ASTM's road and paving standards provide the specifications and test methods pertinent to the material, physical, mechanical, performance, and application requirements of road surfaces and pavements. These geotechnical surfaces are laid down on specified areas intended to sustain either or both foot and vehicular traffic. The types of paving covered by these standards are typically made of asphalt, concrete, and bituminous materials. These road and paving standards allow geotechnical engineering firms and construction companies to examine and evaluate paving materials to ensure strength and durability towards safe application and use.

Road Standards and Paving Standards

ASTM's road and paving standards provide the specifications and test methods pertinent to the material, physical, mechanical, performance, and application requirements of road surfaces and pavements. These geotechnical surfaces are laid down on specified areas intended to sustain either or both foot and vehicular traffic. The types of paving covered by these standards are typically made of asphalt, concrete, and bituminous materials. These road and paving standards allow geotechnical engineering firms and construction companies to examine and evaluate paving materials to ensure strength and durability towards safe application and use.

Jump to:

Aggregate Specifications

D6155-19 Standard Specification for Nontraditional Coarse Aggregates for Asphalt Paving Mixtures

D448-12(2017) Standard Classification for Sizes of Aggregate for Road and Bridge Construction

D242/D242M-19 Standard Specification for Mineral Filler for Asphalt Mixtures

D692/D692M-20 Standard Specification for Coarse Aggregate for Asphalt Paving Mixtures

D2940/D2940M-20 Standard Specification for Graded Aggregate Material for Bases or Subbases for Highways or Airports

D693-03a Standard Specification for Crushed Aggregate for Macadam Pavements (Withdrawn 2008)

D8140-18 Standard Guide for the Use of Foundry Sand in Asphalt Mixtures

D1073-16(2022) Standard Specification for Fine Aggregate for Asphalt Paving Mixtures

D1139/D1139M-22 Standard Specification for Aggregate for Single or Multiple Asphalt Surface Treatments

D5106-22 Standard Specification for Steel Slag Aggregates for Asphalt Paving Mixtures

Aggregate Tests

D7370/D7370M-14(2021) Standard Test Method for Determination of Relative Density and Absorption of Fine, Coarse, and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion

D8378/D8378M-21 Standard Test Method for Potential Expansion of Steel Slag from Hydration Reactions by Autoclave

D7428-15 Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus

D3042-17 Standard Test Method for Insoluble Residue in Carbonate Aggregates

D6928-17 Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus

D546-17 Standard Test Method for Sieve Analysis of Mineral Filler for Asphalt Paving Mixtures

D4469-17 Standard Practice for Calculating Percent Asphalt Absorption by the Aggregate in Asphalt Mixtures

D3319-11(2017) Standard Practice for the Accelerated Polishing of Aggregates Using the British Wheel

D5821-13(2017) Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate

D3744/D3744M-18 Standard Test Method for Aggregate Durability Index

D4792/D4792M-13(2019) Standard Test Method for Potential Expansion of Aggregates from Hydration Reactions

C1252-17 Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)

D2419-14 Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate

D3398-00(2006) Standard Test Method for Index of Aggregate Particle Shape and Texture (Withdrawn 2014)

D5148-10 Standard Test Method for Centrifuge Kerosine Equivalent (Withdrawn 2018)

D7172-14 Standard Test Method for Determining the Relative Density (Specific Gravity) and Absorption of Fine Aggregates Using Infrared (Withdrawn 2022)

D5711-03 Standard Test Method for Determining the Adherent Coating on Coarse Aggregates (Withdrawn 2012)

D4791-19 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate

D5444-15 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate

Aircraft Friction

E3266-20 Standard Guide for Friction-Limited Aircraft Braking Measurements and Reporting

E3188-19 Standard Terminology for Aircraft Braking Performance

Analysis of Asphalt Mixtures

D4125/D4125M-21 Standard Test Methods for Asphalt Content of Asphalt Mixtures by the Nuclear Method

PS136-02 Standard Provisional Test Method for Quantitative Extraction and Recovery of Asphalt Binder from Asphalt Mixtures

D1856-21 Standard Test Method for Recovery of Asphalt from Solution by Abson Method

D8159-19 Standard Test Method for Automated Extraction of Asphalt Binder from Asphalt Mixtures

D6847-02 Standard Test Method for Quantitative Extraction and Recovery of Asphalt Binder from Asphalt Mixtures (Withdrawn 2010)

D1461-17 Standard Test Method for Moisture or Volatile Distillates in Asphalt Mixtures

D6390-11(2017) Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures

D6307-19 Standard Test Method for Asphalt Content of Asphalt Mixture by Ignition Method

D2172/D2172M-17e1 Standard Test Methods for Quantitative Extraction of Asphalt Binder from Asphalt Mixtures

D5404/D5404M-21 Standard Practice for Recovery of Asphalt Binder from Solution Using the Rotary Evaporator

D4887/D4887M-11(2021)e1 Standard Practice for Preparation of Viscosity Blends for Hot Recycled Asphalt Materials

D7906-22 Standard Practice for Recovery of Asphalt Binder from Solution Using Toluene and the Rotary Evaporator

Asphalt Specifications

D6626-15(2021) Standard Specification for Performance-Graded Trinidad Lake Modified Asphalt Binder

D4552/D4552M-20 Standard Classification for Hot-Mix Recycling Agents

D6373-21a Standard Specification for Performance-Graded Asphalt Binder

D8239-21a Standard Specification for Performance-Graded Asphalt Binder Using the Multiple Stress Creep and Recovery (MSCR) Test

D8125-18 Standard Specification for Re-Refined Engine Oil Bottoms (REOB)/Vacuum Tower Asphalt Extender (VTAE)

D3381/D3381M-18 Standard Specification for Viscosity-Graded Asphalt Binder for Use in Pavement Construction

D2027/D2027M-19 Standard Specification for Cutback Asphalt (Medium-Curing Type)

D946/D946M-20 Standard Specification for Penetration-Graded Asphalt Binder for Use in Pavement Construction

D6114/D6114M-19 Standard Specification for Asphalt-Rubber Binder

D2399-21 Standard Practice for Selection of Cutback Asphalts

D2026/D2026M-15(2021)e1 Standard Specification for Cutback Asphalt (Slow-Curing Type)

D3141/D3141M-21 Standard Specification for Asphalt for Undersealing Portland-Cement Concrete Pavements

D2028/D2028M-15(2021)e1 Standard Specification for Cutback Asphalt (Rapid-Curing Type)

D6154-15(2021)e1 Standard Specification for Chemically Modified Asphalt Cement for Use in Pavement Construction

D4311/D4311M-21 Standard Practice for Determining Asphalt Volume Correction to a Base Temperature

D5710/D5710M-22 Standard Specification for Trinidad Lake Modified Asphalt

Asphalt Surface Treatments

D1369-19 Standard Practice for Quantities of Materials for Asphalt-Aggregate Surface Treatments

D6372-15 Standard Practice for Design, Testing, and Construction of Microsurfacing

D2995-14 Standard Practice for Estimating Application Rate and Residual Application Rate of Bituminous Distributors

D5360-15 Standard Practice for Design and Construction of Bituminous Surface Treatments

D7564/D7564M-16 Standard Practice for Construction of Asphalt-Rubber Cape Seal

D7000-19a Standard Test Method for Sweep Test of Emulsified Asphalt Surface Treatment Samples

D5624-13 Standard Practice for Determining the Transverse-Aggregate Spread Rate for Surface Treatment Applications (Withdrawn 2022)

D3910-21 Standard Practices for Design, Testing, and Construction of Slurry Seal

Bridges and Structures

D3743-84(2000) Standard Terminology Relating To Bridge Deck and Substructure Protection (Withdrawn 2004)

D5484-99 Standard Specification for Steel Grid Bridge Flooring (Withdrawn 2004)

D5339-94(1998) Standard Practice for Quality Assurance Plan for Structural Steel Fabrication for Highway Structures (Withdrawn 2005)

D6153-15 Standard Specification for Materials for Bridge Deck Waterproofing Membrane Systems

D6087-08(2015)e1 Standard Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar

D5977-15 Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures

D4071-84(2016) Standard Practice for Use of Portland Cement Concrete Bridge Deck Water Barrier Membrane Systems

D4580/D4580M-12(2018) Standard Practice for Measuring Delaminations in Concrete Bridge Decks by Sounding

D8138-18 Standard Specification for Preformed Silicone Joint Sealing System for Bridges

D4014-03(2018) Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges

D3633/D3633M-12(2019) Standard Test Method for Electrical Resistivity of Membrane-Pavement Systems

D5212-03 Standard Specification for High Load Rotational Confined Elastomeric Bearings for Bridges and Structures (Withdrawn 2004)

D6275-98(2003) Standard Practice for Laboratory Testing of Bridge Decks (Withdrawn 2004)

D6297-20 Standard Specification for Asphaltic Plug Joints for Bridges

D4788-03(2022) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography

Calcium and Sodium Chlorides and Other Deicing Materials

D345-02(2010) Standard Test Method for Sampling and Testing Calcium Chloride for Roads and Structural Applications (Withdrawn 2019)

D632-12(2020)e1 Standard Specification for Sodium Chloride

D98-15(2021) Standard Specification for Calcium Chloride

Cold Mix Asphalts

D7229-08(2013)e1 Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor (Withdrawn 2021)

D4215-21 Standard Specification for Cold-Mixed, Cold-Laid Asphalt Paving Mixtures

D6627/D6627M-11(2016) Standard Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures

D7196-18 Standard Test Method for Raveling Test of Cold-Mixed Emulsified Asphalt Samples

D6704-22 Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material

Durability and Distillation Tests

D402/D402M-14 Standard Test Method for Distillation of Cutback Asphalt

D1754/D1754M-20 Standard Test Method for Effects of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)

D2872-22 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test)

D6521-22 Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)

D243/D243M-22 Standard Test Method for Residue of Specified Penetration

Effect of Water and Other Elements on Asphalt Coated Aggregates

D3625/D3625M-20 Standard Practice for Effect of Water on Asphalt-Coated Aggregate Using Boiling Water

D1074-17 Standard Test Method for Compressive Strength of Asphalt Mixtures

D7870/D7870M-20 Standard Practice for Moisture Conditioning Compacted Asphalt Mixture Specimens by Using Hydrostatic Pore Pressure

D1075-11 Standard Test Method for Effect of Water on Compressive Strength of Compacted Bituminous Mixtures (Withdrawn 2019)

D4867/D4867M-09(2014) Standard Test Method for Effect of Moisture on Asphalt Concrete Paving Mixtures

Emulsified Asphalt Specifications

D5505-14(2020) Standard Practice for Classifying Emulsified Recycling Agents

D977-20 Standard Specification for Emulsified Asphalt

D2397/D2397M-20 Standard Specification for Cationic Emulsified Asphalt

D3628-15(2021) Standard Practice for Selection and Use of Emulsified Asphalts

Emulsified Asphalt Test

D5545-94e1 Test Method for Identification of Cationic Slow-Set Emulsified Asphalts (Withdrawn 1998)

D6930-19 Standard Test Method for Settlement and Storage Stability of Emulsified Asphalts

D7497-21 Standard Practice for Recovering Residue from Emulsified Asphalt Using Low-Temperature Evaporative Technique

D6929-21 Standard Practice for Evaluating the Effect of Freezing on Emulsified Asphalts

D6937-16 Standard Test Method for Determining Density of Emulsified Asphalt

D6936-17 Standard Test Method for Determining Demulsibility of Emulsified Asphalt

D7402-09(2017) Standard Practice for Identifying Cationic Emulsified Asphalts

D7226-13(2017) Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer

D6935-17 Standard Test Method for Determining Cement Mixing of Emulsified Asphalt

D7496-18 Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer

D7403-19 Standard Test Method for Determination of Residue of Emulsified Asphalt by Low Temperature Vacuum Distillation

D7404-19 Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Balance Analyzer

D6998-19 Standard Practice for Evaluating Aggregate Coating using Emulsified Asphalts

D244-09(2017) Standard Test Methods and Practices for Emulsified Asphalts

D6997-12(2020) Standard Test Method for Distillation of Emulsified Asphalt

D6999-19 Standard Practice for Miscibility of Emulsified Asphalts

D6933-22 Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)

D8467-22 Standard Test Method for Determination of Emulsified Asphalt Residue By Quick Boil

D6934-22 Standard Test Method for Residue by Evaporation of Emulsified Asphalt

D7944-22 Standard Practice for Recovery of Emulsified Asphalt Residue Using a Vacuum Oven

Field Methods for Measuring Tire Pavement Friction

E1960-07(2015) Standard Practice for Calculating International Friction Index of a Pavement Surface

E1890-11(2015) Standard Guide for Validating New Area Reference Skid Measurement Systems and Equipment

E2100-04(2015) Standard Practice for Calculating the International Runway Friction Index (Withdrawn 2019)

E3145-19 Standard Test Method for User-Level Calibration of Dynamic Friction Tester (DF Tester)

E2883-13(2019) Standard Guide for Evaluation and Calibration, Continuous Friction Measurement Equipment (CFME)

E2666-09(2019) Standard Practice for Correlations of Mu Values of Continuous Friction Measurement Equipment to Determine Maintenance Levels for Use at Airports

E445/E445M-15(2019) Standard Test Method for Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped with Full-Scale Tires

E1337-19 Standard Test Method for Determining Longitudinal Peak Braking Coefficient (PBC) of Paved Surfaces Using Standard Reference Test Tire

E2341/E2341M-05(2019) Standard Test Method for Determining the Stopping Distance Number by Initial Speed and Stopping Distance at Traffic Incident Sites

E2101-15(2020) Standard Test Method for Measuring the Frictional Properties of Winter-Contaminated Pavement Surfaces Using an Averaging-Type Spot Measuring Decelerometer

E274/E274M-15(2020) Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire

E670-09(2020) Standard Test Method for Testing Side Force Friction on Paved Surfaces Using the Mu-Meter

E1859/E1859M-11(2020) Standard Test Method for Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique

E556/E556M-11(2020) Standard Test Method for Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform (User Level)

E1911-19 Standard Test Method for Measuring Surface Frictional Properties Using the Dynamic Friction Tester

E503/E503M-88(2004) Standard Test Methods for Measurement of Skid Resistance on Paved Surfaces Using a Passenger Vehicle Diagonal Braking Technique (Withdrawn 2010)

E2340/E2340M-11(2021) Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique

E2793-22 Standard Guide for Evaluation, Calibration, and Correlation of E274 Friction Measurement Systems and Equipment

Formed In-Place Sealants for Joints and Cracks in Pavements

D5078/D5078M-11(2021) Standard Specification for Crack Filler, Hot-Applied, for Asphalt Concrete and Portland Cement Concrete Pavements

D5893/D5893M-16(2021) Standard Specification for Cold-Applied, Single-Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements

D5249-10(2021) Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland Cement Concrete and Asphalt Joints

D7116-16(2021) Standard Specification for Joint Sealants, Hot Applied, Jet Fuel Resistant Types, for Portland Cement Concrete Pavements

D6690-21 Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements

D5167-13(2018) Standard Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation

D1985-13(2019) Standard Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks

D8260-20 Standard Specification for Hot-Applied Asphalt Aggregate-Filled Mastic

D5329-20 Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements

D3406-95(2006) Standard Specification for Joint Sealant, Hot-Applied, Elastomeric-Type, for Portland Cement Concrete Pavements (Withdrawn 2013)

D3569-95(2006) Standard Specification for Joint Sealant, Hot-Applied, Elastomeric, Jet-Fuel-Resistant-Type for Portland Cement Concrete Pavements (Withdrawn 2006)

D3581-02 Standard Specification for Joint Sealant, Hot-Applied, Jet-Fuel-Resistant Type, for Portland Cement Concrete and Tar-Concrete Pavements (Withdrawn 2006)

D1854-02 Standard Specification for Jet-Fuel-Resistant Concrete Joint Sealer, Hot-Applied Elastic Type (Withdrawn 2006)

D5535-98(2003) Standard Terminology Relating to Formed-in-Place Sealants for Joints and Cracks in Pavements (Withdrawn 2009)

Fundamental/Mechanistic Tests

D8303-20 Standard Test Method for Determining Thermal Cracking Properties of Asphalt Mixtures Through Measurement of Thermally Induced Stress and Strain

D7313-20 Standard Test Method for Determining Fracture Energy of Asphalt Mixtures Using the Disk-Shaped Compact Tension Geometry

D4123-82(1995) Standard Test Method for Indirect Tension Test for Resilient Modulus of Bituminous Mixtures (Withdrawn 2003)

D8237-21 Standard Test Method for Determining Fatigue Failure of Asphalt-Aggregate Mixtures with the Four-Point Beam Fatigue Device

D8044-16 Standard Test Method for Evaluation of Asphalt Mixture Cracking Resistance using the Semi-Circular Bend Test (SCB) at Intermediate Temperatures

D6931-17 Standard Test Method for Indirect Tensile (IDT) Strength of Asphalt Mixtures

D8225-19 Standard Test Method for Determination of Cracking Tolerance Index of Asphalt Mixture Using the Indirect Tensile Cracking Test at Intermediate Temperature

D3496-99(2005) Standard Practice for Preparation of Bituminous Mixture Specimens for Dynamic Modulus Testing (Withdrawn 2010)

D3497-79(2003) Standard Test Method for Dynamic Modulus of Asphalt Mixtures (Withdrawn 2009)

D3387-11 Standard Test Method for Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S. Corps of Engineers Gyratory Testing Machine (GTM) (Withdrawn 2020)

D7552-09(2014) Standard Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer

D7312-10 Standard Test Method for Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST) (Withdrawn 2019)

D7460-10 Standard Test Method for Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending (Withdrawn 2019)

D7369-20 Standard Test Method for Determining the Resilient Modulus of Asphalt Mixtures by Indirect Tension Test

Highway Traffic Control Materials

D6359-99 Standard Specification for Minimum Retroreflectance of Newly Applied Pavement Marking Using Portable Hand-Operated Instruments (Withdrawn 2006)

D7942-15 Standard Specification for Thermoplastic Pavement Markings in Non Snow Plow Areas

D4280-18 Standard Specification for Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers

D4956-19 Standard Specification for Retroreflective Sheeting for Traffic Control

D6628-16 Standard Specification for Color of Pavement Marking Materials

D8379/D8379M-21 Standard Practice for Evaluating Nighttime Retroreflective Sheeting Effectiveness Using Positive-Contrast Textual Sign Scenario Performance Analysis

D4383-21 Standard Specification for Plowable, Raised Retroreflective Pavement Markers

D4505-12(2022) Standard Specification for Preformed Retroreflective Pavement Marking Tape for Extended Service Life

D4592-12(2022) Standard Specification for Preformed Retroreflective Pavement Marking Tape for Limited Service Life

D7585/D7585M-10(2022) Standard Practice for Evaluating Retroreflective Pavement Markings Using Portable Hand-Operated Instruments

Mechanical Tests of Asphalt Mixtures

D6927-15 Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures

D1560-15 Standard Test Methods for Resistance to Deformation and Cohesion of Asphalt Mixtures by Means of Hveem Apparatus

D8079-16 Standard Practice for Preparation of Compacted Slab Asphalt Mix Samples Using a Segmented Rolling Compactor

D8259/D8259M-21 Standard Test Method for Rotary Wheel Testing (RWT) of Compacted Asphalt Mixtures

D6926-20 Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus

D8292-20 Standard Test Method for Permanent Deformation Behavior and Rutting Resistance of Compacted Asphalt Mix in the Modified Loaded Wheel Tracker Test Utilizing Controlled Confining Pressure

D7981-20 Standard Practice for Compaction of Prismatic Asphalt Specimens by Means of the Shear Box Compactor

D7115-20 Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading

D3202-94(2004)e1 Standard Practice for Preparation of Bituminous Mixture Beam Specimens by Means of the California Kneading Compactor (Withdrawn 2007)

D1561/D1561M-13 Standard Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor (Withdrawn 2022)

D4013-09 Standard Practice for Preparation of Test Specimens of Bituminous Mixtures by Means of Gyratory Shear Compactor (Withdrawn 2013)

D6925-15 Standard Test Method for Preparation and Determination of the Relative Density of Asphalt Mix Specimens by Means of the Superpave Gyratory Compactor

D5581-07A(2021)e1 Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 in. Diameter Specimen)

Methodology for Analyzing Pavement Roughness

E1500-93 Practice for Computing Mean Square Numerics from Road Surface Elevation Profile Records (Withdrawn 1998)

E3028-16e1 Standard Practice for Computing Wheelchair Pathway Roughness Index as Related to Comfort, Passability, and Whole Body Vibrations from Longitudinal Profile Measurements

E1170-97(2017) Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces

E2034-99(2017) Standard Practices for Simulating Truck Response to Longitudinal Profiles of Vehicular Traveled Surfaces

E1927-98(2018) Standard Guide for Conducting Subjective Pavement Ride Quality Ratings

E1489-08(2019) Standard Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device

E2955-13(2019) Standard Practice for Simulating Profilograph Response to Longitudinal Profiles of Traveled Surfaces

E1926-08(2021) Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements

Methods for Measuring Profile and Roughness

E1448/E1448M-09(2015) Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness

E1703/E1703M-10(2015) Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge

E1082-90(2017) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness

E1364-95(2017) Standard Test Method for Measuring Road Roughness by Static Level Method

E1215-93(2017) Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness

E1274-18 Standard Test Method for Measuring Pavement Roughness Using a Profilograph

E950/E950M-09(2018) Standard Test Method for Measuring the Longitudinal Profile of Traveled Surfaces with an Accelerometer-Established Inertial Profiling Reference

E2560-17 Standard Specification for Data Format for Pavement Profile

E2133-03(2020) Standard Test Method for Using a Rolling Inclinometer to Measure Longitudinal and Transverse Profiles of a Traveled Surface

Methods of Sampling

D75/D75M-19 Standard Practice for Sampling Aggregates

D979/D979M-15 Standard Practice for Sampling Bituminous Paving Mixtures

D5361/D5361M-16 Standard Practice for Sampling Compacted Asphalt Mixtures for Laboratory Testing

D3665-12(2017) Standard Practice for Random Sampling of Construction Materials

D140/D140M-16 Standard Practice for Sampling Asphalt Materials

Miscellaneous Asphalt Tests

D3143-98 Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus (Withdrawn 2007)

D6608-20 Standard Practice for the Identification of Trinidad Lake Asphalt in Asphalt Mixes

D7553-15(2021) Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide

D70/D70M-21 Standard Test Method for Specific Gravity and Density of Semi-Solid Asphalt Binder (Pycnometer Method)

D3289-17 Standard Test Method for Density of Semi-Solid and Solid Asphalt Materials (Nickel Crucible Method)

D4124-09(2018) Standard Test Method for Separation of Asphalt into Four Fractions

D3142/D3142M-17 Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method

D8188-18 Standard Test Method for Determination of Density and Relative Density of Asphalt, Semi-Solid Bituminous Materials, and Soft-Tar Pitch by Use of a Digital Density Meter (U-Tube)

D5546-09 Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge (Withdrawn 2017)

D3143/D3143M-19 Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus

D8254-19 Standard Test Method for Flash and Fire Points of Asphalt by Cleveland Open Cup Tester

D8189-19 Standard Test Method for Tackiness of Asphalt Binders and Emulsified Asphalt Residue Using the Dynamic Shear Rheometer (DSR)

D3279-19 Standard Test Method for n-Heptane Insolubles

D8078-18e1 Standard Test Method for Ash Content of Asphalt and Emulsified Asphalt Residues

D6703-19 Standard Test Method for Automated Heithaus Titrimetry

D7173-20 Standard Practice for Determining the Separation Tendency of Polymer from Polymer-Modified Asphalt

D2042-22 Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene or Toluene

Pavement Management and Data Needs

E1656/E1656M-11(2016) Standard Guide for Classification of Automated Pavement Condition Survey Equipment

E3303-21 Standard Practice for Generating Pavement Surface Cracking Indices from Digital Images

E1166-00(2019) Standard Guide for Network Level Pavement Management

E1777-09(2019) Standard Guide for Prioritization of Data Needs for Pavement Management

E1778-98a(2019) Standard Terminology Relating to Pavement Distress

E1889-97(2019) Standard Guide for Pavement Management Implementation

E2840-11(2019) Standard Practice for Pavement Condition Index Surveys for Interlocking Concrete Roads and Parking Lots

D6433-20 Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys

D5340-20 Standard Test Method for Airport Pavement Condition Index Surveys

Pavement Surface Contaminant Measurement

E3208-20 Standard Specification for Minimum Equipment Requirements for Mobile Surface Contaminant Classification and Measurement Equipment

Pavement Testing and Evaluation

E2835-21 Standard Test Method for Measuring Deflections Using a Portable Impulse Plate Load Test Device

D1196/D1196M-21 Standard Test Method for Nonrepetitive Static Plate Tests of Soils and Flexible Pavement Components for Use in Evaluation and Design of Airport and Highway Pavements

D1195/D1195M-21 Standard Test Method for Repetitive Static Plate Tests of Soils and Flexible Pavement Components for Use in Evaluation and Design of Airport and Highway Pavements

D6951/D6951M-18 Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications

E3209/E3209M-20 Standard Test Method for Pavement Thickness by Magnetic Pulse Induction

D4602-93(2020) Standard Guide for Nondestructive Testing of Pavements Using Cyclic-Loading Dynamic Deflection Equipment

D4748-10(2020) Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar

E2583-07(2020) Standard Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD)

D4695-03(2020) Standard Guide for General Pavement Deflection Measurements

D5858-96(2020) Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory

D4694-09(2020) Standard Test Method for Deflections with a Falling-Weight-Type Impulse Load Device

D7228-06a(2020) Standard Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures

E3013/E3013M-17(2022) Standard Test Method for Evaluating Concrete Pavement Dowel Bar Alignment Using Magnetic Pulse Induction

Plant-Mixed Asphalt Surfaces and Bases

D6932/D6932M-21 Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Asphalt Mixtures

PS129-01 Standard Provisional Test Method for Measurement of Permeability of Bituminous Paving Mixtures Using a Flexible Wall Permeameter (Withdrawn 2003)

D7064/D7064M-21 Standard Practice for Open-Graded Friction Course (OGFC) Asphalt Mixture Design

D2489/D2489M-16 Standard Test Method for Estimating Degree of Particle Coating of Asphalt Mixtures

D3515-01 Standard Specification for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures (Withdrawn 2009)

D995-95b(2002) Standard Specification for Mixing Plants for Hot-Mixed, Hot-Laid Bituminous Paving Mixtures (Withdrawn 2009)

Preformed Joint Fillers, Sealers and Sealing Systems

D3204-93(2003) Standard Specification for Preformed Cellular Plastic Joint Fillers for Relieving Pressure (Withdrawn 2004)

D545-19 Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)

D517-98(2015) Standard Specification for Asphalt Plank

D2628-91(2016) Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements

D6924-03(2017) Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges

D5973-97(2017) Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing

D8139-17 Standard Specification for Semi-Rigid, Closed-Cell Polypropylene Foam, Preformed Expansion Joint Fillers for Concrete Paving and Structural Construction

D1751-18 Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types)

D1752-18 Standard Specification for Preformed Sponge Rubber, Cork and Recycled PVC Expansion Joint Fillers for Concrete Paving and Structural Construction

D3542-08(2019) Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges

D2835-89(2017) Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements

D2828-96(2003) Standard Specification for Nonbituminous Inserts for Contraction Joints in Portland Cement Concrete Airfield Pavements, Sawable Type (Withdrawn 2004)

D994/D994M-11(2022) Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type)

D4070-15(2022) Standard Specification for Adhesive Lubricant for Installation of Preformed Elastomeric Bridge Compression Seals in Concrete Structures

D7174-05(2022) Standard Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction

Quality Control, Inspection and Testing Agencies

D3666-16 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials

D7495-12(2019) Standard Specification for Minimum Requirements for Accreditation Bodies That Accredit Agencies Testing and Inspecting Road and Paving Materials

D4561-11 Standard Practice for Quality Control Systems for Organizations Producing and Applying Bituminous Paving Materials (Withdrawn 2018)

D5506-08 Standard Practice for Organizations Engaged in the Certification of Personnel Testing and Inspecting Bituminous Paving Materials (Withdrawn 2015)

Rheological Tests

D6816-21 Standard Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders (Withdrawn 2021)

D6648-08(2016) Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)

D139-16 Standard Test Method for Float Test for Bituminous Materials

D2493/D2493M-16 Standard Practice for Viscosity-Temperature Chart for Asphalt Binders

D5801-17 Standard Test Method for Toughness and Tenacity of Asphalt Materials

D5/D5M-20 Standard Test Method for Penetration of Bituminous Materials

D2170/D2170M-18 Standard Test Method for Kinematic Viscosity of Asphalts

D7741/D7741M-18 Standard Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Handheld Viscometer

D113-17 Standard Test Method for Ductility of Asphalt Materials

D7175-15 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer

D2171/D2171M-18 Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer

D7405-20 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer

D4957-18 Standard Test Method for Apparent Viscosity of Asphalt Emulsion Residues and Non-Newtonian Asphalts by Vacuum Capillary Viscometer

D6723-12 Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT) (Withdrawn 2021)

D6084/D6084M-21 Standard Test Method for Elastic Recovery of Asphalt Materials by Ductilometer

D7643-22 Standard Practice for Determining the Continuous Grading Temperatures and Continuous Grades for PG Graded Asphalt Binders

Specific Gravity and Density of Asphalt Mixtures

D3549/D3549M-18 Standard Test Method for Thickness or Height of Compacted Asphalt Mixture Specimens

D6857/D6857M-18 Standard Test Method for Maximum Specific Gravity and Density of Asphalt Mixtures Using Automatic Vacuum Sealing Method

D6752/D6752M-18 Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method

PS131-01 Standard Provisional Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method (Withdrawn 2003)

PS132-01 Standard Provisional Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method (Withdrawn 2003)

D6995-21 Standard Test Method for Determining Field VMA Based on the Maximum Specific Gravity of an Asphalt Mixture (Gmm)

D7113/D7113M-10(2016) Standard Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods

D2726/D2726M-21 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Asphalt Mixtures

D7063/D7063M-18 Standard Test Method for Effective Porosity and Effective Air Voids of Compacted Asphalt Mixture Samples

D2950/D2950M-14 Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods

D2041/D2041M-19 Standard Test Method for Theoretical Maximum Specific Gravity and Density of Asphalt Mixtures

D3203/D3203M-17 Standard Test Method for Percent Air Voids in Compacted Asphalt Mixtures

D7227/D7227M-17 Standard Practice for Rapid Drying of Compacted Asphalt Mixture Specimens Using Vacuum Drying Apparatus

D1188/D1188M-22 Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Coated Samples

Specifications and Test for Tar and Tar Products

D1665-20 Standard Test Method for Engler Specific Viscosity of Tar Products

D490-92(2016) Standard Specification for Road Tar

D633-11(2016) Standard Volume Correction Table for Road Tar

D2728-98(2019) Standard Practice for Paving Uses and Application Temperatures for Road Tars

D20-20 Standard Test Method for Distillation of Road Tars

D2993-98 Standard Specification for Acrylonitrile-Butadiene Rubberized Tar (Withdrawn 2003)

Statistical Procedures and Evaluation of Data

D6607-21 Standard Practice for Inclusion of Precision Statement Variation in Specification Limits

D4460-22 Standard Practice for Calculating Precision Limits Where Values Are Calculated from Other Test Methods

Surface Characteristics Related to Tire Pavement Slip Resistance

E1845-15 Standard Practice for Calculating Pavement Macrotexture Mean Profile Depth

E2380/E2380M-15(2019) Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter

E965-15(2019) Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique

E2157-15(2019) Standard Test Method for Measuring Pavement Macrotexture Properties Using the Circular Track Meter

E707-90(2002) Standard Test Method for Skid Resistance Measurements Using the North Carolina State University Variable-Speed Friction Tester (Withdrawn 2006)

E660-90(2021) Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine (Withdrawn 2022)

E303-22 Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester

Sustainable Asphalt Pavement Materials and Construction

D8021-20 Standard Guide for Blast Furnace and Steel Furnace Slag as Produced During the Manufacture of Iron and Steel

D8055-17 Standard Guide for Selecting an Appropriate Electronic Thermometer for Replacing Mercury Thermometers in D04 Road and Paving Standards

D8418-21 Standard Guide for Material and Construction Standards Related to Sustainability Within Committee D04

Terminology

E867-06(2020) Standard Terminology Relating to Vehicle-Pavement Systems

Tire and Slider Characteristics

E501-08(2020) Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests

E524-08(2020) Standard Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests

E1844-08(2020) Standard Specification for a Size 10 × 4–5 Smooth-Tread Friction Test Tire

E1551-16(2020) Standard Specification for a Size 4.00-8 Smooth Tread Friction Test Tire

Traffic Monitoring

E2667-09(2017) Standard Practice for Acquiring Intersection Turning Movement Traffic Data

E1318-09(2017) Standard Specification for Highway Weigh-In-Motion (WIM) Systems with User Requirements and Test Methods

E2532-09(2017) Standard Test Methods for Evaluating Performance of Highway Traffic Monitoring Devices

E2300-09(2017) Standard Specification for Highway Traffic Monitoring Devices

E2665-08(2017) Standard Specification for Archiving ITS-Generated Traffic Monitoring Data

E1957-04(2018) Standard Practice for Installing and Using Pneumatic Tubes With Roadway Traffic Counters and Classifiers

E2259-03a(2018) Standard Guide for Archiving and Retrieving Intelligent Transportation Systems-Generated Data

E2415-05(2018) Standard Practice for Installing Piezoelectric Highway Traffic Sensors

E2561-07a(2018) Standard Practice for the Installation of Inductive Loop Detectors

E2467-05(2018) Standard Practice for Developing Axle Count Adjustment Factors

E2468-05(2018) Standard Practice for Metadata to Support Archived Data Management Systems

E2759-10(2018) Standard Practice for Highway Traffic Monitoring Truth-in-Data

E1572-93 Standard Practice for Classifying Highway Vehicles from Known Axle Count and Spacing (Withdrawn 2002)

E1442-94 Practice for Highway-Traffic Monitoring (Withdrawn 2001)

Vehicle Roadside Communication

PS105-99 Standard Provisional Specification for Dedicated Short-Range Communication (DSRC) Data Link Layer (Withdrawn 2003)

E2158-01 Standard Specification for Dedicated Short Range Communication (DSRC) Physical Layer Using Microwave in the 902 to 928 MHz Band (Withdrawn 2010)

E2213-03(2018) Standard Specification for Telecommunications and Information Exchange Between Roadside and Vehicle Systems — 5-GHz Band Dedicated Short-Range Communications (DSRC), Medium Access Control (MAC), and Physical Layer (PHY) Specifications