ASTM Volume 15.10, June 2022

Table of Contents

F17-20 Standard Terminology Relating to Primary Barrier Packaging

F2476-20 Standard Test Method for the Determination of Carbon Dioxide Gas Transmission Rate (CO2TR) Through Barrier Materials Using an Infrared Detector

D6179-20 Standard Test Methods for Rough Handling of Unitized Loads and Large Shipping Cases and Crates

F2097-20 Standard Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products

F1927-20 Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector

D642-20 Standard Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads

F1307-20 Standard Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor

D8314-20 Standard Guide for Performance Testing of Applied Stretch Films and Stretch Wrapping

D8196-20 Standard Practice for Determination of Water Activity (aw) in Cannabis Flower

D5639/D5639M-20 Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements

D3475-20 Standard Classification of Child-Resistant Packages

D6633-18 Standard Practice for Basic Functional Stability of a Mechanical Pump Dispenser

D4335-18 Standard Practice for Determination of Component Retention of a Mechanical Pump Dispenser

D3951-18 Standard Practice for Commercial Packaging

D4649-20 Standard Guide for Use of Stretch Films and Wrapping Application

D4336-18 Standard Practice for Determination of the Output Per Stroke of a Mechanical Pump Dispenser

F1249-20 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor

D4333/D4333M-18 Standard Practice for Compatibility of Mechanical Pump Dispenser Components

F3299-18 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using an Electrolytic Detection Sensor (Coulometric P2O5 Sensor)

D6880/D6880M-19 Standard Specification for Wood Boxes

D6251/D6251M-19 Standard Specification for Wood-Cleated Panelboard Shipping Boxes

D6804-19 Standard Guide for Hand Hole Design in Corrugated Boxes

F99-21 Standard Guide for Writing a Specification for Flexible Barrier Rollstock Materials

D8372-21 Standard Guide for Cannabis/Hemp Extract Vaporizers

F3136-15 Standard Test Method for Oxygen Gas Transmission Rate through Plastic Film and Sheeting using a Dynamic Accumulation Method

D3580-95(2015) Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products

D8373-21 Standard Guide for Cannabis/Hemp Flower Vaporizers

D5277-92(2015) Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester

D5112-98(2015) Standard Test Method for Vibration (Horizontal Linear Motion) Test of Products

D8244-21a Standard Guide for Analytical Laboratory Operations Supporting the Cannabis/Hemp Industry

D3953-15 Standard Specification for Strapping, Flat Steel and Seals

D4991-07(2015) Standard Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method

D8376-21 Standard Classification for Cannabis/Hemp Extract Vaporizers

D8357-21 Standard Classification for Cannabis/Hemp Flower Vaporizers

D8374-21 Standard Guide for Personal Cannabis/Hemp Plant Growing Appliances

D8390-21 Standard Classification for Domestic Cannabis/Hemp Plant Indoor Growing Appliances

D8309-21 Standard Guide for Stability Testing of Cannabis-Based Products

D999-08(2015) Standard Test Methods for Vibration Testing of Shipping Containers

F119-82(2015) Standard Test Method for Rate of Grease Penetration of Flexible Barrier Materials (Rapid Method)

F3039-15 Standard Test Method for Detecting Leaks in Nonporous Packaging or Flexible Barrier Materials by Dye Penetration

F1929-15 Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration

D8197-21 Standard Specification for Maintaining Acceptable Water Activity (aw) Range (0.55 to 0.65) for Dry Cannabis Flower Intended for Human/Animal Use

D6701-21 Standard Test Method for Determining Water Vapor Transmission Rates Through Nonwoven and Plastic Barriers

D3332-99(2016) Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines

F2391-05(2016) Standard Test Method for Measuring Package and Seal Integrity Using Helium as the Tracer Gas

F1306-21 Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates

D4267-07(2015) Standard Specification for Labels for Small-Volume (100 mL or Less) Parenteral Drug Containers

D8308-21 Standard Practice for Cannabis/Hemp Operation Compliance Audits

D4775/D4775M-09(2014) Standard Specification for Identification and Configuration of Prefilled Syringes and Delivery Systems for Drugs (Excluding Pharmacy Bulk Packages)

D5571-16 Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Plastic Tighthead Drums Not Exceeding 60 Gal (227 L) in Rated Capacity

D1975-16 Standard Test Method for Environmental Stress Crack Resistance of Plastic Injection Molded Open Head Pails

F2013-10(2016) Standard Test Method for Determination of Residual Acetaldehyde in Polyethylene Terephthalate Bottle Polymer Using an Automated Static Head-Space Sampling Device and a Capillary GC with a Flame Ionization Detector

D7386-16 Standard Practice for Performance Testing of Packages for Single Parcel Delivery Systems

D6253-16 Standard Practice for Treatment and/or Marking of Wood Packaging Materials

D5265-09(2016) Standard Test Method for Bridge Impact Testing

D7860-14 Standard Test Methods for Measurement of Torque Retention for Child Resistant and Non-Child Resistant Packages with Continuous Thread Closures Using Automated Torque Testing Equipment

D5094/D5094M-09(2014) Standard Test Methods for Gross Leakage of Liquids from Containers with Threaded or Lug-Style Closures

F1886/F1886M-16 Standard Test Method for Determining Integrity of Seals for Flexible Packaging by Visual Inspection

F1115-16 Standard Test Method for Determining the Carbon Dioxide Loss of Beverage Containers

D996-16 Standard Terminology of Packaging and Distribution Environments

D5331-03(2016) Standard Test Method for Evaluation of Mechanical Handling of Unitized Loads Secured with Stretch Wrap Films

F3169-16 Standard Test Method for Leak Detection in Blister Packaging by Vacuum Deflection Method by Laser Measurement

D3091-72(2016) Standard Practice for Safe Filling of Low-Pressure Pressurized Products

D3090-72(2016) Standard Practice for Storage Testing of Aerosol Products

D6256/D6256M-16 Standard Specification for Wood-Cleated Shipping Boxes with Skidded, Load-Bearing Bases

D3089-97(2017) Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes

D5749-17 Standard Specification for Reinforced and Plain Gummed Tape for Sealing and Securing

D1185-98a(2017) Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping

D4279-95(2017) Standard Test Methods for Water Vapor Transmission of Shipping Containers—Constant and Cycle Methods

D6344-04(2017) Standard Test Method for Concentrated Impacts to Transport Packages

D7709-12(2017) Standard Test Methods for Measuring Water Vapor Transmission Rate (WVTR) of Pharmaceutical Bottles and Blisters

D8222-21a Standard Guide for Establishing a Quality Management System (QMS) for Consumer Use of Cannabis/Hemp Products

D8320-21 Standard Practice for Implementing an Information Security Program in a Cannabis Operation

D6787/D6787M-02(2017) Standard Specification for Repositionable Note Pad

D6788-02(2017) Standard Specification for Repositionable Pressure-Sensitive Flags

D3950-17 Standard Specification for Strapping, Nonmetallic (and Joining Methods)

D7478/D7478M-11(2017) Standard Specification for Heavy Duty Sheathed Wood Crates

D7932-17 Standard Specification for Printed, Pressure-Sensitive Adhesive Labels for Use in Extreme Distribution Environments

D951-17 Standard Test Method for Water Resistance of Shipping Containers by Spray Method

D8135-17 Standard Guide for Selection of Substitute, Non-hazardous, Particulate Solid Filling Substances for Packagings Subjected to the United Nations Performance Tests

D4041/D4041M-05(2017) Standard Practice for Determining Spray Patterns of Mechanical Pump Dispensers

D8343/D8343M-21 Standard Practice for Measuring the Physical Properties of Cannabis/Hemp Pre-rolls

D4504-94(2018) Standard Specification for Molded Polyethylene Open-Head-Pails for Industrial Shipping of Nonhazardous Goods

D6255/D6255M-18 Standard Specification for Steel or Aluminum Slotted Angle Crates

F1884-04(2018) Standard Test Methods for Determining Residual Solvents in Packaging Materials

D2860/D2860M-18 Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90° Angle and Constant Stress

D4774-11(2017) Standard Specification for User Applied Drug Labels in Anesthesiology

D7298-06(2017) Standard Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation

F1921/F1921M-12(2018) Standard Test Methods for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs

F3287-17e1 Standard Test Method for Nondestructive Detection of Leaks in Packages by Mass Extraction Method

D6198-18 Standard Guide for Transport Packaging Design

F2825-18 Standard Practice for Climatic Stressing of Packaging Systems for Single Parcel Delivery

F3263-17 Standard Guide for Packaging Test Method Validation

F3300-18 Standard Test Method for Abrasion Resistance of Flexible Packaging Films Using a Reciprocating Weighted Stylus

D8134-18 Standard Guide for Conducting Internal Hydrostatic Pressure Tests on United Nations (UN) IBC Design Types

D3094-18 Standard Practice for Seepage Rate of Aerosol Products

D3076-18 Standard Practice for Effective Crimping on Outside Crimped Valves of Aerosol Containers

D3070-18 Standard Practice for Rapid Pressure Determination of Pressurized Products

D6534-18 Standard Practice for Determining the Peak Force-to-Actuate of a Mechanical Pump Dispenser

D4334-18 Standard Practice for Determination of the Dip Tube Retention of a Mechanical Pump Dispenser

D3890-18 Standard Practice for Number of Strokes to Prime a Mechanical Pump Dispenser

D6654-18 Standard Practice for Basic Storage Stability of a Mechanical Pump Dispenser

D6536/D6536M-18 Standard Practice for Measuring the Dip Tube Length of a Mechanical Pump Dispenser

D6535/D6535M-18 Standard Practice for Determining the Dip Tube Length of a Mechanical Pump Dispenser

D3474-90(2018) Standard Practice for Calibration and Use of Torque Meters Used in Packaging Applications

D2658-18 Standard Test Method for Determining Dimensions of Fiberboard Boxes

D1434-82(2015)e1 Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting

D3330/D3330M-04(2018) Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape

D2063/D2063M-10(2018) Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures Using Non-Automated (Manual) Torque Testing Equipment

F1308-98(2018) Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products

F34-13(2018) Standard Practice for Construction of Test Cell for Liquid Extraction of Flexible Barrier Materials

D6039/D6039M-18 Standard Specification for Open and Covered Wood Crates

F2203-13(2018) Standard Test Method for Linear Measurement Using Precision Steel Rule

F2251-13(2018) Standard Test Method for Thickness Measurement of Flexible Packaging Material

F2250-13(2018) Standard Practice for Evaluation of Chemical Resistance of Printed Inks and Coatings on Flexible Packaging Materials

F2217/F2217M-13(2018) Standard Practice for Coating/Adhesive Weight Determination

F2252/F2252M-13(2018) Standard Practice for Evaluating Ink or Coating Adhesion to Flexible Packaging Materials Using Tape

D6199-18a Standard Practice for Quality of Wood Members of Containers and Pallets

D8233-19 Standard Guide for Packaging and Labeling of Consumer Resin Cannabis Products for Sale to Adult Consumers, Legally Authorized Medical Users, and Caregivers in a Business-to-Consumer Retail Environment (Retailers)

D8250-19 Standard Practice for Applying a Hazard Analysis Critical Control Points (HACCP) System for Cannabis Consumable Products

D8245-19 Standard Guide for Disposal of Resin-Containing Cannabis Raw Materials and Downstream Products

D8219-19 Standard Guide for Cleaning and Disinfection at a Cannabis Cultivation Center

D3611-06(2019) Standard Practice for Accelerated Aging of Pressure-Sensitive Tapes

D3815/D3815M-05(2019) Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Open-Flame Carbon-Arc Exposure Apparatus

D5105-05(2019) Standard Practice for Performing Accelerated Outdoor Weathering of Pressure-Sensitive Tapes Using Concentrated Natural Sunlight

D6551/D6551M-05(2019) Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus

D6252/D6252M-98(2019) Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle

F3375-19 Standard Test Method for Assessing Non-Metered Restricted Delivery Systems for Liquid Consumer Products

F874-98(2019) Standard Test Method for Temperature Measurement and Profiling for Microwave Susceptors

F1349-08(2019) Standard Test Method for Nonvolatile Ultraviolet (UV) Absorbing Extractables from Microwave Susceptors

F1317-98(2019) Standard Test Method for Calibration of Microwave Ovens

F1519-98(2019) Standard Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Used to Heat Food Products

F1500-98(2019) Standard Test Method for Quantitating Non-UV-Absorbing Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as Food Simulants

F1416-96(2019) Standard Guide for Selection of Time-Temperature Indicators

D3111-19 Standard Practice for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test

D4577-19 Standard Test Method for Compression Resistance of a Container Under Constant Load

D8229-19 Standard Guide for Corrective Action and Preventive Action (CAPA) for the Cannabis Industry

D4003-98(2019)e1 Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems

D6055-96(2019) Standard Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates

D5375/D5375M-98(2019) Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock

D5264-98(2019) Standard Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester

D6195-03(2019) Standard Test Methods for Loop Tack

D6295/D6295M-98(2019) Standard Test Method for Dispensability of Light–Duty Pressure–Sensitive Film Tape

D3759/D3759M-05(2019) Standard Test Method for Breaking Strength and Elongation of Pressure-Sensitive Tape

D3715/D3715M-98(2019) Standard Practice for Quality Assurance of Pressure-Sensitive Tapes

D3833/D3833M-96(2019) Standard Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes

D7790-19 Standard Guide for Preparation of Plastic Packagings Containing Liquids for United Nations (UN) Drop Testing

D8286-19 Standard Guide for Processing Cannabis Product Complaints

D8282-19 Standard Practice for Laboratory Test Method Validation and Method Development

F2096-11(2019) Standard Test Method for Detecting Gross Leaks in Packaging by Internal Pressurization (Bubble Test)

D3985-17 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor

D3654/D3654M-06(2019) Standard Test Methods for Shear Adhesion of Pressure-Sensitive Tapes

F2475-20 Standard Guide for Biocompatibility Evaluation of Medical Device Packaging Materials

D8218-20 Standard Guide for Intrusion Detection System (IDS)

D8217-20 Standard Guide for Access Control System

D8205-20 Standard Guide for Video Surveillance System

D8342/D8342M-21 Standard Test Method for Measuring the Probability of a Full Length Burn on a Cannabis/Hemp Pre-roll

D8400-21 Standard Guide for Assessing Spoilage of Hemp Seed Intended for Human Consumption

D8220-20 Standard Guide for Conducting Recall/Removal Procedures for Products in the Cannabis Industry

D3103-20 Standard Test Method for Thermal Insulation Performance of Distribution Packages

F2054/F2054M-13(2020) Standard Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization Within Restraining Plates

E171/E171M-11(2020) Standard Practice for Conditioning and Testing Flexible Barrier Packaging

F2824-10(2020) Standard Test Method for Mechanical Seal Strength Testing for Round Cups and Bowl Containers with Flexible Peelable Lids

F2981-15(2020) Standard Test Method for Verifying Nonporous Flexible Barrier Material Resistance to the Passage of Air

F1140/F1140M-13(2020)e1 Standard Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages

D3121-17 Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball

D6398-08(2014) Standard Practice to Enhance Identification of Drug Names on Labels

D4675-14a Standard Guide for Selection and Use of Flat Strapping Materials1

D4919-17 Standard Guide for Testing of Hazardous Materials (Dangerous Goods) Packagings

D5330/D5330M-06(2020) Standard Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced

D6123/D6123M-97(2020) Standard Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking

D6573/D6573M-13(2020) Standard Specification for General Purpose Wirebound Shipping Boxes

D6881/D6881M-03(2020) Standard Classification for Standard Plastics Industry Bulk Box/Pallet Unit Size Classified By Bulk Density

D3813/D3813M-98(2020) Standard Test Method for Curling, Twisting, and Tubing on Unwind of Pressure-Sensitive Tapes

D3889/D3889M-96(2020) Standard Test Method for Adherence to Linerboard of Pressure-Sensitive Tape at Low Temperature

D3816/D3816M-96(2020) Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes

D3652/D3652M-01(2020) Standard Test Method for Thickness of Pressure-Sensitive Tapes

D5750/D5750M-95(2020) Standard Guide for Width and Length of Pressure-Sensitive Tape

D5118/D5118M-15(2020) Standard Practice for Fabrication of Fiberboard Shipping Boxes

D5486/D5486M-06(2020) Standard Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing

D5728-12(2020) Standard Practices for Securement of Cargo in Intermodal and Unimodal Surface Transport

D6463/D6463M-06(2020) Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading

D7387-20 Standard Test Method for Vibration Testing of Intermediate Bulk Containers (IBCs) Used for Shipping Liquid Hazardous Materials (Dangerous Goods)

D7660-20 Standard Guide for Conducting Internal Pressure Tests on United Nations (UN) Packagings

D7887-20 Standard Guide for Selection of Substitute, Non-hazardous, Liquid Filling Substances for Packagings Subjected to the United Nations Performance Tests

D5458-95(2020) Standard Test Method for Peel Cling of Stretch Wrap Film

E398-20 Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement

D5459-95(2020) Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film

D5663-15(2020) Standard Guide for Validating Recycled Content in Packaging Paper and Paperboard

D5833-12(2020) Standard Guide for Source Reduction Reuse, Recycling, or Disposal of Steel Cans

F3004-13(2020) Standard Test Method for Evaluation of Seal Quality and Integrity Using Airborne Ultrasound

F2338-09(2020) Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method

D5416-95(2020) Standard Test Method for Evaluating Abrasion Resistance of Stretch Wrap Films by Vibration Testing

D5415-95(2020) Standard Test Method for Evaluating Load Containment Performance of Stretch Wrap Films by Vibration Testing

D5414-95(2020) Standard Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films

D6254/D6254M-20 Standard Specification for Wirebound Pallet-Type Wood Boxes

D8334/D8334M-20 Standard Practice for Sampling of Cannabis/Hemp Post-Harvest Batches for Laboratory Analyses

F2622-20 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using Various Sensors

D3078-02(2021)e1 Standard Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission

F2714-08(2021) Standard Test Method for Oxygen Headspace Analysis of Packages Using Fluorescent Decay

F2095-07(2021) Standard Test Methods for Pressure Decay Leak Test for Flexible Packages With and Without Restraining Plates

F2228-13(2021) Standard Test Method for Non-Destructive Detection of Leaks in Packaging Which Incorporates Porous Barrier Material by CO2 Tracer Gas Method

F2227-13(2021) Standard Test Method for Non-Destructive Detection of Leaks in Non-sealed and Empty Packaging Trays by CO2 Tracer Gas Method

D5276-19 Standard Test Method for Drop Test of Loaded Containers by Free Fall

F2029-16(2021) Standard Practices for Making Laboratory Heat Seals for Determination of Heat Sealability of Flexible Barrier Materials as Measured by Seal Strength

D880-92(2021) Standard Test Method for Impact Testing for Shipping Containers and Systems

D2221-01(2021) Standard Test Method for Creep Properties of Package Cushioning Materials

D1596-14(2021) Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material

D4168-95(2021) Standard Test Methods for Transmitted Shock Characteristics of Foam-in-Place Cushioning Materials

D6537-00(2021) Standard Practice for Instrumented Package Shock Testing For Determination of Package Performance

D5077-90(2021) Standard Terminology Relating to Electrostatic Discharge (ESD) Packaging Materials

D6653/D6653M-13(2021) Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method

D8410-21 Standard Specification for Evaluation of Cellulosic-Fiber-Based Packaging Materials and Products for Compostability in Municipal or Industrial Aerobic Composting Facilities

F2559/F2559M-21 Standard Guide for Writing a Specification for Sterilizable Peel Pouches

F1608-21 Standard Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method)

F88/F88M-21 Standard Test Method for Seal Strength of Flexible Barrier Materials

F1278-96(2021)e1 Standard Guide for Use and Handling of Flexible Retort Food Pouches in the Processing Environment

F1980-21 Standard Guide for Accelerated Aging of Sterile Barrier Systems and Medical Devices

D8417-21 Standard Guide for Sampling of Hempseed Intended for Human Consumption

D8409-21 Standard Guide for Conducting Stacking Tests on UN Packagings Using Guided or Unguided Loads

D5445-21 Standard Practice for Pictorial Markings for Handling of Goods

D8403-21 Standard Practice for Certificate Programs within the Cannabis and Hemp Industries

D8347-21a Standard Guide for Requirements for Analytical Laboratory Related Professions Within the Cannabis and Hemp Industries

D8346-21a Standard Guide for Requirements for Quality Related Professions Within the Cannabis and Hemp Industries

D8348-21a Standard Guide for Requirements for Transportation and Logistics Related Professions Within the Cannabis and Hemp Industries

D4169-22 Standard Practice for Performance Testing of Shipping Containers and Systems

D8441/D8441M-22 Standard Specification for International Symbol for Identifying Consumer Products Containing Intoxicating Cannabinoids

D8270-22a Standard Terminology Relating to Cannabis

F392/F392M-21 Standard Practice for Conditioning Flexible Barrier Materials for Flex Durability

D3811/D3811M-21a Standard Test Method for Unwind Force of Pressure-Sensitive Tapes

D685-22 Standard Practice for Conditioning Paper and Paper Products for Testing

D1968-22 Standard Terminology Relating to Paper and Paper Products

D4727/D4727M-22 Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes

D5168-22 Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers

D5487-16(2022) Standard Test Method for Simulated Drop of Loaded Containers by Shock Machines

D5570/D5570M-10(2022) Standard Test Method for Water Resistance of Tape and Adhesives Used as Box Closure

D7030-04(2022) Standard Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine

D4728-17(2022) Standard Test Method for Random Vibration Testing of Shipping Containers

D4332-22 Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing

F2638-22 Standard Test Method for Using Aerosol Filtration for Measuring the Performance of Porous Packaging Materials as a Surrogate Microbial Barrier

D8450-22 Standard Specification for Environmental Conditions While Packaging Cannabis/Hemp Flower

D1974/D1974M-22 Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes

D8440-22 Standard Specification for Food Safety and Quality of Hempseed Products Intended for Human Consumption

F904-22 Standard Practice for Separation of Plies for Bond Strength of Laminated Flexible Materials

D8398-22 Standard Practice for Management Responsibilities in Managing a Quality Management System (QMS)

D8433-22 Standard Specification for Food Safety and Quality of Hempseed Intended for Dehulling or Oil Extraction Food Purposes