Aerospace by Committee

    F39.03 - Design of Avionics Systems

    F3011 Standard Specification for Performance of Angle of Attack System


    F39.02 - Inspection, Alteration, Maintenance, and Repair

    F2696 Standard Practice for Inspection of Aircraft Electrical Wiring Systems

    F2799 Standard Practice for Maintenance of Aircraft Electrical Wiring Systems


    F39.01 - Design, Alteration, and Certification of Electrical Systems

    F2490 Standard Guide for Aircraft Electrical Load and Power Source Capacity Analysis

    F2639 Standard Practice for Design, Alteration, and Certification of Airplane Electrical Wiring Systems


    F38.03 - Personnel Training, Qualification and Certification

    F2908 Standard Specification for Aircraft Flight Manual (AFM) for a Small Unmanned Aircraft System (sUAS)


    F38.02 - Flight Operations

    F2500 Standard Practice for Unmanned Aircraft System (UAS) Visual Range Flight Operations

    F2849 Standard Practice for Handling of Unmanned Aircraft Systems at Divert Airfields

    F2909 Standard Practice for Maintenance and Continued Airworthiness of Small Unmanned Aircraft Systems (sUAS)


    F38.01 - Airworthiness

    F2512 Standard Practice for Quality Assurance in the Manufacture of Light Unmanned Aircraft System

    F2585 Standard Specification for Design and Performance of Pneumatic-Hydraulic Unmanned Aircraft System (UAS) Launch System

    F2851 Standard Practice for UAS Registration and Marking (Excluding Small Unmanned Aircraft Systems)

    F2910 Standard Specification for Design and Construction of a Small Unmanned Aircraft System (sUAS)

    F2911 Standard Practice for Production Acceptance of Small Unmanned Aircraft System (sUAS)

    F3002 Standard Specification for Design of the Command and Control System for Small Unmanned Aircraft Systems (sUAS)

    F3003 Standard Specification for Quality Assurance of a Small Unmanned Aircraft System (sUAS)

    F3005 Standard Specification for Batteries for Use in Small Unmanned Aircraft Systems (sUAS)


    F37.70 - Cross Cutting

    F2316 Standard Specification for Airframe Emergency Parachutes

    F2339 Standard Practice for Design and Manufacture of Reciprocating Spark Ignition Engines for Light Sport Aircraft

    F2483 Standard Practice for Maintenance and the Development of Maintenance Manuals for Light Sport Aircraft

    F2506 Standard Specification for Design and Testing of Light Sport Aircraft Propellers

    F2507 Standard Specification for Recreational Airpark Design

    F2538 Standard Practice for Design and Manufacture of Reciprocating Compression Ignition Engines for Light Sport Aircraft

    F2563 Standard Practice for Kit Assembly Instructions of Aircraft Intended Primarily for Recreation

    F2839 Standard Practice for Compliance Audits to ASTM Standards on Light Sport Aircraft

    F2930 Standard Guide for Compliance with Light Sport Aircraft Standards

    F2972 Standard Specification for Light Sport Aircraft Manufacturer’s Quality Assurance System


    F37.60 - Lighter than Air

    F2354 Standard Specification for Continued Airworthiness System for Lighter-Than-Air Light Sport Aircraft

    F2355 Standard Specification for Design and Performance Requirements for Lighter-Than-Air Light Sport Aircraft

    F2356 Standard Specification for Production Acceptance Testing System for Lighter-Than-Air Light Sport Aircraft

    F2427 Standard Specification for Required Product Information to be Provided with Lighter-Than-Air Light Sport Aircraft


    F37.50 - Gyroplane

    F2352 Standard Specification for Design and Performance of Light Sport Gyroplane Aircraft

    F2415 Standard Practice for Continued Airworthiness System for Light Sport Gyroplane Aircraft


    F37.40 - Weight Shift

    F2317/F2317M Standard Specification for Design of Weight-Shift-Control Aircraft

    F2425 Standard Specification for Continued Airworthiness System for Weight-Shift-Control Aircraft

    F2447 Standard Practice for Production Acceptance Test Procedures for Weight-Shift-Control Aircraft

    F2457 Standard Specification for Required Product Information to be Provided with Weight-Shift-Control Aircraft


    F37.30 - Power Parachute

    F2241 Standard Specification for Continued Airworthiness System for Powered Parachute Aircraft

    F2242 Standard Specification for Production Acceptance Testing System for Powered Parachute Aircraft

    F2243 Standard Specification for Required Product Information to be Provided with Powered Parachute Aircraft

    F2244 Standard Specification for Design and Performance Requirements for Powered Parachute Aircraft

    F2426 Standard Guide on Wing Interface Documentation for Powered Parachute Aircraft


    F37.20 - Airplane

    F2245 Standard Specification for Design and Performance of a Light Sport Airplane

    F2295 Standard Practice for Continued Operational Safety Monitoring of a Light Sport Aircraft

    F2745 Standard Specification for Required Product Information to be Provided with an Airplane

    F2746 Standard Specification for Pilot’s Operating Handbook (POH) for Light Sport Airplane

    F2840 Standard Practice for Design and Manufacture of Electric Propulsion Units for Light Sport Aircraft

    F3035 Standard Practice for Production Acceptance in the Manufacture of a Fixed Wing Light Sport Aircraft


    F37.10 - Glider

    F2564 Standard Specification for Design and Performance of a Light Sport Glider


    F34.06 - Aerospace

    F2332 Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components

    F2953 Standard Specification for Phenolic Raw Materials for the Use in Bearing Cages

    F3131 Standard Specification for Epoxy / Cotton Raw Materials for the Use in Bearing Cages


    F24.24 - Design and Manufacture

    F1159 Standard Practice for Design of Amusement Rides and Devices that are Outside the Purview of Other F24 Design Standards

    F1193 Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices

    F2291 Standard Practice for Design of Amusement Rides and Devices

    F2375 Standard Practice for Design, Manufacture, Installation and Testing of Climbing Nets and Netting/Mesh used in Amusement Rides, Devices, Play Areas and Attractions


    F24.10 - Test Methods

    F1957 Standard Test Method for Composite Foam Hardness-Durometer Hardness

    F2137 Standard Practice for Measuring the Dynamic Characteristics of Amusement Rides and Devices


    F16.03 - Coatings on Fasteners

    F1136/F1136M Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners

    F1137 Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners

    F1428 Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners

    F1941 Standard Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch Screw Threads (UN/UNR))

    F1941M Standard Specification for Electrodeposited Coatings on Threaded Fasteners [Metric]

    F2329 Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners

    F2833 Standard Specification for Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type

    F3019/F3019M Standard Specification for Chromium Free Zinc-Flake Composite, with or without Integral Lubricant, Corrosion Protective Coatings for Fasteners


    F16.02 - Steel Bolts, Nuts, Rivets and Washers

    A307 Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60000 PSI Tensile Strength

    A31 Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels

    A325 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

    A325M Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength (Metric)

    A354 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners

    A394 Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare

    A449 Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use

    A489 Standard Specification for Carbon Steel Lifting Eyes

    A490 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

    A490M Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)

    A502 Standard Specification for Rivets, Steel, Structural

    A563 Standard Specification for Carbon and Alloy Steel Nuts

    A563M Standard Specification for Carbon and Alloy Steel Nuts (Metric)

    A574 Standard Specification for Alloy Steel Socket-Head Cap Screws

    A574M Standard Specification for Alloy Steel Socket-Head Cap Screws (Metric)

    F1554 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength

    F1852 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

    F2280 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength

    F2437 Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs

    F2482 Standard Specification for Load-Indicating Externally Threaded Fasteners

    F2882 Standard Specification for Screws, Alloy Steel, Heat Treated, 170 ksi Minimum Tensile Strength

    F2882M Standard Specification for Screws, Alloy Steel, Heat Treated, 1170 MPa Minimum Tensile Strength [Metric]

    F3043 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength

    F3111 Standard Specification for Heavy Hex Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength

    F3125 Standard Specification for High Strength Structural Bolts, Steel and Alloy Steel, Heat Treated, 120 ksi (830 MPa) and 150 ksi (1040 MPa) Minimum Tensile Strength, Inch and Metric Dimensions

    F432 Standard Specification for Roof and Rock Bolts and Accessories

    F436 Standard Specification for Hardened Steel Washers

    F436M Standard Specification for Hardened Steel Washers [Metric]

    F541 Standard Specification for Alloy Steel Eyebolts

    F835 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws

    F835M Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)

    F844 Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use

    F912 Standard Specification for Alloy Steel Socket Set Screws

    F912M Standard Specification for Alloy Steel Socket Set Screws (Metric)

    F959 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners

    F959M Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners (Metric)


    F16.01 - Test Methods

    F2328 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts

    F2328M Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts (Metric)

    F2660 Standard Test Method for Qualifying Coatings for Use on A490 Structural Bolts Relative to Environmental Hydrogen Embrittlement

    F2832 Standard Guide for Accelerated Corrosion Testing for Mechanical Fasteners

    F606/F606M Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets


    F07.08 - Transparent Enclosures and Materials

    F1164 Standard Test Method for Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress

    F1165 Standard Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts

    F1181 Standard Test Method for Measuring Binocular Disparity in Transparent Parts

    F1252 Standard Test Method for Measuring Optical Reflectivity of Transparent Materials

    F1316 Standard Test Method for Measuring the Transmissivity of Transparent Parts

    F1362 Standard Test Method for Shear Strength and Shear Modulus of Aerospace Glazing Interlayer Materials

    F1863 Standard Test Method for Measuring the Night Vision Goggle-Weighted Transmisivity of Transparent Parts

    F1864 Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings

    F2108 Standard Practice for Inspection of Transparent Parts by Prism

    F2156 Standard Test Method for Measuring Optical Distortion in Transparent Parts Using Grid Line Slope

    F2429 Standard Terminology Relating to Aerospace Transparent Materials and Enclosures

    F2469 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method

    F319 Standard Practice for Polarized Light Detection of Flaws in Aerospace Transparency Heating Elements

    F320 Standard Test Method for Hail Impact Resistance of Aerospace Transparent Enclosures

    F330 Standard Test Method for Bird Impact Testing of Aerospace Transparent Enclosures

    F428 Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures

    F520 Standard Test Method for Environmental Resistance of Aerospace Transparencies

    F521 Standard Test Methods for Bond Integrity of Transparent Laminates

    F548 Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics

    F733 Standard Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method

    F734 Standard Test Method for Shear Strength of Fusion Bonded Polycarbonate Aerospace Glazing Material

    F735 Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method

    F736 Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight

    F790 Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures

    F791 Standard Test Method for Stress Crazing of Transparent Plastics

    F801 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts

    F942 Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures


    F07.07 - Qualification Testing of Aircraft Cleaning Materials

    F1080 Standard Test Method for Determining the Consistency of Viscous Liquids Using a Consistometer

    F1104 Standard Test Method for Preparing Aircraft Cleaning Compounds, Liquid Type, Water Base, for Storage Stability Testing

    F1105 Standard Practice for Preparing Aircraft Cleaning Compounds, Liquid-Type, Temperature-Sensitive, or Solvent-Based, for Storage Stability Testing

    F1110 Standard Test Method for Sandwich Corrosion Test

    F1111 Standard Test Method for Corrosion of Low-Embrittling Cadmium Plate by Aircraft Maintenance Chemicals

    F2109 Standard Test Method to Determine Color Change and Staining Caused by Aircraft Maintenance Chemicals upon Aircraft Cabin Interior Hard Surfaces

    F2111 Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes

    F482 Standard Practice for Corrosion of Aircraft Metals by Total Immersion in Maintenance Chemicals

    F483 Standard Practice for Total Immersion Corrosion Test for Aircraft Maintenance Chemicals

    F484 Standard Test Method for Stress Crazing of Acrylic Plastics in Contact with Liquid or Semi-Liquid Compounds

    F485 Standard Practice for Effects of Cleaners on Unpainted Aircraft Surfaces

    F502 Standard Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces

    F862 Standard Practice for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids

    F945 Standard Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials


    F07.04 - Hydrogen Embrittlement

    F1113 Standard Test Method for Electrochemical Measurement of Diffusible Hydrogen in Steels (Barnacle Electrode)

    F1459 Standard Test Method for Determination of the Susceptibility of Metallic Materials to Hydrogen Gas Embrittlement (HGE)

    F1624 Standard Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique

    F2078 Standard Terminology Relating to Hydrogen Embrittlement Testing

    F326 Standard Test Method for Electronic Measurement for Hydrogen Embrittlement From Cadmium-Electroplating Processes

    F519 Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments


    E21.08 - Thermal Protection

    E2683 Standard Test Method for Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages

    E2684 Standard Test Method for Measuring Heat Flux Using Surface-Mounted One-Dimensional Flat Gages

    E285 Standard Test Method for Oxyacetylene Ablation Testing of Thermal Insulation Materials

    E341 Standard Practice for Measuring Plasma Arc Gas Enthalpy by Energy Balance

    E377 Standard Practice for Internal Temperature Measurements in Low-Conductivity Materials

    E422 Standard Test Method for Measuring Heat Flux Using a Water-Cooled Calorimeter

    E457 Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter

    E458 Standard Test Method for Heat of Ablation

    E459 Standard Test Method for Measuring Heat Transfer Rate Using a Thin-Skin Calorimeter

    E471 Standard Test Method for Obtaining Char Density Profile of Ablative Materials by Machining and Weighing

    E511 Standard Test Method for Measuring Heat Flux Using a Copper-Constantan Circular Foil, Heat-Flux Transducer

    E598 Standard Test Method for Measuring Extreme Heat-Transfer Rates from High-Energy Environments Using a Transient, Null-Point Calorimeter

    E637 Standard Test Method for Calculation of Stagnation Enthalpy from Heat Transfer Theory and Experimental Measurements of Stagnation-Point Heat Transfer and Pressure


    E21.05 - Contamination

    E1216 Standard Practice for Sampling for Particulate Contamination by Tape Lift

    E1234 Standard Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft

    E1235 Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft

    E1548 Standard Practice for Preparation of Aerospace Contamination Control Plans

    E1549/E1549M Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations

    E1559 Standard Test Method for Contamination Outgassing Characteristics of Spacecraft Materials

    E1560 Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers

    E1731 Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves

    E1997 Standard Practice for the Selection of Spacecraft Materials

    E2042/E2042M Standard Practice for Cleaning and Maintaining Controlled Areas and Clean Rooms

    E2088 Standard Practice for Selecting, Preparing, Exposing, and Analyzing Witness Surfaces for Measuring Particle Deposition in Cleanrooms and Associated Controlled Environments

    E2090 Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy

    E2217 Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas

    E2311 Standard Practice for QCM Measurement of Spacecraft Molecular Contamination in Space

    E2312 Standard Practice for Tests of Cleanroom Materials

    E2352 Standard Practice for Aerospace Cleanrooms and Associated Controlled Environments-Cleanroom Operations

    E2900 Standard Practice for Spacecraft Hardware Thermal Vacuum Bakeout

    E595 Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment

    E834 Standard Practice for Determining Vacuum Chamber Gaseous Environment Using a Cold Finger

    F21 Standard Test Method for Hydrophobic Surface Films by the Atomizer Test

    F22 Standard Test Method for Hydrophobic Surface Films by the Water-Break Test

    F24 Standard Method for Measuring and Counting Particulate Contamination on Surfaces

    F25/F25M Standard Test Method for Sizing and Counting Airborne Particulate Contamination in Cleanrooms and Other Dust-Controlled Areas

    F302 Standard Practice for Field Sampling of Aerospace Fluids in Containers

    F303 Standard Practices for Sampling for Particles in Aerospace Fluids and Components

    F307 Standard Practice for Sampling Pressurized Gas for Gas Analysis

    F309 Standard Practice for Liquid Sampling of Noncryogenic Aerospace Propellants

    F310 Standard Practice for Sampling Cryogenic Aerospace Fluids

    F311 Standard Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters

    F312 Standard Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters

    F327 Standard Practice for Sampling Gas Blow Down Systems and Components for Particulate Contamination by Automatic Particle Monitor Method

    F331 Standard Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (Using Flash Evaporator)

    F50 Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles

    F51/F51M Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments

    F91 Standard Practice for Testing for Leaks in the Filters Associated With Laminar Flow Clean Rooms and Clean Work Stations by Use of a Condensation Nuclei Detector


    E21.04 - Space Simulation Test Methods

    E2089 Standard Practices for Ground Laboratory Atomic Oxygen Interaction Evaluation of Materials for Space Applications

    E295 Standard Test Method for Measured Speed of Oil Diffusion Pumps

    E296 Standard Practice for Ionization Gage Application to Space Simulators

    E307 Standard Test Method for Normal Spectral Emittance at Elevated Temperatures

    E408 Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques

    E423 Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens

    E434 Standard Test Method for Calorimetric Determination of Hemispherical Emittance and the Ratio of Solar Absorptance to Hemispherical Emittance Using Solar Simulation

    E490 Standard Solar Constant and Zero Air Mass Solar Spectral Irradiance Tables

    E491 Standard Practice for Solar Simulation for Thermal Balance Testing of Spacecraft

    E512 Standard Practice for Combined, Simulated Space Environment Testing of Thermal Control Materials with Electromagnetic and Particulate Radiation


    E21.02 - Terminology, Units and Editorial

    E349 Standard Terminology Relating to Space Simulation


    E17.42 - Pavement Management and Data Needs

    D5340 Standard Test Method for Airport Pavement Condition Index Surveys

    D6433 Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys

    E1166 Standard Guide for Network Level Pavement Management

    E1656/E1656M Standard Guide for Classification of Automated Pavement Condition Survey Equipment

    E1777 Standard Guide for Prioritization of Data Needs for Pavement Management

    E1778 Standard Terminology Relating to Pavement Distress

    E1889 Standard Guide for Pavement Management Implementation

    E2840 Standard Practice for Pavement Condition Index Surveys for Interlocking Concrete Roads and Parking Lots


    E17.41 - Pavement Testing and Evaluation

    D1195/D1195M Standard Test Method for Repetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements

    D1196/D1196M Standard Test Method for Nonrepetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements

    D4602 Standard Guide for Nondestructive Testing of Pavements Using Cyclic-Loading Dynamic Deflection Equipment

    D4694 Standard Test Method for Deflections with a Falling-Weight-Type Impulse Load Device

    D4695 Standard Guide for General Pavement Deflection Measurements

    D4748 Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar

    D5858 Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory

    D6951/D6951M Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications

    D7228 Standard Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures

    E2583 Standard Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD)

    E2835 Standard Test Method for Measuring Deflections using a Portable Impulse Plate Load Test Device


    E17.21 - Field Methods for Measuring Tire Pavement Friction

    E1337 Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire

    E1859/E1859M Standard Test Method for Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique

    E1890 Standard Guide for Validating New Area Reference Skid Measurement Systems and Equipment

    E1911 Standard Test Method for Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester

    E1960 Standard Practice for Calculating International Friction Index of a Pavement Surface

    E2100 Standard Practice for Calculating the International Runway Friction Index

    E2101 Standard Test Method for Measuring the Frictional Properties of Winter Contaminated Pavement Surfaces Using an Averaging-Type Spot Measuring Decelerometer

    E2340/E2340M Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique

    E2341/E2341M Standard Test Method for Determining the Stopping Distance Number by Initial Speed and Stopping Distance at Traffic Incident Sites

    E2666 Standard Practice for Correlations of Mu Values of Continuous Friction Measurement Equipment to Determine Maintenance Levels for Use at Airports

    E274/E274M Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire

    E2793 Standard Guide for the Evaluation, Calibration, and Correlation of E274 Friction Measurement Systems and Equipment

    E2883 Standard Guide for Standard Guide for the Evaluation, and Calibration, Continuous Friction Measurement Equipment (CFME)

    E445/E445M Standard Test Method for Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped With Full-Scale Tires

    E556/E556M Standard Test Method for Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform (User Level)

    E670 Standard Test Method for Side Force Friction on Paved Surfaces Using the Mu-Meter


    E07.10 - Specialized NDT Methods

    E1213 Standard Practice for Minimum Resolvable Temperature Difference for Thermal Imaging Systems

    E1311 Standard Practice for Minimum Detectable Temperature Difference for Thermal Imaging Systems

    E1476 Standard Guide for Metals Identification, Grade Verification, and Sorting

    E1543 Standard Practice for Noise Equivalent Temperature Difference of Thermal Imaging Systems

    E1862 Standard Practice for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers

    E1897 Standard Practice for Measuring and Compensating for Transmittance of an Attenuating Medium Using Infrared Imaging Radiometers

    E1933 Standard Practice for Measuring and Compensating for Emissivity Using Infrared Imaging Radiometers

    E1934 Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography

    E2533 Standard Guide for Nondestructive Testing of Polymer Matrix Composites Used in Aerospace Applications

    E2581 Standard Practice for Shearography of Polymer Matrix Composites and Sandwich Core Materials in Aerospace Applications

    E2582 Standard Practice for Infrared Flash Thermography of Composite Panels and Repair Patches Used in Aerospace Applications

    E2775 Standard Practice for Guided Wave Testing of Above Ground Steel Pipework Using Piezoelectric Effect Transduction

    E2862 Standard Practice for Probability of Detection Analysis for Hit/Miss Data

    E2906/E2906M Standard Practice for Acoustic Pulse Reflectometry Examination of Tube Bundles

    E2929 Standard Practice for Guided Wave Testing of Above Ground Steel Piping with Magnetostrictive Transduction

    E2982 Standard Guide for Nondestructive Testing of Thin-Walled Metallic Liners in Filament-Wound Pressure Vessels Used in Aerospace Applications

    E977 Standard Practice for Thermoelectric Sorting of Electrically Conductive Materials


    E07.06 - Ultrasonic Method

    E1001 Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves

    E1065/E1065M Standard Guide for Evaluating Characteristics of Ultrasonic Search Units

    E114 Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing

    E1158 Standard Guide for Material Selection and Fabrication of Reference Blocks for the Pulsed Longitudinal Wave Ultrasonic Testing of Metal and Metal Alloy Production Material

    E127 Standard Practice for Fabricating and Checking Aluminum Alloy Ultrasonic Standard Reference Blocks

    E1324 Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Testing Instruments

    E164 Standard Practice for Contact Ultrasonic Testing of Weldments

    E1774 Standard Guide for Electromagnetic Acoustic Transducers (EMATs)

    E1816 Standard Practice for Ultrasonic Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques

    E1901 Standard Guide for Detection and Evaluation of Discontinuities by Contact Pulse-Echo Straight-Beam Ultrasonic Methods

    E1961 Standard Practice for Mechanized Ultrasonic Testing of Girth Welds Using Zonal Discrimination with Focused Search Units

    E1962 Standard Practice for Ultrasonic Surface Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques

    E2001 Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-metallic Parts

    E213 Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing

    E2192 Standard Guide for Planar Flaw Height Sizing by Ultrasonics

    E2223 Standard Practice for Examination of Seamless, Gas-Filled, Steel Pressure Vessels Using Angle Beam Ultrasonics

    E2373/E2373M Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique

    E2375 Standard Practice for Ultrasonic Testing of Wrought Products

    E2479 Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (LCR) Waves

    E2491 Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems

    E2534 Standard Practice for Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts

    E2580 Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications

    E2700 Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays

    E273 Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing

    E2904 Standard Practice for Characterization and Verification of Phased Array Probes

    E2985/E2985M Standard Practice for Determination of Metal Purity Based on Elastic Constant Measurements Derived from Resonant Ultrasound Spectroscopy

    E317 Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments

    E428 Standard Practice for Fabrication and Control of Metal, Other than Aluminum, Reference Blocks Used in Ultrasonic Testing

    E494 Standard Practice for Measuring Ultrasonic Velocity in Materials

    E587 Standard Practice for Ultrasonic Angle-Beam Contact Testing

    E664/E664M Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method

    E797/E797M Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method


    E07.04 - Acoustic Emission Method

    E1067/E1067M Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels

    E1106 Standard Test Method for Primary Calibration of Acoustic Emission Sensors

    E1118/E1118M Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)

    E1139/E1139M Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries

    E1211/E1211M Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors

    E1419 Standard Practice for Examination of Seamless, Gas-Filled, Pressure Vessels Using Acoustic Emission

    E1495/E1495M Standard Guide for Acousto-Ultrasonic Assessment of Composites, Laminates, and Bonded Joints

    E1736 Standard Practice for Acousto-Ultrasonic Assessment of Filament-Wound Pressure Vessels

    E1781/E1781M Standard Practice for Secondary Calibration of Acoustic Emission Sensors

    E1888/E1888M Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores

    E1930/E1930M Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission

    E1932 Standard Guide for Acoustic Emission Examination of Small Parts

    E2075/E2075M Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod

    E2076/E2076M Standard Practice for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission

    E2191/E2191M Standard Practice for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission

    E2374 Standard Guide for Acoustic Emission System Performance Verification

    E2478 Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission

    E2598/E2598M Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper Dryers

    E2661/E2661M Standard Practice for Acoustic Emission Examination of Plate-like and Flat Panel Composite Structures Used in Aerospace Applications

    E2863 Standard Practice for Acoustic Emission Examination of Welded Steel Sphere Pressure Vessels Using Thermal Pressurization

    E2907/E2907M Standard Practice for Examination of Paper Machine Rolls Using Acoustic Emission from Crack Face Rubbing

    E2983 Standard Guide for Application of Acoustic Emission for Structural Health Monitoring

    E2984/E2984M Standard Practice for Acoustic Emission Examination of High Pressure, Low Carbon, Forged Piping using Controlled Hydrostatic Pressurization

    E569/E569M Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation

    E650/E650M Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors

    E749/E749M Standard Practice for Acoustic Emission Monitoring During Continuous Welding

    E750 Standard Practice for Characterizing Acoustic Emission Instrumentation

    E751/E751M Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding

    E976 Standard Guide for Determining the Reproducibility of Acoustic Emission Sensor Response


    E07.02 - Reference Radiological Images

    E1320 Standard Reference Radiographs for Titanium Castings

    E155 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings

    E1648 Standard Reference Radiographs for Examination of Aluminum Fusion Welds

    E186 Standard Reference Radiographs for Heavy-Walled (2 to 4½-in. (50.8 to 114-mm)) Steel Castings

    E192 Standard Reference Radiographs of Investment Steel Castings for Aerospace Applications

    E1936 Standard Reference Radiograph for Evaluating the Performance of Radiographic Digitization Systems

    E1955 Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM Reference Radiographs

    E242 Standard Reference Radiographs for Appearances of Radiographic Images as Certain Parameters Are Changed

    E2422 Standard Digital Reference Images for Inspection of Aluminum Castings

    E2660 Standard Digital Reference Images for Investment Steel Castings for Aerospace Applications

    E2669 Standard Digital Reference Images for Titanium Castings

    E272 Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings

    E280 Standard Reference Radiographs for Heavy-Walled (4½ to 12-in. (114 to 305-mm)) Steel Castings

    E2868 Standard Digital Reference Images for Steel Castings up to 2 in. (50.8 mm) in Thickness

    E2869 Standard Digital Reference Images for Magnesium Castings

    E2973 Standard Digital Reference Images for Inspection of Aluminum and Magnesium Die Castings

    E310 Standard Reference Radiographs for Tin Bronze Castings

    E390 Standard Reference Radiographs for Steel Fusion Welds

    E431 Standard Guide to Interpretation of Radiographs of Semiconductors and Related Devices

    E446 Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness

    E505 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Die Castings

    E592 Standard Guide to Obtainable ASTM Equivalent Penetrameter Sensitivity for Radiography of Steel Plates 1/4 to 2 in. (6 to 51 mm) Thick with X Rays and 1 to 6 in. (25 to 152 mm) Thick with Cobalt-60

    E689 Standard Reference Radiographs for Ductile Iron Castings

    E802 Standard Reference Radiographs for Gray Iron Castings Up to 4 1/2 in. (114 mm) in Thickness


    E07.01 - Radiology (X and Gamma) Method

    E1000 Standard Guide for Radioscopy

    E1025 Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology

    E1030 Standard Test Method for Radiographic Examination of Metallic Castings

    E1032 Standard Test Method for Radiographic Examination of Weldments

    E1079 Standard Practice for Calibration of Transmission Densitometers

    E1114 Standard Test Method for Determining the Size of Iridium-192 Industrial Radiographic Sources

    E1161 Standard Practice for Radiologic Examination of Semiconductors and Electronic Components

    E1165 Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging

    E1254 Standard Guide for Storage of Radiographs and Unexposed Industrial Radiographic Films

    E1255 Standard Practice for Radioscopy

    E1390 Standard Specification for Illuminators Used for Viewing Industrial Radiographs

    E1411 Standard Practice for Qualification of Radioscopic Systems

    E1416 Standard Test Method for Radioscopic Examination of Weldments

    E1441 Standard Guide for Computed Tomography (CT) Imaging

    E1453 Standard Guide for Storage of Magnetic Tape Media that Contains Analog or Digital Radioscopic Data

    E1570 Standard Practice for Computed Tomographic (CT) Examination

    E1647 Standard Practice for Determining Contrast Sensitivity in Radioscopy

    E1672 Standard Guide for Computed Tomography (CT) System Selection

    E1695 Standard Test Method for Measurement of Computed Tomography (CT) System Performance

    E1734 Standard Practice for Radioscopic Examination of Castings

    E1735 Standard Test Method for Determining Relative Image Quality of Industrial Radiographic Film Exposed to X-Radiation from 4 to 25 MeV

    E1742/E1742M Standard Practice for Radiographic Examination

    E1814 Standard Practice for Computed Tomographic (CT) Examination of Castings

    E1815 Standard Test Method for Classification of Film Systems for Industrial Radiography

    E1817 Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs)

    E1931 Standard Guide for X-Ray Compton Scatter Tomography

    E1935 Standard Test Method for Calibrating and Measuring CT Density

    E2002 Standard Practice for Determining Total Image Unsharpness in Radiology

    E2007 Standard Guide for Computed Radiography

    E2033 Standard Practice for Computed Radiology (Photostimulable Luminescence Method)

    E2104 Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials and Components

    E2445/E2445M Standard Practice for Performance Evaluation and Long-Term Stability of Computed Radiography Systems

    E2446 Standard Practice for Classification of Computed Radiology Systems

    E2597/E2597M Standard Practice for Manufacturing Characterization of Digital Detector Arrays

    E2662 Standard Practice for Radiologic Examination of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications

    E2698 Standard Practice for Radiological Examination Using Digital Detector Arrays

    E2736 Standard Guide for Digital Detector Array Radiology

    E2737 Standard Practice for Digital Detector Array Performance Evaluation and Long-Term Stability

    E2903 Standard Test Method for Measurement of the Effective Focal Spot Size of Mini and Micro Focus X-ray Tubes

    E746 Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems

    E747 Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology

    E801 Standard Practice for Controlling Quality of Radiological Examination of Electronic Devices

    E94 Standard Guide for Radiographic Examination

    E999 Standard Guide for Controlling the Quality of Industrial Radiographic Film Processing


    E06.51 - Performance of Windows, Doors, Skylights and Curtain Walls

    E1105 Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference

    E1233/E1233M Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential

    E1300 Standard Practice for Determining Load Resistance of Glass in Buildings

    E1423 Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems

    E1424 Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen

    E1425 Standard Practice for Determining the Acoustical Performance of Windows, Doors, Skylight, and Glazed Wall Systems

    E1748 Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System

    E1886 Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials

    E1996 Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes

    E2025 Standard Test Method for Evaluating Fenestration Components and Assemblies for Resistance to Impact Energies

    E2068 Standard Test Method for Determination of Operating Force of Sliding Windows and Doors

    E2112 Standard Practice for Installation of Exterior Windows, Doors and Skylights

    E2264 Standard Practice for Determining the Effects of Temperature Cycling on Fenestration Products

    E2268 Standard Test Method for Water Penetration of Exterior Windows, Skylights, and Doors by Rapid Pulsed Air Pressure Difference

    E2319 Standard Test Method for Determining Air Flow Through the Face and Sides of Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen

    E2395 Standard Specification for Voluntary Security Performance of Window and Door Assemblies with and without Glazing Impact

    E2431 Standard Practice for Determining the Resistance of Single Glazed Annealed Architectural Flat Glass to Thermal Loadings

    E2461 Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs

    E2692 Standard Test Method for Structural Performance of Thermal Barriers in Fenestration Products ,

    E283 Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen

    E330/E330M Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference

    E331 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference

    E405 Standard Test Methods for Wear Testing Rotary Operators for Windows

    E547 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference

    E783 Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors

    E987 Standard Test Methods for Deglazing Force of Fenestration Products

    E997 Standard Test Method for Evaluating Glass Breakage Probability Under the Influence of Uniform Static Loads by Proof Load Testing

    E998 Standard Test Method for Structural Performance of Glass in Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Nondestructive Method

    F588 Standard Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact

    F842 Standard Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact


    E05.22 - Surface Burning

    D2859 Standard Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials

    E1317 Standard Test Method for Flammability of Marine Surface Finishes

    E1321 Standard Test Method for Determining Material Ignition and Flame Spread Properties

    E162 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source

    E2058 Standard Test Methods for Measurement of Material Flammability Using a Fire Propagation Apparatus (FPA)

    E2231 Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics

    E2404 Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) Wall or Ceiling Coverings, and of Facings and Wood Veneers Intended to be Applied on Site Over a Wood Substrate, to Assess Surface Burning Characteristics

    E2573 Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics

    E2579 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics

    E2599 Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics

    E2688 Standard Practice for Specimen Preparation and Mounting of Tapes to Assess Surface Burning Characteristics

    E2690 Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics

    E2768 Standard Test Method for Extended Duration Surface Burning Characteristics of Building Materials (30 min Tunnel Test)

    E2988 Standard Practice for Specimen Preparation and Mounting of Flexible Fibrous Glass Insulation for Metal Buildings to Assess Surface Burning Characteristics

    E648 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source

    E84 Standard Test Method for Surface Burning Characteristics of Building Materials

    E970 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source


    D30.09 - Sandwich Construction

    C271/C271M Standard Test Method for Density of Sandwich Core Materials

    C272/C272M Standard Test Method for Water Absorption of Core Materials for Sandwich Constructions

    C273/C273M Standard Test Method for Shear Properties of Sandwich Core Materials

    C274 Standard Terminology of Structural Sandwich Constructions

    C297/C297M Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions

    C363/C363M Standard Test Method for Node Tensile Strength of Honeycomb Core Materials

    C364/C364M Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions

    C365/C365M Standard Test Method for Flatwise Compressive Properties of Sandwich Cores

    C366/C366M Standard Test Methods for Measurement of Thickness of Sandwich Cores

    C393/C393M Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure

    C394/C394M Standard Test Method for Shear Fatigue of Sandwich Core Materials

    C480/C480M Standard Test Method for Flexure Creep of Sandwich Constructions

    C481 Standard Test Method for Laboratory Aging of Sandwich Constructions

    D6416/D6416M Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load

    D6772/D6772M Standard Test Method for Dimensional Stability of Sandwich Core Materials

    D6790/D6790M Standard Test Method for Determining Poisson's Ratio of Honeycomb Cores

    D7249/D7249M Standard Test Method for Facing Properties of Sandwich Constructions by Long Beam Flexure

    D7250/D7250M Standard Practice for Determining Sandwich Beam Flexural and Shear Stiffness

    D7336/D7336M Standard Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials

    D7766/D7766M Standard Practice for Damage Resistance Testing of Sandwich Constructions

    D7956/D7956M Standard Practice for Compressive Testing of Thin Damaged Laminates Using a Sandwich Long Beam Fixture Specimen

    F1645/F1645M Standard Test Method for Water Migration in Honeycomb Core Materials


    D30.06 - Interlaminar Properties

    D5528 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites

    D6115 Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites

    D6415/D6415M Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite

    D6671/D6671M Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites

    D7291/D7291M Standard Test Method for Through-Thickness "Flatwise" Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material

    D7905/D7905M Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites


    D30.05 - Structural Test Methods

    D5766/D5766M Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates

    D5961/D5961M Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates

    D6264/D6264M Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force

    D6484/D6484M Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates

    D6742/D6742M Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates

    D6873/D6873M Standard Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates

    D7136/D7136M Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event

    D7137/D7137M Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates

    D7248/D7248M Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens

    D7332/D7332M Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite

    D7615/D7615M Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates


    D30.04 - Lamina and Laminate Test Methods

    D2344/D2344M Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates

    D3039/D3039M Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials

    D3171 Standard Test Methods for Constituent Content of Composite Materials

    D3410/D3410M Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading

    D3479/D3479M Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials

    D3518/D3518M Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate

    D3552 Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites

    D4255/D4255M Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method

    D5229/D5229M Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials

    D5379/D5379M Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method

    D5448/D5448M Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders

    D5449/D5449M Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders

    D5450/D5450M Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders

    D5467/D5467M Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam

    D5687/D5687M Standard Guide for Preparation of Flat Composite Panels with Processing Guidelines for Specimen Preparation

    D6641/D6641M Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture

    D6856/D6856M Standard Guide for Testing Fabric-Reinforced "Textile" Composite Materials

    D7028 Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)

    D7078/D7078M Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method

    D7264/D7264M Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials


    D30.03 - Constituent/Precursor Properties

    C613 Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction

    D3529M Standard Test Method for Matrix Solids Content and Matrix Content of Composite Prepreg

    D3530 Standard Test Method for Volatiles Content of Composite Material Prepreg

    D3531/D3531M Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg

    D3532/D3532M Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg

    D3800M Standard Test Method for Density of High-Modulus Fibers

    D4018 Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows

    D4102 Standard Test Method for Thermal Oxidative Resistance of Carbon Fibers

    D7750 Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer


    D30.01 - Editorial and Resource Standards

    D3878 Standard Terminology for Composite Materials

    D4762 Standard Guide for Testing Polymer Matrix Composite Materials

    D6507 Standard Practice for Fiber Reinforcement Orientation Codes for Composite Materials

    E1309 Standard Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials in Databases

    E1434 Standard Guide for Recording Mechanical Test Data of Fiber-Reinforced Composite Materials in Databases

    E1471 Standard Guide for Identification of Fibers, Fillers, and Core Materials in Computerized Material Property Databases


    D20.23 - Reinforced Plastic Piping Systems and Chemical Equipment

    C581 Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service

    C582 Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment

    D2105 Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube

    D2143 Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe

    D2310 Standard Classification for Machine-Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

    D2517 Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings

    D2924 Standard Test Method for External Pressure Resistance of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

    D2925 Standard Test Method for Beam Deflection of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow

    D2992 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings

    D2996 Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

    D2997 Standard Specification for Centrifugally Cast "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

    D3262 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe

    D3299 Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks

    D3517 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe

    D3567 Standard Practice for Determining Dimensions of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings

    D3681 Standard Test Method for Chemical Resistance of “Fiberglass” (Glass–Fiber–Reinforced Thermosetting-Resin) Pipe in a Deflected Condition

    D3753 Standard Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells

    D3754 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe

    D3839 Standard Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting-Resin) Pipe

    D3840 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications

    D3982 Standard Specification for Contact Molded “Fiberglass” (Glass Fiber Reinforced Thermosetting Resin) Ducts

    D4024 Standard Specification for Machine Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges

    D4097 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks

    D4161 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals

    D4167 Standard Specification for Fiber-Reinforced Plastic Fans and Blowers

    D4398 Standard Test Method for Determining the Chemical Resistance of Fiberglass-Reinforced Thermosetting Resins by One-Side Panel Exposure

    D5364 Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced (FRP) Plastic Chimney Liners with Coal-Fired Units

    D5365 Standard Test Method for Long-Term Ring-Bending Strain of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

    D5421 Standard Specification for Contact Molded "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges

    D5677 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines

    D5685 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings

    D5813 Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems

    D6041 Standard Specification for Contact-Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings

    D6783 Standard Specification for Polymer Concrete Pipe


    D14.60 - Adhesive Material Classification System

    D2851 Standard Specification for Liquid Optical Adhesive

    D4562 Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen

    D4800 Standard Guide for Classifying and Specifying Adhesives

    D5363 Standard Specification for Anaerobic Single-Component Adhesives (AN)

    D5648 Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity)

    D5649 Standard Test Method for Torque Strength of Adhesives Used on Threaded Fasteners

    D6465 Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants

    D7447 Standard Practice for Symbolizing Adhesive Applications


    D02.L0.11 - Tribiological Properties of Industrial Fluids and Lubricates

    D2422 Standard Classification of Industrial Fluid Lubricants by Viscosity System

    D2670 Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method)

    D2782 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method)

    D2783 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)

    D3233 Standard Test Methods for Measurement of Extreme Pressure Properties of Fluid Lubricants (Falex Pin and Vee Block Methods)

    D4172 Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method)

    D5182 Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)

    D5183 Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine

    D6425 Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine


    D02.L0.07 - Engineering Sciences of High Performance Fluids and Solids (Formally D02.1100)

    D2715 Standard Test Method for Volatilization Rates of Lubricants in Vacuum

    D2717 Standard Test Method for Thermal Conductivity of Liquids

    D2766 Standard Test Method for Specific Heat of Liquids and Solids

    D2878 Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils

    D2879 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope

    D2883 Standard Test Method for Reaction Threshold Temperature of Liquid and Solid Materials

    D2884 Standard Test Method for Yield Stress of Heterogeneous Propellants by Cone Penetration Method

    D3115 Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear

    D3429 Standard Test Method for Solubility of Fixed Gases in Low-Boiling Liquids

    D3523 Standard Test Method for Spontaneous Heating Values of Liquids and Solids (Differential Mackey Test)

    D3711 Standard Test Method for Deposition Tendencies of Liquids in Thin Films and Vapors

    D3825 Standard Test Method for Dynamic Surface Tension by the Fast-Bubble Technique

    D4056 Standard Test Method for Estimation of Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants

    D4486 Standard Test Method for Kinematic Viscosity of Volatile and Reactive Liquids

    D6668 Standard Test Method for Discrimination Between Flammability Ratings of F = 0 and F = 1

    D6793 Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus


    D02.L0.06 - Non-Lubricating Process Fluids

    D5372 Standard Guide for Evaluation of Hydrocarbon Heat Transfer Fluids

    D6200 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis

    D6482 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)

    D6549 Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)

    D6666 Standard Guide for Evaluation of Aqueous Polymer Quenchants

    D6710 Standard Guide for Evaluation of Hydrocarbon-Based Quench Oil

    D7646 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis

    D7665 Standard Guide for Evaluation of Biodegradable Heat Transfer Fluids

    D7863 Standard Guide for Evaluation of Convective Heat Transfer Coefficient of Liquids


    D02.L0.05 - Solid Lubricants

    D2511 Standard Test Method for Thermal Shock Sensitivity of Solid Film Lubricants

    D2625 Standard Test Method for Endurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants (Falex Pin and Vee Method)

    D2649 Standard Test Method for Corrosion Characteristics of Solid Film Lubricants

    D2714 Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine

    D2981 Standard Test Method for Wear Life of Solid Film Lubricants in Oscillating Motion

    D3702 Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine

    D3704 Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion

    D7217 Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine


    D02.L0.04 - Metal Deformation Fluids and Lubricants

    D2881 Standard Classification for Metalworking Fluids and Related Materials

    D3342 Standard Test Method for Dispersion Stability of New (Unused) Rolling Oil Dispersions in Water

    D4042 Standard Test Method for Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of Rolling Oils


    D02.L0.03 - Corrosion Testing of Sheet Metal Processing Fluids

    D1748 Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet


    D02.L0.02 - Machinery Lubricants (Combined into L.01)


    D02.L0.01 - Metal Removal Fluids and Lubricants

    D1662 Standard Test Method for Active Sulfur in Cutting Oils

    D2711 Standard Test Method for Demulsibility Characteristics of Lubricating Oils

    D3705 Standard Test Method for Misting Properties of Lubricating Fluids

    D4627 Standard Test Method for Iron Chip Corrosion for Water–Miscible Metalworking Fluids

    D5619 Standard Test Method for Comparing Metal Removal Fluids Using the Tapping Torque Test Machine

    D6203 Standard Test Method for Thermal Stability of Way Lubricants

    D6553 Standard Test Method for Coolant Compatibility of Way Lubricants


    D02.L0 - Industrial Lubricants and Engineering Sciences of High Performance Fluids and Solids

    D2510 Standard Test Method for Adhesion of Solid Film Lubricants

    D2779 Standard Test Method for Estimation of Solubility of Gases in Petroleum Liquids

    D3827 Standard Test Method for Estimation of Solubility of Gases in Petroleum and Other Organic Liquids

    D6743 Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids

    D7421 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Oils Using High-Frequency, Linear-Oscillation (SRV) Test Machine

    D7755 Standard Practice for Determining the Wear Volume on Standard Test Pieces Used by High-Frequency, Linear-Oscillation (SRV) Test Machine



    D02.J0.06 - Emerging Turbine Fuels

    D7566 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons


    D02.J0.05 - Fuel Cleanliness

    D1094 Standard Test Method for Water Reaction of Aviation Fuels

    D2276 Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling

    D3240 Standard Test Method for Undissolved Water In Aviation Turbine Fuels

    D3948 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer

    D5452 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration

    D7797 Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy – Rapid Screening Method

    D7959 Standard Test Method for Chloride Content Determination


    D02.J0.04 - Additives and Electrical Properties

    D2624 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels

    D4054 Standard Practice for Qualification and Approval of New Aviation Turbine Fuels and Fuel Additives

    D4171 Standard Specification for Fuel System Icing Inhibitors

    D4306 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination

    D4308 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter

    D4865 Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems

    D5001 Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)

    D5006 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels


    D02.J0.03 - Combustion and Thermal Properties

    D1322 Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel

    D3241 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels

    D7739 Standard Practice for Thermal Oxidative Stability Measurement via Quartz Crystal Microbalance


    D02.J0.02 - Spark and Compression Ignition Aviation Engine Fuels

    D6227 Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component

    D6424 Standard Practice for Octane Rating Naturally Aspirated Spark Ignition Aircraft Engines

    D6812 Standard Practice for Ground-Based Octane Rating Procedures for Turbocharged/Supercharged Spark Ignition Aircraft Engines

    D7547 Standard Specification for Hydrocarbon Unleaded Aviation Gasoline

    D7592 Standard Specification for Specification for Grade 94 Unleaded Aviation Gasoline Certification and Test Fuel

    D7719 Standard Specification for High Aromatic Content Unleaded Hydrocarbon Aviation Gasoline

    D7796 Standard Test Method for Analysis of Ethyl tert-Butyl Ether (ETBE) by Gas Chromatography

    D7826 Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives

    D7960 Standard Specification for Unleaded Aviation Gasoline Test Fuel

    D910 Standard Specification for Leaded Aviation Gasolines


    D02.J0.01 - Jet Fuel Specifications

    D1655 Standard Specification for Aviation Turbine Fuels

    D6615 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel

    D6824 Standard Test Method for Determining Filterability of Aviation Turbine Fuel

    D7872 Standard Test Method for Determining the Concentration of Pipeline Drag Reducer Additive in Aviation Turbine Fuels


    D02.J0 - Aviation Fuels

    D6986 Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)

    D7223 Standard Specification for Aviation Certification Turbine Fuel

    D7224 Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer

    D7618 Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel


    D02.96.07 - Integrated Testers, Instrumentation Techniques for In-Service Lubricants

    D7685 Standard Practice for In-Line, Full Flow, Inductive Sensor for Ferromagnetic and Non-ferromagnetic Wear Debris Determination and Diagnostics for Aero-Derivative and Aircraft Gas Turbine Engine Bearings

    D7917 Standard Practice for Inductive Wear Debris Sensors in Gearbox and Drivetrain Applications


    D02.96.06 - Practices and Techniques for Prediction and Determination of Microscopic Wear and Wear-related Properties

    D7670 Standard Practice for Processing In-service Fluid Samples for Particulate Contamination Analysis Using Membrane Filters

    D7684 Standard Guide for Microscopic Characterization of Particles from In-Service Lubricants

    D7690 Standard Practice for Microscopic Characterization of Particles from In-Service Lubricants by Analytical Ferrography

    D7919 Standard Guide for Filter Debris Analysis (FDA) Using Manual or Automated Processes


    D02.96.05 - In-Service Lubricants Particle Counting Practices and Techniques

    D7647 Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction


    D02.96.04 - Guidelines for In-Services Lubricants Analysis

    D7669 Standard Guide for Practical Lubricant Condition Data Trend Analysis

    D7720 Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination

    D7874 Standard Guide for Applying Failure Mode and Effect Analysis (FMEA) to In-Service Lubricant Testing

    D7973 Standard Guide for Monitoring Failure Mode Progression in Plain Bearings


    D02.96.03 - FTIR Testing Practices and Techniques Related to In-Service Lubricants

    D7624 Standard Test Method for Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

    D7844 Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry

    D7889 Standard Test Method for Field Determination of In-Service Fluid Properties Using IR Spectroscopy


    D02.96.02 - Chemistry for the Evaluation of In-Service Lubricants

    D7546 Standard Test Method for Determination of Moisture in New and In-Service Lubricating Oils and Additives by Relative Humidity Sensor

    D7593 Standard Test Method for Determination of Fuel Dilution for In-Service Engine Oils by Gas Chromatography

    D7899 Standard Test Method for Measuring the Merit of Dispersancy of In-Service Engine Oils with Blotter Spot Method


    D02.96 - In-Service Lubricant Testing and Condition Monitoring Services

    D7214 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation

    D7412 Standard Test Method for Condition Monitoring of Phosphate Antiwear Additives in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

    D7414 Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

    D7415 Standard Test Method for Condition Monitoring of Sulfate By-Products in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

    D7416 Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Viscome

    D7417 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)

    D7418 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring

    D7596 Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester

    D7686 Standard Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) Instrument

    D7898 Standard Practice for Lubrication and Hydraulic Filter Debris Analysis (FDA) for Condition Monitoring of Machinery

    E2412 Standard Practice for Condition Monitoring of Used Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry


    D02.14 - Stability and Cleanliness of Liquid Fuels

    D2068 Standard Test Method for Determining Filter Blocking Tendency

    D2274 Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)

    D2709 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge

    D381 Standard Test Method for Gum Content in Fuels by Jet Evaporation

    D4176 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)

    D4625 Standard Test Method for Middle Distillate Fuel Storage Stability at 43 °C (110 °F)

    D4740 Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test

    D4860 Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating)

    D4870 Standard Test Method for Determination of Total Sediment in Residual Fuels

    D525 Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method)

    D5304 Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure

    D5705 Standard Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils

    D6021 Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection

    D6217 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration

    D6426 Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils

    D6468 Standard Test Method for High Temperature Stability of Middle Distillate Fuels

    D6469 Standard Guide for Microbial Contamination in Fuels and Fuel Systems

    D6560 Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products

    D6748 Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer)

    D6974 Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures

    D7060 Standard Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)

    D7061 Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene-Containing Heavy Fuel Oils as Separability Number by an Optical Scanning Device

    D7112 Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)

    D7157 Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (n-Heptane Phase Separation; Optical Detection)

    D7261 Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer

    D7321 Standard Test Method for Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration

    D7451 Standard Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark Ignition Fuels

    D7462 Standard Test Method for Oxidation Stability of Biodiesel (B100) and Blends of Biodiesel with Middle Distillate Petroleum Fuel (Accelerated Method)

    D7463 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water

    D7464 Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing

    D7501 Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT)

    D7525 Standard Test Method for Oxidation Stability of Spark Ignition Fuel—Rapid Small Scale Oxidation Test (RSSOT)

    D7545 Standard Test Method for Oxidation Stability of Middle Distillate Fuels—Rapid Small Scale Oxidation Test (RSSOT)

    D7548 Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products

    D7577 Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends

    D7619 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter

    D7621 Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction

    D7687 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel, Fuel/Water Mixtures, and Fuel-Associated Water with Sample Concentration by Filtration

    D7827 Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene from Heavy Fuel Oils as Separability Number by an Optical Device

    D7847 Standard Guide for Interlaboratory Studies for Microbiological Test Methods

    D7963 Standard Test Method for Determination of Contamination Level of Fatty Acid Methyl Esters in Middle Distillate and Residual Fuels Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method

    D7978 Standard Test Method for Determination of the Viable Aerobic Microbial Content of Fuels and Associated Water—Thixotropic Gel Culture Method

    D873 Standard Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method)


    D02.07 - Flow Properties

    D2161 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity

    D2162 Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards

    D2270 Standard Practice for Calculating Viscosity Index From Kinematic Viscosity at 40 and 100°C

    D2386 Standard Test Method for Freezing Point of Aviation Fuels

    D2500 Standard Test Method for Cloud Point of Petroleum Products

    D2532 Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants

    D2603 Standard Test Method for Sonic Shear Stability of Polymer-Containing Oils

    D2983 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer

    D341 Standard Practice for Viscosity-Temperature Charts for Liquid Petroleum Products

    D3829 Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil

    D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

    D446 Standard Specifications and Operating Instructions for Glass Capillary Kinematic Viscometers

    D4539 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)

    D4683 Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 °C

    D4684 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature

    D4741 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer

    D5133 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique

    D5275 Standard Test Method for Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids

    D5293 Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between –10 °C and –35 °C Using Cold-Cranking Simulator

    D5481 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer

    D5621 Standard Test Method for Sonic Shear Stability of Hydraulic Fluids

    D5771 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)

    D5772 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)

    D5773 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)

    D5853 Standard Test Method for Pour Point of Crude Oils

    D5949 Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)

    D5950 Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)

    D5972 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)

    D5985 Standard Test Method for Pour Point of Petroleum Products (Rotational Method)

    D6022 Standard Practice for Calculation of Permanent Shear Stability Index

    D6278 Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus

    D6371 Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels

    D6616 Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100°C

    D6749 Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)

    D6821 Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer

    D6892 Standard Test Method for Pour Point of Petroleum Products (Robotic Tilt Method)

    D6895 Standard Test Method for Rotational Viscosity of Heavy Duty Diesel Drain Oils at 100°C

    D6896 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature

    D7042 Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)

    D7109 Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus at 30 and 90 Cycles

    D7110 Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures

    D7152 Standard Practice for Calculating Viscosity of a Blend of Petroleum Products

    D7153 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)

    D7154 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)

    D7279 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer

    D7346 Standard Test Method for No Flow Point and Pour Point of Petroleum Products

    D7397 Standard Test Method for Cloud Point of Petroleum Products (Miniaturized Optical Method)

    D7483 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer

    D7683 Standard Test Method for Cloud Point of Petroleum Products (Small Test Jar Method)

    D7689 Standard Test Method for Cloud Point of Petroleum Products (Mini Method)

    D7945 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer

    D97 Standard Test Method for Pour Point of Petroleum Products


    D02.06 - Analysis of Liquid Fuels and Lubricants

    D1093 Standard Test Method for Acidity of Hydrocarbon Liquids and Their Distillation Residues

    D189 Standard Test Method for Conradson Carbon Residue of Petroleum Products

    D2273 Standard Test Method for Trace Sediment in Lubricating Oils

    D2896 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration

    D2982 Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils

    D322 Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation

    D3242 Standard Test Method for Acidity in Aviation Turbine Fuel

    D3339 Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration

    D3607 Standard Test Method for Removing Volatile Contaminants from Used Engine Oils by Stripping

    D4055 Standard Test Method for Pentane Insolubles by Membrane Filtration

    D4530 Standard Test Method for Determination of Carbon Residue (Micro Method)

    D4739 Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration

    D483 Standard Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils

    D524 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products

    D565 Standard Test Method for Carbonizable Substances in White Mineral Oil

    D5770 Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing

    D5800 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method

    D5984 Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration

    D6082 Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils

    D6375 Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method

    D664 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration

    D7317 Standard Test Method for Coagulated Pentane Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method)

    D7579 Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol

    D7795 Standard Test Method for Acidity in Ethanol and Ethanol Blends by Titration

    D7946 Standard Test Method for Initial pH (i-pH)-Value of Petroleum Products

    D892 Standard Test Method for Foaming Characteristics of Lubricating Oils

    D893 Standard Test Method for Insolubles in Used Lubricating Oils

    D91 Standard Test Method for Precipitation Number of Lubricating Oils

    D94 Standard Test Methods for Saponification Number of Petroleum Products

    D974 Standard Test Method for Acid and Base Number by Color-Indicator Titration


    D02.05 - Properties of Fuels, Petroleum Coke and Carbon Material

    D130 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test

    D1405/D1405M Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

    D1500 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)

    D156 Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)

    D2318 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch

    D2319/D2319M Standard Test Method for Softening Point of Pitch (Cube-in-Air Method)

    D2320 Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)

    D2392 Standard Test Method for Color of Dyed Aviation Gasolines

    D240 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter

    D2415 Standard Test Method for Ash in Coal Tar and Pitch

    D2416 Standard Test Method for Coking Value of Tar and Pitch (Modified Conradson)

    D2638 Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer

    D2764 Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch

    D3104 Standard Test Method for Softening Point of Pitches (Mettler Softening Point Method)

    D3338/D3338M Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

    D3461 Standard Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method)

    D3703 Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels, Gasoline and Diesel Fuels

    D4072 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch

    D4292 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke

    D4296 Standard Practice for Sampling Pitch

    D4312 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)

    D4422 Standard Test Method for Ash in Analysis of Petroleum Coke

    D4529 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

    D4616 Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch

    D4715 Standard Test Method for Coking Value of Tar and Pitch (Alcan)

    D4746 Standard Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration

    D4809 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)

    D4868 Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels

    D4892 Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)

    D4893 Standard Test Method for Determination of Pitch Volatility

    D4930 Standard Test Method for Dust Control Material on Calcined Petroleum Coke

    D4931 Standard Test Method for Gross Moisture in Green Petroleum Coke

    D5003 Standard Test Method for Hardgrove Grindability Index (HGI) of Petroleum Coke

    D5004 Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement

    D5018 Standard Test Method for Shear Viscosity of Coal-Tar and Petroleum Pitches

    D5187 Standard Test Method for Determination of Crystallite Size (Lc of Calcined Petroleum Coke by X-Ray Diffraction

    D5502 Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry

    D5709 Standard Test Method for Sieve Analysis of Petroleum Coke

    D6045 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method

    D61 Standard Test Method for Softening Point of Pitches (Cube-in-Water Method)

    D6120 Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature

    D6258 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels

    D6353 Standard Guide for Sampling Plan and Core Sampling for Prebaked Anodes Used in Aluminum Production

    D6354 Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production

    D6374 Standard Test Method for Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure

    D6376 Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-Ray Fluorescence Spectroscopy

    D6447 Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis

    D6558 Standard Test Method for Determination of TGA CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks

    D6559 Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks

    D6744 Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique

    D6745 Standard Test Method for Linear Thermal Expansion of Electrode Carbons

    D6756 Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer

    D6791 Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke

    D6969 Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis

    D6970 Standard Practice for Collection of Calcined Petroleum Coke Samples for Analysis

    D7058 Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer

    D7095 Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip

    D71 Standard Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)

    D7280 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch by Stainless Steel Crucible Filtration

    D7454 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus


    D02.03 - Elemental Analysis

    C1234 Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations

    D1018 Standard Test Method for Hydrogen In Petroleum Fractions

    D1091 Standard Test Methods for Phosphorus in Lubricating Oils and Additives

    D1266 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)

    D129 Standard Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method)

    D1318 Standard Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method)

    D1552 Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and IR Detection

    D1839 Standard Test Method for Amyl Nitrate in Diesel Fuels

    D2622 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry

    D2784 Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp)

    D3120 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry

    D3227 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)

    D3228 Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method

    D3230 Standard Test Method for Salts in Crude Oil (Electrometric Method)

    D3231 Standard Test Method for Phosphorus in Gasoline

    D3237 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy

    D3246 Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry

    D3341 Standard Test Method for Lead in Gasoline - Iodine Monochloride Method

    D3348 Standard Test Method for Rapid Field Test for Trace Lead in Unleaded Gasoline (Colorimetric Method)

    D3605 Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy

    D3701 Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry

    D3831 Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy

    D4045 Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry

    D4046 Standard Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry

    D4047 Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method

    D4294 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry

    D4628 Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry

    D4629 Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection

    D4808 Standard Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy

    D482 Standard Test Method for Ash from Petroleum Products

    D4927 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy

    D4929 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil

    D4951 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry

    D4952 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)

    D5056 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption

    D5059 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy

    D5184 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry

    D5185 Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

    D5291 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants

    D5384 Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)

    D5453 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence

    D5600 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

    D5622 Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis

    D5708 Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry

    D5761 Standard Practice for Emulsification/Suspension of Multiphase Fluid Waste Materials

    D5762 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence

    D5863 Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry

    D6334 Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence

    D6443 Standard Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)

    D6470 Standard Test Method for Salt in Crude Oils (Potentiometric Method)

    D6481 Standard Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy

    D6595 Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry

    D6667 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence

    D6728 Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry

    D6732 Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry

    D6920 Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection

    D7039 Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry

    D7040 Standard Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry

    D7041 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels, and Oils by Online Gas Chromatography with Flame Photometric Detection

    D7111 Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

    D7171 Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy

    D7212 Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter

    D7220 Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry

    D7260 Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants

    D7303 Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry

    D7318 Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration

    D7319 Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography

    D7328 Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection

    D7343 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants

    D7455 Standard Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis

    D7482 Standard Practice for Sampling, Storage, and Handling of Hydrocarbons for Mercury Analysis

    D7578 Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants

    D7620 Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection

    D7622 Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction

    D7623 Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method

    D7691 Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

    D7740 Standard Practice for Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants

    D7751 Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis

    D7757 Standard Test Method for Silicon in Gasoline and Related Products by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry

    D7876 Standard Practice for Practice for Sample Decomposition Using Microwave Heating (With or Without Prior Ashing) for Atomic Spectroscopic Elemental Determination in Petroleum Products and Lubricants

    D808 Standard Test Method for Chlorine in New and Used Petroleum Products (High Pressure Decomposition Device Method)

    D874 Standard Test Method for Sulfated Ash from Lubricating Oils and Additives


    D02.01 - Combustion Characteristics

    D2699 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel

    D2700 Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel

    D2885 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique

    D613 Standard Test Method for Cetane Number of Diesel Fuel Oil

    D6890 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber

    D7170 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Fixed Range Injection Period, Constant Volume Combustion Chamber Method

    D909 Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline


    B07.03 - Aluminum Alloy Wrought Products

    B209 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate

    B209M Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric)

    B210 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes

    B210M Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes (Metric)

    B211 Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire

    B211M Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold-Finished Bar, Rod, and Wire (Metric)

    B221 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes

    B221M Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes (Metric)

    B234 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers

    B234M Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes for Condensers and Heat Exchangers [Metric]

    B236 Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars)

    B236M Standard Specification for Aluminum Bars for Electrical Purposes (Bus Bars) [Metric]

    B241/B241M Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube

    B247 Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings

    B247M Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings [Metric]

    B308/B308M Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles

    B313/B313M Standard Specification for Aluminum and Aluminum-Alloy Round Welded Tubes

    B316/B316M Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods

    B317/B317M Standard Specification for Aluminum-Alloy Extruded Bar, Rod, Tube, Pipe, Structural Profiles, and Profiles for Electrical Purposes (Bus Conductor)

    B345/B345M Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube for Gas and Oil Transmission and Distribution Piping Systems

    B361 Standard Specification for Factory-Made Wrought Aluminum and Aluminum-Alloy Welding Fittings

    B429/B429M Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube

    B483/B483M Standard Specification for Aluminum and Aluminum-Alloy Drawn Tube and Drawn Pipe for General Purpose Applications

    B491/B491M Standard Specification for Aluminum and Aluminum-Alloy Extruded Round Tubes for General-Purpose Applications

    B547/B547M Standard Specification for Aluminum and Aluminum-Alloy Formed and Arc-Welded Round Tube

    B548 Standard Test Method for Ultrasonic Inspection of Aluminum-Alloy Plate for Pressure Vessels

    B594 Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products

    B632/B632M Standard Specification for Aluminum-Alloy Rolled Tread Plate

    B660 Standard Practices for Packaging/Packing of Aluminum and Magnesium Products

    B666/B666M Standard Practice for Identification Marking of Aluminum and Magnesium Products

    B807/B807M Standard Practice for Extrusion Press Solution Heat Treatment for Aluminum Alloys

    B881 Standard Terminology Relating to Aluminum- and Magnesium- Alloy Products

    B918/B918M Standard Practice for Heat Treatment of Wrought Aluminum Alloys

    B926 Standard Method for Pinhole Determination in Aluminum and Aluminum Alloy Plain Foil by Means of a Light Table

    B928/B928M Standard Specification for High Magnesium Aluminum-Alloy Sheet and Plate for Marine Service and Similar Environments

    B945 Standard Practice for Aluminum Alloy Extrusions Press Cooled from an Elevated Temperature Shaping Process for Production of T1, T2, T5 and T10–Type Tempers

    B947 Standard Practice for Hot Rolling Mill Solution Heat Treatment for Aluminum Alloy Plate