SYMPOSIA PAPER Published: 01 April 2012
STP152920120006

Dynamic Recrystallization in Zirconium Alloys

Source

In this investigation, the characteristics of dynamic recrystallization (DRX) in five Zr-alloys, namely, commercial pure zirconium (CP-Zr), Zircaloy-2 (Zr–Sn), Zr-2.5Nb (Zr–Nb), Zr-2.5Nb-0.5Cu (Zr–Nb-Cu), and Zr-1Nb-1Sn-0.1Fe (Zr–Nb–Sn–Fe), have been examined. For this purpose, processing maps were constructed using strain rate sensitivity (m) data as a function of temperature and strain rate. This has been done using compression tests carried out at constant true strain rate. The processing maps revealed the bounds of DRX domain as iso-contour of m in strain rate-temperature plane. Optical microscopy and transmission electron microscopy (TEM) were used to analyze the evolution of the microstructure and to ascertain the nature of dislocation mechanisms in deformed and quenched samples from the DRX domain. For all the alloys studied, TEM revealed complete modification of β-transformed microstructure to an equiaxed morphology containing dislocation substructure within. The variation of grain size with strain rate and temperature, high ductility, and a linear variation of log(grain size) with log(Z) (where Z is the Zener-Hollomon parameter) are some important characteristic features associated with DRX domains of Zr-alloys. While Nb exhibited strong influence on lowering the strain rate for the occurrence of DRX of CP-Zr, Sn addition (Zr–Sn) did not alter DRX characteristics. TEM observations neither revealed the nature of nucleation event nor identified the dislocation mechanism involved in the DRX process. In order to ascertain the rate controlling dislocation mechanism, the flow stress data were analyzed using a model of thermally activated flow. On the basis of the magnitudes of activation energy and apparent activation area, the cross-slip of screw dislocation has been identified as the rate controlling mechanism involved in the DRX process. The activation energy has been found to increase by alloying elements, which is expected to lower stacking fault energy (SFE) and increase separation between the partials. Further analysis of the data using Friedel's model revealed that the activation energy for the cross-slip process can be decomposed into two parts—one related to the process of forming a constriction in the dissociated dislocations and the other needed for recombining the dissociated dislocations. While the former component (related to SFE) is dominant in Nb containing Zr-alloys, both the components are involved in controlling the deformation behavior of CP-Zr and Zr–Sn alloys. The effects of alloying elements on DRX characteristics and on the evolution of dislocation structure have been rationalized on the basis of cross-slip as the rate controlling dislocation mechanism in a qualitative manner. The importance of dynamic recovery in DRX process has been emphasized in view of this.

Author Information

Chakravartty, J., K.
Mechanical Metallurgy Section, Materials Group, Bhabha Atomic Research Centre, Mumbai, IN
Kapoor, R.
Mechanical Metallurgy Section, Materials Group, Bhabha Atomic Research Centre, Mumbai, IN
Sarkar, A.
Mechanical Metallurgy Section, Materials Group, Bhabha Atomic Research Centre, Mumbai, IN
Banerjee, S.
Department of Atomic Energy, Mumbai, IN
Price: $25.00
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Developed by Committee: B10
Pages: 121–149
DOI: 10.1520/STP152920120006
ISBN-EB: 978-0-8031-8893-8
ISBN-13: 978-0-8031-7515-0