SYMPOSIA PAPER Published: 01 January 1968
STP33626S

The Initiation of Hot-Salt Stress Corrosion Cracking of Titanium Alloys

Source

The initial stages of hot-salt stress corrosion cracking of titanium alloys were studied using hot-stage microscopy and cinematography. An incubation period for cracking was observed, the duration of which depends on exposure temperature, salt composition, and alloy composition. For Ti-8Al-1Mo-1V exposed to sodium chloride (NaCl) the incubation period decreased from about 96 hr at 475 F, to 20 hr at 500 F, to 1½ hr at 650 F, to only 10 min at 850 F. This same alloy cracked severely in only 20 min at 475 F when exposed to tin chloride (SnCl2) indicating that the apparent “threshold temperature” for cracking is strongly influenced by chemical environment. At 650 F the incubation period for NaCl cracking of four alloys containing aluminum increased with decreasing aluminum content. Cracks appeared abruptly and propagated rapidly for a short distance, then apparently paused for additional corrosion-embrittlement to occur. Moisture was demonstrated to be a vital ingredient in hot-salt attack, and the presence of absorbed hydrogen in salt-corroded areas has been demonstrated using radiotracer tritium (H3). These results support the hypothesis that absorption of corrosion-produced hydrogen promotes embrittlement and crack initiation.

Author Information

Rideout, SP
Savannah River Laboratory, E. I. du Pont de Nemours and Co., Aiken, S. C.
Price: $25.00
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Developed by Committee: B10
Pages: 205–217
DOI: 10.1520/STP33626S
ISBN-EB: 978-0-8031-4571-9
ISBN-13: 978-0-8031-0748-9