G46-21 Standard Guide for Examination and Evaluation of Pitting Corrosion

E1823-21 Standard Terminology Relating to Fatigue and Fracture Testing

G37-98(2021) Standard Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress-Corrosion Cracking Susceptibility of Copper-Zinc Alloys

E415-21 Standard Test Method for Analysis of Carbon and Low-Alloy Steel by Spark Atomic Emission Spectrometry

E389-21 Standard Test Method for Particle Size or Screen Analysis at 4.75 mm (No.4) Sieve and Coarser for Metal-Bearing Ores and Related Materials

E1898-21 Standard Test Method for Determination of Silver in Copper Concentrates by Flame Atomic Absorption Spectrometry

E1184-21 Standard Practice for Determination of Elements by Graphite Furnace Atomic Absorption Spectrometry

E2242-21 Standard Test Method for Column Percolation Extraction of Mine Rock by the Meteoric Water Mobility Procedure

E877-21 Standard Practice for Sampling and Sample Preparation of Iron Ores and Related Materials for Determination of Chemical Composition and Physical Properties

E840-95(2021)e1 Standard Practice for Using Flame Photometric Detectors in Gas Chromatography

E246-21 Standard Test Methods for Determination of Iron in Iron Ores and Related Materials by Dichromate Titrimetry

E2294-21 Standard Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates, and Related Materials by Fire Assay Gravimetry

E1805-21 Standard Test Method for Determination of Gold in Copper Concentrates by Fire Assay Gravimetry

E508-21 Standard Test Method for Determination of Calcium and Magnesium in Iron Ores by Flame Atomic Absorption Spectrometry

E507-21 Standard Test Method for Determination of Aluminum in Iron Ores by Flame Atomic Absorption Spectrometry

E463-21 Standard Test Method for Determination of Silica in Fluorspar by Silico-Molybdate Visible Spectrophotometry

E278-21 Standard Test Method for Determination of Phosphorus in Iron Ores by Phosphomolybdate Coprecipitation and Nitric Acid Titrimetry

E247-21 Standard Test Method for Determination of Silica in Manganese Ores, Iron Ores, and Related Materials by Gravimetry

G39-99(2021) Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens

G186-05(2021) Standard Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause Stress Corrosion Cracking of Brass Alloys

E6-15e4 Standard Terminology Relating to Methods of Mechanical Testing

E21-20 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials

G119-09(2021) Standard Guide for Determining Synergism Between Wear and Corrosion

G196-08(2021) Standard Test Method for Galling Resistance of Material Couples

E192-20 Standard Reference Radiographs of Investment Steel Castings for Aerospace Applications

E494-20 Standard Practice for Measuring Ultrasonic Velocity in Materials by Comparative Pulse-Echo Method

E2699-20 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Digital Radiographic (DR) Test Methods

A348/A348M-05(2021) Standard Test Method for Alternating Current Magnetic Properties of Materials Using the Wattmeter-Ammeter-Voltmeter Method, 100 to 10 000 Hz and 25-cm Epstein Frame

E446-20 Standard Reference Radiographs for Steel Castings Up to 2 in. (50.8 mm) in Thickness

E1165-20 Standard Test Method for Measurement of Focal Spots of Industrial X-Ray Tubes by Pinhole Imaging

E1453-20 Standard Guide for Storage of Magnetic Tape Media that Contains Analog or Digital Radioscopic Data

G50-20 Standard Practice for Conducting Atmospheric Corrosion Tests on Metals

E382-20 Standard Test Method for Determination of Crushing Strength of Iron Ore Pellets and Direct-Reduced Iron

E2905/E2905M-20 Standard Practice for Examination of Mill and Kiln Girth Gear Teeth—Electromagnetic Methods

E1237-20 Standard Guide for Installing Bonded Resistance Strain Gages

E1915-20 Standard Test Methods for Analysis of Metal Bearing Ores and Related Materials for Carbon, Sulfur, and Acid-Base Characteristics

E837-20 Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method

E273-20 Standard Practice for Ultrasonic Testing of the Weld Zone of Welded Pipe and Tubing

G105-20 Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests

G200-20 Standard Test Method for Measurement of Oxidation-Reduction Potential (ORP) of Soil

G220-20 Standard Practice for Replacing Saturated Calomel Reference Electrode (SCE) for Measuring Electrode Potentials

E803-20 Standard Test Method for Determining the L/D Ratio of Neutron Radiography Beams

G57-20 Standard Test Method for Measurement of Soil Resistivity Using the Wenner Four-Electrode Method

E3039-20 Standard Test Method for Determination of Crack-Tip-Opening Angle of Ferritic Steels Using DWTT-Type Specimens

E390-20 Standard Reference Radiographs for Steel Fusion Welds

E251-20a Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages

E1955-20 Standard Radiographic Examination for Soundness of Welds in Steel by Comparison to Graded ASTM Reference Radiographs

E279-18 Standard Test Method for Determination of Abrasion Resistance of Iron Ore Pellets, Lump, and Sinter by the Tumbler Test

E3168-20a Standard Practice for Determining Low-Contrast Visual Acuity of Radiographic Interpreters

E1685-20 Standard Practice for Measuring the Change in Length of Bolts Using the Ultrasonic Pulse-Echo Technique

E999-20 Standard Guide for Controlling the Quality of Industrial Radiographic Film Processing

E426-16(2021) Standard Practice for Electromagnetic (Eddy Current) Examination of Seamless and Welded Tubular Products, Titanium, Austenitic Stainless Steel and Similar Alloys

E604-18 Standard Test Method for Dynamic Tear Testing of Metallic Materials

A721/A721M-02(2021) Standard Test Method for Ductility of Oriented Electrical Steel

E1106-12(2021) Standard Test Method for Primary Calibration of Acoustic Emission Sensors

E2930-13(2021) Standard Practice for Pressure Decay Leak Test Method

A720/A720M-02(2021) Standard Test Method for Ductility of Nonoriented Electrical Steel

E1312-18 Standard Practice for Electromagnetic (Eddy Current) Examination of Ferromagnetic Cylindrical Bar Product Above the Curie Temperature

E243-18 Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Copper-Alloy Tubes

E2479-16(2021) Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (LCR) Waves

G218-19 Standard Guide for External Corrosion Protection of Ductile Iron Pipe Utilizing Polyethylene Encasement Supplemented by Cathodic Protection

E406-19 Standard Practice for Using Controlled Atmospheres in Atomic Emission Spectrometry

E2465-19 Standard Test Method for Analysis of Ni-Base Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry

G32-16(2021)e1 Standard Test Method for Cavitation Erosion Using Vibratory Apparatus

E1077-14(2021) Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens

E2207-15(2021) Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens

A801-21 Standard Specification for Wrought Iron-Cobalt High Magnetic Saturation Alloys (UNS R30005 and K92650)

E328-21 Standard Test Methods for Stress Relaxation for Materials and Structures

E127-20 Standard Practice for Fabrication and Control of Flat Bottomed Hole Ultrasonic Standard Reference Blocks

E372-21 Standard Test Method for Determination of Calcium and Magnesium in Magnesium Ferrosilicon by EDTA Titrimetry

E2534-20 Standard Practice for Targeted Defect Detection Using Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts

A596/A596M-21 Standard Test Method for Direct-Current Magnetic Properties of Materials Using the Point by Point (Ballistic) Method and Ring Specimens

E2860-20 Standard Test Method for Residual Stress Measurement by X-Ray Diffraction for Bearing Steels

E143-20 Standard Test Method for Shear Modulus at Room Temperature

A753-21 Standard Specification for Wrought Nickel-Iron Soft Magnetic Alloys (UNS K94490, K94840, N14076, N14080)

E114-20 Standard Practice for Ultrasonic Pulse-Echo Straight-Beam Contact Testing

A342/A342M-21 Standard Test Methods for Permeability of Weakly Magnetic Materials

E1114-20 Standard Test Method for Determining the Size of Iridium-192, Cobalt-60, and Selenium-75 Industrial Radiographic Sources

E436-03(2021) Standard Test Method for Drop-Weight Tear Tests of Ferritic Steels

E32-21 Standard Practices for Sampling Ferroalloys and Steel Additives for Determination of Chemical Composition

E467-21 Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System

R0006 Condensed Metric Practice Guide for Corrosion (This is not an ASTM Publication)

E305-21 Standard Practice for Establishing and Controlling Spark Atomic Emission Spectrochemical Analytical Curves

E572-21 Standard Test Method for Analysis of Stainless and Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry

E2982-21 Standard Guide for Nondestructive Examination of Thin-Walled Metallic Liners in Filament-Wound Pressure Vessels Used in Aerospace Applications

G129-21 Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking

E3267-21 Standard Guide for Building Information Models and Archiving for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)

G44-21 Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5 % Sodium Chloride Solution

R0071 Standard Method of Test for Exfoliation Corrosion Susceptibility in 7XXX Series Copper-Containing Aluminum Alloys (Exco Test) (This is not an approved ASTM standard; available as PDF, only)

A839-15 Standard Specification for Iron-Phosphorus Powder Metallurgy Parts for Soft Magnetic Applications

E2310-04(2015) Standard Guide for Use of Spectral Searching by Curve Matching Algorithms with Data Recorded Using Mid-Infrared Spectroscopy

E606/E606M-21 Standard Test Method for Strain-Controlled Fatigue Testing

E643-15 Standard Test Method for Ball Punch Deformation of Metallic Sheet Material

E1161-21 Standard Practice for Radiographic Examination of Semiconductors and Electronic Components

E1030/E1030M-21 Standard Practice for Radiographic Examination of Metallic Castings

G204-21 Standard Test Method for Damage to Contacting Solid Surfaces under Fretting Conditions

E1600-15 Standard Test Methods for Determination of Gold in Cyanide Solutions

E1127-08(2015) Standard Guide for Depth Profiling in Auger Electron Spectroscopy

E317-21 Standard Practice for Evaluating Performance Characteristics of Ultrasonic Pulse-Echo Testing Instruments and Systems without the Use of Electronic Measurement Instruments

E1523-15 Standard Guide to Charge Control and Charge Referencing Techniques in X-Ray Photoelectron Spectroscopy

E466-21 Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials

E1324-21 Standard Guide for Measuring Some Electronic Characteristics of Ultrasonic Testing Instruments

E738-20 Standard Test Method for Determination of Aluminum in Iron Ores and Related Materials by EDTA Complexometric Titrimetry

E2218-15 Standard Test Method for Determining Forming Limit Curves

G106-89(2015) Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements

E2142-08(2015) Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope

E709-21 Standard Guide for Magnetic Particle Testing

E878-20 Standard Test Method for Determination of Titanium in Iron Ores and Related Materials by Diantipyrylmethane Ultraviolet Spectrophotometry

G108-94(2015) Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels

E2546-15 Standard Practice for Instrumented Indentation Testing

E3081-21 Standard Practice for Outlier Screening Using Process Compensated Resonance Testing via Swept Sine Input for Metallic and Non-Metallic Parts

E2767-21 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for X-ray Computed Tomography (CT) Test Methods

A1071/A1071M-11(2015) Standard Test Method for Evaluating Hygrothermal Corrosion Resistance of Permanent Magnet Alloys

G35-98(2015) Standard Practice for Determining the Susceptibility of Stainless Steels and Related Nickel-Chromium-Iron Alloys to Stress-Corrosion Cracking in Polythionic Acids

G58-85(2015) Standard Practice for Preparation of Stress-Corrosion Test Specimens for Weldments

E2191/E2191M-16 Standard Practice for Examination of Gas-Filled Filament-Wound Composite Pressure Vessels Using Acoustic Emission

E3023-21 Standard Practice for Probability of Detection Analysis for â Versus a Data

E1949-21 Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages

G31-21 Standard Guide for Laboratory Immersion Corrosion Testing of Metals

E1875-20a Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance

E1319-21 Standard Guide for High-Temperature Static Strain Measurement

E2533-21 Standard Guide for Nondestructive Examination of Polymer Matrix Composites Used in Aerospace Applications

E1257-16 Standard Guide for Evaluating Grinding Materials Used for Surface Preparation in Spectrochemical Analysis

E536-16 Standard Test Methods for Chemical Analysis of Zinc and Zinc Alloys

E520-08(2015)e1 Standard Practice for Describing Photomultiplier Detectors in Emission and Absorption Spectrometry

E855-21 Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading

A683-16 Standard Specification for Nonoriented Electrical Steel, Semiprocessed Types

A677-16 Standard Specification for Nonoriented Electrical Steel Fully Processed Types

E1642-00(2016) Standard Practice for General Techniques of Gas Chromatography Infrared (GC/IR) Analysis

E2077-00(2016) Standard Specification for Analytical Data Interchange Protocol for Mass Spectrometric Data

E2056-04(2016) Standard Practice for Qualifying Spectrometers and Spectrophotometers for Use in Multivariate Analyses, Calibrated Using Surrogate Mixtures

E2567-16a Standard Test Method for Determining Nodularity And Nodule Count In Ductile Iron Using Image Analysis

A773/A773M-21 Standard Test Method for Direct Current Magnetic Properties of Low Coercivity Magnetic Materials Using Hysteresigraphs

E2981-21 Standard Guide for Nondestructive Examination of Composite Overwraps in Filament Wound Pressure Vessels Used in Aerospace Applications

G180-21 Standard Test Method for Corrosion Inhibiting Admixtures for Steel in Concrete by Polarization Resistance in Cementitious Slurries

E2582-21 Standard Practice for Infrared Flash Thermography of Composite Panels and Repair Patches Used in Aerospace Applications

E1411-16 Standard Practice for Qualification of Radioscopic Systems

E1255-16 Standard Practice for Radioscopy

E2078-00(2016) Standard Guide for Analytical Data Interchange Protocol for Mass Spectrometric Data

E248-20 Standard Test Method for Determination of Manganese in Manganese Ores by Pyrophosphate Complexed Permanganate Potentiometric Titrimetry

E478-08(2017) Standard Test Methods for Chemical Analysis of Copper Alloys

E2007-10(2016) Standard Guide for Computed Radiography

E280-21 Standard Reference Radiographs for Heavy-Walled (412 to 12 in. (114 to 305 mm)) Steel Castings

E310-21 Standard Reference Radiographs for Tin Bronze Castings

G188-05(2021) Standard Specification for Leak Detector Solutions Intended for Use on Brasses and Other Copper Alloys

A1101-16 Standard Specification for Sintered and Fully Dense Neodymium Iron Boron (NdFeB) Permanent Magnets

G38-01(2021) Standard Practice for Making and Using C-Ring Stress-Corrosion Test Specimens

G64-99(2021) Standard Classification of Resistance to Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys

E740/E740M-03(2016) Standard Practice for Fracture Testing with Surface-Crack Tension Specimens

E1219-21 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Solvent-Removable Process

E1208-21 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Lipophilic Post-Emulsification Process

E1220-21 Standard Practice for Visible Penetrant Testing Using Solvent-Removable Process

G215-17 Standard Guide for Electrode Potential Measurement

E1450-16 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium

E1418-21 Standard Practice for Visible Penetrant Testing Using the Water-Washable Process

E1210-21 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Hydrophilic Post-Emulsification Process

E995-16 Standard Guide for Background Subtraction Techniques in Auger Electron Spectroscopy and X-Ray Photoelectron Spectroscopy

G99-17 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus

E2093-12(2016) Standard Guide for Optimizing, Controlling and Assessing Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization

E2823-17 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Mass Spectrometry (Performance-Based)

E342-11(2016) Standard Test Method for Determination of Chromium Oxide in Chrome Ores by Permanganate Titrimetry

E2108-16 Standard Practice for Calibration of the Electron Binding-Energy Scale of an X-Ray Photoelectron Spectrometer

E1734-16a Standard Practice for Radioscopic Examination of Castings

E314-16 Standard Test Methods for Determination of Manganese in Iron Ores by Pyrophosphate Potentiometry and Periodate Spectrophotometry Techniques

G205-16 Standard Guide for Determining Emulsion Properties, Wetting Behavior, and Corrosion-Inhibitory Properties of Crude Oils

E1479-16 Standard Practice for Describing and Specifying Inductively Coupled Plasma Atomic Emission Spectrometers

E2775-16 Standard Practice for Guided Wave Testing of Above Ground Steel Pipework Using Piezoelectric Effect Transduction

E1000-16 Standard Guide for Radioscopy

E238-17a Standard Test Method for Pin-Type Bearing Test of Metallic Materials

A848-17 Standard Specification for Low-Carbon Magnetic Iron

G198-17 Standard Test Method for Determining the Relative Corrosion Performance of Driven Fasteners in Contact with Treated Wood

E3061-17 Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance Based Method)

E103-17 Standard Practice for Rapid Indentation Hardness Testing of Metallic Materials

G5-14(2021) Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements

G100-89(2021) Standard Test Method for Conducting Cyclic Galvanostaircase Polarization

G158-98(2021) Standard Guide for Three Methods of Assessing Buried Steel Tanks

E2050-17 Standard Test Method for Determination of Total Carbon in Mold Powders by Combustion

E1587-17 Standard Test Methods for Chemical Analysis of Refined Nickel

G165-99(2017) Standard Practice for Determining Rail-to-Earth Resistance

E465-11(2017) Standard Test Methods for Determination of Manganese (IV) in Manganese Ores by Redox Titrimetry

E1832-08(2017) Standard Practice for Describing and Specifying a Direct Current Plasma Atomic Emission Spectrometer

E81-96(2017) Standard Test Method for Preparing Quantitative Pole Figures

E1180-08(2021) Standard Practice for Preparing Sulfur Prints for Macrostructural Evaluation

E986-04(2017) Standard Practice for Scanning Electron Microscope Beam Size Characterization

E883-11(2017) Standard Guide for Reflected–Light Photomicrography

E1049-85(2017) Standard Practices for Cycle Counting in Fatigue Analysis

E1614-94(2021) Standard Guide for Procedure for Measuring Ionizing Radiation-Induced Attenuation in Silica-Based Optical Fibers and Cables for Use in Remote Fiber-Optic Spectroscopy and Broadband Systems

E1421-99(2021) Standard Practice for Describing and Measuring Performance of Fourier Transform Mid-Infrared (FT-MIR) Spectrometers: Level Zero and Level One Tests

E650/E650M-17 Standard Guide for Mounting Piezoelectric Acoustic Emission Sensors

E439-17 Standard Test Methods for Chemical Analysis of Beryllium

E1791-96(2021) Standard Practice for Transfer Standards for Reflectance Factor for Near-Infrared Instruments Using Hemispherical Geometry

E1139/E1139M-17 Standard Practice for Continuous Monitoring of Acoustic Emission from Metal Pressure Boundaries

E1004-17 Standard Test Method for Determining Electrical Conductivity Using the Electromagnetic (Eddy Current) Method

E1359-17 Standard Guide for Auditing and Evaluating Capabilities of Nondestructive Testing Agencies

E1212-17 Standard Practice for Establishing Quality Management Systems for Nondestructive Testing Agencies

E2642-09(2021) Standard Terminology for Scientific Charge-Coupled Device (CCD) Detectors

E1888/E1888M-17 Standard Practice for Acoustic Emission Examination of Pressurized Containers Made of Fiberglass Reinforced Plastic with Balsa Wood Cores

E1495/E1495M-17 Standard Guide for Acousto-Ultrasonic Assessment of Composites, Laminates, and Bonded Joints

E1211/E1211M-17 Standard Practice for Leak Detection and Location Using Surface-Mounted Acoustic Emission Sensors

E1654-94(2021) Standard Guide for Measuring Ionizing Radiation-Induced Spectral Changes in Optical Fibers and Cables for Use in Remote Raman FiberOptic Spectroscopy

E1653-94(2021) Standard Guide for Specifying Dynamic Characteristics of Optical Radiation Transmitting Fiber Waveguides

E1930/E1930M-17 Standard Practice for Examination of Liquid-Filled Atmospheric and Low-Pressure Metal Storage Tanks Using Acoustic Emission

E2143-01(2021) Standard Test Method for Using Field-Portable Fiber Optics Synchronous Fluorescence Spectrometer for Quantification of Field Samples for Aromatic and Polycyclic Aromatic Hydrocarbons

E543-21 Standard Specification for Agencies Performing Nondestructive Testing

A876-17e1 Standard Specification for Flat-Rolled, Grain-Oriented, Silicon-Iron, Electrical Steel, Fully Processed Types

E499/E499M-11(2017) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Detector Probe Mode

E1304-97(2020) Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials

E2863-17 Standard Practice for Acoustic Emission Examination of Welded Steel Sphere Pressure Vessels Using Thermal Pressurization

E88-11(2017) Standard Practice for Sampling Nonferrous Metals and Alloys in Cast Form for Determination of Chemical Composition

E50-17 Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials

E132-17 Standard Test Method for Poisson’s Ratio at Room Temperature

E1511-93(2017) Standard Practice for Testing Conductivity Detectors Used in Liquid and Ion Chromatography

E1303-95(2017) Standard Practice for Refractive Index Detectors Used in Liquid Chromatography

E1140-95(2017) Standard Practice for Testing Nitrogen/Phosphorus Thermionic Ionization Detectors for Use In Gas Chromatography

E1698-95(2017) Standard Practice for Testing Electrolytic Conductivity Detectors (ELCD) Used in Gas Chromatography

E2869-17 Standard Digital Reference Images for Magnesium Castings

E2624-17 Standard Practice for Torque Calibration of Testing Machines

E797/E797M-21 Standard Practice for Measuring Thickness by Manual Ultrasonic Pulse-Echo Contact Method

E190-21 Standard Test Method for Guided Bend Test for Ductility of Welds

E2580-17 Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications

E1070-17a Standard Test Method for Determination of Phosphorus in Iron Ores by Phospho-Molybdenum-Blue Spectrophotometry

E815-17b Standard Test Method for Determination of Calcium Fluoride in Fluorspar by EDTA Complexometric Titrimetry

G171-03(2017) Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus

G137-97(2017) Standard Test Method for Ranking Resistance of Plastic Materials to Sliding Wear Using a Block-On-Ring Configuration

G168-17 Standard Practice for Making and Using Precracked Double Beam Stress Corrosion Specimens

G176-03(2017) Standard Test Method for Ranking Resistance of Plastics to Sliding Wear Using Block-on-Ring Wear Test—Cumulative Wear Method

E1097-12(2017) Standard Guide for Determination of Various Elements by Direct Current Plasma Atomic Emission Spectrometry

E1950-17 Standard Practice for Reporting Results from Methods of Chemical Analysis

G134-17 Standard Test Method for Erosion of Solid Materials by Cavitating Liquid Jet

G148-97(2018) Standard Practice for Evaluation of Hydrogen Uptake, Permeation, and Transport in Metals by an Electrochemical Technique

E1245-03(2016) Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis

E2658-15 Standard Practices for Verification of Speed for Material Testing Machines

E930-18 Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)

E2617-17 Standard Practice for Validation of Empirically Derived Multivariate Calibrations

E316-17 Standard Test Method for Determination of Iron in Manganese Ores by Hydrogen Sulfide Reduction-Dichromate Titrimetry

E517-19 Standard Test Method for Plastic Strain Ratio r for Sheet Metal

E209-18 Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates

E1815-18 Standard Test Method for Classification of Film Systems for Industrial Radiography

E2903-18 Standard Test Method for Measurement of the Effective Focal Spot Size of Mini and Micro Focus X-ray Tubes

E9-19 Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature

E3147-18 Standard Practice for Evaluating DICONDE Interoperability of Nondestructive Testing and Inspection Systems

E396-17 Standard Test Methods for Chemical Analysis of Cadmium

E1742/E1742M-18 Standard Practice for Radiographic Examination

E468-18 Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials

E1025-18 Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiography

E746-18 Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems

E1067/E1067M-18 Standard Practice for Acoustic Emission Examination of Fiberglass Reinforced Plastic Resin (FRP) Tanks/Vessels

E1790-04(2016)e1 Standard Practice for Near Infrared Qualitative Analysis

E2862-18 Standard Practice for Probability of Detection Analysis for Hit/Miss Data

E566-19 Standard Practice for Electromagnetic (Eddy Current/Magnetic Induction) Sorting of Ferrous Metals

E646-16 Standard Test Method for Tensile Strain-Hardening Exponents (n -Values) of Metallic Sheet Materials

A900/A900M-01(2018) Standard Test Method for Lamination Factor of Amorphous Magnetic Strip

E2734/E2734M-10(2018) Standard Specification for Dimensions of Knife-Edge Flanges

E3097-17 Standard Test Method for Mechanical Uniaxial Constant Force Thermal Cycling of Shape Memory Alloys

E3098-17 Standard Test Method for Mechanical Uniaxial Pre-strain and Thermal Free Recovery of Shape Memory Alloys

G91-11(2018) Standard Practice for Monitoring Atmospheric SO2 Deposition Rate for Atmospheric Corrosivity Evaluation

G61-86(2018) Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys

G96-90(2018) Standard Guide for Online Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods)

E1999-18 Standard Test Method for Analysis of Cast Iron by Spark Atomic Emission Spectrometry

E1382-97(2015) Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis

G115-10(2018) Standard Guide for Measuring and Reporting Friction Coefficients

G182-13(2018) Standard Test Method for Determination of the Breakaway Friction Characteristics of Rolling Element Bearings

G164-99(2018) Standard Test Method for Determination of Surface Lubrication on Flexible Webs

G143-03(2018) Standard Test Method for Measurement of Web/Roller Friction Characteristics

G194-08(2018) Standard Test Method for Measuring Rolling Friction Characteristics of a Spherical Shape on a Flat Horizontal Plane

E2245-11(2018) Standard Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer

E2244-11(2018) Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer

E882-10(2016)e1 Standard Guide for Accountability and Quality Control in the Chemical Analysis Laboratory

E2444-11(2018) Standard Terminology Relating to Measurements Taken on Thin, Reflecting Films

E2246-11(2018) Standard Test Method for Strain Gradient Measurements of Thin, Reflecting Films Using an Optical Interferometer

E2663-14(2018) Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Ultrasonic Test Methods

G150-18 Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels and Related Alloys

E2824-18a Standard Test Method for Determination of Beryllium in Copper-Beryllium Alloys by Phosphate Gravimetry

E1475-13(2018) Standard Guide for Data Fields for Computerized Transfer of Digital Radiological Examination Data

E3022-18 Standard Practice for Measurement of Emission Characteristics and Requirements for LED UV-A Lamps Used in Fluorescent Penetrant and Magnetic Particle Testing

A697/A697M-13(2018) Standard Test Method for Alternating Current Magnetic Properties of Laminated Core Specimen Using Voltmeter-Ammeter-Wattmeter Methods

C1331-18 Standard Practice for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cross-Correlation Method

C1332-18 Standard Practice for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique

E2208-02(2018)e1 Standard Guide for Evaluating Non-Contacting Optical Strain Measurement Systems

E1834-18 Standard Test Method for Analysis of Nickel Alloys by Graphite Furnace Atomic Absorption Spectrometry

E2298-18 Standard Test Method for Instrumented Impact Testing of Metallic Materials

E2443-05(2018)e1 Standard Guide for Verifying Computer-Generated Test Results Through The Use Of Standard Data Sets

E351-18 Standard Test Methods for Chemical Analysis of Cast Iron—All Types

E1901-18 Standard Guide for Detection and Evaluation of Discontinuities by Contact Pulse-Echo Straight-Beam Ultrasonic Methods

E92-17 Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials

G219-18 Standard Guide for Determination of Static Coefficient of Friction of Test Couples Using an Inclined Plane Testing Device

E2248-18 Standard Test Method for Impact Testing of Miniaturized Charpy V-notch Specimens

E2594-20 Standard Test Method for Analysis of Nickel Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based)

E140-12B(2019)e1 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness

A976-18 Standard Classification of Insulating Coatings for Electrical Steels by Composition, Relative Insulating Ability and Application

A726-18 Standard Specification for Cold-Rolled Magnetic Lamination Quality Steel, Semiprocessed Types

G157-98(2018) Standard Guide for Evaluating Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for Chemical Process Industries

G146-01(2018) Standard Practice for Evaluation of Disbonding of Bimetallic Stainless Alloy/Steel Plate for Use in High-Pressure, High-Temperature Refinery Hydrogen Service

G161-00(2018) Standard Guide for Corrosion-Related Failure Analysis

E634-18 Standard Practice for Sampling of Zinc and Zinc Alloys for Analysis by Spark Atomic Emission Spectrometry

G210-13(2018) Standard Practice for Operating the Severe Wastewater Analysis Testing Apparatus

A838-18 Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications

A1009-18 Standard Specification for Soft Magnetic MnZn Ferrite Core Materials for Transformer and Inductor Applications

G36-94(2018) Standard Practice for Evaluating Stress-Corrosion-Cracking Resistance of Metals and Alloys in a Boiling Magnesium Chloride Solution

G76-18 Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets

G162-18 Standard Practice for Conducting and Evaluating Laboratory Corrosion Tests in Soils

G60-01(2018) Standard Practice for Conducting Cyclic Humidity Exposures

G41-90(2018) Standard Practice for Determining Cracking Susceptibility of Metals Exposed Under Stress to a Hot Salt Environment

G87-02(2018) Standard Practice for Conducting Moist SO2 Tests

E23-18 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials

E3169-18 Standard Guide for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)

E3167/E3167M-18 Standard Practice for Conventional Pulse-Echo Ultrasonic Testing of Polyethylene Electrofusion Joints

E1938-13(2018) Standard Test Method for Determination of Titanium in Nickel Alloys by Diantipyrylmethane Spectrophotometry

E1917-13(2018) Standard Test Method for Determination of Phosphorus in Nickel, Ferronickel, and Nickel Alloys by Phosphovanadomolybdate Spectrophotometry

E309-16 Standard Practice for Eddy Current Examination of Steel Tubular Products Using Magnetic Saturation

E1254-13(2018) Standard Guide for Storage of Radiographs and Unexposed Industrial Radiographic Films

E1934-99a(2018) Standard Guide for Examining Electrical and Mechanical Equipment with Infrared Thermography

E3170/E3170M-18 Standard Practice for Phased Array Ultrasonic Testing of Polyethylene Electrofusion Joints

E2001-18 Standard Guide for Resonant Ultrasound Spectroscopy for Defect Detection in Both Metallic and Non-metallic Parts

E2491-13(2018) Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems

G132-96(2018) Standard Test Method for Pin Abrasion Testing

G81-97a(2018) Standard Test Method for Jaw Crusher Gouging Abrasion Test

E1209-18 Standard Practice for Fluorescent Liquid Penetrant Testing Using the Water-Washable Process

E2368-10(2017) Standard Practice for Strain Controlled Thermomechanical Fatigue Testing

E139-11(2018) Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials

E1012-19 Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application

E2105-00(2016) Standard Practice for General Techniques of Thermogravimetric Analysis (TGA) Coupled With Infrared Analysis (TGA/IR)

E3101-18 Standard Practice for Microwave Examination of Polyethylene Butt Fusion Joints

E3102-18 Standard Practice for Microwave Examination of Polyethylene Electrofusion Joints Used in Piping Application

E1181-02(2015) Standard Test Methods for Characterizing Duplex Grain Sizes

E2446-16 Standard Practice for Manufacturing Characterization of Computed Radiography Systems

G67-18 Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test)

E2426-10(2019) Standard Practice for Pulse Counting System Dead Time Determination by Measuring Isotopic Ratios with SIMS

E1032-19 Standard Practice for Radiographic Examination of Weldments Using Industrial X-Ray Film

G16-13(2019) Standard Guide for Applying Statistics to Analysis of Corrosion Data

G135-95(2019) Standard Guide for Computerized Exchange of Corrosion Data for Metals

E1135-19 Standard Test Method for Comparing the Brightness of Fluorescent Penetrants

A343/A343M-14(2019) Standard Test Method for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method and 25-cm Epstein Test Frame

E3-11(2017) Standard Guide for Preparation of Metallographic Specimens

A345-19 Standard Specification for Flat-Rolled Electrical Steels for Magnetic Applications

E165/E165M-18 Standard Practice for Liquid Penetrant Testing for General Industry

A937/A937M-12(2019) Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces

A912/A912M-11(2019) Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Toroidal Specimens

E407-07(2015)e1 Standard Practice for Microetching Metals and Alloys

E10-18 Standard Test Method for Brinell Hardness of Metallic Materials

E1806-18 Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition

E1441-19 Standard Guide for Computed Tomography (CT)

E1655-17 Standard Practices for Infrared Multivariate Quantitative Analysis

E539-19 Standard Test Method for Analysis of Titanium Alloys by Wavelength Dispersive X-Ray Fluorescence Spectrometry

E1268-19 Standard Practice for Assessing the Degree of Banding or Orientation of Microstructures

E376-19 Standard Practice for Measuring Coating Thickness by Magnetic-Field or Eddy Current (Electromagnetic) Testing Methods

E3076-18 Standard Practice for Determination of the Slope in the Linear Region of a Test Record

E350-18 Standard Test Methods for Chemical Analysis of Carbon Steel, Low-Alloy Steel, Silicon Electrical Steel, Ingot Iron, and Wrought Iron

E74-18e1 Standard Practices for Calibration and Verification for Force-Measuring Instruments

E45-18a Standard Test Methods for Determining the Inclusion Content of Steel

E340-15 Standard Practice for Macroetching Metals and Alloys

E748-19 Standard Guide for Thermal Neutron Radiography of Materials

E983-19 Standard Guide for Minimizing Unwanted Electron Beam Effects in Auger Electron Spectroscopy

E996-19 Standard Practice for Reporting Data in Auger Electron Spectroscopy and X-ray Photoelectron Spectroscopy

E292-18 Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials

G71-81(2019) Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes

E2024/E2024M-11(2019) Standard Practice for Atmospheric Leaks Using a Thermal Conductivity Leak Detector

G4-01(2014) Standard Guide for Conducting Corrosion Tests in Field Applications

E2907/E2907M-13(2019) Standard Practice for Examination of Paper Machine Rolls Using Acoustic Emission from Crack Face Rubbing

E3213-19 Standard Practice for Part-to-Itself Examination Using Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts

E1770-19 Standard Practice for Optimization of Instrumentation for Graphite Furnace Atomic Absorption Spectrometry

E2985/E2985M-14(2019) Standard Practice for Determination of Metal Purity Based on Elastic Constant Measurements Derived from Resonant Ultrasound Spectroscopy

E768-99(2018) Standard Guide for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel

G3-14(2019) Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing

E1066/E1066M-19 Standard Practice for Ammonia Colorimetric Leak Testing

E433-71(2018) Standard Reference Photographs for Liquid Penetrant Inspection

E1951-14(2019) Standard Guide for Calibrating Reticles and Light Microscope Magnifications

G49-85(2019) Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens

E1570-19 Standard Practice for Fan Beam Computed Tomographic (CT) Examination

E545-19 Standard Test Method for Determining Image Quality in Direct Thermal Neutron Radiographic Examination

E2737-10(2018) Standard Practice for Digital Detector Array Performance Evaluation and Long-Term Stability

E2738-18 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Computed Radiography (CR) Test Methods

E1852-19 Standard Test Method for Determination of Low Levels of Antimony in Carbon and Low-Alloy Steel by Graphite Furnace Atomic Absorption Spectrometry

E697-96(2019) Standard Practice for Use of Electron-Capture Detectors in Gas Chromatography

E594-96(2019) Standard Practice for Testing Flame Ionization Detectors Used in Gas or Supercritical Fluid Chromatography

E260-96(2019) Standard Practice for Packed Column Gas Chromatography

A867-19 Standard Specification for Iron-Silicon Relay Steels

E682-92(2019) Standard Practice for Liquid Chromatography Terms and Relationships

E2983-14(2019) Standard Guide for Application of Acoustic Emission for Structural Health Monitoring

A1102-19 Standard Specification for Sintered Samarium Cobalt (SmCo) Permanent Magnets

A932/A932M-01(2019) Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Voltmeter Method with Sheet Specimens

E1426-14(2019)e1 Standard Test Method for Determining the X-Ray Elastic Constants for Use in the Measurement of Residual Stress Using X-Ray Diffraction Techniques

E1578-18 Standard Guide for Laboratory Informatics

G140-02(2019) Standard Test Method for Determining Atmospheric Chloride Deposition Rate by Wet Candle Method

E1928-13(2019) Standard Practice for Estimating the Approximate Residual Circumferential Stress in Straight Thin-walled Tubing

E2033-17 Standard Practice for Radiographic Examination Using Computed Radiography (Photostimulable Luminescence Method)

E2818-11(2019) Standard Practice for Determination of Quasistatic Fracture Toughness of Welds

A719/A719M-14(2019) Standard Test Method for Lamination Factor of Magnetic Materials

E164-19 Standard Practice for Contact Ultrasonic Testing of Weldments

E1942-98(2018)e1 Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing

E1162-11(2019) Standard Practice for Reporting Sputter Depth Profile Data in Secondary Ion Mass Spectrometry (SIMS)

E1217-11(2019) Standard Practice for Determination of the Specimen Area Contributing to the Detected Signal in Auger Electron Spectrometers and Some X-Ray Photoelectron Spectrometers

E1634-11(2019) Standard Guide for Performing Sputter Crater Depth Measurements

E1504-11(2019) Standard Practice for Reporting Mass Spectral Data in Secondary Ion Mass Spectrometry (SIMS)

E1438-11(2019) Standard Guide for Measuring Widths of Interfaces in Sputter Depth Profiling Using SIMS

E1635-06(2019) Standard Practice for Reporting Imaging Data in Secondary Ion Mass Spectrometry (SIMS)

B117-19 Standard Practice for Operating Salt Spray (Fog) Apparatus

E747-18 Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology

E82/E82M-14(2019) Standard Test Method for Determining the Orientation of a Metal Crystal

E766-14(2019) Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope

E1916-11(2019) Standard Guide for Identification of Mixed Lots of Metals

E1508-12a(2019) Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy

E2972-15(2019) Standard Guide for Production, Testing, and Value Assignment of In-House Reference Materials for Metals, Ores, and Other Related Materials

E2698-18e1 Standard Practice for Radiographic Examination Using Digital Detector Arrays

E2293-19 Standard Practice for Drying of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials for the Determination of Mercury

E1151-93(2019) Standard Practice for Ion Chromatography Terms and Relationships

E1449-92(2019) Standard Guide for Supercritical Fluid Chromatography Terms and Relationships

E2106-00(2019) Standard Practice for General Techniques of Liquid Chromatography-Infrared (LC/IR) and Size Exclusion Chromatography-Infrared (SEC/IR) Analyses

E1657-98(2019) Standard Practice for Testing Variable-Wavelength Photometric Detectors Used in Liquid Chromatography

G1-03(2017)e1 Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens

E111-17 Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus

E1747-95(2019) Standard Guide for Purity of Carbon Dioxide Used in Supercritical Fluid Applications

E977-05(2019) Standard Practice for Thermoelectric Sorting of Electrically Conductive Materials

E1935-97(2019) Standard Test Method for Calibrating and Measuring CT Density

E2283-08(2019) Standard Practice for Extreme Value Analysis of Nonmetallic Inclusions in Steel and Other Microstructural Features

E125-63(2018) Standard Reference Photographs for Magnetic Particle Indications on Ferrous Castings

E1962-19 Standard Practice for Ultrasonic Surface Testing Using Electromagnetic Acoustic Transducer (EMAT) Techniques

G85-19 Standard Practice for Modified Salt Spray (Fog) Testing

E2627-13(2019) Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials

E1735-19 Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems from 4 to 25 MeV

E2581-14(2019) Standard Practice for Shearography of Polymer Matrix Composites and Sandwich Core Materials in Aerospace Applications

E2373/E2373M-19 Standard Practice for Use of the Ultrasonic Time of Flight Diffraction (TOFD) Technique

E1601-19 Standard Practice for Conducting an Interlaboratory Study to Evaluate the Performance of an Analytical Method

E1629-12(2020) Standard Practice for Determining the Impedance of Absolute Eddy-Current Probes

E1251-17a Standard Test Method for Analysis of Aluminum and Aluminum Alloys by Spark Atomic Emission Spectrometry

E1065/E1065M-20 Standard Practice for Evaluating Characteristics of Ultrasonic Search Units

E569/E569M-20 Standard Practice for Acoustic Emission Monitoring of Structures During Controlled Stimulation

E1941-10(2016) Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis

E1335-08(2017) Standard Test Methods for Determination of Gold in Bullion by Fire Assay Cupellation Analysis

E345-16 Standard Test Methods of Tension Testing of Metallic Foil

E2309/E2309M-20 Standard Practices for Verification of Displacement Measuring Systems and Devices Used in Material Testing Machines

E4-21 Standard Practices for Force Calibration and Verification of Testing Machines

E2714-13(2020) Standard Test Method for Creep-Fatigue Testing

G69-20 Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys

E1221-12A(2018)e1 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels

E2472-12(2018)e1 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions

E2899-19e1 Standard Test Method for Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending

E155-20 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Castings

E1648-20 Standard Reference Radiographs for Examination of Aluminum Fusion Welds

E2003-20 Standard Practice for Fabrication of the Neutron Radiographic Beam Purity Indicators

E587-15(2020) Standard Practice for Ultrasonic Angle-Beam Contact Testing

E242-15(2020) Standard Reference Radiographs for Appearances of Radiographic Images as Certain Parameters are Changed

E690-15(2020) Standard Practice for In Situ Electromagnetic (Eddy Current) Examination of Nonmagnetic Heat Exchanger Tubes

E750-15(2020) Standard Practice for Characterizing Acoustic Emission Instrumentation

E1118/E1118M-16(2020) Standard Practice for Acoustic Emission Examination of Reinforced Thermosetting Resin Pipe (RTRP)

E1419/E1419M-15a(2020) Standard Practice for Examination of Seamless, Gas-Filled, Pressure Vessels Using Acoustic Emission

E2075/E2075M-15(2020) Standard Practice for Verifying the Consistency of AE-Sensor Response Using an Acrylic Rod

E1457-19e1 Standard Test Method for Measurement of Creep Crack Growth Times in Metals

E2760-19e1 Standard Test Method for Creep-Fatigue Crack Growth Testing

A1013-00(2020) Standard Test Method for High-Frequency (10 kHz-1 MHz) Core Loss of Soft Magnetic Core Components at Controlled Temperatures Using the Voltmeter-Ammeter-Wattmeter Method

A889/A889M-14(2020) Standard Test Method for Alternating-Current Magnetic Properties of Materials at Low Magnetic Flux Density Using the Voltmeter-Ammeter-Wattmeter-Varmeter Method and 25-cm Epstein Frame

A977/A977M-07(2020) Standard Test Method for Magnetic Properties of High-Coercivity Permanent Magnet Materials Using Hysteresigraphs

A1036-04(2020) Standard Guide for Measuring Power Frequency Magnetic Properties of Flat-Rolled Electrical Steels Using Small Single Sheet Testers

E2941-21 Standard Practices for Extraction of Elements from Ores and Related Metallurgical Materials by Acid Digestion

E1019-18 Standard Test Methods for Determination of Carbon, Sulfur, Nitrogen, and Oxygen in Steel, Iron, Nickel, and Cobalt Alloys by Various Combustion and Inert Gas Fusion Techniques

E2575-19 Standard Test Method for Determination of Oxygen in Copper and Copper Alloys by Inert Gas Fusion

E664/E664M-15(2020)e1 Standard Practice for the Measurement of the Apparent Attenuation of Longitudinal Ultrasonic Waves by Immersion Method

E3166-20e1 Standard Guide for Nondestructive Examination of Metal Additively Manufactured Aerospace Parts After Build

E562-19e1 Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count

E570-20 Standard Practice for Flux Leakage Examination of Ferromagnetic Steel Tubular Products

G51-18 Standard Test Method for Measuring pH of Soil for Use in Corrosion Testing

E1681-03(2020) Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials

G34-01(2018)e1 Standard Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test)

G101-04(2020) Standard Guide for Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels

G33-99(2020) Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens

G202-12(2020) Standard Test Method for Using Atmospheric Pressure Rotating Cage

G203-10(2020) Standard Guide for Determining Friction Energy Dissipation in Reciprocating Tribosystems

E2661/E2661M-20e1 Standard Practice for Acoustic Emission Examination of Plate-like and Flat Panel Composite Structures Used in Aerospace Applications

G208-12(2020) Standard Practice for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors Using Jet Impingement Apparatus

E1351-01(2020) Standard Practice for Production and Evaluation of Field Metallographic Replicas

G211-14(2020) Standard Test Method for Conducting Elevated Temperature Erosion Tests by Solid Particle Impingement Using Gas Jets

E2014-17 Standard Guide on Metallographic Laboratory Safety

G84-89(2020) Standard Practice for Measurement of Time-of-Wetness on Surfaces Exposed to Wetting Conditions as in Atmospheric Corrosion Testing

G59-97(2020) Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements

A698/A698M-20 Standard Test Method for Magnetic Shield Efficiency in Attenuating Alternating Magnetic Fields

A904-20 Standard Specification for 50 Nickel-50 Iron Powder Metallurgy Soft Magnetic Parts

E1936-20 Standard Reference Radiograph for Evaluating the Performance of Radiographic Digitization Systems

E1880-12(2020) Standard Practice for Tissue Cryosection Analysis with SIMS

E1078-14(2020) Standard Guide for Specimen Preparation and Mounting in Surface Analysis

E2735-14(2020) Standard Guide for Selection of Calibrations Needed for X-ray Photoelectron Spectroscopy (XPS) Experiments

E2382-04(2020) Standard Guide to Scanner and Tip Related Artifacts in Scanning Tunneling Microscopy and Atomic Force Microscopy

E1881-12(2020) Standard Guide for Cell Culture Analysis with SIMS

E1829-14(2020) Standard Guide for Handling Specimens Prior to Surface Analysis

E571-19 Standard Practice for Electromagnetic (Eddy-Current) Examination of Nickel and Nickel Alloy Tubular Products

A901-19 Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types

E984-12(2020) Standard Guide for Identifying Chemical Effects and Matrix Effects in Auger Electron Spectroscopy

E592-20 Standard Guide to Obtainable ASTM Equivalent Penetrameter Sensitivity for Film Radiography of Steel Plates 14 to 2 in. (6 to 51 mm) Thick with X-Rays and 1 to 6 in. (25 to 152 mm) Thick with Cobalt-60

E1606-20 Standard Practice for Electromagnetic (Eddy Current) Examination of Copper and Aluminum Redraw Rod for Electrical Purposes

G187-18 Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method

G170-06(2020)e1 Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory

E1320-20 Standard Reference Radiographs for Titanium Castings

E1016-07(2020) Standard Guide for Literature Describing Properties of Electrostatic Electron Spectrometers

G192-08(2020)e1 Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique

G199-09(2020)e1 Standard Guide for Electrochemical Noise Measurement

E689-20 Standard Reference Radiographs for Ductile Iron Castings

G107-95(2020)e1 Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input

E2971-16(2020) Standard Test Method for Determination of Effective Boron-10 Areal Density in Aluminum Neutron Absorbers using Neutron Attenuation Measurements

E1672-12(2020) Standard Guide for Computed Tomography (CT) System Selection

E2861-16(2020) Standard Test Method for Measurement of Beam Divergence and Alignment in Neutron Radiologic Beams

G116-99(2020)e1 Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion

G48-11(2020)e1 Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution

G185-06(2020)e1 Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode

G184-06(2020)e1 Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using Rotating Cage

E1781/E1781M-20 Standard Practice for Secondary Calibration of Acoustic Emission Sensors

E186-20 Standard Reference Radiographs for Heavy-Walled (2 to 412 in. (50.8 to 114 mm)) Steel Castings

E1561-20 Standard Practice for Analysis of Strain Gage Rosette Data

G52-20 Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater

G78-20 Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments

G92-20 Standard Practice for Characterization of Atmospheric Test Sites

G82-98(2021)e1 Standard Guide for Development and Use of a Galvanic Series for Predicting Galvanic Corrosion Performance

G189-07(2021)e1 Standard Guide for Laboratory Simulation of Corrosion Under Insulation

E2700-20 Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays

E703-20 Standard Practice for Electromagnetic (Eddy Current) Sorting of Nonferrous Metals

E2445/E2445M-20 Standard Practice for Performance Evaluation and Long-Term Stability of Computed Radiography Systems

A1086-20 Standard Specification for Thin-Gauge Nonoriented Electrical Steel Fully Processed Types

A34/A34M-06(2021) Standard Practice for Sampling and Procurement Testing of Magnetic Materials

A804/A804M-04(2021) Standard Test Methods for Alternating-Current Magnetic Properties of Materials at Power Frequencies Using Sheet-Type Test Specimens

E1361-02(2021) Standard Guide for Correction of Interelement Effects in X-Ray Spectrometric Analysis

E516-95a(2021) Standard Practice for Testing Thermal Conductivity Detectors Used in Gas Chromatography

E334-01(2021) Standard Practice for General Techniques of Infrared Microanalysis

B594-19e1 Standard Practice for Ultrasonic Inspection of Aluminum-Alloy Wrought Products

E1252-98(2021) Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis

E958-13(2021) Standard Practice for Estimation of the Spectral Bandwidth of Ultraviolet-Visible Spectrophotometers

E578-07(2021) Standard Test Method for Linearity of Fluorescence Measuring Systems

E573-01(2021) Standard Practices for Internal Reflection Spectroscopy

E685-93(2021) Standard Practice for Testing Fixed-Wavelength Photometric Detectors Used in Liquid Chromatography

E932-89(2021) Standard Practice for Describing and Measuring Performance of Dispersive Infrared Spectrometers

E1944-98(2021) Standard Practice for Describing and Measuring Performance of Laboratory Fourier Transform Near-Infrared (FT-NIR) Spectrometers: Level Zero and Level One Tests

E1982-98(2021) Standard Practice for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air

E1865-97(2021) Standard Guide for Open-Path Fourier Transform Infrared (OP/FT-IR) Monitoring of Gases and Vapors in Air

E1866-97(2021) Standard Guide for Establishing Spectrophotometer Performance Tests

E1510-95(2021) Standard Practice for Installing Fused Silica Open Tubular Capillary Columns in Gas Chromatographs

E355-96(2021)e1 Standard Practice for Gas Chromatography Terms and Relationships

E2015-04(2021) Standard Guide for Preparation of Plastics and Polymeric Specimens for Microstructural Examination

G206-17(2021)e1 Standard Guide for Measuring the Wear Volumes of Piston Ring Segments Run against Flat Coupons in Reciprocating Wear Tests

G181-21 Standard Test Method for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions

E1571-21 Standard Practice for Electromagnetic Examination of Ferromagnetic Steel Wire Rope

E2109-01(2021) Standard Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings

E1920-03(2021) Standard Guide for Metallographic Preparation of Thermal Sprayed Coatings

E1558-09(2021) Standard Guide for Electrolytic Polishing of Metallographic Specimens

E1390-21 Standard Specification for Illuminators Used for Viewing Industrial Radiographs

E1079-21 Standard Practice for Calibration of Transmission Densitometers

E1001-21 Standard Practice for Detection and Evaluation of Discontinuities by the Immersed Pulse-Echo Ultrasonic Method Using Longitudinal Waves

E976-15(2021) Standard Guide for Determining the Reproducibility of Acoustic Emission Sensor Response

E1961-16(2021) Standard Practice for Mechanized Ultrasonic Testing of Girth Welds Using Zonal Discrimination with Focused Search Units

E112-13(2021) Standard Test Methods for Determining Average Grain Size

E2261/E2261M-17(2021) Standard Practice for Examination of Welds Using the Alternating Current Field Measurement Technique

E2374-16(2021) Standard Guide for Acoustic Emission System Performance Verification

E749/E749M-17(2021) Standard Practice for Acoustic Emission Monitoring During Continuous Welding

E2984/E2984M-21 Standard Practice for Acoustic Emission Examination of High Pressure, Low Carbon, Forged Piping using Controlled Hydrostatic Pressurization

E3052-21 Standard Practice for Examination of Carbon Steel Welds Using An Eddy Current Array

E1417/E1417M-21e1 Standard Practice for Liquid Penetrant Testing

G65-16(2021) Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus

G75-15(2021) Standard Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number)

G73-10(2021) Standard Test Method for Liquid Impingement Erosion Using Rotating Apparatus

E801-21 Standard Practice for Controlling Quality of Radiographic Examination of Electronic Devices

E802-21 Standard Reference Radiographs for Gray Iron Castings Up to 412 in. (114 mm) in Thickness

E1856-13(2021) Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines

E2296-21 Standard Practice for Silver Corrections in Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Fire Assay Slag Recycling and Cupel Proof Gravimetry

E2598/E2598M-21 Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper Dryers

E276-21 Standard Test Method for Particle Size or Screen Analysis at 4.75 mm (No. 4) Sieve and Finer for Metal-Bearing Ores and Related Materials

E2295-21 Standard Practice for Fire Assay Silver Corrections in Analysis of Metal Bearing Ores, Concentrates, and Related Metallurgical Materials by Silver Determination in Slags and Cupels

E272-21 Standard Reference Radiographs for High-Strength Copper-Base and Nickel-Copper Alloy Castings

E1568-21 Standard Test Method for Determination of Gold in Activated Carbon by Fire Assay Gravimetry

E2792-21 Standard Test Method for Determination of Hydrogen in Aluminum and Aluminum Alloys by Inert Gas Fusion

G111-21a Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both

G109-21 Standard Test Methods for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments

E275-08(2022) Standard Practice for Describing and Measuring Performance of Ultraviolet and Visible Spectrophotometers

E2994-21 Standard Test Method for Analysis of Titanium and Titanium Alloys by Spark Atomic Emission Spectrometry and Glow Discharge Atomic Emission Spectrometry (Performance-Based Method)

E2371-21a Standard Test Method for Analysis of Titanium and Titanium Alloys by Direct Current Plasma and Inductively Coupled Plasma Atomic Emission Spectrometry (Performance-Based Test Methodology)

E1282-21 Standard Guide for Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis Methods for Metals, Ores, and Related Materials

E2789-10(2021) Standard Guide for Fretting Fatigue Testing

E915-21 Standard Practice for Verifying the Alignment of X-Ray Diffraction Instruments for Residual Stress Measurement

B611-21 Standard Test Method for Determining the High Stress Abrasion Resistance of Hard Materials

E1409-13(2021) Standard Test Method for Determination of Oxygen and Nitrogen in Titanium and Titanium Alloys by Inert Gas Fusion

E633-21a Standard Guide for Use of Thermocouples in Elevated-Temperature Mechanical Testing

E2597/E2597M-22 Standard Practice for Manufacturing Characterization of Digital Detector Arrays

E3185-21 Standard Digital Reference Images for Tin Bronze Castings

E352-18e1 Standard Test Methods for Chemical Analysis of Tool Steels and Other Similar Medium- and High-Alloy Steels

E353-19e1 Standard Test Methods for Chemical Analysis of Stainless, Heat-Resisting, Maraging, and Other Similar Chromium-Nickel-Iron Alloys

E354-21e1 Standard Test Methods for Chemical Analysis of High-Temperature, Electrical, Magnetic, and Other Similar Iron, Nickel, and Cobalt Alloys

E213-22 Standard Practice for Ultrasonic Testing of Metal Pipe and Tubing

E3044/E3044M-22 Standard Practice for Ultrasonic Testing of Polyethylene Butt Fusion Joints

E2948-22 Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire

E3327/E3327M-21 Standard Guide for the Qualification and Control of the Assisted Defect Recognition of Digital Radiographic Test Data

E2002-22 Standard Practice for Determining Image Unsharpness and Basic Spatial Resolution in Radiography and Radioscopy

E3024/E3024M-22a Standard Practice for Magnetic Particle Testing for General Industry

E3330-22 Standard Guide for Contents of Documentation and Statistical Treatments for Reference Materials for Metals, Ores, and Related Materials

E2857-22 Standard Guide for Validating Analytical Methods

G30-22 Standard Practice for Making and Using U-Bend Stress-Corrosion Test Specimens

G217-16(2022) Standard Guide for Corrosion Monitoring in Laboratories and Plants with Coupled Multielectrode Array Sensor Method

E2934-22 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Eddy Current (EC) Test Methods

E2339-21 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)

E18-22 Standard Test Methods for Rockwell Hardness of Metallic Materials

E3246-22 Standard Test Methods for Differential Indentation Depth Hardness of Metallic Materials

E2104-22 Standard Practice for Radiographic Examination of Advanced Aero and Turbine Materials and Components

G195-22 Standard Guide for Conducting Wear Tests Using a Rotary Platform Abraser

E1316-22a Standard Terminology for Nondestructive Examinations

E2096/E2096M-22 Standard Practice for In Situ Examination of Ferromagnetic Heat-Exchanger Tubes Using Remote Field Testing

E2884-22 Standard Guide for Eddy Current Testing of Electrically Conducting Materials Using Conformable Sensor Arrays

E2338-22 Standard Practice for Characterization of Coatings Using Conformable Eddy Current Sensors without Coating Reference Standards

E381-22 Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings

E1447-22 Standard Test Method for Determination of Hydrogen in Reactive Metals and Reactive Metal Alloys by Inert Gas Fusion with Detection by Thermal Conductivity or Infrared Spectrometry

E1695-20e1 Standard Test Method for Measurement of Computed Tomography (CT) System Performance

E561-22 Standard Test Method for KR Curve Determination

E60-11(2022)e1 Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry

E367-22 Standard Test Methods for Chemical Analysis of Ferroniobium

E1621-22 Standard Guide for Elemental Analysis by Wavelength Dispersive X-Ray Fluorescence Spectrometry

E432-91(2022) Standard Guide for Selection of a Leak Testing Method

E493/E493M-11(2022) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector in the Inside-Out Testing Mode

E498/E498M-11(2022) Standard Practice for Leaks Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Tracer Probe Mode

E908-98(2022) Standard Practice for Calibrating Gaseous Reference Leaks

E515-11(2022) Standard Practice for Leaks Using Bubble Emission Techniques

E1002-11(2022) Standard Practice for Leaks Using Ultrasonics

E1003-13(2022) Standard Practice for Hydrostatic Leak Testing

E1774-17(2022) Standard Guide for Electromagnetic Acoustic Transducers (EMATs)

E1931-16(2022) Standard Guide for Non-computed X-Ray Compton Scatter Tomography

E1603/E1603M-11(2022) Standard Practice for Leakage Measurement Using the Mass Spectrometer Leak Detector or Residual Gas Analyzer in the Hood Mode

E1814-14(2022) Standard Practice for Computed Tomographic (CT) Examination of Castings

E399-22 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials

E1306-22 Standard Practice for Preparation of Metal and Alloy Samples by Electric Arc Melting for Spectrochemical Analysis

E1444/E1444M-22a Standard Practice for Magnetic Particle Testing for Aerospace

E1876-22 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration

A664-15(2022) Standard Practice for Identification of Standard Electrical Steel Grades in ASTM Specifications

A1070-16(2022) Standard Specification for Cast and Sintered Alnico Permanent Magnets

E3045-22 Standard Practice for Crack Detection Using Vibroacoustic Thermography

A340-22 Standard Terminology of Symbols and Definitions Relating to Magnetic Testing

E8/E8M-22 Standard Test Methods for Tension Testing of Metallic Materials

E215-22 Standard Practice for Standardizing Equipment and Electromagnetic Examination of Seamless Aluminum-Alloy Tube

E1835-14(2022) Standard Test Method for Analysis of Nickel Alloys by Flame Atomic Absorption Spectrometry

E1086-22 Standard Test Method for Analysis of Austenitic Stainless Steel by Spark Atomic Emission Spectrometry

E2209-22 Standard Test Method for Analysis of High Manganese Steel by Spark Atomic Emission Spectrometry

E716-16(2021)e2 Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spark Atomic Emission Spectrometry

E290-22 Standard Test Methods for Bend Testing of Material for Ductility

E581-17A(2022)e1 Standard Test Methods for Chemical Analysis of Manganese-Copper Alloys

E3353-22 Standard Guide for In-Process Monitoring Using Optical and Thermal Methods for Laser Powder Bed Fusion

G97-18(2022) Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications

G139-05(2022) Standard Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using Breaking Load Method

G209-14(2022) Standard Practice for Detecting mu-phase in Wrought Nickel-Rich, Chromium, Molybdenum-Bearing Alloys

C876-22b Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete

E431-96(2022) Standard Guide to Interpretation of Radiographs of Semiconductors and Related Devices

G123-00(2022)e1 Standard Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution

G193-22 Standard Terminology and Acronyms Relating to Corrosion

G142-98(2022) Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both

A598/A598M-02(2022) Standard Test Method for Magnetic Properties of Magnetic Amplifier Cores

A341/A341M-16(2022) Standard Test Method for Direct Current Magnetic Properties of Soft Magnetic Materials Using D-C Permeameters and the Point by Point (Ballistic) Test Methods

A712-14(2022) Standard Test Method for Electrical Resistivity of Soft Magnetic Alloys

A717/A717M-12(2022) Standard Test Method for Surface Insulation Resistivity of Single-Strip Specimens

A772/A772M-00(2022) Standard Test Method for AC Magnetic Permeability of Materials Using Sinusoidal Current

A811-15(2022) Standard Specification for Soft Magnetic Iron Parts Fabricated by Powder Metallurgy Techniques

A893/A893M-03(2022) Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies

A927/A927M-18(2022) Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wattmeter Method

A971/A971M-17(2022) Standard Test Method for Measuring Edge Taper and Crown of Flat-Rolled Electrical Steel Coils

A1054-16(2022) Standard Specification for Sintered Ferrite Permanent Magnets

E169-16(2022) Standard Practices for General Techniques of Ultraviolet-Visible Quantitative Analysis

E387-04(2022) Standard Test Method for Estimating Stray Radiant Power Ratio of Dispersive Spectrophotometers by the Opaque Filter Method

E925-09(2022) Standard Practice for Monitoring the Calibration of Ultraviolet-Visible Spectrophotometers whose Spectral Bandwidth does not Exceed 2 nm

E1947-98(2022) Standard Specification for Analytical Data Interchange Protocol for Chromatographic Data

E1948-98(2022) Standard Guide for Analytical Data Interchange Protocol for Chromatographic Data

E2719-09(2022) Standard Guide for Fluorescence—Instrument Calibration and Qualification

G77-17(2022) Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test

G98-17(2022) Standard Test Method for Galling Resistance of Materials

E384-22 Standard Test Method for Microindentation Hardness of Materials

E7-22 Standard Terminology Relating to Metallography

E363-22 Standard Test Methods for Chemical Analysis of Chromium and Ferrochromium

G40-22a Standard Terminology Relating to Wear and Erosion

G133-22 Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear

E1277-22 Standard Test Method for Analysis of Zinc-5 % Aluminum-Mischmetal Alloys by Inductively Coupled Plasma Atomic Emission Spectrometry

E2712-22 Standard Test Methods for Bulge-Forming Superplastic Metallic Sheet

E1921-22a Standard Test Method for Determination of Reference Temperature, T0, for Ferritic Steels in the Transition Range

E3047-22 Standard Test Method for Analysis of Nickel Alloys by Spark Atomic Emission Spectrometry

E1085-22 Standard Test Method for Analysis of Low-Alloy Steels by Wavelength Dispersive X-Ray Fluorescence Spectrometry

E1476-04(2022) Standard Guide for Metals Identification, Grade Verification, and Sorting

E1543-14(2022) Standard Practice for Noise Equivalent Temperature Difference of Thermal Imaging Systems

E1736-15(2022) Standard Practice for Acousto-Ultrasonic Assessment of Filament-Wound Pressure Vessels

E1816-18(2022) Standard Practice for Measuring thickness by Pulse-Echo Electromagnetic Acoustic Transducer (EMAT) Methods

E751/E751M-17(2022) Standard Practice for Acoustic Emission Monitoring During Resistance Spot-Welding

E1213-14(2022) Standard Practice for Minimum Resolvable Temperature Difference for Thermal Imaging Systems

E1311-14(2022) Standard Practice for Minimum Detectable Temperature Difference for Thermal Imaging Systems

G174-22 Standard Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact

E55-11(2022)e1 Standard Practice for Sampling Wrought Nonferrous Metals and Alloys for Determination of Chemical Composition

E1647-16(2022) Standard Practice for Determining Contrast Sensitivity in Radiology

E1817-08(2022) Standard Practice for Controlling Quality of Radiological Examination by Using Representative Quality Indicators (RQIs)

E1862-14(2022) Standard Practice for Measuring and Compensating for Reflected Temperature Using Infrared Imaging Radiometers

E1897-14(2022) Standard Practice for Measuring and Compensating for Transmittance of an Attenuating Medium Using Infrared Imaging Radiometers

E1932-12(2022) Standard Guide for Acoustic Emission Examination of Small Parts

E2662-15(2022) Standard Practice for Radiographic Examination of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications

E2736-17(2022) Standard Guide for Digital Detector Array Radiography

E2906/E2906M-18(2022) Standard Practice for Acoustic Pulse Reflectometry Examination of Tube Bundles

E2929-18(2022) Standard Practice for Guided Wave Testing of Above Ground Steel Piping with Magnetostrictive Transduction

E1933-14(2022) Standard Practice for Measuring and Compensating for Emissivity Using Infrared Imaging Radiometers

E2076/E2076M-15(2022) Standard Practice for Examination of Fiberglass Reinforced Plastic Fan Blades Using Acoustic Emission

E2192-13(2022) Standard Guide for Planar Flaw Height Sizing by Ultrasonics

E2223-13(2022) Standard Practice for Examination of Seamless, Gas-Filled, Steel Pressure Vessels Using Angle Beam Ultrasonics

E2478-11(2022) Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission

E1840-96(2022) Standard Guide for Raman Shift Standards for Spectrometer Calibration

E1683-02(2022) Standard Practice for Testing the Performance of Scanning Raman Spectrometers

E2529-06(2022) Standard Guide for Testing the Resolution of a Raman Spectrometer

E2023-22 Standard Practice for Fabrication of Neutron Radiographic Sensitivity Indicators

E3100-22 Standard Guide for Acoustic Emission Examination of Concrete Structures

E505-22 Standard Reference Radiographs for Inspection of Aluminum and Magnesium Die Castings

E2973-22 Standard Digital Reference Images for Inspection of Aluminum and Magnesium Die Castings

E94/E94M-22 Standard Guide for Radiographic Examination Using Industrial Radiographic Film

E1473-22 Standard Test Methods for Chemical Analysis of Nickel, Cobalt, and High-Temperature Alloys

E2422-22 Standard Digital Reference Images for Inspection of Aluminum Castings

E2660-22 Standard Digital Reference Images for Investment Steel Castings for Aerospace Applications

E2669-22 Standard Digital Reference Images for Titanium Castings

E2868-22 Standard Digital Reference Images for Steel Castings up to 2 in. (50.8 mm) in Thickness

E1172-22 Standard Practice for Describing and Specifying a Wavelength Dispersive X-Ray Spectrometer

E131-10(2023) Standard Terminology Relating to Molecular Spectroscopy

E168-16(2023) Standard Practices for General Techniques of Infrared Quantitative Analysis

E388-04(2023) Standard Test Method for Wavelength Accuracy and Spectral Bandwidth of Fluorescence Spectrometers

E3029-15(2023) Standard Practice for Determining Relative Spectral Correction Factors for Emission Signal of Fluorescence Spectrometers

E3346-22 Standard Guide for Combustion, Inert Gas Fusion and Hot Extraction Instruments for use in Analyzing Metals, Ores, and Related Materials

E2904-22 Standard Practice for Characterization and Verification of Linear Phased Array Ultrasonic Probes

G28-22 Standard Test Methods for Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys

G47-22 Standard Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products

G112-22 Standard Guide for Conducting Exfoliation Corrosion Tests in Aluminum Alloys

E2375-22 Standard Practice for Ultrasonic Testing of Wrought Products

E3370-22 Standard Practice for Matrix Array Ultrasonic Testing of Composites, Sandwich Core Constructions, and Metals Used in Aerospace Applications

E110-14(2023) Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers

E135-22b Standard Terminology Relating to Analytical Chemistry for Metals, Ores, and Related Materials

E579-04(2023) Standard Test Method for Limit of Detection of Fluorescence of Quinine Sulfate in Solution

E2428-22 Standard Practice for Calibration and Verification of Elastic Torque Measurement Standards

E2448-22 Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials

G110-92(2022)e2 Standard Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solution

E3030-19e1 Standard Digital Reference Images for Heavy-Walled (2 to 412 in. (50.8 to 114 mm)) Steel Castings

E208-20e1 Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels

E2977-15(2023) Standard Practice for Measuring and Reporting Performance of Fourier-Transform Nuclear Magnetic Resonance (FT-NMR) Spectrometers for Liquid Samples

G103-97(2023)e1 Standard Practice for Evaluating Stress-Corrosion Cracking Resistance of Low Copper 7XXX Series Al-Zn-Mg-Cu Alloys in Boiling 6 % Sodium Chloride Solution

E3375-23 Standard Practice for Cone Beam Computed Tomographic (CT) Examination

E975-22 Standard Test Method for X-Ray Determination of Retained Austenite in Steel with Near Random Crystallographic Orientation

E1416-23 Standard Practice for Radioscopic Examination of Weldments

E83-23 Standard Practice for Verification and Classification of Extensometer Systems

G66-99(2018)e1 Standard Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test)

G102-23 Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements

E739-23 Standard Guide for Statistical Analysis of Linear or Linearized Stress-Life (S-N) and Strain-Life (ε-N) Fatigue Data

E1820-23 Standard Test Method for Measurement of Fracture Toughness

E2297-23 Standard Guide for Use of UV-A and Visible Light Sources and Meters used in the Liquid Penetrant and Magnetic Particle Methods

E2928/E2928M-23 Standard Practice for Examination of Drillstring Threads Using the Alternating Current Field Measurement Technique

E647-22b Standard Test Method for Measurement of Fatigue Crack Growth Rates