D4167-21 Standard Specification for Fiber-Reinforced Plastic Fans and Blowers

D1785-21a Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120

D8366-21a Standard Specification for Extruded and Compression Molded Shapes Made from Unfilled Poly(Vinylidene Fluoride) PVDF

F913-02(2021) Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe

D7133-21 Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids

D1693-21 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics

F2946-12(2021) Standard Specification for PVC Hub and Elastomeric Seal (Gasket) Tee Connection for Joining Plastic Pipe to Insitu Pipelines and Manholes

F2881/F2881M-21e1 Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications

F2331-11(2021) Standard Test Method for Determining Chemical Compatibility of Substances in Contact with Thermoplastic Pipe and Fittings Materials

D706-20 Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds (CA)

D3753-20 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Manholes and Wetwells

D4065-20 Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures

D2683-20 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing

F1336-20 Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings

D1622-20 Standard Test Method for Apparent Density of Rigid Cellular Plastics

D5048-20a Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame

D4889-21 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates

D5207-20 Standard Practice for Confirmation of 20-mm (50-W) and 125-mm (500-W) Test Flames for Small-Scale Burning Tests on Plastic Materials

D5990-20a Standard Classification System and Basis for Polyketone Injection Molding and Extrusion Materials (PK)

D2680-20 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping

D5523-21 Standard Test Method for Polyurethane Raw Materials: Acidity by Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates

D6341-21 Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between –30 and 140°F (–34.4 and 60°C)

D3576-20 Standard Test Method for Cell Size of Rigid Cellular Plastics

D3295-20 Standard Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing

D3453-20 Standard Specification for Flexible Cellular Materials—Urethane for Furniture and Automotive Cushioning, Bedding, and Similar Applications

D2126-20 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging

D7027-20 Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine

F3372-20 Standard Practice for Butt Fusion Joining of PA12 Pipe and Fittings

F1041-20 Standard Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing

D1056-20 Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber

D7399-18 Standard Test Method for Determination of the Amount of Polypropylene in Polypropylene/Low Density Polyethylene Mixtures Using Infrared Spectrophotometry

D6867-19 Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing

D8195-18 Standard Classification System and Basis for Specification for Polyethylene Terephthalate Film and Sheeting

D5740-18 Standard Guide for Writing Material Standards in the Classification D4000 Format

D2383-19 Standard Test Method for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds Under Humid Conditions

D4659-19 Standard Test Methods for Polyurethane Raw Materials: Determination of Specific Gravity of Isocyanates

D4968-19a Standard Practice for Annual Review of Test Methods and Specifications for Plastics

D1045-19 Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics

D957-21 Standard Practice for Determining Surface Temperature of Molds for Plastics

D3367-21 Standard Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force

D4459-21 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications

D7997-21 Standard Practice for Polyurethane Raw Materials: Gel Tests for Polyurethane Non-Foam Formulations

D6868-21 Standard Specification for Labeling of End Items that Incorporate Plastics and Polymers as Coatings or Additives with Paper and Other Substrates Designed to be Aerobically Composted in Municipal or Industrial Facilities

D5226-21 Standard Practice for Dissolving Polymer Materials

D2412-21 Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading

F794-21 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter

F3190-21 Standard Practice for Heat Fusion Equipment (HFE) Operator Qualification on Polyethylene (PE) and Polyamide (PA) Pipe and Fittings

F3373-21 Standard Specification for Polyethylene (PE) Electrofusion Fittings for Outside Diameter Controlled Crosslinked Polyethylene (PEX) Pipe

D7990-21 Standard Test Method for Using Reflectance Spectra to Produce an Index of Temperature Rise in Polymeric Siding

D1003-21 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics

F2657-21 Standard Test Method for Outdoor Weathering Exposure of Crosslinked Polyethylene (PEX) Tubing

F656-21 Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings

F2854-21 Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing

D6394-21a Standard Classification System for and Basis for Specification for Sulfone Plastics (SP)

D1755-21 Standard Specification for Poly(Vinyl Chloride) Resins

D3420-21 Standard Test Method for Pendulum Impact Resistance of Plastic Film

D5507-21a Standard Test Method for Determination of Trace Organic Impurities in Monomer Grade Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography

D3841-21 Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels

D7082-21 Standard Specification for Polyethylene Stay In Place Form System for End Walls for Drainage Pipe

F2829/F2829M-21 Standard Specification for Metric- and Inch-Sized Fittings for Crosslinked Polyethylene (PEX) Pipe

D955-21 Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics

D2582-21 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting

D2143-21 Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe

D2997-21 Standard Specification for Centrifugally Cast “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

R0077 ISO Standards and Recommendations on Plastic Pipe Prepared by ISO/TC 138 (This is not an ASTM standard; available as PDF, only)

D2457-21 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics

D3982-21 Standard Specification for Contact Molded “Fiberglass” (Glass Fiber Reinforced Thermosetting Resin) Ducts

F2763/F2763M-16(2021)e1 Standard Specification for 12 to 60 in. [300 to 1500 mm] Dual and Triple Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications

F610/F610M-21 Standard Practice for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique

D1763-00(2021) Standard Specification for Epoxy Resins

F477-14(2021) Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe

D1499-13(2021) Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics

D2176-16(2021) Standard Test Method for Folding Endurance of Paper and Plastics Film by the M.I.T. Tester

D2116-16(2021) Standard Specification for FEP Resin Molding and Extrusion Materials

D3013-13(2021) Standard Specification for Epoxy Molding Compounds

D6360-15(2021) Standard Practice for Enclosed Carbon-Arc Exposures of Plastics

D4549-15(2021) Standard Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)

D4473-08(2021) Standard Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior

D4475-21 Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method

D7473/D7473M-21 Standard Test Method for Weight Attrition of Non-floating Plastic Materials by Open System Aquarium Incubations

D3914-02(2016) Standard Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod

D4635-16 Standard Specification for Plastic Films Made from Low-Density Polyethylene and Linear Low-Density Polyethylene for General Use and Packaging Applications

D5420-21 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)

D1004-21 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting

D1790-21 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact

D2444-21 Standard Practice for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)

D6226-21 Standard Test Method for Open Cell Content of Rigid Cellular Plastics

D8036-16 Standard Test Method for Polyurethane Raw Materials: Determination of Dimer Ratio in Pure MDI

D4819-13(2021)e1 Standard Specification for Flexible Cellular Materials Made From Polyolefin Plastics

F1735-21 Standard Specification for Poly (Vinyl Chloride) (PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits

D4671-21 Standard Test Method for Polyurethane Raw Materials: Determination of Unsaturation of Polyols

D7856-21 Standard Specification for Color and Appearance Retention of Solid and Variegated Color Plastic Siding Products using CIELab Color Space

D1786-21 Standard Specification for Toluene Diisocyanate

D4329-21 Standard Practice for Fluorescent Ultraviolet (UV) Lamp Apparatus Exposure of Plastics

D5227-21 Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins

D618-21 Standard Practice for Conditioning Plastics for Testing

F1804-21 Standard Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation

D3465-21 Standard Guide for Purity of Monomeric Plasticizers by Gas Chromatography

F3033-16(2021) Standard Practice for Installation of a Single-Sized, Cured-In-Place Liner Utilizing an Inflatable Bladder for Resurfacing Manhole Walls of Various Shapes and Sizes

F2785-21 Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings

F2929-17(2021) Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig

D6712-17 Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes

D1248-16 Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable

D6865-17 Standard Classification System and Basis for Specifications for Acrylonitrile–Styrene–Acrylate (ASA) and Acrylonitrile–EPDM–Styrene (AES) Plastics and Alloys Molding and Extrusion Materials

D4275-17 Standard Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and Ethylene–Vinyl Acetate (EVA) Copolymers by Gas Chromatography

D2990-17 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics

D3574-17 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams

D5083-17 Standard Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens

F2737-11(2021) Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units

D5279-21 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Torsion

F3507-21 Standard Practice for Butt-Fusion Joining of Crosslinkable Polyethylene (CX-PE) Pipe and Tubing

D5930-17 Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique

D1998-21 Standard Specification for Polyethylene Upright Storage Tanks

F1698-21 Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits

F2164-21 Standard Practice for Field Leak Testing of Polyethylene (PE) and Crosslinked Polyethylene (PEX) Pressure Piping Systems Using Hydrostatic Pressure

D7474-17 Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents

D1636-21 Standard Specification for Allyl Molding Compounds

D4203-17 Standard Specification for and Basis for Specifications for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials

D1896/D1896M-10(2017) Standard Practice for Transfer Molding Test Specimens of Thermosetting Compounds

D7029-17 Standard Test Method for Determination of Reactivity of Unsaturated Polyesters and Vinyl Esters at 180.0°F (82.2°C)

D6338-17 Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPV) Based on ASTM Standard Test Methods

D5028-17 Standard Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis

F2390-21 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV) Pipe and Fittings Having Post-Industrial Recycle Content

D3123-09(2017) Standard Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds

F1947-21a Standard Practice for Installation of Folded Poly(Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits

D3307-21 Standard Specification for Perfluoroalkoxy (PFA) Resin Molding and Extrusion Materials

D5419-21 Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures

D3418-21 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry

D7310-21 Standard Practice for Defect Detection and Rating of Plastic Films Using Optical Sensors

D3965-21 Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings

D3222-21 Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials

D5117-17 Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock

D6100-17 Standard Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes (POM)

D6980-17 Standard Test Method for Determination of Moisture in Plastics by Loss in Weight

D8069-17a Standard Test Method for Determining Flexural Modulus of Full Section Pultruded Fiber Reinforced Polymer (FRP) Composite Members with Doubly Symmetric Cross Sections under Bending

D5592-94(2018) Standard Guide for Material Properties Needed in Engineering Design Using Plastics

D6287-17 Standard Practice for Cutting Film and Sheeting Test Specimens

F2787-13(2018) Standard Practice for Structural Design of Thermoplastic Corrugated Wall Stormwater Collection Chambers

F2922-13(2018) Standard Specification for Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers

D5511-18 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions

D787-18 Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds

D4754-18 Standard Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell

D4603-18 Standard Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer

D1601-18 Standard Test Method for Dilute Solution Viscosity of Ethylene Polymers

F2433-05(2018) Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness

D7292-18 Standard Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI)

D5989-18 Standard Specification for Extruded and Monomer Cast Shapes Made from Nylon (PA)

D5477-18 Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)

F402-18 Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings

D8156-18 Standard Classification System for and Basis of Specifications for Thermoplastic Elastomer Copolyester Molding and Extrusion Materials (TPC)

D5422-17 Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer

D3045-18 Standard Practice for Heat Aging of Plastics Without Load

D1708-18 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens

D6068-10(2018) Standard Test Method for Determining J-R Curves of Plastic Materials

D2584-18 Standard Test Method for Ignition Loss of Cured Reinforced Resins

D5526-18 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions

D3016-97(2018) Standard Practice for Use of Liquid Exclusion Chromatography Terms and Relationships

D6645-18 Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry

D6953-18 Standard Test Method for Determination of Antioxidants and Erucamide Slip Additives in Polyethylene Using Liquid Chromatography (LC)

F1674-18 Standard Test Method for Joint Restraint Products for Use with PVC Pipe

F645-18b Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems

D3826-18 Standard Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test

D5813-04(2018) Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems

F1290-19 Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings

D1921-18 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials

F2263-14(2019) Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water

D1525-17e1 Standard Test Method for Vicat Softening Temperature of Plastics

D3895-19 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry

D2222-19 Standard Test Method for Methanol Extract of Vinyl Chloride Resins

D1938-19 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method

D3749-19 Standard Test Method for Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins by Gas Chromatographic Headspace Technique

D3748-14(2019) Standard Practice for Evaluating High-Density Rigid Cellular Plastics

D3596-19 Standard Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins

D4443-19 Standard Test Method for Determining Residual Vinyl Chloride Monomer Content in PPB Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography

D7132-19 Standard Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene Foam

D6339-11(2019) Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS)

D3419-12(2019) Standard Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds

D3364-99(2019) Standard Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications

D2842-19 Standard Test Method for Water Absorption of Rigid Cellular Plastics

D5224-12(2019) Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds

D3595-14(2019)e1 Standard Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film

D3012-19 Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven

D6289-13(2019) Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics

D6869-17 Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)

D6358-19e1 Standard Classification System and Basis for Specification for Poly (Phenylene Sulfide) (PPS) Injection Molding, Extrusion and Blow Molding Materials Using ISO Methods

D4097-19 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks

F1803-15(2019) Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter 

F481-97(2019) Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields

D7993-15(2019) Standard Guide for Analyzing Complex Phthalates

D5155-19 Standard Test Methods for Polyurethane Raw Materials: Determination of the Isocyanate Content of Aromatic Isocyanates

F1924-19 Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing

D789-19 Standard Test Method for Determination of Relative Viscosity of Concentrated Polyamide (PA) Solutions

D5748-95(2019) Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film

D3124-98(2019) Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry

D4066-13(2019) Standard Classification System for Nylon Injection and Extrusion Materials (PA)

D494-11(2019) Standard Test Method for Acetone Extraction of Phenolic Molded or Laminated Products

F1588-96(2019) Standard Test Method for Constant Tensile Load Joint Test (CTLJT)

D6456-10(2018) Standard Specification for Finished Parts Made from Polyimide Resin

F2434-19 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing

F1606-19 Standard Practice for Rehabilitation of Existing Sewers and Conduits with Deformed Polyethylene (PE) Liner

D4385-19 Standard Practice for Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products

D2287-19 Standard Classification System and Basis for Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds

D953-19 Standard Test Method for Pin-Bearing Strength of Plastics

D3014-19a Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position

D7745-19 Standard Practice for Testing Pultruded Composites

D4020-18 Standard Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials

D648-18 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position

D5296-19 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography

D3139-19 Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals

D6110-18 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics

D3678-19 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions

F1948-20 Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing

D882-18 Standard Test Method for Tensile Properties of Thin Plastic Sheeting

F3430-20 Standard Specification for Closed-Cell Cellular Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers

D5685-19 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings

D7475-20 Standard Test Method for Determining the Aerobic Degradation and Anaerobic Biodegradation of Plastic Materials under Accelerated Bioreactor Landfill Conditions

F949-20 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings

D3839-14(2019) Standard Guide for Underground Installation of “Fiberglass” (Glass-Fiber Reinforced Thermosetting-Resin) Pipe

D5132-20 Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles

D4883-18 Standard Test Method for Density of Polyethylene by the Ultrasound Technique

D4218-20 Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds by the Muffle-Furnace Technique

D3801-20a Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position

D6778-20 Standard Classification System and Basis for Specification for Polyoxymethylene Molding and Extrusion Materials (POM)

C581-20 Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service

D7192-20 Standard Test Method for High Speed Puncture Properties of Plastic Films Using Load and Displacement Sensors

D3575-20 Standard Test Methods for Flexible Cellular Materials Made from Olefin Polymers

D6290-19 Standard Test Method for Color Determination of Plastic Pellets

D7823-20 Standard Test Method for Determination of Low Level Phthalates in Poly (Vinyl Chloride) Plastics by Thermal Desorption—Gas Chromatography/Mass Spectrometry

D1784-20 Standard Classification System and Basis for Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds

D3262-20 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe

F2561-20 Standard Practice for Rehabilitation of a Sewer Service Lateral and Its Connection to the Main Using a One Piece Main and Lateral Cured-in-Place Liner

D792-20 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement

D1505-18 Standard Test Method for Density of Plastics by the Density-Gradient Technique

D1603-20 Standard Test Method for Carbon Black Content in Olefin Plastics

D2321-20 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications

D1204-14(2020) Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature

D2732-14(2020) Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting

D4663-20 Standard Test Method for Polyurethane Raw Materials: Determination of Hydrolyzable Chlorine of Isocyanates

D2774-21a Standard Practice for Underground Installation of Thermoplastic Pressure Piping

F1760-16(2020) Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content

D1710-15(2021) Standard Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes

D3795-20 Standard Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer

F2619/F2619M-20 Standard Specification for High-Density Polyethylene (PE) Line Pipe

D6272-17e1 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending

D1712-09(2020) Standard Practice for Resistance of Plastics to Sulfide Staining

D7309-21b Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry

F1545-15a(2021) Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges

D790-17 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials

D2838-18 Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting

D4674-19 Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments

D5577-19 Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics

E1863-18 Standard Test Method for Analysis of Acrylonitrile by Gas Chromatography

F1533-20 Standard Specification for Deformed Polyethylene (PE) Liner

D4226-19e1 Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products

F2969-12(2020) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) IPS Dimensioned Pressure Pipe

D6474-20 Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography

F1498-08(2020) Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings

D6576-20 Standard Specification for Flexible Cellular Rubber Chemically Blown

D4662-20 Standard Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols

D3769-20 Standard Test Method for Microcellular Urethanes—High-Temperature Sag

D4441-20 Standard Specification for Aqueous Dispersions of Polytetrafluoroethylene

D5948-05(2020) Standard Specification for Molding Compounds, Thermosetting

D704-99(2020) Standard Specification for Melamine-Formaldehyde Molding Compounds

D5436-15(2020) Standard Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes

D5025-20a Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials

D5926-15(2020) Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems

D7444-18a Standard Practice for Heat and Humidity Aging of Oxidatively Degradable Plastics

D705-99(2020) Standard Specification for Urea-Formaldehyde Molding Compounds

F1025-19 Standard Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe

D7293-19 Standard Specification for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI)

D2290-19a Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe

D4976-12a(2020) Standard Specification for Polyethylene Plastics Molding and Extrusion Materials

D8280-20a Standard Test Method for Determination of the Blooming of Brominated Flame Retardants onto the Surface of Plastic Materials by Ion Chromatography

D2538-18 Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer

F2720/F2720M-20 Standard Specification for Glass Fiber Reinforced Polyethylene (PE-GF) Spiral Wound Large Diameter Pipe

D1435-20 Standard Practice for Outdoor Weathering of Plastics

D5338-15(2021) Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions, Incorporating Thermophilic Temperatures

D2396-20 Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer

D4526-20 Standard Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography

D2672-20e1 Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement

D5576-00(2021)e1 Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)

F2786-16(2021) Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Gaseous Testing Media Under Pressure (Pneumatic Leak Testing)

F585-16(2021) Standard Guide for Insertion of Flexible Polyethylene Pipe Into Existing Sewers

F667/F667M-16(2021) Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings

D3892-15(2020) Standard Practice for Packaging/Packing of Plastics

F3058-16(2021) Standard Practice for Preliminary Field Testing of Thermoplastic Pipe Joints for Gravity Flow (Non-Pressure) Sewer Lines

D4001-20 Standard Test Method for Determination of Weight-Average Molecular Weight of Polymers by Light Scattering

D4092-21 Standard Terminology for Plastics: Dynamic Mechanical Properties

F1673-10(2021)e1 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems

F3535-21 Standard Practice for Field Leak Testing of Polyamide-12 (PA12) Pressure Piping Systems Using Gaseous Testing Media Under Pressure (Pneumatic Leak Testing)

D1822-21 Standard Test Method for Determining the Tensile-Impact Resistance of Plastics

D6988-21 Standard Guide for Determination of Thickness of Plastic Film Test Specimens

D3122-21 Standard Specification for Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings

D3138-21 Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components

D5272-08(2021) Standard Practice for Outdoor Exposure Testing of Photodegradable Plastics

D5071-06(2021) Standard Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus

F3508-21a Standard Guide for In-Situ Pipeline Renovation As Dual-Wall Composite Pipeline by Push/Pull Installation of Compressed-Fit Shape-Memory-Polymer Tubular (SMPT)

D543-21 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents

D3354-21 Standard Test Method for Blocking Load of Plastic Film by the Parallel Plate Method

D7254-21 Standard Specification for Polypropylene (PP) Siding

D3935-21 Standard Classification System and Basis for Specification for Polycarbonate (PC) Unfilled and Reinforced Material

F2634-15(2021) Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method

F3525/F3525M-21 Standard Specification Fabricated Fittings of Crosslinkable Polyethylene (CX-PE)

D6248-21 Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry

F1057-21 Standard Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique

D2729-21 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings

D7210-21 Standard Practice for Extraction of Additives in Polyolefin Plastics

F2947/F2947M-21a Standard Specification for 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications

D7611/D7611M-21 Standard Practice for Coding Plastic Manufactured Articles for Resin Identification

F2306/F2306M-21 Standard Specification for 300 mm to 1500 mm [12 in. to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Non-Pressure Gravity-Flow Storm Sewer and Subsurface Drainage Applications

F2023-21 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Pipe, Tubing and Systems to Hot Chlorinated Water

F2880-21 Standard Specification for Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes 34 in. to 65 in.

D4495-21 Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight

F3497-21 Standard Test Method for Evaluating the Oxidative Resistance of Polypropylene (PP) Piping Systems to Hot Chlorinated Water

F3183-21 Standard Practice for Guided Side Bend Evaluation of Polyethylene Pipe Butt Fusion Joint

F1973-21 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems

F2487-21 Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene and Polypropylene Pipelines

F3034-21 Standard Specification for Billets made by Winding Molten Extruded Stress-Rated High Density Polyethylene (HDPE)

F3536-22 Standard Specification for PE and PP Mechanical Fittings for use on NPS 3 or Smaller Cold-water Service Polyethylene (PE) or Crosslinked Polyethylene (PEX) Pipe or Tubing

D1201-13(2022)e1 Standard Specification for Thermosetting Polyester Molding Compounds

D4364-13(2022)e1 Standard Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight

F3123-22 Standard Specification for Metric Outside Diameter Polyethylene (PE) Plastic Pipe (DR-PN)

F480-14(2022) Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80

F1429-99(2022) Standard Test Method for Assembly Force of Plastic Underground Conduit Joints That Use Flexible Elastomeric Seals Located in the Bell

F1675-13(2022) Standard Practice for Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits

F2021-17(2022) Standard Guide for Design and Installation of Plastic Siphonic Roof Drainage Systems

F2135-01(2022) Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings

F2536-17(2022) Standard Guide for Installing Plastic DWV Piping Suspended from On-Grade Slabs

F2805-16(2022) Standard Specification for Multilayer Thermoplastic And Flexible Steel Pipe And Connections

D3212-21 Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals

F3534/F3534M-22 Standard Specification for MRS-Rated Metric- and Inch-Sized Crosslinked Polyethylene (PEX) Pressure Pipe for Gas Distribution Applications

F2510/F2510M-22 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated Dual- and Triple-Wall Polyethylene and Polypropylene Pipes

D2673-14(2022) Standard Specification for Oriented Polypropylene Film

D3368-17(2022) Standard Specification for FEP Sheet and Film

D3851-17(2022) Standard Specification for Microcellular Polyurethane Shoe Soling Materials

D4068-17(2022) Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane

D6436-14(2022) Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers

D3768-22 Standard Test Method for Microcellular Urethanes—Flexural Recovery

D7253-22 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols

D4591-22 Standard Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry

D6437-22 Standard Test Method for Polyurethane Raw Materials: Alkalinity in Low-Alkalinity Polyols (Determination of CPR Values of Polyols)

D1430-22 Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics

D2843-22 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics

D3675-22 Standard Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source

D731-22 Standard Test Method for Molding Index of Thermosetting Molding Powder

D3159-22 Standard Specification for Modified ETFE Fluoropolymer Molding and Extrusion Materials

F3378/F3378M-22 Standard Specification for Crosslinkable Polyethylene (CX-PE) Pipe

D6662-22 Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards

F1802-22 Standard Test Method for Performance Testing of Excess Flow Valves

F2435-22 Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe

D4812-19e1 Standard Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics

F3564-22 Standard Practice for Determining Allowable Tensile Load for Polyamide-12 (PA12) Gas Pipe During Pull-In Installation

F3371-22 Standard Specification for Polyolefin Pipe and Fittings for Drainage, Waste, and Vent Applications

D4969-17(2022) Standard Specification for Polytetrafluoroethylene–(PTFE) Coated Glass Fabric

D5491-08(2022) Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials

D3308-12(2022) Standard Specification for PTFE Resin Skived Tape

D3567-17(2022) Standard Practice for Determining Dimensions of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings

D6585-17(2022) Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape

D7193-17(2022) Standard Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape

F1668-16(2022) Standard Guide for Construction Procedures for Buried Plastic Pipe

D2857-22 Standard Practice for Dilute Solution Viscosity of Polymers

D3291-22 Standard Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression

D4216-22 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds

D4986-22 Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials

D5260-22 Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds

D7991-22 Standard Test Method for Determining Aerobic Biodegradation of Plastics Buried in Sandy Marine Sediment under Controlled Laboratory Conditions

D1042-22 Standard Test Method for Linear Dimensional Changes of Plastics Caused by Exposure to Heat and Moisture

D1667-22 Standard Specification for Flexible Cellular Materials—Poly (Vinyl Chloride) Foam (Closed-Cell)

D4670-17(2022)e1 Standard Test Method for Polyurethane Raw Materials: Determination of Suspended Matter in Polyols

D5208-14(2022) Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics

D6261-14(2022) Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)

D7083-16(2022) Standard Practice for Determination of Monomeric Plasticizers in Poly (Vinyl Chloride) (PVC) by Gas Chromatography

D6342-22 Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy

D7252-22 Standard Test Method for Polyurethane Raw Materials: Determination of Monomer and Isomers in Isocyanates

D635-22 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position

D6783-05a(2022) Standard Specification for Polymer Concrete Pipe

D7774-22 Standard Test Method for Flexural Fatigue Properties of Plastics

D7791-22 Standard Test Method for Uniaxial Fatigue Properties of Plastics

D638-22 Standard Test Method for Tensile Properties of Plastics

D3294-22 Standard Specification for Polytetrafluoroethylene (PTFE) Resin Molded Sheet and Molded Basic Shapes

D4024-22 Standard Specification for Machine Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges

D4349-22 Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials

D5870-22 Standard Practice for Calculating Property Retention Index of Plastics

D2235-22 Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings

D3485-22 Standard Specification for Coilable High Density Polyethylene (HDPE) Cable in Conduit (CIC)

D2115-22 Standard Practice for Oven Heat Stability of Poly(Vinyl Chloride) Compositions

D5672/D5672M-22 Standard Test Method for Testing Flexible Cellular Materials Measurement of Indentation Force Deflection Using a 25-mm [1-in.] Deflection Technique

F1504-21e1 Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation

D2749-22 Standard Symbols for Dimensions of Plastic Pipe Fittings

D2122-22 Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings

D4634-16(2022) Standard Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)

F409-22 Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings

F1499-22 Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)

F1901-22 Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems

D5225-22 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer

D542-22 Standard Test Method for Index of Refraction of Transparent Organic Plastics

D1239-22a Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals

D1562-22 Standard Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds (CAP)

D1593-22 Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting

D3591-22 Standard Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in Formulated Compounds

D4396-22 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications

D4551-22 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane

F2160-22a Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)

F3541-22 Standard Practice for Sectional Repair of Existing Gravity Flow, Non-Pressure Pipelines and Conduits by Pushed or Pulled-In-Place Installation of Cured-In-Place Thermosetting Resin Pipe (CIPP)

D8033-22 Standard Classification System for Poly(Ether Ether Ketone) (PEEK) Molding and Extrusion Materials

D2238-22 Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm⁻¹

D5336-22 Standard Classification System and Basis for Specification for Polyphthalamide (PPA) Injection Molding Materials

F3097-22 Standard Practice for Installation of an Outside Sewer Service Cleanout through a Minimally Invasive Small Bore Vacuum Excavation and Same Day Restoration

F1056-18(2022) Standard Specification for Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe or Tubing and Fittings

D570-22 Standard Test Method for Water Absorption of Plastics

F2994-18(2022) Standard Practice for Utilization of Mobile, Automated Cured-In-Place Pipe (CIPP) Impregnation Systems

D8349-21 Standard Classification System for and Basis of Specifications for Thermoplastic Joining Interface Materials for Creation of Joints Between Different Materials for the Production of End Items or Parts that are Intended to be Disassembled and/or Reassemb

D3311-22 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns

F493-22 Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings

C1147-14(2022) Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics

D5630-22 Standard Test Method for Ash Content in Plastics

F905-04(2022) Standard Practice for Qualification of Polyethylene Saddle-Fused Joints

D4350-16(2022) Standard Test Method for Corrosivity Index of Plastics and Fillers

D5045-14(2022) Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials

F1055-16a(2022) Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing

D1494-22 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels

D2291/D2291M-22 Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites

D5204-22 Standard Classification System and Basis for Specification for Polyamide-Imide (PAI) Molding and Extrusion Materials

D5319-22 Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels

D2239-22 Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter

D2737-22 Standard Specification for Polyethylene (PE) Plastic Tubing

D3035-22 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter

D7486-22 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis

F1741-22 Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits

F1867-22 Standard Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation

F2019-22 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic Cured-in-Place (GRP-CIPP) Using the UV-Light Curing Method

F2599-22 Standard Practice for Sectional Repair of Damaged Pipe By Means of an Inverted Cured-In-Place Liner

F1962-22 Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings

D4093-23 Standard Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials

F2261-06(2023) Standard Test Method for Pressure Rating Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 and 80 Socket-Type

F2928-18(2023) Standard Practice for Specimens and Testing Conditions for Testing Polyethylene (PE) Pipe Butt Fusions Using Tensile and Hydrostatic Test Methods

D3916-22 Standard Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod

D4673-23 Standard Classification System for and Basis for Specification for Acrylonitrile–Butadiene–Styrene (ABS) Plastics and Alloys Molding and Extrusion Materials

F2080-23 Standard Specification for Cold-Expansion Fittings with Metal Compression-Sleeves for Crosslinked Polyethylene (PEX) Pipe and SDR9 Polyethylene of Raised Temperature (PE-RT) Pipe

F1807-23 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps, for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing

F3347-23 Standard Specification for Metal Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing

D2657-07(2023) Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings

F1483-23 Standard Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe

F2806-23 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)

D2578-23 Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films

F1412-22 Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems

F3182-23 Standard Practice for the Application of Spray-Applied Polymeric Liners Inside Pipelines for Potable Water

D4067-23 Standard Classification System and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods

D4661-23 Standard Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine in Isocyanates

D4804-23 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics

D5629-23 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers

D6400-23 Standard Specification for Labeling of Plastics Designed to be Aerobically Composted in Municipal or Industrial Facilities

D7258-23 Standard Specification for Polymeric Piles

D7568-23 Standard Specification for Polyethylene-Based Structural-Grade Plastic Lumber for Outdoor Applications

D7711-23 Standard Guide for Description of Polymer Pellet Defects

F3597-23 Standard Specification for MRS-Rated Metric- and Inch-sized Crosslinked Polyethylene (PEX) Pressure Pipe for Oil and Gas Producing Applications

F2159-23a Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring, or Alternate Stainless Steel Clamps for SDR9 Crosslinked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing

D4273-23 Standard Test Method for Polyurethane Raw Materials: Determination of Primary Hydroxyl Content of Polyether Polyols

D5991-23 Standard Practice for Separation and Identification of Poly(Vinyl Chloride) (PVC) Contamination in Poly(Ethylene Terephthalate) (PET) Flake

D6263-23 Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)

D6265-23 Standard Practice for Separation of Contaminants in Polymers Using an Extruder Filter Test

D6288-23 Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing

F2145-23 Standard Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing

D707-15(2023) Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds (CAB)

D2839-16(2023) Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene

D5575-18(2023) Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers

D4274-23 Standard Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of Polyols

D4660-23 Standard Test Methods for Polyurethane Raw Materials: Determination of the Isomer Content of Toluenediisocyanate

D5138-23 Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP)

D6779-23 Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)

D4000-23 Standard Classification System for Specifying Plastic Materials

F2649-14(2023) Standard Specification for Corrugated High Density Polyethylene (HDPE) Grease Interceptor Tanks

F441/F441M-23 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80

F442/F442M-23 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)

F1866-23 Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings

F2735-23 Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing

F3348-23a Standard Specification for Plastic Press Insert Fittings with Factory Assembled Stainless Steel Press Sleeve for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing

C582-23 Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment

D785-23 Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials

F1365-91(2023) Standard Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints Which Use Flexible Elastomeric Seals

D8133-23 Standard Test Method for Determination of Low Level Phthalates in Poly(Vinyl Chloride) Plastics by Solvent Extraction—Gas Chromatography/Mass Spectrometry

F3128-23 Standard Specification for Poly(Vinyl Chloride) (PVC) Schedule 40 Drain, Waste, and Vent Pipe with a Cellular Core

F3524/F3524M-23 Standard Specification for Polyamide-12 (PA12) Line Pipe

D1922-23 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method

D4878-23 Standard Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols

D5421-23 Standard Specification for Contact Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges

D7211-23 Standard Specification for Parts Machined from Polychlorotrifluoroethylene (PCTFE) and Intended for General Use

F2648/F2648M-23 Standard Specification for 50 mm to 1500 mm [2 in. to 60 in.] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications

D8484-23 Standard Specification for Plastic Lumber Materials and Wood-Plastic Composite Materials Used as Exterior Wall Coverings

D1621-16(2023) Standard Test Method for Compressive Properties of Rigid Cellular Plastics

D1623-17(2023) Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics

D3275-18(2023) Standard Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials

D4895-18(2023) Standard Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion

D1929-23 Standard Test Method for Determining Ignition Temperature of Plastics

D3030-23 Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins

F438-23 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40

D3681-23 Standard Test Method for Chemical Resistance of “Fiberglass” (Glass–Fiber–Reinforced Thermosetting-Resin) Pipe in a Deflected Condition

D5365-23 Standard Test Method for Long-Term Ring-Bending Strain of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

D1746-23 Standard Test Method for Transparency of Plastic Sheeting

F1974-23 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe

F1282-23a Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe

F758-14(2023) Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage

F2207-06(2023) Standard Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe

F2817-13(2023) Standard Specification for Poly (Vinyl Chloride) (PVC) Gas Pressure Pipe and Fittings For Maintenance or Repair

F2818-10(2023) Standard Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing

F3181-16(2023) Standard Test Method for The Un-notched, Constant Ligament Stress Crack Test (UCLS) for HDPE Materials Containing Post- Consumer Recycled HDPE

F3203-19(2023) Standard Test Method for Determination of Gel Content of Crosslinked Polyethylene (PEX) Pipes and Tubing

D2343-17(2023) Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics

D6041-23 Standard Specification for Contact-Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings

D695-23 Standard Test Method for Compressive Properties of Rigid Plastics

D3489-23 Standard Test Methods for Microcellular Urethane Materials

D6262-23 Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK)

D6835-23 Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)

F2896-23 Standard Specification for Reinforced Polyethylene Composite Pipe For The Transport Of Oil And Gas And Hazardous Liquids

D2463-23 Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers

D4272/D4272M-23 Standard Test Method for Total Energy Impact of Plastic Films by Dart Drop

F3565-23 Standard Practice for Electrofusion Joining Polyethylene (PE) Pipe and Fittings for Pressure Pipe Service

D2464-23 Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80

F2418-23 Standard Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers

D2517-18(2023) Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings

D5677-17(2023) Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines

D2863-23 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)

D2996-23 Standard Specification for Filament-Wound “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

D2565-23 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications

D1243-22e1 Standard Test Method for Dilute Solution Viscosity of Vinyl Chloride Polymers

F2897-23a Standard Specification for Tracking and Traceability Encoding System of Natural Gas Distribution Components (Pipe, Tubing, Fittings, Valves, and Appurtenances)

D5047-17(2023) Standard Specification for Polyethylene Terephthalate Film and Sheeting

D5508-23 Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)

D5675-13(2023) Standard Classification for Low Molecular Weight PTFE and FEP Micronized Powders

D8065/D8065M-16(2023) Standard Classification System and Basis for Specification for Specifying Plastic Films

D6040-18(2023) Standard Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape

D2152-23 Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion

D2561-17(2023) Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers

D2659-16(2023) Standard Test Method for Column Crush Properties of Blown Thermoplastic Containers

D2911/D2911M-16(2023) Standard Specification for Dimensions and Tolerances for Plastic Bottles

D4204-16(2023) Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study

D4397-16(2023) Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications

F2600-09(2023) Standard Specification for Electrofusion Type Polyamide-11 Fittings for Outside Diameter Controlled Polyamide-11 Pipe and Tubing

F3308/F3308M-19(2023) Standard Practice for Sampling and Testing Frequency for Recycled Materials in Polyethylene (PE) Pipe for Non-Pressure Applications

F3124-23a Standard Practice for Data Recording the Procedure used to Produce Heat Butt Fusion Joints in Plastic Piping Systems or Fittings

F2945-18(2023) Standard Specification for Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings

F1563-23 Standard Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing

D2734-23 Standard Test Methods for Void Content of Reinforced Plastics

D4440-23 Standard Test Method for Plastics: Dynamic Mechanical Properties Melt Rheology

D5023-23 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)

D5026-23 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension

D5418-23 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam)

D5814-23 Standard Practice for Determination of Contamination in Recycled Poly(Ethylene Terephthalate) (PET) Flakes and Chips Using a Plaque Test

D8501-23a Standard Classification System for and Basis for Specification for Unfilled Poly(Ether Ketone Ketone) (PEKK) Materials for Molding, Extrusion, Composites, Powder Coating and Additive Manufacturing

D1203-23 Standard Test Methods for Volatile Loss from Plastics Using Activated Carbon Methods

D3763-23 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors

D3917-23 Standard Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes

D5024-23 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Compression

D6112-23 Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes

D8540-23 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position Using a Dry Bath

D1238-23a Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer

D8539-23 Standard Guide for Measurement of Polyolefin Properties Using TD-NMR Relaxometry

F2986-23 Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Leachate, Heap Leach Aeration and Other Mining Applications

D8019-23 Standard Test Methods for Determining the Full Section Flexural Modulus and Bending Strength of Fiber Reinforced Polymer Crossarms Assembled with Center Mount Brackets

F3240-19(2023) Standard Practice for Installation of Seamless Molded Hydrophilic Gaskets (SMHG) for Long-Term Watertightness of Cured-in-Place Rehabilitation of Main and Lateral Pipelines

D2103-23a Standard Specification for Polyethylene Film

D6042-23 Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC)

D6954-24 Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation

D7792/D7792M-23 Standard Practice for Freeze/Thaw Conditioning of Pultruded Fiber Reinforced Polymer (FRP) Composites Used in Structural Designs

D7992/D7992M-23 Standard Practice for Elevated Temperature and Moisture Conditioning of Pultruded Fiber Reinforced Polymer (FRP) Composites Used in Structural Designs

F512-19(2024) Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation

D5857-17(2024) Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology

F714-24 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter

F877-24 Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems

D5492-17(2024) Standard Test Method for Determination of Xylene Solubles in Propylene Plastics

F1733-24 Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing

F2769-24 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems

F3253-24 Standard Specification for Crosslinked Polyethylene (PEX) Tubing with Oxygen Barrier for Hot- and Cold-Water Hydronic Distribution Systems

F1871-24 Standard Specification for Folded/Formed Poly-(Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation

F2136-18(2024) Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe

F2231-02(2024) Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes

F2855-19(2024) Standard Specification for Chlorinated Poly(Vinyl Chloride)/Aluminum/Chlorinated Poly(Vinyl Chloride) (CPVC-AL-CPVC) Composite Pressure Tubing

D1043-16(2024) Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test

D2647-18(2024) Standard Specification for Crosslinkable Ethylene Plastics

D2765-16(2024) Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics

F1281-24 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe

D2924-24 Standard Test Method for External Pressure Resistance of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

D4803-24 Standard Test Method for Predicting Heat Buildup in PVC Building Products

D4875-24 Standard Test Methods of Polyurethane Raw Materials: Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols

D6979-24 Standard Test Method for Polyurethane Raw Materials: Determination of Basicity in Polyols, Expressed as Percent Nitrogen

D7436-17(2024) Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology

D7487-24 Standard Practice for Polyurethane Raw Materials: Polyurethane Foam Cup Test

F3346-24 Standard Specification for Polyethylene of Raised Temperature/Aluminum/Polyethylene of Raised Temperature (PE-RT/AL/PE-RT) Composite Pressure Pipe

D4669-24 Standard Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols

D4672-24 Standard Test Method for Polyurethane Raw Materials: Determination of Water Content of Polyols

D6099-24 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates

D6108-24 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes

D6109-24 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products

D6111-24 Standard Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement

F2562/F2562M-24 Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage

F894-24 Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe

F2623-24e1 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Systems for Non-Potable Water Applications

D4101-24 Standard Classification System and Basis for Specification for Polypropylene Injection and Extrusion Materials

D3261-24 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing

D3981-09a(2024)e1 Standard Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications

F437-24 Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80

D2846/D2846M-24 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems

F439-24 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80

F2618-24 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems

D2241-24 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)

D2665-24 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

F2831-19(2024) Standard Practice for Internal Non Structural Epoxy Barrier Coating Material Used In Rehabilitation of Metallic Pressurized Piping Systems

F891-24 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core

F1697-24 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit

F2509-24 Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene and Polyamide-11 (PA11) Gas Distribution Pipe and Tubing

D4726-24 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors

D5205-24 Standard Classification System and Basis for Specification for Polyetherimide (PEI) Molding and Extrusion Materials

D5364-14(2024) Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced (FRP) Plastic Chimney Liners with Coal-Fired Units

D3296-24 Standard Specification for FEP Resin Tube

D4477-24 Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit

D5594-18a(2024) Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)

D6150-24 Standard Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility

D7194-19(2024) Standard Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE)

D7471-19(2024) Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials

D7472-19(2024) Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials

D1823-24 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer

D1824-24 Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates

D3679-24 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding

D5206-24 Standard Test Method for Windload Resistance of Rigid Plastic Siding

D7793-24 Standard Specification for Insulated Vinyl Siding

D2609-24 Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe

F1732-24 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material

F2658-24 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings

F1734-24 Standard Practice for Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe

D7445-24 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding)

D3034-24 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings

D4745-19(2024) Standard Classification System and Basis for Specification for Filled Polytetrafluoroethlyene (PTFE) Molding and Extrusion Materials Using ASTM Methods

D4894-19(2024) Standard Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials

D5947-24 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens

D6713-24 Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF)

D7191-24 Standard Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor

D4321-24 Standard Test Method for Package Yield of Plastic Film

D2992-24 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings

D3517-24 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe

F3556-24 Standard Specification for Physical Properties of Polyethylene Corrugated Gravity Flow (non-pressure) Pipe and Fittings with Recycled Content

F810-12(2024) Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields

D746-24 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact

D1044-24 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion by the Taber Abraser

D2684/D2684M-24 Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products

D6691-24a Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium or Natural Sea Water Inoculum

F2206-19(2024) Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE)

F2138-12(2024) Standard Specification for Excess Flow Valves for Natural Gas Service

F2165-24 Standard Specification for Flexible Pre-Insulated Plastic Piping

F2764/F2764M-24 Standard Specification for 6 in. to 60 in. [150 mm to 1500 mm] Polypropylene (PP) Corrugated Double and Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications

F3202-24 Standard Specification for Solid Wall Poly (Vinyl Chloride) PVC Fittings for Joining Corrugated Wall High Density Polyethylene (PE) and Polypropylene (PP) Piping

D2837-24 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products

D2466-24 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40

D2467-24 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80

F2620-24 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings

D2661-24 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings

F2389-24a Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems

F1759-97(2024) Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications

D6247-18(2024) Standard Test Method for Determination of Elemental Content of Polyolefins by Wavelength Dispersive X-ray Fluorescence Spectrometry

D2949-24 Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

F2767-24 Standard Specification for Electrofusion Type Polyamide-12 Fittings for Outside Diameter Controlled Polyamide-12 Pipe and Tubing for Gas Distribution

D696-24 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and +30°C with a Vitreous Silica Dilatometer

D732-24 Standard Test Method for Shear Strength of Plastics by Punch Tool

D3754-24 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe

D3840-24 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications

D4161-24 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals

D4890-24 Standard Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA (Platinum-Cobalt) Color of Polyols

D3350-24 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials

D3835-24 Standard Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer

F3533/F3533M-24 Standard Guide for Inspection and Acceptance of Installed Thermoplastic Storm and Sanitary Sewer Pipe

D2583-24 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor

F2788/F2788M-24 Standard Specification for Metric and Inch-sized Crosslinked Polyethylene (PEX) Pipe

D3676-18(2024) Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay

D1599-18(2024) Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings

F1960-24 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing

D2564-20(2024) Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems

D2855-20(2024) Standard Practice for the Two-Step (Primer and Solvent Cement) Method of Joining Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Piping Components with Tapered Sockets

F3390-20(2024) Standard Specification for 3 through 24 in. Lined Flexible Corrugated Polyethylene Pipe for Land Drainage Applications

D3641-24 Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials

D5017-24 Standard Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance

D5628-24 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)

D1895-24 Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials

D2925-24 Standard Test Method for Beam Deflection of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow

F2905/F2905M-24a Standard Specification for Crosslinked Polyethylene (PEX) Line Pipe For Oil and Gas Producing Applications

F2968/F2968M-24 Standard Specification for Crosslinked Polyethylene (PEX) Pipe for Gas Distribution Applications

D1709-24 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method

F3328-18(2024) Standard Practice for the One-Step (Solvent Cement Only) Method of Joining Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Piping Components with Tapered Sockets

F3288/F3288M-24 Standard Specification for MRS-Rated Metric- and Inch-sized Crosslinked Polyethylene (PEX) Pressure Pipe

F3506-24 Standard Specification for Polyethylene of Raised Temperature/Aluminum/Polyethylene of Raised Temperature (PE-RT/AL/PE-RT) Composite Pressure Pipe based on Inner Diameter (ID) for use in Air Conditioning and Refrigeration Line Set Systems

F725-03(2024) Standard Practice for Drafting Impact Test Requirements In Thermoplastic Pipe And Fittings Standards

F2098-24 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) to Metal Insert and Plastic Insert Fittings

F3722-24 Standard Practice for Heat Fusion Joining of Polypropylene (PP) Pipe and Fittings

F449-20(2024) Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control

F412-24a Standard Terminology Relating to Plastic Piping Systems

F1216-24a Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube

F1743-24 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)

F876-24b Standard Specification for Crosslinked Polyethylene (PEX) Tubing

F1417-11a(2024) Standard Practice for Installation Acceptance of Plastic Non-pressure Sewer Lines Using Low-Pressure Air

F628-24 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core

F1488-24 Standard Specification for Coextruded Composite Pipe

F1970-24 Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems

D1894-24 Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting

D4802-16(2024) Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet

F3219-24 Standard Specification for 3 in. to 30 in. (75 mm to 750 mm) Polypropylene (PP) Corrugated Single Wall Pipe and Fittings

D3299-24 Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks

D4877-24 Standard Test Method for Polyurethane Raw Materials: Determination of APHA (Platinum-Cobalt) Color of Isocyanates

D5998-24 Standard Specification for Molded Polyethylene Shipping and Storage Drums

D6117-24 Standard Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes

D256-24 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics

D4703-24 Standard Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets

D5927-24 Standard Classification System for andBasis for Specifications for Thermoplastic Polyester (TPES) Molding and Extrusion Materials Based on ISO Test Methods

D6866-24a Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis

D1598-24 Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure

F1473-24a Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins

F3687-24 Standard Specification for Pressure-Rated Polyvinylidene Fluoride (PVDF) Piping Systems

D4801-08(2025) Standard Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater

D788-24 Standard Classification System for and Basis of Specification for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Materials

D5946-24 Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements

D8136-24 Standard Test Method for Determining Plastic Film Thickness and Thickness Variability Using a Non-Contact Capacitance Thickness Gauge

D883-25 Standard Terminology Relating to Plastics

D2105-25 Standard Test Method for Longitudinal Tensile Properties of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube

D2513-24e1 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings

D5988-18(2025) Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in Soil