ASTM's building standards are instrumental in specifying, evaluating, and testing the dimensional, mechanical, rheological, and other performance requirements of the materials used in the manufacture of main and auxiliary building parts and components. These materials include construction sealants, structural members, insulation systems, and other facilities used in conjunction with the erection of the foundation, walls, roofs, ceilings, doors, and windows of both commercial and domestic building structures. These building standards are helpful in guiding manufacturers, construction companies, architectural firms, and other users of such parts and components in their proper fabrication and installation procedures, as well as the possible hazards involved during these processes.

Building Standards

ASTM's building standards are instrumental in specifying, evaluating, and testing the dimensional, mechanical, rheological, and other performance requirements of the materials used in the manufacture of main and auxiliary building parts and components. These materials include construction sealants, structural members, insulation systems, and other facilities used in conjunction with the erection of the foundation, walls, roofs, ceilings, doors, and windows of both commercial and domestic building structures. These building standards are helpful in guiding manufacturers, construction companies, architectural firms, and other users of such parts and components in their proper fabrication and installation procedures, as well as the possible hazards involved during these processes.

Jump to:

Adhesion

C910-16(2021) Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants

C1523-17 Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants

C907-17(2018) Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method

C1736-11 Standard Practice for Non-Destructive Evaluation of Adhesion of Installed Weatherproofing Sealant Joints Using a Rolling Device (Withdrawn 2020)

C1247-20 Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids

C1521-19(2020) Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints

C906-00 Standard Test Method for T-Peel Strength of Hot Applied Sealants (Withdrawn 2006)

C736-12(2022) Standard Test Method for Extension-Recovery and Adhesion of Latex Sealants

C719-22 Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)

C794-18(2022) Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants

C1635-22 Standard Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension

C1265-22 Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications

C1382-16(2023) Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints

C1216/C1216M-23 Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants

C1367-19(2023) Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures

C908-15(2024) Standard Test Method for Yield Strength of Preformed Tape Sealants

C961-15(2024) Standard Test Method for Lap Shear Strength of Sealants

C1135-19(2024) Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants

Aerosol Foam Sealants

C1642-20 Standard Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials

C1536-19 Standard Test Method for Measuring the Yield for Aerosol Foam Sealants

C1806-21 Standard Test Method for Measuring the Flow Rate of Aerosol Foam Sealants

C1852-20 Standard Guide for Product Selection/Delivery Systems for Aerosol Foam Sealants and Adhesives

C1643-14(2020) Standard Test Method to Measuring the Post Dispensing Volumetric Expansion of Aerosol Foam Sealants

C1620-16(2023) Standard Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants

C1737-24 Standard Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing

Air Leakage and Ventilation Performance

E2121-21 Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings

E241-20 Standard Guide for Limiting Water-Induced Damage to Buildings

E2178-21a Standard Test Method for Determining Air Leakage Rate and Calculation of Air Permeance of Building Materials

E1998-11(2018) Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances

E3087-18 Standard Test Method for Measuring Capture Efficiency of Domestic Range Hoods

E779-19 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization

E2029-11(2019) Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution

E1465-08a Standard Practice for Radon Control Options for the Design and Construction of New Low-Rise Residential Buildings (Withdrawn 2017)

E2342/E2342M-10(2020) Standard Test Method for Durability Testing of Duct Sealants

E1186-22 Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems

E1827-22 Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door

E3054/E3054M-23 Standard Guide for Characterization and Use of Hygrothermal Models for Moisture Control Design in Building Envelopes

E1258-23 Standard Test Method for Airflow Calibration of Fan Pressurization Devices

E1677-23 Standard Specification for Air Barrier (AB) Material or Assemblies for Low-Rise Framed Building Walls

E1554/E1554M-13(2023) Standard Test Methods for Determining Air Leakage of Air Distribution Systems by Fan Pressurization

E2357-24 Standard Test Method for Determining Air Leakage Rate of Air Barrier Assemblies

E3127-24 Standard Guide for Specifying Water Vapor Transmission Material Properties of Water-Resistive Barriers and Air Barriers

E3158-24 Standard Test Method for Measuring the Air Leakage Rate of a Large or Multizone Building

E741-24 Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution

Application of Acoustical Materials and Systems

E497-99 Standard Practice for Installing Sound-Isolating Lightweight Partitions (Withdrawn 2008)

C636/C636M-19 Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels

E557-12(2020) Standard Guide for Architectural Design and Installation Practices for Sound Isolation between Spaces Separated by Operable Partitions

E1433-04 Standard Guide for Selection of Standards on Environmental Acoustics (Withdrawn 2010)

E3090/E3090M-22 Standard Test Methods for Strength Properties of Metal Ceiling Suspension Systems

C367/C367M-22 Standard Test Methods for Strength Properties of Prefabricated Architectural Acoustical Tile or Lay-In Ceiling Panels

C635/C635M-22 Standard Specification for Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings

E1042-22 Standard Classification for Acoustically Absorptive Materials Applied by Trowel or Spray

E1264-23 Standard Classification for Acoustical Ceiling Products

E580/E580M-24 Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions

Building Economics

E2083-05(2016) Standard Classification for Building Construction Field Requirements, and Office Overhead & Profit

E3130-21 Standard Guide for Developing Cost-Effective Community Resilience Strategies

E2691-20 Standard Practice for Job Productivity Measurement

E964-15(2020)e1 Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems

E1074-15(2020)e1 Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems

E1057-15(2020)e1 Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems

E1185-15(2020)e1 Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems

E1121-15(2020)e1 Standard Practice for Measuring Payback for Investments in Buildings and Building Systems

E1369-15(2020)e1 Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems

E2204-15(2020)e1 Standard Guide for Summarizing the Economic Impacts of Building-Related Projects

E2506-15(2020)e1 Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities

E2620-15(2020) Standard Classification for Program and Project Estimate Summaries

E3035-15(2020) Standard Classification for Facility Asset Component Tracking System (FACTS)

E1699-14(2020) Standard Practice for Performing Value Engineering (VE)/Value Analysis (VA) of Projects, Products and Processes

E2514-15(2020) Standard Practice for Presentation Format of Elemental Cost Estimates, Summaries, and Analyses

E2013-20 Standard Practice for Developing Functions, Constructing FAST Diagrams, and Performing Function Analysis During Value Engineering (VE)/Value Analysis (VA) Study

E833-14(2021) Standard Terminology of Building Economics

E1765-16(2023) Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Projects, Products, and Processes

E1804-16(2023) Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project

E1946-18(2023) Standard Practice for Measuring Cost Risk of Buildings and Building Systems and Other Constructed Projects

E2166-16(2023) Standard Practice for Organizing and Managing Building Data

E2168-10(2023) Standard Classification for Allowance, Contingency, and Reserve Sums in Building Construction Estimating

E3008/E3008M-16(2023) Standard Classification for Transportation Surface Elements—UNIFORMAT II

E3372-23 Standard Guide for Schedule Performance Index, Schedule Beta (βs)

E917-17(2023) Standard Practice for Measuring Life-Cycle Costs of Buildings and Building Systems

E2103/E2103M-19(2024) Standard Classification for Bridge Elements—UNIFORMAT II

E2516-11(2024) Standard Classification for Cost Estimate Classification System

E2637-17(2024) Standard Guide for Utilizing the Environmental Cost Element Structure Presented by Classification

E1557-09(2024) Standard Classification for Building Elements and Related Sitework—UNIFORMAT II

E2150-17(2024) Standard Classification for Life-Cycle Environmental Work Elements—Environmental Cost Element Structure

Building Preservation and Rehabilitation Technology

E3069-19a Standard Guide for Evaluation and Rehabilitation of Mass Masonry Walls for Changes to Thermal and Moisture Properties of the Wall

E2260-21a Standard Guide for Repointing (Tuckpointing) Historic Masonry

E2167-01(2008) Standard Guide for Selection and Use of Stone Consolidants (Withdrawn 2017)

E1857-97(2021) Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces

Community Noise

E1779-96a(2004) Standard Guide for Preparing a Measurement Plan for Conducting Outdoor Sound Measurements (Withdrawn 2012)

E1014-12(2021) Standard Guide for Measurement of Outdoor A-Weighted Sound Levels

E1780-12(2021) Standard Guide for Measuring Outdoor Sound Received from a Nearby Fixed Source

E1503-22 Standard Test Method for Conducting Outdoor Sound Measurements Using a Statistical Sound Analysis System

E1686-23 Standard Guide for Applying Environmental Noise Measurement Methods and Criteria

Compression Seal and Lock Strip Gaskets

C963-00(2021) Standard Specification for Packaging, Identification, Shipment, and Storage of Lock-Strip Gaskets

C1166-21 Standard Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories

C542-05(2017) Standard Specification for Lock-Strip Gaskets

E2203-14(2018) Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories

C716-06(2020) Standard Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials

C864-05(2019) Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers

C1083-06(2020)e1 Standard Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials

C964-20 Standard Guide for Lock-Strip Gasket Glazing

C509-06(2021) Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material

C1115-17(2022) Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories

Control Systems

F3296-19 Standard Practice for Commercial Application of Electric Security Fences

F3297-19 Standard Practice for Corrections Application for Non-Lethal Electric Security Fences

F1465-03 Standard Guide for Selection of Security Control Systems (Withdrawn 2012)

Definitions and Editorial

C634-22 Standard Terminology Relating to Building and Environmental Acoustics

Detention Hardware

F3217-17 Standard Guide for Security Fasteners

F1577-05(2019) Standard Test Methods for Detention Locks for Swinging Doors

F1643-05(2019) Standard Test Methods for Detention Sliding Door Locking Device Assembly

F1758-05(2019) Standard Test Methods for Detention Hinges Used on Detention-Grade Swinging Doors

F2542-05(2019) Standard Test Methods for Physical Assault on Ventilation Grilles for Detention and Correctional Facilities

Durability Performance of Building Constructions

E3120-19 Standard Specification for Evaluating Accelerated Aging Performance of Environmentally Controlled Dynamic Glazings

E2323-04 Standard Test Method for Calculating the Concentration of Fill Gas in a Sealed Insulating Glass Unit Using Measurements From an Oxygen Analyzer (Withdrawn 2012)

E2269-21 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography

E1887-97 Standard Test Method for Fog Determination (Withdrawn 2006)

E2188-19 Standard Test Method for Insulating Glass Unit Performance

E2190-19 Standard Specification for Insulating Glass Unit Performance and Evaluation

E2189-19 Standard Test Method for Testing Resistance to Fogging in Insulating Glass Units

E3119-19 Standard Test Method for Accelerated Aging of Environmentally Controlled Dynamic Glazing

E2649-20 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy

E546-14(2020) Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units

E576-14(2020) Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units in the Vertical Position

E2953-14(2020)e1 Standard Specification for Evaluating Accelerated Aging Performance of Electrochromic Devices in Sealed Insulating Glass Units

E2094-02 Standard Practice for Evaluating the Service Life of Chromogenic Glazings (Withdrawn 2011)

E2241-06 Standard Test Method for Assessing the Current-Voltage Cycling Stability at Room Temperature of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units (Withdrawn 2015)

E773-01 Standard Test Method for Accelerated Weathering of Sealed Insulating Glass Units (Withdrawn 2010)

E774-97 Standard Specification for the Classification of the Durability of Sealed Insulating Glass Units (Withdrawn 2006)

E2240-06 Standard Test Method for Assessing the Current-Voltage Cycling Stability at 90°C (194°F) of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units (Withdrawn 2015)

E2354-10 Standard Guide for Assessing the Durability of Absorptive Electrochromic Coatings within Sealed Insulating Glass Units (Withdrawn 2019)

E2355-10 Standard Test Method for Measuring the Uniformity of an Absorptive Electrochromic Coating on a Glazing Surface (Withdrawn 2019)

E2141-21 Standard Test Method for Accelerated Aging of Electrochromic Devices in Sealed Insulating Glass Units

Exterior Insulation and Finish Systems (EIFS)

E2110-17 Standard Terminology for Exterior Insulation and Finish Systems (EIFS)

E2568-17a Standard Specification for PB Exterior Insulation and Finish Systems

E2134/E2134M-14(2018) Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS)

E2485/E2485M-13(2018) Standard Test Method for Freeze/Thaw Resistance of Exterior Insulation and Finish Systems (EIFS) and Water Resistive Barrier Coatings

E2273-18 Standard Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies

E2321-03(2019) Standard Practice for Use of Test Methods for Determining the Water Vapor Transmission (WVT) of Exterior Insulation and Finish Systems (EIFS)

E2570/E2570M-07(2019) Standard Test Methods for Evaluating Water-Resistive Barrier (WRB) Coatings Used under Exterior Insulation and Finish Systems (EIFS) or EIFS with Drainage

E2430/E2430M-19 Standard Specification for Expanded Polystyrene (“EPS”) Thermal Insulation Boards for Use in Exterior Insulation and Finish Systems (“EIFS”)

E2486/E2486M-22 Standard Test Method for Impact Resistance of Class PB and PI Exterior Insulation and Finish Systems (EIFS)

E2511-17(2023) Standard Guide for Detailing of EIFS-Clad Barrier and Drainage Wall Assemblies

E2098/E2098M-13(2023) Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution

E2359/E2359M-13(2023) Standard Test Method for Field Pull Testing of an In-Place Exterior Insulation and Finish System Clad Wall Assembly

Furnishings and Equipment

F3277-19 Standard Specification for Cantilevered Steel Bunks Used in Detention and Correctional Facilities

F1534-22 Standard Test Method for Determining Changes in Fire-Test-Response Characteristics of Cushioning Materials After Water Leaching

F1870-22 Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities

F1550-22 Standard Test Method for Determination of Fire-Test-Response Characteristics of Components or Composites of Mattresses or Furniture for Use in Correctional Facilities after Exposure to Vandalism, by Employing a Bench Scale Oxygen Consumption Calorimet

General Test Methods

C1815-17(2021) Standard Practice for Periodically Measuring and Monitoring Sealant Dimensions to Stability Following a Period of Compression or Tension

C1735-17(2021) Standard Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation

C1850-17(2021) Standard Guide for Improved Laboratory Accelerated Tests to Predict the Weathering and for Use in Developing Protocols to Predict the Design Life of Building Sealant Systems

C713-94(1999)e1 Standard Test Method for Slump of an Oil-Base Knife-Grade Channel Glazing Compound (Withdrawn 2002)

C741-93(1998) Standard Test Method for Accelerated Aging of Wood Sash Face Glazing Compound (Withdrawn 2002)

C742-99 Standard Test Method for Degree of Set for Wood Sash Glazing Compound (Withdrawn 2002)

C797-99 Terminology for Use of Oil- and Resin-Based Putty and Glazing Compounds (Withdrawn 2002)

D2376-00 Standard Test Method for Slump of Face Glazing and Bedding Compounds on Metal Sash (Withdrawn 2002)

D2451-99 Standard Test Method for Degree of Set for Glazing Compounds on Metal Sash (Withdrawn 2002)

C603-14(2019) Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants

C771-14(2019) Standard Test Method for Weight Loss After Heat Aging of Preformed Tape Sealants

C681-14(2019) Standard Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds

C772-03(2019) Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants

C1253-14(2019) Standard Test Method for Determining the Outgassing Potential of Sealant Backing

D2377-14(2019) Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants

C879-03(2019) Standard Test Methods for Release Papers Used with Preformed Tape Sealants

D2452-15(2019) Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds

C639-15(2020) Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants

D2453-15(2020)e1 Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds

C669-00 Standard Specification for Glazing Compounds for Back Bedding and Face Glazing of Metal Sash (Withdrawn 2002)

C570-00 Standard Specification for Oil- and Resin-Base Caulking Compound for Building Construction (Withdrawn 2002)

D2249-01 Standard Test Method for Predicting the Effect of Weathering on Face Glazing and Bedding Compounds on Metal Sash (Withdrawn 2002)

C1294-20 Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials

C661-15(2022) Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer

C679-15(2022) Standard Test Method for Tack-Free Time of Elastomeric Sealants

C731-15(2022) Standard Test Method for Extrudability, After Package Aging, of Latex Sealants

C1246-17(2022) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure

C1241-14(2022) Standard Test Method for Volume Shrinkage of Latex Sealants During Cure

C712-22 Standard Test Method for Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants

C1016-14(2022) Standard Test Method for Determination of Water Absorption of Sealant Backing (Joint Filler) Material

C711-22 Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants

C1085-91 Specification for Butyl Rubber Based Solvent-Release Sealants (Withdrawn 1997)

C718-93 Standard Test Method for Ultraviolet (UV)-Cold Box Exposure of One-Part, Elastomeric, Solvent-Release Type Sealants (Withdrawn 2002)

C1851-18(2023) Standard Practice for Determining the Extent of Cracking in a Sealant using the Difference between the Compressive and Tensile Modulus

D2203-01(2023) Standard Test Method for Staining from Sealants

C1087-23 Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems

C792-23 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants

C782-13(2023) Standard Test Method for Softness of Preformed Tape Sealants

C765-23 Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants

D2202-00(2023) Standard Test Method for Slump of Sealants

C1681-23 Standard Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain

C1266-17(2024) Standard Test Method for Flow Characteristics of Preformed Tape Sealants

C972-24 Standard Test Method for Compression-Recovery of Tape Sealant

C1183/C1183M-13(2024) Standard Test Method for Extrusion Rate of Elastomeric Sealants

Glass Use in Buildings

E997-15(2021) Standard Test Method for Evaluating Glass Breakage Probability Under the Influence of Uniform Static Loads by Proof Load Testing

E998-19 Standard Test Method for Structural Performance of Architectural Glass Products Under the Influence of Uniform Static Loads

E2431-12(2020) Standard Practice for Determining the Resistance of Single Glazed Annealed Architectural Flat Glass to Thermal Loadings

E2751/E2751M-21 Standard Practice for Design and Performance of Supported Laminated Glass Walkways

E2461-22 Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs

E1300-24 Standard Practice for Determining Load Resistance of Glass in Buildings

E3401/E3401M-24 Standard Practice for Design and Performance of Laminated Glass Subject to Hydrostatic Loads

High Rise Building External Evacuation Devices

E2484-08(2015) Standard Specification for Multi-Story Building External Evacuation Controlled Descent Devices (Withdrawn 2024)

E2513-07(2019)e1 Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems

Horizontal and Vertical Structures/Structural Performance of Completed Structures

E529-04(2018) Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction

E196-06(2018) Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs

E575-05(2018) Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies

E564-06(2018) Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings

E455-19 Standard Test Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings

E2126-19 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings

E73-13(2021) Standard Practice for Static Load Testing of Truss Assemblies

E2969-18 Standard Test Methods for Transverse Load Tests on Panels Used in Wall Construction

E3118/E3118M-22 Standard Test Methods to Evaluate Seismic Performance of Suspended Ceiling Systems by Full-Scale Dynamic Testing

E2127-01a(2022) Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction

E2954-15(2022) Standard Test Method for Axial Compression Test of Reinforced Plastic and Polymer Matrix Composite Vertical Members

E1803-14(2022) Standard Test Methods for Determining Strength Capacities of Structural Insulated Panels

E72-22 Standard Test Methods of Conducting Strength Tests of Panels for Building Construction

E661-22 Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads

E695-22 Standard Test Method of Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading

E2322-22 Standard Test Method for Conducting Transverse and Concentrated Load Tests on Panels used in Floor and Roof Construction

Materials and Processes for Durable Rigidwall Relocatable Structures

E865-20 Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels

E1555-20 Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair

E1556-20 Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair

E1730-19 Standard Specification for Rigid Foam for Use in Structural Sandwich Panel Cores

E1801-21 Standard Practice for Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters

PS138-03 Provisional Standard Specification for Shelter, Electrical Equipment, Lightweight (Withdrawn 2004)

E1800-21 Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (160 °F Elevated Humidity Service), Type I Panels

E1851-21 Standard Test Method for Electromagnetic Shielding Effectiveness of Durable Rigid Wall Relocatable Structures

E2517-21 Standard Specification for Cargo Bed Cover, Type III (M35A2, 212 Ton Cargo Truck/M1078, 212 Ton Lightweight Medium Tactical Vehicle (LMTV)/ M1082, 21

E1091-21 Standard Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels

E990-21 Standard Specification for Core-Splice Adhesive for Honeycomb Sandwich Structural Panels

E2377-18 Standard Specification for Shelter, Electrical Equipment, Lightweight

E1307-18 Standard Practice for Surface Preparation and Structural Adhesive Bonding of Precured, Nonmetallic Composite Facings to Structural Core for Flat Shelter Panels

E1925-18 Specification for Engineering and Design Criteria for Rigid Wall Relocatable Structures

E1773-18 Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants

E1749-18 Standard Terminology Relating to Rigid Wall Relocatable Shelters

E2462-18 Standard Performance Specification for Cargo Bed Cover (CBC) HMMWV, Type I

E2004-18 Standard Test Method for Facing Cleavage of Sandwich Panels

E1793-19 Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters

E1976-19 Standard Specification for Shelter, Tactical, Nonexpandable

E874-19 Standard Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels

E2518-19 Standard Specification for Cargo Bed Cover, Type IV (M923, 5 Ton Cargo Truck/M1083, 5 Ton Medium Tactical Vehicle (MTV)/M1082, 5 Ton MTV Trailer)

E2463-19 Standard Performance Specification for Cargo Bed Cover (CBC) M105A2 Trailer, Type II

E1974-19 Standard Specification for Shelter, Electrical Equipment S-250/G

E864-20 Standard Practice for Surface Preparation of Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels

E1794-22a Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (200 °F Elevated Humidity Service), Type II Panels

E1975-22 Standard Specification for Shelter, Electrical, Equipment S-280/G

E866-23 Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels

E1826-23 Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels

E1978-24 Standard Specification for Shelter, Tactical, Expandable, Two-Side

E1977-24 Standard Specification for Shelter, Tactical, Expandable, One-Side

Mechanical and Electrical System Noise

E477-20 Standard Test Method for Laboratory Measurements of Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers

E2459-05(2016) Standard Guide for Measurement of In-Duct Sound Pressure Levels from Large Industrial Gas Turbines and Fans

E1124-10(2016) Standard Test Method for Field Measurement of Sound Power Level by the Two-Surface Method

E1265-04(2021) Standard Test Method for Measuring Insertion Loss of Pneumatic Exhaust Silencers

E1222-22 Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems

E1574-98(2023) Standard Test Method for Measurement of Sound in Residential Spaces

E2202-23 Standard Practice for Measurement of Equipment-Generated Continuous Noise for Assessment of Health Hazards

Performance of Building Enclosures

E1825-21 Standard Guide for Evaluation of Building Exterior Enclosure Materials, Products, and Systems

E2505-07(2014)e1 Standard Practice for Industrial Rope Access (Withdrawn 2023)

E2270-14(2019) Standard Practice for Periodic Inspection of Building Facades for Unsafe Conditions

E2841-19 Standard Guide for Conducting Inspections of Building Facades for Unsafe Conditions

E3036-15(2021) Standard Guide for Notating Facade Conditions in the Field

E2925-19a Standard Specification for Manufactured Polymeric Drainage and Ventilation Materials Used to Provide a Rainscreen Function

E3223/E3223M-20 Standard Guide for Specifying and Testing Field-Constructed Exterior Building Wall System Mockups in New Construction

E2128-20 Standard Guide for Evaluating Water Leakage of Building Walls

E2947-21a Standard Guide for Building Enclosure Commissioning

E2266-22 Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion

D779-16(2022) Standard Test Method for Determining the Water Vapor Resistance of Sheet Materials in Contact with Liquid Water by the Dry Indicator Method

E2556/E2556M-10(2022) Standard Specification for Vapor Permeable Flexible Sheet Water-Resistive Barriers Intended for Mechanical Attachment

E2099-23 Standard Practice for Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems

E2813-24 Standard Practice for Building Enclosure Commissioning

Performance of Metal Roof Systems

E1592-05(2017) Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference

E1637-98(2017)e1 Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems

E1646-95(2018) Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference

E1680-16(2022) Standard Test Method for Rate of Air Leakage through Exterior Metal Roof Panel Systems

E2140-01(2023) Standard Test Method for Water Penetration of Metal Roof Panel Systems by Static Water Pressure Head

E1514-98(2023)e1 Standard Specification for Structural Standing Seam Steel Roof Panel Systems

Performance of Railing Systems and Glass for Floors and Stairs

E2353-21 Standard Test Methods for Performance of Glazing in Permanent Railing Systems, Guards, and Balustrades

E1481-00a(2021) Standard Terminology of Railing Systems and Rails for Buildings

E935-21 Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings

E894-23 Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings

E2358-24 Standard Specification for Performance of Glazing in Permanent Railing Systems, Guards, and Balustrades

E985-24 Standard Specification for Permanent Metal Railing Systems and Rails for Buildings

Performance of Windows, Doors, Skylights and Curtain Walls

E283/E283M-19 Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Skylights, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen

E1017-88(1994) Standard Specification for Generic Performance Requirements for Exterior Residential Window Assemblies (Withdrawn 2003)

E1886-19 Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials

E547-00(2016) Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference

E1233/E1233M-14(2021) Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential

E1423-21 Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems

E987-88(2017) Standard Test Methods for Deglazing Force of Fenestration Products

E1748-95(2017) Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System

E2692-10(2018) Standard Test Method for Structural Performance of Thermal Barriers in Fenestration Products

E405-04(2018) Standard Test Methods for Wear Testing Rotary Operators for Windows

E783-02(2018) Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors

E330/E330M-14(2021) Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference

E2025-99(2006) Standard Test Method for Evaluating Fenestration Components and Assemblies for Resistance to Impact Energies (Withdrawn 2015)

E2395-21 Standard Specification for Voluntary Security Performance of Window and Door Assemblies with Glazing Impact

E2319-22 Standard Test Method for Determining Air Flow Through the Face and Sides of Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen

E2068-00(2022) Standard Test Method for Determination of Operating Force of Sliding Windows and Doors

E1424-22 Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Skylights, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen

E331-00(2023) Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference

E1105-15(2023) Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference

E1425-14(2023) Standard Practice for Determining the Acoustical Performance of Windows, Doors, Skylight, and Glazed Wall Systems

E2268-04(2023) Standard Test Method for Water Penetration of Exterior Windows, Skylights, and Doors by Rapid Pulsed Air Pressure Difference

E2112-23 Standard Practice for Installation of Exterior Windows, Doors and Skylights

F588-17(2023) Standard Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact

F842-17(2023) Standard Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact

E1996-23 Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes

E2264-23 Standard Practice for Determining the Effects of Temperature Cycling on Fenestration Products

Physical Barriers

A629-88(1994)e1 Standard Specification for Tool-Resisting Steel Flat Bars and Shapes for Security Applications (Withdrawn 2004)

A627-03(2019) Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities

A750-77(1994)e1 Standard Specification for Steel Air Ventilating Grille Units for Detention Areas (Withdrawn 2004)

F1916-98 Standard Specifications for Selecting Chain Link Barrier Systems With Coated Chain Link Fence Fabric and Round Posts for Detention Applications (Withdrawn 2008)

F1450-12a(2019) Standard Test Methods for Hollow Metal Swinging Door Assemblies for Detention and Correctional Facilities

F1592-12(2019) Standard Test Methods for Detention Hollow Metal Vision Systems

F1915-05(2019) Standard Test Methods for Glazing for Detention Facilities

F2322-12(2019) Standard Test Methods for Physical Assault on Vertical Fixed Barriers for Detention and Correctional Facilities

F2956-22 Standard Test Methods for Anchor Systems Used for Detention Hollow Metal Systems

F2697-24 Standard Test Methods for Physical Assault on Overhead Horizontal Fixed Barriers for Detention and Correctional Facilities

Research

E717-84(1999) Standard Guide for Preparation of the Accreditation Annex of Acoustical Test Standards (Withdrawn 2008)

E3359-23 Standard Practice for Measurement of Sound Pressure Level Differences and Decay Curves Using the Impulse Response Method with Swept Sinusoidal Signals

E3091-17(2024) Standard Specification for Systems to Measure Sound Levels

Sampling and Analysis of Lead for Exposure and Risk Assessment

D6785-20 Standard Test Method for Determination of Lead in Workplace Air Using Flame or Graphite Furnace Atomic Absorption Spectrometry

E1795-20a Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings

E1797-12(2017)e1 Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings

E2120-10(2016) Standard Practice for Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films

E1726-21 Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis

E1644-21 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead

E1645-21 Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis

E2913/E2913M-21 Standard Practice for Hotplate Digestion of Lead from Composited Wipe Samples

E2914/E2914M-21 Standard Practice for Ultrasonic Extraction of Lead from Composited Wipe Samples

E1613-12 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques (Withdrawn 2021)

E1583-21a Standard Practice for Evaluating Laboratories Engaged in Determination of Lead in Paint, Dust, Airborne Particulates, and Soil Taken From and Around Buildings and Related Structures

E2255/E2255M-22 Standard Practice for Conducting Visual Assessments for Lead Hazards in Buildings

E2271/E2271M-22 Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Multifamily Dwellings

E2252-22 Standard Practice for Selection of Lead Hazard Reduction Methods for Identified Risks in Residential Housing or Child Occupied Facilities

E1753-22 Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films

E1605-22 Standard Terminology Relating to Lead in Buildings

E2115-22 Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities

E1979-21 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead

E3193-23 Standard Test Method for Measurement of Lead (Pb) by Flame Atomic Absorption Spectrophotometry (FAAS)

E1727-24 Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination

E1728/E1728M-24 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination

E1796-24 Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings

E1908-24 Standard Practice for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)

E2239-24 Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities

D8568-24 Standard Test Method for Determination of Lead by Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques

E1792-24 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust

E2119-24 Standard Practice for Quality Systems for Conducting In Situ Measurements of Lead Content in Paint or Other Coatings Using Field-Portable X-Ray Fluorescence (XRF) Devices

E3074/E3074M-24 Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Single Family Dwellings, in Individual Units of Multifamily Dwellings, and in Other Child-Occupied Facilities

E1729-24 Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination

E3203-24a Standard Test Method for Determination of Lead by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES)

E1775-24 Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead

Serviceability

E2393-20a Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers

E621-94(1999)e1 Standard Practice for the Use of Metric (SI) Units in Building Design and Construction (Committee E-6 Supplement to E380) (Withdrawn 2008)

E154/E154M-08a(2019) Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover

E2786-10(2019) Standard Test Methods for Measuring Expansion of Intumescent Materials Used in Firestop and Joint Systems

E2923-14(2019) Standard Practice for Longevity Assessment of Firestop Materials Using Differential Scanning Calorimetry

E1993/E1993M-98(2020) Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs

E2924-14(2020) Standard Practice for Intumescent Coatings

E2174-20a Standard Practice for On-Site Inspection of Installed Firestop Systems

E713-88(2002) Standard Guide for Selection of Scales for Metric Building Drawings (Withdrawn 2010)

E835/E835M-93(2002) Standard Guide for Modular Coordination of Clay and Concrete Masonry Units (Withdrawn 2011)

E1155M-14 Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers (Metric) (Withdrawn 2023)

E577-85(2002) Standard Guide for Dimensional Coordination of Rectilinear Building Parts and Systems (Withdrawn 2011)

E3037-20 Standard Test Method for Measuring Relative Movement Capabilities of Through-Penetration Firestop Systems

E2785-14(2022) Standard Test Method for Exposure of Firestop Materials to Severe Environmental Conditions

E1399/E1399M-97(2022) Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems

E1486-14(2022) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria

E1486M-14(2022) Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria (Metric)

E1612/E1612M-94(2022) Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures

E2634-18(2022) Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems

E3038-22a Standard Practice for Assessing and Qualifying Candidates as Inspectors of Firestop Systems and Fire-Resistive Joint Systems

E736/E736M-19(2023) Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members

E759/E759M-92(2023) Standard Test Method for Effect of Deflection on Sprayed Fire-Resistive Material Applied to Structural Members

E859/E859M-23 Standard Test Method for Air Erosion of Sprayed Fire-Resistive Materials (SFRMs) Applied to Structural Members

E1745-17(2023) Standard Specification for Plastic Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs

E605/E605M-19(2023) Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members

E760/E760M-92(2023) Standard Test Method for Effect of Impact on Bonding of Sprayed Fire-Resistive Material Applied to Structural Members

E761/E761M-92(2023) Standard Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members

E937/E937M-93(2023) Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members

E1513/E1513M-93(2023) Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs)

E3157-23 Standard Guide for Understanding and Using Information Related to Installation of Firestop Systems

E1783/E1783M-24 Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures

E3385-24 Standard Practice for On-Site Inspection of Fire Resistive Duct Systems

E1155/E1155M-23 Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers

E1643-24 Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs

Solid Fuel Burning Appliances

E1602-03(2017) Standard Guide for Construction of Solid Fuel Burning Masonry Heaters

E2515-11(2017) Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution Tunnel

E2780-10(2017) Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters

E2779-10(2017) Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters

E2817-11(2018) Standard Test Method for Test Fueling Masonry Heaters

E2618-13(2019) Standard Test Method for Measurement of Particulate Emissions and Heating Efficiency of Solid Fuel-Fired Hydronic Heating Appliances

E2778-14(2021) Standard Specification for Custom Tiled/Mortared Masonry Heaters (Stoves)

E2558-13(2021) Standard Test Method for Determining Particulate Matter Emissions from Fires in Wood-Burning Fireplaces

E3053-18e2 Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters Using Cordwood Test Fuel

E1509-22 Standard Specification for Room Heaters, Pellet Fuel-Burning Type

Sound Absorption

E2235-04(2020) Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods

C384-04(2022) Standard Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method

C522-03(2022) Standard Test Method for Airflow Resistance of Acoustical Materials

E795-23 Standard Practices for Mounting Test Specimens During Sound Absorption Tests

E1050-24 Standard Test Method for Impedance and Absorption of Acoustical Materials Using a Tube, Two Microphones and a Digital Frequency Analysis System

E2611-24 Standard Test Method for Normal Incidence Determination of Porous Material Acoustical Properties Based on the Transfer Matrix Method

C423-23e1 Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method

Sound Transmission

E1414/E1414M-21a Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum

E1408-91(2000) Standard Test Method for Laboratory Measurement of the Sound Transmission Loss of Door Panels and Door Systems (Withdrawn 2009)

E2964-21 Standard Test Method for Measurement of the Normalized Insertion Loss of Doors

E1704-95(2018) Standard Guide for Specifying Acoustical Performance of Sound-Isolating Enclosures

E966-18a Standard Guide for Field Measurements of Airborne Sound Attenuation of Building Facades and Facade Elements

E2249-19 Standard Test Method for Laboratory Measurement of Airborne Transmission Loss of Building Partitions and Elements Using Sound Intensity

E1289-08(2022) Standard Specification for Reference Specimen for Sound Transmission Loss

E413-22 Classification for Rating Sound Insulation

E1332-22 Standard Classification for Rating Outdoor-Indoor Sound Attenuation

E596-22 Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures

E336-23 Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings

E90-23 Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements

Specifications, Guides and Practices

C1756-17a Standard Guide for Comparing Seal or Sealant Behavior to Reference Photographs

C920-18 Standard Specification for Elastomeric Joint Sealants

C1375-00(2020) Standard Guide for Substrates Used in Testing Building Seals and Sealants

C1392-20 Standard Guide for Evaluating Failure of Structural Sealant Glazing

C1299-03 Standard Guide for Use in Selection of Liquid-Applied Sealants (Withdrawn 2012)

C1564-20 Standard Guide for Use of Silicone Sealants for Protective Glazing Systems

C1369-19 Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units

C1520-20 Standard Guide for Paintability of Latex Sealants

C1394-20 Standard Guide for In-Situ Structural Silicone Glazing Evaluation

C1518-22 Standard Specification for Precured Elastomeric Silicone Joint Sealants

C1311-22 Standard Specification for Solvent Release Sealants

C1472-16(2022) Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width

C1281-16(2023) Standard Specification for Preformed Tape Sealants for Glazing Applications

C1249-18(2023) Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications

C834-17(2023) Standard Specification for Latex Sealants

C1021-08(2023) Standard Practice for Laboratories Engaged in Testing of Building Sealants

C1193-16(2023) Standard Guide for Use of Joint Sealants

C1184-23 Standard Specification for Structural Silicone Sealants

C1330-23 Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants

C1401-23 Standard Guide for Structural Sealant Glazing

C919-24 Standard Practice for Use of Sealants in Acoustical Applications

C1481-12(2024) Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)

C1487-19(2024) Standard Guide for Remedying Structural Silicone Glazing

Speech Privacy

E1041-85(1998) Standard Guide for Measurement of Masking Sound in Open Offices (Withdrawn 2002)

E2638-10(2017) Standard Test Method for Objective Measurement of the Speech Privacy Provided by a Closed Room

E1374-18e1 Standard Guide for Office Acoustics and Applicable ASTM Standards

E1110-06(2019) Standard Classification for Determination of Articulation Class

E1179-13(2019) Standard Specification for Sound Sources Used for Testing Open Office Components and Systems

E1376-90(2002) Standard Test Method for Measuring the Interzone Attenuation of Sound Reflected by Wall Finishes and Furniture Panels (Withdrawn 2005)

E1375-90(2002) Standard Test Method for Measuring the Interzone Attenuation of Furniture Panels Used as Acoustical Barriers (Withdrawn 2005)

E1130-16(2021) Standard Test Method for Objective Measurement of Speech Privacy in Open Plan Spaces Using Articulation Index

E1111/E1111M-14(2022) Standard Test Method for Measuring the Interzone Attenuation of Open Office Components

E1573-22 Standard Test Method for Measurement and Reporting of Masking Sound Levels Using A-Weighted and One-Third-Octave-Band Sound Pressure Levels

Structural Acoustics and Vibration

E1007-21 Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures

E989-21 Standard Classification for Determination of Single-Number Metrics for Impact Noise

E2179-21 Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors

E3207-21 Standard Classification for Determination of Low-Frequency Impact Noise Ratings

E3133-18e1 Standard Test Method for Laboratory Measurement of Floor Impact Sound Radiation Using the Tapping Machine (Withdrawn 2023)

E3222-20a Standard Classification for Determination of High-frequency Impact Sound Ratings

E492-22 Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine

E1123-86(2023) Standard Practices for Mounting Test Specimens for Sound Transmission Loss Testing of Naval and Marine Ship Bulkhead Treatment Materials

E756-05(2023) Standard Test Method for Measuring Vibration-Damping Properties of Materials

E2963-24 Standard Test Method for Laboratory Measurement of Acoustical Effectiveness of Ship Noise Treatments

Structural Performance of Connections in Building Construction

E489-92(1997) Standard Test Method for Tensile Strength Properties of Metal Connector Plates (Withdrawn 2005)

E2265-17 Standard Terminology for Anchors and Fasteners in Concrete and Masonry

E3121/E3121M-17 Standard Test Methods for Field Testing of Anchors in Concrete or Masonry

E1807-01 Standard Terminology Pertaining to Metal Connector Plates (Withdrawn 2005)

E767-96(2001) Standard Test Method for Shear Strength Properties of Metal Connector Plates (Withdrawn 2005)

E1190-21 Standard Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Members

E488/E488M-22 Standard Test Methods for Strength of Anchors in Concrete Elements

E754-80(2022) Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints

E1512-01(2023) Standard Test Methods for Testing Bond Performance of Bonded Anchors

Terminology and Editorial

E631-15(2024) Standard Terminology of Building Constructions

Terminology of Building Seals and Sealants

C717-24 Standard Terminology of Building Seals and Sealants

Weathering

C1442-14(2021) Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus

C734-15(2019) Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering

C510-16(2022) Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants

C732-17(2022) Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants

C1519-10(2022) Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures

C1248-22 Standard Test Method for Staining of Porous Substrate by Joint Sealants

C1589/C1589M-18(2023) Standard Practice for Outdoor Weathering of Construction Seals and Sealants

C793-23 Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants

C1257-15(2023) Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants

C1501-23 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures

Whole Buildings and Facilities

E1692-95a(2018) Standard Classification for Serviceability of an Office Facility for Change and Churn by Occupants

E1693-95(2018) Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets

E1701-95(2018) Standard Classification for Serviceability of an Office Facility for Manageability

E1700-16 Standard Classification for Serviceability of an Office Facility for Structure and Building Envelope

E1836/E1836M-09(2016) Standard Practice for Building Floor Area Measurements for Facility Management

E2619/E2619M-17 Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Area in Buildings

E1661-95a(2018) Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness

E1660-95a(2018) Standard Classification for Serviceability of an Office Facility for Support for Office Work

E1664-19 Standard Classification for Serviceability of an Office Facility for Layout and Building Factors

E1662-95a(2018) Standard Classification for Serviceability of an Office Facility for Sound and Visual Environment

E2320-19 Standard Classification for Serviceability of an Office Facility for Thermal Environment and Indoor Air Conditions

E1665-95a(2018) Standard Classification for Serviceability of an Office Facility for Facility Protection

E1668-95a(2018) Standard Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff

E1667-95a(2018) Standard Classification for Serviceability of an Office Facility for Image to the Public and Occupants

E1666-95a(2018) Standard Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions

E1670-95a(2018) Standard Classification for Serviceability of an Office Facility for Management of Operations and Maintenance

E1669-95a(2018) Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding

E1679-13(2019) Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility, and for Determining What Serviceability is Provided or Proposed

E1671-95a(2018) Standard Classification for Serviceability of an Office Facility for Cleanliness

E1410-91(2005) Standard Practice for Specifying Data for Evaluation of Energy Used in Residential Buildings (Withdrawn 2014)

E1464-92(2005) Standard Guide for Developing Energy Monitoring Protocols for Commercial and Institutional Buildings or Facilities (Withdrawn 2014)

E2351-04a(2013) Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Functionality (Withdrawn 2022)

E2136-04(2013) Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Durability (Withdrawn 2022)

E2156-04(2013) Standard Guide for Evaluating Economic Performance of Alternative Designs, Systems, and Materials in Compliance with Performance Standard Guides for Single-Family Attached and Detached Dwellings (Withdrawn 2022)

E1334-95(2012) Standard Practice for Rating the Serviceability of a Building or Building-Related Facility (Withdrawn 2013)

E2151-02(2010) Standard Terminology of Guides for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings (Withdrawn 2019)

E2267-04(2013) Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings—Indoor Air Quality (Withdrawn 2022)

E1480-92(2022) Standard Terminology of Facility Management (Building-Related)

E1663-22 Standard Classification for Serviceability of an Office Facility for Typical Office Information Technology

E1694-22 Standard Classification for Serviceability of an Office Facility for Special Facilities and Technologies

E3369-24 Standard Specification for Determining the Flood Damage Resistance Rating of Building Materials

E3075-24 Standard Test Method for Water Immersion and Drying for Evaluation of Flood Damage Resistance

E2557-24 Standard Practice for Probable Maximum Loss (PML) Evaluations for Earthquake Due-Diligence Assessments

E2026-24 Standard Guide for Seismic Risk Assessment of Buildings