SYMPOSIA PAPER Published: 01 January 1994
STP13247S

Computer Simulation of Road-Vehicle Dynamic Interaction Forces of Three- and Four-Axle Trucks

Source

The road-vehicle interaction forces were studied with two truck models, one with four axles (twelve tires) and the other with three axles (ten tires). The truck models were created using the multibody system analyzing program (ADAMS). The input data for the models are based on real values derived from the truck manufacturer. Two modifications of suspensions were made, one with three dampers. The suspensions were multileaf, parabolic, and air suspensions.

The road profiles were measured by VTT. The model computes instantaneous locations, speeds, and road contact points of tires. Then it computes vertical and longitudinal forces acting on tire-road contact surfaces as a function of tire stiffness, damping, and longitudinal slips. These forces are then used to study repeatability of dynamic axle loads along the road profile.

Author Information

Huhtala, M
Technical Research Center of Finland (VTT), Road, Traffic and Geotechnical Laboratory, Espoo, Finland
Vesimaki, M
MBS-Models, Inc., Espoo, Finland
Halonen, P
Technical Research Center of Finland (VTT), Road, Traffic and Geotechnical Laboratory, Espoo, Finland
Price: $25.00
Contact Sales
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Developed by Committee: E17
Pages: 36–51
DOI: 10.1520/STP13247S
ISBN-EB: 978-0-8031-5279-3
ISBN-13: 978-0-8031-1893-5