SYMPOSIA PAPER Published: 01 January 1985
STP32918S

Pavement Friction Measurements and Vehicle Control Reparations for Nontangent Road Sections

Source

Several measurement systems were evaluated to determine their applicability for measuring wet-pavement friction on transitional roadway sections. It was found that the two-wheel trailer is capable of such measurements if it is instrumented to measure the vertical dynamic test-wheel load as well as the longitudinal drag force during locked-wheel braking. A less desirable approach is to use accelerometers to measure the lateral and vertical accelerations on the trailer and compute the wheel load from these measurements.

There is greater friction deterioration on curves, ramps, intersections, and other transitional roadway areas from traffic wear and the environment than on tangent sections. When these roadway sections become slick or have marginal skid resistance, they can be milled, grooved, resurfaced, or overlaid applying a sprinkle treatment to restore adequate friction characteristics. This paper addresses both the measurement and the restoration aspects of this problem.

Author Information

Balmer, GG
Federal Highway Administration, Turner-Fairbank Highway Research Center, McLean, VA
Zimmer, RA
Texas Transportation Institute, Texas A&M University, College Station, TX
Tonda, RD
Texas Transportation Institute, Texas A&M University, College Station, TX
Price: $25.00
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Developed by Committee: D04
Pages: 33–50
DOI: 10.1520/STP32918S
ISBN-EB: 978-0-8031-4945-8
ISBN-13: 978-0-8031-0424-2