SYMPOSIA PAPER Published: 01 January 2007
STP45255S

Fatigue Crack Growth Analyses of Aerospace Threaded Fasteners—Part III: Experimental Crack Growth Behavior

Source

Because fatigue crack growth in a threaded fastener can cause the loss of an aircraft, damage tolerant analyses are required. Because designers commonly perform crack growth analyses on stainless steel fasteners with scant data or simplifying assumptions, or both, the objective of this research was to determine the stress intensity multiplication factor (Y) in the threads of a nut loaded, stainless steel, aerospace, roll-threaded bolt under tensile fatigue conditions as the nondimensionalized crack depth (a/d) approaches zero. Y(a/d) can then be used to improve the accuracy of fatigue crack growth life estimations. Unflawed and flawed aerospace bolts were fatigue tested at a maximum stress (S) ranging from the ultimate tensile strength (UTS) to the surface endurance limit of the test bolt and at several loading ratios of 0.1⩽R⩽0.9. Data collection from the fracture surfaces yielded crack front shape characterization and striation spacing. The shape of the crack front in the unflawed and flawed test bolts was different and both changed as the crack grew. Fifty-one striation spacing measurements ranging from 5.6 × 10-5 to 7.9 × 10-4 mm were found at crack depths of a/d<0.035. These striation measurements were directly related to crack growth rates so that stress intensity factor ranges (ΔK) and in turn Y(a/d) could be estimated.

Author Information

Olsen, Kirk, W.
LORD Corporation, Erie, PA
Rimnac, Clare, M.
Musculoskeletal Mechanics and Materials Laboratories, Case Western Reserve University, Cleveland, OH
Price: $25.00
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Developed by Committee: E08
Pages: 17–28
DOI: 10.1520/STP45255S
ISBN-EB: 978-0-8031-6235-8
ISBN-13: 978-0-8031-3413-3