ASTM's industrial chemical standards are instrumental in the testing and evaluation of the physical and chemical properties of substances used or produced primarily in industrial applications, particularly in automotives. These chemicals, both organic and inorganic, are manufactured and employed for a variety of consumer goods including engine coolants, rubbers and plastics, and petroleum. These industrial chemical standards allow chemical industrial plants, material processing companies, product manufacturers, and other producers and users of such chemicals in their proper fabrication and treatment processes to ensure quality towards safe production and utilization.
Jump to:
Acids
E224-23 Standard Test Methods for Analysis of Hydrochloric Acid
E1146-23 Standard Specification for Muriatic Acid (Technical Grade Hydrochloric Acid)
E223-23e1 Standard Test Methods for Analysis of Sulfuric Acid
E1584-23 Standard Test Method for Assay of Nitric Acid
Alcohols & Glycols
E2409-20a Standard Test Method for Glycol Impurities in Mono-, Di-, Tri- and Tetraethylene Glycol and in Mono- and Dipropylene Glycol(Gas Chromatographic Method)
E2469-16 Standard Test Method for Chloride in Mono-, Di- and Tri-ethylene Glycol by Ion Chromatography
D8311-20 Standard Test Method for Impurities in Monoethylene Glycol by Gas Chromatography with Normalization
E611-08(2015)e1 Standard Test Methods for Low Concentrations of Diethlyene Glycol in Ethylene Glycol by Gas Chromatography (Withdrawn 2020)
E2470-22 Standard Specification for Polyester Grade Ethylene Glycol
E2679-22 Standard Test Method for Acidity in Mono-, Di-, Tri- and Tetraethylene Glycol by Non-Aqueous Potentiometric Titration
E2664-22 Standard Practice for Methanol Wall Wash of Marine Vessels Handling Polyester Grade Monoethylene Glycol
E2313-22 Standard Test Method for Aldehydes in Mono-, Di-, and Triethylene Glycol (using Spectrophotometry)
E2193-23 Standard Test Method for Ultraviolet Transmittance of Monoethylene Glycol (using Ultraviolet Spectrophotometry)
E1119-23 Standard Specification for Industrial Grade Ethylene Glycol
E202-24 Standard Test Methods for Analysis of Ethylene Glycols and Propylene Glycols
E346-24 Standard Test Method for Analysis of Carbonizables in Methanol
D1152-24 Standard Specification for Methanol (Methyl Alcohol)
Caustics and Peroxides
E291-18 Standard Test Methods for Chemical Analysis of Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide)
E299-17a Standard Test Method for Trace Amounts of Peroxides In Organic Solvents
E298-17a Standard Test Methods for Assay of Organic Peroxides
E359-17 Standard Test Methods for Analysis of Soda Ash (Sodium Carbonate)
E475-16 Standard Test Method for Assay of Di-tert-Butyl Peroxide Using Gas Chromatography
E538-17a Standard Test Methods for Mercury in Caustic Soda (Sodium Hydroxide) and Caustic Potash (Potassium Hydroxide) (Withdrawn 2023)
E1787-16 Standard Test Method for Anions in Caustic Soda and Caustic Potash (Sodium Hydroxide and Potassium Hydroxide) by Ion Chromatography
E222-23 Standard Test Methods for Hydroxyl Groups Using Acetic Anhydride Acetylation
E1899-23 Standard Test Method for Hydroxyl Groups Using Reaction with p-Toluenesulfonyl Isocyanate (TSI) and Potentiometric Titration with Tetrabutylammonium Hydroxide
E1228-23 Standard Test Method for Assay of Peroxy Esters—Catalyzed Iodometric Procedure
Chemical Properties
D7637-10(2021) Standard Test Method for Determination of Glycerin Assay by Titration (Sodium Meta Periodate)
D6129-97(2021) Standard Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy
D7638-10(2021) Standard Test Method for Determination of Fatty Acids and Esters in Glycerin
D1287-11(2020) Standard Test Method for pH of Engine Coolants and Antirusts
D1121-11(2020) Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts
D3634-21 Standard Test Method for Trace Chloride Ion in Engine Coolants
D1119-22 Standard Test Method for Percent Ash Content of Engine Coolants
D5827-22 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
D1123-22a Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
D7304-22a Standard Test Method for Determination of Denatonium Benzoate in Engine Coolant by HPLC
D7515-19(2023) Standard Test Method for Purity of 1,3-Propanediol (Gas Chromatographic Method)
D8528-24 Standard Test Method for Determination of Fluoride and Glycol Degradation Products in Engine Coolants by Ion Chromatography
D7736-19a(2023) Standard Test Method for Determination of Acids and Glycol Esters in Glycols
D6130-24 Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
D7716-11a(2024) Standard Test Method for Determination of Residual Methanol in Glycerin by Gas Chromatography
Chlorine
E534-18 Standard Test Methods for Chemical Analysis of Sodium Chloride
E1229-21 Standard Specification for Calcium Hypochlorite
E1120-21 Standard Specification for Liquid Chlorine
E410-17a Standard Test Method for Moisture and Residue in Liquid Chlorine
E506-17a Standard Test Method for Mercury in Liquid Chlorine
E449-18 Standard Test Methods for Analysis of Calcium Chloride
E649-17a Standard Test Method for Bromine in Chlorine
E1754-17a Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine By Infrared Spectrophotometry
E1786-17a Standard Test Method for Determination of Low Levels of Water in Liquid Chlorine by On-Line Infrared Spectrophotometry
E1746-17a Standard Test Method for Sampling and Analysis of Liquid Chlorine for Gaseous Impurities
E806-21 Standard Test Method for Carbon Tetrachloride and Chloroform in Liquid Chlorine by Direct Injection (Gas Chromatographic Procedure)
E2037-24 Standard Test Method for Bromine Chloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC)
E2036-24 Standard Test Method for Nitrogen Trichloride in Liquid Chlorine by High Performance Liquid Chromatography (HPLC)
Diesel Exhaust Fluid
D7821-12(2018) Standard Test Method for Field Test Determination of Urea Concentration in Diesel Exhaust Fluid (DEF)
Dynamometer and Road Tests
D2758-94(2009) Standard Test Method for Engine Coolants by Engine Dynamometer (Withdrawn 2022)
D2847-22 Standard Practice for Testing Engine Coolants in Car and Light Truck Service
Editorial and Nomenclature
E1445-08(2023) Standard Terminology Relating to Hazard Potential of Chemicals
Explosibility and Ignitability of Dust Clouds
E1491-06(2019) Standard Test Method for Minimum Autoignition Temperature of Dust Clouds
E2931-13(2019) Standard Test Method for Limiting Oxygen (Oxidant) Concentration of Combustible Dust Clouds
E2019-03(2019) Standard Test Method for Minimum Ignition Energy of a Dust Cloud in Air
E1226-19 Standard Test Method for Explosibility of Dust Clouds
E789-95(2001) Standard Test Method for Dust Explosions in a 1.2-Litre Closed Cylindrical Vessel (Withdrawn 2007)
E1515-14(2022) Standard Test Method for Minimum Explosible Concentration of Combustible Dusts
Extended Life Coolants
D7933-22 Standard Test Method for Engine Coolant Stagnation in Flux-Brazed Aluminum Heat Exchangers
D7820-19(2024) Standard Test Method for Engine Coolant Corrosion Protection Under Accelerated Thermal and Oxidizing Conditions Using a Rotating Pressure Vessel
D8567-24 Standard Test Method for Analysis of Engine Coolant for Organic Additives by High Performance Liquid Chromatograph
Flammability and Ignitability of Chemicals
E771-90(1996) Standard Test Method for Spontaneous Heating Tendency of Materials (Withdrawn 2001)
E582-21 Standard Test Method for Minimum Ignition Energy and Quenching Distance in Gaseous Mixtures
E502-21a Standard Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
E1232-07(2019) Standard Test Method for Temperature Limit of Flammability of Chemicals
E2079-19 Standard Test Methods for Limiting Oxygen (Oxidant) Concentration in Gases and Vapors
E918-19 Standard Practice for Determining Limits of Flammability of Chemicals at Elevated Temperature and Pressure
E681-09(2023) Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)
E2021-15(2023) Standard Test Method for Hot-Surface Ignition Temperature of Dust Layers
E659-24 Standard Test Method for Autoignition Temperature of Chemicals
Glassware Performance Tests
D4340-19 Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions
D1176-14(2019) Standard Practice for Sampling and Preparing Aqueous Solutions of Engine Coolants or Antirusts for Testing Purposes
D6208-07(2020) Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement
D4921-20 Standard Test Method for Foaming Tendencies of Engine Coolants at Room Temperature
D7437-23 Standard Test Method for Temperature and Hard Water Stability of Engine Coolants
D1384-24 Standard Test Method for Corrosion Test for Engine Coolants in Glassware
D1881-24 Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware
D7840-24 Standard Test Method for Foaming Tendencies of Non-Aqueous Engine Coolants in Glassware
Heavy Duty Coolants
D5828-97(2023) Standard Test Method for Compatibility of Supplemental Coolant Additives (SCAs) and Engine Coolant Concentrates
D7583-16(2023) Standard Test Method for John Deere Coolant Cavitation Test
Industrial Heat Transfer Fluids
D8039-16(2023) Standard Specification for Heat Transfer Fluids (HTF) for Heating and Air Conditioning (HVAC) Systems
D8040-18(2023) Standard Test Method for Corrosion Test for Heat Transfer Fluids in Glassware
Instrumental Analysis
D1493-97 Standard Test Method for Solidification Point of Industrial Organic Chemicals (Withdrawn 2004)
D7536-20 Standard Test Method for Chlorine in Aromatics by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
D3961-98 Standard Test Method for Trace Quantities of Sulfur in Liquid Aromatic Hydrocarbons by Oxidative Microcoulometry (Withdrawn 2004)
D4534-99 Standard Test Method for Benzene Content of Cyclic Products by Gas Chromatography (Withdrawn 2006)
D6428-99 Test Method for Total Sulfur in Liquid Aromatic Hydrocarbons and Their Derivatives by Oxidative Combustion and Electrochemical Detection (Withdrawn 2006)
D6366-99 Standard Test Method for Total Trace Nitrogen and Its Derivatives in Liquid Aromatic Hydrocarbons by Oxidative Combustion and Electrochemical Detection (Withdrawn 2006)
D6313-99 Test Method for Total Sulfur in Aromatic Compounds by Hydrogenolysis and Sulfur Specific Difference Photometry (Withdrawn 2008)
D6212-99 Standard Test Method for Total Sulfur in Aromatic Compounds by Hydrogenolysis and Rateometric Colorimetry (Withdrawn 2008)
D7375-08 Standard Test Method for Trace Quantities of Water in Aromatic Hydrocarbons and Their Mixtures by Coulometric Karl Fischer Titration (Withdrawn 2017)
D3505-18 Standard Test Method for Density or Relative Density of Pure Liquid Chemicals (Withdrawn 2023)
D850-21 Standard Test Method for Distillation of Industrial Aromatic Hydrocarbons and Related Materials
D4735-19 Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography
D3760-18 Standard Test Method for Analysis of Isopropylbenzene (Cumene) by Gas Chromatography (Withdrawn 2022)
D7457-12 Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry (Withdrawn 2019)
D6069-01(2006) Standard Test Method for Trace Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection (Withdrawn 2015)
D7184-20 Standard Test Method for Ultra Low Nitrogen in Aromatic Hydrocarbons by Oxidative Combustion and Reduced Pressure Chemiluminescence Detection
D7011-15(2019) Standard Test Method for Determination of Trace Thiophene in Refined Benzene by Gas Chromatography and Sulfur Selective Detection
E258-07(2015) Standard Test Method for Total Nitrogen in Organic Materials by Modified Kjeldahl Method (Withdrawn 2019)
D6269-98e1 Test Method for Solidification Point of p-Xylene (Withdrawn 2004)
D5776-21 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Electrometric Titration
D1492-21 Standard Test Method for Bromine Index of Aromatic Hydrocarbons by Coulometric Titration
E1615-22 Standard Test Method for Determination of Trace Quantities of Iron by Visible Spectrophotometry
E394-22 Standard Test Method for Iron in Trace Quantities Using the 1,10-Phenanthroline Method
D6875-23 Standard Test Method for Solidification Point of Industrial Organic Chemicals by Thermistor
D7359-23 Standard Test Method for Total Fluorine, Chlorine and Sulfur in Aromatic Hydrocarbons and Their Mixtures by Oxidative Pyrohydrolytic Combustion followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)
E324-23 Standard Test Method for Relative Initial and Final Melting Points and the Melting Range of Organic Chemicals
D7183-23 Standard Test Method for Determination of Total Sulfur in Aromatic Hydrocarbons and Related Chemicals by Ultraviolet Fluorescence
E200-23 Standard Practice for Preparation, Standardization, and Storage of Standard and Reagent Solutions for Chemical Analysis
D5808-23 Standard Test Method for Determining Chloride in Aromatic Hydrocarbons and Related Chemicals by Microcoulometry
E2680-23 Standard Test Method for Appearance of Clear, Transparent Liquids (Visual Inspection Procedure)
E70-24 Standard Test Method for pH of Aqueous Solutions With the Glass Electrode
E203-24 Standard Test Method for Water Using Volumetric Karl Fischer Titration
E411-24 Standard Test Method for Trace Quantities of Carbonyl Compounds with 2,4-Dinitrophenylhydrazine
E1064-24 Standard Test Method for Water in Organic Liquids by Coulometric Karl Fischer Titration
D5386-24 Standard Test Method for Color of Liquids Using Tristimulus Colorimetry
D5194-24a Standard Test Method for Trace Chloride in Liquid Aromatic Hydrocarbons
D891-24 Standard Test Methods for Specific Gravity, Apparent, of Liquid Industrial Chemicals
D8534-24 Standard Test Method for Determination of Trace Peroxides in Liquid, Liquefied, and Reagents Soluble Hydrocarbon Streams using Flow Injection System with Ultraviolet/Visible Detector
Non-Aqueous Coolants
D7934/D7934M-14 Standard Test Method for Corrosion of Cast Aluminum Alloys in Non-Aqueous Engine Coolants Under Heat-Rejecting Conditions (Withdrawn 2023)
D7896-19 Standard Test Method for Thermal Conductivity, Thermal Diffusivity, and Volumetric Heat Capacity of Engine Coolants and Related Fluids by Transient Hot Wire Liquid Thermal Conductivity Method
D8116-18 Standard Specification for Fully-Formulated Non-Aqueous Engine Coolant for Heavy-Duty Engines (Withdrawn 2019)
D7935-20 Standard Test Method for Corrosion Test for Non-Aqueous Engine Coolants in Glassware
D8034/D8034M-24 Standard Test Method for Simulated Service Corrosion Testing of Non-Aqueous Engine Coolants
D8085-24 Standard Specification for Non-Aqueous Engine Coolant for Automobile and Light-Duty Service
Physical Properties
D1882-17(2021) Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles
D5931-20 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
D1120-22 Standard Test Method for Boiling Point of Engine Coolants
D1177-22 Standard Test Method for Freezing Point of Aqueous Engine Coolants
D1122-22 Standard Test Method for Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
D3321-19(2023) Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants
D6660-01(2023) Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method
Reference Test Materials
D3585-24 Standard Specification for ASTM Reference Fluid for Coolant Tests
Simulated Service Tests
D3147-21 Standard Test Method for Testing Stop-Leak Additives for Engine Coolants
D2809-21 Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
D2570-24 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
Specifications
D5345-98 Standard Specification for Prediluted Aqueous Ethylene Glycol Base Low-Silicate Engine Coolant (50 Volume % Minimum) for Heavy-Duty Engines Requiring an Initial Charge of Supplemental Coolant Additive (SCA) (Withdrawn 2000)
D4656-98 Standard Specification for Prediluted Aqueous Ethylene Glycol Base Engine Coolant (50 Volume % Minimum) for Automobiles and Light-Duty Service (Withdrawn 2000)
D6211-98a Standard Specification for Fully-Formulated Propylene-Glycol-Base Engine Coolant for Heavy-Duty Engines (Withdrawn 2003)
D5752-10(2017) Standard Specification for Supplemental Coolant Additives (SCAs) for Use in Precharging Coolants for Heavy-Duty Engines
D7714-11(2021) Standard Specification for Glycerin Base Engine Coolant for Automobile and Light-Duty Service
D7640-16(2021) Standard Specification for Engine Coolant Grade Glycerin
D7715-12(2021) Standard Specification for Fully-Formulated Glycerin Base Engine Coolant for Heavy-Duty Engines
D6210-17 Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines
D7517-19 Standard Specification for Fully-Formulated 1,3 Propanediol (PDO) Base Engine Coolant for Heavy-Duty Engines
D7518-20 Standard Specification for 1,3 Propanediol (PDO) Base Engine Coolant for Automobile and Light-Duty Service
D5216-98 Standard Specification for Propylene Glycol Base Engine Coolant for Automobile and Light-Duty Service (Withdrawn 2000)
D6257-98 Standard Specification for Prediluted Aqueous Propylene Glycol Base Engine Coolant (50 Volume % Minimum) for Automobile and Light-Duty Service (Withdrawn 2000)
D5223-03 Standard Specification for Engine Coolant Grade Propylene Glycol (Withdrawn 2003)
D3306-21 Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service
D7388-23 Standard Specification for Engine Coolant Grade 1,3-Propanediol (PDO)
E1177-23 Standard Specification for Engine Coolant Grade Glycol
D4985-10(2023) Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)
D7713-18(2023) Standard Specification for Aqueous Engine Coolant Grade Glycol (53 % by Volume Nominal)
D6107-97(2023) Standard Specification for Stop-Leak Additive for Engine Coolants Used in Light Duty Service
Terminology
D4725-15(2023) Standard Terminology for Engine Coolants and Related Fluids
Thermal Stability and Condensed Phases
E2046-19 Standard Test Method for Reaction Induction Time by Thermal Analysis
E487-20 Standard Test Methods for Constant-Temperature Stability of Chemical Materials
E2012-06(2020) Standard Guide for the Preparation of a Binary Chemical Compatibility Chart
E476-87(2001) Standard Test Method for Thermal Instability of Confined Condensed Phase Systems (Confinement Test) (Withdrawn 2008)
E1981-22 Standard Guide for Assessing Thermal Stability of Materials by Methods of Accelerating Rate Calorimetry
E1231-24 Standard Practice for Calculation of Hazard Potential Figures of Merit for Thermally Unstable Materials
E680-79(2024) Standard Test Method for Drop Weight Impact Sensitivity of Solid-Phase Hazardous Materials
E537-24 Standard Test Method for Thermal Stability of Chemicals by Differential Scanning Calorimetry
Thermoplastic Materials
D8366-21a Standard Specification for Extruded and Compression Molded Shapes Made from Unfilled Poly(Vinylidene Fluoride) PVDF
D1693-21 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics
D729-95 Standard Specification for Vinylidene Chloride Molding Compounds (Withdrawn 2000)
D1249-92(1999) Standard Specification for Octyl Ortho-Phthalate Ester Plasticizers (Withdrawn 2007)
D1928-96 Standard Practice for Preparation of Compression-Molded Polyethylene Test Sheets and Test Specimens (Withdrawn 2001)
D2951-00 Standard Test Method for Resistance of Types III and IV Polyethylene Plastics to Thermal Stress-Cracking (Withdrawn 2006)
D2873-94(1999)e1 Standard Test Method for Interior Porosity of Poly(Vinyl Chloride) (PVC) Resins by Mercury Intrusion Porosimetry (Withdrawn 2003)
D706-20 Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds (CA)
D4181-00 Standard Classification for Acetal (POM) Molding and Extrusion Materials (Withdrawn 2005)
D4507-93a Specification for Thermoplastic Polyester (TPES) Materials (Withdrawn 1999)
D5990-20a Standard Classification System and Basis for Polyketone Injection Molding and Extrusion Materials (PK)
D4550-98 Standard Specification for Thermoplastic Elastomer-Ether-Ester (TEEE) (Withdrawn 2004)
D4474-00 Standard Classification System for Styrenic Thermoplastic Elastomer Injection Molding and Extrusion Materials (TES) (Withdrawn 2008)
D5318-97 Standard Test Method for Hydrolyzable Chloride in Peroxy Esters and Peroxy Dicarbonates (Withdrawn 2004)
D5046-98 Standard Specification for Fully Crosslinked Elastomeric Alloys (FCEAs) (Withdrawn 2000)
D3295-20 Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing
D5593-99e1 Standard Classification for Thermoplastic Elastomers-Olefinic (TEO) (Withdrawn 2005)
D5021-00 Standard Specification for Thermoplastic Elastomer-Chlorinated Ethylene Alloy (TECEA) (Withdrawn 2007)
D5676-99 Standard Specification for Recycled Polystyrene Molding and Extrusion Materials (Withdrawn 2004)
D5476-99 Standard Classification System for Thermoplastic Polyurethane Materials (TPU) (Withdrawn 2005)
D6260-98 Standard Test Method for Gravimetric Determination of Carbon Black in Nylon Materials (PA) (Withdrawn 2004)
D5393-97 Test Method for Determination of Fogging Characteristics of Vehicle Interior Trim Materials (Withdrawn 1998)
D6867-19 Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing
D5740-18 Standard Guide for Writing Material Standards in the Classification D4000 Format
D2383-19 Standard Test Method for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds Under Humid Conditions
D1045-19 Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics
D3367-21 Standard Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force
D6394-21a Standard Classification System for and Basis for Specification for Sulfone Plastics (SP)
D1755-21 Standard Specification for Poly(Vinyl Chloride) Resins
D2176-16(2021) Standard Test Method for Folding Endurance of Paper and Plastics Film by the M.I.T. Tester
D2116-16(2021) Standard Specification for FEP Resin Molding and Extrusion Materials
D4549-15(2021) Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
D4802-16 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet
D788-16 Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds
D6098-16 Standard Classification System and Basis for Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)
D5998-16 Standard Specification for Molded Polyethylene Shipping and Storage Drums
D6712-17 Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes
D1248-16 Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable
D6865-17 Standard Classification System and Basis for Specifications for Acrylonitrile–Styrene–Acrylate (ASA) and Acrylonitrile–EPDM–Styrene (AES) Plastics and Alloys Molding and Extrusion Materials
D5927-17 Standard Classification System for and Basis for Specifications for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods
D7474-17 Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents
D4203-17 Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials
D6338-17 Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPV) Based on ASTM Standard Test Methods
D3307-21 Standard Specification for Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials
D3965-21 Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
D3222-21 Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials
E1788-16 Standard Test Method for Acidity in Acrylonitrile (Withdrawn 2022)
D6100-17 Standard Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes (POM)
D787-18 Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds
D7292-18 Standard Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI)
D5989-18 Standard Specification for Extruded and Monomer Cast Shapes Made from Nylon (PA)
D8156-18 Standard Classification System for and Basis of Specifications for Thermoplastic Elastomer Copolyester Molding and Extrusion Materials (TPC)
D2222-19 Standard Test Method for Methanol Extract of Vinyl Chloride Resins
D3596-19 Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins
D6339-11(2019) Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS)
D3595-14(2019)e1 Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film
D3012-19 Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven
D6358-19e1 Standard Classification System and Basis for Specification for Poly (Phenylene Sulfide) (PPS) Injection Molding, Extrusion and Blow Molding Materials Using ISO Methods
D789-19 Standard Test Method for Determination of Relative Viscosity of Concentrated Polyamide (PA) Solutions
D4066-13(2019) Standard Classification System for Nylon Injection and Extrusion Materials (PA)
D6456-10(2018) Standard Specification for Finished Parts Made from Polyimide Resin
D2287-19 Standard Classification System and Basis for Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds
D4020-18 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials
D6778-20 Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM)
D1784-20 Standard Classification System and Basis for Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
D1710-15(2021) Standard Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes
D3369-01 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Cast Film (Withdrawn 2006)
D2151-95(2000) Standard Practice for Staining of Poly(Vinyl Chloride) Compositions by Rubber Compounding Ingredients (Withdrawn 2003)
D2288-97(2001) Standard Test Method for Weight Loss of Plasticizers on Heating (Withdrawn 2010)
D2581-09 Standard Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials (Withdrawn 2018)
D3915-06 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Pressure Applications (Withdrawn 2015)
D1996-97(2003) Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Low Density Polyethylene Using Liquid Chromatography (LC) (Withdrawn 2009)
D6457-08(2013) Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE) (Withdrawn 2018)
D5203-07 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer (HDPE) Sources (Withdrawn 2016)
E1863-18 Standard Test Method for Analysis of Acrylonitrile by Gas Chromatography
D4441-20 Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene
D5436-15(2020) Standard Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes
D7293-19 Standard Specification for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI)
D4976-12a(2020) Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
D2538-18 Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer
D2396-20 Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
D3892-15(2020) Standard Practice for Packaging/Packing of Plastics
D3935-21 Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material
D3368-17(2022) Standard Specification for FEP Sheet and Film
D6436-14(2022) Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers
D4591-22 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
D1430-22 Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics
D3159-22 Standard Specification for Modified ETFE Fluoropolymer Molding and Extrusion Materials
D4969-17(2022) Standard Specification for Polytetrafluoroethylene–(PTFE) Coated Glass Fabric
D5491-08(2022) Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials
D3308-12(2022) Standard Specification for PTFE Resin Skived Tape
D6585-17(2022) Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape
D7193-17(2022) Standard Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape
D3291-22 Standard Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression
D4216-22 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds
D5260-22 Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
D6261-14(2022) Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)
D3294-22 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Molded Sheet and Molded Basic Shapes
D4349-22 Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials
D2115-22 Standard Practice for Oven Heat Stability of Poly(Vinyl Chloride) Compositions
D4634-16(2022) Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)
D1562-22 Standard Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds (CAP)
D4396-22 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications
D8033-22 Standard Classification System for Poly(Ether Ether Ketone) (PEEK) Molding and Extrusion Materials
D5336-22 Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Materials
D8349-21 Standard Classification System for and Basis of Specifications for Thermoplastic Joining Interface Materials for Creation of Joints Between Different Materials for the Production of End Items or Parts that are Intended to be Disassembled and/or Reassemb
D6314-98 Standard Specification for Fluorocarbon Perfluoromethoxy (MFA) Resin Molding and Extrusion Materials (Withdrawn 2002)
D5204-22 Standard Classification System and Basis for Specification for Polyamide-Imide (PAI) Molding and Extrusion Materials
D4673-23 Standard Classification System for and Basis for Specification for Acrylonitrile–Butadiene–Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials
D4067-23 Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods
D6263-23 Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)
D707-15(2023) Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds (CAB)
D2839-16(2023) Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene
D5575-18(2023) Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers
D5138-23 Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP)
D6779-23 Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)
D4000-23 Standard Classification System for Specifying Plastic Materials
D7211-23 Standard Specification for Parts Machined from Polychlorotrifluoroethylene (PCTFE) and Intended for General Use
D3275-18(2023) Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials
D4895-18(2023) Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion
D3030-23 Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins
D6262-23 Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK)
D6835-23 Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)
D1243-22e1 Standard Test Method for Dilute Solution Viscosity of Vinyl Chloride Polymers
D5675-13(2023) Standard Classification for Low Molecular Weight PTFE and FEP Micronized Powders
D6040-18(2023) Standard Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape
D8501-23a Standard Classification System for and Basis for Specification for Unfilled Poly(Ether Ketone Ketone) (PEKK) Materials for Molding, Extrusion, Composites, Powder Coating and Additive Manufacturing
D1203-23 Standard Test Methods for Volatile Loss from Plastics Using Activated Carbon Methods
D5857-17(2024) Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology
D5492-17(2024) Standard Test Method for Determination of Xylene Solubles in Propylene Plastics
D2647-18(2024) Standard Specification for Crosslinkable Ethylene Plastics
D2765-16(2024) Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics
D7436-17(2024) Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology
D4101-24 Standard Classification System and Basis for Specification for Polypropylene Injection and Extrusion Materials
D5205-24 Standard Classification System and Basis for Specification for Polyetherimide (PEI) Molding and Extrusion Materials
D3296-24 Standard Specification for FEP Resin Tube
D6150-24 Standard Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility
D7194-19(2024) Standard Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE)
D7471-19(2024) Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials
D7472-19(2024) Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials
D1823-24 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer
D1824-24 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates
D4745-19(2024) Standard Classification System and Basis for Specification for Filled Polytetrafluoroethlyene (PTFE) Molding and Extrusion Materials Using ASTM Methods
D4894-19(2024) Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials
D6713-24 Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF)
D3350-24 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials