SYMPOSIA PAPER Published: 01 January 2006

Dynamic Finite Element Modeling of Fracture in Charpy V-Notch Specimens of Weld Material 72W


Dynamic finite element modeling of the fracture behavior of fatigue-precracked and V-notch Charpy specimens was performed using ABAQUS Explicit. The purpose of this modeling effort was to predict the upper shelf energies of full-size precracked and Charpy V-notch full-size and sub-size specimens based on the upper shelf energy (USE) of precracked specimens. To achieve this end, finite element model prediction of the USE of a precracked Charpy specimen was calibrated to the corresponding experimental data. Based on this calibration, a material model incorporating a stress-strain curve and fracture strain properties was developed for the nuclear reactor pressure vessel 72 material. The calibrated material model was then applied to the modeling of crack extension and propagation for predicting the USE of both full-size and sub-size Charpy precracked and V-notch specimens. Finite element modeling of Charpy V-notch models has not been performed previously using this methodology. It was found that the predicted USE of standard and sub-size specimens in both notched-only and precracked conditions based on the USE of third-size specimens were in reasonable agreement with the corresponding experimental data. However, when full-size precracked USE was used as the calibration point, full-size notched USE matched well, half and third-size precracked USE were within normal scatter and half and third-size notched USE did not acceptably match with the corresponding experimental values.

Author Information

McCoy, JH
Entergy Operations, Inc.—Arkansas Nuclear One, Russellville, AR
Kumar, AS
University of Missouri-Rolla, Rolla, MO
Price: $25.00
Contact Sales
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Developed by Committee: E10
Pages: 262–273
DOI: 10.1520/STP37584S
ISBN-EB: 978-0-8031-5518-3
ISBN-13: 978-0-8031-3401-0