method for Determination of Total Desulfated Fatty Matter

    D5354 Standard Test Method for Determination of Total Active Ingredients in Sulfonated and Sulfated Oils

    D5355 Standard Test Method for Specific Gravity of Oils and Liquid Fats

    D5439 Standard Test Method for Determination of Sediment in Moellon

    D5440 Standard Test Method for Determining the Melting Point of Fats and Oils

    D5551 Standard Test Method for Determination of the Cloud Point of Oil

    D5553 Standard Test Method for Determination of the Unsaponifiable Nonvolatile Matter in Sulfated Oils

    D5554 Standard Test Method for Determination of the Iodine Value of Fats and Oils

    D5555 Standard Test Method for Determination of Free Fatty Acids Contained in Animal, Marine, and Vegetable Fats and Oils Used in Fat Liquors and Stuffing Compounds

    D5556 Standard Test Method for Determination of the Moisture and Other Volatile Matter Contained in Fats and Oils Used in Fat Liquors and Softening Compounds

    D5557 Standard Test Method for Determination of Insoluble Impurities Contained in Fats and Oils Used in Fat Liquors and Stuffing Compounds

    D5558 Standard Test Method for Determination of the Saponification Value of Fats and Oils

    D5559 Standard Test Method for Determination of Acidity as Free Fatty Acids/Acid Number in the Absence of Ammonium or Triethanolamine Soaps in Sulfonated and Sulfated Oils

    D5560 Standard Test Method for Determination of Neutral Fatty Matter Contained in Fats and Oils

    D5562 Standard Test Method for Determination of the Acidity as Free Fatty Acids/Acid Number in the Presence of Ammonium or Triethanolamine Soaps

    D5564 Standard Test Method for Determination of the Total Ammonia Contained in Sulfonated or Sulfated Oils

    D5565 Standard Test Method for Determination of the Solidification Point of Fatty Acids Contained in Animal, Marine, and Vegetable Fats and Oils

    D5566 Standard Test Method for Determination of Inorganic Salt Content of Sulfated and Sulfonated Oils


    D31.06 - Chemical Analysis

    D2617 Standard Test Method for Total Ash in Leather

    D2807 Standard Test Method for Chromic Oxide in Leather (Perchloric Acid Oxidation)

    D2810 Standard Test Method for pH of Leather

    D2868 Standard Test Method for Nitrogen Content (Kjeldahl) and Hide Substance Content of Leather

    D3495 Standard Test Method for Hexane Extraction of Leather

    D3790 Standard Test Method for Volatile Matter (Moisture) of Leather by Oven Drying

    D3897 Standard Practice for Calculation of Basicity of Chrome Tanning Liquors

    D3898 Standard Test Method for Chromic Oxide in Basic Chromium Tanning Liquors

    D3913 Standard Test Method for Acidity in Basic Chromium Tanning Liquors

    D4653 Standard Test Method for Total Chlorides in Leather

    D4654 Standard Test Method for Sulfate Basicity in Leather

    D4655 Standard Test Methods for Sulfates in Leather (Total, Neutral, and Combined Acid)

    D4906 Standard Test Method for Total Solids and Ash Content in Leather Finishing Materials

    D4907 Standard Test Method for Nitrocellulose in Finish on Leather

    D5356 Standard Test Method for PH of Chrome Tanning Solutions

    D6016 Standard Test Method for Determination of Nitrogen, Water Extractable in Leather

    D6017 Standard Test Method for Determination of Magnesium Sulfate (Epsom Salt) in Leather

    D6018 Standard Test Method for Determining the Presence of Lead Salts in Leather

    D6019 Test Method for Determination of Chromic Oxide in Basic Chromium Tanning Liquors (Ammonium Persulfate Oxidation)


    D31.01 - Vegetable Leather

    D1611 Standard Test Method for Corrosion Produced by Leather in Contact with Metal

    D2213 Standard Test Method for Compressibility of Leather

    D2875 Standard Test Method for Insoluble Ash of Vegetable-Tanned Leather

    D2876 Standard Test Method for Water-Soluble Matter of Vegetable-Tanned Leather

    D4786 Standard Test Method for Stitch Tear Strength, Single Hole

    D4831 Standard Test Method for Buckle Tear Strength of Leather

    D4899 Standard Practice for Analysis of Vegetable Tanning Materials-General

    D4900 Standard Test Method for Lignosulfonates (Sulfite Cellulose) in Tanning Extracts

    D4901 Standard Practice for Preparation of Solution of Liquid Vegetable Tannin Extracts

    D4902 Standard Test Method for Evaporation and Drying of Analytical Solutions

    D4903 Standard Test Method for Total Solids and Water in Vegetable Tanning Material Extracts

    D4904 Standard Practice for Preparation of Solution of Liquid Vegetable Tannin Extracts

    D4905 Standard Practice for Preparation of Solution of Solid, Pasty and Powdered Vegetable Tannin Extracts

    D6020 Standard Practice for Calculation of (Non-Mineral) Combined Tanning Agents and Degree of Tannage

    D6075 Standard Test Method for Cracking Resistance of Leather

    D6401 Standard Test Method for Determining Non-Tannins and Tannin in Extracts of Vegetable Tanning Materials

    D6402 Standard Test Method for Determining Soluble Solids and Insolubles in Extracts of Vegetable Tanning Materials

    D6403 Standard Test Method for Determining Moisture in Raw and Spent Materials

    D6404 Standard Practice for Sampling Vegetable Materials Containing Tannin

    D6405 Standard Practice for Extraction of Tannins from Raw and Spent Materials

    D6406 Standard Test Method for Analysis of Sugar in Vegetable Tanning Materials

    D6407 Standard Test Method for Analysis of Iron and Copper in Vegetable Tanning Materials

    D6408 Standard Test Method for Analysis of Tannery Liquors

    D6409 Standard Practice for Color Tests with Sheepskin Skiver

    D6410 Standard Test Method for Determining Acidity of Vegetable Tanning Liquors


    D30.03 - Constituent/Precursor Properties

    C613 Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction

    D3529M Standard Test Method for Matrix Solids Content and Matrix Content of Composite Prepreg

    D3530 Standard Test Method for Volatiles Content of Composite Material Prepreg

    D3531/D3531M Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg

    D3532/D3532M Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg

    D3800M Standard Test Method for Density of High-Modulus Fibers

    D4018 Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows

    D4102 Standard Test Method for Thermal Oxidative Resistance of Carbon Fibers

    D7750 Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer


    D28.04 - Gas Phase Evaluation Tests

    D2854 Standard Test Method for Apparent Density of Activated Carbon

    D2862 Standard Test Method for Particle Size Distribution of Granular Activated Carbon

    D2866 Standard Test Method for Total Ash Content of Activated Carbon

    D2867 Standard Test Methods for Moisture in Activated Carbon

    D3466 Standard Test Method for Ignition Temperature of Granular Activated Carbon

    D3467 Standard Test Method for Carbon Tetrachloride Activity of Activated Carbon

    D3802 Standard Test Method for Ball-Pan Hardness of Activated Carbon

    D3803 Standard Test Method for Nuclear-Grade Activated Carbon

    D4069 Standard Specification for Impregnated Activated Carbon Used to Remove Gaseous Radio-Iodines from Gas Streams

    D5159 Standard Guide for Dusting Attrition of Granular Activated Carbon

    D5160 Standard Guide for Gas-Phase Adsorption Testing of Activated Carbon

    D5228 Standard Test Method for Determination of Butane Working Capacity of Activated Carbon

    D5742 Standard Test Method for Determination of Butane Activity of Activated Carbon

    D5832 Standard Test Method for Volatile Matter Content of Activated Carbon Samples

    D6646 Standard Test Method for Determination of the Accelerated Hydrogen Sulfide Breakthrough Capacity of Granular and Pelletized Activated Carbon

    D7385 Standard Guide for Estimating Carbon Saturation by Temperature Rise upon Immersion


    D28.02 - Liquid Phase Evaluation

    D3838 Standard Test Method for pH of Activated Carbon

    D3860 Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique

    D4607 Standard Test Method for Determination of Iodine Number of Activated Carbon

    D5029 Standard Test Method for Water Solubles in Activated Carbon

    D5158 Standard Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving

    D5919 Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations

    D6385 Standard Test Method for Determining Acid Extractable Content in Activated Carbon by Ashing

    D6586 Standard Practice for the Prediction of Contaminant Adsorption On GAC In Aqueous Systems Using Rapid Small-Scale Column Tests

    D6647 Standard Test Method for Determination of Acid Soluble Iron Via Atomic Absorption

    D6781 Standard Guide for Carbon Reactivation

    D6851 Standard Test Method for Determination of Contact pH with Activated Carbon


    D27.06 - Chemical Test

    D1533 Standard Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration

    D1534 Standard Test Method for Approximate Acidity in Electrical Insulating Liquids by Color-Indicator Titration

    D1934 Standard Test Method for Oxidative Aging of Electrical Insulating Petroleum Oils by Open-Beaker Method

    D2112 Standard Test Method for Oxidation Stability of Inhibited Mineral Insulating Oil by Pressure Vessel

    D2284 Standard Test Method for Acidity of Sulfur Hexafluoride

    D2440 Standard Test Method for Oxidation Stability of Mineral Insulating Oil

    D2522 Standard Test Method for Chlorine Content of Polybutenes Used for Electrical Insulation

    D3455 Standard Test Methods for Compatibility of Construction Material with Electrical Insulating Oil of Petroleum Origin

    D5282 Standard Test Methods for Compatibility of Construction Material with Silicone Fluid Used for Electrical Insulation


    D27.03 - Analytical Tests

    D2144 Standard Practices for Examination of Electrical Insulating Oils by Infrared Absorption

    D2668 Standard Test Method for 2,6-di-tert-Butyl- p-Cresol and 2,6-di-tert-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption

    D2685 Standard Test Method for Air and Carbon Tetrafluoride in Sulfur Hexafluoride by Gas Chromatography

    D3284 Standard Practice for Combustible Gases in the Gas Space of Electrical Apparatus Using Portable Meters

    D3612 Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography

    D3635 Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry

    D4059 Standard Test Method for Analysis of Polychlorinated Biphenyls in Insulating Liquids by Gas Chromatography

    D4768 Standard Test Method for Analysis of 2,6-Ditertiary-Butyl Para-Cresol and 2,6-Ditertiary-Butyl Phenol in Insulating Liquids by Gas Chromatography

    D5837 Standard Test Method for Furanic Compounds in Electrical Insulating Liquids by High-Performance Liquid Chromatography (HPLC)

    D6802 Test Method for Determination of the Relative Content Of Dissolved Decay Products in Mineral Insulating Oils by Spectrophotometry

    D7150 Standard Test Method for the Determination of Gassing Characteristics of Insulating Liquids Under Thermal Stress

    D7151 Standard Test Method for Determination of Elements in Insulating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

    D831/D831M Standard Test Method for Gas Content of Cable and Capacitor Oils


    D26.09 - Fire Extinguishing Agents

    D5631 Standard Practice for Handling, Transportation, and Storage of Halon 1301, Bromotrifluoromethane (CF3Br)

    D5632/D5632M Standard Specification for Halon 1301, Bromotrifluoromethane (CF3Br)

    D6064 Standard Specification for HFC-227ea, 1,1,1,2,3,3,3-Heptafluoropropane (CF3CHFCF3)

    D6065 Standard Practice for Handling, Transportation, and Storage of HFC-227ea 1,1,1,2,3,3,3-Heptafluoropropane (CF3CHFCF3)

    D6126/D6126M Standard Specification for HFC-23 (Trifluoromethane, CHF3)

    D6127 Standard Practice for Handling, Transportation, and Storage of HFC-23 (Trifluoromethane, CHF3)

    D6231 Standard Specification for HFC-125 (Pentafluoroethane, C2HF5)

    D6268 Standard Practice for Handling, Transportation, and Storage of HFC-125, Pentafluoroethane (C2HF5)

    D6427/D6427M Standard Practice for Handling, Transportation, and Storage of HFC-236fa, 1,1,1,3,3,3-Hexafluoropropane (CF3CH2CF3)

    D6541 Standard Specification for HFC-236fa, 1,1,1,3,3,3–Hexafluoropropane, (CF3CH 2CF3)

    D7122 Standard Specification for HCFC Blend B (CF3CCl2H, Ar, and CF4)

    D7123 Standard Practice for Handling, Transportation, and Storage of HCFC Blend B (CF3CCl2H, Ar, and CF4)

    D7323 Standard Practice for Handling, Transportation, and Storage of IG-100 (Nitrogen)

    D7324 Standard Practice for Handling, Transportation, and Storage of IG-55 Ar N2

    D7325 Standard Practice for Handling, Transportation, and Storage of IG-541 N2, Ar , CO2

    D7326 Standard Practice for Handling, Transportation, and Storage of HFC Blend B (CH2FCF3, CHF2 CF3, and CO2)

    D7327 Standard Specification for HFC Blend B (CH2FCF3, CHF2CF3, and CO2)

    D7673/D7673M Standard Specification for Halon 1211, Bromochlorodifluoromethane (CF2BrCl)

    D7815 Standard Practice for Handling, Transportation, and Storage of Halon 1211, Bromochlorodifluoromethane (CF2BrCl)


    D26.04 - Test Methods

    D1901 Standard Test Method for Relative Evaporation Time of Halogenated Organic Solvents and Their Admixtures

    D2106 Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents

    D2108 Standard Test Method for Color of Halogenated Organic Solvents and Their Admixtures (Platinum-Cobalt Scale)

    D2109 Standard Test Methods for Nonvolatile Matter in Halogenated Organic Solvents and Their Admixtures

    D2110 Standard Test Method for pH of Water Extractions of Halogenated Organic Solvents and Their Admixtures

    D2111 Standard Test Methods for Specific Gravity and Density of Halogenated Organic Solvents and Their Admixtures

    D2251 Standard Test Method for Metal Corrosion by Halogenated Organic Solvents and Their Admixtures

    D2942 Standard Test Method for Total Acid Acceptance of Halogenated Organic Solvents (Nonreflux Methods)

    D2943 Standard Test Method for Aluminum Scratch of 1,1,1-Trichloroethane to Determine Stability

    D2988 Standard Test Methods for Water-Soluble Halide Ion in Halogenated Organic Solvents and Their Admixtures

    D2989 Standard Test Method for Acidity-Alkalinity of Halogenated Organic Solvents and Their Admixtures

    D3316 Standard Test Method for Stability of Perchloroethylene with Copper

    D3401 Standard Test Methods for Water in Halogenated Organic Solvents and Their Admixtures

    D3443 Standard Test Method for Chloride in Trichlorotrifluoroethane

    D3444 Standard Test Method for Total Acid Number of Trichlorotrifluoroethane

    D3448 Standard Test Method for Specific Aqueous Conductance of Trichlorotrifluoroethane

    D3741 Standard Test Methods for Appearance of Admixtures Containing Halogenated Organic Solvents

    D4494 Standard Test Method for Detecting Residual Odor of Drycleaning Grade Perchloroethylene

    D4755 Standard Test Method for Free Halogens in Halogenated Organic Solvents and Their Admixtures

    D6505 Standard Test Method for Assay of normal-Propyl Bromide Content

    D6806 Standard Practice for Analysis of Halogenated Organic Solvents and Their Admixtures by Gas Chromatography


    D26.02 - Vapor Degreasing

    D3698 Standard Practice for Solvent Vapor Degreasing Operations

    D4079 Standard Specification for Vapor-Degreasing Grade Methylene Chloride

    D4080 Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing Grade

    D4126 Standard Specification for Vapor-Degreasing Grade and General Solvent Grade 1,1,1-Trichloroethane

    D4376 Standard Specification for Vapor-Degreasing Grade Perchloroethylene

    D4579 Standard Practice for Handling an Acid Degreaser or Still

    D5248 Standard Specification for Reclaimed 1,1,2-Trichloro 1,2,2-Trifluoroethane

    D5394 Standard Specification for Reclaimed 1,1,1-Trichloroethane

    D5395 Standard Specification for Reclaimed Methylene Chloride

    D5396 Standard Specification for Reclaimed Perchloroethylene

    D5616 Standard Specification for Reclaimed Trichloroethylene

    D5960 Standard Specification for Technical Grade Ethylene Dichloride

    D6368 Standard Specification for Vapor-Degreasing Solvents Based on normal-Propyl Bromide and Technical Grade normal-Propyl Bromide


    D24.66 - Environment, Health, and Safety

    D1619 Standard Test Methods for Carbon Black—Sulfur Content

    D6602 Standard Practice for Sampling and Testing of Possible Carbon Black Fugitive Emissions or Other Environmental Particulate, or Both

    D7633 Standard Test Method for Carbon Black—Carbon Content

    D7662 Standard Test Method for Carbon Content in Carbon Black Feedstock Oils

    D7679 Standard Test Method for Sulfur Content in Carbon Black Feedstock Oils

    D7771 Standard Test Method for Determination of Benzo-α-Pyrene (BaP) Content in Carbon Black

    D7772 Standard Test Method for Carbon Black Extractables - Absorbance of Cyclohexane Extract


    D24.61 - Carbon Black Sampling and Statistical Analysis

    D1799 Standard Practice for Carbon Black—Sampling Packaged Shipments

    D1900 Standard Practice for Carbon Black - Sampling Bulk Shipments

    D4122 Standard Practice for Carbon Black—Evaluation of an Industry Reference Black

    D4583 Standard Practice for Carbon Black—Calculation of Process Indexes From an Analysis of Process Control Data

    D4821 Standard Guide for Carbon Black—Validation of Test Method Precision and Bias

    D5817 Standard Practice for Carbon Black, Pelleted—Reduction, Blending, and Drying of Gross Samples for Testing

    D6915 Standard Practice for Carbon Black—Evaluation of Standard Reference Blacks


    D24.41 - Carbon Black Nomenclature and Terminology

    D1765 Standard Classification System for Carbon Blacks Used in Rubber Products

    D3053 Standard Terminology Relating to Carbon Black

    D7849 Standard Classification for Nomenclature of Reference Materials of Committee D24


    D24.31 - Non-Carbon Black Components of Carbon Black

    D1506 Standard Test Methods for Carbon Black—Ash Content

    D1509 Standard Test Methods for Carbon Black—Heating Loss

    D1512 Standard Test Methods for Carbon Black—pH Value

    D1514 Standard Test Method for Carbon Black - Sieve Residue

    D1618 Standard Test Method for Carbon Black Extractables - Transmittance of Toluene Extract

    D4527 Standard Test Method for Carbon Black - Solvent Extractables

    D7724 Standard Test Method for Carbon Black - Non-Dispersible Matter by Mechanical Flushing (NDM)


    D22.05 - Indoor Air

    D4861 Standard Practice for Sampling and Selection of Analytical Techniques for Pesticides and Polychlorinated Biphenyls in Air

    D5075 Standard Test Method for Nicotine and 3-Ethenylpyridine in Indoor Air

    D5116 Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions From Indoor Materials/Products

    D5157 Standard Guide for Statistical Evaluation of Indoor Air Quality Models

    D5197 Standard Test Method for Determination of Formaldehyde and Other Carbonyl Compounds in Air (Active Sampler Methodology)

    D5438 Standard Practice for Collection of Floor Dust for Chemical Analysis

    D5466 Standard Test Method for Determination of Volatile Organic Chemicals in Atmospheres (Canister Sampling Methodology)

    D5791 Standard Guide for Using Probability Sampling Methods in Studies of Indoor Air Quality in Buildings

    D5955 Standard Test Methods for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on UVPM and FPM

    D6177 Standard Practice for Determining Emission Profiles of Volatile Organic Chemicals Emitted from Bedding Sets

    D6178 Standard Practice for Estimation of Short-term Inhalation Exposure to Volatile Organic Chemicals Emitted from Bedding Sets

    D6196 Standard Practice for Selection of Sorbents, Sampling, and Thermal Desorption Analysis Procedures for Volatile Organic Compounds in Air

    D6245 Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation

    D6271 Standard Test Method for Estimating Contribution of Environmental Tobacco Smoke to Respirable Suspended Particles Based on Solanesol

    D6306 Standard Guide for Placement and Use of Diffusion Controlled Passive Monitors for Gaseous Pollutants in Indoor Air

    D6327 Standard Test Method for Determination of Radon Decay Product Concentration and Working Level in Indoor Atmospheres by Active Sampling on a Filter

    D6330 Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions

    D6332 Standard Guide for Testing Systems for Measuring Dynamic Responses of Carbon Monoxide Detectors to Gases and Vapors

    D6333 Standard Practice for Collection of Dislodgeable Pesticide Residues from Floors

    D6345 Standard Guide for Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air

    D6399 Standard Guide for Selecting Instruments and Methods for Measuring Air Quality In Aircraft Cabins

    D6485 Standard Guide for Risk Characterization of Acute and Irritant Effects of Short-Term Exposure to Volatile Organic Chemicals Emitted from Bedding Sets

    D6669 Standard Practice for Selecting and Constructing Exposure Scenarios for Assessment of Exposures to Alkyd and Latex Interior Paints

    D6670 Standard Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products

    D6803 Standard Practice for Testing and Sampling of Volatile Organic Compounds (Including Carbonyl Compounds) Emitted from Paint Using Small Environmental Chambers

    D7034 Standard Guide for Deriving Acceptable Levels of Airborne Chemical Contaminants in Aircraft Cabins Based on Health and Comfort Considerations

    D7143 Standard Practice for Emission Cells for the Determination of Volatile Organic Emissions from Indoor Materials/Products

    D7297 Standard Practice for Evaluating Residential Indoor Air Quality Concerns

    D7339 Standard Test Method for Determination of Volatile Organic Compounds Emitted from Carpet using a Specific Sorbent Tube and Thermal Desorption / Gas Chromatography

    D7706 Standard Practice for Rapid Screening of VOC Emissions from Products Using Micro-Scale Chambers

    D7859 Standard Practice for Spraying, Sampling, Packaging, and Test Specimen Preparation of Spray Polyurethane Foam (SPF) Insulation for Testing of Emissions Using Environmental Chambers

    D7911 Standard Guide for Using Reference Material to Characterize Measurement Bias Associated with Volatile Organic Compound Emission Chamber Test

    F1471 Standard Test Method for Air Cleaning Performance of a High-Efficiency Particulate Air- Filter System


    D22.04 - Workplace Air Quality

    D3686 Standard Practice for Sampling Atmospheres to Collect Organic Compound Vapors (Activated Charcoal Tube Adsorption Method)

    D3687 Standard Practice for Analysis of Organic Compound Vapors Collected by the Activated Charcoal Tube Adsorption Method

    D4185 Standard Practice for Measurement of Metals in Workplace Atmospheres by Flame Atomic Absorption Spectrophotometry

    D4490 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Detector Tubes

    D4532 Standard Test Method for Respirable Dust in Workplace Atmospheres Using Cyclone Samplers

    D4597 Standard Practice for Sampling Workplace Atmospheres to Collect Gases or Vapors with Solid Sorbent Diffusive Samplers

    D4599 Standard Practice for Measuring the Concentration of Toxic Gases or Vapors Using Length-of-Stain Dosimeters

    D4600 Standard Test Method for Determination of Benzene-Soluble Particulate Matter in Workplace Atmospheres

    D4765 Standard Test Method for Measurement of Fluorides in Workplace Atmospheres by Ion-Selective Electrodes

    D4766 Standard Test Method for Vinyl Chloride in Workplace Atmospheres (Charcoal Tube Method)

    D4856 Standard Test Method for Determination of Sulfuric Acid Mist in Workplace Atmospheres Collected on Mixed Cellulose Ester Filters (Ion Chromatographic Analysis)

    D4913 Standard Practice for Determining Concentration of Hydrogen Sulfide by Direct Reading, Length of Stain, Visual Chemical Detectors

    D5337 Standard Practice for Flow Rate for Calibration of Personal Sampling Pumps

    D5578 Standard Test Method for Determination of Ethylene Oxide in Workplace Atmospheres (HBr Derivatization Method)

    D5836 Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Workplace Atmospheres (1-2 PP Method)

    D5932 Standard Test Method for Determination of 2,4-Toluene Diisocyanate (2,4-TDI) and 2,6-Toluene Diisocyanate (2,6-TDI) in Air (with 9-(N-Methylaminomethyl) Anthracene Method) (MAMA) in the Workplace

    D6056 Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Transmission Electron Microscopy

    D6057 Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Phase Contrast Microscopy

    D6058 Standard Practice for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment

    D6059 Standard Test Method for Determining Concentration of Airborne Single-Crystal Ceramic Whiskers in the Workplace Environment by Scanning Electron Microscopy

    D6061 Standard Practice for Evaluating the Performance of Respirable Aerosol Samplers

    D6062 Standard Guide for Personal Samplers of Health-Related Aerosol Fractions

    D6246 Standard Practice for Evaluating the Performance of Diffusive Samplers

    D6494 Standard Test Method for Determination of Asphalt Fume Particulate Matter in Workplace Atmospheres as Benzene Soluble Fraction

    D6552 Standard Practice for Controlling and Characterizing Errors in Weighing Collected Aerosols

    D6561 Standard Test Method for Determination of Aerosol Monomeric and Oligomeric Hexamethylene Diisocyanate (HDl) in Air with (Methoxy-2–phenyl-1) Piperazine (MOPIP) in the Workplace

    D6562 Standard Test Method for Determination of Gaseous Hexamethylene Diisocyanate (HDI) in Air with 9-(N-methylaminomethyl) Anthracene Method (MAMA) in the Workplace

    D6785 Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry

    D6832 Standard Test Method for the Determination of Hexavalent Chromium in Workplace Air by Ion Chromatography and Spectrophotometric Measurement Using 1,5-diphenylcarbazide

    D6877 Standard Test Method for Monitoring Diesel Particulate Exhaust in the Workplace

    D6966 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals

    D7035 Standard Test Method for Determination of Metals and Metalloids in Airborne Particulate Matter by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

    D7049 Standard Test Method for Metal Removal Fluid Aerosol in Workplace Atmospheres

    D7144 Standard Practice for Collection of Surface Dust by Micro-vacuum Sampling for Subsequent Metals Determination

    D7200 Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in Mines and Quarries, by Phase Contrast Microscopy and Transmission Electron Microscopy

    D7201 Standard Practice for Sampling and Counting Airborne Fibers, Including Asbestos Fibers, in the Workplace, by Phase Contrast Microscopy (with an Option of Transmission Electron Microscopy)

    D7202 Standard Test Method for Determination of Beryllium in the Workplace by Extraction and Optical Fluorescence Detection

    D7296 Standard Practice for Collection of Settled Dust Samples Using Dry Wipe Sampling Methods for Subsequent Determination of Beryllium and Compounds

    D7439 Standard Test Method for Determination of Elements in Airborne Particulate Matter by Inductively Coupled Plasma–Mass Spectrometry

    D7441 Standard Practice for Separation of Beryllium from Other Metals in Digestion and Extraction Solutions from Workplace Dust Samples

    D7659 Standard Guide for Strategies for Surface Sampling of Metals and Metalloids for Worker Protection

    D7707 Standard Specification for Wipe Sampling Materials for Beryllium in Surface Dust

    D7773 Standard Test Method for Determination of Volatile Inorganic Acids (HCl, HBr, and HNO3 ) Using Filter Sampling and Suppressed Ion Chromatography

    D7822 Standard Practice for Dermal Wipe Sampling for the Subsequent Determination of Metals and Metalloids

    D7948 Standard Test Method for Measurement of Respirable Crystalline Silica in Workplace Air by Infrared Spectrometry

    E1370 Standard Guide for Air Sampling Strategies for Worker and Workplace Protection


    D22.03 - Ambient Atmospheres and Source Emissions

    D1357 Standard Practice for Planning the Sampling of the Ambient Atmosphere

    D1607 Standard Test Method for Nitrogen Dioxide Content of the Atmosphere (Griess-Saltzman Reaction)

    D1608 Standard Test Method for Oxides of Nitrogen in Gaseous Combustion Products (Phenol-Disulfonic Acid Procedures)

    D1739 Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter)

    D2010/D2010M Standard Test Methods for Evaluation of Total Sulfation Activity in the Atmosphere by the Lead Dioxide Technique

    D2913 Standard Test Method for Mercaptan Content of the Atmosphere

    D2914 Standard Test Methods for Sulfur Dioxide Content of the Atmosphere (West-Gaeke Method)

    D3154 Standard Test Method for Average Velocity in a Duct (Pitot Tube Method)

    D3162 Standard Test Method for Carbon Monoxide in the Atmosphere (Continuous Measurement by Nondispersive Infrared Spectrometry)

    D3249 Standard Practice for General Ambient Air Analyzer Procedures

    D3266 Standard Test Method for Automated Separation and Collection of Particulate and Acidic Gaseous Fluoride in the Atmosphere (Double Paper Tape Sampler Method)

    D3267 Standard Test Method for Separation and Collection of Particulate and Water-Soluble Gaseous Fluorides in the Atmosphere (Filter and Impinger Method)

    D3268 Standard Test Method for Separation and Collection of Particulate and Gaseous Fluorides in the Atmosphere (Sodium Bicarbonate-Coated Glass Tube and Particulate Filter Method)

    D3270 Standard Test Methods for Analysis for Fluoride Content of the Atmosphere and Plant Tissues (Semiautomated Method)

    D3464 Standard Test Method for Average Velocity in a Duct Using a Thermal Anemometer

    D3608 Standard Test Method for Nitrogen Oxides (Combined) Content in the Atmosphere by the Griess-Saltzman Reaction

    D3685/D3685M Standard Test Methods for Sampling and Determination of Particulate Matter in Stack Gases

    D3796 Standard Practice for Calibration of Type S Pitot Tubes

    D3824 Standard Test Methods for Continuous Measurement of Oxides of Nitrogen in the Ambient or Workplace Atmosphere by the Chemiluminescent Method

    D4096 Standard Test Method for Determination of Total Suspended Particulate Matter in the Atmosphere (High-Volume Sampler Method)

    D4323 Standard Test Method for Hydrogen Sulfide in the Atmosphere by Rate of Change of Reflectance

    D5011 Standard Practices for Calibration of Ozone Monitors Using Transfer Standards

    D5012 Standard Guide for Preparation of Materials Used for the Collection and Preservation of Atmospheric Wet Deposition

    D5015 Standard Test Method for pH of Atmospheric Wet Deposition Samples by Electrometric Determination

    D5085 Standard Test Method for Determination of Chloride, Nitrate, and Sulfate in Atmospheric Wet Deposition by Chemically Suppressed Ion Chromatography

    D5086 Standard Test Method for Determination of Calcium, Magnesium, Potassium, and Sodium in Atmospheric Wet Deposition by Flame Atomic Absorption Spectrophotometry

    D5110 Standard Practice for Calibration of Ozone Monitors and Certification of Ozone Transfer Standards Using Ultraviolet Photometry

    D5111 Standard Guide for Choosing Locations and Sampling Methods to Monitor Atmospheric Deposition at Non-Urban Locations

    D5149 Standard Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence

    D5156 Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)

    D5280 Standard Practice for Evaluation of Performance Characteristics of Air Quality Measurement Methods with Linear Calibration Functions

    D5835 Standard Practice for Sampling Stationary Source Emissions for the Automated Determination of Gas Concentrations

    D5953M Standard Test Method for Determination of Non-Methane Organic Compounds (NMOC) in Ambient Air Using Cryogenic Preconcentration and Direct Flame Ionization Detection Method (Metric)

    D6060 Standard Practice for Sampling of Process Vents With a Portable Gas Chromatograph

    D6209 Standard Test Method for Determination of Gaseous and Particulate Polycyclic Aromatic Hydrocarbons in Ambient Air (Collection on Sorbent-Backed Filters with Gas Chromatographic/Mass Spectrometric Analysis)

    D6216 Standard Practice for Opacity Monitor Manufacturers to Certify Conformance with Design and Performance Specifications

    D6328 Standard Guide for Quality Assurance Protocols for Chemical Analysis of Atmospheric Wet Deposition

    D6331 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)

    D6348 Standard Test Method for Determination of Gaseous Compounds by Extractive Direct Interface Fourier Transform Infrared (FTIR) Spectroscopy

    D6363 Standard Test Method for Determination of Hydrogen Peroxide and Combined Organic Peroxides in Atmospheric Water Samples by Peroxidase Enzyme Fluorescence Method

    D6420 Standard Test Method for Determination of Gaseous Organic Compounds by Direct Interface Gas Chromatography-Mass Spectrometry

    D6522 Standard Test Method for Determination of Nitrogen Oxides, Carbon Monoxide, and Oxygen Concentrations in Emissions from Natural Gas-Fired Reciprocating Engines, Combustion Turbines, Boilers, and Process Heaters Using Portable Analyzers

    D6735 Standard Test Method for Measurement of Gaseous Chlorides and Fluorides from Mineral Calcining Exhaust Sources—Impinger Method

    D6784 Standard Test Method for Elemental, Oxidized, Particle-Bound and Total Mercury in Flue Gas Generated from Coal-Fired Stationary Sources (Ontario Hydro Method)

    D6830 Standard Test Method for Characterizing the Pressure Drop and Filtration Performance of Cleanable Filter Media

    D6831 Standard Test Method for Sampling and Determining Particulate Matter in Stack Gases Using an In-Stack, Inertial Microbalance

    D7036 Standard Practice for Competence of Air Emission Testing Bodies

    D7295 Standard Practice for Sampling and Determination of Hydrogen Cyanide (HCN) in Combustion Effluents and Other Stationary Sources

    D7392 Standard Practice for PM Detector and Bag Leak Detector Manufacturers to Certify Conformance with Design and Performance Specifications for Cement Plants

    D7459 Standard Practice for Collection of Integrated Samples for the Speciation of Biomass (Biogenic) and Fossil-Derived Carbon Dioxide Emitted from Stationary Emissions Sources

    D7520 Standard Test Method for Determining the Opacity of a Plume in the Outdoor Ambient Atmosphere

    D7614 Standard Test Method for Determination of Total Suspended Particulate (TSP) Hexavalent Chromium in Ambient Air Analyzed by Ion Chromatography (IC) and Spectrophotometric Measurements

    F778 Standard Methods for Gas Flow Resistance Testing of Filtration Media


    D22.01 - Quality Control

    D1356 Standard Terminology Relating to Sampling and Analysis of Atmospheres

    D1914 Standard Practice for Conversion Units and Factors Relating to Sampling and Analysis of Atmospheres

    D3195/D3195M Standard Practice for Rotameter Calibration

    D3609 Standard Practice for Calibration Techniques Using Permeation Tubes

    D3614 Standard Guide for Laboratories Engaged in Sampling and Analysis of Atmospheres and Emissions

    D3670 Standard Guide for Determination of Precision and Bias of Methods of Committee D22

    D4298 Standard Guide for Intercomparing Permeation Tubes to Establish Traceability

    D7440 Standard Practice for Characterizing Uncertainty in Air Quality Measurements


    D21.91 - Terminology and Editorial Review

    D2825 Standard Terminology Relating to Polishes and Related Materials


    D21.06 - Slip Resistance

    D2047 Standard Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James Machine

    D4103 Standard Practice for Preparation of Substrate Surfaces for Coefficient of Friction Testing

    D6205 Standard Practice for Calibration of the James Static Coefficient of Friction Machine


    D21.05 - Specifications

    D3440 Standard Guide for Preparing Specifications for Water-Emulsion Floor Polishes

    D3564 Standard Practice for Application of Floor Polishes to Maintain Vinyl Composition Tile or Flooring

    D3757 Standard Guide for Preparing Specifications for Solvent-based Floor Polishes

    D4078 Standard Specification for Water Emulsion Floor Polish

    D4386 Standard Practice for Application of Floor Polishes to Maintain Multilayer Composite Tile or Flooring


    D21.04 - Performance Tests

    D1436 Standard Test Methods for Application of Emulsion Floor Polishes to Substrates for Testing Purposes

    D1455 Standard Test Method for 60° Specular Gloss of Emulsion Floor Polish

    D1792 Standard Test Method for Long-Term Removability Properties of Emulsion Floor Polishes

    D1793 Standard Test Method for Water Spotting of Emulsion Floor Polishes

    D2048 Standard Test Method for Powdering of Floor Polish Films

    D3052 Standard Practice for Rating Water-Emulsion Floor Polishes

    D3153 Standard Test Method for Recoatability of Water-Emulsion Floor Polishes

    D3206 Standard Test Method for Soil Resistance of Floor Polishes

    D3207 Standard Test Method for Detergent Resistance of Floor Polish Films

    D3210 Standard Test Method for Comparing Colors of Films from Water-Emulsion Floor Polishes

    D3543 Standard Test Method for Metal Glide Adhesion

    D3751/D3751M Standard Practice for Evaluation of Furniture Polish

    D3758 Standard Practice for Evaluation of Spray-Buff Products on Test Floors

    D3836 Standard Practice for Evaluation of Automotive Polish

    D4002 Standard Practice for Evaluation of Buffable Shoe Polish

    D4330 Standard Practice for Evaluation of Fiberglass Boat Polish and Wax

    D4955 Standard Practice for Field Evaluation of Automotive Polish

    D6625 Standard Practice for Conducting a Test of Protective Properties of Polish Applied to a Painted Panel Using Fluorescent UV-Condensation Light- and Water-Exposure Apparatus


    D21.03 - Chemical and Physical Testing

    D1290 Standard Test Method for Sediment in Water-Emulsion Polishes by Centrifuge

    D1791 Standard Test Method for Accelerated Aging of Liquid Water-Emulsion Floor Polishes

    D2834 Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor Polishes

    D3209 Standard Test Method for Freeze/Thaw Resistance of Polymer Floor Polishes

    D3430 Standard Test Method for Clarity and Yellowness of Liquid Water-Based Clear Floor Polishes

    D3716 Standard Test Methods for Use of Emulsion Polymers in Floor Polishes

    D4095 Standard Practice for Use of the Refractometer for Determining Nonvolatile Matter (Total Solids) in Floor Polishes

    D5678 Standard Test Method for Freeze/Thaw Resistance of Wax Emulsion Floor Polish

    D6827 Standard Test Method for Zinc Analysis of Floor Polishes and Floor Polish Polymers By Flame Atomic Absorption (A.A.)


    D21.02 - Raw Materials

    D1386 Standard Test Method for Acid Number (Empirical) of Synthetic and Natural Waxes

    D1387 Standard Test Method for Saponification Number (Empirical) of Synthetic and Natural Waxes

    D1986 Standard Test Method for Determining the Apparent Viscosity of Polyethylene Wax

    D3642 Standard Test Method for Softening Point of Certain Alkali-Soluble Resins

    D3643 Standard Test Method for Acid Number of Certain Alkali-Soluble Resins

    D3644 Standard Test Method for Acid Number of Styrene-Maleic Anhydride Resins

    D3837 Standard Practice for Preparing a Solution of Alkali–Soluble Resins

    D3954 Standard Test Method for Dropping Point of Waxes

    D4283 Standard Test Method for Viscosity of Silicone Fluids

    D7389 Standard Test Method for Acid Number (Empirical) of Maleic Anhydride (MAH) Grafted Waxes


    D20.96 - Environmentally Degradable Plastics and Biobased Products

    D3826 Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test

    D5071 Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus

    D5208 Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics

    D5210 Standard Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge

    D5272 Standard Practice for Outdoor Exposure Testing of Photodegradable Plastics

    D5338 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions, Incorporating Thermophilic Temperatures

    D5511 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions

    D5526 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions

    D5988 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in Soil

    D6340 Standard Test Methods for Determining Aerobic Biodegradation of Radiolabeled Plastic Materials in an Aqueous or Compost Environment

    D6400 Standard Specification for Labeling of Plastics Designed to be Aerobically Composted in Municipal or Industrial Facilities

    D6691 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium or Natural Sea Water Inoculum

    D6866 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis

    D6868 Standard Specification for Labeling of End Items that Incorporate Plastics and Polymers as Coatings or Additives with Paper and Other Substrates Designed to be Aerobically Composted in Municipal or Industrial Facilities

    D6954 Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation

    D7026 Standard Guide for Sampling and Reporting of Results for Determination of Biobased Content of Materials via Carbon Isotope Analysis

    D7444 Standard Practice for Heat and Humidity Aging of Oxidatively Degradable Plastics

    D7473 Standard Test Method for Weight Attrition of Plastic Materials in the Marine Environment by Open System Aquarium Incubations

    D7475 Standard Test Method for Determining the Aerobic Degradation and Anaerobic Biodegradation of Plastic Materials under Accelerated Bioreactor Landfill Conditions


    D20.70 - Analytical Methods

    D1505 Standard Test Method for Density of Plastics by the Density-Gradient Technique

    D1601 Standard Test Method for Dilute Solution Viscosity of Ethylene Polymers

    D1603 Standard Test Method for Carbon Black Content in Olefin Plastics

    D1895 Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials

    D1921 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials

    D2124 Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique

    D2238 Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm−1

    D2857 Standard Practice for Dilute Solution Viscosity of Polymers

    D3016 Standard Practice for Use of Liquid Exclusion Chromatography Terms and Relationships

    D3124 Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry

    D3465 Standard Test Method for Purity of Monomeric Plasticizers by Gas Chromatography

    D3591 Standard Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in Formulated Compounds

    D3594 Standard Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers

    D3749 Standard Test Method for Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins by Gas Chromatographic Headspace Technique

    D4001 Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering

    D4218 Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds By the Muffle-Furnace Technique

    D4275 Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and Ethylene–Vinyl Acetate (EVA) Copolymers By Gas Chromatography

    D4443 Standard Test Method for Determining Residual Vinyl Chloride Monomer Content in PPB Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography

    D4526 Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography

    D4603 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer

    D4754 Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell

    D4883 Standard Test Method for Density of Polyethylene by the Ultrasound Technique

    D494 Standard Test Method for Acetone Extraction of Phenolic Molded or Laminated Products

    D5017 Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance

    D5225 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer

    D5226 Standard Practice for Dissolving Polymer Materials

    D5227 Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins

    D5296 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography

    D5477 Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)

    D5507 Standard Test Method for Determination of Trace Organic Impurities in Monomer Grade Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography

    D5508 Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)

    D5576 Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)

    D5594 Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)

    D5630 Standard Test Method for Ash Content in Plastics

    D6042 Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC)

    D6247 Standard Test Method for Determination of Elemental Content of Polyolefins by Wavelength Dispersive X-ray Fluorescence Spectrometry

    D6248 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry

    D6474 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography

    D6645 Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry

    D6869 Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)

    D6953 Standard Test Method for Determination of Antioxidants and Erucamide Slip Additives in Polyethylene Using Liquid Chromatography (LC)

    D6980 Standard Test Method for Determination of Moisture in Plastics by Loss in Weight

    D7083 Standard Practice for Determination of Monomeric Plasticizers in Poly (Vinyl Chloride) (PVC) by Gas Chromatography

    D7132 Standard Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene Foam

    D7134 Standard Test Method for Molecular Mass Averages and Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser Desorption/Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS)

    D7191 Standard Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor

    D7210 Standard Practice for Extraction of Additives in Polyolefin Plastics

    D7399 Standard Test Method for Determination of the Amount of Polypropylene (PP) in Polypropylene/LDPE Mixtures Using Infrared Spectrophotometer (FTIR)

    D7486 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis

    D7567 Standard Test Method for Determining Gel Content in Crosslinked Ethylene Plastics Using Pressurized Liquid Extraction

    D7823 Standard Test Method for Determination of Low Level, Regulated Phthalates in Poly (Vinyl Chloride) Plastics by Thermal Desorption—Gas Chromatography/Mass Spectrometry

    D792 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement

    D7993 Standard Guide for Analyzing Complex Phthalates


    D20.50 - Durability of Plastics

    D1042 Standard Test Method for Linear Dimensional Changes of Plastics Caused by Exposure to Heat and Moisture

    D1435 Standard Practice for Outdoor Weathering of Plastics

    D1499 Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics

    D1712 Standard Practice for Resistance of Plastics to Sulfide Staining

    D2565 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications

    D3045 Standard Practice for Heat Aging of Plastics Without Load

    D4329 Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics

    D4364 Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight

    D4459 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications

    D4674 Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments

    D543 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents

    D570 Standard Test Method for Water Absorption of Plastics

    D5870 Standard Practice for Calculating Property Retention Index of Plastics

    D618 Standard Practice for Conditioning Plastics for Testing

    D6360 Standard Practice for Enclosed Carbon-Arc Exposures of Plastics


    D20.30 - Thermal Properties

    D1238 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer

    D1525 Standard Test Method for Vicat Softening Temperature of Plastics

    D1790 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact

    D1929 Standard Test Method for Determining Ignition Temperature of Plastics

    D2843 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics

    D2863 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)

    D3014 Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position

    D3123 Standard Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds

    D3364 Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications

    D3418 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry

    D3675 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source

    D3795 Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer

    D3801 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position

    D3835 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer

    D3895 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry

    D4804 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics

    D4986 Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials

    D5025 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials

    D5048 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame

    D5132 Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles

    D5207 Standard Practice for Confirmation of 20–mm (50–W) and 125–mm (500–W) Test Flames for Small-Scale Burning Tests on Plastic Materials

    D5422 Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer

    D5930 Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique

    D635 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position

    D648 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position

    D696 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer

    D7309 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry

    D731 Standard Test Method for Molding Index of Thermosetting Molding Powder

    D746 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact


    D20.22 - Cellular Materials - Plastics and Elastomers

    D1056 Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber

    D1621 Standard Test Method for Compressive Properties Of Rigid Cellular Plastics

    D1622/D1622M Standard Test Method for Apparent Density of Rigid Cellular Plastics

    D1623 Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics

    D1667 Standard Specification for Flexible Cellular Materials - Poly (Vinyl Chloride) Foam (Closed-Cell)

    D1786 Standard Specification for Toluene Diisocyanate

    D2126 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging

    D2842 Standard Test Method for Water Absorption of Rigid Cellular Plastics

    D3453 Standard Specification for Flexible Cellular Materials—Urethane for Furniture and Automotive Cushioning, Bedding, and Similar Applications

    D3489 Standard Test Methods for Microcellular Urethane Materials

    D3574 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams

    D3575 Standard Test Methods for Flexible Cellular Materials Made From Olefin Polymers

    D3576 Standard Test Method for Cell Size of Rigid Cellular Plastics

    D3676 Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay

    D3748 Standard Practice for Evaluating High-Density Rigid Cellular Plastics

    D3768 Standard Test Method for Microcellular Urethanes—Flexural Recovery

    D3769 Standard Test Method for Microcellular Urethanes--High Temperature Sag

    D3851 Standard Specification for Urethane Microcellular Shoe Soling Materials

    D4273 Standard Test Method for Polyurethane Raw Materials: Determination of Primary Hydroxyl Content of Polyether Polyols

    D4274 Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of Polyols

    D4659 Standard Test Methods for Polyurethane Raw Materials: Determination of Specific Gravity of Isocyanates

    D4660 Standard Test Methods for Polyurethane Raw Materials: Determination of the Isomer Content of Toluenediisocyanate

    D4661 Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine in Isocyanates

    D4662 Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols

    D4663 Standard Test Method for Polyurethane Raw Materials Determination of Hydrolyzable Chlorine of Isocyanates

    D4669 Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols

    D4670 Standard Test Method for Polyurethane Raw Materials: Determination of Suspended Matter In Polyols

    D4671 Standard Test Method for Polyurethane Raw Materials Determination of Unsaturation of Polyols

    D4672 Standard Test Method for Polyurethane Raw Materials: Determination of Water Content of Polyols

    D4819 Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics

    D4875 Standard Test Methods of Polyurethane Raw Materials: Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols

    D4877 Standard Test Method for Polyurethane Raw Materials: Determination of APHA Color in Isocyanates

    D4878 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols

    D4889 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates

    D4890 Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA Color of Polyols

    D5155 Standard Test Methods for Polyurethane Raw Materials: Determination of the Isocyanate Content of Aromatic Isocyanates

    D5523 Standard Test Method for Polyurethane Raw Materials: Acidity by Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates

    D5629 Standard Test Method for Polyurethane Raw Materials Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers

    D5672 Standard Test Method for Testing Flexible Cellular Materials Measurement of Indentation Force Deflection Using a 25-mm (1-in.) Deflection Technique

    D6099 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates

    D6226 Standard Test Method for Open Cell Content of Rigid Cellular Plastics

    D6342 Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy

    D6437 Standard Test Method for Polyurethane Raw Materials: alkalinity in Low-Alkalinity Polyols (Determination of CPR values of Polyols)

    D6576 Standard Specification for Flexible Cellular Rubber Chemically Blown

    D6979 Standard Test Method for Polyurethane Raw Materials: Determination of Basicity in Polyols, Expressed as Percent Nitrogen

    D7133 Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids

    D7252 Standard Test Method for Polyurethane Raw Materials: Determination of Monomer and Isomers in Isocyanates

    D7253 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols

    D7487 Standard Practice for Polyurethane Raw Materials: Polyurethane Foam Cup Test

    D7710 Standard Test Method for Determination of Volume and Density of Rigid and Irregularly Shaped Molded Cellular Materials


    D20.18 - Reinforced Thermosetting Plastics

    D2291 Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites

    D2343 Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics

    D2562 Standard Practice for Classifying Visual Defects in Parts Molded from Reinforced Thermosetting Plastics

    D2563 Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts

    D2584 Standard Test Method for Ignition Loss of Cured Reinforced Resins

    D2734 Standard Test Methods for Void Content of Reinforced Plastics

    D3647 Standard Practice for Classifying Reinforced Plastic Pultruded Shapes According to Composition

    D3846 Standard Test Method for In-Plane Shear Strength of Reinforced Plastics

    D3914 Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod

    D3916 Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod

    D3917 Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes

    D3918 Standard Terminology Relating to Reinforced Plastic Pultruded Products

    D4385 Standard Practice for Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products

    D4475 Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method

    D4476/D4476M Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods

    D5028 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis

    D5117 Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock

    D7029 Standard Test Method for Determination of Reactivity of Unsaturated Polyesters and Vinyl Esters at 180.0F [82.2°C]

    D7745 Standard Practice for Testing Pultruded Composites


    D20.16 - Thermosetting Materials

    D1201 Standard Specification for Thermosetting Polyester Molding Compounds

    D1636 Standard Specification for Allyl Molding Compounds

    D1763 Standard Specification for Epoxy Resins

    D3013 Standard Specification for Epoxy Molding Compounds

    D4350 Standard Test Method for Corrosivity Index of Plastics and Fillers

    D5948 Standard Specification for Molding Compounds, Thermosetting

    D704 Standard Specification for Melamine-Formaldehyde Molding Compounds

    D705 Standard Specification for Urea-Formaldehyde Molding Compounds


    D20.15.01 - Polyethylene Plastics (Disbanded 01/2012)


    D20.15 - Thermoplastic Materials

    D1045 Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics

    D1203 Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods

    D1243 Standard Test Method for Dilute Solution Viscosity of Vinyl Chloride Polymers

    D1248 Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable

    D1430 Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics

    D1562 Standard Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds

    D1693 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics

    D1710 Standard Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes

    D1755 Standard Specification for Poly(Vinyl Chloride) Resins

    D1784 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds

    D1823 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer

    D1824 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates

    D2115 Standard Practice for Oven Heat Stability of Poly(Vinyl Chloride) Compositions

    D2116 Standard Specification for FEP-Fluorocarbon Molding and Extrusion Materials

    D2222 Standard Test Method for Methanol Extract of Vinyl Chloride Resins

    D2287 Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds

    D2383 Standard Practice for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds Under Humid Conditions

    D2396 Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer

    D2538 Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer

    D2581 Standard Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials

    D2647 Standard Specification for Crosslinkable Ethylene Plastics

    D2765 Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics

    D2839 Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene

    D3012 Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven

    D3030 Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins

    D3159 Standard Specification for Modified ETFE-Fluoropolymer Molding and Extrusion Materials

    D3222 Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials

    D3275 Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials

    D3291 Standard Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression

    D3294 Standard Specification for PTFE Resin Molded Sheet and Molded Basic Shapes

    D3295 Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing

    D3296 Standard Specification for FEP-Fluorocarbon Tube

    D3307 Standard Specification for Perfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion Materials

    D3308 Standard Specification for PTFE Resin Skived Tape

    D3350 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials

    D3367 Standard Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force

    D3368 Standard Specification for FEP-Fluorocarbon Sheet and Film

    D3595 Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film

    D3596 Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins

    D3935 Standard Specification for Polycarbonate (PC) Unfilled and Reinforced Material

    D3965 Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings

    D4020 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials

    D4066 Standard Classification System for Nylon Injection and Extrusion Materials (PA)

    D4067 Standard Classification System for and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods

    D4101 Standard Specification for Polypropylene Injection and Extrusion Materials

    D4203 Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials

    D4216 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds

    D4349 Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials

    D4441 Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene

    D4549 Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)

    D4591 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry

    D4634 Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)

    D4673 Standard Classification System for Acrylonitrile-Butadiene-Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials

    D4745 Standard Classification System and Basis for Specification for Filled Polytetrafluoroethlyene (PTFE) Molding and Extrusion Materials Using ASTM Methods

    D4802 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet

    D4894 Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials

    D4895 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion

    D4969 Standard Specification for Polytetrafluoroethylene–(PTFE) Coated Glass Fabric

    D4976 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials

    D5138 Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP)

    D5203 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer (HDPE) Sources

    D5204 Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials

    D5205 Standard Classification System for Polyetherimide (PEI) Materials

    D5260 Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds

    D5336 Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Materials

    D5436 Standard Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes

    D5491 Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials

    D5492 Standard Test Method for Determination of Xylene Solubles in Propylene Plastics

    D5575 Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers

    D5675 Standard Classification for Low Molecular Weight PTFE and FEP Micronized Powders

    D5857 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology

    D5927 Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods

    D5989 Standard Specification for Extruded and Monomer Cast Shapes Made from Nylon (PA)

    D5998 Standard Specification for Molded Polyethylene Shipping and Storage Drums

    D6040 Standard Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape

    D6098 Standard Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)

    D6100 Standard Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes (POM)

    D6150 Standard Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility

    D6261 Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)

    D6262 Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK)

    D6263 Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)

    D6338 Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPVs) Based on ASTM Standard Test Methods

    D6339 Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS)

    D6358 Standard Classification System and Basis for Specification for Poly (Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ISO Methods

    D6394 Standard Specification for Sulfone Plastics (SP)

    D6456 Standard Specification for Finished Parts Made from Polyimide Resin

    D6457 Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE)

    D6585 Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape

    D6712 Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes

    D6713 Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF)

    D6778 Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM)

    D6779 Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)

    D6835 Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)

    D6865 Standard Classification System and Basis for Specifications for Acrylonitrile–Styrene–Acrylate (ASA) and Acrylonitrile–EPDM&

    D6867 Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing

    D706 Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds

    D707 Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds

    D7193 Standard Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape

    D7194 Standard Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE)

    D7211 Standard Specification for Parts Machined from Polychlorotrifluoroethylene (PCTFE) and Intended for General Use

    D7292 Standard Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI)

    D7293 Standard Specification for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI)

    D7436 Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology

    D7471 Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials

    D7472 Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials

    D7474 Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents

    D787 Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds

    D788 Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds

    D789 Standard Test Methods for Determination of Solution Viscosities of Polyamide (PA)


    D20.10.24 - Fracture and Fatigue


    D20.10 - Mechanical Properties

    D1043 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test

    D1044 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion

    D1708 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens

    D1822 Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials

    D256 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics

    D2583 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor

    D2990 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics

    D3763 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors

    D4065 Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures

    D4092 Standard Terminology for Plastics: Dynamic Mechanical Properties

    D4093 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials

    D4440 Standard Test Method for Plastics: Dynamic Mechanical Properties Melt Rheology

    D4473 Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior

    D4508 Standard Test Method for Chip Impact Strength of Plastics

    D4812 Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics

    D5023 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)

    D5024 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression

    D5026 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension

    D5045 Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials

    D5083 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens

    D5279 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Torsion

    D5418 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam)

    D5420 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)

    D5592 Standard Guide for Material Properties Needed in Engineering Design Using Plastics

    D5628 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)

    D5947 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens

    D6068 Standard Test Method for Determining J-R Curves of Plastic Materials

    D6110 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics

    D6272 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending

    D638 Standard Test Method for Tensile Properties of Plastics

    D6395 Standard Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics

    D695 Standard Test Method for Compressive Properties of Rigid Plastics

    D7027 Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine

    D7107 Standard Test Method for Creep Measurement of Self-Lubricating Bushings

    D732 Standard Test Method for Shear Strength of Plastics by Punch Tool

    D747 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam

    D7774 Standard Test Method for Flexural Fatigue Properties of Plastics

    D7791 Standard Test Method for Uniaxial Fatigue Properties of Plastics

    D785 Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials

    D790 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials

    D952 Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials

    D953 Standard Test Method for Bearing Strength of Plastics


    D20.09 - Specimen Preparation

    D1896/D1896M Standard Practice for Transfer Molding Test Specimens of Thermosetting Compounds

    D3419 Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds

    D3641 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials

    D4703 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets

    D5224 Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds

    D6289 Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics

    D955 Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics

    D957 Standard Practice for Determining Surface Temperature of Molds for Plastics


    D19.08 - Membranes and Ion Exchange Materials

    D1782 Standard Test Methods for Operating Performance of Particulate Cation-Exchange Materials

    D2187 Standard Test Methods for Physical and Chemical Properties of Particulate Ion-Exchange Resins

    D2687 Standard Practices for Sampling Particulate Ion-Exchange Materials

    D3087 Standard Test Method for Operating Performance of Anion-Exchange Materials for Strong Acid Removal

    D3375 Standard Test Method for Column Capacity of Particulate Mixed Bed Ion Exchange Materials

    D3739 Standard Practice for Calculation and Adjustment of the Langelier Saturation Index for Reverse Osmosis

    D3861 Standard Test Method for Quantity of Water-Extractable Matter in Membrane Filters

    D3862 Standard Test Method for Retention Characteristics of 0.2-µm Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality

    D3863 Standard Test Method for Retention Characteristics of 0.40 to 0.45-μm Membrane Filters Used in Routine Filtration Procedures for the Evaluation of Microbiological Water Quality

    D3923 Standard Practices for Detecting Leaks in Reverse Osmosis and Nanofiltration Devices

    D4189 Standard Test Method for Silt Density Index (SDI) of Water

    D4194 Standard Test Methods for Operating Characteristics of Reverse Osmosis and Nanofiltration Devices

    D4195 Standard Guide for Water Analysis for Reverse Osmosis and Nanofiltration Application

    D4196 Standard Test Method for Confirming the Sterility of Membrane Filters

    D4198 Standard Test Methods for Evaluating Absorbent Pads Used with Membrane Filters for Bacteriological Analysis and Growth

    D4199 Standard Test Methods for Autoclavability of Membrane Filters

    D4200 Standard Test Method for Evaluating Inhibitory Effects of Ink Grids on Membrane Filters

    D4266 Standard Test Methods for Precoat Capacity of Powdered Ion-Exchange Resins

    D4456 Standard Test Methods for Physical and Chemical Properties of Powdered Ion Exchange Resins

    D4472 Standard Guide for Recordkeeping for Reverse Osmosis and Nanofiltration Systems

    D4516 Standard Practice for Standardizing Reverse Osmosis Performance Data

    D4548 Standard Test Method for Anion-Cation Balance of Mixed Bed Ion-Exchange Resins

    D4582 Standard Practice for Calculation and Adjustment of the Stiff and Davis Stability Index for Reverse Osmosis

    D4692 Standard Practice for Calculation and Adjustment of Sulfate Scaling Salts (CaSO4, SrSO4, and BaSO4) for Reverse Osmosis and Nanofiltration

    D4993 Standard Practice for Calculation and Adjustment of Silica (SiO2) Scaling for Reverse Osmosis

    D5042 Standard Test Method for Estimating the Organic Fouling of Particulate Anion Exchange Resins

    D5090 Standard Practice for Standardizing Ultrafiltration Permeate Flow Performance Data

    D5091 Standard Guide for Water Analysis for Electrodialysis/Electrodialysis Reversal Applications

    D5131 Standard Guide for Record Keeping for Electrodialysis/Electrodialysis Reversal Systems

    D5217 Standard Guide for Detection of Fouling and Degradation of Particulate Ion Exchange Materials

    D5615 Standard Test Method for Operating Characteristics of Home Reverse Osmosis Devices

    D5627 Standard Test Method for Water Extractable Residue from Particulate Ion-Exchange Resins

    D6161 Standard Terminology Used for Microfiltration, Ultrafiltration, Nanofiltration and Reverse Osmosis Membrane Processes

    D6302 Standard Practice for Evaluating the Kinetic Behavior of Ion Exchange Resins

    D6529 Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Feeds from 50–1000 μS/cm

    D6807 Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Reverse Osmosis Permeates from2 to 100 S/cm

    D6908 Standard Practice for Integrity Testing of Water Filtration Membrane Systems

    D7285 Standard Guide for Recordkeeping Microfiltration and Ultrafiltration Systems

    D7513 Standard Test Method for Capacity of Mixed Bed Ion Exchange Cartridges

    D7601 Standard Practice for Pressure Driven Membrane Separation Element/Bundle Evaluation

    D7903 Standard Practice for Determining the Capacity of Oxygen Removal Ion Exchange Cartridges

    F316 Standard Test Methods for Pore Size Characteristics of Membrane Filters by Bubble Point and Mean Flow Pore Test


    D19.07 - Sediments, Geomorphology, and Open-Channel Flow

    D1941 Standard Test Method for Open Channel Flow Measurement of Water with the Parshall Flume

    D3858 Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method

    D3974 Standard Practices for Extraction of Trace Elements from Sediments

    D3975 Standard Practice for Development and Use (Preparation) of Samples for Collaborative Testing of Methods for Analysis of Sediments

    D3976 Standard Practice for Preparation of Sediment Samples for Chemical Analysis

    D3977 Standard Test Methods for Determining Sediment Concentration in Water Samples

    D4409 Standard Test Method for Velocity Measurements of Water in Open Channels with Rotating Element Current Meters

    D4410 Terminology for Fluvial Sediment

    D4411 Standard Guide for Sampling Fluvial Sediment in Motion

    D4698 Standard Practice for Total Digestion of Sediment Samples for Chemical Analysis of Various Metals

    D4822 Standard Guide for Selection of Methods of Particle Size Analysis of Fluvial Sediments (Manual Methods)

    D4823 Standard Guide for Core Sampling Submerged, Unconsolidated Sediments

    D5073 Standard Practice for Depth Measurement of Surface Water

    D5074 Standard Practice for Preparation of Natural-Matrix Sediment Reference Samples for Major and Trace Inorganic Constituents Analysis by Partial Extraction Procedures

    D5089 Standard Test Method for Velocity Measurements of Water in Open Channels with Electromagnetic Current Meters

    D5129 Standard Test Method for Open Channel Flow Measurement of Water Indirectly by Using Width Contractions

    D5130 Standard Test Method for Open-Channel Flow Measurement of Water Indirectly by Slope-Area Method

    D5242 Standard Test Method for Open-Channel Flow Measurement of Water with Thin-Plate Weirs

    D5243 Standard Test Method for Open-Channel Flow Measurement of Water Indirectly at Culverts

    D5258 Standard Practice for Acid-Extraction of Elements from Sediments Using Closed Vessel Microwave Heating

    D5387 Standard Guide for Elements of a Complete Data Set for Non-Cohesive Sediments

    D5388 Standard Test Method for Indirect Measurements of Discharge by Step-Backwater Method

    D5389 Standard Test Method for Open-Channel Flow Measurement by Acoustic Velocity Meter Systems

    D5390 Standard Test Method for Open-Channel Flow Measurement of Water with Palmer-Bowlus Flumes

    D5413 Standard Test Methods for Measurement of Water Levels in Open-Water Bodies

    D5541 Standard Practice for Developing a Stage-Discharge Relation for Open Channel Flow

    D5613 Standard Test Method for Open-Channel Measurement of Time of Travel Using Dye Tracers

    D5614 Standard Test Method for Open Channel Flow Measurement of Water with Broad-Crested Weirs

    D5640 Standard Guide for Selection of Weirs and Flumes for Open-Channel Flow Measurement of Water

    D5674 Standard Guide for Operation of a Gaging Station

    D5765 Standard Practice for Solvent Extraction of Total Petroleum Hydrocarbons from Soils and Sediments Using Closed Vessel Microwave Heating

    D5906 Standard Guide for Measuring Horizontal Positioning During Measurements of Surface Water Depths

    D6318 Standard Practice for Calibrating a Fathometer Using a Bar Check Method

    D6326 Standard Practice for The Selection of Maximum Transit-Rate Ratios and Depths for the U.S. Series of Isokinetic Suspended-Sediment Samplers

    D6764 Standard Guide for Collection of Water Temperature, Dissolved-Oxygen Concentrations, Specific Electrical Conductance, and pH Data from Open Channels

    D6855 Standard Test Method for Determination of Turbidity Below 5 NTU in Static Mode

    D7315 Standard Test Method for Determination of Turbidity Above 1 Turbidity Unit (TU) in Static Mode

    D7512 Standard Guide for Monitoring of Suspended-Sediment Concentration in Open Channel Flow Using Optical Instrumentation

    D7726 Standard Guide for The Use of Various Turbidimeter Technologies for Measurement of Turbidity in Water

    D7937 Standard Test Method for In-situ Determination of Turbidity Above 1 Turbidity Unit (TU) in Surface Water

    F660 Standard Practice for Comparing Particle Size in the Use of Alternative Types of Particle Counters


    D19.06 - Methods for Analysis for Organic Substances in Water

    D1252 Standard Test Methods for Chemical Oxygen Demand (Dichromate Oxygen Demand) of Water

    D1783 Standard Test Methods for Phenolic Compounds in Water

    D2036 Standard Test Methods for Cyanides in Water

    D2580 Standard Test Method for Phenols in Water by Gas-Liquid Chromatography

    D2908 Standard Practice for Measuring Volatile Organic Matter in Water by Aqueous-Injection Gas Chromatography

    D3325 Standard Practice for Preservation of Waterborne Oil Samples

    D3326 Standard Practice for Preparation of Samples for Identification of Waterborne Oils

    D3328 Standard Test Methods for Comparison of Waterborne Petroleum Oils by Gas Chromatography

    D3414 Standard Test Method for Comparison of Waterborne Petroleum Oils by Infrared Spectroscopy

    D3415 Standard Practice for Identificaiton of Waterborne Oils

    D3650 Standard Test Method for Comparison of Waterborne Petroleum Oils By Fluorescence Analysis

    D3694 Standard Practices for Preparation of Sample Containers and for Preservation of Organic Constituents

    D3695 Standard Test Method for Volatile Alcohols in Water by Direct Aqueous-Injection Gas Chromatography

    D3871 Standard Test Method for Purgeable Organic Compounds in Water Using Headspace Sampling

    D3973 Standard Test Method for Low-Molecular Weight Halogenated Hydrocarbons in Water

    D4128 Standard Guide for Identification and Quantitation of Organic Compounds in Water by Combined Gas Chromatography and Electron Impact Mass Spectrometry

    D4129 Standard Test Method for Total and Organic Carbon in Water by High Temperature Oxidation and by Coulometric Detection

    D4165 Standard Test Method for Cyanogen Chloride in Water 

    D4193 Standard Test Method for Thiocyanate in Water

    D4282 Standard Test Method for Determination of Free Cyanide in Water and Wastewater by Microdiffusion

    D4489 Standard Practices for Sampling of Waterborne Oils

    D4763 Standard Practice for Identification of Chemicals in Water by Fluorescence Spectroscopy

    D4839 Standard Test Method for Total Carbon and Organic Carbon in Water by Ultraviolet, or Persulfate Oxidation, or Both, and Infrared Detection

    D5175 Standard Test Method for Organohalide Pesticides and Polychlorinated Biphenyls in Water by Microextraction and Gas Chromatography

    D5176 Standard Test Method for Total Chemically Bound Nitrogen in Water by Pyrolysis and Chemiluminescence Detection

    D5241 Standard Practice for Micro-Extraction of Water for Analysis of Volatile and Semi-Volatile Organic Compounds in Water

    D5315 Standard Test Method for Determination of N-Methyl-Carbamoyloximes and N-Methylcarbamates in Water by Direct Aqueous Injection HPLC with Post-Column Derivatization

    D5316 Standard Test Method for 1,2-Dibromoethane and 1,2-Dibromo-3-Chloropropane in Water by Microextraction and Gas Chromatography

    D5317 Standard Test Method for Determination of Chlorinated Organic Acid Compounds in Water by Gas Chromatography with an Electron Capture Detector

    D5412 Standard Test Method for Quantification of Complex Polycyclic Aromatic Hydrocarbon Mixtures or Petroleum Oils in Water

    D5739 Standard Practice for Oil Spill Source Identification by Gas Chromatography and Positive Ion Electron Impact Low Resolution Mass Spectrometry

    D5788 Standard Guide for Spiking Organics into Aqueous Samples

    D5790 Standard Test Method for Measurement of Purgeable Organic Compounds in Water by Capillary Column Gas Chromatography/Mass Spectrometry

    D5904 Standard Test Method for Total Carbon, Inorganic Carbon, and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection

    D6104 Standard Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off

    D6157 Standard Practice for Determining the Performance of Oil/Water Separators Subjected to a Sudden Release

    D6238 Standard Test Method for Total Oxygen Demand in Water

    D6520 Standard Practice for the Solid Phase Micro Extraction (SPME) of Water and its Headspace for the Analysis of Volatile and Semi-Volatile Organic Compounds

    D6696 Standard Guide for Understanding Cyanide Species

    D6888 Standard Test Method for Available Cyanide with Ligand Displacement and Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection

    D6889 Standard Practice for Fast Screening for Volatile Organic Compounds in Water Using Solid Phase Microextraction (SPME)

    D7065 Standard Test Method for Determination of Nonylphenol, Bisphenol A, p-tert -Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Gas Chromatography Mass Spectrometry

    D7066 Standard Test Method for dimer/trimer of chlorotrifluoroethylene (S-316) Recoverable Oil and Grease and Nonpolar Material by Infrared Determination

    D7237 Standard Test Method for Free Cyanide with Flow Injection Analysis (FIA) Utilizing Gas Diffusion Separation and Amperometric Detection

    D7284 Standard Test Method for Total Cyanide in Water by Micro Distillation followed by Flow Injection Analysis with Gas Diffusion Separation and Amperometric Detection

    D7363 Standard Test Method for Determination of Parent and Alkyl Polycyclic Aromatics in Sediment Pore Water Using Solid-Phase Microextraction and Gas Chromatography/Mass Spectrometry in Selected Ion Monitoring Mode

    D7365 Standard Practice for Sampling, Preservation and Mitigating Interferences in Water Samples for Analysis of Cyanide

    D7485 Standard Test Method for Determination of Nonylphenol, p-tert-Octylphenol, Nonylphenol Monoethoxylate and Nonylphenol Diethoxylate in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry

    D7511 Standard Test Method for Total Cyanide by Segmented Flow Injection Analysis, In-Line Ultraviolet Digestion and Amperometric Detection

    D7572 Standard Guide for Recovery of Aqueous Cyanides by Extraction from Mine Rock and Soil

    D7573 Standard Test Method for Total Carbon and Organic Carbon in Water by High Temperature Catalytic Combustion and Infrared Detection

    D7574 Standard Test Method for Determination of Bisphenol A in Environmental Waters by Liquid Chromatography/Tandem Mass Spectrometry

    D7575 Standard Test Method for Solvent-Free Membrane Recoverable Oil and Grease by Infrared Determination

    D7597 Standard Test Method for Determination of Diisopropyl Methylphosphonate, Ethyl Hydrogen Dimethylamidophosphate, Ethyl Methylphosphonic Acid, Isopropyl Methylphosphonic Acid, Methylphosphonic Acid and Pinacolyl Methylphosphonic Acid in Water by Liquid Chro

    D7598 Standard Test Method for Determination of Thiodiglycol in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Spectrometry

    D7599 Standard Test Method for Determination of Diethanolamine, Triethanolamine, N-Methyldiethanolamine and N-Ethyldiethanolamine in Water by Single Reaction Monitoring Liquid Chromatography/Tandem Mass Sp

    D7600 Standard Test Method for Determination of Aldicarb, Carbofuran, Oxamyl and Methomyl by Liquid Chromatography/Tandem Mass Spectrometry

    D7644 Standard Test Method for Determination of Bromadiolone, Brodifacoum, Diphacinone and Warfarin in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)

    D7645 Standard Test Method for Determination of Aldicarb, Aldicarb Sulfone, Aldicarb Sulfoxide, Carbofuran, Methomyl, Oxamyl, and Thiofanox in Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)

    D7678 Standard Test Method for Total Petroleum Hydrocarbons (TPH) in Water and Wastewater with Solvent Extraction using Mid-IR Laser Spectroscopy

    D7728 Standard Guide for Selection of ASTM Analytical Methods for Implementation of International Cyanide Management Code Guidance

    D7730 Standard Test Method for Determination of Dioctyl Sulfosuccinate in Sea Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)

    D7731 Standard Test Method for Determination of Dipropylene Glycol Monobutyl Ether and Ethylene Glycol Monobutyl Ether in Sea Water by Liquid Chromatography/Tandem Mass Spectrometry (LC/MS/MS)

    D7742 Standard Practice for Determination of Nonylphenol Polyethoxylates (NPnEO, 3 ≤ n ≤ 18) and Octylphenol Polyethoxylates (OPnEO, 2 ≤ n ≤ n ≤ 12 in Water by Single Reaction Monitoring (SRM) Liquid Chromatography/ Tandem Mass Spe

    D7979 Standard Test Method for Determination of Perfluorinated Compounds in Water, Sludge, Influent, Effluent and Wastewater by Liquid Chromatography Tandem Mass Spectrometry (LC/MS/MS)


    D19.05 - Inorganic Constituents in Water

    D1067 Standard Test Methods for Acidity or Alkalinity of Water

    D1068 Standard Test Methods for Iron in Water

    D1126 Standard Test Method for Hardness in Water

    D1179 Standard Test Methods for Fluoride Ion in Water

    D1246 Standard Test Method for Bromide Ion in Water

    D1253 Standard Test Method for Residual Chlorine in Water

    D1292 Standard Test Method for Odor in Water

    D1426 Standard Test Methods for Ammonia Nitrogen In Water

    D1429 Standard Test Methods for Specific Gravity of Water and Brine

    D1687 Standard Test Methods for Chromium in Water

    D1688 Standard Test Methods for Copper in Water

    D1691 Standard Test Methods for Zinc in Water

    D1886 Standard Test Methods for Nickel in Water

    D1971 Standard Practices for Digestion of Water Samples for Determination of Metals by Flame Atomic Absorption, Graphite Furnace Atomic Absorption, Plasma Emission Spectroscopy, or Plasma Mass Spectrometry

    D1976 Standard Test Method for Elements in Water by Inductively-Coupled Argon Plasma Atomic Emission Spectroscopy

    D2972 Standard Test Methods for Arsenic in Water

    D3082 Standard Test Method for Boron in Water

    D3223 Standard Test Method for Total Mercury in Water

    D3352 Standard Test Method for Strontium Ion in Brackish Water, Seawater, and Brines

    D3372 Standard Test Method for Molybdenum in Water

    D3373 Standard Test Method for Vanadium in Water

    D3557 Standard Test Methods for Cadmium in Water

    D3558 Standard Test Methods for Cobalt in Water

    D3559 Standard Test Methods for Lead in Water

    D3561 Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry

    D3590 Standard Test Methods for Total Kjeldahl Nitrogen in Water

    D3645 Standard Test Methods for Beryllium in Water

    D3651 Standard Test Method for Barium in Brackish Water, Seawater, and Brines

    D3697 Standard Test Method for Antimony in Water

    D3859 Standard Test Methods for Selenium in Water

    D3866 Standard Test Methods for Silver in Water

    D3867 Standard Test Methods for Nitrite-Nitrate in Water

    D3868 Standard Test Method for Fluoride Ions in Brackish Water, Seawater, and Brines

    D3869 Standard Test Methods for Iodide and Bromide Ions in Brackish Water, Seawater, and Brines

    D3875 Standard Test Method for Alkalinity in Brackish Water, Seawater, and Brines

    D3919 Standard Practice for Measuring Trace Elements in Water by Graphite Furnace Atomic Absorption Spectrophotometry

    D3920 Standard Test Method for Strontium in Water

    D3986 Standard Test Method for Barium in Brines, Seawater, and Brackish Water by Direct-Current Argon Plasma Atomic Emission Spectroscopy

    D4025 Standard Practice for Reporting Results of Examination and Analysis of Deposits Formed from Water for Subsurface Injection

    D4127 Standard Terminology Used with Ion-Selective Electrodes

    D4130 Standard Test Method for Sulfate Ion in Brackish Water, Seawater, and Brines

    D4190 Standard Test Method for Elements in Water by Direct-Current Argon Plasma Atomic Emission Spectroscopy

    D4191 Standard Test Method for Sodium in Water by Atomic Absorption Spectrophotometry

    D4192 Standard Test Method for Potassium in Water by Atomic Absorption Spectrophotometry

    D4309 Standard Practice for Sample Digestion Using Closed Vessel Microwave Heating Technique for the Determination of Total Metals in Water

    D4327 Standard Test Method for Anions in Water by Suppressed Ion Chromatography

    D4328 Standard Practice for Calculation of Supersaturation of Barium Sulfate, Strontium Sulfate, and Calcium Sulfate Dihydrate (Gypsum) in Brackish Water, Seawater, and Brines

    D4382 Standard Test Method for Barium in Water, Atomic Absorption Spectrophotometry, Graphite Furnace

    D4458 Standard Test Method for Chloride Ions in Brackish Water, Seawater, and Brines

    D4520 Standard Practice for Determining Water Injectivity Through the Use of On-Site Floods

    D4638 Standard Guide for Preparation of Biological Samples for Inorganic Chemical Analysis

    D4658 Standard Test Method for Sulfide Ion in Water

    D4691 Standard Practice for Measuring Elements in Water by Flame Atomic Absorption Spectrophotometry

    D511 Standard Test Methods for Calcium and Magnesium In Water

    D512 Standard Test Methods for Chloride Ion In Water

    D513 Standard Test Methods for Total and Dissolved Carbon Dioxide in Water

    D516 Standard Test Method for Sulfate Ion in Water

    D5257 Standard Test Method for Dissolved Hexavalent Chromium in Water by Ion Chromatography

    D5463 Standard Guide for Use of Test Kits to Measure Inorganic Constituents in Water

    D5673 Standard Test Method for Elements in Water by Inductively Coupled Plasma-Mass Spectrometry

    D5907 Standard Test Methods for Filterable Matter (Total Dissolved Solids) and Nonfilterable Matter (Total Suspended Solids) in Water

    D6501 Standard Test Method for Phosphonate in Brines

    D6508 Standard Test Method for Determination of Dissolved Inorganic Anions in Aqueous Matrices Using Capillary Ion Electrophoresis and Chromate Electrolyte

    D6581 Standard Test Methods for Bromate, Bromide, Chlorate, and Chlorite in Drinking Water by Suppressed Ion Chromatography

    D6800 Standard Practice for Preparation of Water Samples Using Reductive Precipitation Preconcentration Technique for ICP-MS Analysis of Trace Metals

    D6850 Standard Guide for QC of Screening Methods in Water

    D6919 Standard Test Method for Determination of Dissolved Alkali and Alkaline Earth Cations and Ammonium in Water and Wastewater by Ion Chromatography

    D6994 Standard Test Method for Determination of Metal Cyanide Complexes in Wastewater, Surface Water, Groundwater and Drinking Water Using Anion Exchange Chromatography with UV Detection

    D7781 Standard Test Method for Nitrite-Nitrate in Water by Nitrate Reductase

    D7980 Standard Guide for Ion-Chromatographic Analysis of Anions in Grab Samples of Ultrapure Water (UPW) in the Semiconductor Industry

    D857 Standard Test Method for Aluminum in Water

    D858 Standard Test Methods for Manganese in Water

    D859 Standard Test Method for Silica in Water

    D888 Standard Test Methods for Dissolved Oxygen in Water


    D19.04 - Methods of Radiochemical Analysis

    D1890 Standard Test Method for Beta Particle Radioactivity of Water 

    D1943 Standard Test Method for Alpha Particle Radioactivity of Water 

    D2460 Standard Test Method for Alpha-Particle-Emitting Isotopes of Radium in Water

    D3084 Standard Practice for Alpha-Particle Spectrometry of Water

    D3454 Standard Test Method for Radium-226 in Water

    D3648 Standard Practices for the Measurement of Radioactivity

    D3649 Standard Practice for High-Resolution Gamma-Ray Spectrometry of Water

    D3865 Standard Test Method for Plutonium in Water

    D3972 Standard Test Method for Isotopic Uranium in Water by Radiochemistry

    D4107 Standard Test Method for Tritium in Drinking Water

    D4785 Standard Test Method for Low-Level Analysis of Iodine Radioisotopes in Water

    D4922 Standard Test Method for Determination of Radioactive Iron in Water

    D4962 Standard Practice for NaI(Tl) Gamma-Ray Spectrometry of Water

    D5072 Standard Test Method for Radon in Drinking Water

    D5174 Standard Test Method for Trace Uranium in Water by Pulsed-Laser Phosphorimetry

    D5411 Standard Practice for Calculation of Average Energy Per Disintegration (E) for a Mixture of Radionuclides in Reactor Coolant

    D5811 Standard Test Method for Strontium-90 in Water

    D6239 Standard Test Method for Uranium in Drinking Water by High-Resolution Alpha-Liquid-Scintillation Spectrometry

    D7168 Standard Test Method for 99Tc in Water by Solid Phase Extraction Disk

    D7282 Standard Practice for Set-up, Calibration, and Quality Control of Instruments Used for Radioactivity Measurements

    D7283 Standard Test Method for Alpha and Beta Activity in Water By Liquid Scintillation Counting

    D7316 Standard Guide for Interpretation of Existing Field Instrumentation to Influence Emergency Response Decisions

    D7362 Standard Guide for Rapid Screening of Vegetation for Radioactive Strontium Aerial Deposition

    D7535 Standard Test Method for Lead-210 in Water

    D7727 Standard Practice for Calculation of Dose Equivalent Xenon (DEX) for Radioactive Xenon Fission Products in Reactor Coolant

    D7784 Standard Practice for the Rapid Assessment of Gamma-ray Emitting Radionuclides in Environmental Media by Gamma Spectrometry

    D7902 Standard Terminology for Radiochemical Analyses

    D7939 Standard Test Method for Rapid Radiochemical Determination of Americium-241 in Water


    D19.03 - Sampling Water and Water-Formed Deposits, Analysis of Water for Power Generation and Process Use, On-Line Water Analysis, and Surveillance of Water

    D1066 Standard Practice for Sampling Steam

    D1125 Standard Test Methods for Electrical Conductivity and Resistivity of Water

    D1245 Standard Practice for Examination of Water-Formed Deposits by Chemical Microscopy

    D1291 Standard Practice for Estimation of Chlorine Demand of Water

    D1293 Standard Test Methods for pH of Water

    D1385 Standard Test Method for Hydrazine in Water

    D1498 Standard Test Method for Oxidation-Reduction Potential of Water

    D2035 Standard Practice for Coagulation-Flocculation Jar Test of Water

    D2331 Standard Practices for Preparation and Preliminary Testing of Water-Formed Deposits

    D2332 Standard Practice for Analysis of Water-Formed Deposits by Wavelength-Dispersive X-Ray Fluorescence

    D2688 Standard Test Method for Corrosivity of Water in the Absence of Heat Transfer (Weight Loss Method)

    D2791 Standard Test Method for On-line Determination of Sodium in Water

    D3370 Standard Practices for Sampling Water from Closed Conduits

    D3483 Standard Test Methods for Accumulated Deposition in a Steam Generator Tube

    D3864 Standard Guide for On-Line Monitoring Systems for Water Analysis

    D4188 Standard Practice for Performing Pressure In-Line Coagulation-Flocculation-Filtration Test in Water

    D4453 Standard Practice for Handling of High Purity Water Samples

    D4517 Standard Test Method for Low-Level Total Silica in High-Purity Water by Flameless Atomic Absorption Spectroscopy

    D4519 Standard Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by Cation Exchange and Degassed Cation Conductivity

    D4778 Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions

    D5128 Standard Test Method for On-Line pH Measurement of Water of Low Conductivity

    D5173 Standard Guide for On-Line Monitoring of Total Organic Carbon in Water by Oxidation and Detection of Resulting Carbon Dioxide

    D5256 Standard Test Method for Relative Efficacy of Dynamic Solvent Systems for Dissolving Water-Formed Deposits

    D5391 Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample

    D5462 Standard Test Method for On-Line Measurement of Low-Level Dissolved Oxygen in Water

    D5464 Standard Test Method for pH Measurement of Water of Low Conductivity

    D5540 Standard Practice for Flow Control and Temperature Control for On-Line Water Sampling and Analysis

    D5542 Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography

    D5543 Standard Test Methods for Low-Level Dissolved Oxygen in Water

    D5544 Standard Test Method for On-Line Measurement of Residue After Evaporation of High-Purity Water

    D5996 Standard Test Method for Measuring Anionic Contaminants in High-Purity Water by On-Line Ion Chromatography

    D5997 Standard Test Method for On-Line Monitoring of Total Carbon, Inorganic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection

    D6071 Standard Test Method for Low Level Sodium in High Purity Water by Graphite Furnace Atomic Absorption Spectroscopy

    D6301 Standard Practice for Collection of On-Line Composite Samples of Suspended Solids and Ionic Solids in Process Water

    D6317 Standard Test Method for Low Level Determination of Total Carbon, Inorganic Carbon and Organic Carbon in Water by Ultraviolet, Persulfate Oxidation, and Membrane Conductivity Detection

    D6502 Standard Test Method for Measurement of On-line Integrated Samples of Low Level Suspended Solids and Ionic Solids in Process Water by X-Ray Fluorescence (XRF)

    D6504 Standard Practice for On-Line Determination of Cation Conductivity in High Purity Water

    D6569 Standard Test Method for On-Line Measurement of pH

    D6698 Standard Test Method for On-Line Measurement of Turbidity Below 5 NTU in Water

    D7126 Standard Test Method for On-Line Colorimetric Measurement of Silica

    D7677 Standard Test Method for the Continuous Measurement of Dissolved Ozone in Low Conductivity Water

    D7725 Standard Test Method for the Continuous Measurement of Turbidity Above 1 Turbidity Unit (TU)

    D807 Standard Practice for Assessing the Tendency of Industrial Boiler Waters to Cause Embrittlement (USBM Embrittlement Detector Method)

    D887 Standard Practices for Sampling Water-Formed Deposits

    D933 Standard Practice for Reporting Results of Examination and Analysis of Water-Formed Deposits

    D934 Standard Practices for Identification of Crystalline Compounds in Water-Formed Deposits By X-Ray Diffraction


    D16.07 - Styrene, Ethylbenzene and C9 and C10 Aromatic Hydrocarbons

    D2119 Standard Test Method for Aldehydes in Styrene Monomer

    D2121 Standard Test Methods for Polymer Content of Styrene Monomer

    D2232 Test Method for Evaporation Residue of Naphthalene

    D2340 Standard Test Method for Peroxides in Styrene Monomer

    D2827 Standard Specification for Styrene Monomer

    D3160 Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (alpha-Methylstyrene)

    D3193 Standard Specification for Ethylbenzene

    D3760 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography

    D4077 Standard Specification for Cumene (Isopropylbenzene)

    D4590 Standard Test Method for Colorimetric Determination of p-tert-Butylcatechol In Styrene Monomer or AMS (α–Methylstyrene) by Spectrophotometry

    D5060 Standard Test Method for Determining Impurities in High-Purity Ethylbenzene by Gas Chromatography

    D5135 Standard Test Method for Analysis of Styrene by Capillary Gas Chromatography

    D6144 Standard Test Method for Analysis of AMS (α-Methylstyrene) by Capillary Gas Chromatography

    D6367 Standard Specification for AMS (α-Methylstyrene)

    D7057 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (External Standard)

    D7125 Standard Specification for Cumene (Isopropylbenzene) Manufactured Via a Zeolite Process

    D7704 Standard Test Method for Total Aldehydes in Styrene Monomer by Potentiometric Titration

    D7977 Standard Test Methods for Polymer Content of AMS (α-Methylstyrene)


    D16.06 - Statistics and Quality

    D6809 Standard Guide for Quality Control and Quality Assurance Procedures for Aromatic Hydrocarbons and Related Materials


    D16.05 - Editorial and Nomenclature

    D4790 Standard Terminology of Aromatic Hydrocarbons and Related Chemicals


    D16.04 - Instrumental Analysis

    D1492 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration

    D3505 Standard Test Method for Density or Relative Density of Pure Liquid Chemicals

    D4735 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography

    D5194 Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons

    D5386 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry

    D5776 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration

    D5808 Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry

    D6875 Standard Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor

    D7011 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection

    D7183 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence

    D7184 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection

    D7359 Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)

    D7375 Standard Test Method for Trace Quantities of Water in Aromatic Hydrocarbons and Their Mixtures by Coulometric Karl Fischer Titration

    D7457 Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry

    D7536 Standard Test Method for Chlorine in Aromatics by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry

    D850 Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials


    D16.02 - Oxygenated Aromatics

    D1631 Standard Test Method for Water in Phenol and Related Materials by the Iodine Reagent Method

    D1686 Standard Test Method for Color of Solid Aromatic Hydrocarbons and Related Materials in the Molten State (Platinum-Cobalt Scale)

    D2439 Standard Specification for Refined Phenol

    D4471 Standard Test Method for Pyridine Bases in Cresylic Acid by Direct Titration

    D4493 Standard Test Method for Solidification Point of Bisphenol A (4,4`-Isopropylidenediphenol)

    D4789 Standard Test Method for Solution Color of Bisphenol A (4,4`-Isopropylidenediphenol)

    D5310 Standard Test Method for Tar Acid Composition by Capillary Gas Chromatography

    D6142 Standard Test Method for Analysis of Phenol by Capillary Gas Chromatography

    D6143 Standard Test Method for Iron Content of Bisphenol A (4,4 - Isopropylidenediphenol)

    D7881 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Reverse Voltage Mode

    D7882 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Capillary Electrophoresis with Normal Voltage Mode

    D7883 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Weak Anion Exchange High Performance Liquid Chromatography

    D7884 Standard Test Method for Determination of 4-Carboxybenzaldehyde and p-Toluic Acid in Purified Terephthalic Acid by Reverse Phase High Performance Liquid Chromatography

    D7976 Standard Specification for Purified Terephthalic Acid (PTA)


    D16.01 - Benzene, Toluene, Xylenes, Cyclohexane and Their Derivatives

    D1555 Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane

    D1555M Standard Test Method for Calculation of Volume and Weight of Industrial Aromatic Hydrocarbons and Cyclohexane [Metric]

    D2359 Standard Specification for Refined Benzene-535

    D2360 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography

    D4492 Standard Test Method for Analysis of Benzene by Gas Chromatography

    D4734 Standard Specification for Refined Benzene-545

    D5136 Standard Specification for High Purity p-Xylene

    D5211 Standard Specification for Xylenes for p-Xylene Feedstock

    D5309 Standard Specification for Cyclohexane 999

    D5471 Standard Specification for O-Xylene 980

    D5606 Standard Specification for Toluene for Toluene Diisocyanate (TDI) Feedstock

    D5713 Standard Test Method for Analysis of High Purity Benzene for Cyclohexane Feedstock by Capillary Gas Chromatography

    D5871 Standard Specification for Benzene for Cyclohexane Feedstock

    D5917 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and External Calibration

    D6526 Standard Test Method for Analysis of Toluene by Capillary Column Gas Chromatography

    D6563 Standard Test Method for Benzene, Toluene, Xylene (BTX) Concentrates Analysis by Gas Chromatography

    D7124 Standard Specification for Benzene for Use with Zeolite Based Catalysts

    D7185 Standard Specification for Low Toluene Low Dioxane (LTLD) Benzene

    D7266 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (External Standard)

    D7360 Standard Test Method for Analysis of Benzene by Gas Chromatography with External Calibration

    D7504 Standard Test Method for Trace Impurities in Monocyclic Aromatic Hydrocarbons by Gas Chromatography and Effective Carbon Number

    D7871 Standard Test Method for Analysis of Cyclohexane by Gas Chromatography (Effective Carbon Number)

    D7951 Standard Specification for Disproportionation (TDP) Toluene

    D841 Standard Specification for Nitration Grade Toluene

    D843 Standard Specification for Nitration Grade Xylene

    D847 Standard Test Method for Acidity of Benzene, Toluene, Xylenes, Solvent Naphthas, and Similar Industrial Aromatic Hydrocarbons

    D848 Standard Test Method for Acid Wash Color of Industrial Aromatic Hydrocarbons

    D849 Standard Test Method for Copper Strip Corrosion by Industrial Aromatic Hydrocarbons

    D852 Standard Test Method for Solidification Point of Benzene


    D15.07 - Specifications

    D3306 Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service

    D4985 Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)

    D5752 Standard Specification for Supplemental Coolant Additives (SCAs) for Use in Precharging Coolants for Heavy-Duty Engines

    D6107 Standard Specification for Stop-Leak Additive for Engine Coolants Used in Light Duty Service

    D6210 Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines

    D7388 Standard Specification for Engine Coolant Grade 1,3-Propanediol (PDO)

    D7515 Standard Test Method for Purity of 1,3-Propanediol (Gas Chromatographic Method)

    D7517 Standard Specification for Fully-Formulated 1,3 Propanediol (PDO) Base Engine Coolant for Heavy-Duty Engines

    D7518 Standard Specification for 1,3 Propanediol (PDO) Base Engine Coolant for Automobile and Light-Duty Service

    D7640 Standard Specification for Engine Coolant Grade Glycerin

    D7714 Standard Specification for Glycerin Base Engine Coolant for Automobile and Light-Duty Service

    E1177 Standard Specification for Engine Coolant Grade Glycol


    D15.06 - Glassware Performance Tests

    D1176 Standard Practice for Sampling and Preparing Aqueous Solutions of Engine Coolants or Antirusts for Testing Purposes

    D1384 Standard Test Method for Corrosion Test for Engine Coolants in Glassware

    D1881 Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware

    D4340 Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions

    D4921 Standard Test Method for Foaming Tendencies of Engine Coolants at Room Temperature

    D6208 Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement

    D7437 Standard Test Method for Temperature and Hard Water Stability of Engine Coolants


    D15.04 - Chemical Properties

    D1119 Standard Test Method for Percent Ash Content of Engine Coolants

    D1121 Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts

    D1123 Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method

    D1287 Standard Test Method for pH of Engine Coolants and Antirusts

    D3634 Standard Test Method for Trace Chloride Ion in Engine Coolants

    D5827 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography

    D6129 Standard Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy

    D6130 Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy

    D7304 Standard Test Method for Determination of Denatonium Ion in Engine Coolant by HPLC

    D7736 Standard Test Method for Determination of Acids and Glycol Esters in Ethylene Glycol


    D15.03 - Physical Properties

    D1120 Standard Test Method for Boiling Point of Engine Coolants

    D1122 Standard Test Method for Density or Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer

    D1177 Standard Test Method for Freezing Point of Aqueous Engine Coolants

    D1882 Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles

    D3321 Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants

    D5931 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter

    D6660 Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method


    D14.80 - Metal Bonding Adhesives

    D1002 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)

    D1062 Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds

    D1151 Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds

    D1183 Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions

    D1184 Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies

    D1304 Standard Test Methods for Adhesives Relative to Their Use as Electrical Insulation

    D1780 Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives

    D1781 Standard Test Method for Climbing Drum Peel for Adhesives

    D1876 Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)

    D1879 Standard Practice for Exposure of Adhesive Specimens to Ionizing Radiation

    D2094 Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests

    D2095 Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens

    D2293 Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal)

    D2294 Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)

    D2295 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)

    D2557 Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from -267.8 to -55°C (-450 to -67°F)

    D2651 Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding

    D2674 Standard Methods of Analysis of Sulfochromate Etch Solution Used in Surface Preparation of Aluminum

    D2739 Standard Test Method for Volume Resistivity of Conductive Adhesives

    D2918 Standard Test Method for Durability Assessment of Adhesive Joints Stressed in Peel

    D2919 Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading

    D3165 Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies

    D3166 Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)

    D3167 Standard Test Method for Floating Roller Peel Resistance of Adhesives

    D3310 Standard Test Method for Determining Corrosivity of Adhesive Materials

    D3433 Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints

    D3482 Standard Practice for Determining Electrolytic Corrosion of Copper by Adhesives

    D3528 Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading

    D3658 Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints

    D3762 Standard Test Method for Adhesive-Bonded Surface Durability of Aluminum (Wedge Test)

    D3933 Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing)

    D4896 Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results

    D5656 Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading

    D5657 Standard Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners

    D6396 Standard Test Method for Testing of Pipe Thread Sealants on Pipe Tees

    D6411/D6411M Standard Specification For Silicone Rubber Room Temperature Vulcanizing Low Outgassing Materials

    D6412/D6412M Standard Specification For Epoxy (Flexible) Adhesive For Bonding Metallic And Nonmetallic Materials

    D896 Standard Practice for Resistance of Adhesive Bonds to Chemical Reagents

    D897 Standard Test Method for Tensile Properties of Adhesive Bonds

    D903 Standard Test Method for Peel or Stripping Strength of Adhesive Bonds

    D950 Standard Test Method for Impact Strength of Adhesive Bonds


    D14.70 - Construction Adhesives

    C557 Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing

    D1779 Standard Specification for Adhesive for Acoustical Materials

    D1995 Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives)

    D3498 Standard Specification for Adhesives for Field-Gluing Plywood to Lumber Framing for Floor Systems

    D3632 Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method

    D3930 Standard Specification for Adhesives for Wood-Based Materials for Construction of Manufactured Homes

    D3931 Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading

    D3983 Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen

    D4027 Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test

    D4502 Standard Test Method for Heat and Moisture Resistance of Wood-Adhesive Joints

    D5215 Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives

    D5574 Standard Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints

    D6004 Standard Test Method for Determining Adhesive Shear Strength of Carpet Adhesives

    D6005 Standard Test Method for Determining Slump Resistance of Carpet Adhesives

    D6325 Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives

    D6464 Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing

    D7446 Standard Specification for Structural Insulated Panel (SIP) Adhesives for Laminating Oriented Strand Board (OSB) to Rigid Cellular Polystryene Thermal Insulation Core Materials

    D7799 Standard Specification for Tufted and Woven Broadloom Carpet Adhesives Without Homogenous PVC or Non-PVC Backings


    D14.60 - Adhesive Material Classification System

    D2851 Standard Specification for Liquid Optical Adhesive

    D4562 Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen

    D4800 Standard Guide for Classifying and Specifying Adhesives

    D5363 Standard Specification for Anaerobic Single-Component Adhesives (AN)

    D5648 Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity)

    D5649 Standard Test Method for Torque Strength of Adhesives Used on Threaded Fasteners

    D6465 Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants

    D7447 Standard Practice for Symbolizing Adhesive Applications


    D14.50 - Hot Melt Pressure Sensitive Archive Adhesives (Disbanded 08/2014)


    D14.30 - Wood Adhesives

    D1101 Standard Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use

    D1488 Standard Test Method for Amylaceous Matter in Adhesives

    D1490 Standard Test Method for Nonvolatile Content of Urea-Formaldehyde Resin Solutions

    D1579 Standard Test Method for Filler Content of Phenol, Resorcinol, and Melamine Adhesives

    D1582 Standard Test Method for Nonvolatile Content of Liquid Phenol, Resorcinol, and Melamine Adhesives

    D1583 Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films

    D2339 Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading

    D2559 Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions

    D3434 Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives

    D3535 Standard Test Method for Resistance to Creep Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior Exposure Conditions

    D4300 Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi

    D4317 Standard Specification for Polyvinyl Acetate-Based Emulsion Adhesives

    D4426 Standard Test Method for Determination of Percent Nonvolatile Content of Liquid Phenolic Resins Used for Wood Laminating

    D4680 Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)

    D4688/D4688M Standard Test Method for Evaluating Structural Adhesives for Finger Jointing Lumber

    D4689 Standard Specification for Adhesive, Casein-Type

    D4690 Standard Specification for Urea-Formaldehyde Resin Adhesives

    D4783 Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi

    D5266 Standard Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints

    D5572 Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products

    D5751 Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products

    D5824 Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water

    D7247 Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures

    D7966/D7966M Standard Test Method for Resistance to Creep of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)

    D905 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading

    D906 Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading


    D14.10 - Working Properties

    D1084 Standard Test Methods for Viscosity of Adhesives

    D1144 Standard Practice for Determining Strength Development of Adhesive Bonds

    D1146 Standard Test Method for Blocking Point of Potentially Adhesive Layers

    D1337 Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength

    D1338 Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength

    D1489 Standard Test Method for Nonvolatile Content of Aqueous Adhesives

    D1875 Standard Test Method for Density of Adhesives in Fluid Form

    D2556 Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties Using Rotational Viscometry

    D4338 Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend

    D4339 Standard Test Method for Determination of the Odor of Adhesives

    D5040 Standard Test Methods for Ash Content of Adhesives

    D5113 Standard Test Method for Determining Adhesive Attack on Rigid Cellular Foam

    D5267 Standard Test Method for Determination of Extrudability of Cartridge Adhesives

    D6862 Standard Test Method for 90 Degree Peel Resistance of Adhesives

    D7149 Standard Practice for Determining the Freeze Thaw Stability of Adhesives

    D7532 Standard Practice for Determination of Re-tack Ability of Carpet Adhesives

    D7888 Standard Practice for Evaluating Adhesive and the Effects of Plasticizer Found Within Polyvinyl Chloride-Backed Floor Coverings

    D899 Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive


    D12.16 - Hard Surface Cleaning

    D1280 Standard Guide for Total Immersion Corrosion Test for Soak Tank Metal Cleaners

    D3556 Standard Guide for Deposition on Glassware During Mechanical Dishwashing

    D4009 Standard Guide for Foam Stability of Hand Dishwashing Detergents

    D5343 Standard Guide for Evaluating Cleaning Performance of Ceramic Tile Cleaners

    D7225 Standard Guide for Blood Cleaning Efficiency of Detergents and Washer-Disinfectors


    D12.15 - Physical Testing

    D1172 Standard Guide for pH of Aqueous Solutions of Soaps and Detergents

    D1173 Standard Test Method for Foaming Properties of Surface-Active Agents

    D2024 Standard Test Method for Cloud Point of Nonionic Surfactants

    D2281 Standard Test Method for Evaluation of Wetting Agents by the Skein Test

    D3050 Standard Guide for Measuring Soil Removal from Artificially Soiled Fabrics (Not Suitable for Detergent Ranking)

    D4008 Standard Test Method for Measuring Anti-Soil Deposition Properties of Laundry Detergents (Not Suitable for Detergent Ranking)

    D4265 Standard Guide for Evaluating Stain Removal Performance in Home Laundering


    D12.12 - Analysis and Specifications of Soaps, Synthetics, Detergents and their Components

    D1568 Standard Test Methods for Sampling and Chemical Analysis of Alkylbenzene Sulfonates

    D1569 Standard Test Methods for Detergent Alkylate

    D1570 Standard Test Methods for Sampling and Chemical Analysis of Fatty Alkyl Sulfates

    D1681 Standard Test Method for Synthetic Anionic Active Ingredient in Detergents by Cationic Titration Procedure

    D1767 Standard Test Method for Ethylene Diamine Tetraacetate (EDTA) in Soaps or Synthetic Detergents

    D1768 Standard Test Method for Sodium Alkylbenzene Sulfonate in Synthetic Detergents by Ultraviolet Absorption

    D2022 Standard Test Methods of Sampling and Chemical Analysis of Chlorine-Containing Bleaches

    D2023 Standard Test Method of Analysis for Sodium Toluene Sulfonate in Detergents

    D2180 Standard Test Method for Active Oxygen in Bleaching Compounds

    D2357 Standard for Qualitative Classification of Surfactants by Infrared Absorption

    D2358 Standard Test Method for Separation of Active Ingredient from Surfactant and Syndet Compositions

    D2959 Standard Test Method for Ethylene Oxide Content of Polyethoxylated Nonionic Surfactants

    D3048 Standard Test Method of Assay for Alkaline Protease

    D3049 Standard Test Method for Synthetic Anionic Ingredient by Cationic Titration

    D3598 Standard Test Method for Citrate in Synthetic Detergents

    D3673 Standard Test Methods for Chemical Analysis of Alpha Olefin Sulfonates

    D4251 Standard Test Method for Active Matter in Anionic Surfactants by Potentiometric Titration

    D4252 Standard Test Methods for Chemical Analysis of Alcohol Ethoxylates and Alkylphenol Ethoxylates

    D4337 Standard Test Methods for Analysis of Linear Detergent Alkylates

    D460 Standard Test Methods for Sampling and Chemical Analysis of Soaps and Soap Products

    D4608 Standard Test Method for Citrate in Detergents

    D4711 Standard Test Method for Sulfonic and Sulfuric Acids in Alkylbenzene Sulfonic Acids

    D4954 Standard Test Method for Determination of Nitrilotriacetates in Detergents

    D500 Standard Test Methods of Chemical Analysis of Sulfonated and Sulfated Oils

    D501 Standard Test Methods of Sampling and Chemical Analysis of Alkaline Detergents

    D502 Standard Test Method for Particle Size of Soaps and Other Detergents

    D5070 Standard Test Method for Synthetic Quaternary Ammonium Salts in Fabric Softeners by Potentiometric Titrations

    D5547 Standard Test Method for Clay and Zeolite in Powdered Laundry Detergents by Atomic Absorption

    D5806 Standard Test Method for Disinfectant Quaternary Ammonium Salts by Potentiometric Titration

    D6173 Standard Test Method for Determination of Various Anionic Surfactant Actives by Potentiometric Titration

    D800 Standard Test Methods of Chemical Analysis of Industrial Metal Cleaning Compositions

    D820 Standard Test Methods for Chemical Analysis of Soaps Containing Synthetic Detergents

    D928 Standard Specification for Sodium Bicarbonate


    D11.40 - Consumer Rubber Products

    D3492 Standard Specification for Rubber Contraceptives (Male Condoms)

    D3577 Standard Specification for Rubber Surgical Gloves

    D3578 Standard Specification for Rubber Examination Gloves

    D3579 Standard Specification for Rubber Surgical Drainage Tubes, Penrose-Type

    D3772 Standard Specification for Natural Rubber Finger Cots

    D4316 Standard Specification for Elastomeric Water Bottles

    D4679 Standard Specification for Rubber General Purpose, Household or Beautician Gloves

    D5151 Standard Test Method for Detection of Holes in Medical Gloves

    D5250 Standard Specification for Poly(vinyl chloride) Gloves for Medical Application

    D5712 Standard Test Method for Analysis of Aqueous Extractable Protein in Natural Rubber and Its Products Using the Modified Lowry Method

    D6124 Standard Test Method for Residual Powder on Medical Gloves

    D6284 Standard Test Method for Rubber Property—Effect of Aqueous Solutions with Available Chlorine and Chloramine

    D6319 Standard Specification for Nitrile Examination Gloves for Medical Application

    D6324 Standard Test Methods for Male Condoms Made from Polyurethane

    D6355 Standard Test Method for Human Repeat Insult Patch Testing of Medical Gloves

    D6499 Standard Test Method for The Immunological Measurement of Antigenic Protein in Natural Rubber and its Products

    D6976 Standard Specification for Rubber Contraceptives—Vaginal Diaphragms

    D6977 Standard Specification for Polychloroprene Examination Gloves for Medical Application

    D6978 Standard Practice for Assessment of Resistance of Medical Gloves to Permeation by Chemotherapy Drugs

    D7102 Standard Guide for Determination of Endotoxin on Sterile Medical Gloves

    D7103 Standard Guide for Assessment of Medical Gloves

    D7160 Standard Practice for Determination of Expiration Dating for Medical Gloves

    D7161 Standard Practice for Determination of Real Time Expiration Dating of Mature Medical Gloves Stored Under Typical Warehouse Conditions

    D7198 Standard Specification for Disposable Embalming Gloves for Single-Use Applications

    D7246 Standard Test Method for Detection of Holes in Polyethylene Food Service Gloves

    D7329 Standard Specification for Food Preparation and Food Handling (Food Service) Gloves

    D7427 Standard Test Method for Immunological Measurement of Four Principal Allergenic Proteins (Hev b 1, 3, 5 and 6.02) in Natural Rubber and Its Products Derived from Latex

    D7558 Standard Test Method for Colorimetric/Spectrophotometric Procedure to Quantify Extractable Chemical Dialkyldithiocarbamate, Thiuram, and Mercaptobenzothiazole Accelerators in Natural Rubber Latex and Nitrile Gloves

    D7661 Standard Test Method for Determining Compatibility of Personal Lubricants with Natural Rubber Latex Condoms

    D7850 Standard Specification for Biological Properties of Industry Reference Materials (IRM)

    D7866 Standard Specification for Radiation Attenuating Protective Gloves

    D7907 Standard Test Methods for Determination of Bactericidal Efficacy on the Surface of Medical Examination Gloves


    D11.23 - Synthetic Rubbers

    D1417 Standard Test Methods for Rubber Latices-Synthetic

    D3185 Standard Test Methods for Rubber-Evaluation of SBR (Styrene-Butadiene Rubber) Including Mixtures With Oil

    D3186 Standard Test Methods for Rubber—Evaluation of SBR (Styrene-Butadiene Rubber) Mixed With Carbon Black or Carbon Black and Oil

    D3187 Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Rubber)

    D3188 Standard Test Methods for Rubber-Evaluation of IIR (Isobutene-Isoprene Rubber)

    D3189 Standard Test Methods for Rubber—Evaluation of Solution BR (Polybutadiene Rubber)

    D3190 Standard Test Method for Rubber-Evaluation of Chloroprene Rubber (CR)

    D3403 Standard Test Methods for Rubber—Evaluation of IR (Isoprene Rubber)

    D3484 Standard Test Methods for Rubber—Evaluation of Oil-Extended Solution BR (Polybutadiene Rubber)

    D3568 Standard Test Methods for Rubber—Evaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including Mixtures With Oil

    D3848 Standard Test Methods for Rubber—Evaluation of NBR (Acrylonitrile-Butadiene Copolymers) Mixed With Carbon Black

    D3896 Standard Practice for Rubber From Synthetic Sources—Sampling

    D3958 Standard Test Methods for Rubber—Evaluation of BIIR and CIIR (Halogenated Isobutene—Isoprene Rubber)

    D5605 Standard Practice for Styrene-Butadiene Rubber (SBR)—Establishing Raw Mooney Viscosity Target Values


    D11.22 - Natural Rubber

    D1076 Standard Specification for Rubber—Concentrated, Ammonia Preserved, Creamed, and Centrifuged Natural Latex

    D1278 Standard Test Methods for Rubber from Natural Sources—Chemical Analysis

    D1485 Standard Practice for Rubber from Natural Sources—Sampling and Sample Preparation

    D2227 Standard Specification for Natural Rubber (NR) Technical Grades

    D2449 Standard Specification for Rubber Bales From Natural Sources—Limit on Coating

    D3157 Standard Test Method for Rubber from Natural Sources—Color

    D3184 Standard Practice for Rubber - Evaluation of NR (Natural Rubber)

    D3194 Standard Test Method for Rubber From Natural Sources-Plasticity Retention Index (PRI)

    D7050 Standard Practice for Rubber from Natural Sources—Sampling and Sorting Bales Based on Predicted Processing Properties


    D11.20 - Compounding Materials and Procedures

    D1992 Standard Guide for Testing Synthetic Plasticizers Used in Rubber

    D1993 Standard Test Method for Precipitated Silica-Surface Area by Multipoint BET Nitrogen Adsorption

    D2226 Standard Classification for Various Types of Petroleum Oils for Rubber Compounding Use

    D3182 Standard Practice for Rubber—Materials, Equipment, and Procedures for Mixing Standard Compounds and Preparing Standard Vulcanized Sheets

    D4295 Standard Classification for Rubber Compounding Materials—Zinc Oxide

    D4315 Standard Test Methods for Rubber Compounding Material—Zinc Oxide

    D4528 Standard Classification for Rubber Compounding Materials—Sulfur

    D4570 Standard Test Method for Rubber Chemicals—Determination of Particle Size of Sulfur by Sieving (Dry)

    D4572 Standard Test Method for Rubber Chemicals—Wet Sieve Analysis of Sulfur

    D4620 Standard Test Method for Evaluating the Effective Surface Area of Zinc Oxide in Rubber

    D4676 Standard Classification for Rubber Compounding Materials—Antidegradants

    D4677 Standard Classification for Rubber Compounding Materials—Titanium Dioxide

    D4678 Standard Practice for Rubber - Preparation, Testing, Acceptance, Documentation, and Use of Reference Materials

    D4817 Standard Classification for Rubber Compounding Materials—Stearic Acid

    D4818 Standard Classification for Rubber Compounding Materials—Vulcanization Accelerators

    D4924 Standard Classification for Petroleum Waxes for Use in Rubber Compounding

    D5377 Standard Classification for Rubber Compounding Materials—Ground Coal

    D5603 Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber

    D5604 Standard Test Methods for Precipitated Silica—Surface Area by Single Point B.E.T. Nitrogen Adsorption

    D5644 Standard Test Methods for Rubber Compounding Materials—Determination of Particle Size Distribution of Recycled Vulcanizate Particulate Rubber

    D5899 Standard Classification System for Rubber Compounding Materials for Use in Computer Material Management Systems

    D5900 Standard Specification for Physical and Chemical Properties of Industry Reference Materials (IRM)

    D6738 Standard Test Method for Precipitated Silica - Volatile Content

    D6739 Standard Test Method for Silica - pH Value

    D6740 Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Residue on Ignition

    D6741 Standard Test Methods for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Sulfur Content

    D6814 Standard Test Method for Determination of Percent Devulcanization of Crumb Rubber Based on Crosslink Density

    D6843 Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Characterization by Gas Chromatography (GC)

    D6844 Standard Test Method for Silanes Used in Rubber Formulations (bis-(triethoxysilylpropyl)sulfanes): Characterization by High Performance Liquid Chromatography (HPLC)

    D6845 Standard Test Method for Silica, Precipitated, Hydrated—CTAB (Cetyltrimethylammonium Bromide) Surface Area

    D6854 Standard Test Method for Silica-Oil Absorption Number


    D11.16 - Application of Statistical Methods

    D4483 Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries

    D5406 Standard Practice for Rubber - Calculation of Producer's Process Performance Indexes

    D6085 Standard Practice for Sampling in Rubber Testing - Terminology and Basic Concepts

    D6600 Standard Practice for Evaluating Test Sensitivity for Rubber Test Methods


    D11.15 - Degradation Tests

    D1052 Standard Test Method for Measuring Rubber Deterioration—Cut Growth Using Ross Flexing Apparatus

    D1148 Standard Test Method for Rubber Deterioration—Discoloration from Ultraviolet (UV) or UV/Visible Radiation and Heat Exposure of Light-Colored Surfaces

    D1149 Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment

    D1171 Standard Test Method for Rubber Deterioration—Surface Ozone Cracking Outdoors or Chamber (Triangular Specimens)

    D1630 Standard Test Method for Rubber Property—Abrasion Resistance (Footwear Abrader)

    D2228 Standard Test Method for Rubber Property-Relative Abrasion Resistance by the Pico Abrader Method

    D3137 Standard Test Method for Rubber Property—Hydrolytic Stability

    D3389 Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)

    D430 Standard Test Methods for Rubber Deterioration—Dynamic Fatigue

    D4482 Test Method for Rubber Property - Extension Cycling Fatigue

    D454 Standard Test Method for Rubber Deterioration by Heat and Air Pressure

    D4575 Standard Test Methods for Rubber Deterioration—Reference and Alternative Method(s) for Determining Ozone Level in Laboratory Test Chambers

    D471 Standard Test Method for Rubber Property—Effect of Liquids

    D572 Standard Test Method for Rubber-Deterioration by Heat and Oxygen

    D573 Standard Test Method for Rubber—Deterioration in an Air Oven

    D5963 Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader)

    D5964 Standard Practice for Rubber IRM 901, IRM 902, and IRM 903 Replacement Oils for ASTM No. 1, ASTM No. 2, and ASTM No. 3 Oils

    D623 Standard Test Methods for Rubber Property—Heat Generation and Flexing Fatigue In Compression

    D750 Standard Practice for Rubber Deterioration Using Artificial Weathering Apparatus

    D813 Standard Test Method for Rubber Deterioration—Crack Growth

    D865 Standard Test Method for Rubber - Deterioration by Heating in Air (Test Tube Enclosure)

    D925 Standard Test Methods for Rubber Property—Staining of Surfaces (Contact, Migration, and Diffusion)


    D11.12 - Processability Tests

    D1646 Standard Test Methods for Rubber—Viscosity, Stress Relaxation, and Pre-Vulcanization Characteristics (Mooney Viscometer)

    D1917 Standard Test Methods for Rubber Property—Shrinkage of Raw and Compounded Hot-Polymerized Styrene-Butadiene Rubber (SBR)

    D2084 Standard Test Method for Rubber Property—Vulcanization Using Oscillating Disk Cure Meter

    D2230 Standard Test Method for Rubber Property—Extrudability of Unvulcanized Compounds

    D3346 Standard Test Methods for Rubber Property—Processability of Emulsion SBR (Styrene-Butadiene Rubber) With the Mooney Viscometer (Delta Mooney)

    D5099 Standard Test Methods for Rubber—Measurement of Processing Properties Using Capillary Rheometry

    D5289 Standard Test Method for Rubber Property—Vulcanization Using Rotorless Cure Meters

    D6048 Standard Practice for Stress Relaxation Testing of Raw Rubber, Unvulcanized Rubber Compounds, and Thermoplastic Elastomers

    D6049 Standard Test Method for Rubber Property—Measurement of the Viscous and Elastic Behavior of Unvulcanized Raw Rubbers and Rubber Compounds by Compression Between Parallel Plates

    D6204 Standard Test Method for Rubber—Measurement of Unvulcanized Rheological Properties Using Rotorless Shear Rheometers

    D6746 Standard Test Method for Determination of Green Strength and Stress Relaxation of Raw Rubber or Unvulcanized Compounds

    D7605 Standard Test Method for Thermoplastic Elastomers - Measurement of Polymer Melt Rheological Properties and Congealed Dynamic Properties Using Rotorless Shear Rheometers

    D7723 Standard Test Method for Rubber Property - Macro-Dispersion of Fillers in Compounds

    D926 Standard Test Method for Rubber Property—Plasticity and Recovery (Parallel Plate Method)


    D11.11 - Chemical Analysis

    D1519 Standard Test Methods for Rubber Chemicals—Determination of Melting Range

    D1766 Standard Test Method for Rubber Chemicals - Solubility

    D1817 Standard Test Method for Rubber Chemicals—Density

    D1991 Standard Test Method for Rubber Chemicals—2-Mercaptobenzothiazole (MBT)—Assay

    D2702 Standard Practice for Rubber Chemicals—Determination of Infrared Absorption Characteristics

    D297 Standard Test Methods for Rubber Products—Chemical Analysis

    D3156 Standard Practice for Rubber—Chromatographic Analysis of Antidegradants (Antioxidants, Antiozonants and Stabilizers)

    D3314 Standard Test Method for Rubber—Chemical Analysis for Polystyrene Blocks In SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices

    D3452 Standard Practice for Rubber—Identification by Pyrolysis-Gas Chromatography

    D3566 Standard Practice for Rubber—Determination of Bromine in the Presence of Chlorine by Oxygen Combustion

    D3616 Standard Test Method for Rubber—Determination of Gel, Swelling Index, and Dilute Solution Viscosity

    D3677 Standard Test Methods for Rubber - Identification by Infrared Spectrophotometry

    D3900 Standard Test Methods for Rubber-Determination of Ethylene Units in Ethylene-Propylene Copolymers (EPM) and in Ethylene-Propylene-Diene Terpolymers (EPDM) by Infrared Spectrometry

    D4004 Standard Test Methods for Rubber—Determination of Metal Content by Flame Atomic Absorption (AAS) Analysis

    D4026 Standard Test Method for Rubber Latex—Styrene-Butadiene Copolymer—Determination of Residual Styrene

    D4075 Standard Test Methods for Rubber Compounding Materials—Flame Atomic Absorption Analysis—Determination of Metals

    D4569 Standard Test Method for Rubber Compounding Materials—Determination of Acidity in Sulfur

    D4571 Standard Test Methods for Rubber Compounding Materials—Determination of Volatile Material

    D4573 Standard Test Method for Rubber Chemicals—Determination of Oil Content in Oil-Treated Sulfur

    D4574 Standard Test Methods for Rubber Compounding Materials—Determination of Ash Content

    D4578 Standard Test Methods for Rubber Chemicals—Determination of Percent Sulfur by Extraction

    D4934 Standard Test Method for Rubber Compounding Materials: 2-Benzothiazyl Sulfenamide Accelerators—Insolubles

    D4936 Standard Test Method for Mercaptobenzothiazole Sulfenamide Assay by Reduction/Titration

    D4937 Standard Test Method for p-Phenylenediamine Antidegradants Purity by Gas Chromatography

    D5044 Standard Test Method for Rubber Compounding Materials—Free 2-Mercaptobenzothiazole (MBT) in Benzothiazyl Disulfide (MBTS)

    D5051 Standard Test Method for Rubber Compounding Materials—Benzothiazyl Disulfide (MBTS)—Assay

    D5054 Standard Test Method for Rubber Chemicals—Diphenyl Guanidine (DPG) and Di-o-tolyl-guanidine (DOTG) Assay

    D5297 Standard Test Methods for Rubber Chemical Accelerator—Purity by High Performance Liquid Chromatography

    D5376 Standard Test Method for Rubber Compounding Materials—Determination of the Basic Nitrogen Content in Rubber Antioxidant: Polymerized TMQ

    D5460 Standard Test Method for Rubber Compounding Materials—Water in Rubber Additives

    D5461 Standard Test Method for Rubber Compounding Materials—Wet Sieve Analysis of Powdered Rubber Compounding Materials

    D5666 Standard Test Method for Rubber Chemical Antidegradants—Purity of p -Phenylenediamine (PPD) Antidegradants by High Performance Liquid Chromatography

    D5667 Standard Test Method for Rubber From Synthetic Sources-Total and Water Soluble Ash

    D5668 Standard Test Methods for Rubber From Synthetic Sources—Volatile Matter

    D5670 Standard Test Method for Rubber—Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Infrared Spectrophotometry

    D5774 Standard Test Methods for Rubber—Chemical Analysis of Extractables

    D5775 Standard Test Method for Rubber—Determination of Bound Styrene in Styrene Butadiene Rubber by Refractive Index

    D5805 Standard Test Methods for Rubber—Determination of Carbon Black in Masterbatches

    D5902 Standard Test Method for Rubber-Determination of Residual Unsaturation in Hydrogenated Nitrile Rubber (HNBR) by Iodine Value

    D6047 Standard Test Methods for Rubber, Raw—Determination of 5-Ethylidenenorbornene (ENB) or Dicyclopentadiene (DCPD) in Ethylene-Propylene-Diene (EPDM) Terpolymers

    D6370 Standard Test Method for Rubber—Compositional Analysis by Thermogravimetry (TGA)


    D11.10 - Physical Testing

    D1053 Standard Test Methods for Rubber Property—Stiffening at Low Temperatures: Flexible Polymers and Coated Fabrics

    D1229 Standard Test Method for Rubber Property-Compression Set at Low Temperatures

    D1329 Standard Test Method for Evaluating Rubber Property—Retraction at Lower Temperatures (TR Test)

    D1349 Standard Practice for Rubber—Standard Conditions for Testing

    D1415 Standard Test Method for Rubber Property—International Hardness

    D1456 Standard Test Method for Rubber Property—Elongation at Specific Stress

    D1460 Standard Test Method for Rubber Property—Change in Length During Liquid Immersion

    D2136 Standard Test Method for Coated Fabrics—Low-Temperature Bend Test

    D2137 Standard Test Methods for Rubber Property - Brittleness Point of Flexible Polymers and Coated Fabrics

    D2240 Standard Test Method for Rubber Property—Durometer Hardness

    D2632 Standard Test Method for Rubber Property—Resilience by Vertical Rebound

    D3183 Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products

    D3767 Standard Practice for Rubber—Measurement of Dimensions

    D3847 Standard Practice for Rubber—Directions for Achieving Subnormal Test Temperatures

    D395 Standard Test Methods for Rubber Property—Compression Set

    D412 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension

    D531 Standard Test Method for Rubber Property-Pusey and Jones Indentation

    D575 Standard Test Methods for Rubber Properties in Compression

    D5992 Standard Guide for Dynamic Testing of Vulcanized Rubber and Rubber-Like Materials Using Vibratory Methods

    D6147 Standard Test Method for Vulcanized Rubber and Thermoplastic Elastomer—Determination of Force Decay (Stress Relaxation) in Compression

    D624 Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers

    D6601 Standard Test Method for Rubber Properties—Measurement of Cure and After-Cure Dynamic Properties Using a Rotorless Shear Rheometer

    D7121 Standard Test Method for Rubber Property—Resilience Using Schob Type Rebound Pendulum

    D7426 Standard Test Method for Assignment of the DSC Procedure for Determining Tg of a Polymer or an Elastomeric Compound

    D814 Standard Test Method for Rubber Property—Vapor Transmission of Volatile Liquids

    D832 Standard Practice for Rubber Conditioning For Low Temperature Testing

    D945 Standard Test Methods for Rubber Properties in Compression or Shear (Mechanical Oscillograph)

    D991 Standard Test Method for Rubber Property—Volume Resistivity Of Electrically Conductive and Antistatic Products


    D09.94 - Editorial

    D1711 Standard Terminology Relating to Electrical Insulation

    D3636 Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials


    D09.21 - Fire Performance Standards

    D3874 Standard Test Method for Ignition of Materials by Hot Wire Sources

    D5424 Standard Test Method for Smoke Obscuration of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration

    D5425 Standard Guide for Development of Fire Hazard Assessment Standards of Electrotechnical Products

    D5485 Standard Test Method for Determining the Corrosive Effect of Combustion Products Using the Cone Corrosimeter

    D5537 Standard Test Method for Heat Release, Flame Spread, Smoke Obscuration, and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration

    D6113 Standard Test Method for Using a Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables

    D6194 Standard Test Method for Glow-Wire Ignition of Materials


    D09.19 - Dielectric Sheet and Roll Products

    D1039 Standard Test Methods for Glass-Bonded Mica Used as Electrical Insulation

    D1082 Standard Test Method for Dissipation Factor and Permittivity (Dielectric Constant) of Mica

    D1305 Standard Specification for Electrical Insulating Paper and Paperboard-Sulfate (Kraft) Layer Type

    D1677 Standard Methods for Sampling and Testing Untreated Mica Paper Used for Electrical Insulation

    D1830 Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method

    D202 Standard Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation

    D2131 Standard Classification for Natural Muscovite Mica Splittings

    D2413 Standard Practice for Preparation of Insulating Paper and Board Impregnated with a Liquid Dielectric

    D3376 Standard Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation

    D3394 Standard Test Methods for Sampling and Testing Electrical Insulating Board

    D351 Standard Classification for Natural Muscovite Block Mica and Thins Based on Visual Quality

    D352 Standard Test Methods for Pasted Mica Used in Electrical Insulation

    D4063 Standard Specification for Pressboard for Electrical Insulating Purposes

    D4243 Standard Test Method for Measurement of Average Viscometric Degree of Polymerization of New and Aged Electrical Papers and Boards

    D5470 Standard Test Method for Thermal Transmission Properties of Thermally Conductive Electrical Insulation Materials

    D6343 Standard Test Methods for Thin Thermally Conductive Solid Materials for Electrical Insulation and Dielectric Applications

    D7148 Standard Test Method for Determining the Ionic Resistivity (ER) of Alkaline Battery Separator Using a Carbon Electrode in an Electrolyte Bath Measuring System

    D748 Standard Specification for Natural Block Mica and Mica Films Suitable for Use in Fixed Mica-Dielectric Capacitors

    D982 Standard Test Method for Organic Nitrogen in Paper and Paperboard


    D09.01 - Electrical Insulating Varnishes, Powders and Encapsulating Compounds

    D115 Standard Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation

    D1932 Standard Test Method for Thermal Endurance of Flexible Electrical Insulating Varnishes

    D2519 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test

    D2756 Standard Test Method for Weight Loss of Electrical Insulating Varnishes

    D3056 Standard Test Method for Gel Time of Solventless Varnishes

    D3145 Standard Test Method for Thermal Endurance of Electrical Insulating Varnishes by the Helical Coil Method

    D3251 Standard Test Method for Thermal Endurance Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire

    D3312 Standard Test Method for Percent Reactive Monomer in Solventless Varnishes

    D3377 Standard Test Method for Weight Loss of Solventless Varnishes

    D3955 Standard Specification for Electrical Insulating Varnishes

    D4733 Standard Test Methods for Solventless Electrical Insulating Varnishes

    D4880 Standard Test Method for Salt Water Proofness of Insulating Varnishes Over Enamelled Magnet Wire

    D4881 Standard Test Method for Thermal Endurance of Varnished Fibrous- or Film-Wrapped Magnet Wire

    D4882 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test

    D5637 Standard Test Method for Moisture Resistance of Electrical Insulating Varnishes

    D5638 Standard Test Method for Chemical Resistance of Electrical Insulating Varnishes

    D6053 Standard Test Method for Determination of Volatile Organic Compound (VOC) Content of Electrical Insulating Varnishes

    D7894/D7894M Standard Test Method for Thermal Endurance of Coating Powders Used for Integral Bus Bar Insulation Systems

    D7895/D7895M Standard Test Method for Thermal Endurance of Coating Powders Used for Powder Coating Insulation Systems


    D07.01 - Fundamental Test Methods and Properties

    D1102 Standard Test Method for Ash in Wood

    D1105 Standard Test Method for Preparation of Extractive-Free Wood

    D1106 Standard Test Method for Acid-Insoluble Lignin in Wood

    D1107 Standard Test Method for Ethanol-Toluene Solubility of Wood

    D1108 Standard Test Method for Dichloromethane Solubles in Wood

    D1109 Standard Test Method for 1 % Sodium Hydroxide Solubility of Wood

    D1110 Standard Test Methods for Water Solubility of Wood

    D1166 Standard Test Method for Methoxyl Groups in Wood and Related Materials

    D143 Standard Test Methods for Small Clear Specimens of Timber

    D1666 Standard Test Methods for Conducting Machining Tests of Wood and Wood-Base Materials

    D1762 Standard Test Method for Chemical Analysis of Wood Charcoal

    D198 Standard Test Methods of Static Tests of Lumber in Structural Sizes

    D2394 Standard Test Methods for Simulated Service Testing of Wood and Wood-Base Finish Flooring

    D2395 Standard Test Methods for Density and Specific Gravity (Relative Density) of Wood and Wood-Based Materials

    D2555 Standard Practice for Establishing Clear Wood Strength Values

    D4442 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials

    D4444 Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters

    D4761 Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material

    D4933 Standard Guide for Moisture Conditioning of Wood and Wood-Base Materials

    D6782 Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters

    D6815 Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products

    D6874 Standard Test Methods for Nondestructive Evaluation of Wood-Based Flexural Members Using Transverse Vibration

    D6958 Standard Test Methods for Evaluating Side-Bonding Potential of Wood Coatings

    D7438 Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters

    D7469 Standard Test Methods for End-Joints in Structural Wood Products


    D04.47 - Miscellaneous Asphalt Tests

    D2042 Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene

    D3142/D3142M Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method

    D3143/D3143M Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus

    D3279 Standard Test Method for n-Heptane Insolubles

    D3289 Standard Test Method for Density of Semi-Solid and Solid Bituminous Materials (Nickel Crucible Method)

    D4124 Standard Test Method for Separation of Asphalt into Four Fractions

    D5546 Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge

    D6608 Standard Practice for the Identification of Trinidad Lake Asphalt in Asphalt Mixes

    D6703 Standard Test Method for Automated Heithaus Titrimetry

    D70 Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method)

    D7173 Standard Practice for Determining the Separation Tendency of Polymer from Polymer Modified Asphalt

    D7553 Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide


    D03.14 - Hydrogen and Fuel Cells

    D7550 Standard Test Method for Determination of Ammonium, Alkali and Alkaline Earth Metals in Hydrogen and Other Cell Feed Gases by Ion Chromatography

    D7606 Standard Practice for Sampling of High Pressure Hydrogen and Related Fuel Cell Feed Gases

    D7634 Standard Test Method for Visualizing Particulate Sizes and Morphology of Particles Contained in Hydrogen Fuel by Microscopy

    D7649 Standard Test Method for Determination of Trace Carbon Dioxide, Argon, Nitrogen, Oxygen and Water in Hydrogen Fuel by Jet Pulse Injection and Gas Chromatography/Mass Spectrometer Analysis

    D7650 Standard Test Method for Sampling of Particulate Matter in High Pressure Hydrogen used as a Gaseous Fuel with an In-Stream Filter

    D7651 Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel

    D7652 Standard Test Method for Determination of Trace Hydrogen Sulfide, Carbonyl Sulfide, Methyl Mercaptan, Carbon Disulfide and Total Sulfur in Hydrogen Fuel by Gas Chromatography and Sulfur Chemiluminescence Detection

    D7653 Standard Test Method for Determination of Trace Gaseous Contaminants in Hydrogen Fuel by Fourier Transform Infrared (FTIR) Spectroscopy

    D7675 Standard Test Method for Test Method for the Determination of Total Hydrocarbons in Hydrogen by FID Based Total Hydrocarbon (THC) Analyzer

    D7941/D7941M Standard Test Method for Hydrogen Purity Analysis Using a Continuous Wave Cavity Ring-Down Spectroscopy Analyzer


    D03.07 - Analysis of Chemical Composition of Gaseous Fuels

    D1945 Standard Test Method for Analysis of Natural Gas by Gas Chromatography

    D1946 Standard Practice for Analysis of Reformed Gas by Gas Chromatography

    D1988 Standard Test Method for Mercaptans in Natural Gas Using Length-of-Stain Detector Tubes

    D4810 Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes

    D4888 Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes

    D4984 Standard Test Method for Carbon Dioxide in Natural Gas Using Length-of-Stain Detector Tubes

    D7833 Standard Test Method for Determination of Hydrocarbons and Non-Hydrocarbon Gases in Gaseous Mixtures by Gas Chromatography


    D03.05 - Determination of Special Constituents of Gaseous Fuels

    D1072 Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration

    D1142 Standard Test Method for Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point Temperature

    D4084 Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method)

    D4468 Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Colorimetry

    D5454 Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers

    D5504 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence

    D5954 Standard Test Method for Mercury Sampling and Measurement in Natural Gas by Atomic Absorption Spectroscopy

    D6228 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection

    D6273 Standard Test Methods for Natural Gas Odor Intensity

    D6350 Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy

    D6968 Standard Test Method for Simultaneous Measurement of Sulfur Compounds and Minor Hydrocarbons in Natural Gas and Gaseous Fuels by Gas Chromatography and Atomic Emission Detection

    D7551 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases and Natural Gas by Ultraviolet Fluorescence

    D7800/D7800M Standard Test Method for Determination of Elemental Sulfur in Natural Gas


    D02.J0.05 - Fuel Cleanliness

    D1094 Standard Test Method for Water Reaction of Aviation Fuels

    D2276 Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling

    D3240 Standard Test Method for Undissolved Water In Aviation Turbine Fuels

    D3948 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer

    D5452 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration

    D7797 Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy – Rapid Screening Method

    D7959 Standard Test Method for Chloride Content Determination


    D02.H0 - Liquefied Petroleum Gas

    D1265 Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method

    D1267 Standard Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method)

    D1835 Standard Specification for Liquefied Petroleum (LP) Gases

    D1837 Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases

    D1838 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases

    D2158 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases

    D2420 Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)

    D2421 Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis

    D2597 Standard Test Method for Analysis of Demethanized Hydrocarbon Liquid Mixtures Containing Nitrogen and Carbon Dioxide by Gas Chromatography

    D2598 Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis

    D2713 Standard Test Method for Dryness of Propane (Valve Freeze Method)

    D3700 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder

    D5305 Standard Test Method for Determination of Ethyl Mercaptan in LP-Gas Vapor

    D7756 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases by Gas Chromatography with Liquid, On-Column Injection

    D7828 Standard Test Method for Determination of Residue Composition in Liquefied Petroleum Gas (LPG) Using Automated Thermal Desorption/Gas Chromatography (ATD/GC)

    D7901 Standard Specification for Dimethyl Ether for Fuel Purposes


    D02.F0 - Manufactured Carbon and Graphite Products

    C1025 Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite

    C1039 Standard Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes

    C1179 Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air

    C559 Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles

    C560 Standard Test Methods for Chemical Analysis of Graphite

    C561 Standard Test Method for Ash in a Graphite Sample

    C562 Standard Test Method for Moisture in a Graphite Sample

    C565 Standard Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials

    C611 Standard Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature

    C625 Standard Practice for Reporting Irradiation Results on Graphite

    C651 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature

    C662 Standard Specification for Impervious Graphite Pipe and Threading

    C695 Standard Test Method for Compressive Strength of Carbon and Graphite

    C709 Standard Terminology Relating to Manufactured Carbon and Graphite

    C714 Standard Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method

    C747 Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance

    C748 Standard Test Method for Rockwell Hardness of Graphite Materials

    C749 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite

    C769 Standard Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining Young's Modulus

    C781 Standard Practice for Testing Graphite and Boronated Graphite Materials for High-Temperature Gas-Cooled Nuclear Reactor Components

    C783 Standard Practice for Core Sampling of Graphite Electrodes

    C808 Standard Guideline for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials

    C816 Standard Test Method for Sulfur in Graphite by Combustion-Iodometric Titration Method

    C838 Standard Test Method for Bulk Density of As-Manufactured Carbon and Graphite Shapes

    C886 Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials

    D7219 Standard Specification for Isotropic and Near-isotropic Nuclear Graphites

    D7301 Standard Specification for Nuclear Graphite Suitable for Components Subjected to Low Neutron Irradiation Dose

    D7542 Standard Test Method for Air Oxidation of Carbon and Graphite in the Kinetic Regime

    D7775 Standard Guide for Measurements on Small Graphite Specimens

    D7779 Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature

    D7846 Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Graphites

    D7972 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature


    D02.D0.04 - C4 Hydrocarbons

    D1025 Standard Test Method for Nonvolatile Residue of Polymerization-Grade Butadiene

    D1157 Standard Test Method for Total Inhibitor Content (TBC) of Light Hydrocarbons

    D2384 Standard Test Methods for Traces of Volatile Chlorides in Butane-Butene Mixtures

    D2426 Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography

    D2593 Standard Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography

    D4423 Standard Test Method for Determination of Carbonyls In C4 Hydrocarbons

    D4424 Standard Test Method for Butylene Analysis by Gas Chromatography

    D5274 Standard Guide for Analysis of 1,3–Butadiene Product

    D5799 Standard Test Method for Determination of Peroxides in Butadiene

    D7423 Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection


    D02.D0.03 - Propylene

    D2163 Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography

    D2712 Standard Test Method for Hydrocarbon Traces in Propylene Concentrates By Gas Chromatography

    D4864 Standard Test Method for Determination of Traces of Methanol in Propylene Concentrates by Gas Chromatography

    D5273 Standard Guide for Analysis of Propylene Concentrates

    D5303 Standard Test Method for Trace Carbonyl Sulfide in Propylene by Gas Chromatography


    D02.D0.02 - Ethylene

    D2504 Standard Test Method for Noncondensable Gases in C2 and Lighter Hydrocarbon Products by Gas Chromatography

    D2505 Standard Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography

    D5234 Standard Guide for Analysis of Ethylene Product

    D6159 Standard Test Method for Determination of Hydrocarbon Impurities in Ethylene by Gas Chromatography







    D02.14 - Stability and Cleanliness of Liquid Fuels

    D2068 Standard Test Method for Determining Filter Blocking Tendency

    D2274 Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)

    D2709 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge

    D381 Standard Test Method for Gum Content in Fuels by Jet Evaporation

    D4176 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)

    D4625 Standard Test Method for Middle Distillate Fuel Storage Stability at 43 °C (110 °F)

    D4740 Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test

    D4860 Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating)

    D4870 Standard Test Method for Determination of Total Sediment in Residual Fuels

    D525 Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method)

    D5304 Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure

    D5705 Standard Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils

    D6021 Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection

    D6217 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration

    D6426 Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils

    D6468 Standard Test Method for High Temperature Stability of Middle Distillate Fuels

    D6469 Standard Guide for Microbial Contamination in Fuels and Fuel Systems

    D6560 Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products

    D6748 Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer)

    D6974 Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures

    D7060 Standard Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)

    D7061 Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene-Containing Heavy Fuel Oils as Separability Number by an Optical Scanning Device

    D7112 Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)

    D7157 Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (n-Heptane Phase Separation; Optical Detection)

    D7261 Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer

    D7321 Standard Test Method for Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration

    D7451 Standard Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark Ignition Fuels

    D7462 Standard Test Method for Oxidation Stability of Biodiesel (B100) and Blends of Biodiesel with Middle Distillate Petroleum Fuel (Accelerated Method)

    D7463 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water

    D7464 Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing

    D7501 Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT)

    D7525 Standard Test Method for Oxidation Stability of Spark Ignition Fuel—Rapid Small Scale Oxidation Test (RSSOT)

    D7545 Standard Test Method for Oxidation Stability of Middle Distillate Fuels—Rapid Small Scale Oxidation Test (RSSOT)

    D7548 Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products

    D7577 Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends

    D7619 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter

    D7621 Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction

    D7687 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel, Fuel/Water Mixtures, and Fuel-Associated Water with Sample Concentration by Filtration

    D7827 Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene from Heavy Fuel Oils as Separability Number by an Optical Device

    D7847 Standard Guide for Interlaboratory Studies for Microbiological Test Methods

    D7963 Standard Test Method for Determination of Contamination Level of Fatty Acid Methyl Esters in Middle Distillate and Residual Fuels Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method

    D7978 Standard Test Method for Determination of the Viable Aerobic Microbial Content of Fuels and Associated Water—Thixotropic Gel Culture Method

    D873 Standard Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method)


    D02.06 - Analysis of Liquid Fuels and Lubricants

    D1093 Standard Test Method for Acidity of Hydrocarbon Liquids and Their Distillation Residues

    D189 Standard Test Method for Conradson Carbon Residue of Petroleum Products

    D2273 Standard Test Method for Trace Sediment in Lubricating Oils

    D2896 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration

    D2982 Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils

    D322 Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation

    D3242 Standard Test Method for Acidity in Aviation Turbine Fuel

    D3339 Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration

    D3607 Standard Test Method for Removing Volatile Contaminants from Used Engine Oils by Stripping

    D4055 Standard Test Method for Pentane Insolubles by Membrane Filtration

    D4530 Standard Test Method for Determination of Carbon Residue (Micro Method)

    D4739 Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration

    D483 Standard Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils

    D524 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products

    D565 Standard Test Method for Carbonizable Substances in White Mineral Oil

    D5770 Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing

    D5800 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method

    D5984 Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration

    D6082 Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils

    D6375 Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method

    D664 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration

    D7317 Standard Test Method for Coagulated Pentane Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method)

    D7579 Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol

    D7795 Standard Test Method for Acidity in Ethanol and Ethanol Blends by Titration

    D7946 Standard Test Method for Initial pH (i-pH)-Value of Petroleum Products

    D892 Standard Test Method for Foaming Characteristics of Lubricating Oils

    D893 Standard Test Method for Insolubles in Used Lubricating Oils

    D91 Standard Test Method for Precipitation Number of Lubricating Oils

    D94 Standard Test Methods for Saponification Number of Petroleum Products

    D974 Standard Test Method for Acid and Base Number by Color-Indicator Titration


    D02.05 - Properties of Fuels, Petroleum Coke and Carbon Material

    D130 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test

    D1405/D1405M Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

    D1500 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)

    D156 Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)

    D2318 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch

    D2319/D2319M Standard Test Method for Softening Point of Pitch (Cube-in-Air Method)

    D2320 Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)

    D2392 Standard Test Method for Color of Dyed Aviation Gasolines

    D240 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter

    D2415 Standard Test Method for Ash in Coal Tar and Pitch

    D2416 Standard Test Method for Coking Value of Tar and Pitch (Modified Conradson)

    D2638 Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer

    D2764 Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch

    D3104 Standard Test Method for Softening Point of Pitches (Mettler Softening Point Method)

    D3338/D3338M Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

    D3461 Standard Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method)

    D3703 Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels, Gasoline and Diesel Fuels

    D4072 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch

    D4292 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke

    D4296 Standard Practice for Sampling Pitch

    D4312 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)

    D4422 Standard Test Method for Ash in Analysis of Petroleum Coke

    D4529 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

    D4616 Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch

    D4715 Standard Test Method for Coking Value of Tar and Pitch (Alcan)

    D4746 Standard Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration

    D4809 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)

    D4868 Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels

    D4892 Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)

    D4893 Standard Test Method for Determination of Pitch Volatility

    D4930 Standard Test Method for Dust Control Material on Calcined Petroleum Coke

    D4931 Standard Test Method for Gross Moisture in Green Petroleum Coke

    D5003 Standard Test Method for Hardgrove Grindability Index (HGI) of Petroleum Coke

    D5004 Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement

    D5018 Standard Test Method for Shear Viscosity of Coal-Tar and Petroleum Pitches

    D5187 Standard Test Method for Determination of Crystallite Size (Lc of Calcined Petroleum Coke by X-Ray Diffraction

    D5502 Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry

    D5709 Standard Test Method for Sieve Analysis of Petroleum Coke

    D6045 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method

    D61 Standard Test Method for Softening Point of Pitches (Cube-in-Water Method)

    D6120 Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature

    D6258 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels

    D6353 Standard Guide for Sampling Plan and Core Sampling for Prebaked Anodes Used in Aluminum Production

    D6354 Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production

    D6374 Standard Test Method for Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure

    D6376 Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-Ray Fluorescence Spectroscopy

    D6447 Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis

    D6558 Standard Test Method for Determination of TGA CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks

    D6559 Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks

    D6744 Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique

    D6745 Standard Test Method for Linear Thermal Expansion of Electrode Carbons

    D6756 Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer

    D6791 Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke

    D6969 Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis

    D6970 Standard Practice for Collection of Calcined Petroleum Coke Samples for Analysis

    D7058 Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer

    D7095 Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip

    D71 Standard Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)

    D7280 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch by Stainless Steel Crucible Filtration

    D7454 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus


    D02.03 - Elemental Analysis

    C1234 Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations

    D1018 Standard Test Method for Hydrogen In Petroleum Fractions

    D1091 Standard Test Methods for Phosphorus in Lubricating Oils and Additives

    D1266 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)

    D129 Standard Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method)

    D1318 Standard Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method)

    D1552 Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and IR Detection

    D1839 Standard Test Method for Amyl Nitrate in Diesel Fuels

    D2622 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry

    D2784 Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp)

    D3120 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry

    D3227 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)

    D3228 Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method

    D3230 Standard Test Method for Salts in Crude Oil (Electrometric Method)

    D3231 Standard Test Method for Phosphorus in Gasoline

    D3237 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy

    D3246 Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry

    D3341 Standard Test Method for Lead in Gasoline - Iodine Monochloride Method

    D3348 Standard Test Method for Rapid Field Test for Trace Lead in Unleaded Gasoline (Colorimetric Method)

    D3605 Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy

    D3701 Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry

    D3831 Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy

    D4045 Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry

    D4046 Standard Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry

    D4047 Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method

    D4294 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry

    D4628 Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry

    D4629 Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection

    D4808 Standard Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy

    D482 Standard Test Method for Ash from Petroleum Products

    D4927 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy

    D4929 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil

    D4951 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry

    D4952 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)

    D5056 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption

    D5059 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy

    D5184 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry

    D5185 Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

    D5291 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants

    D5384 Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)

    D5453 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence

    D5600 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

    D5622 Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis

    D5708 Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry

    D5761 Standard Practice for Emulsification/Suspension of Multiphase Fluid Waste Materials

    D5762 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence

    D5863 Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry

    D6334 Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence

    D6443 Standard Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)

    D6470 Standard Test Method for Salt in Crude Oils (Potentiometric Method)

    D6481 Standard Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy

    D6595 Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry

    D6667 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence

    D6728 Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry

    D6732 Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry

    D6920 Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection

    D7039 Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry

    D7040 Standard Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry

    D7041 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels, and Oils by Online Gas Chromatography with Flame Photometric Detection

    D7111 Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

    D7171 Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy

    D7212 Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter

    D7220 Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry

    D7260 Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants

    D7303 Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry

    D7318 Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration

    D7319 Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography

    D7328 Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection

    D7343 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants

    D7455 Standard Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis

    D7482 Standard Practice for Sampling, Storage, and Handling of Hydrocarbons for Mercury Analysis

    D7578 Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants

    D7620 Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection

    D7622 Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction

    D7623 Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method

    D7691 Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

    D7740 Standard Practice for Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants

    D7751 Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis

    D7757 Standard Test Method for Silicon in Gasoline and Related Products by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry

    D7876 Standard Practice for Practice for Sample Decomposition Using Microwave Heating (With or Without Prior Ashing) for Atomic Spectroscopic Elemental Determination in Petroleum Products and Lubricants

    D808 Standard Test Method for Chlorine in New and Used Petroleum Products (High Pressure Decomposition Device Method)

    D874 Standard Test Method for Sulfated Ash from Lubricating Oils and Additives


    D02.02.10 - Sediment and Water (API MPMS Chapter 10.0)

    D6304 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration


    D02.02.09 - Density Determination (API MPMS Chapter 9.0)

    D6822 Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method


    D02.02.08 - Sampling (API MPMS Chapter 8.0)

    D5842 Standard Practice for Sampling and Handling of Fuels for Volatility Measurement

    D5854 Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products


    D02.02.07 - Temperature Determination (API MPMS Chapter 7.0)

    D1550 Standard ASTM Butadiene Measurement Tables

    D2962 Standard Practice for Calculating Volume-Temperature Correction For Coal-Tar Pitches


    D02.02 - Hydrocarbon Measurement for Custody Transfer (Joint ASTM-API)

    D1250 Standard Guide for Use of the Petroleum Measurement Tables

    D1298 Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method

    D1657 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer

    D1744 Standard Test Method for Determination of Water in Liquid Petroleum Products by Karl Fischer Reagent

    D1796 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)

    D287 Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)

    D4006 Standard Test Method for Water in Crude Oil by Distillation

    D4007 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)

    D4057 Standard Practice for Manual Sampling of Petroleum and Petroleum Products

    D4177 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products

    D4377 Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration

    D473 Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method

    D4807 Standard Test Method for Sediment in Crude Oil by Membrane Filtration

    D4928 Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration

    D7829 Standard Guide for Sediment and Water Determination in Crude Oil

    D95 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation


    D01.57 - Artist Paints and Related Materials

    D4236 Standard Practice for Labeling Art Materials for Chronic Health Hazards

    D4302 Standard Specification for Artists’ Oil, Resin-Oil, and Alkyd Paints

    D4303 Standard Test Methods for Lightfastness of Colorants Used in Artists' Materials

    D4838 Standard Test Method for Determining the Relative Tinting Strength of Chromatic Paints

    D4941 Standard Practice for Preparing Drawdowns of Artists' Paste Paints

    D5067 Standard Specification for Artists' Watercolor Paints

    D5098 Standard Specification for Artists' Acrylic Dispersion Paints

    D5383 Standard Practice for Visual Determination of the Lightfastness of Art Materials by Art Technologists

    D5398 Standard Practice for Visual Evaluation of the Lightfastness of Art Materials by the User

    D5517 Standard Test Method for Determining Extractability of Metals from Art Materials

    D5724 Standard Specification for Gouache Paints

    D6801 Standard Test Method for Measuring Maximum Spontaneous Heating Temperature of Art and Other Materials

    D7354 Standard Guide for Artists’ Paint Waste Disposal in Private, Non-Commercial Settings

    D7355 Standard Guide for Artists' Paint Waste Disposal in Smaller Commercial or Educational Settings

    D7733 Standard Specification for Acrylic Dispersion Ground


    D01.56 - Printing Inks

    D1316 Standard Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer

    D2066 Standard Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions

    D2067 Standard Test Method for Coarse Particles in Printing Ink Dispersions

    D3424 Standard Practice for Evaluating the Relative Lightfastness and Weatherability of Printed Matter

    D4040 Standard Test Method for Rheological Properties of Paste Printing and Vehicles by the Falling-Rod Viscometer

    D4361 Standard Test Method for Apparent Tack of Printing Inks and Vehicles by a Three-Roller Tackmeter

    D4713 Standard Test Methods for Nonvolatile Content of Heatset and Liquid Printing Ink Systems

    D4942 Standard Test Methods for Water Pickup of Lithographic Printing Inks and Vehicles in a Laboratory Mixer

    D5010 Standard Guide for Testing Printing Inks and Related Materials

    D5181 Standard Test Method for Abrasion Resistance of Printed Matter by the GA-CAT Comprehensive Abrasion Tester

    D5909 Standard Test Method for Drying Time of Oxidative-Drying Printing Inks by Squalene Resistance

    D6073 Standard Test Method for Relative Setting of Heatset Printing Inks

    D6419 Standard Test Method for Volatile Content of Sheet-Fed and Coldset Web Offset Printing Inks

    D6487 Standard Practice for Preparing Prints of Paste Printing Inks Using a Hand Operated Laboratory Flat-Bed Press

    D6488 Standard Terminology Relating to Print Problems

    D6531 Standard Test Method for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement

    D6688 Standard Practice for Relative Resistance of Printed Matter to Liquid Chemicals by a Sandwich Technique

    D6846 Standard Practice for Preparing Prints of Paste Printing Inks with a Printing Gage

    D7163 Standard Test Method for Specular Gloss of Printed Matter

    D7188 Standard Terminology for Printing Inks, Materials, and Processes

    D7189 Standard Test Method for Relative Mileage of News Ink on Newsprint

    D7244 Standard Test Method for Relative Cure of Energy-Cured Inks and Coatings

    D7305 Standard Test Method for Reflection Density of Printed Matter

    D7680 Standard Practice for Preparing Prints of Paste Printing Inks by a Motor-Driven Printability Tester

    D7734/D7734M Standard Test Method for Determination of Open Time of Oxidative Printing Inks and Overprint Varnishes by a Manual Method


    D01.55 - Factory Applied Coatings on Preformed Products

    D1308 Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes

    D2199 Standard Test Method for Measurement of Plasticizer Migration From Vinyl Fabrics to Lacquers

    D2338 Standard Test Method for Determining Particle Size of Multicolor Lacquers

    D3002 Standard Guide for Evaluation of Coatings Applied to Plastics

    D3170/D3170M Standard Test Method for Chipping Resistance of Coatings

    D3260 Standard Test Method for Acid and Mortar Resistance of Factory-Applied Clear Coatings on Extruded Aluminum Products

    D3322 Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal

    D333 Standard Guide for Clear and Pigmented Lacquers

    D365 Standard Guide for Soluble Nitrocellulose Base Solutions

    D3732 Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings

    D5009 Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions

    D5066 Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints—Weight Basis

    D5286 Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints

    D5327 Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions

    D5403 Standard Test Methods for Volatile Content of Radiation Curable Materials

    D6279 Standard Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings

    D6486 Standard Practice for Short Term Vehicle Service Exposure of Automotive Coatings

    D7270 Standard Guide for Environmental and Performance Verification of Factory-Applied Liquid Coatings


    D01.52 - Factory Coated Wood Products

    D2065 : Standard Test Method for Determination of Edge Performance of Composite Wood Products Under Surfactant Accelerated Moisture Stress

    D2091 Standard Test Method for Print Resistance of Lacquers

    D2793 Standard Test Method for Block Resistance of Organic Coatings on Wood Panel Substrates

    D2921 Standard Test Method for Qualitative Tests for the Presence of Water Repellents and Preservatives in Wood Products

    D3023 Standard Practice for Determination of Resistance of Factory-Applied Coatings on Wood Products to Stains and Reagents

    D5235 Standard Test Method for Microscopic Measurement of Dry Film Thickness of Coatings on Wood Products

    D5795 Standard Test Method for Determination of Liquid Water Absorption of Coated Hardboard and Other Composite Wood Products Via “Cobb Ring” Apparatus


    D01.46 - Industrial Protective Coatings

    C1486 Standard Practice for Testing Chemical-Resistant Broadcast and Slurry-Broadcast Resin Monolithic Floor Surfacings

    C267 Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes

    C307 Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings

    C308 Standard Test Methods for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars

    C413 Standard Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

    C531 Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

    C579 Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

    C580 Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

    C722 Standard Specification for Chemical-Resistant Monolithic Floor Surfacings

    C868 Standard Test Method for Chemical Resistance of Protective Linings

    D2200 Standard Practice for Use of Pictorial Surface Preparation Standards and Guides for Painting Steel Surfaces

    D3276 Standard Guide for Painting Inspectors (Metal Substrates)

    D4417 Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel

    D4541 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers

    D4752 Standard Practice for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub

    D4787 Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates

    D4940 Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blasting Abrasives

    D5043 Standard Practice for Field Identification of Coatings

    D5064 Standard Practice for Conducting a Patch Test to Assess Coating Compatibility

    D5065 Standard Guide for Assessing the Condition of Aged Coatings on Steel Surfaces

    D5162 Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates

    D5402 Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs

    D5702 Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals

    D6206 Standard Practice for Sampling of Coating Films

    D6237 Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)

    D6386 Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting

    D6577 Standard Guide for Testing Industrial Protective Coatings

    D6578/D6578M Standard Practice for Determination of Graffiti Resistance

    D6677 Standard Test Method for Evaluating Adhesion by Knife

    D6943 Standard Practice for Immersion Testing of Industrial Protective Coatings

    D6944 Standard Practice for Resistance of Cured Coatings to Thermal Cycling

    D7055 Standard Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings

    D7127 Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument

    D7234 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers

    D7393 Standard Practice for Indicating Oil in Abrasives

    D7396 Standard Guide for Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting

    D7682 Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty

    D7803 Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Powder Coating

    D7868 Standard Practice for Determining the Dry Fall (Fog) Properties of Protective Coatings


    D01.45 - Marine Coatings

    D3623 Standard Test Method for Testing Antifouling Panels in Shallow Submergence

    D4938 Standard Test Method for Erosion Testing of Antifouling Paints Using High Velocity Water

    D4939 Standard Test Method for Subjecting Marine Antifouling Coating to Biofouling and Fluid Shear Forces in Natural Seawater

    D5063 Standard Guide for Use of Certification of Coating Conformance Form

    D5108 Standard Test Method for Organotin Release Rates of Antifouling Coating Systems in Sea Water

    D5479 Standard Practice for Testing Biofouling Resistance of Marine Coatings Partially Immersed

    D5618 Standard Test Method for Measurement of Barnacle Adhesion Strength in Shear

    D6442 Standard Test Method for Determination of Copper Release Rate From Antifouling Coatings in Substitute Ocean Water

    D6903 Standard Test Method for Determination of Organic Biocide Release Rate From Antifouling Coatings in Substitute Ocean Water

    D6990 Standard Practice for Evaluating Biofouling Resistance and Physical Performance of Marine Coating Systems


    D01.44 - Traffic Coatings

    D1155 Standard Test Method for Roundness of Glass Spheres

    D1214 Standard Test Method for Sieve Analysis of Glass Spheres

    D1309 Standard Test Method for Settling Properties of Traffic Paints During Storage

    D2205 Standard Guide for Selection of Tests for Traffic Paints

    D2743 Standard Practices for Uniformity of Traffic Paint Vehicle Solids by Spectroscopy and Gas Chromatography

    D2792 Standard Test Method for Solvent and Fuel Resistance of Traffic Paint

    D4796 Standard Test Method for Bond Strength of Thermoplastic Traffic Marking Materials

    D4797 Standard Test Methods for Gravimetric Analysis of White and Yellow Thermoplastic Traffic Marking

    D4960 Standard Test Method for Evaluation of Color for Thermoplastic Traffic Marking Materials

    D711 Standard Test Method for No-Pick-Up Time of Traffic Paint

    D713 Standard Practice for Conducting Road Service Tests on Fluid Traffic Marking Materials

    D7307 Standard Practice for Sampling of Thermoplastic Traffic Marking Materials

    D7308 Standard Practice for Sample Preparation of Thermoplastic Traffic Marking Materials

    D7377 Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints using a Water Faucet

    D7538 Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints Using an Atomizing Spray Device

    D7539 Standard Practice for Using a Test Chamber for Humidity Conditioning of Test Panels of Pavement Marking Paints

    D7681 Standard Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer

    D7735 Standard Test Method for Type A Durometer Hardness Testing of Road Marking Thermoplastic at Elevated Temperatures

    D7971 Standard Guide for Measuring Roundness of Glass Spheres Using a Flowing Stream Digital Image Analyzer

    D868 Standard Practice for Determination of Degree of Bleeding of Traffic Paint

    D913 Standard Practice for Evaluating Degree of Traffic Paint Line Wear


    D01.42 - Architectural Coatings

    D1849 Standard Test Method for Package Stability of Paint

    D2064 Standard Test Method for Print Resistance of Architectural Paints

    D2243 Standard Test Method for Freeze-Thaw Resistance of Water-Borne Coatings

    D2486 Standard Test Methods for Scrub Resistance of Wall Paints

    D3258 Standard Test Method for Porosity of White or Near White Paint Films by Staining

    D3450 Standard Test Method for Washability Properties of Interior Architectural Coatings

    D3730 Standard Guide for Testing High-Performance Interior Architectural Wall Coatings

    D3928 Standard Test Method for Evaluation of Gloss or Sheen Uniformity

    D4062 Standard Test Method for Leveling of Paints by Draw-Down Method

    D4213 Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss

    D4400 Standard Test Method for Sag Resistance of Paints Using a Multinotch Applicator

    D4446/D4446M Standard Test Method for Anti-Swelling Effectiveness of Water-Repellent Formulations and Differential Swelling of Untreated Wood When Exposed to Liquid Water Environments

    D4707 Standard Test Method for Measuring Paint Spatter Resistance During Roller Application

    D4828 Standard Test Methods for Practical Washability of Organic Coatings

    D4946 Standard Test Method for Blocking Resistance of Architectural Paints

    D4958 Standard Test Method for Comparison of the Brush Drag of Latex Paints

    D5007 Standard Test Method for Wet-to-Dry Hiding Change

    D5146 Standard Guide to Testing Solvent-Borne Architectural Coatings

    D5150 Standard Test Method for Hiding Power of Architectural Paints Applied by Roller

    D5324 Standard Guide for Testing Water-Borne Architectural Coatings

    D5326 Standard Test Method for Color Development in Tinted Latex Paints

    D5401 Standard Test Method for Evaluating Clear Water Repellent Coatings on Wood

    D6189 Standard Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings

    D6583 Standard Test Method for Porosity of Paint Film by Mineral Oil Absorption

    D6686 Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings

    D6736 Standard Test Method for Burnish Resistance of Latex Paints

    D6763 Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents

    D6900 Standard Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate

    D7072 Standard Practice for Evaluating Accelerated Efflorescence of Latex Coatings

    D7073 Standard Guide for Application and Evaluation of Brush and Roller Applied Paint Films

    D7190 Standard Practice to Evaluate Leaching of Water-Soluble Materials from Latex Paint Films

    D7306 Standard Practice for Testing Low Temperature Film-Formation of Latex Paints by Visual Observation

    D7488 Standard Test Method for Open Time of Latex Paints

    D7489 Standard Practice for Evaluating Touch-Up Properties of Architectural Coatings under Various Environmental Conditions

    D7514 Standard Test Method for Evaluating Ink Stainblocking of Architectural Paint Systems by Visual Assessment

    D7786 Standard Test Method for Determining Enamel Holdout

    D7787/D7787M Standard Practice for Selecting Wood Substrates for Weathering Evaluations of Architectural Coatings


    D01.37 - Ink Vehicles

    D5062 Standard Test Method for Resin Solution Dilutability by Volumetric/Gravimetric Determination

    D5165 Standard Practice for Laboratory Preparation of Gelled Vehicles Using a Resin Kettle

    D5166 Standard Practice for Laboratory Preparation of Gelled Vehicle Samples Using a Microwave Oven

    D5958 Standard Practices for Preparation of Oil-Based Ink Resin Solutions

    D6038 Standard Test Methods for Determining the Compatibility of Resin/Solvent Mixtures by Precipitation Temperature (Cloud Point)

    D6336 Standard Practice for Evaluation of Flushing Vehicles for Pigment Wetting Using a Vacuum Modified Sigma Blade Mixer

    D6606 Standard Test Method for Viscosity and Yield of Vehicles and Varnishes by the Duke Viscometer

    D6687 Standard Guide for Testing Printing Ink Vehicles and Components Thereof

    D6887 Standard Test Method for Testing Alkyd Compatibility with Resin or Resin Solutions

    D6989 Standard Practices for Preparation of Solvent and Water Based Ink Resin Solutions

    D7271 Standard Test Method for Viscoelastic Properties of Paste Ink Vehicle Using an Oscillatory Rheometer

    D7805 Standard Terminology for Printing Ink Vehicles and Related Materials


    D01.36 - Cellulose and Cellulose Derivatives

    D1343 Standard Test Method for Viscosity of Cellulose Derivatives by Ball-Drop Method

    D1348 Standard Test Methods for Moisture in Cellulose

    D1439 Standard Test Methods for Sodium Carboxymethylcellulose

    D1695 Standard Terminology of Cellulose and Cellulose Derivatives

    D1696 Standard Test Method for Solubility of Cellulose in Sodium Hydroxide

    D1795 Standard Test Method for Intrinsic Viscosity of Cellulose

    D1926 Standard Test Methods for Carboxyl Content of Cellulose

    D2363 Standard Test Methods for Hydroxypropyl Methylcellulose

    D2364 Standard Test Methods for Hydroxyethylcellulose

    D2929 Standard Test Method for Sulfur Content of Cellulosic Materials by X-Ray Fluorescence

    D3516 Standard Test Methods for Ashing Cellulose

    D3876 Standard Test Method for Methoxyl and Hydroxypropyl Substitution in Cellulose Ether Products by Gas Chromatography

    D3971 Standard Test Method for Dichloromethane-Soluble Matter in Cellulose

    D4085 Standard Test Method for Metals in Cellulose by Atomic Absorption Spectrophotometry

    D4794 Standard Test Method for Determination of Ethoxyl or Hydroxyethoxyl Substitution in Cellulose Ether Products by Gas Chromatography

    D4795 Standard Test Method for Nitrogen Content of Soluble Nitrocellulose—Alternative Method

    D5400 Standard Test Methods for Hydroxypropylcellulose

    D5896 Standard Test Method for Carbohydrate Distribution of Cellulosic Materials

    D5897 Standard Test Method for Determination of Percent Hydroxyl on Cellulose Esters by Potentiometric Titration—Alternative Method

    D6188 Standard Test Method for Viscosity of Cellulose by Cuprammonium Ball Fall

    D6942 Standard Test Method for Stability of Cellulose Fibers in Alkaline Environments

    D7357 Standard Specification for Cellulose Fibers for Fiber-Reinforced Concrete

    D817 Standard Test Methods of Testing Cellulose Acetate Propionate and Cellulose Acetate Butyrate

    D871 Standard Test Methods of Testing Cellulose Acetate

    D914 Standard Test Methods for Ethylcellulose


    D01.35 - Solvents, Plasticizers, and Chemical Intermediates

    D1007 Standard Specification for sec-Butyl Alcohol

    D1078 Standard Test Method for Distillation Range of Volatile Organic Liquids

    D1133 Standard Test Method for Kauri-Butanol Value of Hydrocarbon Solvents

    D1152 Standard Specification for Methanol (Methyl Alcohol)

    D1153 Standard Specification for Methyl Isobutyl Ketone

    D1209 Standard Test Method for Color of Clear Liquids (Platinum-Cobalt Scale)

    D1257 Standard Specification for High-Gravity Glycerin

    D1296 Standard Test Method for Odor of Volatile Solvents and Diluents

    D1353 Standard Test Method for Nonvolatile Matter in Volatile Solvents for Use in Paint, Varnish, Lacquer, and Related Products

    D1363 Standard Test Method for Permanganate Time of Acetone and Methanol

    D1364 Standard Test Method for Water in Volatile Solvents (Karl Fischer Reagent Titration Method)

    D1476 Standard Test Method for Heptane Miscibility of Lacquer Solvents

    D1613 Standard Test Method for Acidity in Volatile Solvents and Chemical Intermediates Used in Paint, Varnish, Lacquer, and Related Products

    D1614 Standard Test Method for Alkalinity in Acetone

    D1617 Standard Test Method for Ester Value of Solvents and Thinners

    D1718 Standard Specification for Isobutyl Acetate (95% Grade)

    D1719 Standard Specification for Isobutyl Alcohol

    D1720 Standard Test Method for Dilution Ratio of Active Solvents in Cellulose Nitrate Solutions

    D1722 Standard Test Method for Water Miscibility of Water-Soluble Solvents

    D1836 Standard Specification for Commercial Hexanes

    D1969 Standard Specification for 2-Ethylhexanol

    D2086 Standard Test Method for Acidity in Vinyl Acetate and Acetaldehyde

    D2087 Standard Test Method for Iron in Formaldehyde Solutions

    D2190 Standard Specification for Vinyl Acetate

    D2191 Standard Test Method for Acetaldehyde Content of Vinyl Acetate

    D2192 Standard Test Method for Purity of Aldehydes and Ketones

    D2193 Standard Test Method for Hydroquinone in Vinyl Acetate

    D2194 Standard Test Method for Concentration of Formaldehyde Solutions

    D235 Standard Specification for Mineral Spirits (Petroleum Spirits) (Hydrocarbon Dry Cleaning Solvent)

    D2378 Standard Specification for Formaldehyde 50 % Grade Uninhibited and 37 % Grade Inhibited and Uninhibited

    D2379 Standard Test Method for Acidity of Formaldehyde Solutions

    D2380 Standard Test Method for Methanol Content of Formaldehyde Solutions

    D2627 Standard Specification for Diacetone Alcohol

    D2634 Standard Specification for Methyl Amyl Acetate (95 % Grade)

    D2635 Standard Specification for Methyl Isobutyl Carbinol

    D2636 Standard Specification for Hexylene Glycol

    D268 Standard Guide for Sampling and Testing Volatile Solvents and Chemical Intermediates for Use in Paint and Related Coatings and Material

    D2693 Standard Specification for Ethylene Glycol

    D2694 Standard Specification for Diethylene Glycol

    D2804 Standard Test Method for Purity of Methyl Ethyl Ketone By Gas Chromatography

    D2916 Standard Specification for Isophorone

    D2917 Standard Specification for Methyl Isoamyl Ketone

    D304 Standard Specification for n-Butyl Alcohol (Butanol)

    D3125 Standard Test Method for Monomethyl Ether of Hydroquinone in Colorless Monomeric Acrylate Esters and Acrylic Acid

    D3128 Standard Specification for 2-Methoxyethanol

    D3130 Standard Specification for n-Propyl Acetate (96 % Grade)

    D3131 Standard Specification for Isopropyl Acetate (99 % Grade)

    D3257 Standard Test Methods for Aromatics in Mineral Spirits by Gas Chromatography

    D329 Standard Specification for Acetone

    D330 Standard Specification for 2-Butoxyethanol

    D331 Standard Specification for 2-Ethoxyethanol

    D3329 Standard Test Method for Purity of Methyl Isobutyl Ketone by Gas Chromatography

    D3540 Standard Specification for Primary Amyl Acetate, Synthetic (98 % Grade)

    D3545 Standard Test Method for Alcohol Content and Purity of Acetate Esters by Gas Chromatography

    D3546 Standard Test Method for Formic Acid in Glacial Acetic Acid

    D3548 Standard Specification for Ethyl Acrylate

    D3620 Standard Specification for Glacial Acetic Acid

    D3622 Standard Specification for 1-Propanol (n-Propyl Alcohol)

    D3728 Standard Specification for 2-Ethoxyethyl Acetate (99 % Grade)

    D3734 Standard Specification for High-Flash Aromatic Naphthas

    D3735 Standard Specification for VM&P Naphthas

    D3893 Standard Test Method for Purity of Methyl Amyl Ketone and Methyl Isoamyl Ketone by Gas Chromatography

    D4360 Standard Specification for Methyl n-Amyl Ketone

    D4367 Standard Test Method for Benzene in Hydrocarbon Solvents by Gas Chromatography

    D4416 Standard Specification for Acrylic Acid

    D4614 Standard Specification for Ethyl Acetate (All Grades)

    D4615 Standard Specification for n-Butyl Acetate (All Grades)

    D4709 Standard Specification for Methyl Acrylate

    D4710 Standard Specification for Acetaldehyde

    D4773 Standard Test Method for Purity of Propylene Glycol Monomethyl Ether, Dipropylene Glycol Monomethyl Ether, and Propylene Glycol Monomethyl Ether Acetate

    D4835 Standard Specification for Propylene Glycol Monomethyl Ether Acetate

    D4836 Standard Specification for Dipropylene Glycol Monomethyl Ether

    D4837 Standard Specification for Propylene Glycol Monomethyl Ether

    D5008 Standard Test Method for Ethyl Methyl Pentanol Content and Purity Value of 2-Ethylhexanol By Gas Chromatography

    D5137 Standard Specification for Hexyl Acetate

    D5164 Standard Specification for Propylene Glycol and Dipropylene Glycol

    D5399 Standard Test Method for Boiling Point Distribution of Hydrocarbon Solvents by Gas Chromatography

    D600 Standard Specification for Liquid Paint Driers

    D608 Standard Specification for Dibutyl Phthalate

    D6229 Standard Test Method for Trace Benzene in Hydrocarbon Solvents by Capillary Gas Chromatography

    D7090 Standard Test Method for Purity of Isophorone by Capillary Gas Chromatography

    D740 Standard Specification for Methyl Ethyl Ketone

    D770 Standard Specification for Isopropyl Alcohol


    D01.34 - Pine Chemicals and Hydrocarbon Resins

    D1065 Standard Test Method for Unsaponifiable Matter in Naval Stores, Including Rosin, Tall Oil, and Related Products

    D1240 Standard Test Methods for Rosin Acids Content of Pine Chemicals, Including Rosin, Tall Oil, and Related Products

    D1585 Standard Test Methods for Fatty Acids Content of Naval Stores, Including Rosin, Tall Oil, and Related Products

    D1981 Standard Test Method for Measuring Color After Heating of Tall Oil Fatty Acids

    D1982 Standard Test Method for Titer of Fatty Acids

    D233 Standard Test Methods of Sampling and Testing Turpentine

    D269 Standard Test Method for Insoluble Matter in Rosin and Rosin Derivatives

    D464 Standard Test Methods for Saponification Number of Naval Store Products Including Tall Oil and Other Related Products

    D465 Standard Test Methods for Acid Number of Naval Stores Products Including Tall Oil and Other Related Products

    D509 Standard Test Methods of Sampling and Grading Rosin

    D5768 Standard Test Method for Determination of Iodine Value of Tall Oil Fatty Acids

    D5974 Standard Test Methods for Fatty and Rosin Acids in Tall Oil Fractionation Products by Capillary Gas Chromatography

    D6090 Standard Test Method for Softening Point Resins (Mettler Cup and Ball Method)

    D6166 Standard Test Method for Color of Pine Chemicals and Related Products (Instrumental Determination of Gardner Color)

    D6267/D6267M Standard Test Method for Apparent Viscosity of Hydrocarbon Resins at Elevated Temperatures

    D6387 Standard Test Methods for Composition of Turpentine and Related Terpene Products by Capillary Gas Chromatography

    D6493 Standard Test Methods for Softening Point of Hydrocarbon Resins and Rosin Based Resins by Automated Ring-and-Ball Apparatus

    D6579 Standard Practice for Molecular Weight Averages and Molecular Weight Distribution of Hydrocarbon, Rosin and Terpene Resins by Size-Exclusion Chromatography

    D6604 Standard Practice for Glass Transition Temperatures of Hydrocarbon Resins by Differential Scanning Calorimetry

    D6605 Standard Practice for Determining the Color Stability of Hydrocarbon Resins After Heating

    D801 Standard Test Methods for Sampling and Testing Dipentene

    D802 Standard Test Methods for Sampling and Testing Pine Oils

    D803 Standard Test Methods for Testing Tall Oil

    D804 Standard Terminology Relating to Pine Chemicals, Including Tall Oil and Related Products

    D889 Standard Test Method for Volatile Oil in Rosin

    D890 Standard Test Method for Water in Liquid Pine Chemicals

    E28 Standard Test Methods for Softening Point of Resins Derived from Pine Chemicals and Hydrocarbons, by Ring-and-Ball Apparatus


    D01.33 - Polymers and Resins

    D154 Standard Guide for Testing Varnishes

    D1652 Standard Test Method for Epoxy Content of Epoxy Resins

    D1725 Standard Practice for Preparing Resin Solutions for Viscosity Measurement by Bubble Time Method

    D1726 Standard Test Methods for Hydrolyzable Chloride Content of Liquid Epoxy Resins

    D2074 Standard Test Methods for Total, Primary, Secondary, and Tertiary Amine Values of Fatty Amines by Alternative Indicator Method

    D2354 Standard Test Method for Minimum Film Formation Temperature (MFFT) of Emulsion Vehicles

    D2572 Standard Test Method for Isocyanate Groups in Urethane Materials or Prepolymers

    D360 Standard Specification for Shellac Varnishes

    D4142 Standard Guide for Testing Epoxy Resins

    D4143 Standard Guide for Testing Latex Vehicles

    D4301 Standard Test Method for Total Chlorine in Epoxy Resins and Compounds

    D4640 Standard Test Method for Determining Stroke Cure Time of Thermosetting Phenol-Formaldehyde Resins

    D5910 Standard Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography


    D01.31 - Pigment Specifications

    D1135 Standard Test Methods for Chemical Analysis of Blue Pigments

    D1199 Standard Specification for Calcium Carbonate Pigments

    D1208 Standard Test Methods for Common Properties of Certain Pigments

    D126 Standard Test Methods for Analysis of Yellow, Orange, and Green Pigments Containing Lead Chromate and Chromium Oxide Green

    D1301 Standard Test Methods for Chemical Analysis of White Lead Pigments

    D1366 Standard Practice for Reporting Particle Size Characteristics of Pigments

    D1394 Standard Test Methods for Chemical Analysis of White Titanium Pigments

    D153 Standard Test Methods for Specific Gravity of Pigments

    D1648 Standard Specification for Basic Lead Silicochromate Pigment

    D1649 Standard Specification for Strontium Chromate Pigment

    D1844 Standard Test Methods for Chemical Analysis of Basic Lead Silicochromate

    D1845 Standard Test Methods for Chemical Analysis of Strontium Chromate Pigment

    D185 Standard Test Methods for Coarse Particles in Pigments

    D209 Standard Specification for Lampblack Pigment

    D210 Standard Specification for Bone Black Pigment

    D211 Standard Specification for Chrome Yellow and Chrome Orange Pigments

    D2218 Standard Specification for Molybdate Orange Pigments

    D2448 Standard Test Method for Water-Soluble Salts in Pigments by Measuring the Specific Resistance of the Leachate of the Pigment

    D263 Standard Specification for Chrome Oxide Green Pigment

    D267 Standard Specification for Gold Bronze Powder

    D279 Standard Test Methods for Bleeding of Pigments

    D280 Standard Test Methods for Hygroscopic Moisture (and Other Matter Volatile Under the Test Conditions) in Pigments

    D283 Standard Test Methods for Chemical Analysis of Cuprous Oxide and Copper Pigments

    D3021 Standard Specification for Phthalocyanine Green Pigments

    D305 Standard Test Method for Solvent-Extractable Material in Black Pigments

    D3256 Standard Test Methods for Chemical Analysis of Phthalocyanine Blue and Green Pigments

    D3280 Standard Test Methods for Analysis of White Zinc Pigments

    D34 Standard Guide for Chemical Analysis of White Pigments

    D3720 Standard Test Method for Ratio of Anatase to Rutile in Titanium Dioxide Pigments by X-Ray Diffraction

    D3721 Standard Specification for Synthetic Red Iron Oxide Pigment

    D3722 Standard Specification for Natural Red and Brown Iron Oxide Pigments

    D3724 Standard Specification for Synthetic Brown Iron Oxide Pigment

    D3872 Standard Test Method for Ferrous Iron in Iron Oxides

    D3926 Standard Test Methods for Percent Solids in Titanium Dioxide Slurries

    D4139 Standard Guide for Determining Volatile and Nonvolatile Content of Pigments

    D4288 Standard Specification for Calcium Borosilicate Pigments

    D444 Standard Test Methods for Chemical Analysis of Zinc Yellow Pigment (Zinc Chromate Yellow)

    D4450 Standard Test Method for Analysis of Zinc Hydroxy Phosphite Pigment

    D4462 Standard Specification for Zinc Hydroxy Phosphite Pigment

    D4487 Standard Test Methods for Analysis of Calcium Borosilicate

    D476 Standard Classification for Dry Pigmentary Titanium Dioxide Products

    D478 Standard Specification for Zinc Yellow (Zinc Chromate) Pigments

    D480 Standard Test Methods for Sampling and Testing of Flaked Aluminum Powders and Pastes

    D49 Standard Test Methods of Chemical Analysis of Red Lead

    D50 Standard Test Methods for Chemical Analysis of Yellow, Orange, Red, and Brown Pigments Containing Iron and Manganese

    D520 Standard Specification for Zinc Dust Pigment

    D521 Standard Test Methods for Chemical Analysis of Zinc Dust (Metallic Zinc Powder)

    D561 Standard Specification for Carbon Black Pigment for Paint

    D602 Standard Specification for Barium Sulfate Pigments

    D605 Standard Specification for Magnesium Silicate Pigment (Talc)

    D607 Standard Specification for Wet Ground Mica Pigments

    D6280 Standard Specification for Zinc Phosphate Pigments

    D715 Standard Test Methods for Analysis of Barium Sulfate Pigment

    D716 Standard Test Methods for Evaluating Mica Pigment

    D717 Standard Test Methods for Analysis of Magnesium Silicate Pigment

    D718 Standard Test Methods for Analysis of Aluminum Silicate Pigment

    D763 Standard Specification for Raw and Burnt Umber Pigments

    D765 Standard Specification for Raw and Burnt Sienna Pigments

    D768 Standard Specification for Yellow Iron Oxide Hydrated

    D769 Standard Specification for Black Synthetic Iron Oxide

    D79 Standard Specification for Zinc Oxide Pigments

    D81 Standard Specification for Basic Carbonate White Lead Pigment

    D83 Standard Specification for Red Lead Pigment

    D85 Standard Specification for Ochre Pigment

    D962 Standard Specification for Aluminum Powder and Paste Pigments for Paints

    D964 Standard Specification for Metallic Copper Powder for Use in Antifouling Paints


    D01.27 - Accelerated Testing

    D1006/D1006M Standard Practice for Conducting Exterior Exposure Tests of Paints on Wood

    D1014 Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates

    D1735 Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus

    D2201 Standard Practice for Preparation of Zinc-Coated and Zinc-Alloy-Coated Steel Panels for Testing Paint and Related Coating Products

    D2247 Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity

    D2248 Standard Practice for Detergent Resistance of Organic Finishes

    D2454 Standard Practice for Determining the Effect of Overbaking on Organic Coatings

    D2485 Standard Test Methods for Evaluating Coatings For High Temperature Service

    D2803 Standard Guide for Testing Filiform Corrosion Resistance of Organic Coatings on Metal

    D3361/D3361M Standard Practice for Unfiltered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings

    D3891 Standard Practice for Preparation of Glass Panels for Testing Paint, Varnish, Lacquer, and Related Products

    D4141/D4141M Standard Practice for Conducting Black Box and Solar Concentrating Exposures of Coatings

    D4585/D4585M Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation

    D4587 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings

    D5031/D5031M Standard Practice for Enclosed Carbon-Arc Exposure Tests of Paint and Related Coatings

    D5722 Standard Practice for Performing Accelerated Outdoor Weathering of Factory-Coated Embossed Hardboard Using Concentrated Natural Sunlight and a Soak-Freeze-Thaw Procedure

    D5894 Standard Practice for Cyclic Salt Fog/UV Exposure of Painted Metal, (Alternating Exposures in a Fog/Dry Cabinet and a UV/Condensation Cabinet)

    D609 Standard Practice for Preparation of Cold-Rolled Steel Panels for Testing Paint, Varnish, Conversion Coatings, and Related Coating Products

    D6675 Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel

    D6695 Standard Practice for Xenon-Arc Exposures of Paint and Related Coatings

    D7356/D7356M Standard Test Method for Accelerated Acid Etch Weathering of Automotive Clearcoats Using a Xenon-Arc Exposure Device

    D7869 Standard Practice for Xenon Arc Exposure Test with Enhanced Light and Water Exposure for Transportation Coatings

    D822/D822M Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings

    D870 Standard Practice for Testing Water Resistance of Coatings Using Water Immersion


    D01.24 - Physical Properties of Liquid Paints & Paint Materials

    D1200 Standard Test Method for Viscosity by Ford Viscosity Cup

    D1210 Standard Test Method for Fineness of Dispersion of Pigment-Vehicle Systems by Hegman-Type Gage

    D1331 Standard Test Methods for Surface and Interfacial Tension of Solutions of Paints, Solvents, Solutions of Surface-Active Agents, and Related Materials

    D1475 Standard Test Method For Density of Liquid Coatings, Inks, and Related Products

    D1483 Standard Test Method for Oil Absorption of Pigments by Gardner-Coleman Method

    D1545 Standard Test Method for Viscosity of Transparent Liquids by Bubble Time Method

    D2196 Standard Test Methods for Rheological Properties of Non-Newtonian Materials by Rotational Viscometer

    D2337 Standard Test Method for Freeze-Thaw Stability of Multicolor Lacquers

    D281 Standard Test Method for Oil Absorption of Pigments by Spatula Rub-out

    D3539 Standard Test Methods for Evaporation Rates of Volatile Liquids by Shell Thin-Film Evaporometer

    D4144 Standard Test Method for Estimating Package Stability of Coatings for Ultraviolet Curing

    D4212 Standard Test Method for Viscosity by Dip-Type Viscosity Cups

    D4287 Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer

    D5125 Standard Test Method for Viscosity of Paints and Related Materials by ISO Flow Cups

    D5201 Standard Practice for Calculating Formulation Physical Constants of Paints and Coatings

    D5478 Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer

    D562 Standard Test Method for Consistency of Paints Measuring Krebs Unit (KU) Viscosity Using a Stormer-Type Viscometer

    D5682 Standard Test Methods for Electrical Resistivity of Liquid Paint and Related Materials

    D6165 Standard Guide for the Comparison, Detection, and Identification of the Odors of Paints, Inks, and Related Materials

    D6619 Standard Practice for Incorporating Pigments by High Speed Dispersion

    D7394 Standard Practice for Rheological Characterization of Architectural Coatings using Three Rotational Bench Viscometers

    D7395 Standard Test Method for Cone/Plate Viscosity at a 500 s-1 Shear Rate

    D7540 Standard Practice for Dispersion of Chromatic Pigments with a Mechanical Muller

    D7836 Standard Test Methods for Measurement of Yield Stress of Paints, Inks and Related Liquid Materials

    D7867 Standard Test Methods for Measurement of the Rotational Viscosity of Paints, Inks and Related Liquid Materials as a Function of Temperature

    D869 Standard Test Method for Evaluating Degree of Settling of Paint


    D01.23 - Physical Properties of Applied Paint Films

    D1005 Standard Test Method for Measurement of Dry-Film Thickness of Organic Coatings Using Micrometers

    D1212 Standard Test Methods for Measurement of Wet Film Thickness of Organic Coatings

    D1474/D1474M Standard Test Methods for Indentation Hardness of Organic Coatings

    D1640/D1640M Standard Test Methods for Drying, Curing, or Film Formation of Organic Coatings

    D1653 Standard Test Methods for Water Vapor Transmission of Organic Coating Films

    D2134 Standard Test Method for Determining the Hardness of Organic Coatings with a Sward-Type Hardness Rocker

    D2197 Standard Test Method for Adhesion of Organic Coatings by Scrape Adhesion

    D2370 Standard Test Method for Tensile Properties of Organic Coatings

    D2794 Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)

    D3359 Standard Test Methods for Measuring Adhesion by Tape Test

    D3363 Standard Test Method for Film Hardness by Pencil Test

    D4060 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser

    D4138 Standard Practices for Measurement of Dry Film Thickness of Protective Coating Systems by Destructive, Cross-Sectioning Means

    D4366 Standard Test Methods for Hardness of Organic Coatings by Pendulum Damping Tests

    D4414 Standard Practice for Measurement of Wet Film Thickness by Notch Gages

    D4708 Standard Practice for Preparation of Uniform Free Films of Organic Coatings

    D5178 Standard Test Method for Mar Resistance of Organic Coatings

    D5179 Standard Test Method for Measuring Adhesion of Organic Coatings to Plastic Substrates by Direct Tensile Testing

    D522/D522M Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings

    D5895 Standard Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders

    D6037 Standard Test Methods for Dry Abrasion Mar Resistance of High Gloss Coatings

    D6132 Standard Test Method for Nondestructive Measurement of Dry Film Thickness of Applied Organic Coatings Using an Ultrasonic Coating Thickness Gage

    D6905 Standard Test Method for Impact Flexibility of Organic Coatings

    D6991 Standard Test Method for Measurements of Internal Stresses in Organic Coatings by Cantilever (Beam) Method

    D7091 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals

    D7187 Standard Test Method for Measuring Mechanistic Aspects of Scratch/Mar Behavior of Paint Coatings by Nanoscratching

    D7334 Standard Practice for Surface Wettability of Coatings, Substrates and Pigments by Advancing Contact Angle Measurement

    D7490 Standard Test Method for Measurement of the Surface Tension of Solid Coatings, Substrates and Pigments using Contact Angle Measurements

    D7541 Standard Practice for Estimating Critical Surface Tensions

    D823 Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels

    D968 Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive


    D01.21 - Chemical Analysis of Paints and Paint Materials

    D1259 Standard Test Methods for Nonvolatile Content of Resin Solutions

    D1310 Standard Test Method for Flash Point and Fire Point of Liquids by Tag Open-Cup Apparatus

    D1360 Standard Test Method for Fire Retardancy of Paints (Cabinet Method)

    D1644 Standard Test Methods for Nonvolatile Content of Varnishes

    D1978 Standard Guide for Analysis of Electrocoat Bath Samples

    D2245 Standard Test Method for Identification of Oils and Oil Acids in Solvent-Reducible Paints

    D2349 Standard Test Method for Qualitative Determination of Nature of Solvent Composition in Solvent-Reducible Paints

    D2350 Standard Test Method for Antimony Oxide in White Pigment Separated From Solvent-Reducible Paints

    D2351 Standard Test Method for Sulfide in White Pigment Separated from Solvent-Reducible Paints

    D2352 Standard Test Method for Sulfur Dioxide in White Pigment Separated from Solvent-Reducible Paints

    D2369 Standard Test Method for Volatile Content of Coatings

    D2371 Standard Test Method for Pigment Content of Solvent-Reducible Paints

    D2372 Standard Practice for Separation of Vehicle From Solvent-Reducible Paints

    D2373 Standard Test Method for Determination of Cobalt in Paint Driers by EDTA Method

    D2374 Standard Test Method for Lead in Paint Driers by EDTA Method

    D2375 Standard Test Method for Manganese in Paint Driers by EDTA Method

    D2613 Standard Test Method for Calcium or Zinc in Paint Driers by EDTA Method

    D2621 Standard Test Method for Infrared Identification of Vehicle Solids From Solvent-Reducible Paints

    D2697 Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings

    D2698 Standard Test Method for Determination of the Pigment Content of Solvent-Reducible Paints by High-Speed Centrifuging

    D2832 Standard Guide for Determining Volatile and Nonvolatile Content of Paint and Related Coatings

    D3168 Standard Practice for Qualitative Identification of Polymers in Emulsion Paints

    D3271 Standard Practice for Direct Injection of Solvent-Reducible Paints Into a Gas Chromatograph for Solvent Analysis

    D3278 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus

    D3335 Standard Test Method for Low Concentrations of Lead, Cadmium, and Cobalt in Paint by Atomic Absorption Spectroscopy

    D3618 Standard Test Method for Detection of Lead in Paint and Dried Paint Films

    D3624 Standard Test Method for Low Concentrations of Mercury in Paint by Atomic Absorption Spectroscopy

    D3717 Standard Test Method for Low Concentrations of Antimony in Paint by Atomic Absorption Spectroscopy

    D3718 Standard Test Method for Low Concentrations of Chromium in Paint by Atomic Absorption Spectroscopy

    D3723 Standard Test Method for Pigment Content of Water-Emulsion Paints by Low-Temperature Ashing

    D3792 Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph

    D3804 Standard Test Method for Iron in Paint Driers by EDTA Method

    D3806 Standard Test Method of Small-Scale Evaluation of Fire-Retardant Paints (2-Foot Tunnel Method)

    D3925 Standard Practice for Sampling Liquid Paints and Related Pigmented Coatings

    D3934 Standard Test Method for Flash/No Flash Test—Equilibrium Method by a Closed-Cup Apparatus

    D3941 Standard Test Method for Flash Point by the Equilibrium Method With a Closed-Cup Apparatus

    D3960 Standard Practice for Determining Volatile Organic Compound (VOC)Content of Paints and Related Coatings

    D3969 Standard Test Method for Zirconium in Paint Driers by EDTA Method

    D3970 Standard Test Method for Cerium in Paint Driers by Oxidimetric Determination

    D3988 Standard Test Method for Vanadium in Paint Driers by EDTA Method

    D3989 Standard Test Method for Total Rare Earth Metals in Paint Driers by EDTA Method

    D4017 Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method

    D4140 Standard Guide for Determining Volatile and Nonvolatile Content of Driers, Drying Oils, Naval Stores, and Solvents

    D4206 Standard Test Method for Sustained Burning of Liquid Mixtures Using the Small Scale Open-Cup Apparatus

    D4209 Standard Practice for Determining Volatile and Nonvolatile Content of Cellulosics, Emulsions, Resin Solutions, Shellac, and Varnishes

    D4359 Standard Test Method for Determining Whether a Material Is a Liquid or a Solid

    D4370 Standard Test Methods for Acid and Base Milliequivalent Content of Electrocoat Bath

    D4399 Standard Test Method for Measuring Electrical Conductivity of Electrocoat Baths

    D4451 Standard Test Method for Pigment Content of Paints by Low-Temperature Ashing

    D4457 Standard Test Method for Determination of Dichloromethane and 1,1,1-Trichloroethane in Paints and Coatings by Direct Injection into a Gas Chromatograph

    D4563 Standard Test Method for Determination by Atomic Absorption Spectroscopy of Titanium Dioxide Content of Pigments Recovered From Whole Paint

    D4584 Standard Test Method for Measuring Apparent pH of Electrocoat Baths

    D4747 Standard Test Method for Determining Unreacted Monomer Content of Latexes Using Gas-Liquid Chromatography

    D4764 Standard Test Method for Determination by X-ray Fluorescence Spectroscopy of Titanium Dioxide Content in Paint

    D4827 Standard Test Method for Determining the Unreacted Monomer Content of Latexes Using Capillary Column Gas Chromatography

    D4834 Standard Test Method for Detection of Lead in Paint by Direct Aspiration Atomic Absorption Spectroscopy

    D4948 Standard Test Method for Determination of the Upper Layer Separated from a Viscous Liquid

    D5087 Standard Test Method for Determining Amount of Volatile Organic Compound (VOC) Released from Solventborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)

    D5145 Standard Test Methods for Nonvolatile and Pigment Content of Electrocoat Baths

    D5200 Standard Test Method for Determination of Weight Percent Volatile Content of Solvent-Borne Paints in Aerosol Cans

    D5325 Standard Test Method for Determination of Weight Percent Volatile Content of Water-Borne Aerosol Paints

    D5380 Standard Test Method for Identification of Crystalline Pigments and Extenders in Paint by X-Ray Diffraction Analysis

    D5381 Standard Guide for X-Ray Fluorescence (XRF) Spectroscopy of Pigments and Extenders

    D564 Standard Test Methods for Liquid Paint Driers

    D5794 Standard Guide for Determination of Anions in Cathodic Electrocoat Permeates by Ion Chromatography

    D6093 Standard Test Method for Percent Volume Nonvolatile Matter in Clear or Pigmented Coatings Using a Helium Gas Pycnometer

    D6133 Standard Test Method for Acetone, p-Chlorobenzotrifluoride, Methyl Acetate or t-Butyl Acetate Content of Solventborne and Waterborne Paints, Coatings, Resins, and Raw Materials by Direct Injection Into a Gas Chromatograph

    D6191 Standard Test Method for Measurement of Evolved Formaldehyde from Water Reducible Air-Dry Coatings

    D6266 Test Method for Determining the Amount of Volatile Organic Compound (VOC) Released From Waterborne Automotive Coatings and Available for Removal in a VOC Control Device (Abatement)

    D6438 Standard Test Method for Acetone, Methyl Acetate, and Parachlorobenzotrifluoride Content of Paints, and Coatings by Solid Phase Microextraction-Gas Chromatography

    D6580 Standard Test Method for the Determination of Metallic Zinc Content in Both Zinc Dust Pigment and in Cured Films of Zinc-Rich Coatings

    D6886 Standard Test Method for Determination of the Weight Percent Individual Volatile Organic Compounds in Waterborne Air-Dry Coatings by Gas Chromatography

    D6902 Standard Test Method for Laboratory Measurement of Formaldehyde Evolved During the Curing of Melamine-Formaldehyde-Based Coatings

    D7232 Standard Test Method for Rapid Determination of the Nonvolatile Content of Coatings by Loss in Weight

    D7245 Standard Test Method for Measuring Total Water and Volatiles in Liquid Coatings Which Produce Cure Water Upon Heating

    D7358 Standard Test Method for Water Content of Paints by Quantitative Calcium Hydride Reaction Test Kit

    D7588 Standard Guide for FT-IR Fingerprinting of a Non-Aqueous Liquid Paint as Supplied in the Manufacturer's Container

    D7767 Standard Test Method to Measure Volatiles from Radiation Curable Acrylate Monomers, Oligomers, and Blends and Thin Coatings Made from Them

    D7768 Standard Test Method for Speciated Organic Volatile Content of Waterborne Multi-Component Coatings by Gas Chromatography

    E848 Standard Guide for Safety and Health Requirements Relating to Occupational Exposure to Water-Insoluble Chromates


    C28.03 - Physical Properties and Non-Destructive Evaluation

    C1070 Standard Test Method for Determining Particle Size Distribution of Alumina or Quartz by Laser Light Scattering

    C1175 Standard Guide to Test Methods and Standards for Nondestructive Testing of Advanced Ceramics

    C1212 Standard Practice for Fabricating Ceramic Reference Specimens Containing Seeded Voids

    C1274 Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption

    C1331 Standard Test Method for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cross-Correlation Method

    C1332 Standard Test Method for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique

    C1336 Standard Practice for Fabricating Non-Oxide Ceramic Reference Specimens Containing Seeded Inclusions

    C1470 Standard Guide for Testing the Thermal Properties of Advanced Ceramics

    C1494 Standard Test Methods for Determination of Mass Fraction of Carbon, Nitrogen, and Oxygen in Silicon Nitride Powder

    C1678 Standard Practice for Fractographic Analysis of Fracture Mirror Sizes in Ceramics and Glasses


    C28.01 - Mechanical Properties and Performance

    C1161 Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature

    C1198 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Sonic Resonance

    C1211 Standard Test Method for Flexural Strength of Advanced Ceramics at Elevated Temperatures

    C1239 Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics

    C1259 Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration

    C1273 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures

    C1291 Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time-to-Failure for Advanced Monolithic Ceramics

    C1322 Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics

    C1326 Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics

    C1327 Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics

    C1361 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures

    C1366 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures

    C1368 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Strength Testing at Ambient Temperature

    C1421 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature

    C1424 Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature

    C1465 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures

    C1495 Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics

    C1499 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature

    C1525 Standard Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching

    C1576 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Ambient Temperature

    C1683 Standard Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics

    C1684 Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature—Cylindrical Rod Strength


    C26.10 - Non Destructive Assay

    C1030 Standard Test Method for Determination of Plutonium Isotopic Composition by Gamma-Ray Spectrometry

    C1133/C1133M Standard Test Method for Nondestructive Assay of Special Nuclear Material in Low Density Scrap and Waste by Segmented Passive Gamma-Ray Scanning

    C1207 Standard Test Method for Nondestructive Assay of Plutonium in Scrap and Waste by Passive Neutron Coincidence Counting

    C1221 Standard Test Method for Nondestructive Analysis of Special Nuclear Materials in Homogeneous Solutions by Gamma-Ray Spectrometry

    C1316 Standard Test Method for Nondestructive Assay of Nuclear Material in Scrap and Waste by Passive-Active Neutron Counting Using 252Cf Shuffler

    C1455 Standard Test Method for Nondestructive Assay of Special Nuclear Material Holdup Using Gamma-Ray Spectroscopic Methods

    C1458 Standard Test Method for Nondestructive Assay of Plutonium, Tritium and 241Am by Calorimetric Assay

    C1490 Standard Guide for the Selection, Training and Qualification of Nondestructive Assay (NDA) Personnel

    C1493 Standard Test Method for Non-Destructive Assay of Nuclear Material in Waste by Passive and Active Neutron Counting Using a Differential Die-Away System

    C1500 Standard Test Method for Nondestructive Assay of Plutonium by Passive Neutron Multiplicity Counting

    C1514 Standard Test Method for Measurement of 235U Fraction Using Enrichment Meter Principle

    C1592/C1592M Standard Guide for Making Quality Nondestructive Assay Measurements

    C1673 Standard Terminology of C26.10 Nondestructive Assay Methods

    C1718 Standard Test Method for Nondestructive Assay of Radioactive Material by Tomographic Gamma Scanning

    C1726/C1726M Standard Guide for Use of Modeling for Passive Gamma Measurements

    C1807 Standard Guide for Nondestructive Assay of Special Nuclear Material (SNM) Holdup Using Passive Neutron Measurement Methods


    C26.05 - Methods of Test

    C1000 Standard Test Method for Radiochemical Determination of Uranium Isotopes in Soil by Alpha Spectrometry

    C1001 Standard Test Method for Radiochemical Determination of Plutonium in Soil by Alpha Spectroscopy

    C1022 Standard Test Methods for Chemical and Atomic Absorption Analysis of Uranium-Ore Concentrate

    C1108 Standard Test Method for Plutonium by Controlled-Potential Coulometry

    C1109 Standard Practice for Analysis of Aqueous Leachates from Nuclear Waste Materials Using Inductively Coupled Plasma-Atomic Emission Spectrometry

    C1111 Standard Test Method for Determining Elements in Waste Streams by Inductively Coupled Plasma-Atomic Emission Spectroscopy

    C1163 Standard Practice for Mounting Actinides for Alpha Spectrometry Using Neodymium Fluoride

    C1165 Standard Test Method for Determining Plutonium by Controlled-Potential Coulometry in H2SO4 at a Platinum Working Electrode

    C1168 Standard Practice for Preparation and Dissolution of Plutonium Materials for Analysis

    C1204 Standard Test Method for Uranium in Presence of Plutonium by Iron(II) Reduction in Phosphoric Acid Followed by Chromium(VI) Titration

    C1205 Standard Test Method for The Radiochemical Determination of Americium-241 in Soil by Alpha Spectrometry

    C1206 Standard Test Method for Plutonium by Iron (II)/Chromium (VI) Amperometric Titration

    C1219 Standard Test Methods for Arsenic in Uranium Hexafluoride

    C1254 Standard Test Method for Determination of Uranium in Mineral Acids by X-Ray Fluorescence

    C1255 Standard Test Method for Analysis of Uranium and Thorium in Soils by Energy Dispersive X-Ray Fluorescence Spectroscopy

    C1267 Standard Test Method for Uranium by Iron (II) Reduction in Phosphoric Acid Followed by Chromium (VI) Titration in the Presence of Vanadium

    C1268 Standard Test Method for Quantitative Determination of Americium 241 in Plutonium by Gamma-Ray Spectrometry

    C1284 Standard Practice for Electrodeposition of the Actinides for Alpha Spectrometry

    C1287 Standard Test Method for Determination of Impurities in Nuclear Grade Uranium Compounds by Inductively Coupled Plasma Mass Spectrometry

    C1295 Standard Test Method for Gamma Energy Emission from Fission and Decay Products in Uranium Hexafluoride and Uranyl Nitrate Solution

    C1307 Standard Test Method for Plutonium Assay by Plutonium (III) Diode Array Spectrophotometry

    C1343 Standard Test Method for Determination of Low Concentrations of Uranium in Oils and Organic Liquids by X-ray Fluorescence

    C1344 Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Mass Spectrometer Method

    C1345 Standard Test Method for Analysis of Total and Isotopic Uranium and Total Thorium in Soils by Inductively Coupled Plasma-Mass Spectrometry

    C1346 Standard Practice for Dissolution of UF6 from P-10 Tubes

    C1347 Standard Practice for Preparation and Dissolution of Uranium Materials for Analysis

    C1379 Standard Test Method for Analysis of Urine for Uranium-235 and Uranium-238 Isotopes by Inductively Coupled Plasma-Mass Spectrometry

    C1380 Standard Test Method for Determination of Uranium Content and Isotopic Composition by Isotope Dilution Mass Spectrometry

    C1387 Standard Guide for the Determination of Technetium-99 in Soil

    C1402 Standard Guide for High-Resolution Gamma-Ray Spectrometry of Soil Samples

    C1408 Standard Test Method for Carbon (Total) in Uranium Oxide Powders and Pellets By Direct Combustion-Infrared Detection Method

    C1411 Standard Practice for The Ion Exchange Separation of Uranium and Plutonium Prior to Isotopic Analysis

    C1413 Standard Test Method for Isotopic Analysis of Hydrolyzed Uranium Hexafluoride and Uranyl Nitrate Solutions by Thermal Ionization Mass Spectrometry

    C1414 Standard Practice for The Separation of Americium from Plutonium by Ion Exchange

    C1415 Standard Test Method for 238Pu Isotopic Abundance By Alpha Spectrometry

    C1428 Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Single-Standard Gas Source Multiple Collector Mass Spectrometer Method

    C1429 Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Double-Standard Multi-Collector Gas Mass Spectrometer

    C1430 Standard Test Method for Determination of Uranium, Oxygen to Uranium (O/U), and Oxygen to Metal (O/M) in Sintered Uranium Dioxide and Gadolinia-Uranium Dioxide Pellets by Atmospheric Equilibration

    C1432 Standard Test Method for Determination of Impurities in Plutonium: Acid Dissolution, Ion Exchange Matrix Separation, and Inductively Coupled Plasma-Atomic Emission Spectroscopic (ICP/AES) Analysis

    C1441 Standard Test Method for the Analysis of Refrigerant 114, Plus Other Carbon-Containing and Fluorine-Containing Compounds in Uranium Hexafluoride via Fourier-Transform Infrared (FTIR) Spectroscopy

    C1453 Standard Test Method for the Determination of Uranium by Ignition and the Oxygen to Uranium (O/U) Atomic Ratio of Nuclear Grade Uranium Dioxide Powders and Pellets

    C1456 Standard Test Method for Determination of Uranium or Gadolinium (or both) in Gadolinium Oxide-Uranium Oxide Pellets or by X-Ray Fluorescence (XRF)

    C1457 Standard Test Method for the Determination of Total Hydrogen Content of Uranium Oxide Powders and Pellets by Carrier Gas Extraction

    C1463 Standard Practices for Dissolving Glass Containing Radioactive and Mixed Waste for Chemical and Radiochemical Analysis

    C1473 Standard Test Method for Radiochemical Determination of Uranium Isotopes in Urine by Alpha Spectrometry

    C1474 Standard Test Method for Analysis of Isotopic Composition of Uranium in Nuclear-Grade Fuel Material by Quadrupole Inductively Coupled Plasma-Mass Spectrometry

    C1475 Standard Guide for Determination of Neptunium-237 in Soil

    C1477 Standard Test Method for Isotopic Abundance Analysis of Uranium Hexafluoride and Uranyl Nitrate Solutions by Multi-Collector, Inductively Coupled Plasma-Mass Spectrometry

    C1502 Standard Test Method for Determination of Total Chlorine and Fluorine in Uranium Dioxide and Gadolinium Oxide

    C1507 Standard Test Method for Radiochemical Determination of Strontium-90 in Soil

    C1508 Standard Test Method for Determination of Bromine and Chlorine in UF6 and Uranyl Nitrate by X-Ray Fluorescence (XRF) Spectroscopy

    C1517 Standard Test Method for Determination of Metallic Impurities in Uranium Metal or Compounds by DC-Arc Emission Spectroscopy

    C1539 Standard Test Method for Determination of Technetium-99 in Uranium Hexafluoride by Liquid Scintillation Counting

    C1561 Standard Guide for Determination of Plutonium and Neptunium in Uranium Hexafluoride by Alpha Spectrometry

    C1590 Standard Practice for Alternate Actinide Calibration for Inductively Coupled Plasma-Mass Spectrometry

    C1614 Standard Practice for the Determination of 237Np, 232Th, 235U and 238U in Urine by Inductively Coupled Plasma-Mass Spectrometry (ICP-MS) and Gamma Ray Spectrometry.

    C1625 Standard Test Method for Uranium and Plutonium Concentrations and Isotopic Abundances by Thermal Ionization Mass Spectrometry

    C1636 Standard Guide for the Determination of Uranium-232 in Uranium Hexafluoride

    C1637 Standard Test Method for the Determination of Impurities in Plutonium Metal: Acid Digestion and Inductively Coupled Plasma-Mass Spectroscopy (ICP-MS) Analysis

    C1638 Standard Guide for the Determination of Iodine-129 In Uranium Oxide

    C1647 Standard Practice for Removal of Uranium or Plutonium, or both, for Impurity Assay in Uranium or Plutonium Materials

    C1672 Standard Test Method for Determination of Uranium or Plutonium Isotopic Composition or Concentration by the Total Evaporation Method Using a Thermal Ionization Mass Spectrometer

    C1689 Standard Practice for Subsampling of Uranium Hexafluoride

    C1742 Standard Test Method for Isotopic Analysis of Uranium Hexafluoride by Double Standard Single-Collector Gas Mass Spectrometer Method

    C1770 Standard Test Method for Determination of Loose and Tapped Bulk Density of Plutonium Oxide

    C1771 Standard Test Method for Determination of Boron, Silicon, and Technetium in Hydrolyzed Uranium Hexafluoride by Inductively Coupled Plasma—Mass Spectrometer After Removal of Uranium by Solid Phase Extraction

    C696 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Uranium Dioxide Powders and Pellets

    C697 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets

    C698 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Mixed Oxides ((U, Pu)O2)

    C758 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Metal

    C759 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Plutonium Nitrate Solutions

    C761 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Uranium Hexafluoride

    C799 Standard Test Methods for Chemical, Mass Spectrometric, Spectrochemical, Nuclear, and Radiochemical Analysis of Nuclear-Grade Uranyl Nitrate Solutions

    C889 Standard Test Methods for Chemical and Mass Spectrometric Analysis of Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder

    C968 Standard Test Methods for Analysis of Sintered Gadolinium Oxide-Uranium Dioxide Pellets

    C998 Standard Practice for Sampling Surface Soil for Radionuclides

    C999 Standard Practice for Soil Sample Preparation for the Determination of Radionuclides

    E321 Standard Test Method for Atom Percent Fission in Uranium and Plutonium Fuel (Neodymium-148 Method)


    C26.03 - Neutron Absorber Materials Specifications

    C1031 Standard Specification for Nuclear-Grade Aluminum Oxide Powder

    C1065 Standard Specification for Nuclear-Grade Zirconium Oxide Powder

    C1066 Standard Specification for Nuclear Grade Zirconium Oxide Pellets

    C1076 Standard Specification for Nuclear Grade Hafnium Oxide Pellets

    C1098 Standard Specification for Nuclear-Grade Hafnium Oxide Powder

    C1187 Standard Guide for Establishing Surveillance Test Program for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Spent Fuel Storage Racks

    C1671 Standard Practice for Qualification and Acceptance of Boron Based Metallic Neutron Absorbers for Nuclear Criticality Control for Dry Cask Storage Systems and Transportation Packaging

    C708 Specification for Nuclear-Grade Beryllium Oxide Powder

    C750 Standard Specification for Nuclear-Grade Boron Carbide Powder

    C751 Standard Specification for Nuclear-Grade Boron Carbide Pellets

    C752 Standard Specification for Nuclear-Grade Silver-Indium-Cadmium Alloy

    C760 Standard Test Methods for Chemical and Spectrochemical Analysis of Nuclear-Grade Silver-Indium-Cadmium Alloys

    C784 Standard Specification for Nuclear-Grade Aluminum Oxide-Boron Carbide Composite Pellets

    C785 Standard Specification for Nuclear-Grade Aluminum Oxide Pellets

    C791 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Boron Carbide

    C809 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Aluminum Oxide and AluminumOxide-Boron Carbide Composite Pellets

    C888 Standard Specification for Nuclear-Grade Gadolinium Oxide (Gd2O3) Powder

    C992 Standard Specification for Boron-Based Neutron Absorbing Material Systems for Use in Nuclear Spent Fuel Storage Racks


    C26.02 - Fuel and Fertile Material Specifications

    C1052 Standard Practice for Bulk Sampling of Liquid Uranium Hexafluoride

    C1075 Standard Practices for Sampling Uranium-Ore Concentrate

    C1233 Standard Practice for Determining Equivalent Boron Contents of Nuclear Materials

    C1334 Standard Specification for Uranium Oxides with a 235U Content of Less Than 5 % for Dissolution Prior to Conversion to Nuclear-Grade Uranium Dioxide

    C1462 Standard Specification for Uranium Metal Enriched to More than 15 % and Less Than 20 % 235U

    C1703 Standard Practice for Sampling of Gaseous Uranium Hexafluoride

    C753 Standard Specification for Nuclear-Grade, Sinterable Uranium Dioxide Powder

    C757 Standard Specification for Nuclear-Grade Plutonium Dioxide Powder, Sinterable

    C776 Standard Specification for Sintered Uranium Dioxide Pellets

    C787 Standard Specification for Uranium Hexafluoride for Enrichment

    C788 Standard Specification for Nuclear-Grade Uranyl Nitrate Solution or Crystals

    C833 Standard Specification for Sintered (Uranium-Plutonium) Dioxide Pellets

    C922 Standard Specification for Sintered Gadolinium Oxide-Uranium Dioxide Pellets

    C967 Standard Specification for Uranium Ore Concentrate

    C996 Standard Specification for Uranium Hexafluoride Enriched to Less Than 5 % 235U


    C24.20 - General Test Methods

    C1016 Standard Test Method for Determination of Water Absorption of Sealant Backing (Joint Filler) Material

    C1087 Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems

    C1183/C1183M Standard Test Method for Extrusion Rate of Elastomeric Sealants

    C1241 Standard Test Method for Volume Shrinkage of Latex Sealants During Cure

    C1246 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure

    C1253 Standard Test Method for Determining the Outgassing Potential of Sealant Backing

    C1266 Standard Test Method for Flow Characteristics of Preformed Tape Sealants

    C1294 Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials

    C1681 Standard Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain

    C1735 Standard Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation

    C603 Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants

    C639 Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants

    C661 Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer

    C679 Standard Test Method for Tack-Free Time of Elastomeric Sealants

    C681 Standard Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds

    C711 Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants

    C712 Standard Test Method for Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants

    C731 Standard Test Method for Extrudability, After Package Aging, of Latex Sealants

    C765 Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants

    C771 Standard Test Method for Weight Loss After Heat Aging of Preformed Tape Sealants

    C772 Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants

    C782 Standard Test Method for Softness of Preformed Tape Sealants

    C792 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants

    C879 Standard Test Methods for Release Papers Used with Preformed Tape Sealants

    C972 Standard Test Method for Compression-Recovery of Tape Sealant

    D2202 Standard Test Method for Slump of Sealants

    D2203 Standard Test Method for Staining from Sealants

    D2377 Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants

    D2452 Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds

    D2453 Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds


    C24.10 - Specifications, Guides and Practices

    C1021 Standard Practice for Laboratories Engaged in Testing of Building Sealants

    C1184 Standard Specification for Structural Silicone Sealants

    C1193 Standard Guide for Use of Joint Sealants

    C1249 Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications

    C1281 Standard Specification for Preformed Tape Sealants for Glazing Applications

    C1311 Standard Specification for Solvent Release Sealants

    C1330 Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants

    C1369 Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units

    C1375 Standard Guide for Substrates Used in Testing Building Seals and Sealants

    C1392 Standard Guide for Evaluating Failure of Structural Sealant Glazing

    C1394 Standard Guide for In-Situ Structural Silicone Glazing Evaluation

    C1401 Standard Guide for Structural Sealant Glazing

    C1472 Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width

    C1481 Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)

    C1487 Standard Guide for Remedying Structural Silicone Glazing

    C1518 Standard Specification for Precured Elastomeric Silicone Joint Sealants

    C1520 Standard Guide for Paintability of Latex Sealants

    C1564 Standard Guide for Use of Silicone Sealants for Protective Glazing Systems

    C1756 Standard Guide for Comparing Sealant Behavior to Reference Photographs

    C834 Standard Specification for Latex Sealants

    C919 Standard Practice for Use of Sealants in Acoustical Applications

    C920 Standard Specification for Elastomeric Joint Sealants


    C21.04 - Raw Materials

    C1069 Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption

    C1182 Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation

    C322 Standard Practice for Sampling Ceramic Whiteware Clays

    C323 Standard Test Methods for Chemical Analysis of Ceramic Whiteware Clays

    C324 Standard Test Method for Free Moisture in Ceramic Whiteware Clays

    C325 Standard Guide for Wet Sieve Analysis of Ceramic Whiteware Clays

    C326 Standard Test Method for Drying and Firing Shrinkages of Ceramic Whiteware Clays

    C371 Standard Test Method for Wire-Cloth Sieve Analysis of Nonplastic Ceramic Powders

    C689 Standard Test Method for Modulus of Rupture of Unfired Clays

    C690 Standard Test Method for Particle Size Distribution of Alumina or Quartz Powders by Electrical Sensing Zone Technique

    C721 Standard Test Methods for Estimating Average Particle Size of Alumina and Silica Powders by Air Permeability

    C837 Standard Test Method for Methylene Blue Index of Clay

    C866 Standard Test Method for Filtration Rate of Ceramic Whiteware Clays

    C867 Standard Test Method for Soluble Sulfate in Ceramic Whiteware Clays (Photometric Method)

    C925 Standard Guide for Precision Electroformed Wet Sieve Analysis of Nonplastic Ceramic Powders

    C958 Standard Test Method for Particle Size Distribution of Alumina or Quartz by X-Ray Monitoring of Gravity Sedimentation


    C21.03 - Methods for Whitewares and Environmental Concerns

    C1023 Standard Practice for Labeling Ceramic Art Materials for Chronic Adverse Health Hazards

    C1300 Standard Test Method for Linear Thermal Expansion of Glaze Frits and Ceramic Whiteware Materials by the Interferometric Method

    C1466 Standard Test Method for Graphite Furnace Atomic Absorption Spectrometric Determination of Lead and Cadmium Extracted from Ceramic Foodware

    C1510 Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry

    C1545 Practice for Dispersing Pigments and Other Materials into Water-Based Suspensions with a High Intensity Mixer

    C1605 Standard Test Methods for Chemical Analysis of Ceramic Whiteware Materials Using Wavelength Dispersive X-Ray Fluorescence Spectrometry

    C1606 Standard Test Method for Sampling Protocol for TCLP Testing of Container Glassware

    C1607 Standard Test Method for Determination of “Microwave Safe for Reheating” for Ceramicware

    C329 Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials

    C368 Standard Test Method for Impact Resistance of Ceramic Tableware

    C370 Standard Test Method for Moisture Expansion of Fired Whiteware Products

    C372 Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by the Dilatometer Method

    C373 Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity of Fired Whiteware Products, Ceramic Tiles, and Glass Tiles

    C408 Standard Test Method for Thermal Conductivity of Whiteware Ceramics

    C424 Standard Test Method for Crazing Resistance of Fired Glazed Whitewares by Autoclave Treatment

    C554 Standard Test Method for Crazing Resistance of Fired Glazed Ceramic Whitewares by a Thermal Shock Method

    C584 Standard Test Method for Specular Gloss of Glazed Ceramic Whitewares and Related Products

    C674 Standard Test Methods for Flexural Properties of Ceramic Whiteware Materials

    C738 Standard Test Method for Lead and Cadmium Extracted from Glazed Ceramic Surfaces

    C773 Standard Test Method for Compressive (Crushing) Strength of Fired Whiteware Materials

    C848 Standard Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio For Ceramic Whitewares by Resonance

    C849 Standard Test Method for Knoop Indentation Hardness of Ceramic Whitewares

    C949 Standard Test Method for Porosity  in  Vitreous  Whitewares  by  Dye  Penetration

    D116 Standard Test Methods for Vitrified Ceramic Materials for Electrical Applications

    D2442 Standard Specification for Alumina Ceramics for Electrical and Electronic Applications


    C16.30 - Thermal Measurement

    C1041 Standard Practice for In-Situ Measurements of Heat Flux in Industrial Thermal Insulation Using Heat Flux Transducers

    C1043 Standard Practice for Guarded-Hot-Plate Design Using Circular Line-Heat Sources

    C1044 Standard Practice for Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided Mode

    C1045 Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions

    C1046 Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components

    C1055 Standard Guide for Heated System Surface Conditions that Produce Contact Burn Injuries

    C1057 Standard Practice for Determination of Skin Contact Temperature from Heated Surfaces Using a Mathematical Model and Thermesthesiometer

    C1058/C1058M Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation

    C1060 Standard Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings

    C1114 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus

    C1129 Standard Practice for Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges

    C1130 Standard Practice for Calibrating Thin Heat Flux Transducers

    C1153 Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging

    C1155 Standard Practice for Determining Thermal Resistance of Building Envelope Components from the In-Situ Data

    C1199 Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods

    C1303/C1303M Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation

    C1363 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus

    C1371 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers

    C1373/C1373M Standard Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions

    C1549 Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer

    C1558 Standard Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation

    C1667 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Resistivity of Vacuum Panels

    C177 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus

    C1774 Standard Guide for Thermal Performance Testing of Cryogenic Insulation Systems

    C1784 Standard Test Method for Using a Heat Flow Meter Apparatus for Measuring Thermal Storage Properties of Phase Change Materials and Products

    C335/C335M Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation

    C518 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus

    C653 Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation

    C680 Standard Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat, Cylindrical, and Spherical Systems by Use of Computer Programs

    C687 Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation

    C835 Standard Test Method for Total Hemispherical Emittance of Surfaces up to 1400°C


    C14.02 - Chemical Properties and Analysis

    C146 Standard Test Methods for Chemical Analysis of Glass Sand

    C169 Standard Test Methods for Chemical Analysis of Soda-Lime and Borosilicate Glass

    C225 Standard Test Methods for Resistance of Glass Containers to Chemical Attack

    C429 Standard Test Method for Sieve Analysis of Raw Materials for Glass Manufacture

    C813 Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement

    C912 Standard Practice for Designing a Process for Cleaning Technical Glasses


    C09.26 - Chemical Reactions

    C1105 Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction

    C1260 Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)

    C1293 Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction

    C1567 Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)

    C227 Standard Test Method for Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method)

    C289 Standard Test Method for Potential Alkali-Silica Reactivity of Aggregates (Chemical Method)

    C441/C441M Standard Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction

    C586 Standard Test Method for Potential Alkali Reactivity of Carbonate Rocks as Concrete Aggregates (Rock-Cylinder Method)


    C08.92 - The Joseph E. Kopanda Subcommittee for Editorial, Terminology and Classification

    C1190 Standard Practice for Location of Test Specimens from Magnesia-Carbon and Impregnated Burned Basic Brick

    C1547 Standard Classification for Fusion-Cast Refractory Blocks and Shapes

    C155 Standard Classification of Insulating Firebrick

    C1655 Standard Classification of Fireclay and High-Alumina Mortars

    C27 Standard Classification of Fireclay and High-Alumina Refractory Brick

    C401 Standard Classification of Alumina and Alumina-Silicate Castable Refractories

    C416 Standard Classification of Silica Refractory Brick

    C455 Standard Classification of Chrome, Chrome-Magnesia, Magnesia-Chrome, and Magnesia Brick

    C467 Standard Classification of Mullite Refractories

    C545 Standard Classification of Zircon Refractories

    C673 Standard Classification of Fireclay and High-Alumina Plastic Refractories and Ramming Mixes

    C71 Standard Terminology Relating to Refractories

    C861 Standard Practice for Determining Metric Dimensions of Standard Series Refractory Brick and Shapes

    C899 Standard Practice for Use of Metric Units of Measure for Reporting Properties of Refractory Materials

    C909 Standard Practice for Dimensions of a Modular Series of Refractory Brick and Shapes


    C08.04 - Chemical Behaviors

    C288 Standard Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide

    C454 Standard Test Method for Disintegration of Carbon Refractories by Alkali

    C456 Standard Test Method for Hydration Resistance of Basic Bricks and Shapes

    C492 Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite

    C544 Standard Test Method for Hydration of Dead Burned Magnesite or Periclase Grain

    C607 Standard Practice for Coking Large Shapes of Carbon-Bearing Materials

    C831 Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes 

    C863 Standard Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures

    C874 Standard Test Method for Rotary Slag Testing of Refractory Materials


    C08.03 - Physical Properties

    C113 Standard Test Method for Reheat Change of Refractory Brick

    C134 Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick

    C135 Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion

    C1407 Standard Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes

    C20 Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water

    C210 Standard Test Method for Reheat Change of Insulating Firebrick

    C357 Standard Test Method for Bulk Density of Granular Refractory Materials

    C577 Standard Test Method for Permeability of Refractories

    C604 Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer

    C704/C704M Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature

    C830 Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure

    C914 Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion

    C92 Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials


    C08.02 - Thermal Properties

    C108 Standard Symbols for Heat Transmission

    C1113/C1113M Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)

    C1171 Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories

    C182 Standard Test Method for Thermal Conductivity of Insulating Firebrick

    C201 Standard Test Method for Thermal Conductivity of Refractories

    C202 Standard Test Method for Thermal Conductivity of Refractory Brick

    C24 Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High Alumina Refractory Materials

    C417 Standard Test Method for Thermal Conductivity of Unfired Monolithic Refractories

    C767 Standard Test Method for Thermal Conductivity of Carbon Refractories


    C08.01 - Strength

    C1099 Standard Test Method for Modulus of Rupture of Carbon-Containing Refractory Materials at Elevated Temperatures

    C133 Standard Test Methods for Cold Crushing Strength and Modulus of Rupture of Refractories

    C1419 Standard Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young’s Modulus

    C1548 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio of Refractory Materials by Impulse Excitation of Vibration

    C16 Standard Test Method for Load Testing Refractory Shapes at High Temperatures

    C198 Standard Test Method for Cold Bonding Strength of Refractory Mortar

    C199 Standard Test Method for Pier Test for Refractory Mortars

    C583 Standard Test Method for Modulus of Rupture of Refractory Materials at Elevated Temperatures

    C832 Standard Test Method of Measuring Thermal Expansion and Creep of Refractories Under Load

    C885 Standard Test Method for Young's Modulus of Refractory Shapes by Sonic Resonance


    C07.05 - Chemical Tests

    C1271 Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone

    C1301 Standard Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)

    C1318 Standard Test Method for Determination of Total Neutralizing Capability and Dissolved Calcium and Magnesium Oxide in Lime for Flue Gas Desulfurization (FGD)

    C25 Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime

    C400 Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid


    C07.02 - Specifications and Guidelines

    C1097 Standard Specification for Hydrated Lime for Use in Asphalt Cement or Bituminous Paving Mixtures

    C1164 Standard Practice for Evaluation of Limestone or Lime Uniformity From a Single Source

    C141/C141M Standard Specification for Hydrated Hydraulic Lime for Structural Purposes

    C1489 Standard Specification for Lime Putty for Structural Purposes

    C1529 Standard Specification for Quicklime, Hydrated Lime, and Limestone for Environmental Uses

    C1707 Standard Specification for Pozzolanic Hydraulic Lime for Structural Purposes

    C206 Standard Specification for Finishing Hydrated Lime

    C207 Standard Specification for Hydrated Lime for Masonry Purposes

    C5 Standard Specification for Quicklime for Structural Purposes

    C593 Standard Specification for Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization

    C602 Standard Specification for Agricultural Liming Materials

    C706 Standard Specification for Limestone for Animal Feed Use

    C737 Standard Specification for Limestone for Dusting of Coal Mines

    C821 Standard Specification for Lime for Use with Pozzolans

    C911 Standard Specification for Quicklime, Hydrated Lime, and Limestone for Selected Chemical and Industrial Uses

    C977 Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization

    D6249 Standard Guide for Alkaline Stabilization of Wastewater Treatment Plant Residuals


    C01.26 - Heat of Hydration

    C1702 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry

    C186 Standard Test Method for Heat of Hydration of Hydraulic Cement


    C01.23 - Compositional Analysis

    C114 Standard Test Methods for Chemical Analysis of Hydraulic Cement

    C1356 Standard Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure

    C1365 Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis


    C01.22 - Workability

    C1437 Standard Test Method for Flow of Hydraulic Cement Mortar

    C1506 Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters

    C1738/C1738M Standard Practice for High-Shear Mixing of Hydraulic Cement Pastes

    C1749 Standard Guide for Measurement of the Rheological Properties of Hydraulic Cementious Paste Using a Rotational Rheometer

    C187 Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste

    C230/C230M Standard Specification for Flow Table for Use in Tests of Hydraulic Cement

    C305 Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency


    C01.21 - Air Entrainment

    C185 Standard Test Method for Air Content of Hydraulic Cement Mortar


    C01.20 - Additions

    C1565 Standard Test Method for Determination of Pack-Set Index of Portland Cement

    C226 Standard Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement

    C465 Standard Specification for Processing Additions for Use in the Manufacture of Hydraulic Cements

    C688 Standard Specification for Functional Additions for Use in Hydraulic Cements


    C01.13 - Special Cements

    C1600/C1600M Standard Specification for Rapid Hardening Hydraulic Cement

    C806 Standard Test Method for Restrained Expansion of Expansive Cement Mortar

    C845/C845M Standard Specification for Expansive Hydraulic Cement


    C01.11 - Masonry Cement

    C1328/C1328M Standard Specification for Plastic (Stucco) Cement

    C1329/C1329M Standard Specification for Mortar Cement

    C91/C91M Standard Specification for Masonry Cement


    C01.10 - Hydraulic Cements for General Concrete Construction

    C10/C10M Standard Specification for Natural Cement

    C1157/C1157M Standard Performance Specification for Hydraulic Cement

    C150/C150M Standard Specification for Portland Cement

    C595/C595M Standard Specification for Blended Hydraulic Cements


    B09.02 - Base Metal Powders

    B212 Standard Test Method for Apparent Density of Free-Flowing Metal Powders Using the Hall Flowmeter Funnel

    B213 Standard Test Methods for Flow Rate of Metal Powders Using the Hall Flowmeter Funnel

    B214 Standard Test Method for Sieve Analysis of Metal Powders

    B215 Standard Practices for Sampling Metal Powders

    B312 Standard Test Method for Green Strength of Specimens Compacted from Metal Powders

    B331 Standard Test Method for Compressibility of Metal Powders in Uniaxial Compaction

    B417 Standard Test Method for Apparent Density of Non-Free-Flowing Metal Powders Using the Carney Funnel

    B610 Standard Test Method for Measuring Dimensional Changes Associated with Processing Metal Powders

    B703 Standard Test Method for Apparent Density of Metal Powders and Related Compounds Using the Arnold Meter

    B821 Standard Guide for Liquid Dispersion of Metal Powders and Related Compounds for Particle Size Analysis

    B822 Standard Test Method for Particle Size Distribution of Metal Powders and Related Compounds by Light Scattering

    B855 Standard Test Method for Volumetric Flow Rate of Metal Powders Using the Arnold Meter and Hall Flowmeter Funnel

    B873 Standard Test Method for Measuring Volume of Apparent Density Cup Used in Test Methods B212, B329, and B417

    B925 Standard Practices for Production and Preparation of Powder Metallurgy (PM) Test Specimens

    B964 Standard Test Methods for Flow Rate of Metal Powders Using the Carney Funnel

    E159 Standard Test Method for Loss of Mass in Hydrogen for Cobalt, Copper, Tungsten, and Iron Powders (Hydrogen Loss)

    E194 Standard Test Method for Acid-Insoluble Content of Copper and Iron Powders


    B08.12 - Materials for Porcelain Enamel and Ceramic-Metal Systems

    B915 Standard Test Method for Measuring Static Heat Resistance of Self-Cleaning Oven Coating

    B916 Standard Test Method for Adherence of Porcelain Enamel Coatings to Sheet Metal

    C282 Standard Test Method for Acid Resistance of Porcelain Enamels (Citric Acid Spot Test)

    C283 Standard Test Methods for Resistance of Porcelain Enameled Utensils to Boiling Acid

    C285 Standard Test Methods for Sieve Analysis of Wet-Milled and Dry-Milled Porcelain Enamel

    C286 Standard Terminology Relating to Porcelain Enamel and Ceramic-Metal Systems

    C346 Standard Test Method for 45-deg Specular Gloss of Ceramic Materials

    C374 Standard Test Methods for Fusion Flow of Porcelain Enamel Frits (Flow-Button Methods)

    C375 Standard Classification of Water Used in Milling of Porcelain Enamel

    C385 Standard Test Method for Thermal Shock Resistance of Porcelain-Enameled Utensils

    C448 Standard Test Methods for Abrasion Resistance of Porcelain Enamels

    C536 Standard Test Method for Continuity of Coatings in Glassed Steel Equipment by Electrical Testing

    C537 Standard Test Method for Reliability of Glass Coatings on Glassed Steel Reaction Equipment by High Voltage

    C538 Standard Test Method for Color Retention of Red, Orange, and Yellow Porcelain Enamels

    C539 Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Ceramic Whiteware Materials by Interferometric Method

    C614 Standard Test Method for Alkali Resistance of Porcelain Enamels

    C632 Standard Test Method for Reboiling Tendency of Sheet Steel for Porcelain Enameling

    C633 Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings

    C660 Standard Practices for Production and Preparation of Gray Iron Castings for Porcelain Enameling

    C664 Standard Test Methods for Thickness of Diffusion Coating

    C694 Standard Test Method for Weight Loss (Mass Loss) of Sheet Steel During Immersion in Sulfuric Acid Solution

    C703 Standard Test Methods for Spalling Resistance of Porcelain Enameled Aluminum

    C715 Standard Test Method for Nickel on Steel for Porcelain Enameling by Photometric Analysis

    C743 Standard Test Method for Continuity of Porcelain Enamel Coatings

    C756 Standard Test Method for Cleanability of Surface Finishes

    C774 Standard Test Method for Yield Strength of Enameling Steels After Straining and Firing

    C810 Standard Test Method for Nickel on Steel for Porcelain Enameling by X-Ray Emission Spectrometry

    C839 Standard Test Method for Compressive Stress of Porcelain Enamels by Loaded-Beam Method

    C872 Standard Test Method for Lead and Cadmium Release from Porcelain Enamel Surfaces


    B08.10 - Test Methods

    B244 Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments

    B368 Standard Test Method for Copper-Accelerated Acetic Acid-Salt Spray (Fog) Testing (CASS Test)

    B380 Standard Test Method for Corrosion Testing of Decorative Electrodeposited Coatings by the Corrodkote Procedure

    B487 Standard Test Method for Measurement of Metal and Oxide Coating Thickness by Microscopical Examination of Cross Section

    B489 Standard Practice for Bend Test for Ductility of Electrodeposited and Autocatalytically Deposited Metal Coatings on Metals

    B490 Standard Practice for Micrometer Bend Test for Ductility of Electrodeposits

    B499 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Nonmagnetic Coatings on Magnetic Basis Metals

    B504 Standard Test Method for Measurement of Thickness of Metallic Coatings by the Coulometric Method

    B530 Standard Test Method for Measurement of Coating Thicknesses by the Magnetic Method: Electrodeposited Nickel Coatings on Magnetic and Nonmagnetic Substrates

    B555 Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test

    B556 Standard Guide for Measurement of Thin Chromium Coatings by Spot Test

    B567 Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method

    B568 Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry

    B571 Standard Practice for Qualitative Adhesion Testing of Metallic Coatings

    B578 Standard Test Method for Microhardness of Electroplated Coatings

    B588 Standard Test Method for Measurement of Thickness of Transparent or Opaque Coatings by Double-Beam Interference Microscope Technique

    B602 Standard Test Method for Attribute Sampling of Metallic and Inorganic Coatings

    B636 Standard Test Method for Measurement of Internal Stress of Plated Metallic Coatings with the Spiral Contractometer

    B659 Standard Guide for Measuring Thickness of Metallic and Inorganic Coatings

    B678 Standard Test Method for Solderability of Metallic-Coated Products

    B697 Standard Guide for Selection of Sampling Plans for Inspection of Electrodeposited Metallic and Inorganic Coatings

    B748 Standard Test Method for Measurement of Thickness of Metallic Coatings by Measurement of Cross Section with a Scanning Electron Microscope

    B762 Standard Test Method of Variables Sampling of Metallic and Inorganic Coatings

    B764 Standard Test Method for Simultaneous Thickness and Electrode Potential Determination of Individual Layers in Multilayer Nickel Deposit (STEP Test)

    B765 Standard Guide for Selection of Porosity and Gross Defect Tests for Electrodeposits and Related Metallic Coatings

    B767 Standard Guide for Determining Mass Per Unit Area of Electrodeposited and Related Coatings by Gravimetric and Other Chemical Analysis Procedures

    B809 Standard Test Method for Porosity in Metallic Coatings by Humid Sulfur Vapor (“Flowers-of-Sulfur”)

    B839 Standard Test Method for Residual Embrittlement in Metallic Coated, Externally Threaded Articles, Fasteners, and Rod-Inclined Wedge Method

    B866 Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by Polysulfide Immersion

    B877 Standard Test Method for Gross Defects and Mechanical Damage in Metallic Coatings by the Phosphomolybdic Acid (PMA) Method

    B905 Standard Test Methods for Assessing the Adhesion of Metallic and Inorganic Coatings by the Mechanized Tape Test


    B08.08 - Metallic Coatings

    B532 Standard Specification for Appearance of Electroplated Plastic Surfaces


    B08.07 - Conversion Coatings

    B136 Standard Method for Measurement of Stain Resistance of Anodic Coatings on Aluminum

    B137 Standard Test Method for Measurement of Coating Mass Per Unit Area on Anodically Coated Aluminum

    B201 Standard Practice for Testing Chromate Coatings on Zinc and Cadmium Surfaces

    B449 Standard Specification for Chromates on Aluminum

    B457 Standard Test Method for Measurement of Impedance of Anodic Coatings on Aluminum

    B580 Standard Specification for Anodic Oxide Coatings on Aluminum

    B680 Standard Test Method for Seal Quality of Anodic Coatings on Aluminum by Acid Dissolution

    B879 Standard Practice for Applying Non-Electrolytic Conversion Coatings on Magnesium and Magnesium Alloys

    B893 Standard Specification for Hard-Coat Anodizing of Magnesium for Engineering Applications

    B912 Standard Specification for Passivation of Stainless Steels Using Electropolishing

    B921 Standard Specification for Non-hexavalent Chromium Conversion Coatings on Aluminum and Aluminum Alloys

    B940 Standard Practice for Testing Non-Chromate Coatings on Zinc and Cadmium Surfaces

    D1730 Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting

    D1731 Standard Practices for Preparation of Hot-Dip Aluminum Surfaces for Painting

    D1732 Standard Practices for Preparation of Magnesium Alloy Surfaces for Painting


    B02.07 - Refined Nickel and Cobalt and Their Alloys

    B127 Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip

    B160 Standard Specification for Nickel Rod and Bar

    B161 Standard Specification for Nickel Seamless Pipe and Tube

    B162 Standard Specification for Nickel Plate, Sheet, and Strip

    B163 Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes

    B164 Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire

    B165 Standard Specification for Nickel-Copper Alloy (UNS N04400) Seamless Pipe and Tube

    B166 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696),* Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Rod, Bar,

    B167 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696),* Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe an

    B168 Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Plate, Sheet,

    B333 Standard Specification for Nickel-Molybdenum Alloy Plate, Sheet, and Strip

    B335 Standard Specification for Nickel-Molybdenum Alloy Rod

    B366 Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings

    B39 Standard Specification for Nickel

    B407 Standard Specification for Nickel-Iron-Chromium Alloy Seamless Pipe and Tube

    B408 Standard Specification for Nickel-Iron-Chromium Alloy Rod and Bar

    B409 Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip

    B423 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825, N08221, and N06845) Seamless Pipe and Tube

    B424 Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825, UNS N08221, and UNS N06845) Plate, Sheet, and Strip

    B425 Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825, UNS N08221, and UNS N06845) Rod and Bar

    B434 Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, UNS N10242)* Plate, Sheet, and Strip

    B435 Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip

    B443 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy(UNS N06625) and Nickel-Chromium-Molybdenum-SiliconAlloy (UNS N06219) Plate, Sheet, and Strip

    B444 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube

    B446 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloy (UNS N06625), Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219), and Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06650) Rod and Bar

    B462 Standard Specification for Forged or Rolled UNS N06030, UNS N06022, UNS N06035, UNS N06200, UNS N06059, UNS N10362, UNS N06686, UNS N08020, UNS N08024, UNS N08026, UNS N08367, UNS N10276, UNS N10665, UNS N10675, UNS N10629, UNS N08031, UNS N06045,

    B463 Standard Specification for UNS N08020 Alloy Plate, Sheet, and Strip

    B464 Standard Specification for Welded UNS N08020 Alloy Pipe

    B468 Standard Specification for Welded UNS N08020 Alloy Tubes

    B472 Standard Specification for Nickel Alloy Billets and Bars for Reforging

    B473 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Bar and Wire

    B474 Standard Specification for Electric Fusion Welded Nickel and Nickel Alloy Pipe

    B475 Standard Specification for UNS N08020, UNS N08024, and UNS N08026 Nickel Alloy Round Weaving Wire

    B511 Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes

    B512 Standard Specification for Nickel-Chromium-Silicon Alloy (UNS N08330) Billets and Bars

    B514 Standard Specification for Welded Nickel-Iron-Chromium Alloy Pipe

    B515 Standard Specification for Welded UNS N08120, UNS N08800, UNS N08810, and UNS N08811 Alloy Tubes

    B516 Standard Specification for Welded Nickel-Chromium-Iron Alloy (UNS N06600, UNS N06601, UNS N06603, UNS N06025, UNS N06045, UNS N06690, and UNS N06693) Tubes

    B517 Standard Specification for Welded Nickel-Chromium-Iron-Alloy (UNS N06600, UNS N06603, UNS N06025, and UNS N06045) Pipe

    B535 Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and Tube

    B536 Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Plate, Sheet, and Strip

    B546 Standard Specification for Electric Fusion-Welded Ni-Cr-Co-Mo Alloy (UNS N06617), Ni-Fe-Cr-Si Alloys (UNS N08330 and UNS N08332), Ni-Cr-Fe-Al Alloy (UNS N06603), Ni-Cr-Fe Alloy (UNS N06025), and Ni-Cr-Fe-Si Alloy (UNS N06045) Pipe

    B564 Standard Specification for Nickel Alloy Forgings

    B572 Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod

    B573 Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, N10242)* Rod

    B574 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Molybdenum-Chromium, Low-Carbon Nickel-Molybdenum-Chromium-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, and Low-Carbon Nickel-Chromium-Molybdenum-Tungsten

    B575 Standard Specification for Low-Carbon Nickel-Chromium-Molybdenum, Low-Carbon Nickel-Chromium-Molybdenum-Copper, Low-Carbon Nickel-Chromium-Molybdenum-Tantalum, Low-Carbon Nickel-Chromium-Molybdenum-Tungsten, and Low-Carbon Nickel-Molybdenum-Chromium

    B581 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Rod

    B582 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Copper Alloy Plate, Sheet, and Strip

    B599 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Plate, Sheet, and Strip

    B619 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Pipe

    B620 Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Plate, Sheet, and Strip

    B621 Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod

    B622 Standard Specification for Seamless Nickel and Nickel-Cobalt Alloy Pipe and Tube

    B625 Standard Specification for UNS N08925, UNS N08031, UNS N08932, UNS N08926, UNS N08354, UNS N08830, and UNS R20033 Plate, Sheet, and Strip

    B626 Standard Specification for Welded Nickel and Nickel-Cobalt Alloy Tube

    B637 Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service

    B639 Standard Specification for Precipitation Hardening Cobalt-Containing Alloys (UNS R30155 and UNS R30816) Rod, Bar, Forgings, and Forging Stock for High-Temperature Service

    B649 Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire

    B668 Standard Specification for UNS N08028 and N08029 Seamless Pipe and Tube

    B670 Standard Specification for Precipitation-Hardening Nickel Alloy (UNS N07718) Plate, Sheet, and Strip for High-Temperature Service

    B672 Standard Specification for Nickel-Iron-Chromium-Molybdenum-Columbium Stabilized Alloy (UNS N08700) Bar and Wire

    B673 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe

    B674 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Tube

    B675 Standard Specification for UNS N08367 Welded Pipe

    B676 Standard Specification for UNS N08367 Welded Tube

    B677 Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube

    B688 Standard Specification for Chromium-Nickel-Molybdenum-Iron (UNS N08366 and UNS N08367) Plate, Sheet, and Strip

    B690 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Seamless Pipe and Tube

    B691 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloys (UNS N08366 and UNS N08367) Rod, Bar, and Wire

    B704 Standard Specification for Welded UNS N06625, UNS N06219 and UNS N08825 Alloy Tubes

    B705 Standard Specification for Nickel-Alloy (UNS N06625, N06219 and N08825) Welded Pipe

    B709 Standard Specification for Iron-Nickel-Chromium-Molybdenum Alloy (UNS N08028) Plate, Sheet, and Strip

    B710 Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Pipe

    B718 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip

    B719 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Bar

    B722 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube

    B723 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Pipe

    B725 Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Pipe

    B726 Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube

    B729 Standard Specification for Seamless UNS N08020, UNS N08026, and UNS N08024 Nickel-Alloy Pipe and Tube

    B730 Standard Specification for Welded Nickel (UNS N02200/UNS N02201) and Nickel Copper Alloy (UNS N04400) Tube

    B739 Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Welded Tube

    B751 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Tube

    B755 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate, Sheet, and Strip

    B756 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloy (UNS N06110) Rod and Bar

    B757 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe

    B758 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube

    B759 Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Pipe and Tube

    B775 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe

    B804 Standard Specification for UNS N08367 and UNS N08926 Welded Pipe

    B805 Standard Specification for Precipitation Hardening Nickel Alloys Bar and Wire

    B814 Standard Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy (UNS N06920) Plate, Sheet, and Strip

    B815 Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod

    B818 Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Plate, Sheet and Strip

    B829 Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube

    B834 Standard Specification for Pressure Consolidated Powder Metallurgy Iron-Nickel-Chromium-Molybdenum (UNS N08367) and Nickel-Chromium-Molybdenum-Columbium (Nb) (UNS N06625) Alloy Pipe Flanges, Fittings, Valves, and Parts

    B865 Standard Specification for Precipitation Hardening Nickel-Copper-Aluminum Alloy (UNS N05500) Bar, Rod, Wire, Forgings, and Forging Stock

    B872 Standard Specification for Precipitation-Hardening Nickel Alloys Plate, Sheet, and Strip

    B880 Standard Specification for General Requirements for Chemical Check Analysis Limits for Nickel, Nickel Alloys and Cobalt Alloys

    B906 Standard Specification for General Requirements for Flat-Rolled Nickel and Nickel Alloys Plate, Sheet, and Strip

    B924 Standard Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger Tubes With Integral Fins

    B983 Standard Specification for Precipitation Hardened or Cold Worked, Seamless Nickel Alloy Pipe and Tube


    B02.05 - Precious Metals and Electrical Contact Materials

    B413 Standard Specification for Refined Silver

    B476 Standard Specification for General Requirements for Wrought Precious Metal Electrical Contact Materials

    B477 Standard Specification for Gold-Silver-Nickel Electrical Contact Alloy

    B522 Standard Specification for Gold-Silver-Platinum Electrical Contact Alloy

    B540 Standard Specification for Palladium Electrical Contact Alloy

    B541 Standard Specification for Gold Electrical Contact Alloy

    B561 Standard Specification for Refined  Platinum

    B562 Standard Specification for Refined Gold

    B563 Standard Specification for Palladium-Silver-Copper Electrical Contact Alloy

    B576 Standard Guide for Arc Erosion Testing of Electrical Contact Materials

    B589 Standard Specification for Refined Palladium

    B596 Standard Specification for Gold-Copper Alloy Electrical Contact Material

    B613 Standard Guide for Preparing Specifications for Miniature Brushes of Composite Materials for Sliding Electric Contacts

    B616 Standard Specification for Refined Rhodium

    B617 Standard Specification for Coin Silver Electrical Contact Alloy

    B628 Standard Specification for Silver-Copper Eutectic Electrical Contact Alloy

    B631 Standard Specification for Silver-Tungsten Electrical Contact Materials

    B662 Standard Specification for Silver-Molybdenum Electrical Contact Material

    B663 Standard Specification for Silver-Tungsten Carbide Electrical Contact Material

    B664 Standard Specification for 80 % Silver-20 % Graphite Sliding Contact Material

    B671 Standard Specification for Refined Iridium

    B683 Standard Specification for Pure Palladium Electrical Contact Material

    B684 Standard Specification for Platinum-Iridium Electrical Contact Materials

    B685 Standard Specification for Palladium-Copper Electrical Contact Material

    B692 Standard Specification for 75 % Silver-25 % % Graphite Sliding Contact Material

    B693 Standard Specification for Silver-Nickel Electrical Contact Materials

    B702 Standard Specification for Copper-Tungsten Electrical Contact Material

    B717 Standard Specification for Refined Ruthenium

    B731 Standard Specification for 60 % Palladium-40 % Silver Electrical Contact Material

    B742 Standard Specification for Fine Silver Electrical Contact Fabricated Material

    B772 Standard Guide for Specifying the Chemical Compositions for Electrical Contact Materials (Arcing and Nonarcing)

    B780 Standard Specification for 75% Silver, 24.5% Copper, 0.5% Nickel Electrical Contact Alloy

    B781 Standard Guide for Silver-Cadmium Oxide Contact Material

    B844 Standard Guide for Silver-Tin Oxide Contact Material