ASTM Volume 5, 2022

Table of Contents

D7833-20 Standard Test Method for Determination of Hydrocarbons and Non-Hydrocarbon Gases in Gaseous Mixtures by Gas Chromatography

D975-21 Standard Specification for Diesel Fuel

D7720-21 Standard Guide for Statistically Evaluating Measurand Alarm Limits when Using Oil Analysis to Monitor Equipment and Oil for Fitness and Contamination

D3244-21a Standard Practice for Utilization of Test Data to Determine Conformance with Specifications

D7484-21b Standard Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine

D5502-21 Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry

D5797-21 Standard Specification for Methanol Fuel Blends (M51–M85) for Methanol-Capable Automotive Spark-Ignition Engines

D4806-21a Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel

D5800-21 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method

D5798-21 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines

D6217-21 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration

D8076-21b Standard Specification for 100 Research Octane Number Test Fuel for Automotive Spark-Ignition Engines

D6349-21 Standard Test Method for Determination of Major and Minor Elements in Coal, Coke, and Solid Residues from Combustion of Coal and Coke by Inductively Coupled Plasma—Atomic Emission Spectrometry

D3172-13(2021)e1 Standard Practice for Proximate Analysis of Coal and Coke

D7577-12(2021) Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends

D5006-11(2021) Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels

D2068-20 Standard Test Method for Determining Filter Blocking Tendency

D5705-20 Standard Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils

D8353-20 Standard Guide for Determination of Individual Particle Strength of Low Surface Area Catalysts and Catalyst Carriers by Drop Test onto a Steel Plate

D7740-20 Standard Practice for Optimization, Calibration, and Validation of Atomic Absorption Spectrometry for Metal Analysis of Petroleum Products and Lubricants

D6821-20a Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer

D5372-20 Standard Guide for Evaluation of Hydrocarbon Heat Transfer Fluids

D8316-20a Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils with the Roller-Disk Geometry Using SRV Test Machine

D7875-20 Standard Test Method for Determination of Butanol and Acetone Content of Butanol for Blending with Gasoline by Gas Chromatography

D7974-21 Standard Test Method for Determination of Farnesane, Saturated Hydrocarbons, and Hexahydrofarnesol Content of Synthesized Iso-Paraffins (SIP) Fuel for Blending with Jet Fuel by Gas Chromatography

D6469-20 Standard Guide for Microbial Contamination in Fuels and Fuel Systems

D8339-20 Standard Test Method for The Analysis of Flue Gas Desulfurization Solids by Macro Thermogravimetric Analysis

D4049-20 Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray

D8278-20 Standard Specification for Digital Contact Thermometers for Test Methods Measuring Flow Properties of Fuels and Lubricants

D291/D291M-20 Standard Test Method for Bulk Density of Crushed Bituminous Coal

D1403-20b Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment

D4927-20 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy

D7342-20 Standard Test Method for Prolonged Worked Stability of Lubricating Grease in Presence of Water (Water Stability Test)

D3336-20b Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures

D3603-20 Standard Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method)

D8352-20 Standard Test Method for Determination of Relative Crystallinity of Zeolite Beta by X-Ray Diffraction

D1092-20 Standard Test Method for Measuring Apparent Viscosity of Lubricating Greases

D8253-21 Standard Test Method for Determination of the Asphaltene Solvency Properties of Bitumen, Crude Oil, Condensate and/or Related Products for the Purpose of Calculating Stability, Compatibility for Blending, Fouling, and Processibility (Manual Microscopy

D6729-20 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Metre Capillary High Resolution Gas Chromatography

D8274-20a Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil by Portable Rapid Mid-Infrared Analyzer

D3829-20a Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil

D5671-20 Standard Practice for Polishing and Etching Coal Samples for Microscopical Analysis by Reflected Light

D8022-20 Standard Test Method for Roll Stability of Lubricating Grease in Presence of Water (Wet Roll Stability Test)

D7920-21 Standard Test Method for Determination of Fuel Methanol (M99) and Methanol Fuel Blends (M10 to M99) by Gas Chromatography

D6743-20 Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids

D7798-20 Standard Test Method for Boiling Range Distribution of Petroleum Distillates with Final Boiling Points up to 538 °C by Ultra Fast Gas Chromatography (UF GC)

D8302-20 Standard Test Method for Determination of Cycloparaffin Content in Saturated ATJ-SPK Jet Fuel Gas Chromatography

D4741-21 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer

D4926-20 Standard Test Method for Gamma Alumina Content in Catalysts and Catalyst Carriers Containing Silica and Alumina by X-ray Powder Diffraction

D6273-20 Standard Test Method for Natural Gas Odor Intensity

D2625-20 Standard Test Method for Endurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants (Falex Pin and Vee Method)

D7806-20 Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Ester) and Triglyceride Content in Diesel Fuel Oil Using Mid-Infrared Spectroscopy (FTIR Transmission Method)

D8356-20 Standard Test Method for Sonic Velocity in Manufactured Carbons and Graphite Materials for use in Obtaining Approximate Elastic Constants: Young’s Modulus, Shear Modulus, and Poisson’s Ratio

D6616-21 Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100 °C

D8056-18 Standard Guide for Elemental Analysis of Crude Oil

D2511-20 Standard Test Method for Thermal Shock Sensitivity of Solid Film Lubricants

D7779-20 Standard Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature

D7483-21 Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer

D7669-20 Standard Guide for Practical Lubricant Condition Data Trend Analysis

D3525-20 Standard Test Method for Gasoline Fuel Dilution in Used Gasoline Engine Oils by Wide-Bore Capillary Gas Chromatography

D5273-18 Standard Guide for Analysis of Propylene Concentrates

D8185-18 Standard Guide for In-Service Lubricant Viscosity Measurement

D5758-01(2021) Standard Test Method for Determination of Relative Crystallinity of Zeolite ZSM-5 by X-Ray Diffraction

D5662-19a Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers

D4567-19 Standard Test Method for Single-Point Determination of Specific Surface Area of Catalysts and Catalyst Carriers Using Nitrogen Adsorption by Continuous Flow Method

D8186-18 Standard Test Method for Measurement of Impurities in Graphite by Electrothermal Vaporization Inductively Coupled Plasma Optical Emission Spectrometry (ETV-ICP OES)

D7156-19 Standard Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine

D7973-19 Standard Guide for Monitoring Failure Mode Progression in Plain Bearings

D8230-19 Standard Test Method for Measurement of Volatile Silicon-Containing Compounds in a Gaseous Fuel Sample Using Gas Chromatography with Spectroscopic Detection

D7941/D7941M-14 Standard Test Method for Hydrogen Purity Analysis Using a Continuous Wave Cavity Ring-Down Spectroscopy Analyzer

D388-19a Standard Classification of Coals by Rank

D4950-19 Standard Classification and Specification for Automotive Service Greases

D2421-21e1 Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis

D6796-21e1 Standard Practice for Production of Coal, Coke and Coal Combustion Samples for Interlaboratory Studies

D7689-21 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Mini Method)

D5187-21 Standard Test Method for Determination of Crystallite Size (Lc) of Calcined Petroleum Coke by X-Ray Diffraction

D2161-20 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity

D7683-21 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Small Test Jar Method)

D2638-21 Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer

D7397-21 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Miniaturized Optical Method)

D8324-21 Standard Guide for Selection of Environmentally Acceptable Lubricants for the U.S. Environmental Protection Agency (EPA) Vessel General Permit

D1480-21 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer

D7960-21 Standard Specification for Unleaded Aviation Gasoline Test Fuel Containing Non-hydrocarbon Components

D6617-21 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material

D8049-21 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Analyzer

D8386-21 Standard Test Method for Determining Enhanced Filter Blocking Tendency (EFBT)

D2619-21 Standard Test Method for Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method)

D8070-21 Standard Test Method for Screening of Fuels and Fuel Associated Aqueous Specimens for Microbial Contamination by Lateral Flow Immunoassay

D7962-21 Standard Practice for Determination of Minimum Immersion Depth and Assessment of Temperature Sensor Measurement Drift

D7314-21 Standard Practice for Determination of the Heating Value of Gaseous Fuels using Calorimetry and On-line/At-line Sampling

D8080-21 Standard Specification for Compressed Natural Gas (CNG) and Liquefied Natural Gas (LNG) Used as a Motor Vehicle Fuel

D7164-21 Standard Practice for On-line/At-line Heating Value Determination of Gaseous Fuels by Gas Chromatography

D167/D167M-21a Standard Test Method for Apparent and True Specific Gravity and Porosity of Lump Coke

D7547-21 Standard Specification for Hydrocarbon Unleaded Aviation Gasoline

D8383-21 Standard Test Method for Methyl Hydrogen Content of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy

D7862-21 Standard Specification for Butanol for Blending with Gasoline for Use as Automotive Spark-Ignition Engine Fuel

D7463-21 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water

C695-21 Standard Test Method for Compressive Strength of Carbon and Graphite

D3943-21 Standard Test Method for Total Molybdenum in Fresh Alumina-Base Catalysts

C611-21 Standard Test Method for Electrical Resistivity of Manufactured Carbon and Graphite Articles at Room Temperature

D6730-21 Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100-Metre Capillary (with Precolumn) High-Resolution Gas Chromatography

D7794-21 Standard Practice for Blending Mid-Level Ethanol Fuel Blends for Flexible-Fuel Vehicles with Automotive Spark-Ignition Engines

D8369-21 Standard Test Method for Detailed Hydrocarbon Analysis by High Resolution Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy (GC-VUV)

D2798-21 Standard Test Method for Microscopical Determination of the Vitrinite Reflectance of Coal

D7843-21 Standard Test Method for Measurement of Lubricant Generated Insoluble Color Bodies in In-Service Turbine Oils using Membrane Patch Colorimetry

D5373-21 Standard Test Methods for Determination of Carbon, Hydrogen and Nitrogen in Analysis Samples of Coal and Carbon in Analysis Samples of Coal and Coke

D7687-21 Standard Test Method for Measurement of Cellular Adenosine Triphosphate in Fuel and Fuel-associated Water With Sample Concentration by Filtration

D7800/D7800M-14 Standard Test Method for Determination of Elemental Sulfur in Natural Gas

D910-21 Standard Specification for Leaded Aviation Gasolines

D7569/D7569M-10(2015)e1 Standard Practice for Determination of Gas Content of Coal—Direct Desorption Method

D6721-01(2015) Standard Test Method for Determination of Chlorine in Coal by Oxidative Hydrolysis Microcoulometry

D3180-15 Standard Practice for Calculating Coal and Coke Analyses from As-Determined to Different Bases

D3176-15 Standard Practice for Ultimate Analysis of Coal and Coke

D7165-10(2015) Standard Practice for Gas Chromatograph Based On-line/At-line Analysis for Sulfur Content of Gaseous Fuels

D6968-03(2015) Standard Test Method for Simultaneous Measurement of Sulfur Compounds and Minor Hydrocarbons in Natural Gas and Gaseous Fuels by Gas Chromatography and Atomic Emission Detection

D7166-10(2015) Standard Practice for Total Sulfur Analyzer Based On-line/At-line for Sulfur Content of Gaseous Fuels

D8211-21 Standard Test Method for Hot Surface Ignition Temperature of Gases on Flat Surface

D2425-21 Standard Test Method for Hydrocarbon Types in Middle Distillates by Mass Spectrometry

D3944-12(2017) Standard Test Method for Solidification Point of Petroleum Wax

D6549-06(2021) Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)

D4481-21 Standard Test Method for Total Nickel in Fresh Alumina-Base Catalysts

D2893-19 Standard Test Methods for Oxidation Characteristics of Extreme-Pressure Lubrication Oils

D4290-20 Standard Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions

D7430/D7430M-21 Standard Practice for Mechanical Sampling of Coal

D4425-19 Standard Test Method for Oil Separation from Lubricating Grease by Centrifuging (Koppers Method)

D121-15 Standard Terminology of Coal and Coke

D7527-10(2018) Standard Test Method for Measurement of Antioxidant Content in Lubricating Greases by Linear Sweep Voltammetry

D5706-16 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

D6733-01(2020) Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography

D7551-10(2015) Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases and Natural Gas by Ultraviolet Fluorescence

D7217-16 Standard Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

D8094-21 Standard Test Method for Determination of Water Content of Liquefied Petroleum Gases (LPG) Using an Online Electronic Moisture Analyzer

D4485-20 Standard Specification for Performance of Active API Service Category Engine Oils

D2156-09(2018) Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels

D3705-14(2019) Standard Test Method for Misting Properties of Lubricating Fluids

D7419-18 Standard Test Method for Determination of Total Aromatics and Total Saturates in Lube Basestocks by High Performance Liquid Chromatography (HPLC) with Refractive Index Detection

D8164-21 Standard Guide for Digital Contact Thermometers for Petroleum Products, Liquid Fuels, and Lubricant Testing

D6425-19 Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine

D7524-20 Standard Test Method for Determination of Static Dissipater Additives (SDA) in Aviation Turbine Fuel and Middle Distillate Fuels—High Performance Liquid Chromatograph (HPLC) Method

D4782-10(2016) Standard Test Method for Palladium in Molecular Sieve Catalyst by Wet Chemistry

D5059-21 Standard Test Methods for Lead and Manganese in Gasoline by X-Ray Fluorescence Spectroscopy

D7861-14(2019) Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Diesel Fuel by Linear Variable Filter (LVF) Array Based Mid-Infrared Spectroscopy

D2670-20 Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method)

D5707-19 Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

D7594-19 Standard Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian Contact Pressures Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

D7872-13(2018) Standard Test Method for Determining the Concentration of Pipeline Drag Reducer Additive in Aviation Turbine Fuels

D4616-95(2018) Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch

D7549-21 Standard Test Method for Evaluation of Heavy-Duty Engine Oils under High Output Conditions—Caterpillar C13 Test Procedure

D7110-21 Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures

D3342-90(2017) Standard Test Method for Dispersion Stability of New (Unused) Rolling Oil Dispersions in Water

D7448-16 Standard Practice for Establishing the Competence of Laboratories Using ASTM Procedures in the Sampling and Analysis of Coal and Coke

D3402/D3402M-16 Standard Test Method for Tumbler Test for Coke

D7347-15 Standard Test Method for Determination of Olefin Content in Denatured Ethanol by Supercritical Fluid Chromatography

D396-21 Standard Specification for Fuel Oils

D3948-20 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer

D8166-21a Standard Test Method for Sizing and Counting Particulates in Middle Distillate Fuels and Biodiesel Blend (B6 to B20) Using Continuous Flow and Bottle Sampler Automatic Particle Condition Monitors

D1264-18e1 Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases

D2162-21 Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards

D7420-18 Standard Test Method for Determining Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

D7621-16(2021) Standard Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction

D7618-13(2021) Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel

D6728-16(2021) Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry

D7041-16(2021) Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbons and Hydrocarbon-Oxygenate Blends by Gas Chromatography with Flame Photometric Detection

D1552-16(2021) Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)

D8091-21 Standard Guide for Impregnation of Graphite with Molten Salt

D8235-21 Standard Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel

D5983-21 Standard Specification for Methyl Tertiary-Butyl Ether (MTBE) for Blending With Gasolines for Use as Automotive Spark-Ignition Engine Fuel

D8377-21a Standard Guide for High Temperature Strength Measurements of Graphite Impregnated with Molten Salt

D7111-16(2021) Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

D3997/D3997M-16 Standard Practice for Preparing Coke Samples for Microscopical Analysis by Reflected Light

D4176-21a Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)

D7236-16a(2021) Standard Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)

D5967-21 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine

D5757-11(2017) Standard Test Method for Determination of Attrition of FCC Catalysts by Air Jets

D4780-12(2017)e1 Standard Test Method for Determination of Low Surface Area of Catalysts and Catalyst Carriers by Multipoint Krypton Adsorption

D7751-16(2021) Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis

D8010-18 Standard Test Method for Determination of Water Soluble Alkali Content in Coal

D4641-17 Standard Practice for Calculation of Pore Size Distributions of Catalysts and Catalyst Carriers from Nitrogen Desorption Isotherms

D4284-12(2017)e1 Standard Test Method for Determining Pore Volume Distribution of Catalysts and Catalyst Carriers by Mercury Intrusion Porosimetry

D7634-10(2017) Standard Test Method for Visualizing Particulate Sizes and Morphology of Particles Contained in Hydrogen Fuel by Microscopy

D7719-21a Standard Specification for High Aromatic Content Unleaded Hydrocarbon Aviation Gasoline Test Fuel

D8393-21 Standard Guide for Determination of Pore Volume of Powdered Catalysts and Catalyst Carriers by Water Adsorption

D6316-17 Standard Test Method for Determination of Total, Combustible and Carbonate Carbon in Solid Residues from Coal and Coke

D2797/D2797M-21a Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light

D4045-19 Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry

D6609-17 Standard Guide for Part-Stream Sampling of Coal

D6883-17 Standard Practice for Manual Sampling of Stationary Coal from Railroad Cars, Barges, Trucks, or Stockpiles

D2270-10(2016) Standard Practice for Calculating Viscosity Index from Kinematic Viscosity at 40 °C and 100 °C

D7889-21 Standard Test Method for Field Determination of In-Service Fluid Properties Using IR Spectroscopy

D5341/D5341M-19 Standard Test Method for Measuring Coke Reactivity Index (CRI) and Coke Strength After Reaction (CSR)

D8071-21 Standard Test Method for Determination of Hydrocarbon Group Types and Select Hydrocarbon and Oxygenate Compounds in Automotive Spark-Ignition Engine Fuel Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)

D7622-20 Standard Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction

D6350-14 Standard Test Method for Mercury Sampling and Analysis in Natural Gas by Atomic Fluorescence Spectroscopy

D7372-21 Standard Guide for Analysis and Interpretation of Proficiency Test Program Results

D93-20 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester

D7606-17 Standard Practice for Sampling of High Pressure Hydrogen and Related Fuel Cell Feed Gases

D7651-17 Standard Test Method for Gravimetric Measurement of Particulate Concentration of Hydrogen Fuel

D5234-92(2017) Standard Guide for Analysis of Ethylene Product

D95-13(2018) Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation

D4292-17 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke

D1945-14(2019) Standard Test Method for Analysis of Natural Gas by Gas Chromatography

D5184-12(2017) Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry

D7345-17 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Micro Distillation Method)

D2505-88(2015) Standard Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography

D5623-19 Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection

D3231-18 Standard Test Method for Phosphorus in Gasoline

D6185-11(2017) Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases

D4362-19 Standard Specification for Propane Thermophysical Property Tables

D287-12b(2019) Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)

D4699-03(2018)e1 Standard Test Method for Vibratory Packing Density of Large Formed Catalyst and Catalyst Carrier Particles

D2598-21 Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis

D2786-91(2016) Standard Test Method for Hydrocarbon Types Analysis of Gas-Oil Saturates Fractions by High Ionizing Voltage Mass Spectrometry

D5481-21 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer

D7417-17 Standard Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)

D6426-18 Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils

D6591-19 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Middle Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection

D2163-14(2019) Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography

D240-19 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter

D2007-19 Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method

D937-07(2019) Standard Test Method for Cone Penetration of Petrolatum

D972-16 Standard Test Method for Evaporation Loss of Lubricating Greases and Oils

D3237-17 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy

D4463/D4463M-19 Standard Guide for Metals Free Steam Deactivation of Fresh Fluid Cracking Catalysts

D2427-06(2019) Standard Test Method for Determination of C2 through C5 Hydrocarbons in Gasolines by Gas Chromatography

D4418-17 Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines

D7688-18 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR) by Visual Observation

D7169-20e1 Standard Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography

D5504-20 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence

C515-13(2018) Standard Specification for Chemical-Resistant Ceramic Tower Packings

D6259-15(2019) Standard Practice for Determination of a Pooled Limit of Quantitation for a Test Method

D3427-19 Standard Test Method for Air Release Properties of Hydrocarbon Based Oils

D4424-09(2014) Standard Test Method for Butylene Analysis by Gas Chromatography

D1988-20 Standard Test Method for Mercaptans in Natural Gas Using Length-of-Stain Detector Tubes

D3701-17 Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry

D6304-20 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration

D2500-17a Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels

D7493-14(2018) Standard Test Method for Online Measurement of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatograph and Electrochemical Detection

D6079-18 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)

D4931-06(2017) Standard Test Method for Gross Moisture in Green Petroleum Coke

D4438-13(2018)e1 Standard Test Method for Particle Size Distribution of Catalysts and Catalyst Carriers by Electronic Counting

D3241-20c Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels

D5580-21 Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography

D6300-21 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products, Liquid Fuels, and Lubricants

D1142-95(2021) Standard Test Method for Water Vapor Content of Gaseous Fuels by Measurement of Dew-Point Temperature

D6667-21 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence

D4807-05(2020) Standard Test Method for Sediment in Crude Oil by Membrane Filtration

D2158-21 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases

E2412-10(2018) Standard Practice for Condition Monitoring of In-Service Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

D3038-93(2018) Standard Test Method for Drop Shatter Test for Coke

D2422-97(2018) Standard Classification of Industrial Fluid Lubricants by Viscosity System

D7084-18 Standard Test Method for Determination of Bulk Crush Strength of Catalysts and Catalyst Carriers

D5950-14(2020) Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)

D1071-17 Standard Test Methods for Volumetric Measurement of Gaseous Fuel Samples

D6159-17 Standard Test Method for Determination of Hydrocarbon Impurities in Ethylene by Gas Chromatography

D86-20b Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure

D7318-19e1 Standard Test Method for Existent Inorganic Sulfate in Ethanol by Potentiometric Titration

D3230-19 Standard Test Method for Salts in Crude Oil (Electrometric Method)

D4629-17 Standard Test Method for Trace Nitrogen in Liquid Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection

D7423-17 Standard Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection

D4740-20 Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test

D1093-11(2017) Standard Test Method for Acidity of Hydrocarbon Liquids and Their Distillation Residues

D4929-19a Standard Test Method for Determination of Organic Chloride Content in Crude Oil

D1796-11(2016) Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)

D6897-16 Standard Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method)

D6751-20a Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels

D6481-14(2019) Standard Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy

D4870-18 Standard Test Method for Determination of Total Sediment in Residual Fuels

D6423-20a Standard Test Method for Determination of pHe of Denatured Fuel Ethanol and Ethanol Fuel Blends

D4891-13(2018) Standard Test Method for Heating Value of Gases in Natural Gas and Flare Gases Range by Stoichiometric Combustion

D4422-19 Standard Test Method for Ash in Analysis of Petroleum Coke

D1857/D1857M-18 Standard Test Method for Fusibility of Coal and Coke Ash

D3605-17 Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy

D3173/D3173M-17a Standard Test Method for Moisture in the Analysis Sample of Coal and Coke

D1094-07(2019) Standard Test Method for Water Reaction of Aviation Fuels

D5972-16 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)

D6890-21 Standard Test Method for Determination of Ignition Delay and Derived Cetane Number (DCN) of Diesel Fuel Oils by Combustion in a Constant Volume Chamber

D7155-20 Standard Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils

D1319-20a Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption

D4888-20 Standard Test Method for Water Vapor in Natural Gas Using Length-of-Stain Detector Tubes

D5853-17a Standard Test Method for Pour Point of Crude Oils

D7623-20 Standard Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method

D128-98(2019) Standard Test Methods for Analysis of Lubricating Grease

D4530-15(2020) Standard Test Method for Determination of Carbon Residue (Micro Method)

D4208-19 Standard Test Method for Total Chlorine in Coal by the Oxygen Vessel Combustion/Ion Selective Electrode Method

D3907/D3907M-19 Standard Test Method for Testing Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test

D5452-20 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration

D6334-12(2017)e1 Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence

D611-12(2016) Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents

D3461-18 Standard Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method)

D6376-10(2017)e1 Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-ray Fluorescence Spectroscopy

D6542-05(2018)e1 Standard Practice for Tonnage Calculation of Coal in a Stockpile

D4824-13(2018) Standard Test Method for Determination of Catalyst Acidity by Ammonia Chemisorption

D4808-17 Standard Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy

D3766-08(2018) Standard Terminology Relating to Catalysts and Catalysis

D5003-19 Standard Test Method for Hardgrove Grindability Index (HGI) of Petroleum Coke

D7777-13(2018)e1 Standard Test Method for Density, Relative Density, or API Gravity of Liquid Petroleum by Portable Digital Density Meter

D6347/D6347M-05(2018) Standard Test Method for Determination of Bulk Density of Coal Using Nuclear Backscatter Depth Density Methods

D5154/D5154M-18 Standard Test Method for Determining Activity and Selectivity of Fluid Catalytic Cracking (FCC) Catalysts by Microactivity Test

D7085-04(2018) Standard Guide for Determination of Chemical Elements in Fluid Catalytic Cracking Catalysts by X-ray Fluorescence Spectrometry (XRF)

D6824-13(2018) Standard Test Method for Determining Filterability of Aviation Turbine Fuel

D3227-16 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)

D3341-16 Standard Test Method for Lead in Gasoline—Iodine Monochloride Method

D1298-12b(2017) Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method

D892-18 Standard Test Method for Foaming Characteristics of Lubricating Oils

D6708-21 Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material

D6839-21a Standard Test Method for Hydrocarbon Types, Oxygenated Compounds, Benzene, and Toluene in Spark Ignition Engine Fuels by Multidimensional Gas Chromatography

D4164-13(2018) Standard Test Method for Mechanically Tapped Packing Density of Formed Catalyst and Catalyst Carriers

D94-07(2017) Standard Test Methods for Saponification Number of Petroleum Products

D3228-20 Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method

D938-12(2017) Standard Test Method for Congealing Point of Petroleum Waxes, Including Petrolatum

D2713-20 Standard Test Method for Dryness of Propane (Valve Freeze Method)

D5018-18 Standard Test Method for Shear Viscosity of Coal-Tar and Petroleum Pitches

D97-17b Standard Test Method for Pour Point of Petroleum Products

D7756-19 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases by Gas Chromatography with Liquid, On-Column Injection

D5771-21 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Optical Detection Stepped Cooling Method)

D130-19 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test

D6971-09(2014) Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry

D5443-14(2018) Standard Test Method for Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200 °C by Multi-Dimensional Gas Chromatography

D4007-11(2016)e1 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)

D1159-07(2017) Standard Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration

D8214-18 Standard Test Method for Forms of Sulfur in Coal by Inductively Coupled Plasma Atomic Emission Spectrometry

D482-19 Standard Test Method for Ash from Petroleum Products

D5865/D5865M-19 Standard Test Method for Gross Calorific Value of Coal and Coke

D8213-18 Standard Test Method for Determination of Boron in Coal

D6172/D6172M-18 Standard Test Method for Determining the Volume of Bulk Materials Using Contours or Cross Sections Created by Direct Operator Compilation Using Photogrammetric Procedures

D7676-18 Standard Practice for Screening Organic Halides Contained in Hydrogen or Other Gaseous Fuels

D7653-18 Standard Test Method for Determination of Trace Gaseous Contaminants in Hydrogen Fuel by Fourier Transform Infrared (FTIR) Spectroscopy

D6228-19 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection

D5114/D5114M-90(2018)e1 Standard Test Method for Laboratory Froth Flotation of Coal in a Mechanical Cell

D7757-17 Standard Test Method for Silicon in Gasoline and Related Products by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry

D7607/D7607M-19 Standard Test Method for Analysis of Oxygen in Gaseous Fuels (Electrochemical Sensor Method)

D4529-17 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

D525-12a(2019) Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method)

D293/D293M-18 Standard Test Method for the Sieve Analysis of Coke

D7900-18e1 Standard Test Method for Determination of Light Hydrocarbons in Stabilized Crude Oils by Gas Chromatography

D4239-18e1 Standard Test Method for Sulfur in the Analysis Sample of Coal and Coke Using High-Temperature Tube Furnace Combustion

D7596-14 Standard Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester

D5772-21 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Linear Cooling Rate Method)

D7319-17 Standard Test Method for Determination of Existent and Potential Sulfate and Inorganic Chloride in Fuel Ethanol and Butanol by Direct Injection Suppressed Ion Chromatography

D3238-17a Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method

D1412/D1412M-20 Standard Test Method for Equilibrium Moisture of Coal at 96 to 97 Percent Relative Humidity and 30 °C

D7328-17 Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection

D2273-08(2016) Standard Test Method for Trace Sediment in Lubricating Oils

D156-15 Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)

D2504-88(2015) Standard Test Method for Noncondensable Gases in C2 and Lighter Hydrocarbon Products by Gas Chromatography

D323-20a Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)

D5016-16 Standard Test Method for Total Sulfur in Coal and Coke Combustion Residues Using a High-Temperature Tube Furnace Combustion Method with Infrared Absorption

D5762-18a Standard Test Method for Nitrogen in Liquid Hydrocarbons, Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence

D4868-17 Standard Test Method for Estimation of Net and Gross Heat of Combustion of Hydrocarbon Burner and Diesel Fuels

D7206/D7206M-19 Standard Guide for Cyclic Deactivation of Fluid Catalytic Cracking (FCC) Catalysts with Metals

D5501-20 Standard Test Method for Determination of Ethanol and Methanol Content in Fuels Containing Greater than 20 % Ethanol by Gas Chromatography

D1321-16a Standard Test Method for Needle Penetration of Petroleum Waxes

D5357-19 Standard Test Method for Determination of Relative Crystallinity of Zeolite Sodium A by X-ray Diffraction

D1157-91(2019) Standard Test Method for Total Inhibitor Content (TBC) of Light Hydrocarbons

D2274-14(2019) Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)

D3906-19 Standard Test Method for Determination of Relative X-ray Diffraction Intensities of Faujasite-Type Zeolite-Containing Materials

E870-82(2019) Standard Test Methods for Analysis of Wood Fuels

E873-82(2019) Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels

E872-82(2019) Standard Test Method for Volatile Matter in the Analysis of Particulate Wood Fuels

E871-82(2019) Standard Test Method for Moisture Analysis of Particulate Wood Fuels

D7668-17 Standard Test Method for Determination of Derived Cetane Number (DCN) of Diesel Fuel Oils—Ignition Delay and Combustion Delay Using a Constant Volume Combustion Chamber Method

D7096-19 Standard Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography

E1534-93(2019) Standard Test Method for Determination of Ash Content of Particulate Wood Fuels

E1358-97(2019) Standard Test Method for Determination of Moisture Content of Particulate Wood Fuels Using a Microwave Oven

D7094-17a Standard Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester

D2595-17 Standard Test Method for Evaporation Loss of Lubricating Greases Over Wide-Temperature Range

D524-15(2019) Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products

D4683-20 Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 °C

D1840-07(2017) Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry

D2266-01(2015) Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method)

D874-13a(2018) Standard Test Method for Sulfated Ash from Lubricating Oils and Additives

D4423-10(2015) Standard Test Method for Determination of Carbonyls in C4 Hydrocarbons

D7500-15(2019) Standard Test Method for Determination of Boiling Range Distribution of Distillates and Lubricating Base Oils—in Boiling Range from 100 °C to 735 °C by Gas Chromatography

D6045-20 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method

D7978-14(2019) Standard Test Method for Determination of the Viable Aerobic Microbial Content of Fuels and Associated Water—Thixotropic Gel Culture Method

D4180-13(2018) Standard Test Method for Vibratory Packing Density of Formed Catalyst Particles and Catalyst Carriers

D4628-16 Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry

D8247-19 Standard Test Method for Determination of Total Fluorine and Total Chlorine in Coal by Oxidative Pyrohydrolytic Combustion Followed by Ion Chromatography Detection

E1757-19 Standard Practice for Preparation of Biomass for Compositional Analysis

D7964/D7964M-19 Standard Test Method for Determining Activity of Fluid Catalytic Cracking (FCC) Catalysts in a Fluidized Bed

D7220-12(2017) Standard Test Method for Sulfur in Automotive, Heating, and Jet Fuels by Monochromatic Energy Dispersive X-ray Fluorescence Spectrometry

D4810-20 Standard Test Method for Hydrogen Sulfide in Natural Gas Using Length-of-Stain Detector Tubes

D7039-15a(2020) Standard Test Method for Sulfur in Gasoline, Diesel Fuel, Jet Fuel, Kerosine, Biodiesel, Biodiesel Blends, and Gasoline-Ethanol Blends by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry

D5061-19 Standard Test Method for Microscopical Determination of the Textural Components of Metallurgical Coke

D664-18e2 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration

D129-18 Standard Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method)

D3242-11(2017) Standard Test Method for Acidity in Aviation Turbine Fuel

D3120-08(2019) Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry

D2961/D2961M-19 Standard Practice for Single-Stage Total Moisture Less than 15 % in Coal Reduced to 2.36 mm [No. 8 Sieve] Topsize

D7691-16 Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

D3343-16 Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels

D2420-13(2018) Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)

D3942-19 Standard Test Method for Determination of the Unit Cell Dimension of a Faujasite-Type Zeolite

D7647-10(2018) Standard Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction

D92-18 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester

D5854-19a Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products

D6175-03(2019) Standard Test Method for Radial Crush Strength of Extruded Catalyst and Catalyst Carrier Particles

D4636-17 Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils

D346/D346M-11(2019)e1 Standard Practice for Collection and Preparation of Coke Samples for Laboratory Analysis

D613-18ae1 Standard Test Method for Cetane Number of Diesel Fuel Oil

D4781-03(2018)e1 Standard Test Method for Mechanically Tapped Packing Density of Fine Catalyst Particles and Catalyst Carrier Particles

D2386-19 Standard Test Method for Freezing Point of Aviation Fuels

D2384-19 Standard Test Methods for Traces of Volatile Chlorides in Butane-Butene Mixtures

D7224-20 Standard Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer

D7582-15 Standard Test Methods for Proximate Analysis of Coal and Coke by Macro Thermogravimetric Analysis

D6371-17a Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels

D3246-15 Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry

D974-21 Standard Test Method for Acid and Base Number by Color-Indicator Titration

D4308-21 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter

D1838-21 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases

D4365-19 Standard Test Method for Determining Micropore Volume and Zeolite Area of a Catalyst

D5188-16 Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber and Piston Based Method)

D8150-17 Standard Test Method for Determination of Organic Chloride Content in Crude Oil by Distillation Followed by Detection Using Combustion Ion Chromatography

D6450-16a(2021) Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester

D7807-20 Standard Test Method for Determination of Boiling Range Distribution of Hydrocarbon and Sulfur Components of Petroleum Distillates by Gas Chromatography and Chemiluminescence Detection

D4951-14(2019) Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry

D1500-12(2017) Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)

D7346-15(2021) Standard Test Method for No Flow Point and Pour Point of Petroleum Products and Liquid Fuels

D4928-12(2018) Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration

D8221-18ae1 Standard Practice for Determining the Calculated Methane Number (MNC) of Gaseous Fuels Used in Internal Combustion Engines

D91-02(2019) Standard Test Method for Precipitation Number of Lubricating Oils

D2711-17 Standard Test Method for Demulsibility Characteristics of Lubricating Oils

D4642-04(2016) Standard Test Method for Platinum in Reforming Catalysts by Wet Chemistry

D1267-18 Standard Test Method for Gauge Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method)

D5001-19e1 Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)

D3338/D3338M-20a Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

D4952-12(2017) Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)

D6550-20 Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography

D87-09(2018) Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)

D5799-19 Standard Test Method for Determination of Peroxides in Butadiene

D2982-07(2019) Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils

D7171-20 Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy

D189-06(2019) Standard Test Method for Conradson Carbon Residue of Petroleum Products

D7876-13(2018) Standard Practice for Practice for Sample Decomposition Using Microwave Heating (With or Without Prior Ashing) for Atomic Spectroscopic Elemental Determination in Petroleum Products and Lubricants

D3828-16a(2021) Standard Test Methods for Flash Point by Small Scale Closed Cup Tester

D7279-20 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer

D1265-11(2017)e1 Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method

D1266-18 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)

D409/D409M-16 Standard Test Method for Grindability of Coal by the Hardgrove-Machine Method

D6377-20 Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCRx (Expansion Method)

D5708-15(2020)e1 Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry

D440-07(2019)e1 Standard Test Method of Drop Shatter Test for Coal

D197-19 Standard Test Method for Sampling and Fineness Test of Pulverized Coal

D441-07(2019)e1 Standard Test Method of Tumbler Test for Coal

D4749/D4749M-87(2019)e1 Standard Test Method for Performing the Sieve Analysis of Coal and Designating Coal Size

D1070-03(2017) Standard Test Methods for Relative Density of Gaseous Fuels

D7213-15(2019) Standard Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 °C to 615 °C by Gas Chromatography

D6749-02(2018) Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)

D1160-18 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure

D446-12(2017) Standard Specifications and Operating Instructions for Glass Capillary Kinematic Viscometers

D721-17 Standard Test Method for Oil Content of Petroleum Waxes

D4468-85(2015) Standard Test Method for Total Sulfur in Gaseous Fuels by Hydrogenolysis and Rateometric Colorimetry

D3831-12(2017) Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy

D6470-99(2020) Standard Test Method for Salt in Crude Oils (Potentiometric Method)

D4006-16e1 Standard Test Method for Water in Crude Oil by Distillation

D4513-11(2017) Standard Test Method for Particle Size Distribution of Catalytic Materials by Sieving

D1318-16 Standard Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method)

D7482-17 Standard Practice for Sampling, Storage, and Handling of Hydrocarbons for Mercury Analysis

D4371/D4371M-06(2019)e1 Standard Test Method for Determining the Washability Characteristics of Coal

D6722-19 Standard Test Method for Total Mercury in Coal and Coal Combustion Residues by Direct Combustion Analysis

D7563-10(2016) Standard Test Method for Evaluation of the Ability of Engine Oil to Emulsify Water and Simulated Ed85 Fuel

D6082-12(2017) Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils

D4650-19 Standard Specification for Normal Butane Thermophysical Property Tables

D4739-17 Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration

D5600-17 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

D6595-17 Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry

D5453-19a Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence

D5773-21 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels (Constant Cooling Rate Method)

D5185-18 Standard Test Method for Multielement Determination of Used and Unused Lubricating Oils and Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

D5236-18a Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method)

D5863-00a(2016) Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry

D4809-18 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)

D2014/D2014M-20 Standard Test Method for Expansion or Contraction of Coal by the Sole-Heated Oven

D1250-19e1 Standard Guide for the Use of the Joint API and ASTM Adjunct for Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils: API MPMS Chapter 11.1

D7649-19 Standard Test Method for Determination of Trace Carbon Dioxide, Argon, Nitrogen, Oxygen and Water in Hydrogen Fuel by Jet Pulse Injection and Gas Chromatography/Mass Spectrometer Analysis

D6543-20 Standard Guide to the Evaluation of Measurements Made by Online Coal Analyzers

D665-19 Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water

D4784-93(2015) Standard Specification for LNG Density Calculation Models

D4651-14(2020) Standard Specification for Isobutane Thermophysical Property Tables

D3984-19 Standard Specification for Ethane Thermophysical Property Tables

D3588-98(2017)e1 Standard Practice for Calculating Heat Value, Compressibility Factor, and Relative Density of Gaseous Fuels

D4084-07(2017) Standard Test Method for Analysis of Hydrogen Sulfide in Gaseous Fuels (Lead Acetate Reaction Rate Method)

D5454-11(2020) Standard Test Method for Water Vapor Content of Gaseous Fuels Using Electronic Moisture Analyzers

D4984-20 Standard Test Method for Carbon Dioxide in Natural Gas Using Length-of-Stain Detector Tubes

D7265-12(2018) Standard Specification for Hydrogen Thermophysical Property Tables

D3175-20 Standard Test Method for Volatile Matter in the Analysis Sample of Coal and Coke

E3181-20 Standard Practice for Determination of the Converted Fraction of Starch and Cellulosic Content From a Fuel Ethanol Production Facility

D5293-20 Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between –10 °C and –35 °C Using Cold-Cranking Simulator

D1826-94(2017) Standard Test Method for Calorific (Heating) Value of Gases in Natural Gas Range by Continuous Recording Calorimeter

C886-21 Standard Test Method for Scleroscope Hardness Testing of Carbon and Graphite Materials

E3066-20 Standard Practice for Evaluating Relative Sustainability Involving Energy or Chemicals from Biomass

D4464-15(2020) Standard Test Method for Particle Size Distribution of Catalytic Materials by Laser Light Scattering

D4058-96(2020) Standard Test Method for Attrition and Abrasion of Catalysts and Catalyst Carriers

D3956-12(2018) Standard Specification for Methane Thermophysical Property Tables

D7451-21 Standard Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark-Ignition Engine Fuels

D4326-21 Standard Test Method for Major and Minor Elements in Coal Ash By X-Ray Fluorescence

D1072-06(2017) Standard Test Method for Total Sulfur in Fuel Gases by Combustion and Barium Chloride Titration

D4684-20a Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature

D5287-08(2015) Standard Practice for Automatic Sampling of Gaseous Fuels

D2885-21 Standard Test Method for Determination of Octane Number of Spark-Ignition Engine Fuels by On-Line Direct Comparison Technique

D6379-21e1 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection

D8215-21 Standard Practice for Statistical Modeling of Uncertainty in Assessment of In-place Coal Resources

D1946-90(2019) Standard Practice for Analysis of Reformed Gas by Gas Chromatography

D7708-14 Standard Test Method for Microscopical Determination of the Reflectance of Vitrinite Dispersed in Sedimentary Rocks

D6414-14 Standard Test Methods for Total Mercury in Coal and Coal Combustion Residues by Acid Extraction or Wet Oxidation/Cold Vapor Atomic Absorption

E1758-01(2020) Standard Test Method for Determination of Carbohydrates in Biomass by High Performance Liquid Chromatography

E1755-01(2020) Standard Test Method for Ash in Biomass

E1721-01(2020) Standard Test Method for Determination of Acid-Insoluble Residue in Biomass

E1821-08(2020) Standard Test Method for Determination of Carbohydrates in Biomass by Gas Chromatography

D3174-12(2018)e1 Standard Test Method for Ash in the Analysis Sample of Coal and Coke from Coal

E1756-08(2020) Standard Test Method for Determination of Total Solids in Biomass

E3256-20 Standard Practice for Reference Scenarios When Evaluating the Relative Sustainability of Bioproducts

E3146-20 Standard Test Method for Determination of Carbonyls in Pyrolysis Bio-Oils by Potentiometric Titration

D8000-15(2020) Standard Practice for Flow Conditioning of Natural Gas and Liquids

D2234/D2234M-20 Standard Practice for Collection of a Gross Sample of Coal

E3237-19 Standard Specification for Undenatured Ethanol from Biomass for Use in Industrial Applications

D3908-20 Standard Test Method for Hydrogen Chemisorption on Supported Platinum Catalysts by Volumetric Vacuum Method

D3663-20 Standard Test Method for Surface Area of Catalysts and Catalyst Carriers

D4222-20 Standard Test Method for Determination of Nitrogen Adsorption and Desorption Isotherms of Catalysts and Catalyst Carriers by Static Volumetric Measurements

D5274-00(2019) Standard Guide for Analysis of 1,3–Butadiene Product

D7040-04(2020) Standard Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry

D8194-18e1 Standard Practice for Evaluation of Suitability of 37 mm Filter Monitors and 47 mm Filters Used to Determine Particulate Contaminant in Aviation Turbine Fuels

D6756-17 Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer

D7797-18 Standard Test Method for Determination of the Fatty Acid Methyl Esters Content of Aviation Turbine Fuel Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method

D5482-20a Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method—Atmospheric)

D6022-19 Standard Practice for Calculation of Permanent Shear Stability Index

D4072-98(2018) Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch

D2509-20ae1 Standard Test Method for Measurement of Load-Carrying Capacity of Lubricating Grease (Timken Method)

D7464-20 Standard Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing

D893-14(2018) Standard Test Method for Insolubles in Used Lubricating Oils

D2392-15(2021) Standard Test Method for Color of Dyed Aviation Gasolines

D6748-02a(2017) Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer)

D2423-90(2017) Standard Test Method for Surface Wax on Waxed Paper or Paperboard

D4306-20 Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination

D7578-20 Standard Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants

D8098-17 Standard Test Method for Permanent Gases in C2 and C3 Hydrocarbon Products by Gas Chromatography and Pulse Discharge Helium Ionization Detector

D5304-20 Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure

D5384-14(2019) Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)

D7450-19 Standard Specification for Performance of Rear Axle Gear Lubricants Intended for API Category GL-5 Service

D6547-16 Standard Test Method for Corrosiveness of Lubricating Fluid to Bimetallic Couple

D7686-19 Standard Test Method for Field-Based Condition Monitoring of Soot in In-Service Lubricants Using a Fixed-Filter Infrared (IR) Instrument

D5306-92(2018) Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids

D7972-14(2020) Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature

D4047-18 Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method

D7923-19 Standard Test Method for Water in Ethanol and Hydrocarbon Blends by Karl Fischer Titration

D4627-12(2017) Standard Test Method for Iron Chip Corrosion for Water–Miscible Metalworking Fluids

D6546-15 Standard Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications

D6666-20 Standard Guide for Evaluation of Aqueous Polymer Quenchants

D6618-16 Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine

D7829-13(2018) Standard Guide for Sediment and Water Determination in Crude Oil

D8305-19 Standard Test Method for The Determination of Total Aromatic Hydrocarbons and Total Polynuclear Aromatic Hydrocarbons in Aviation Turbine Fuels and other Kerosene Range Fuels by Supercritical Fluid Chromatography

D7739-11(2020) Standard Practice for Thermal Oxidative Stability Measurement via Quartz Crystal Microbalance

D2501-14(2019) Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils

D5056-17 Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption

D6417-15(2019) Standard Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography

D5984-11(2017) Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration

C747-16 Standard Test Method for Moduli of Elasticity and Fundamental Frequencies of Carbon and Graphite Materials by Sonic Resonance

D1478-20 Standard Test Method for Low-Temperature Torque of Ball Bearing Grease

D8322-20 Standard Test Method for Determination of Elements in Residual Fuels and Crude Oils by Microwave Plasma Atomic Emission Spectroscopy (MP-AES)

C559-16(2020) Standard Test Method for Bulk Density by Physical Measurements of Manufactured Carbon and Graphite Articles

D612-88(2017) Standard Test Method for Carbonizable Substances in Paraffin Wax

D2596-20 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)

D8004-15 Standard Test Method for Fuel Dilution of In-Service Lubricants Using Surface Acoustic Wave Sensing

D187-18 Standard Test Method for Burning Quality of Kerosene

D8182-18 Standard Test Method for Alloy Classification of Wear Debris using Laser-Induced Breakdown Spectroscopy (LIBS)

D7752-18 Standard Practice for Evaluating Compatibility of Mixtures of Hydraulic Fluids

D6375-09(2019) Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method

D6681-17 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1P Test Procedure

D7996-15 Standard Test Method for Measuring Visible Spectrum of Asphaltenes in Heavy Fuel Oils and Crude Oils by Spectroscopy in a Microfluidic Platform

C562-15 Standard Test Method for Moisture in a Graphite Sample

D5598-20 Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling

D7454-19 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus

D3524-14(2020) Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography

C561-16 Standard Test Method for Ash in a Graphite Sample

D7525-14(2019)e1 Standard Test Method for Oxidation Stability of Spark Ignition Fuel—Rapid Small Scale Oxidation Test (RSSOT)

D3704-96(2017) Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion

D4626-95(2019) Standard Practice for Calculation of Gas Chromatographic Response Factors

D6447-09(2021) Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis

D2549-02(2017) Standard Test Method for Separation of Representative Aromatics and Nonaromatics Fractions of High-Boiling Oils by Elution Chromatography

D4892-14(2019)e1 Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)

D3702-94(2019) Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine

D3521-86(2017) Standard Test Method for Surface Wax Coating On Corrugated Board

D3236-15(2021) Standard Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials

D6354-12(2017) Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production

D5770-11(2017) Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing

D71-94(2019) Standard Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)

D2962-10(2019) Standard Practice for Calculating Volume-Temperature Correction For Coal-Tar Pitches

D6553-00(2016) Standard Test Method for Coolant Compatibility of Way Lubricants

D6986-03(2020) Standard Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)

D6186-19 Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)

D61-15(2019) Standard Test Method for Softening Point of Pitches (Cube-in-Water Method)

D7219-19 Standard Specification for Isotropic and Near-isotropic Nuclear Graphites

D6514-03(2019)e1 Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils

D2269-10(2020) Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption

D2764-20 Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch

D2981-94(2019) Standard Test Method for Wear Life of Solid Film Lubricants in Oscillating Motion

D5534-94(2018) Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids

D2593-19 Standard Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography

D8184-18e1 Standard Test Method for Ferrous Wear Debris Monitoring in In-Service Fluids Using a Particle Quantifier Instrument

D8304-19 Standard Test Method for Determination of Compounded Forms of Iron in In-service Fluids

C651-20 Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Four-Point Loading at Room Temperature

D3699-19 Standard Specification for Kerosine

D7684-11(2020) Standard Guide for Microscopic Characterization of Particles from In-Service Lubricants

D7959-19 Standard Test Method for Chloride Content Determination of Aviation Turbine Fuels using Chloride Test Strip

D6896-20a Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature

D4170-16 Standard Test Method for Fretting Wear Protection by Lubricating Greases

D7827-19 Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene from Heavy Fuel Oils as Separability Number by an Optical Device

D6812-04a(2019) Standard Practice for Ground-Based Octane Rating Procedures for Turbocharged/Supercharged Spark Ignition Aircraft Engines

D1465-10(2021) Standard Test Method for Blocking and Picking Points of Petroleum Wax

D8277-20 Standard Test Method for Wet Filterability of Lubricants and Hydraulic Fluids by Mass Flow Technique

D2649-20a Standard Test Method for Corrosion Characteristics of Solid Film Lubricants

D942-19 Standard Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Pressure Vessel Method

D3104-14a(2018) Standard Test Method for Softening Point of Pitches (Mettler Softening Point Method)

D2650-10(2021) Standard Test Method for Chemical Composition of Gases by Mass Spectrometry

D7060-20 Standard Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)

D7044-15 Standard Specification for Biodegradable Fire Resistant Hydraulic Fluids

D1217-20 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer

D2416-20 Standard Test Method for Coking Value of Tar and Pitch (Modified Conradson)

D7898-14(2020) Standard Practice for Lubrication and Hydraulic Filter Debris Analysis (FDA) for Condition Monitoring of Machinery

D7579-09(2019) Standard Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol

D8072-17 Standard Classification for Reporting Solids and Insoluble Water Contamination of Hydrocarbon-Based Petroleum Products When Analyzed by Imaging Instrumentation

D6278-20a Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus

C1234-11(2019) Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations

D2534-88(2017) Standard Test Method for Coefficient of Kinetic Friction for Wax Coatings

D7646-10(2019) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis

D7416-09(2020) Standard Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Vis

D7112-19 Standard Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)

D3712-18 Standard Test Method of Analysis of Oil-Soluble Sulfonates by Liquid Chromatography

D7754-19 Standard Test Method for Determination of Trace Oxygenates in Automotive Spark-Ignition Engine Fuel by Multidimensional Gas Chromatography

D7260-20 Standard Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants

D2712-20 Standard Test Method for Determination of Hydrocarbon Impurities in High Purity Propylene by Gas Chromatography

D6006-17 Standard Guide for Assessing Biodegradability of Hydraulic Fluids

D7874-13(2018) Standard Guide for Applying Failure Mode and Effect Analysis (FMEA) to In-Service Lubricant Testing

D5985-02(2020) Standard Test Method for Pour Point of Petroleum Products (Rotational Method)

D5004-11(2017) Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement

D8149-20 Standard Practice for Optimization, Calibration, and Validation of Ion Chromatographic Determination of Heteroatoms and Anions in Petroleum Products and Lubricants

C838-16 Standard Test Method for Bulk Density of As-Manufactured Carbon and Graphite Shapes

D8290-20 Standard Test Method for Determination of Fatty Acid Methyl Esters (FAME) in Aviation Turbine Fuel using Mid-Infrared Laser Spectroscopy

D3233-19 Standard Test Methods for Measurement of Extreme Pressure Properties of Fluid Lubricants (Falex Pin and Vee Block Methods)

D6448-16 Standard Specification for Industrial Burner Fuels from Used Lubricating Oils

D4312-20 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)

D5761-96(2017) Standard Practice for Emulsification/Suspension of Multiphase Fluid Waste Materials

D4174-17 Standard Practice for Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems

D7995-19 Standard Test Method for Total Water in Liquid Butane by Liquefied Gas Sampler and Coulometric Karl Fischer Titration

D6158-18 Standard Specification for Mineral Hydraulic Oils

D6074-15 Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils

D6974-20 Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures

D2415-20 Standard Test Method for Ash in Coal Tar and Pitch

D127-19 Standard Test Method for Drop Melting Point of Petroleum Wax, Including Petrolatum

D6080-18a Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids

D8181-19 Standard Specification for Microemulsion Blendstock for Preparing Microemulsion Test Fuel Oils

D7061-19e1 Standard Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene-Containing Heavy Fuel Oils as Separability Number by an Optical Scanning Device

D6421-20 Standard Test Method for Evaluating Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling by Bench Procedure

D3239-91(2016) Standard Test Method for Aromatic Types Analysis of Gas-Oil Aromatic Fractions by High Ionizing Voltage Mass Spectrometry

C816-15(2020)e1 Standard Test Method for Sulfur Content in Graphite by Combustion-Iodometric Titration Method

D8289-20 Standard Test Method for Tensile Strength Estimate by Disc Compression of Manufactured Graphite

D5303-20 Standard Test Method for Trace Carbonyl Sulfide in Propylene by Gas Chromatography

D4742-17 Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)

C749-15(2020) Standard Test Method for Tensile Stress-Strain of Carbon and Graphite

D7961-17 Standard Practice for Calibrating U-tube Density Cells over Large Ranges of Temperature and Pressure

D7303-17 Standard Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry

D7097-19 Standard Test Method for Determination of Moderately High Temperature Piston Deposits by Thermo-Oxidation Engine Oil Simulation Test—TEOST MHT

D4304-17 Standard Specification for Mineral and Synthetic Lubricating Oil Used in Steam or Gas Turbines

C560-20 Standard Test Methods for Chemical Analysis of Graphite

D566-20 Standard Test Method for Dropping Point of Lubricating Grease

D2890-92(2018) Standard Test Method for Calculation of Liquid Heat Capacity of Petroleum Distillate Fuels

D1742-20 Standard Test Method for Oil Separation from Lubricating Grease During Storage

D8288-19 Standard Test Method for Comparison of Metalworking Fluids Using a Tapping Torque Test Machine

D6203-17 Standard Test Method for Thermal Stability of Way Lubricants

D6201-19a Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation

D4051-10(2021) Standard Practice for Preparation of Low-Pressure Gas Blends

D8325-20 Standard Guide for Evaluation of Nuclear Graphite Surface Area and Porosity by Gas Adsorption Measurements

D8144-18e1 Standard Test Method for Separation and Determination of Aromatics, Nonaromatics, and FAME Fractions in Middle Distillates by Solid-Phase Extraction and Gas Chromatography

D5500-20a Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation

D6923-18 Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure

D6970-03(2019) Standard Practice for Collection of Calcined Petroleum Coke Samples for Analysis

D6922-13(2018) Standard Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils

D2879-18 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope

D5621-20 Standard Test Method for Sonic Shear Stability of Hydraulic Fluids

D6258-17 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels

D3235-16e1 Standard Test Method for Solvent Extractables in Petroleum Waxes

C769-15(2020)e1 Standard Test Method for Sonic Velocity in Manufactured Carbon and Graphite Materials for Use in Obtaining an Approximate Value of Young's Modulus

D1025-10(2021) Standard Test Method for Nonvolatile Residue of Polymerization-Grade Butadiene

C748-20 Standard Test Method for Rockwell Hardness of Graphite Materials

D7058-19 Standard Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer

D8093-19 Standard Guide for Nondestructive Evaluation of Nuclear Grade Graphite

D6892-03(2020) Standard Test Method for Pour Point of Petroleum Products (Robotic Tilt Method)

D2070-16e1 Standard Test Method for Thermal Stability of Hydraulic Oils

D7975-14 Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCRx-F(Tm°C)(Manual Expansion Field Method)

D4419-90(2021) Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)

D7917-14(2018) Standard Practice for Inductive Wear Debris Sensors in Gearbox and Drivetrain Applications

D7825-18 Standard Practice for Generating a Process Stream Property Value through Application of a Process Stream Analyzer

D3348-12(2017) Standard Test Method for Rapid Field Test for Trace Lead in Unleaded Gasoline (Colorimetric Method)

D6353-06(2017)e1 Standard Guide for Sampling Plan and Core Sampling for Prebaked Anodes Used in Aluminum Production

D8255-19 Standard Guide for Work of Fracture Measurements on Small Nuclear Graphite Specimens

D5182-19 Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)

D6969-17 Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis

D8315-20 Standard Test Method for Determination of Wear Metals and Contamination Elements in Used Industrial Oils by Sweeping Flat Electrode Atomic Emission Spectrometry

D2880-20 Standard Specification for Gas Turbine Fuel Oils

D7421-19 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Oils Using High-Frequency, Linear-Oscillation (SRV) Test Machine

D8276-19 Standard Test Method for Hydrocarbon Types in Middle Distillates, including Biodiesel Blends by Gas Chromatography/Mass Spectrometry

D2669-16 Standard Test Method for Apparent Viscosity of Petroleum Waxes Compounded with Additives (Hot Melts)

C781-20 Standard Practice for Testing Graphite Materials for Gas-Cooled Nuclear Reactor Components

D7899-19 Standard Test Method for Measuring the Merit of Dispersancy of In-Service Engine Oils with Blotter Spot Method

D8146-18 Standard Guide for Evaluating Test Method Capability and Fitness for Use

D4486-18 Standard Test Method for Kinematic Viscosity of Volatile and Reactive Liquids

D7946-19 Standard Test Method for Initial pH (i-pH)-Value of Petroleum Products

D4865-19 Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems

D7214-20 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation

D7845-20 Standard Test Method for Determination of Chemical Species in Marine Fuel Oil by Multidimensional Gas Chromatography/Mass Spectrometry

D2710-20 Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration

D8252-19e1 Standard Test Method for Vanadium and Nickel in Crude and Residual Oil by X-ray Spectrometry

D5842-19 Standard Practice for Sampling and Handling of Fuels for Volatility Measurement

D4930-06(2017) Standard Test Method for Dust Control Material on Calcined Petroleum Coke

D5846-07(2017) Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus

D7721-17 Standard Practice for Determining the Effect of Fluid Selection on Hydraulic System or Component Efficiency

D322-97(2016) Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation

D8206-18 Standard Test Method for Oxidation Stability of Lubricating Greases—Rapid Small-Scale Oxidation Test (RSSOT)

D6120-97(2017)e1 Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature

D4898-16 Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis

D8147-17 Standard Specification for Special-Purpose Test Fuels for Aviation Compression-Ignition Engines

D4539-17 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)

D8110-17 Standard Test Method for Elemental Analysis of Distillate Products by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)

D8003-15a(2021) Standard Test Method for Determination of Light Hydrocarbons and Cut Point Intervals in Live Crude Oils and Condensates by Gas Chromatography

D1550-18 Standard ASTM Butadiene Measurement Tables

D1481-17 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer

D7215-16 Standard Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels

D2892-20 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)

D341-20e1 Standard Practice for Viscosity-Temperature Equations and Charts for Liquid Petroleum or Hydrocarbon Products

D3703-18 Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels, Gasoline and Diesel Fuels

D3344-90(2021) Standard Test Method for Total Wax Content of Corrugated Paperboard

D2318-20 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch

D4296-18 Standard Practice for Sampling Pitch

D5275-20 Standard Test Method for Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids

D2889-95(2019) Standard Test Method for Calculation of True Vapor Pressures of Petroleum Distillate Fuels

D1404/D1404M-99(2019) Standard Test Method for Estimation of Deleterious Particles in Lubricating Grease

C714-17 Standard Test Method for Thermal Diffusivity of Carbon and Graphite by Thermal Pulse Method

D4293-15e1 Standard Specification for Phosphate Ester Based Fluids for Turbine Lubrication and Steam Turbine Electro-Hydraulic Control (EHC) Applications

D6046-18 Standard Classification of Hydraulic Fluids for Environmental Impact

D7546-15 Standard Test Method for Determination of Moisture in New and In-Service Lubricating Oils and Additives by Relative Humidity Sensor

D1662-19 Standard Test Method for Active Sulfur in Cutting Oils

D7545-14(2019)e1 Standard Test Method for Oxidation Stability of Middle Distillate Fuels—Rapid Small Scale Oxidation Test (RSSOT)

D8227-20 Standard Test Method for Determining the Coefficient of Friction of Synchronizer Lubricated by Mechanical Transmission Fluids (MTF) Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

D6443-14(2019)e1 Standard Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)

D4178-82(2017) Standard Practice for Calibrating Moisture Analyzers

D6138-19 Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)

D5622-17 Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis

D7591-12(2017) Standard Test Method for Determination of Free and Total Glycerin in Biodiesel Blends by Anion Exchange Chromatography

D6335-19 Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test

D7620-10(2020) Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection

D8097-17e1 Standard Test Method for Determination of Bulk Density for Specific Size Fractions of Calcined Petroleum Coke Using a Transaxial Pressure Pycnometer

D8236-18 Standard Practice for Preparing an Equilibrium Liquid/Vapor Sample of Live Crude Oil, Condensates, or Liquid Petroleum Products Using a Manual Piston Cylinder for Subsequent Liquid Analysis or Gas Analysis

D1833-87(2017) Standard Test Method for Odor of Petroleum Wax

D6732-04(2020) Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry

D2510-94(2017) Standard Test Method for Adhesion of Solid Film Lubricants

D2008-12(2018) Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products

D1747-09(2019) Standard Test Method for Refractive Index of Viscous Materials

D2881-19 Standard Classification for Metalworking Fluids and Related Materials

D7344-17a Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure (Mini Method)

D8045-17e1 Standard Test Method for Acid Number of Crude Oils and Petroleum Products by Catalytic Thermometric Titration

D7152-11(2016)e1 Standard Practice for Calculating Viscosity of a Blend of Petroleum Products

D7590-09(2014) Standard Guide for Measurement of Remaining Primary Antioxidant Content In In-Service Industrial Lubricating Oils by Linear Sweep Voltammetry

D4055-04(2019) Standard Test Method for Pentane Insolubles by Membrane Filtration

D7718-11(2019) Standard Practice for Obtaining In-Service Samples of Lubricating Grease

D7467-20a Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)

D7918-17a Standard Test Method for Measurement of Flow Properties and Evaluation of Wear, Contaminants, and Oxidative Properties of Lubricating Grease by Die Extrusion Method and Preparation

C1025-15(2020) Standard Test Method for Modulus of Rupture in Bending of Electrode Graphite

D565-99(2019) Standard Test Method for Carbonizable Substances in White Mineral Oil

D5986-96(2019) Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C8–C12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy

D2532-17 Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants

D2155-18 Standard Test Method for Determination of Fire Resistance of Aircraft Hydraulic Fluids by Autoignition Temperature

D7994-17 Standard Test Method for Total Fluorine, Chlorine, and Sulfur in Liquid Petroleum Gas (LPG) by Oxidative Pyrohydrolytic Combustion Followed by Ion Chromatography Detection (Combustion Ion Chromatography-CIC)

D5864-18 Standard Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components

D6744-06(2017)e1 Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique

D3607-08(2016) Standard Test Method for Removing Volatile Contaminants from Used Engine Oils by Stripping

D6184-17 Standard Test Method for Oil Separation from Lubricating Grease (Conical Sieve Method)

D2502-14(2019)e1 Standard Test Method for Estimation of Mean Relative Molecular Mass of Petroleum Oils from Viscosity Measurements

D2714-94(2019) Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine

D4953-20 Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)

D7343-20 Standard Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants

D6822-12b(2017) Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method

D2157-18 Standard Test Method for Effect of Air Supply on Smoke Density in Flue Gases from Burning Distillate Fuels

D5305-18e1 Standard Test Method for Determination of Ethyl Mercaptan in LP-Gas Vapor

D6624-20 Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data

D8092-17 Standard Test Method for Field Determination of Kinematic Viscosity Using a Microchannel Viscometer

D4042-93(2019) Standard Test Method for Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of Rolling Oils

D5760-19 Standard Specification for Performance of Manual Transmission Gear Lubricants

D7212-13(2018) Standard Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter

D8011-19 Standard Specification for Natural Gasoline as a Blendstock in Ethanol Fuel Blends or as a Denaturant for Fuel Ethanol

D8127-17e1 Standard Test Method for Coupled Particulate and Elemental Analysis using X-ray Fluorescence (XRF) for In-Service Lubricants

D6439-11(2017) Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems

D2789-95(2016) Standard Test Method for Hydrocarbon Types in Low Olefinic Gasoline by Mass Spectrometry

D8145-18 Standard Practice for Sampling of Green Petroleum Coke

D5133-20a Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique

D6352-19e1 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 °C to 700 °C by Gas Chromatography

D2426-19 Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography

D6227-18 Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component

D2603-20 Standard Test Method for Sonic Shear Stability of Polymer-Containing Oils

D7544-12(2017) Standard Specification for Pyrolysis Liquid Biofuel

D2319/D2319M-20 Standard Test Method for Softening Point of Pitch (Cube-in-Air Method)

D2001-07(2017) Standard Test Method for Depentanization of Gasoline and Naphthas

D7593-14 Standard Test Method for Determination of Fuel Dilution for In-Service Engine Oils by Gas Chromatography

D2782-20 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method)

D7317-07(2019) Standard Test Method for Coagulated Pentane Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method)

D483-04(2018) Standard Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils

D4746-20 Standard Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration

D4893-20 Standard Test Method for Determination of Pitch Volatility

D8267-19a Standard Test Method for Determination of Total Aromatic, Monoaromatic and Diaromatic Content of Aviation Turbine Fuels Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)

D4682-18 Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants

D7280-20 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch by Stainless Steel Crucible Filtration

D7901-20 Standard Specification for Dimethyl Ether for Fuel Purposes

D7455-19 Standard Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis

D7095-17 Standard Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip

D8120-17 Standard Test Method for Ferrous Debris Quantification

D8323-20 Standard Guide for Management of In-Service Phosphate Ester-based Fluids for Steam Turbine Electro-Hydraulic Control (EHC) Systems

D6424-04a(2019) Standard Practice for Octane Rating Naturally Aspirated Spark Ignition Aircraft Engines

D7753-12(2020) Standard Test Method for Hydrocarbon Types and Benzene in Light Petroleum Distillates by Gas Chromatography

D8029-18 Standard Specification for Biodegradable, Low Aquatic Toxicity Hydraulic Fluids

C1039-85(2020)e1 Standard Test Methods for Apparent Porosity, Apparent Specific Gravity, and Bulk Density of Graphite Electrodes

D943-20 Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils

C783-85(2020) Standard Practice for Core Sampling of Graphite Electrodes

D7666-12(2019) Standard Specification for Triglyceride Burner Fuel

C625-15(2021) Standard Practice for Reporting Irradiation Results on Graphite

C808-75(2021) Standard Guide for Reporting Friction and Wear Test Results of Manufactured Carbon and Graphite Bearing and Seal Materials

C565-15(2021) Standard Test Methods for Tension Testing of Carbon and Graphite Mechanical Materials

D6596-00(2021) Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials

D8075-16(2021) Standard Guide for Categorization of Microstructural and Microtextural Features Observed in Optical Micrographs of Graphite

D1218-21 Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids

D5845-21 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy

D7963-21 Standard Test Method for Determination of Contamination Level of Fatty Acid Methyl Esters in Middle Distillate and Residual Fuels Using Flow Analysis by Fourier Transform Infrared Spectroscopy—Rapid Screening Method

D7348-21 Standard Test Methods for Loss on Ignition (LOI) of Solid Combustion Residues

D7904-21 Standard Test Method for Determination of Water Vapor (Moisture Concentration) in Natural Gas by Tunable Diode Laser Spectroscopy (TDLAS)

D4625-21 Standard Test Method for Middle Distillate Fuel Storage Stability at 43 °C (110 °F)

D7717-11(2021) Standard Practice for Preparing Volumetric Blends of Denatured Fuel Ethanol and Gasoline Blendstocks for Laboratory Analysis

D7690-11(2021) Standard Practice for Microscopic Characterization of Particles from In-Service Lubricants by Analytical Ferrography

D7919-14(2021) Standard Guide for Filter Debris Analysis (FDA) Using Manual or Automated Processes

E1690-08(2021) Standard Test Method for Determination of Ethanol Extractives in Biomass

D5442-17(2021) Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography

D7670-10(2021) Standard Practice for Processing In-service Fluid Samples for Particulate Contamination Analysis Using Membrane Filters

D4307-17(2021) Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards

C662-16(2021) Standard Specification for Impervious Graphite Pipe and Threading

D4998-13(2021) Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids

D4693-07(2021) Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings

D976-21 Standard Test Method for Calculated Cetane Index of Distillate Fuels

D3339-21 Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration

D4737-21 Standard Test Method for Calculated Cetane Index by Four Variable Equation

D7321-21 Standard Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration

D8126-21 Standard Test Method for Efficient Basicity Determination by Potentiometric Hydrochloric Acid Titration

D2624-21a Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels

D7154-15(2021)e1 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)

D2896-21 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration

C1179-21 Standard Test Method for Oxidation Mass Loss of Manufactured Carbon and Graphite Materials in Air

D3606-21 Standard Test Method for Determination of Benzene and Toluene in Spark Ignition Fuels by Gas Chromatography

D7098-21 Standard Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B

D7301-21 Standard Specification for Nuclear Graphite Suitable for Components Subjected to Low Neutron Irradiation Dose

D7542-21 Standard Test Method for Air Oxidation of Carbon and Graphite in the Kinetic Regime

D7922-21 Standard Test Method for Determination of Glycol for In-Service Engine Oils by Gas Chromatography

D6823-08(2021) Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils

D6895-21 Standard Test Method for Rotational Viscosity of Heavy Duty Diesel Drain Oils at 100 °C

D3527-21 Standard Test Method for Life Performance of Automotive Wheel Bearing Grease

D4150-21b Standard Terminology Relating to Gaseous Fuels

D8414/D8414M-21 Standard Test Method for Measurement of Jet Cup Attrition Index of Catalytic Materials

D7940-21 Standard Practice for Analysis of Liquefied Natural Gas (LNG) by Fiber-Coupled Raman Spectroscopy

D1401-21 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids

D2799-21 Standard Test Method for Microscopical Determination of the Maceral Composition of Coal

D2013/D2013M-21 Standard Practice for Preparing Coal Samples for Analysis

D7667-21 Standard Test Method for Determination of Corrosiveness to Silver by Automotive Spark-Ignition Engine Fuel—Thin Silver Strip Method

D7671-21 Standard Test Method for Corrosiveness to Silver by Automotive Spark–Ignition Engine Fuel–Silver Strip Method

D8340-21 Standard Practice for Performance-Based Qualification of Spectroscopic Analyzer Systems

D5291-21 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants

D8420-21 Standard Test Method for Wax Appearance Temperature and Wax Disappearance Temperature of Petroleum Products and Liquid Fuels

D7398-21 Standard Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100 °C to 615 °C by Gas Chromatography

D7775-21 Standard Guide for Measurements on Small Graphite Specimens

D2699-21 Standard Test Method for Research Octane Number of Spark-Ignition Engine Fuel

D7042-21a Standard Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)

D4606-21 Standard Test Method for Determination of Arsenic and Selenium in Coal by the Hydride Generation/Atomic Absorption Method

D6357-21b Standard Test Methods for Determination of Trace Elements in Coal, Coke, and Combustion Residues from Coal Utilization Processes by Inductively Coupled Plasma Atomic Emission Spectrometry, Inductively Coupled Plasma Mass Spectrometry, and Graphite Fur

D217-21a Standard Test Methods for Cone Penetration of Lubricating Grease

D445-21e1 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

D3700-21 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder

D5969-21 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments

D4291-21 Standard Test Method for Trace Ethylene Glycol in Used Engine Oil

D2268-21 Standard Test Method for Analysis of High-Purity n-Heptane and Isooctane by Capillary Gas Chromatography

D5441-21 Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography

D5134-21 Standard Test Method for Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography

D6160-21 Standard Test Method for Determination of Polychlorinated Biphenyls (PCBs) in Waste Materials by Gas Chromatography

D7223-21 Standard Specification for Aviation Certification Turbine Fuel

D7059-21 Standard Test Method for Determination of Methanol in Crude Oils by Multidimensional Gas Chromatography

D7796-21 Standard Test Method for Analysis of Ethyl tert-Butyl Ether (ETBE) by Gas Chromatography

D7235-21a Standard Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices

D4814-21c Standard Specification for Automotive Spark-Ignition Engine Fuel

D4294-21 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry

D7043-21 Standard Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump

D7278-21 Standard Guide for Prediction of Analyzer Sample System Lag Times

D2622-21 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry

D8412-21 Standard Guide for Quantification of Microbial Contamination in Liquid Fuels and Fuel-Associated Water by Quantitative Polymerase Chain Reaction (qPCR)

D7650-21 Standard Practice for Sampling of Particulate Matter in High Pressure Gaseous Fuels with an In-Stream Filter

D2639/D2639M-21a Standard Test Method for Plastic Properties of Coal by the Constant-Torque Gieseler Plastometer

D6668-21 Standard Test Method for Discrimination Between Flammability Ratings of F = 0 and F = 1

D5483-21 Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry

D7826-21 Standard Guide for Evaluation of New Aviation Gasolines and New Aviation Gasoline Additives

D5263-21 Standard Test Method for Determining the Relative Degree of Oxidation in Bituminous Coal by Alkali Extraction

D3682-21 Standard Test Method for Major and Minor Elements in Combustion Residues from Coal Utilization Processes by Atomic Spectrometry

D1831-21 Standard Test Method for Roll Stability of Lubricating Grease

D6584-21 Standard Test Method for Determination of Total Monoglycerides, Total Diglycerides, Total Triglycerides, and Free and Total Glycerin in B-100 Biodiesel Methyl Esters by Gas Chromatography

D7412-21 Standard Test Method for Condition Monitoring of Phosphate Antiwear Additives in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

D7415-21 Standard Test Method for Condition Monitoring of Sulfate By-Products in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

D7414-21 Standard Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

D7418-21 Standard Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring

D7624-21 Standard Test Method for Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry

D2783-21 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)

D4172-21 Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method)

D7945-21a Standard Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Constant Pressure Viscometer

D5183-21a Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine

D6200-21 Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis

D6482-21 Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)

D6710-21 Standard Guide for Evaluation of Hydrocarbon-Based Quench Oil

D8046-21 Standard Guide for Pumpability of Heat Transfer Fluids

D4289-21 Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids

D7846-21 Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Graphites

D2878-21 Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils

D4056-21 Standard Test Method for Estimation of Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants

D8434-21 Standard Specification for Unleaded Aviation Gasoline Test Fuel Containing Organo-metallic Additive

D8368-22 Standard Test Method for Determination of Totals of Aromatic, Polyaromatic and Fatty Acid Methyl Esters (FAME) Content of Diesel Fuel Using Gas Chromatography with Vacuum Ultraviolet Absorption Spectroscopy Detection (GC-VUV)

D8428-21 Standard Guide for Establishing Analyst Competence to Perform a Test Method

D2700-22 Standard Test Method for Motor Octane Number of Spark-Ignition Engine Fuel

D4815-22 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography

D5599-22 Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection

D2265-22 Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range

D6081-22 Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation

D6139-22 Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or Their Components Using the Gledhill Shake Flask

D6224-22 Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment

D6384-22 Standard Terminology Relating to Biodegradability and Ecotoxicity of Lubricants

D6731-22 Standard Test Method for Determining the Aerobic, Aquatic Biodegradability of Lubricants or Lubricant Components in a Closed Respirometer

D6709-22 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine)

D7216-22 Standard Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers

D5704-22 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles

D7422-22 Standard Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine

D7501-22 Standard Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel Fuel Blendstock (B100) by Cold Soak Filtration Test (CSFT)

D8074-22 Standard Test Method for Evaluation of Diesel Engine Oils in DD13 Diesel Engine

D8413-22 Standard Guide for Measuring the Water Pore Volume of Catalytic Materials by Centrifuge

D5966-22 Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine

D7153-22 Standard Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)

D8256-22a Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in the Sequence VH Spark-Ignition Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions

D4054-22 Standard Practice for Evaluation of New Aviation Turbine Fuels and Fuel Additives

D4871-11(2022) Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus

D7528-22 Standard Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus

D8148-22 Standard Test Method for Spectroscopic Determination of Haze in Fuels

D8396-22 Standard Test Method for Group Types Quantification of Hydrocarbons in Hydrocarbon Liquids with a Boiling Point between 36 °C and 343 °C by Flow Modulated GCxGC – FID

D7685-11(2022) Standard Practice for In-Line, Full Flow, Inductive Sensor for Ferromagnetic and Non-ferromagnetic Wear Debris Determination and Diagnostics for Aero-Derivative and Aircraft Gas Turbine Engine Bearings

D7795-15(2022)e1 Standard Test Method for Acidity in Ethanol and Ethanol Blends by Titration

D5186-22 Standard Test Method for Determination of the Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels By Supercritical Fluid Chromatography

D6296-22 Standard Test Method for Total Olefins in Spark-ignition Engine Fuels by Multidimensional Gas Chromatography

D4175-22 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants

D8447-22e1 Standard Test Method for Determination of Turbo Charger Deposits by Thermo-Oxidation Engine Oil Simulation Test

D5709-22 Standard Test Method for Sieve Analysis of Petroleum Coke

D6374-22 Standard Test Method for Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure

D6791-22 Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke

D8088-16(2022) Standard Practice for Determination of the Six Major Rare Earth Elements in Fluid Catalytic Cracking Catalysts, Zeolites, Additives, and Related Materials by Inductively Coupled Plasma Optical Emission Spectroscopy

D7915-22 Standard Practice for Application of Generalized Extreme Studentized Deviate (GESD) Technique to Simultaneously Identify Multiple Outliers in a Data Set

D6299-22 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance

D7548-22 Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products

D8128-22 Standard Guide for Monitoring Failure Mode Progression in Industrial Applications with Rolling Element Ball Type Bearings

D909-22 Standard Test Method for Supercharge Rating of Spark-Ignition Aviation Gasoline

D4052-22 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter

D381-22 Standard Test Method for Gum Content in Fuels by Jet Evaporation

D6468-22 Standard Test Method for High Temperature Stability of Middle Distillate Fuels

D7109-22 Standard Test Method for Shear Stability of Polymer-Containing Fluids Using a European Diesel Injector Apparatus at 30 Cycles and 90 Cycles

D8112-22 Standard Guide for Obtaining In-Service Samples of Turbine Operation Related Lubricating Fluid

D1748-22 Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet

D8455-22 Standard Test Method for Speciated Siloxane GC-IMS Analyzer Based On-line for Siloxane and Trimethylsilanol Content of Gaseous Fuels

D2272-22 Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel

D6021-22 Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection

D6277-07(2022) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy

D7619-22 Standard Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter

D8073-22 Standard Test Method for Determination of Water Separation Characteristics of Aviation Turbine Fuel by Small Scale Water Separation Instrument

D1743-22 Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases

D4596-22 Standard Practice for Collection of Channel Samples of Coal in a Mine

D7778-15(2022)e1 Standard Guide for Conducting an Interlaboratory Study to Determine the Precision of a Test Method

D5192/D5192M-22 Standard Practice for Collection of Coal Samples from Core

D8321-22 Standard Practice for Development and Validation of Multivariate Analyses for Use in Predicting Properties of Petroleum Products, Liquid Fuels, and Lubricants based on Spectroscopic Measurements

D6122-22 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, Field and Laboratory Infrared Spectrophotometer, and Raman Spectrometer Based Analyzer Systems

D7453-22 Standard Practice for Sampling of Petroleum Products for Analysis by Process Stream Analyzers and for Process Stream Analyzer System Validation

D7808-22 Standard Practice for Determining the Site Precision of a Process Stream Analyzer on Process Stream Material

D4057-22 Standard Practice for Manual Sampling of Petroleum and Petroleum Products

D5579-19e1 Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test

D5968-19ae1 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121 °C

D6594-20e1 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135 °C

D6121-19ae1 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles

D6745-22 Standard Test Method for Linear Thermal Expansion of Electrode Carbons

D6750-19e1 Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)

D6557-18e1 Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils

D6794-20e1 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6 h) Heating Time

D6593-18e1 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions

D6795-19ae1 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30 min) Heating Time

D6891-21e1 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine

D8351-22 Standard Test Method for Determination of Trace Elements in Biodiesel and Biodiesel Blends by Microwave Plasma Atomic Emission Spectrometry (MP-AES)

D7452-19e1 Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading

D7589-16e1 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine

D8047-19e1 Standard Test Method for Evaluation of Engine Oil Aeration Resistance in a Caterpillar C13 Direct-Injected Turbocharged Automotive Diesel Engine

D8048-21ae1 Standard Test Method for Evaluation of Diesel Engine Oils in T-13 Diesel Engine

D6984-18e1 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine

D7320-18e1 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine

D3764-22 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems

D5954-22 Standard Test Method for Mercury Sampling and Measurement in Gaseous Fuels by Atomic Absorption Spectroscopy

D8111-21ae1 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIH, Spark-Ignition Engine

D8226-21ae1 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIF Spark Ignition Engine

D8291-21ae1 Standard Test Method for Evaluation of Performance of Automotive Engine Oils in the Mitigation of Low-Speed, Preignition in the Sequence IX Gasoline Turbocharged Direct-Injection, Spark-Ignition Engine

D7675-22 Standard Test Method for Determination of Total Hydrocarbons in Hydrogen by FID-Based Total Hydrocarbon (THC) Analyzer

D7892-22 Standard Test Method for Determination of Total Organic Halides, Total Non-Methane Hydrocarbons, and Formaldehyde in Hydrogen Fuel by Gas Chromatography/Mass Spectrometry

D6849-22 Standard Practice for Storage and Use of Liquefied Petroleum Gases (LPG) in Sample Cylinders for LPG Test Methods

D6559-22 Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks

D7038-22a Standard Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants

D7468-22 Standard Test Method for Cummins ISM Test

D4310-22 Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils

D6558-22 Standard Test Method for Determination of TGA CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks

D5763-22 Standard Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware

E1705-15(2022) Standard Terminology Relating to Biotechnology

D7873-22 Standard Test Method for Determination of Oxidation Stability and Insolubles Formation of Inhibited Turbine Oils at 120 °C Without the Inclusion of Water (Dry TOST Method)

D8165-22 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Used in Hypoid Final-Drive Axles Operated under Low-Speed and High-Torque Conditions

D473-22 Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method

D1657-22 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer

D1655-22 Standard Specification for Aviation Turbine Fuels

D6351-22 Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids

D6560-22 Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products

D56-22 Standard Test Method for Flash Point by Tag Closed Cup Tester

D1835-22 Standard Specification for Liquefied Petroleum (LP) Gases

D4171-22 Standard Specification for Fuel System Icing Inhibitors

D6810-22 Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry

D8183-22 Standard Test Method for Determination of Indicated Cetane Number (ICN) of Diesel Fuel Oils using a Constant Volume Combustion Chamber—Reference Fuels Calibration Method

D2983-22 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer

D7566-22 Standard Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons

D7844-22 Standard Test Method for Condition Monitoring of Soot in In-Service Lubricants by Trend Analysis using Fourier Transform Infrared (FT-IR) Spectrometry

D1322-22 Standard Test Method for Smoke Point of Kerosene and Aviation Turbine Fuel

D4378-22 Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam, Gas, and Combined Cycle Turbines

D1977-22 Standard Test Method for Nickel and Vanadium in FCC Equilibrium Catalysts by Hydrofluoric/Sulfuric Acid Decomposition and Atomic Spectroscopic Analysis

D6761-22a Standard Test Method for Determination of the Total Pore Volume of Catalysts and Catalyst Carriers

D8210-22 Standard Test Method for Automatic Determination of Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants Using a Rotational Viscometer

D3610-22 Standard Test Method for Total Cobalt in Alumina-Base Cobalt-Molybdenum Catalyst by Potentiometric Titration Method

D7847-22 Standard Guide for Interlaboratory Studies for Microbiological Test Methods

D2320-98(2022)e1 Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)

D4715-98(2022)e1 Standard Test Method for Coking Value of Tar and Pitch (Alcan)

D5949-16(2022) Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)

D7371-14(2022) Standard Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)

D7755-11(2022) Standard Practice for Determining the Wear Volume on Standard Test Pieces Used by High-Frequency, Linear-Oscillation (SRV) Test Machine

D4179-22 Standard Test Method for Single Pellet Crush Strength of Formed Catalysts and Catalyst Carriers

D4512-22 Standard Test Method for Vibrated Apparent Packing Density of Fine Catalyst and Catalyst Carrier Particles and Powder

D6615-22 Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel

D6792-22 Standard Practice for Quality Management Systems in Petroleum Products, Liquid Fuels, and Lubricants Testing Laboratories

D7261-22 Standard Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer

D7665-22 Standard Guide for Evaluation of Biodegradable Heat Transfer Fluids

D7863-22 Standard Guide for Evaluation of Convective Heat Transfer Coefficient of Liquids

D8275-22 Standard Specification for Gasoline-like Test Fuel for Compression-Ignition Engines

D4860-22 Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating)

D5002-22 Standard Test Method for Density, Relative Density, and API Gravity of Crude Oils by Digital Density Analyzer

D873-22 Standard Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method)

D2709-22 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge

D5153-22 Standard Test Method for Palladium in Molecular Sieve Catalyst by Atomic Absorption Spectrophotometry

D8009-22 Standard Practice for Manual Piston Cylinder Sampling for Volatile Crude Oils, Condensates, and Liquid Petroleum Products

D4177-22 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products

D7442-22 Standard Practice for Sample Preparation of Fluid Catalytic Cracking Catalysts, Catalytic Materials, and Zeolites for Elemental Analysis by Inductively Coupled Plasma Optical Emission Spectroscopy

D8470-22 Standard Practice for Development and Implementation of Instrument Performance Tests for Use on Multivariate Online, At-Line and Laboratory Spectroscopic Based Analyzer Systems

D8385-22 Standard Test Method for Dry Filterability of Lubricants and Hydraulic Fluids by Mass Flow Technique

D6378-22 Standard Test Method for Determination of Vapor Pressure (VPX) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)

D5769-22 Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry

D5191-22 Standard Test Method for Vapor Pressure of Petroleum Products and Liquid Fuels (Mini Method)

D4048-22 Standard Test Method for Detection of Copper Corrosion from Lubricating Grease

D7157-22e1 Standard Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (n-Heptane Phase Separation; Optical Detection)

D8350-22 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVB Spark-Ignition Engine

D8279-22a Standard Test Method for Determination of Timing-Chain Wear in a Turbocharged, Direct-Injection, Spark-Ignition, Four-Cylinder Engine

D2276-22 Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling

D3240-22a Standard Test Method for Undissolved Water In Aviation Turbine Fuels

D5515-22 Standard Test Method for Determination of the Swelling Properties of Bituminous Coal Using a Dilatometer

D3302/D3302M-22 Standard Test Method for Total Moisture in Coal

D6973-14(2019)e1 Standard Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump

D8114-22a Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIE Spark Ignition

D2887-22 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography

E3050-22 Standard Specification for Denatured Ethanol for Use as Cooking and Appliance Fuel

D8392-22 Standard Practice for Calibration and Verification of Direct Imaging Analyzers Used for Particle Size and Shape Analysis of Catalytic Materials

D720/D720M-22 Standard Test Method for Free-Swelling Index of Coal