ASTM's petroleum standards are instrumental in the evaluation and assessment of the physical, mechanical, rheological, thermal, and chemical properties of crude oils, lubricating grease, automobile and aviation gasoline, hydrocarbons, and other naturally occurring energy resources used for various industrial applications. These fuels are tested for their composition, purity, density, miscibility and compatibility with other fluids and materials, toxicity, and thermal stability among others. These petroleum standards allow petroleum refineries, automotive and aviation companies, and other geological and chemical processing plants to appropriately examine and process these fuel oils ensure their quality towards safe and efficient use.

Petroleum Standards

ASTM's petroleum standards are instrumental in the evaluation and assessment of the physical, mechanical, rheological, thermal, and chemical properties of crude oils, lubricating grease, automobile and aviation gasoline, hydrocarbons, and other naturally occurring energy resources used for various industrial applications. These fuels are tested for their composition, purity, density, miscibility and compatibility with other fluids and materials, toxicity, and thermal stability among others. These petroleum standards allow petroleum refineries, automotive and aviation companies, and other geological and chemical processing plants to appropriately examine and process these fuel oils ensure their quality towards safe and efficient use.

Jump to:

Absorption Spectroscopic Methods

D8274-20a Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil by Portable Rapid Mid-Infrared Analyzer

D7806-20 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Ester) and Triglyceride Content in Diesel Fuel Oil Using Mid-Infrared Spectroscopy (FTIR Transmission Method)

D8383-21 Standard Test Method for Methyl Hydrogen Content of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy

D7861-14(2019) Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Diesel Fuel by Linear Variable Filter (LVF) Array Based Mid-Infrared Spectroscopy

D4053-04(2009) Standard Test Method for Benzene in Motor and Aviation Gasoline by Infrared Spectroscopy (Withdrawn 2013)

D5292-99(2014) Standard Test Method for Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy (Withdrawn 2018)

D2269-10(2020) Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption

D5845-21 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy

D6277-07(2022) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy

D7371-14(2022) Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)

D8473-22 Standard Test Method for Determining the Biobased content of Liquid Hydrocarbon Fuels Using Liquid Scintillation Counting with Spiked Carbon-14

D1840-22 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry

D2008-23 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products

Additives and Electrical Properties

D5006-11(2021) Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels

D7618-13(2021) Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel

D4308-21 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter

D4306-20 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination

D4171-22 Standard Specification for Fuel System Icing Inhibitors

D2624-22 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels

D4054-23 Standard Practice for Evaluation of New Aviation Turbine Fuels and Fuel Additives

D4865-23 Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems

D5001-23 Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)

Analysis of Liquid Fuels and Lubricants

D5800-21 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method

D6304-20 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration

D4530-15(2020) Standard Test Method for Determination of Carbon Residue (Micro Method)

D94-07(2017) Standard Test Methods for Saponification Number of Petroleum Products

D2273-08(2016) Standard Test Method for Trace Sediment in Lubricating Oils (Withdrawn 2023)

D524-15(2019) Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products

D664-18e2 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration

D91-02(2019) Standard Test Method for Precipitation Number of Lubricating Oils

D2982-07(2019) Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils

D189-06(2019) Standard Test Method for Conradson Carbon Residue of Petroleum Products

D893-14(2018) Standard Test Method for Insolubles in Used Lubricating Oils

D7923-19 Standard Test Method for Water in Ethanol and Hydrocarbon Blends by Karl Fischer Titration

D6375-09(2019) Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method

D7579-09(2019) Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol

D7946-19 Standard Test Method for Initial pH (i-pH)-Value of Petroleum Products

D2710-20 Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration

D322-97(2016) Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation (Withdrawn 2022)

D4055-04(2019) Standard Test Method for Pentane Insolubles by Membrane Filtration

D565-99(2019) Standard Test Method for Carbonizable Substances in White Mineral Oil

D3607-08(2016) Standard Test Method for Removing Volatile Contaminants from Used Engine Oils by Stripping (Withdrawn 2022)

D7317-07(2019) Standard Test Method for Coagulated Pentane Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method)

D483-04(2018) Standard Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils

D3339-21 Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration

D8126-21 Standard Test Method for Efficient Basicity Determination by Potentiometric Hydrochloric Acid Titration

D2896-21 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration

D7795-15(2022)e1 Standard Test Method for Acidity in Ethanol and Ethanol Blends by Titration

D974-22 Standard Test Method for Acid and Base Number by Color-Indicator Titration

D8045-17(2023) Standard Test Method for Acid Number of Crude Oils and Petroleum Products by Catalytic Thermometric Titration

D1093-23 Standard Test Method for Acidity of Hydrocarbon Liquids and Their Distillation Residues

D5984-23 Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration

D6082-23 Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils

D4739-23 Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration

D5770-23 Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing

D892-23 Standard Test Method for Foaming Characteristics of Lubricating Oils

D1159-23 Standard Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration

D3242-23 Standard Test Method for Acidity in Aviation Turbine Fuel

Automotive Gear Lubricants & Fluids

D5760-19 Standard Specification for Performance of Manual Transmission Gear Lubricants

D4998-13(2021) Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids

D5579-19e1 Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test

D6121-19ae1 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles

D8165-22 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Used in Hypoid Final-Drive Axles Operated under Low-Speed and High-Torque Conditions

D5704-22a Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles

D5662-23 Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers

D7452-24 Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading

Automotive Greases

D4950-22 Standard Classification and Specification for Automotive Service Greases

Automotive Lubricants

D3525-20 Standard Test Method for Gasoline Fuel Dilution in Used Gasoline Engine Oils by Wide-Bore Capillary Gas Chromatography

D7450-19 Standard Specification for Performance of Rear Axle Gear Lubricants Intended for API Category GL-5 Service

D4858-13 Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines (Withdrawn 2022)

D3524-14(2020) Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography

D4857-12 Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards (Withdrawn 2021)

D4863-13 Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants (Withdrawn 2022)

D4859-13 Standard Specification for Lubricants for Two-Stroke-Cycle Spark-Ignition Gasoline Engines-TC (Withdrawn 2022)

D6922-13(2018) Standard Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils

F118-13 Standard Definitions of Terms Relating to Gaskets (Withdrawn 2022)

D6987/D6987M-13a Standard Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine (Withdrawn 2022)

D6794-20e1 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6 h) Heating Time

D6795-19ae1 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30 min) Heating Time

D7468-22 Standard Test Method for Cummins ISM Test

D4485-22e1 Standard Specification for Performance of Active API Service Category Engine Oils

D8047-23 Standard Test Method for Evaluation of Engine Oil Aeration Resistance in a Caterpillar C13 Direct-Injected Turbocharged Automotive Diesel Engine

D6891-23 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine

D6923-23 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure

D7549-23 Standard Test Method for Evaluation of Heavy-Duty Engine Oils under High Output Conditions—Caterpillar C13 Test Procedure

D8111-23a Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIH, Spark-Ignition Engine

D8279-23a Standard Test Method for Determination of Timing-Chain Wear in a Turbocharged, Direct-Injection, Spark-Ignition, Four-Cylinder Engine

D7484-23a Standard Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine

D8291-23a Standard Test Method for Evaluation of Performance of Automotive Engine Oils in the Mitigation of Low-Speed, Preignition in the Sequence IX Gasoline Turbocharged Direct-Injection, Spark-Ignition Engine

D7038-23 Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants

D8074-23 Standard Test Method for Evaluation of Diesel Engine Oils in DD13 Diesel Engine

D7422-23 Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine

D7156-24 Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine

D8048-24 Standard Test Method for Evaluation of Diesel Engine Oils in T-13 Diesel Engine

D8350-24 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVB Spark-Ignition Engine

Aviation Piston Engine Fuels

D7960-21 Standard Specification for Unleaded Aviation Gasoline Test Fuel Containing Non-hydrocarbon Components

D7719-21a Standard Specification for High Aromatic Content Unleaded Hydrocarbon Aviation Gasoline Test Fuel

D7592-15a Standard Specification for Specification for Grade 94 Unleaded Aviation Gasoline Certification and Test Fuel (Withdrawn 2016)

D6812-04a(2019) Standard Practice for Ground-Based Octane Rating Procedures for Turbocharged/Supercharged Spark Ignition Aircraft Engines

D6424-04a(2019) Standard Practice for Octane Rating Naturally Aspirated Spark Ignition Aircraft Engines

D8434-21 Standard Specification for Unleaded Aviation Gasoline Test Fuel Containing Organo-metallic Additive

D7547-23 Standard Specification for Hydrocarbon Unleaded Aviation Gasoline

D7826-23b Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives

D910-24 Standard Specification for Leaded Aviation Gasolines

D6227-24 Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component

D8147-24 Standard Specification for Special-Purpose Test Fuels for Aviation Compression-Ignition Engines

Burner, Diesel and Non-Aviation Gas Turbine Fuels

PS121-99 Provisional Specification for Biodiesel Fuel (B100) Blend Stock for Distillate Fuels

D2156-09(2018) Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels

D396-21 Standard Specification for Fuel Oils

D7688-18 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) by Visual Observation

D6078-04(2016) Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE) (Withdrawn 2021)

D187-18 Standard Test Method for Burning Quality of Kerosene

D6898-03(2016) Standard Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig (Withdrawn 2021)

D3699-19 Standard Specification for Kerosine

D8181-19 Standard Specification for Microemulsion Blendstock for Preparing Microemulsion Test Fuel Oils

D6985-04a Standard Specification for Middle Distillate Fuel Oil-Military Marine Applications (Withdrawn 2010)

D2157-18 Standard Test Method for Effect of Air Supply on Smoke Density in Flue Gases from Burning Distillate Fuels

D4737-21 Standard Test Method for Calculated Cetane Index by Four Variable Equation

D4418-22 Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines

D6079-22 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)

D976-21e1 Standard Test Method for Calculated Cetane Index of Distillate Fuels

D6751-23a Standard Specification for Biodiesel Fuel Blendstock (B100) for Middle Distillate Fuels

D2880-23 Standard Specification for Gas Turbine Fuel Oils

D7544-23 Standard Specification for Pyrolysis Liquid Biofuel

D7467-23 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)

D975-23a Standard Specification for Diesel Fuel

C4 and C5 Hydrocarbons

D4424-09(2014) Standard Test Method for Butylene Analysis by Gas Chromatography (Withdrawn 2023)

D5274-00(2019) Standard Guide for Analysis of 1,3–Butadiene Product

D7423-23 Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection

D2426-23 Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography

D2593-23 Standard Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography

D4423-23 Standard Test Method for Determination of Carbonyls in C4 Hydrocarbons

D5799-23 Standard Test Method for Determination of Peroxides in Butadiene

D1025-23 Standard Test Method for Nonvolatile Residue of Polymerization-Grade Butadiene

D1157-23 Standard Test Method for Total Inhibitor Content (TBC) of Light Hydrocarbons

D2384-23 Standard Test Methods for Traces of Volatile Chlorides in Butane-Butene Mixtures

Chemical and General Laboratory Tests

D6185-11(2017) Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases

D128-98(2019) Standard Test Methods for Analysis of Lubricating Grease

D1404/D1404M-99(2019) Standard Test Method for Estimation of Deleterious Particles in Lubricating Grease

D4289-21 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids

D4048-22 Standard Test Method for Detection of Copper Corrosion from Lubricating Grease

Chemistry for the Evaluation of In-Service Lubricants

D8304-19 Standard Test Method for Determination of Compounded Forms of Iron in In-service Fluids

D7899-19 Standard Test Method for Measuring the Merit of Dispersancy of In-Service Engine Oils with Blotter Spot Method

D7593-22 Standard Test Method for Determination of Fuel Dilution for In-Service Engine Oils by Gas Chromatography

D8004-23 Standard Test Method for Fuel Dilution of In-Service Lubricants Using Surface Acoustic Wave Sensing

D7546-24 Standard Test Method for Determination of Moisture in New and In-Service Lubricating Oils and Additives by Relative Humidity Sensor

Chromatographic Distribution Methods

D7798-20 Standard Test Method for Boiling Range Distribution of Petroleum Distillates with Final Boiling Points up to 538 °C by Ultra Fast Gas Chromatography (UF GC)

D3710-95(2009) Standard Test Method for Boiling Range Distribution of Gasoline and Gasoline Fractions by Gas Chromatography

D5307-97(2007) Standard Test Method for Determination of Boiling Range Distribution of Crude Petroleum by Gas Chromatography (Withdrawn 2011)

D7096-19 Standard Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography

D7500-15(2019) Standard Test Method for Determination of Boiling Range Distribution of Distillates and Lubricating Base Oils—in Boiling Range from 100 °C to 735 °C by Gas Chromatography

D7807-20 Standard Test Method for Determination of Boiling Range Distribution of Hydrocarbon and Sulfur Components of Petroleum Distillates by Gas Chromatography and Chemiluminescence Detection

D6417-15(2019) Standard Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography

D5480-95(1999)e1 Standard Test Method for Engine Oil Volatility by Gas Chromatography (Withdrawn 2003)

D6352-19e1 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 °C to 700 °C by Gas Chromatography

D5442-17(2021) Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography

D7169-23 Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography

D7213-23 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 °C to 615 °C by Gas Chromatography

D7398-23 Standard Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100 °C to 615 °C by Gas Chromatography

D2887-23 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography

Combustion and Thermal Properties

D7739-11(2020) Standard Practice for Thermal Oxidative Stability Measurement via Quartz Crystal Microbalance

D1740-01 Standard Test Method for Luminometer Numbers of Aviation Turbine Fuels (Withdrawn 2006)

D1322-24 Standard Test Method for Smoke Point of Kerosene and Aviation Turbine Fuel

D3241-24 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels

Combustion Characteristics

D2885-21 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique

D7170-16 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Fixed Range Injection Period, Constant Volume Combustion Chamber Method (Withdrawn 2019)

D909-22 Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline

D8183-22 Standard Test Method for Determination of Indicated Cetane Number (ICN) of Diesel Fuel Oils using a Constant Volume Combustion Chamber—Reference Fuels Calibration Method

D6890-22 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber

D7668-23 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method

D2700-23b Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel

D2699-23b Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel

D613-24 Standard Test Method for Cetane Number of Diesel Fuel Oil

Consistency and Related Rheological Tests

D1403-20b Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment

D7342-20 Standard Test Method for Prolonged Worked Stability of Lubricating Grease in Presence of Water (Water Stability Test)

D1092-20 Standard Test Method for Measuring Apparent Viscosity of Lubricating Greases

D8022-20 Standard Test Method for Roll Stability of Lubricating Grease in Presence of Water (Wet Roll Stability Test)

D217-21a Standard Test Methods for Cone Penetration of Lubricating Grease

D1831-21 Standard Test Method for Roll Stability of Lubricating Grease

Coordinating Subcommittee on Quality Assurance and Statistics

D3244-21a Standard Practice for Utilization of Test Data to Determine Conformance with Specifications

D6617-21 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material

D7372-21 Standard Guide for Analysis and Interpretation of Proficiency Test Program Results

D8428-21 Standard Guide for Establishing Analyst Competence to Perform a Test Method

D7915-22 Standard Practice for Application of Generalized Extreme Studentized Deviate (GESD) Technique to Simultaneously Identify Multiple Outliers in a Data Set

D7778-15(2022)e1 Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method

D8146-22 Standard Guide for Evaluating Test Method Capability and Fitness for Use

D6259-23 Standard Practice for Determination of a Pooled Limit of Quantitation for a Test Method

D6792-23c Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories

D6299-23a Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance

D6300-24 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants

D6708-24 Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material

Correlative Methods

D2501-14(2019) Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils

D2889-95(2019) Standard Test Method for Calculation of True Vapor Pressures of Petroleum Distillate Fuels

D2502-14(2019)e1 Standard Test Method for Estimation of Mean Relative Molecular Mass of Petroleum Oils from Viscosity Measurements

D3343-22 Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels

D7215-22 Standard Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels

D3238-22a Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method

D2890-23 Standard Test Method for Calculation of Liquid Heat Capacity of Petroleum Distillate Fuels

Corrosion and Water/Air Separability

D3603-20 Standard Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method)

D3427-19 Standard Test Method for Air Release Properties of Hydrocarbon Based Oils

D665-23 Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water

Corrosion Testing of Sheet Metal Processing Fluids

D1748-22 Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet

Development and Surveillance of Bench Tests Methods

D4682-18 Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants

D7528-22 Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus

D6557-18e1 Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils

D7563-23 Standard Test Method for Evaluation of the Ability of Engine Oil to Emulsify Water and Simulated Ed85 Fuel

D7216-23 Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers

Elemental Analysis

D7740-20 Standard Practice for Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants

D4927-20 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy

D8056-18 Standard Guide for Elemental Analysis of Crude Oil

D5059-21 Standard Test Methods for Lead and Manganese in Gasoline by X-Ray Fluorescence Spectroscopy

D6728-16(2021) Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry

D7041-16(2021) Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbons and Hydrocarbon-Oxygenate Blends by Gas Chromatography with Flame Photometric Detection

D7111-16(2021) Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

D7751-16(2021) Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis

D4045-19 Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry

D7622-20 Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction

D6445-99(2004)e1 Standard Test Method for Sulfur in Gasoline by Energy-Dispersive X-ray Fluorescence Spectrometry (Withdrawn 2009)

D6667-21 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence

D7318-19e1 Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration

D3230-19 Standard Test Method for Salts in Crude Oil (Electrometric Method)

D4629-17 Standard Test Method for Trace Nitrogen in Liquid Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection

D7623-20 Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method

D2784-11 Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp) (Withdrawn 2016)

D6334-12(2017)e1 Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence (Withdrawn 2022)

D3341-16 Standard Test Method for Lead in Gasoline—Iodine Monochloride Method (Withdrawn 2022)

D482-19 Standard Test Method for Ash from Petroleum Products

D5762-18a Standard Test Method for Nitrogen in Liquid Hydrocarbons, Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence

D7039-15a(2020) Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry

D129-18 Standard Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method) (Withdrawn 2023)

D3120-08(2019) Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry

D3246-15 Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry (Withdrawn 2024)

D4951-14(2019) Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry

D808-16 Standard Test Method for Chlorine in New and Used Petroleum Products (High Pressure Decomposition Device Method) (Withdrawn 2021)

D7171-20 Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy

D7876-13(2018) Standard Practice for Practice for Sample Decomposition Using Microwave Heating (With or Without Prior Ashing) for Atomic Spectroscopic Elemental Determination in Petroleum Products and Lubricants

D1266-18 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)

D5708-15(2020)e1 Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry

D1018-11(2016) Standard Test Method for Hydrogen In Petroleum Fractions (Withdrawn 2021)

D6470-99(2020) Standard Test Method for Salt in Crude Oils (Potentiometric Method)

D5453-19a Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence

D5185-18 Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

D7040-04(2020) Standard Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry

D7578-20 Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants

D5384-14(2019) Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)

D4047-18 Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method

D8322-20 Standard Test Method for Determination of Elements in Residual Fuels and Crude Oils by Microwave Plasma Atomic Emission Spectroscopy (MP-AES)

D6920-13 Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection (Withdrawn 2018)

C1234-11(2019) Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations

D3340-07 Standard Test Method for Lithium and Sodium in Lubricating Greases by Flame Photometer (Withdrawn 2013)

D7260-20 Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants

D8149-20 Standard Practice for Optimization, Calibration, and Validation of Ion Chromatographic Determination of Heteroatoms and Anions in Petroleum Products and Lubricants

D3348-12(2017) Standard Test Method for Rapid Field Test for Trace Lead in Unleaded Gasoline (Colorimetric Method) (Withdrawn 2022)

D8315-20 Standard Test Method for Determination of Wear Metals and Contamination Elements in Used Industrial Oils by Sweeping Flat Electrode Atomic Emission Spectrometry

D1091-11(2016) Standard Test Methods for Phosphorus in Lubricating Oils and Additives (Withdrawn 2021)

D8110-17 Standard Test Method for Elemental Analysis of Distillate Products by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)

D4046-14(2019) Standard Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry (Withdrawn 2019)

D6443-14(2019)e1 Standard Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)

D5622-17 Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis

D7620-10(2020) Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection

D6732-04(2020) Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry

D7343-20 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants

D7212-13(2018) Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter

D1839-14(2019) Standard Test Method for Amyl Nitrate in Diesel Fuels (Withdrawn 2019)

D7455-19 Standard Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis

D5291-21 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants

D4294-21 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry

D2622-21 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry

D8351-22 Standard Test Method for Determination of Trace Elements in Biodiesel and Biodiesel Blends by Microwave Plasma Atomic Emission Spectrometry (MP-AES)

D5056-22 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption

D5184-22 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry

D5600-22 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

D6595-22 Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry

D3605-22 Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy

D7319-22 Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography

D4929-22 Standard Test Method for Determination of Organic Chloride Content in Crude Oil

D3228-22 Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method

D8150-22 Standard Test Method for Determination of Organic Chloride Content in Crude Oil by Distillation Followed by Detection Using Combustion Ion Chromatography

D3237-22 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy

D3831-22 Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy

D7220-22 Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry

D7757-22 Standard Test Method for Silicon in Gasoline and Related Products by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry

D5863-22 Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry

D874-23 Standard Test Method for Sulfated Ash from Lubricating Oils and Additives

D7328-23 Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection

D8127-23 Standard Test Method for Coupled Particulate and Elemental Analysis using X-ray Fluorescence (XRF) for In-Service Lubricants

D1552-23 Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)

D4628-23 Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry

D7691-23 Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

D1318-23 Standard Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method)

D5761-23 Standard Practice for Emulsification/Suspension of Multiphase Fluid Waste Materials

D4952-23 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)

D7482-17(2023) Standard Practice for Sampling, Storage, and Handling of Hydrocarbons for Mercury Analysis

D7303-23 Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry

D8252-23 Standard Test Method for Vanadium and Nickel in Crude and Residual Oil by X-ray Spectrometry

D3701-23 Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry

D4808-23 Standard Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy

D3231-24 Standard Test Method for Phosphorus in Gasoline

D6481-24 Standard Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy

D3227-24 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)

Emerging Turbine Fuels

D7566-23b Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons

Engineering Sciences of High Performance Fluids and Solids (Formally D02.1100)

D8211-21 Standard Test Method for Hot Surface Ignition Temperature of Gases on Flat Surface

D2766-95(2009) Standard Test Method for Specific Heat of Liquids and Solids (Withdrawn 2018)

D3825-09 Standard Test Method for Dynamic Surface Tension by the Fast-Bubble Technique (Withdrawn 2016)

D2715-92(2012) Standard Test Method for Volatilization Rates of Lubricants in Vacuum (Withdrawn 2017)

D3115-95(2014) Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear (Withdrawn 2019)

D2717-95(2009) Standard Test Method for Thermal Conductivity of Liquids (Withdrawn 2018)

D2884-93(2012) Standard Test Method for Yield Stress of Heterogeneous Propellants by Cone Penetration Method (Withdrawn 2017)

D3711-95(2009) Standard Test Method for Deposition Tendencies of Liquids in Thin Films and Vapors (Withdrawn 2016)

D3429-93(2012) Standard Test Method for Solubility of Fixed Gases in Low-Boiling Liquids (Withdrawn 2017)

D2883-95(2009) Standard Test Method for Reaction Threshold Temperature of Liquid and Solid Materials (Withdrawn 2016)

D6793-02(2012) Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus (Withdrawn 2021)

D3523-92(2012) Standard Test Method for Spontaneous Heating Values of Liquids and Solids (Differential Mackey Test) (Withdrawn 2017)

D6668-21 Standard Test Method for Discrimination Between Flammability Ratings of F = 0 and F = 1

D2878-21 Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils

D4056-21 Standard Test Method for Estimation of Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants

D4486-23 Standard Test Method for Kinematic Viscosity of Volatile and Reactive Liquids

D2879-23 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope

Environmental Standards for Lubricants

D8324-21 Standard Guide for Selection of Environmentally Acceptable Lubricants for the U.S. Environmental Protection Agency (EPA) Vessel General Permit

D7373-12 Standard Test Method for Predicting Biodegradability of Lubricants Using a Bio-kinetic Model (Withdrawn 2021)

D6081-22 Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation

D6139-22 Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or Their Components Using the Gledhill Shake Flask

D6384-22 Standard Terminology Relating to Biodegradability and Ecotoxicity of Lubricants

D6731-22 Standard Test Method for Determining the Aerobic, Aquatic Biodegradability of Lubricants or Lubricant Components in a Closed Respirometer

D6006-23 Standard Guide for Assessing Biodegradability of Hydraulic Fluids

D5864-23 Standard Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components

Ethylene

D5234-92(2017) Standard Guide for Analysis of Ethylene Product

D2505-88(2015) Standard Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography

D2504-88(2015) Standard Test Method for Noncondensable Gases in C2 and Lighter Hydrocarbon Products by Gas Chromatography (Withdrawn 2024)

D8098-23 Standard Test Method for Permanent Gases in C2 and C3 Hydrocarbon Products by Gas Chromatography and Pulse Discharge Helium Ionization Detector

D6159-23 Standard Test Method for Determination of Hydrocarbon Impurities in Ethylene by Gas Chromatography

Flow Properties

D6821-20a Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer

D8278-20 Standard Specification for Digital Contact Thermometers for Test Methods Measuring Flow Properties of Fuels and Lubricants

D3829-20a Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil

D4741-21 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer

D6616-21 Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100 °C

D7483-21 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer

D7689-21 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Mini Method)

D2161-20 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity

D7683-21 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Small Test Jar Method)

D7397-21 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Miniaturized Optical Method)

D7962-21 Standard Practice for Determination of Minimum Immersion Depth and Assessment of Temperature Sensor Measurement Drift

D8164-21 Standard Guide for Digital Contact Thermometers for Petroleum Products, Liquid Fuels, and Lubricant Testing

D7110-21 Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures

D2162-21 Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards

D2270-10(2016) Standard Practice for Calculating Viscosity Index from Kinematic Viscosity at 40 °C and 100 °C

D5481-21 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer

D5950-14(2020) Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)

D5853-17a Standard Test Method for Pour Point of Crude Oils

D5771-21 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Optical Detection Stepped Cooling Method)

D5772-21 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Linear Cooling Rate Method)

D4683-20 Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 °C

D2386-19 Standard Test Method for Freezing Point of Aviation Fuels

D6371-17a Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels

D7346-15(2021) Standard Test Method for No Flow Point and Pour Point of Petroleum Products and Liquid Fuels

D7279-20 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer

D6749-02(2018) Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)

D446-12(2017) Standard Specifications and Operating Instructions for Glass Capillary Kinematic Viscometers

D5773-21 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Constant Cooling Rate Method)

D5293-20 Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between –10 °C and –35 °C Using Cold-Cranking Simulator

D4684-20a Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature

D6022-19 Standard Practice for Calculation of Permanent Shear Stability Index

D5901-03 Standard Test Method for Freezing Point of Aviation Fuels (Automated Optical Method) (Withdrawn 2010)

D6896-20a Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature

D3117-03 Standard Test Method for Wax Appearance Point of Distillate Fuels (Withdrawn 2010)

D6278-20a Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus

D5985-02(2020) Standard Test Method for Pour Point of Petroleum Products (Rotational Method)

D5621-20 Standard Test Method for Sonic Shear Stability of Hydraulic Fluids

D6892-03(2020) Standard Test Method for Pour Point of Petroleum Products (Robotic Tilt Method)

D4305-98a(2004)e1 Standard Test Method for Filter Flow of Aviation Fuels at Low Temperatures (Withdrawn 2010)

D341-20e1 Standard Practice for Viscosity-Temperature Equations and Charts for Liquid Petroleum or Hydrocarbon Products

D5275-20 Standard Test Method for Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids

D3245-03 Standard Test Method for Pumpability of Industrial Fuel Oils (Withdrawn 2010)

D5133-20a Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique

D2603-20 Standard Test Method for Sonic Shear Stability of Polymer-Containing Oils

D7154-15(2021)e1 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)

D6895-21 Standard Test Method for Rotational Viscosity of Heavy Duty Diesel Drain Oils at 100 °C

D8420-21 Standard Test Method for Wax Appearance Temperature and Wax Disappearance Temperature of Petroleum Products and Liquid Fuels

D7042-21a Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)

D8210-22 Standard Test Method for Automatic Determination of Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants Using a Rotational Viscometer

D5949-16(2022) Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)

D97-17b(2022) Standard Test Method for Pour Point of Petroleum Products

D2532-22 Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants

D4539-22 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)

D8092-22 Standard Test Method for Field Determination of Kinematic Viscosity Using a Microchannel Viscometer

D7153-22ae1 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)

D7109-22e1 Standard Test Method for Shear Stability of Polymer-Containing Fluids Using a European Diesel Injector Apparatus at 30 Cycles and 90 Cycles

D2500-23 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels

D5972-23 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)

D7152-23 Standard Practice for Calculating Viscosity of a Blend of Petroleum Products

D445-23 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

D7945-23 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer

D2983-23 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer

FTIR Testing Practices and Techniques Related to In-Service Lubricants

D7889-21 Standard Test Method for Field Determination of In-Service Fluid Properties Using IR Spectroscopy

D7844-22a Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry

D7412-22 Standard Test Method for Condition Monitoring of Phosphate Antiwear Additives in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

D7414-22 Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

D7415-22 Standard Test Method for Condition Monitoring of Sulfate By-Products in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

D7624-22 Standard Test Method for Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

D7214-23 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation

D7686-23 Standard Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) Instrument

D7418-23 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring

E2412-23a Standard Practice for Condition Monitoring of In-Service Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

Fuel Cleanliness

D6986-03(2020) Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)

D5000-05 Standard Practice for Evaluating Activity of Clay Elements Using a Side-Stream Sensor (Withdrawn 2014)

D8073-22 Standard Test Method for Determination of Water Separation Characteristics of Aviation Turbine Fuel by Small Scale Water Separation Instrument

D2276-22 Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling

D3240-22a Standard Test Method for Undissolved Water In Aviation Turbine Fuels

D3948-22 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer

D7224-23 Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer

D8290-22 Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Aviation Turbine Fuel using Mid-Infrared Laser Spectroscopy

D7224-23 Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer

D7797-23 Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method

D5452-23 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration

D1094-24 Standard Test Method for Water Reaction of Aviation Fuels

D7959-24 Standard Test Method for Chloride Content Determination of Aviation Turbine Fuels using Chloride Test Strip

D8194-24 Standard Practice for Evaluation of Suitability of 37 mm Filter Monitors and 47 mm Filters Used to Determine Particulate Contaminant in Aviation Turbine Fuels

Functional Tests - Contamination

D4049-20 Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray

D1264-18e1 Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases

D5969-21 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments

D1743-22 Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases

D6138-23a Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)

Functional Tests - Temperature

D3336-20b Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures

D4290-20 Standard Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions

D1478-20 Standard Test Method for Low-Temperature Torque of Ball Bearing Grease

D1263-94(2005)e1 Standard Test Method for Leakage Tendencies of Automotive Wheel Bearing Greases (Withdrawn 2010)

D3527-23 Standard Test Method for Life Performance of Automotive Wheel Bearing Grease

Functional Tests - Tribology

D2509-20ae1 Standard Test Method for Measurement of Load-Carrying Capacity of Lubricating Grease (Timken Method)

D2596-20 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)

D3704-96(2017) Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion

D4170-16 Standard Test Method for Fretting Wear Protection by Lubricating Greases

D2266-23 Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method)

D5707-23 Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

D5706-23 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

D8317-23 Standard Test Method for Measuring Friction and Wear Properties of Greases Under Rolling Motion Using SRV Test Machine

D7594-24 Standard Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian Contact Pressures Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

Gas Chromatography Methods

D7875-20 Standard Test Method for Determination of Butanol and Acetone Content of Butanol for Blending with Gasoline by Gas Chromatography

D7974-21 Standard Test Method for Determination of Farnesane, Saturated Hydrocarbons, and Hexahydrofarnesol Content of Synthesized Iso-Paraffins (SIP) Fuel for Blending with Jet Fuel by Gas Chromatography

D6729-20 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Metre Capillary High Resolution Gas Chromatography

D7920-21 Standard Test Method for Determination of Fuel Methanol (M99) and Methanol Fuel Blends (M10 to M99) by Gas Chromatography

D8369-21 Standard Test Method for Detailed Hydrocarbon Analysis by High Resolution Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy (GC-VUV)

D6733-01(2020) Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography

D8071-21 Standard Test Method for Determination of Hydrocarbon Group Types and Select Hydrocarbon and Oxygenate Compounds in Automotive Spark-Ignition Engine Fuel Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)

D2427-06(2019) Standard Test Method for Determination of C2 through C5 Hydrocarbons in Gasolines by Gas Chromatography (Withdrawn 2023)

D5580-21 Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography

D6839-21a Standard Test Method for Hydrocarbon Types, Oxygenated Compounds, Benzene, and Toluene in Spark Ignition Engine Fuels by Multidimensional Gas Chromatography

D5501-20 Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20 % Ethanol by Gas Chromatography

D6293-98(2003)e1 Standard Test Method for Oxygenates and Paraffin, Olefin, Naphthene, Aromatic (O-PONA) Hydrocarbon Types in Low-Olefin Spark Ignition Engine Fuels by Gas Chromatography (Withdrawn 2009)

D4420-94(1999)e1 Standard Test Method for Determination of Aromatics in Finished Gasoline by Gas Chromatography (Withdrawn 2004)

D6623-01 Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by High Resolution Gas Chromatography

D7576-16 Standard Test Method for Determination of Benzene and Total Aromatics in Denatured Fuel Ethanol by Gas Chromatography (Withdrawn 2022)

D8267-19a Standard Test Method for Determination of Total Aromatic, Monoaromatic and Diaromatic Content of Aviation Turbine Fuels Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)

D7753-12(2020) Standard Test Method for Hydrocarbon Types and Benzene in Light Petroleum Distillates by Gas Chromatography

D4291-21 Standard Test Method for Trace Ethylene Glycol in Used Engine Oil

D2268-21 Standard Test Method for Analysis of High-Purity n-Heptane and Isooctane by Capillary Gas Chromatography

D5441-21 Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography

D5134-21 Standard Test Method for Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography

D6160-21 Standard Test Method for Determination of Polychlorinated Biphenyls (PCBs) in Waste Materials by Gas Chromatography

D7059-21 Standard Test Method for Determination of Methanol in Crude Oils by Multidimensional Gas Chromatography

D7796-21 Standard Test Method for Analysis of Ethyl tert-Butyl Ether (ETBE) by Gas Chromatography

D6584-21 Standard Test Method for Determination of Total Monoglycerides, Total Diglycerides, Total Triglycerides, and Free and Total Glycerin in B-100 Biodiesel Methyl Esters by Gas Chromatography

D4815-22 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography

D5599-22 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection

D8396-22 Standard Test Method for Group Types Quantification of Hydrocarbons in Hydrocarbon Liquids with a Boiling Point between 36 °C and 343 °C by Flow Modulated GCxGC – FID

D6296-22 Standard Test Method for Total Olefins in Spark-ignition Engine Fuels by Multidimensional Gas Chromatography

D8368-22a Standard Test Method for Determination of Totals of Aromatic, Polyaromatic and Fatty Acid Methyl Esters (FAME) Content of Diesel Fuel Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)

D8003-22 Standard Test Method for Determination of Light Hydrocarbons and Cut Point Intervals in Live Crude Oils and Condensates by Gas Chromatography

D8144-22 Standard Test Method for Separation and Determination of Aromatics, Nonaromatics, and FAME Fractions in Middle Distillates by Solid-Phase Extraction and Gas Chromatography

D6730-22 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100-Metre Capillary (with Precolumn) High-Resolution Gas Chromatography

D5443-23 Standard Test Method for Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200 °C by Multi-Dimensional Gas Chromatography

D8519-23 Standard Test Method for Determination of Hydrocarbon Types in Waste Plastic Process Oil Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)

D7900-23 Standard Test Method for Determination of Light Hydrocarbons in Stabilized Crude Oils by Gas Chromatography

D7922-23 Standard Test Method for Determination of Glycol for In-Service Engine Oils by Gas Chromatography

D7754-23 Standard Test Method for Determination of Trace Oxygenates in Automotive Spark-Ignition Engine Fuel by Multidimensional Gas Chromatography

D4626-23 Standard Practice for Calculation of Gas Chromatographic Response Factors

D5986-23 Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C8–C12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy

D3606-24 Standard Test Method for Determination of Benzene and Toluene in Spark Ignition Fuels by Gas Chromatography

D5623-24 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection

Gasoline and Gasoline-Oxygenate Blends

D8076-21b Standard Specification for 100 Research Octane Number Test Fuel for Automotive Spark-Ignition Engines

D5598-20 Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling

D6422-99 Standard Test Method for Water Tolerance (Phase Separation) of Gasoline-Alcohol Blends (Withdrawn 2007)

D6421-20 Standard Test Method for Evaluating Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling by Bench Procedure

D6201-19a Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation

D5500-20a Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation

D8275-22 Standard Specification for Gasoline-like Test Fuel for Compression-Ignition Engines

D4814-23a Standard Specification for Automotive Spark-Ignition Engine Fuel

Gasoline and Oxygenated Fuels

D7862-21 Standard Specification for Butanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel

D8011-19 Standard Specification for Natural Gasoline as a Blendstock in Ethanol Fuel Blends or as a Denaturant for Fuel Ethanol

Guidelines for In-Services Lubricants Analysis

D7720-21 Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination

D7669-20 Standard Guide for Practical Lubricant Condition Data Trend Analysis

D7973-19 Standard Guide for Monitoring Failure Mode Progression in Plain Bearings

D7718-11(2019) Standard Practice for Obtaining In-Service Samples of Lubricating Grease

D8128-22 Standard Guide for Monitoring Failure Mode Progression in Industrial Applications with Rolling Element Ball Type Bearings

D7874-13(2022) Standard Guide for Applying Failure Mode and Effect Analysis (FMEA) to In-Service Lubricant Testing

Heavy Duty Engine Oils

D5967-21 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine

D6894-13 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine (Withdrawn 2022)

D6838-04(2010) Standard Test Method for Cummins M11 High Soot Test (Withdrawn 2019)

D6975-04(2010) Standard Test Method for Cummins M11 EGR Test (Withdrawn 2019)

D5862-09 Standard Test Method for Evaluation of Engine Oils in Two-Stroke Cycle Turbo-Supercharged 6V92TA Diesel Engine (Withdrawn 2009)

D6483-04 Standard Test Method for Evaluation of Diesel Engine Oils in T-9 Diesel Engine (Withdrawn 2009)

D5966-22 Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine

D5968-19ae1 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121 °C

D6594-20e1 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135 °C

D6618-23 Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine

D6681-23 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure

D6750-23 Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)

Hydraulic Fluids

D2619-21 Standard Test Method for Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method)

D7752-18 Standard Practice for Evaluating Compatibility of Mixtures of Hydraulic Fluids

D5534-94(2018) Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids

D8277-20 Standard Test Method for Wet Filterability of Lubricants and Hydraulic Fluids by Mass Flow Technique

D7044-15 Standard Specification for Biodegradable Fire Resistant Hydraulic Fluids (Withdrawn 2024)

D6080-18a Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids

D6046-18 Standard Classification of Hydraulic Fluids for Environmental Impact

D2155-18 Standard Test Method for Determination of Fire Resistance of Aircraft Hydraulic Fluids by Autoignition Temperature

D7043-21 Standard Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump

D6351-22 Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids

D8385-22 Standard Test Method for Dry Filterability of Lubricants and Hydraulic Fluids by Mass Flow Technique

D6973-14(2019)e1 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump

D7721-22 Standard Practice for Determining the Effect of Fluid Selection on Hydraulic System or Component Efficiency

D4174-23 Standard Practice for Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems

D6546-23 Standard Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications

D6158-23 Standard Specification for Mineral Hydraulic Oils

D4898-23 Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis

D6547-23 Standard Test Method for Corrosiveness of Lubricating Fluid to Bimetallic Couple

D8029-23 Standard Specification for Biodegradable, Low Aquatic Toxicity Hydraulic Fluids

D5306-24 Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids

D2070-24 Standard Test Method for Thermal Stability of Hydraulic Oils

Hydrocarbon Analysis

D8302-20 Standard Test Method for Determination of Cycloparaffin Content in Saturated ATJ-SPK Jet Fuel Gas Chromatography

Hydrocarbon Measurement for Custody Transfer (Joint ASTM-API)

D4377-00(2011) Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration (Withdrawn 2020)

D4807-05(2020) Standard Test Method for Sediment in Crude Oil by Membrane Filtration

D5854-19a Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products

D4928-12(2018) Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration

D1744-13 Standard Test Method for Determination of Water in Liquid Petroleum Products by Karl Fischer Reagent (Withdrawn 2016)

D1250-19e1 Standard Guide for the Use of the Joint API and ASTM Adjunct for Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils: API MPMS Chapter 11.1

D4057-22 Standard Practice for Manual Sampling of Petroleum and Petroleum Products

D473-22 Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method

D8009-22 Standard Practice for Manual Piston Cylinder Sampling for Volatile Crude Oils, Condensates, and Liquid Petroleum Products

D1796-22 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)

D4006-22 Standard Test Method for Water in Crude Oil by Distillation

D4007-22 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)

D287-22 Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer/Method)

D1298-12b(2017)e1 Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method

D1657-22e1 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer

D4177-22e1 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products

D7829-23 Standard Guide for Sediment and Water Determination in Crude Oil

D95-23 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation

D2962-23 Standard Practice for Calculating Volume-Temperature Correction For Coal-Tar Pitches

D6822-23 Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method

D5842-23 Standard Practice for Sampling and Handling of Fuels for Volatility Measurement

Hydrocarbons for Chemical and Special Uses

D2712-23 Standard Test Method for Determination of Hydrocarbon Impurities in High Purity Propylene by Gas Chromatography

D4178-23 Standard Practice for Calibrating Moisture Analyzers

In-Service Lubricant Viscosity Testing Practices and Techniques

D8185-23 Standard Guide for In-Service Lubricant Viscosity Measurement

In-Service Lubricants Particle Counting Practices and Techniques

D8072-17 Standard Classification for Reporting Solids and Insoluble Water Contamination of Hydrocarbon-Based Petroleum Products When Analyzed by Imaging Instrumentation

D7647-24 Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction

Integrated Testers, Instrumentation Techniques for In-Service Lubricants

D7417-17 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)

D7416-09(2020) Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Vis

D7917-14(2018) Standard Practice for Inductive Wear Debris Sensors in Gearbox and Drivetrain Applications

D7685-11(2022) Standard Practice for In-Line, Full Flow, Inductive Sensor for Ferromagnetic and Non-ferromagnetic Wear Debris Determination and Diagnostics for Aero-Derivative and Aircraft Gas Turbine Engine Bearings

D7596-23 Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester

D7918-23 Standard Test Method for Measurement of Flow Properties and Evaluation of Wear, Contaminants, and Oxidative Properties of Lubricating Grease by Die Extrusion Method and Preparation

Jet Fuel Specifications

D7223-21 Standard Specification for Aviation Certification Turbine Fuel

D6615-22 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel

D7872-13(2022) Standard Test Method for Determining the Concentration of Pipeline Drag Reducer Additive in Aviation Turbine Fuels

D6824-23 Standard Test Method for Determining Filterability of Aviation Turbine Fuel

D1655-23a Standard Specification for Aviation Turbine Fuels

Liquefied Petroleum Gas

D2421-21e1 Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis

D8094-21 Standard Test Method for Determination of Water Content of Liquefied Petroleum Gases (LPG) Using an Online Electronic Moisture Analyzer

D2598-21 Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis

D1837-17 Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases (Withdrawn 2017)

D2597-10 Standard Test Method for Analysis of Demethanized Hydrocarbon Liquid Mixtures Containing Nitrogen and Carbon Dioxide by Gas Chromatography (Withdrawn 2016)

D2158-21 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases

D7828-12 Standard Test Method for Determination of Residue Composition in Liquefied Petroleum Gas (LPG) Using Automated Thermal Desorption/Gas Chromatography (ATD/GC) (Withdrawn 2021)

D2713-20 Standard Test Method for Dryness of Propane (Valve Freeze Method)

D7756-19 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases by Gas Chromatography with Liquid, On-Column Injection

D1838-21 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases

D7995-19 Standard Test Method for Total Water in Liquid Butane by Liquefied Gas Sampler and Coulometric Karl Fischer Titration

D7994-17 Standard Test Method for Total Fluorine, Chlorine, and Sulfur in Liquid Petroleum Gas (LPG) by Oxidative Pyrohydrolytic Combustion Followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)

D3700-21 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder

D1835-22 Standard Specification for Liquefied Petroleum (LP) Gases

D2420-23 Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)

D1267-23 Standard Test Method for Gauge Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method)

D5305-23 Standard Test Method for Determination of Ethyl Mercaptan in LP-Gas Vapor

D7901-23 Standard Specification for Dimethyl Ether for Fuel Purposes

D1265-23a Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method

Liquid Chromatography

D7419-18 Standard Test Method for Determination of Total Aromatics and Total Saturates in Lube Basestocks by High Performance Liquid Chromatography (HPLC) with Refractive Index Detection

D7524-20 Standard Test Method for Determination of Static Dissipater Additives (SDA) in Aviation Turbine Fuel and Middle Distillate Fuels—High Performance Liquid Chromatograph (HPLC) Method

D7347-15 Standard Test Method for Determination of Olefin Content in Denatured Ethanol by Supercritical Fluid Chromatography (Withdrawn 2024)

D6591-19 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Middle Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection

D2007-19 Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method

D1319-20a Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption

D6550-20 Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography

D6379-21e1 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection

D8305-19 Standard Test Method for The Determination of Total Aromatic Hydrocarbons and Total Polynuclear Aromatic Hydrocarbons in Aviation Turbine Fuels and other Kerosene Range Fuels by Supercritical Fluid Chromatography

D3712-18 Standard Test Method of Analysis of Oil-Soluble Sulfonates by Liquid Chromatography

D7591-12(2017) Standard Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography

D2001-07(2017) Standard Test Method for Depentanization of Gasoline and Naphthas

D5186-22 Standard Test Method for Determination of the Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels By Supercritical Fluid Chromatography

D2549-23 Standard Test Method for Separation of Representative Aromatics and Nonaromatics Fractions of High-Boiling Oils by Elution Chromatography

D8545-23e1 Standard Test Method for Determination of the Metal Deactivator Additive (MDA) (N,N′-disalicylidene-1,2-propanediamine) Content in Aviation Turbine Fuel by High Performance Liquid Chromatography (HPLC)

Lubricating Grease

D4693-07(2021) Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings

D7420-23 Standard Test Method for Determining Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

Manufactured Carbon and Graphite Products

D8356-20 Standard Test Method for Sonic Velocity in Manufactured Carbons and Graphite Materials for use in Obtaining Approximate Elastic Constants: Young’s Modulus, Shear Modulus, and Poisson’s Ratio

D7779-20 Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature

D8186-18 Standard Test Method for Measurement of Impurities in Graphite by Electrothermal Vaporization Inductively Coupled Plasma Optical Emission Spectrometry (ETV-ICP OES)

C695-21 Standard Test Method for Compressive Strength of Carbon and Graphite

C611-21 Standard Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature

D8091-21 Standard Guide for Impregnation of Graphite with Molten Salt

D8377-21a Standard Guide for High Temperature Strength Measurements of Graphite Impregnated with Molten Salt

C886-21 Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials

D7972-14(2020) Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature

C559-16(2020) Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles

D7219-19 Standard Specification for Isotropic and Near-isotropic Nuclear Graphites

C651-20 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature

C709-09 Standard Terminology Relating to Manufactured Carbon and Graphite (Withdrawn 2017)

C816-15(2020)e1 Standard Test Method for Sulfur Content in Graphite by Combustion-Iodometric Titration Method

D8289-20 Standard Test Method for Tensile Strength Estimate by Disc Compression of Manufactured Graphite

C749-15(2020) Standard Test Method for Tensile Stress-Strain of Carbon and Graphite

C560-20 Standard Test Methods for Chemical Analysis of Graphite

D8325-20 Standard Guide for Evaluation of Nuclear Graphite Surface Area and Porosity by Gas Adsorption Measurements

C769-15(2020)e1 Standard Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining an Approximate Value of Young's Modulus

C748-20 Standard Test Method for Rockwell Hardness of Graphite Materials

D8093-19 Standard Guide for Nondestructive Evaluation of Nuclear Grade Graphite

D8255-19 Standard Guide for Work of Fracture Measurements on Small Nuclear Graphite Specimens

C781-20 Standard Practice for Testing Graphite Materials for Gas-Cooled Nuclear Reactor Components

C1025-15(2020) Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite

C1039-85(2020)e1 Standard Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes

C783-85(2020) Standard Practice for Core Sampling of Graphite Electrodes

C625-15(2021) Standard Practice for Reporting Irradiation Results on Graphite

C808-75(2021) Standard Guide for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials

C565-15(2021) Standard Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials

D8075-16(2021) Standard Guide for Categorization of Microstructural and Microtextural Features Observed in Optical Micrographs of Graphite

C662-16(2021) Standard Specification for Impervious Graphite Pipe and Threading

C1179-21 Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air

D7301-21 Standard Specification for Nuclear Graphite Suitable for Components Subjected to Low Neutron Irradiation Dose

D7542-21 Standard Test Method for Air Oxidation of Carbon and Graphite in the Kinetic Regime

D7775-21 Standard Guide for Measurements on Small Graphite Specimens

D7846-21 Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Graphites

C561-23 Standard Test Method for Ash in a Graphite Sample

C562-23 Standard Test Method for Moisture in a Graphite Sample

C714-23 Standard Guide for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method

C747-23 Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance

C838-16(2023) Standard Test Method for Bulk Density of As-Manufactured Carbon and Graphite Shapes

Mass Spectrometry

D2786-91(2016) Standard Test Method for Hydrocarbon Types Analysis of Gas-Oil Saturates Fractions by High Ionizing Voltage Mass Spectrometry (Withdrawn 2023)

D2650-10(2021) Standard Test Method for Chemical Composition of Gases by Mass Spectrometry

D3239-91(2016) Standard Test Method for Aromatic Types Analysis of Gas-Oil Aromatic Fractions by High Ionizing Voltage Mass Spectrometry (Withdrawn 2023)

D8276-19 Standard Test Method for Hydrocarbon Types in Middle Distillates, including Biodiesel Blends by Gas Chromatography/Mass Spectrometry

D7845-20 Standard Test Method for Determination of Chemical Species in Marine Fuel Oil by Multidimensional Gas Chromatography/Mass Spectrometry

D2789-95(2016) Standard Test Method for Hydrocarbon Types in Low Olefinic Gasoline by Mass Spectrometry (Withdrawn 2023)

D5769-22 Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry

D2425-23 Standard Test Method for Hydrocarbon Types in Middle Distillates by Mass Spectrometry

Metal Deformation Fluids and Lubricants

D3342-22 Standard Test Method for Dispersion Stability of New (Unused) Rolling Oil Dispersions in Water

D4042-24 Standard Test Method for Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of Rolling Oils

Metal Removal Fluids and Lubricants

D3705-14(2019) Standard Test Method for Misting Properties of Lubricating Fluids

D3601-88(2007) Standard Test Method for Foam In Aqueous Media (Bottle Test) (Withdrawn 2013)

D8288-19 Standard Test Method for Comparison of Metalworking Fluids Using a Tapping Torque Test Machine

D5619-00(2011) Standard Test Method for Comparing Metal Removal Fluids Using the Tapping Torque Test Machine (Withdrawn 2016)

D1662-19 Standard Test Method for Active Sulfur in Cutting Oils

D3519-88(2007) Standard Test Method for Foam in Aqueous Media (Blender Test) (Withdrawn 2013)

D2881-19 Standard Classification for Metalworking Fluids and Related Materials

D4627-22 Standard Test Method for Iron Chip Corrosion for Water–Miscible Metalworking Fluids

D2711-22 Standard Test Method for Demulsibility Characteristics of Lubricating Oils

D6203-22 Standard Test Method for Thermal Stability of Way Lubricants

D6553-23 Standard Test Method for Coolant Compatibility of Way Lubricants

Miscellaneous Asphalt Tests

D3143-98 Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus (Withdrawn 2007)

D6608-20 Standard Practice for the Identification of Trinidad Lake Asphalt in Asphalt Mixes

D7553-15(2021) Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide

D70/D70M-21 Standard Test Method for Specific Gravity and Density of Semi-Solid Asphalt Binder (Pycnometer Method)

D4124-09(2018) Standard Test Method for Separation of Asphalt into Four Fractions

D3142/D3142M-17 Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method

D5546-09 Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge (Withdrawn 2017)

D3143/D3143M-19 Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus

D8254-19 Standard Test Method for Flash and Fire Points of Asphalt by Cleveland Open Cup Tester

D8189-19 Standard Test Method for Tackiness of Asphalt Binders and Emulsified Asphalt Residue Using the Dynamic Shear Rheometer (DSR)

D3279-19 Standard Test Method for n-Heptane Insolubles

D8078-18e1 Standard Test Method for Ash Content of Asphalt and Emulsified Asphalt Residues

D6703-19 Standard Test Method for Automated Heithaus Titrimetry

D7173-20 Standard Practice for Determining the Separation Tendency of Polymer from Polymer-Modified Asphalt

D2042-22 Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene or Toluene

D3289-17(2022) Standard Test Method for Density of Semi-Solid and Solid Asphalt Materials (Nickel Crucible Method)

D8188-23 Standard Test Method for Determination of Density and Relative Density of Asphalt, Semi-Solid Bituminous Materials, and Soft-Tar Pitch by Use of a Digital Density Meter (U-Tube)

Non-Lubricating Process Fluids

D5372-20 Standard Guide for Evaluation of Hydrocarbon Heat Transfer Fluids

D6743-20 Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids

D6549-06(2021) Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)

D6666-20 Standard Guide for Evaluation of Aqueous Polymer Quenchants

D3520-88(1998) Standard Test Method for Quenching Time of Heat-Treating Fluids (Magnetic Quenchometer Method) (Withdrawn 2008)

D6200-21 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis

D6482-21 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)

D6710-21 Standard Guide for Evaluation of Hydrocarbon-Based Quench Oil

D8046-21 Standard Guide for Pumpability of Heat Transfer Fluids

D7665-22 Standard Guide for Evaluation of Biodegradable Heat Transfer Fluids

D7863-22 Standard Guide for Evaluation of Convective Heat Transfer Coefficient of Liquids

D7646-23 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis

Oxidation of Greases

D7527-10(2018) Standard Test Method for Measurement of Antioxidant Content in Lubricating Greases by Linear Sweep Voltammetry

D8206-18 Standard Test Method for Oxidation Stability of Lubricating Greases—Rapid Small-Scale Oxidation Test (RSSOT)

D5483-21 Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry

D942-23a Standard Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Pressure Vessel Method

Oxidation of Lubricants

D2893-19 Standard Test Methods for Oxidation Characteristics of Extreme-Pressure Lubrication Oils

D4636-17 Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils

D6186-19 Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)

D5846-07(2017) Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus

D4871-11(2022) Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus

D5763-22a Standard Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware

Oxidation of Turbine Oils

D6514-03(2019)e1 Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils

D943-20 Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils

D2272-22 Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel

D6810-22 Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry

D4310-22a Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils

D6971-22 Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry

D7873-22a Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120 °C Without the Inclusion of Water (Dry TOST Method)

D7590-22 Standard Guide for Measurement of Remaining Primary Antioxidant Content In In-Service Industrial Lubricating Oils by Linear Sweep Voltammetry

Oxidation Testing of Engine Oils

D7097-19 Standard Test Method for Determination of Moderately High Temperature Piston Deposits by Thermo-Oxidation Engine Oil Simulation Test—TEOST MHT

D6335-19 Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test

D7098-21 Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B

D4742-23 Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)

D8544-24 Standard Test Method for Determination of Conductive Deposits of Electrical and Mechanical Components from Fluids in Liquid and Vapor States within an Electrically Charged System

Oxygenated Fuels and Components

D5797-21 Standard Specification for Methanol Fuel Blends (M51–M85) for Methanol-Capable Automotive Spark-Ignition Engines

D4806-21a Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel

D5798-21 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines

D7794-21 Standard Practice for Blending Mid-Level Ethanol Fuel Blends for Flexible-Fuel Vehicles with Automotive Spark-Ignition Engines

D8235-21 Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel

D5983-21 Standard Specification for Methyl Tertiary-Butyl Ether (MTBE) for Blending With Gasolines for Use as Automotive Spark-Ignition Engine Fuel

D6423-20a Standard Test Method for Determination of pHe of Denatured Fuel Ethanol and Ethanol Fuel Blends

Passenger Car Engine Oils

D5533-98e1 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIE, Spark-Ignition Engine (Withdrawn 2003)

D5119-02 Standard Test Method for Evaluation of Automotive Engine Oils in the CRC L-38 Spark-Ignition Engine (Withdrawn 2003)

D5302-01a Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation and Wear in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions (Withdrawn 2003)

D6837-13 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIB Spark Ignition Engine (Withdrawn 2022)

D5844-98 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Rusting (Sequence IID) (Withdrawn 2003)

D6202-02 Standard Test Method for Automotive Engine Oils on the Fuel Economy of Passenger Cars and Light-Duty Trucks in the Sequence VIA Spark Ignition Engine (Withdrawn 2009)

D6593-18e1 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions

D6984-18e1 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine

D7320-18e1 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine

D7603-23 Standard Test Method for Determination of Storage Stability and Compatibility in Automotive Gear Oils

D8256-23 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in the Sequence VH Spark-Ignition Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions

D8114-23a Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIE Spark Ignition

D6709-24 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine)

Performance Assessment and Validation of Process Stream Analyzer Systems

D7825-18 Standard Practice for Generating a Process Stream Property Value through Application of a Process Stream Analyzer

D6624-20 Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data

D7235-21a Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices

D7278-21 Standard Guide for Prediction of Analyzer Sample System Lag Times

D8321-22 Standard Practice for Development and Validation of Multivariate Analyses for Use in Predicting Properties of Petroleum Products, Liquid Fuels, and Lubricants based on Spectroscopic Measurements

D7453-22 Standard Practice for Sampling of Petroleum Products for Analysis by Process Stream Analyzers and for Process Stream Analyzer System Validation

D7808-22 Standard Practice for Determining the Site Precision of a Process Stream Analyzer on Process Stream Material

D8470-22 Standard Practice for Development and Implementation of Instrument Performance Tests for Use on Multivariate Online, At-Line and Laboratory Spectroscopic Based Analyzer Systems

D8340-22 Standard Practice for Performance-Based Qualification of Spectroscopic Analyzer Systems

D3764-23 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems

D6122-23 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems

Physical and Chemical Methods

D1480-21 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer

D2503-92(2016) Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure (Withdrawn 2022)

D7777-13(2018)e1 Standard Test Method for Density, Relative Density, or API Gravity of Liquid Petroleum by Portable Digital Density Meter

D1217-20 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer

D1016-05(2015) Standard Test Method for Purity of Hydrocarbons from Freezing Points (Withdrawn 2019)

D1015-05(2015) Standard Test Method for Freezing Points of High-Purity Hydrocarbons (Withdrawn 2019)

D1481-17 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer (Withdrawn 2023)

D1747-09(2019) Standard Test Method for Refractive Index of Viscous Materials

D1218-21 Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids

D4052-22 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter

D5002-22 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer

D7961-22 Standard Practice for Calibrating U-tube Density Cells over Large Ranges of Temperature and Pressure

D611-23 Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents

Physical Tests

D4425-19 Standard Test Method for Oil Separation from Lubricating Grease by Centrifuging (Koppers Method)

D566-20 Standard Test Method for Dropping Point of Lubricating Grease (Withdrawn 2023)

D1742-20 Standard Test Method for Oil Separation from Lubricating Grease During Storage

D2265-22 Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range

D972-22 Standard Test Method for Evaporation Loss of Lubricating Greases and Oils

D2595-22 Standard Test Method for Evaporation Loss of Lubricating Greases Over Wide-Temperature Range

D6184-22 Standard Test Method for Oil Separation from Lubricating Grease (Conical Sieve Method)

Physical/Chemical Properties

D3522-86(2007) Standard Test Method for Applied Coating Wax and Impregnating (Saturating) Wax in Corrugated Board Facing (Withdrawn 2012)

D3708-88(2010) Standard Test Method for Weight of Wax Applied During Curtain Coating Operation (Withdrawn 2015)

D2895-88(1999) Standard Test Method for Gloss Retention of Waxed Paper and Paperboard After Storage at 40°C (104°F) (Withdrawn 2004)

D1832-04(2009) Standard Test Method for Peroxide Number of Petroleum Wax (Withdrawn 2014)

D3706-88(2000) Standard Test Method for Hot Tack of Wax-Polymer Blends by the Flat Spring Test (Withdrawn 2004)

D3234-88(1999) Standard Test Method for Abrasion Resistance of Petroleum Wax Coatings (Withdrawn 2004)

D1834-90(2000) Standard Test Method for 20o Specular Gloss of Waxed Paper (Withdrawn 2004)

Practices and Techniques for Prediction and Determination of Microscopic Wear and Wear-related Properties

D8182-18 Standard Test Method for Alloy Classification of Wear Debris using Laser-Induced Breakdown Spectroscopy (LIBS)

D8184-18e1 Standard Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids Using a Particle Quantifier Instrument

D7684-11(2020) Standard Guide for Microscopic Characterization of Particles from In-Service Lubricants

D7898-14(2020) Standard Practice for Lubrication and Hydraulic Filter Debris Analysis (FDA) for Condition Monitoring of Machinery

D8120-17 Standard Test Method for Ferrous Debris Quantification

D7690-11(2021) Standard Practice for Microscopic Characterization of Particles from In-Service Lubricants by Analytical Ferrography

D7919-14(2021) Standard Guide for Filter Debris Analysis (FDA) Using Manual or Automated Processes

D7670-10(2021) Standard Practice for Processing In-service Fluid Samples for Particulate Contamination Analysis Using Membrane Filters

Preparation of Standard Hydrocarbon Blends

D4051-10(2021) Standard Practice for Preparation of Low-Pressure Gas Blends

D6596-00(2021) Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials

D7717-11(2021) Standard Practice for Preparing Volumetric Blends of Denatured Fuel Ethanol and Gasoline Blendstocks for Laboratory Analysis

D4307-17(2021) Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards

Properties of Fuels, Petroleum Coke and Carbon Material

D5502-21 Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry

D5187-21 Standard Test Method for Determination of Crystallite Size (Lc) of Calcined Petroleum Coke by X-Ray Diffraction

D2638-21 Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer

D6446-01(2006) Standard Test Method for Estimation of Net Heat of Combustion (Specific Energy) of Aviation Fuels (Withdrawn 2012)

D240-19 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter

D4422-19 Standard Test Method for Ash in Analysis of Petroleum Coke

D3461-18 Standard Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method)

D6376-10(2017)e1 Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-ray Fluorescence Spectroscopy

D130-19 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test

D4529-17 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

D4868-17 Standard Test Method for Estimation of Net and Gross Heat of Combustion of Hydrocarbon Burner and Diesel Fuels

D6045-20 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method

D3338/D3338M-20a Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

D1405/D1405M-08(2013) Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels (Withdrawn 2019)

D4809-18 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)

D6756-17 Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer

D2392-15(2021) Standard Test Method for Color of Dyed Aviation Gasolines

D7454-19 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus

D6447-09(2021) Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis

D4892-14(2019)e1 Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)

D71-94(2019) Standard Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)

D61-15(2019) Standard Test Method for Softening Point of Pitches (Cube-in-Water Method)

D2764-20 Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch

D3104-14a(2018) Standard Test Method for Softening Point of Pitches (Mettler Softening Point Method)

D2416-20 Standard Test Method for Coking Value of Tar and Pitch (Modified Conradson)

D4312-20 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)

D2415-20 Standard Test Method for Ash in Coal Tar and Pitch

D6970-03(2019) Standard Practice for Collection of Calcined Petroleum Coke Samples for Analysis

D6258-17 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels

D7058-19 Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer

D2382-88 Test Method for Heat of Combustion of Hydrocarbon Fuels by Bomb Calorimeter (High-Precision Method) (Withdrawn 1994)

D6120-97(2017)e1 Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature

D3703-18 Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels, Gasoline and Diesel Fuels

D2318-20 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch

D4296-18 Standard Practice for Sampling Pitch

D2319/D2319M-20 Standard Test Method for Softening Point of Pitch (Cube-in-Air Method)

D4746-20 Standard Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration

D4893-20 Standard Test Method for Determination of Pitch Volatility

D7280-20 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch by Stainless Steel Crucible Filtration

D7667-21 Standard Test Method for Determination of Corrosiveness to Silver by Automotive Spark-Ignition Engine Fuel—Thin Silver Strip Method

D7671-21 Standard Test Method for Corrosiveness to Silver by Automotive Spark–Ignition Engine Fuel–Silver Strip Method

D5709-22 Standard Test Method for Sieve Analysis of Petroleum Coke

D6374-22 Standard Test Method for Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure

D6791-22 Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke

D6745-22 Standard Test Method for Linear Thermal Expansion of Electrode Carbons

D6559-22 Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks

D6558-22 Standard Test Method for Determination of TGA CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks

D2320-98(2022)e1 Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)

D4715-98(2022)e1 Standard Test Method for Coking Value of Tar and Pitch (Alcan)

D4930-23 Standard Test Method for Dust Control Material on Calcined Petroleum Coke

D6354-23 Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production

D6969-23 Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis

D6353-23 Standard Guide for Sampling Plan and Core Sampling for Prebaked Anodes Used in Aluminum Production

D7095-23 Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip

D156-23 Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)

D8145-23a Standard Practice for Sampling of Green Petroleum Coke

D4072-23 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch

D4616-23 Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch

D5018-23 Standard Test Method for Shear Viscosity of Coal-Tar and Petroleum Pitches

D4292-23 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke

D4931-23 Standard Test Method for Gross Moisture in Green Petroleum Coke

D8097-23 Standard Test Method for Determination of Bulk Density for Specific Size Fractions of Calcined Petroleum Coke Using a Transaxial Pressure Pycnometer

D5004-23 Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement

D5003/D5003M-23 Standard Test Method for Hardgrove Grindability Index (HGI) of Petroleum Coke

D6744-23 Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique

D1500-24 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)

Propylene

D4864-14 Standard Test Method for Determination of Traces of Methanol in Propylene Concentrates by Gas Chromatography (Withdrawn 2016)

D5303-20 Standard Test Method for Trace Carbonyl Sulfide in Propylene by Gas Chromatography

D2163-23e1 Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography

D5273-23 Standard Guide for Analysis of Propylene Concentrates

Recycled Products

D7666-12(2019) Standard Specification for Triglyceride Burner Fuel

D6823-08(2021) Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils

D6074-15(2022) Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils

D6448-16(2022) Standard Specification for Industrial Burner Fuels from Used Lubricating Oils

Solid Lubricants

D2625-20 Standard Test Method for Endurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants (Falex Pin and Vee Method)

D2511-20 Standard Test Method for Thermal Shock Sensitivity of Solid Film Lubricants

D3702-94(2019) Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine

D2981-94(2019) Standard Test Method for Wear Life of Solid Film Lubricants in Oscillating Motion

D2649-20a Standard Test Method for Corrosion Characteristics of Solid Film Lubricants

D1367-96(2001)e1 Standard Test Method for Lubricating Qualities of Graphites (Withdrawn 2006)

D2714-94(2019) Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine

D5620-94(2004) Standard Test Method for Evaluating Thin Film Fluid Lubricants in a Drain and Dry Mode Using a Pin and Vee Block Test Machine (Withdrawn 2010)

D7217-22 Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

D2510-22 Standard Test Method for Adhesion of Solid Film Lubricants

Stability, Cleanliness and Compatibility of Liquid Fuels

D6217-21 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration

D7577-12(2021) Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends

D2068-20 Standard Test Method for Determining Filter Blocking Tendency

D5705-20 Standard Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils

D6469-20 Standard Guide for Microbial Contamination in Fuels and Fuel Systems

D8253-21 Standard Test Method for Determination of the Asphaltene Solvency Properties of Bitumen, Crude Oil, Condensate and/or Related Products for the Purpose of Calculating Stability, Compatibility for Blending, Fouling, and Processibility (Manual Microscopy

D8049-21 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Analyzer

D8386-21 Standard Test Method for Determining Enhanced Filter Blocking Tendency (EFBT)

D7463-21 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water

D7621-16(2021) Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction

D4740-20 Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test

D525-12a(2019) Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method)

D2274-14(2019) Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)

D7978-14(2019) Standard Test Method for Determination of the Viable Aerobic Microbial Content of Fuels and Associated Water—Thixotropic Gel Culture Method

D7451-21 Standard Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark-Ignition Engine Fuels

D7464-20 Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing

D5304-20 Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure

D7996-15 Standard Test Method for Measuring Visible Spectrum of Asphaltenes in Heavy Fuel Oils and Crude Oils by Spectroscopy in a Microfluidic Platform (Withdrawn 2024)

D7525-14(2019)e1 Standard Test Method for Oxidation Stability of Spark Ignition Fuel—Rapid Small Scale Oxidation Test (RSSOT)

D7827-19 Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene from Heavy Fuel Oils as Separability Number by an Optical Device

D7462-11 Standard Test Method for Oxidation Stability of Biodiesel (B100) and Blends of Biodiesel with Middle Distillate Petroleum Fuel (Accelerated Method) (Withdrawn 2016)

D7060-20 Standard Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)

D7112-19 Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)

D6974-20 Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures

D7545-14(2019)e1 Standard Test Method for Oxidation Stability of Middle Distillate Fuels—Rapid Small Scale Oxidation Test (RSSOT)

D6811-02(2007)e1 Standard Test Method for Measurement of Thermal Stability of Aviation Turbine Fuels under Turbulent Flow Conditions (HiReTS Method) (Withdrawn 2013)

D4625-21 Standard Test Method for Middle Distillate Fuel Storage Stability at 43 °C (110 °F)

D7321-21 Standard Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration

D8412-21 Standard Guide for Quantification of Microbial Contamination in Liquid Fuels and Fuel-Associated Water by Quantitative Polymerase Chain Reaction (qPCR)

D7501-22 Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel Fuel Blendstock (B100) by Cold Soak Filtration Test (CSFT)

D8148-22 Standard Test Method for Spectroscopic Determination of Haze in Fuels

D7548-22 Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products

D381-22 Standard Test Method for Gum Content in Fuels by Jet Evaporation

D6468-22 Standard Test Method for High Temperature Stability of Middle Distillate Fuels

D6021-22 Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection

D7619-22 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter

D6560-22 Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products

D7847-22 Standard Guide for Interlaboratory Studies for Microbiological Test Methods

D7261-22 Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer

D4860-22 Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating)

D873-22 Standard Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method)

D2709-22 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge

D4176-22 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)

D8166-22 Standard Test Method for Sizing and Counting Particulates in Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Particle Contamination Monitors

D6426-22 Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils

D6748-22 Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer)

D7963-22 Standard Test Method for Determination of Contamination Level of Fatty Acid Methyl Esters in Middle Distillate and Residual Fuels Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method

D4870-22 Standard Test Method for Determination of Total Sediment in Residual Fuels

D7157-23 Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (n-Heptane Phase Separation; Optical Detection)

D7687-23 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration

D8070-23 Standard Test Method for Screening of Fuels and Fuel Associated Aqueous Specimens for Microbial Contamination by Lateral Flow Immunoassay

D7061-23 Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene-Containing Heavy Fuel Oils as Separability Number by an Optical Scanning Device

Standards Acceleration

D7589-16e1 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine

D8226-21ae1 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIF Spark Ignition Engine

Task Group A: Quality Assurance and Quality Control

D7776-12 Standard Guide for Self-Assessment of Quality System Practices in Petroleum Products and Lubricant Testing Laboratories (Withdrawn 2017)

Terminology

D4175-23a Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants

Tribological Properties of Industrial Fluids and Lubricates

D8316-20a Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils with the Roller-Disk Geometry Using SRV Test Machine

D2670-20 Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method)

D2422-97(2018) Standard Classification of Industrial Fluid Lubricants by Viscosity System

D3233-19 Standard Test Methods for Measurement of Extreme Pressure Properties of Fluid Lubricants (Falex Pin and Vee Block Methods)

D5182-19 Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)

D8227-20 Standard Test Method for Determining the Coefficient of Friction of Synchronizer Lubricated by Mechanical Transmission Fluids (MTF) Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

D2782-20 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method)

D2783-21 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)

D4172-21 Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method)

D5183-21a Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine

D7755-11(2022) Standard Practice for Determining the Wear Volume on Standard Test Pieces Used by High-Frequency, Linear-Oscillation (SRV) Test Machine

D8503-23 Standard Test Method for Determining the Scuffing Temperature Limit of Lubricating Oils Using the SRV Test Machine

D7421-23 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Oils Using High-Frequency, Linear-Oscillation (SRV) Test Machine

D6425-23 Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine

Turbine Oil Monitoring, Problems and Systems

D7843-21 Standard Test Method for Measurement of Lubricant Generated Insoluble Color Bodies in In-Service Turbine Oils using Membrane Patch Colorimetry

D7155-20 Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils

D4241-98(2003) Standard Practice for Design of Gas Turbine Generator Lubricating Oil Systems (Withdrawn 2008)

D4248-98(2003) Standard Practice for Design of Steam Turbine Generator Oil Systems (Withdrawn 2008)

D8323-20 Standard Guide for Management of In-Service Phosphate Ester-based Fluids for Steam Turbine Electro-Hydraulic Control (EHC) Systems

D4304-22 Standard Specification for Mineral and Synthetic Lubricating Oil Used in Steam or Gas Turbines

D4293-22 Standard Specification for Phosphate Ester-Based Fluids for Turbine Lubrication and Steam Turbine Electro-Hydraulic Control (EHC) Applications

D8506-23 Standard Guide for Microbial Contamination and Biodeterioration in Turbine Oils and Turbine Oil Systems

D6439-23 Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems

D6224-23 Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment

D4378-24 Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines

D8112-24 Standard Guide for Obtaining In-Service Samples of Turbine Operation Related Lubricating Fluid

Turbine Oils

D1401-21 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids

Volatility

D7236-16a(2021) Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)

D93-20 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester

D6897-16 Standard Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method)

D323-20a Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)

D92-18 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester

D6450-16a(2021) Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester

D3828-16a(2021) Standard Test Methods for Flash Point by Small Scale Closed Cup Tester

D6377-20 Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCRx (Expansion Method)

D1160-18 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure

D5482-20a Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method—Atmospheric)

D2533-99 Standard Test Method for Vapor-Liquid Ratio of Spark-Ignition Engine Fuels (Withdrawn 2008)

D8236-18 Standard Practice for Preparing an Equilibrium Liquid/Vapor Sample of Live Crude Oil, Condensates, or Liquid Petroleum Products Using a Manual Piston Cylinder for Subsequent Liquid Analysis or Gas Analysis

D7344-17a Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Mini Method)

D4953-20 Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)

D6849-22 Standard Practice for Storage and Use of Liquefied Petroleum Gases (LPG) in Sample Cylinders for LPG Test Methods

D56-22 Standard Test Method for Flash Point by Tag Closed Cup Tester

D6378-22 Standard Test Method for Determination of Vapor Pressure (VPX) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)

D5191-22 Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method)

D7975-22 Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCRx-F(Tm°C) (Manual Expansion Field Method)

D2892-23 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)

D5236-23 Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method)

D5188-23 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber and Piston Based Method)

D7094-23 Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester

D7345-23 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method)

D86-23ae1 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure