F3527-21 Standard Guide for Assessing Risks Related to Implementation of Exoskeletons in Task-Specific Environments
C1908-21 Standard Test Method for Pummel Adhesion Testing of Two-ply Laminated Architectural Glass
F3326-21 Standard Specification for Flame Mitigation Devices on Portable Fuel Containers
E595-15(2021) Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
E2311-04(2021) Standard Practice for QCM Measurement of Spacecraft Molecular Contamination in Space
E2802/E2802M-21e1 Standard Test Method for Evaluating Response Robot Mobility Using Variable Hurdle Obstacles
D5041-98(2019) Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Joints
F2429-15(2021) Standard Terminology Relating to Aerospace Transparent Materials and Enclosures
D5572-95(2019) Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products
F1863-16(2021) Standard Test Method for Measuring the Night Vision Goggle-Weighted Transmissivity of Transparent Parts
F1159-16e1 Standard Practice for Design of Amusement Rides and Devices that are Outside the Purview of Other F24 Design Standards
D6586-03(2021) Standard Practice for the Prediction of Contaminant Adsorption on GAC in Aqueous Systems Using Rapid Small-Scale Column Tests
D5832-98(2021) Standard Test Method for Volatile Matter Content of Activated Carbon Samples
D4607-14(2021) Standard Test Method for Determination of Iodine Number of Activated Carbon
D6781-02(2021) Standard Guide for Carbon Reactivation
F2369-20 Standard Safety Specification for Non-Integral Firearm Locking Devices
F17-20 Standard Terminology Relating to Primary Barrier Packaging
F3432-20a Standard Practice for Powerplant Instruments
F3470-20 Standard Guide for A-UGV Capabilities
C1900-20 Standard Practice for Weathering and Evaluation of Laminated Glass
F2476-20 Standard Test Method for the Determination of Carbon Dioxide Gas Transmission Rate (CO
D6179-20 Standard Test Methods for Rough Handling of Unitized Loads and Large Shipping Cases and Crates
F1920-20 Standard Test Method for Performance of Rack Conveyor Commercial Dishwashing Machines
F3457-20 Standard Guide for Aircraft Certification Education Standards for Engineers and Professionals in Aerospace Industry
F3443-20 Standard Practice for Load Handling When Using an Exoskeleton
F1927-20 Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector
F1495-20 Standard Specification for Combination Oven Electric or Gas Fired
F1696-20 Standard Test Method for Energy Performance of Stationary-Rack, Door-Type Commercial Dishwashing Machines
D642-20 Standard Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads
F793/F793M-20 Standard Classification of Wall Coverings by Use Characteristics
D8365-20 Standard Test Method for Corrosion of Metal Produced by Contact with Leather
F3278-20 Standard Performance Specifications and Test Methods for Hand-Held Metal Detectors Used in Safety and Security
F400-20 Standard Consumer Safety Specification for Lighters
F2201-20 Standard Consumer Safety Specification for Utility Lighters
F1307-20 Standard Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor
C1422/C1422M-20a Standard Specification for Chemically Strengthened Flat Glass
F3176-20 Standard Specification for Special Needs Shopping Carts
F3478-20 Standard Practice for Development of a Durability and Reliability Flight Demonstration Program for Low-Risk Unmanned Aircraft Systems (UAS) under FAA Oversight
F3474-20 Standard Practice for Establishing Exoskeleton Functional Ergonomic Parameters and Test Metrics
D8314-20 Standard Guide for Performance Testing of Applied Stretch Films and Stretch Wrapping
F3313-20 Standard Test Method for Determining Impact Attenuation of Playground Surfaces Within the Use Zone of Playground Equipment as Tested in the Field
F3020-20 Standard Performance Specifications and Test Methods for Hand-Worn Metal Detectors Used in Safety and Security
D3530-20 Standard Test Method for Volatiles Content of Composite Material Prepreg
D5639/D5639M-20 Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements
C721-20 Standard Test Methods for Estimating Average Particle Size of Alumina and Silica Powders by Air Permeability
F2075-20 Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment
D4265-21 Standard Guide for Evaluating Stain Removal Performance in Home Laundering
F3358-20 Standard Practice for Labeling and Information for Exoskeletons
F2238-20 Standard Test Method for Performance of Rapid Cook Ovens
D3475-20 Standard Classification of Child-Resistant Packages
D6633-18 Standard Practice for Basic Functional Stability of a Mechanical Pump Dispenser
F3120/F3120M-20 Standard Specification for Ice Protection for General Aviation Aircraft
F1446-20 Standard Test Methods for Equipment and Procedures Used in Evaluating the Performance Characteristics of Protective Headgear
C813-20 Standard Test Method for Hydrophobic Contamination on Glass by Contact Angle Measurement
F2874-20 Standard Specification for One Time Use Portable Emergency Fuel Containers (PEFC) for Use by Consumers
F3392-20 Standard Practice for Exoskeleton Wearing, Care, and Maintenance Instructions
C288-20 Standard Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide
D7250/D7250M-20 Standard Practice for Determining Sandwich Beam Flexural and Shear Stiffness
D4335-18 Standard Practice for Determination of Component Retention of a Mechanical Pump Dispenser
E3003-20 Standard Practice for Body Armor Wearer Measurement and Fitting of Armor
D4649-20 Standard Guide for Use of Stretch Films and Wrapping Application
D7136/D7136M-20 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
F3496-20 Standard Specification for Polyaromatic Hydrocarbon (PAH) Content in Synthetic Turf Infill
C1525-18 Standard Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching
D4336-18 Standard Practice for Determination of the Output Per Stroke of a Mechanical Pump Dispenser
F1249-20 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
F3499-21 Standard Test Method for Confirming the Docking Performance of A-UGVs
F1141/F1141M-20 Standard Specification for Wall Coverings
D6647-18 Standard Test Method for Determination of Acid Soluble Iron via Atomic Absorption
D4333/D4333M-18 Standard Practice for Compatibility of Mechanical Pump Dispenser Components
F3189-20 Standard Test Method for Measuring Force Reduction, Vertical Deformation, and Energy Restitution of Synthetic Turf Systems Using the Advanced Artificial Athlete
D8335-20 Standard Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials
D1183-03(2019) Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
F2748-19 Standard Specification for Airsoft Guns
D1184-98(2020) Standard Test Method for Flexural Strength of Adhesive Bonded Laminated Assemblies
F319-19 Standard Practice for Polarized Light Detection of Flaws in Aerospace Transparency Heating Elements
F1303-04(2021) Standard Specification for Sheet Vinyl Floor Covering with Backing
F1936-19 Standard Specification for Impact Attenuation of Turf Playing Systems as Measured in the Field
D6880/D6880M-19 Standard Specification for Wood Boxes
C1366-19 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures
C1499-19 Standard Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
F548-19 Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics
F3164-19 Standard Specification for Eye Protectors for Racket Sports (Racquetball, Squash, Tennis)
F1447-18 Standard Specification for Helmets Used in Recreational Bicycling or Roller Skating
F3401-19 Standard Test Method for Wax Binder Removal from Equestrian Synthetic Track Surfaces
D7998-19 Standard Test Method for Measuring the Effect of Temperature on the Cohesive Strength Development of Adhesives using Lap Shear Bonds under Tensile Loading
F917-19 Standard Specification for Commercial Food Waste Disposers
F953-19 Standard Specification for Commercial Dishwashing Machines (Stationary Rack, Dump Type) Chemical Sanitizing
F2460-19 Standard Practice for Special Requirements for Bumper Boats
F2747-19 Standard Guide for Construction of Sand-based Rootzones for Golf Putting Greens and Tees
F2711-19 Standard Test Methods for Bicycle Frames
D3532/D3532M-19 Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg
D8284-19 Standard Test Method for Determination of the Total Alkalinity in Sulfated, Sulfonated Oils and Fatliquors
C1446-19 Standard Test Method for Measuring Consistency of Self-Flowing Castable Refractories
F1514-19 Standard Test Method for Measuring Heat Stability of Resilient Flooring by Color Change
F803-19 Standard Specification for Eye Protectors for Selected Sports
F2085-19 Standard Consumer Safety Specification for Portable Bed Rails
F1164-19 Standard Test Method for Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress
F3016/F3016M-19 Standard Test Method for Surrogate Testing of Vehicle Impact Protective Devices at Low Speeds
D8285/D8285M-19 Standard Practice for Compressive Properties of Tapered and Stepped Joints of Polymer Matrix Composite Laminates by Sandwich Construction Long Beam Flexure
D6507-19 Standard Practice for Fiber Reinforcement Orientation Codes for Composite Materials
F428-19 Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
F2909-19 Standard Specification for Continued Airworthiness of Lightweight Unmanned Aircraft Systems
D1781-98(2021) Standard Test Method for Climbing Drum Peel for Adhesives
F2375-09(2017) Standard Practice for Design, Manufacture, Installation and Testing of Climbing Nets and Netting/Mesh used in Amusement Rides, Devices, Play Areas and Attractions
F3498-21 Standard Practice for Developing Simplified Fatigue Load Spectra
F2861-20 Standard Test Method for Enhanced Performance of Combination Oven in Various Modes
F99-21 Standard Guide for Writing a Specification for Flexible Barrier Rollstock Materials
F3397/F3397M-21 Standard Practice for Aeroplane Turbine Fuel System Hot Weather Operations
F1250-20 Standard Specification for Stationary Upright and Recumbent Exercise Bicycles and Upper and Total Body Ergometers
F3431-21 Standard Specification for Determining Flammability of Materials for Recreational Camping Tents and Warning Labels for Associated Hazards
F3105-20 Standard Specification for Externally Loaded Strength Training Equipment, Strength Training Benches and External Weight Storage Equipment
D7522/D7522M-21 Standard Test Method for Pull-Off Strength for FRP Laminate Systems Bonded to Concrete or Masonry Substrates
D7914/D7914M-21 Standard Test Method for Strength of Fiber Reinforced Polymer (FRP) Bent Bars in Bend Locations
F3503-21 Standard Test Method for Breaking Strength of Slalom Water Skis
D2674-72(2021) Standard Methods of Analysis of Sulfochromate Etch Solution Used in Surface Preparation of Aluminum
F1861-21 Standard Specification for Resilient Wall Base
F801-21 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
F3104-21 Standard Test Methods for Evaluating Design and Performance Characteristics of Externally Loaded Strength Training Equipment, Strength Training Benches and External Weight Storage Equipment
F1361-21 Standard Test Method for Performance of Open Vat Fryers
F1864-21 Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
F3398-21 Standard Specification for Face and Ear Protective Devices for Air Soft Sports
F320-21 Standard Test Method for Hail Impact Resistance of Aerospace Transparent Enclosures
F1487-21 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
F330-21 Standard Test Method for Bird Impact Testing of Aerospace Transparent Enclosures
E2854/E2854M-21 Standard Test Method for Evaluating Response Robot Radio Communications Line-of-Sight Range
F520-21 Standard Test Method for Environmental Resistance of Aerospace Transparencies to Artificially Induced Exposures
F1694-21 Standard Guide for Composing Walkway Surface Investigation, Evaluation and Incident Report Forms for Slips, Stumbles, Trips, and Falls
F3514-21 Standard Guidance for Space Data Exchange to Support Integration of Space Operations into Air Traffic Management
F1515-21 Standard Test Method for Measuring Light Stability of Resilient Flooring by Color Change
F2144-21 Standard Test Method for Performance of Large Open Vat Fryers
F3065/F3065M-21a Standard Specification for Aircraft Propeller System Installation
F50-21 Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
F2275-21 Standard Practice for Treestand Manufacturer Quality Assurance Program
E3276/E3276M-21 Standard Test Method for Assessing Impact Energy and Precision of Direct-fire, Single-projectile Less Lethal Impact Rounds Used by Public Safety Officers
F2948-21 Standard Guide to Walkway Auditor Qualifications
F1964-21 Standard Test Method for Performance of Pressure Fryers
C417-21 Standard Test Method for Thermal Conductivity of Unfired Monolithic Refractories
F25/F25M-21 Standard Test Method for Sizing and Counting Airborne Particulate Contamination in Cleanrooms and Other Dust-Controlled Areas
F1252-21 Standard Test Method for Measuring Optical Reflectivity of Transparent Materials
D8372-21 Standard Guide for Cannabis/Hemp Extract Vaporizers
F1482-21 Standard Practice for Installation and Preparation of Panel Type Underlayments to Receive Resilient Flooring
C1036-21 Standard Specification for Flat Glass
E834-21 Standard Practice for Determining Vacuum Chamber Gaseous Environment Using a Cold Finger
F2387-21 Standard Specification for Manufactured Safety Vacuum Release Systems (SVRS) for Swimming Pools, Spas and Hot Tubs
F3416-21 Standard Guide for Using Fourier Transform Infrared Spectrometry to Evaluate Synthetic Equine Surface Components
F3133-21 Standard Practice for Classification, Design, Manufacture, Construction, Maintenance, and Operation of Stationary Wave Systems
F2927-21 Standard Test Method for Door Systems Subject to Airblast Loadings
F1979-17(2021) Standard Specification for Projectiles Used in the Sport of Paintball
F2773-13(2021) Standard Practice for Transfilling Compressed Air or Nitrogen and Safe Handling of Small Paintball Cylinders
F2765-14(2021) Standard Specification for Total Lead Content in Synthetic Turf Fibers
D8373-21 Standard Guide for Cannabis/Hemp Flower Vaporizers
D8244-21a Standard Guide for Analytical Laboratory Operations Supporting the Cannabis/Hemp Industry
D8061-21 Standard Practice for Handling, Transportation, and Storage of 2-Bromo-3,3,3-Trifluoro-1-Propene (CF
D7326-21 Standard Practice for Handling, Transportation, and Storage of HFC Blend B (CH
D6127-21 Standard Practice for Handling, Transportation, and Storage of HFC-23 (Trifluoromethane, CHF
D6126/D6126M-21 Standard Specification for HFC-23 (Trifluoromethane, CHF
F3445-21 Standard Specification for Performance Requirements when Evaluating Slip Resistance of Protective (Safety) Footwear using ASTM F2913 Whole Shoe Test Method
D7323-21 Standard Practice for Handling, Transportation, and Storage of IG-100 (Nitrogen)
F3460-21 Standard Test Method for Seam Measurement Procedure for Baseballs and Softballs
D7815-21 Standard Practice for Handling, Transportation, and Storage of Halon 1211, Bromochlorodifluoromethane (CF
D7325-21 Standard Practice for Handling, Transportation, and Storage of IG-541 N
D7122-21 Standard Specification for HCFC Blend B (CF
D6065-21 Standard Practice for Handling, Transportation, and Storage of HFC-227ea 1,1,1,2,3,3,3-Heptafluoropropane (CF
D6541-21 Standard Specification for HFC-236fa, 1,1,1,3,3,3–Hexafluoropropane, (CF
F2030-21 Standard Specification for Paintball Cylinder Burst Disk Assemblies
D7327-21 Standard Specification for HFC Blend B (CH
D7123-21 Standard Practice for Handling, Transportation, and Storage of HCFC Blend B (CF
D6268-21 Standard Practice for Handling, Transportation, and Storage of HFC-125, Pentafluoroethane (C
D6231/D6231M-21 Standard Specification for HFC-125 (Pentafluoroethane, C
D8376-21 Standard Classification for Cannabis/Hemp Extract Vaporizers
D5159-21 Standard Guide for Dusting Attrition of Granular Activated Carbon
D7205/D7205M-21 Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
F1882-15 Standard Specification for Residential Basketball Systems
D8060-21 Standard Specification for 2-Bromo-3,3,3-Trifluoro-1-Propene (CF
D6427-21 Standard Practice for Handling, Transportation, and Storage of HFC-236fa, 1,1,1,3,3,3-Hexafluoropropane (CF
D7385-21 Standard Guide for Estimating Carbon Saturation by Temperature Rise Upon Immersion
D7324-21 Standard Practice for Handling, Transportation, and Storage of IG-55 Ar N
D7673/D7673M-21 Standard Specification for Halon 1211, Bromochlorodifluoromethane (CF
D8357-21 Standard Classification for Cannabis/Hemp Flower Vaporizers
D8374-21 Standard Guide for Personal Cannabis/Hemp Plant Growing Appliances
D5631-21 Standard Practice for Handling, Transportation, and Storage of Halon 1301, Bromotrifluoromethane (CF
D8390-21 Standard Classification for Domestic Cannabis/Hemp Plant Indoor Growing Appliances
E2842-14(2021) Standard Guide for Credentialing for Access to an Incident or Event Site
E3289-21 Standard Guide for Using Equipment and Assays for Field Detection of Fentanyl and Fentanyl-Related Compounds
D8309-21 Standard Guide for Stability Testing of Cannabis-Based Products
E3243-21 Standard Specification for Field Detection Equipment and Assays Used for Fentanyl and Fentanyl-Related Compounds
E3290-21 Standard Test Method for Establishing Performance of Equipment and Assays for Field Detection of Fentanyl and Fentanyl-Related Compounds
F2090-21 Standard Specification for Window Fall Prevention Devices With Emergency Escape (Egress) Release Mechanisms
D6004-21 Standard Test Method for Determining Adhesive Shear Strength of Resilient Flooring and Carpet Adhesives
F431-21 Standard Specification for Air Performance Measurement Plenum Chamber for Vacuum Cleaners
E2592-16 Standard Practice for Evaluating Response Robot Capabilities: Logistics: Packaging for Urban Search and Rescue Task Force Equipment Caches
C363/C363M-16 Standard Test Method for Node Tensile Strength of Honeycomb Core Materials
C480/C480M-16 Standard Test Method for Flexure Creep of Sandwich Constructions
C394/C394M-16 Standard Test Method for Shear Fatigue of Sandwich Core Materials
C364/C364M-16 Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions
F3243-21 Standard Practice for Implementing Communications Impairments on A-UGV Systems
C501-21 Standard Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser
D6701-21 Standard Test Method for Determining Water Vapor Transmission Rates Through Nonwoven and Plastic Barriers
F820-21 Standard Test Method for Measuring Air Performance Characteristics of Central Vacuum Cleaning Systems
C1834-16 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Elevated Temperatures
D3147-21 Standard Test Method for Testing Stop-Leak Additives for Engine Coolants
F558-21 Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners
F1306-21 Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates
F1637-21 Standard Practice for Safe Walking Surfaces
D8308-21 Standard Practice for Cannabis/Hemp Operation Compliance Audits
F2105-21 Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaner Motor/Fan Systems
C584-81(2016) Standard Test Method for Specular Gloss of Glazed Ceramic Whitewares and Related Products
D2295-96(2016) Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading at Elevated Temperatures (Metal-to-Metal)
D2293-96(2016) Standard Test Method for Creep Properties of Adhesives in Shear by Compression Loading (Metal-to-Metal)
D7264/D7264M-21 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
D897-08(2016) Standard Test Method for Tensile Properties of Adhesive Bonds
C607-88(2016) Standard Practice for Coking Large Shapes of Carbon-Bearing Materials
F2441-20 Standard Practice for Labeling of Recreational Camping Tents and Bivouac Sacks
D3528-96(2016) Standard Test Method for Strength Properties of Double Lap Shear Adhesive Joints by Tension Loading
D2651-01(2016) Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding
F109-21 Standard Terminology Relating to Surface Imperfections on Ceramics
D4896-01(2016) Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results
D3658-01(2016) Standard Test Method for Determining the Torque Strength of Ultraviolet (UV) Light-Cured Glass/Metal Adhesive Joints
E2520-21 Standard Practice for Measuring and Scoring Performance of Trace Explosive Chemical Detectors
F3492-21 Standard Consumer Safety Specification for Child Safety Locks and Latches for Use with Cabinet Doors and Drawers
F1646-16 Standard Terminology Relating to Walkway Safety and Footwear
F3458-21 Standard Specification for Marketing, Packaging, and Labeling Adult Magnet Sets Containing Small, Loose, Powerful Magnets (with a Flux Index ≥50 kG2 mm2)
C1649-14(2021) Standard Practice for Instrumental Transmittance Measurement of Color for Flat Glass, Coated and Uncoated
F2343-15(2021) Standard Test Method for Livestock, Meat, and Poultry Evaluation Devices
F2341-05(2021) Standard Practice for User Requirements for Livestock, Meat, and Poultry Evaluation Devices or Systems
F381-16 Standard Safety Specification for Components, Assembly, Use, and Labeling of Consumer Trampolines
F2340-05(2021) Standard Specification for Developing and Validating Prediction Equation(s) or Model(s) Used in Connection with Livestock, Meat, and Poultry Evaluation Device(s) or System(s) to Determine Value
D7386-16 Standard Practice for Performance Testing of Packages for Single Parcel Delivery Systems
F2342/F2342M-15(2021) Standard Specification for Design and Construction of Composition or Quality Constituent Measuring Devices or Systems
F3519-21 Standard Guide for Establishing a Reporting Structure for Exoskeleton Analysis
D1768-89(2016) Standard Test Method for Sodium Alkylbenzene Sulfonate in Synthetic Detergents by Ultraviolet Absorption
F1886/F1886M-16 Standard Test Method for Determining Integrity of Seals for Flexible Packaging by Visual Inspection
D2022-89(2016) Standard Test Methods of Sampling and Chemical Analysis of Chlorine-Containing Bleaches
D2357-11(2016) Standard for Qualitative Classification of Surfactants by Infrared Absorption
D2023-89(2016) Standard Test Method of Analysis for Sodium Toluene Sulfonate in Detergents
C1650-14(2021) Standard Practice for Instrumental Reflectance Measurement of Color for Flat Glass, Coated, and Uncoated
D3598-89(2016) Standard Test Method for Citrate in Synthetic Detergents
D3048-89(2016) Standard Test Method of Assay for Alkaline Protease
F2274-11(2016) Standard Specification for Condition 3 Bicycle Forks
F2273-11(2016) Standard Test Methods for Bicycle Forks
F2899-11(2016) Standard Specification for Condition 1 Bicycle Forks
F2463-15(2021) Standard Terminology for Livestock, Meat, and Poultry Evaluation Systems
D459-16 Standard Terminology Relating to Soaps and Other Detergents
D4251-89(2016) Standard Test Method for Active Matter in Anionic Surfactants by Potentiometric Titration
D2358-16 Standard Test Method for Separation of Active Ingredient from Surfactant and Syndet Compositions
D6465-99(2016) Standard Guide for Selecting Aerospace and General Purpose Adhesives and Sealants
C146-21 Standard Test Methods for Chemical Analysis of Glass Sand
C429-21 Standard Test Method for Sieve Analysis of Raw Materials for Glass Manufacture
D7956/D7956M-16 Standard Practice for Compressive Testing of Thin Damaged Laminates Using a Sandwich Long Beam Flexure Specimen
C623-21 Standard Test Method for Young's Modulus, Shear Modulus, and Poisson's Ratio for Glass and Glass-Ceramics by Resonance
D3049-89(2016) Standard Test Method for Synthetic Anionic Ingredient by Cationic Titration
D3673-89(2016) Standard Test Methods for Chemical Analysis of Alpha Olefin Sulfonates
D4386-95(2016) Standard Practice for Application of Floor Polishes to Maintain Multilayer Composite Tile or Flooring
F3518-21 Standard Guide for Quantitative Measures for Establishing Exoskeleton Functional Ergonomic Parameters and Test Metrics
F3517-21 Standard Practice for Movement Tests When Using an Exoskeleton
C1678-21 Standard Practice for Fractographic Analysis of Fracture Mirror Sizes in Ceramics and Glasses
E3236/E3236M-21 Standard Specification for Ballistic-resistant Barriers Used in Homeland Security or Public Safety Applications
C1773-21 Standard Test Method for Monotonic Axial Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature
D3531/D3531M-16 Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg
F2006-21 Standard Safety Specification for Window Fall Prevention Devices for Non-Emergency Escape (Egress) and Rescue (Ingress) Windows
C502-16 Standard Test Method for Wedging of Flat, Rectangular Ceramic Wall and Floor Tile
F3101-21a Standard Specification for Unsupervised Public Use Outdoor Fitness Equipment
C1576-05(2017) Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Ambient Temperature
C1819-21 Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Elastomeric Inserts
C1337-17 Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures
C1360-17 Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
D5331-03(2016) Standard Test Method for Evaluation of Mechanical Handling of Unitized Loads Secured with Stretch Wrap Films
F3169-16 Standard Test Method for Leak Detection in Blister Packaging by Vacuum Deflection Method by Laser Measurement
D3757-16 Standard Guide for Preparing Specifications for Solvent-based Floor Polishes
D7565/D7565M-10(2017) Standard Test Method for Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures
D5467/D5467M-97(2017) Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam
D2959-95(2017) Standard Test Method for Ethylene Oxide Content of Polyethoxylated Nonionic Surfactants
D1767-89(2017) Standard Test Method for Ethylene Diamine Tetraacetate (EDTA) in Soaps or Synthetic Detergents
D4608-89(2017) Standard Test Method for Citrate in Detergents
D4337-89(2017) Standard Test Methods for Analysis of Linear Detergent Alkylates
D4330-94(2017) Standard Practice for Evaluation of Fiberglass Boat Polish and Wax
D4711-89(2017) Standard Test Method for Sulfonic and Sulfuric Acids in Alkylbenzene Sulfonic Acids
D5547-95(2017) Standard Test Method for Clay and Zeolite in Powdered Laundry Detergents by Atomic Absorption
D4954-89(2017) Standard Test Method for Determination of Nitrilotriacetates in Detergents
D5806-95(2017) Standard Test Method for Disinfectant Quaternary Ammonium Salts by Potentiometric Titration
D8067/D8067M-17 Standard Test Method for In-Plane Shear Properties of Sandwich Panels Using a Picture Frame Fixture
D6256/D6256M-16 Standard Specification for Wood-Cleated Shipping Boxes with Skidded, Load-Bearing Bases
D8085-17 Standard Specification for Non-Aqueous Engine Coolant for Automobile and Light-Duty Service
D3207-17 Standard Test Method for Detergent Resistance of Floor Polish Films
D1436-17 Standard Test Methods for Application of Emulsion Floor Polishes to Substrates for Testing Purposes
D3543-17 Standard Test Method for Metal Glide Adhesion
D2868-17 Standard Test Method for Nitrogen Content (Kjeldahl) and Hide Substance Content of Leather, Wet Blue and Wet White
E2770-17 Standard Guide for Operational Guidelines for Initial Response to Suspected Biological Agents and Toxins
D3790-17 Standard Test Method for Volatile Matter (Moisture) of Leather by Oven Drying
F483-09(2020) Standard Practice for Total Immersion Corrosion Test for Aircraft Maintenance Chemicals
D4103-17 Standard Practice for Preparation of Substrate Surfaces for Coefficient of Friction Testing
D8034/D8034M-17 Standard Test Method for Simulated Service Corrosion Testing of Non-Aqueous Engine Coolants
F3006-20 Standard Specification for Ball Drop Impact Resistance of Laminated Architectural Flat Glazing
F2800-11(2017) Standard Specification for Recirculating Hood System for Cooking Appliances
F2117-10(2017) Standard Test Method for Vertical Rebound Characteristics of Sports Surface/Ball Systems; Acoustical Measurement
F3007-19 Standard Test Method for Ball Drop Impact Resistance of Laminated Architectural Flat Glass
D3164-03(2017) Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading
D2093-03(2017) Standard Practice for Preparation of Surfaces of Plastics Prior to Adhesive Bonding
C557-03(2017) Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
D7446-09(2017) Standard Specification for Structural Insulated Panel (SIP) Adhesives for Laminating Oriented Strand Board (OSB) to Rigid Cellular Polystryene Thermal Insulation Core Materials
D6464-03a(2017) Standard Specification for Expandable Foam Adhesives for Fastening Gypsum Wallboard to Wood Framing
D7840-12(2017) Standard Test Method for Foaming Tendencies of Non-Aqueous Engine Coolants in Glassware
D5752-10(2017) Standard Specification for Supplemental Coolant Additives (SCAs) for Use in Precharging Coolants for Heavy-Duty Engines
D1882-17(2021) Standard Test Method for Effect of Cooling System Chemical Solutions on Organic Finishes for Automotive Vehicles
D7637-10(2021) Standard Test Method for Determination of Glycerin Assay by Titration (Sodium Meta Periodate)
D6129-97(2021) Standard Test Method for Silicon in Engine Coolant Concentrates by Atomic Absorption Spectroscopy
D7638-10(2021) Standard Test Method for Determination of Fatty Acids and Esters in Glycerin
D7714-11(2021) Standard Specification for Glycerin Base Engine Coolant for Automobile and Light-Duty Service
D7640-16(2021) Standard Specification for Engine Coolant Grade Glycerin
D1185-98a(2017) Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping
D7715-12(2021) Standard Specification for Fully-Formulated Glycerin Base Engine Coolant for Heavy-Duty Engines
E2458-17 Standard Practices for Bulk Sample Collection and Swab Sample Collection of Visible Powders Suspected of Being Biological Agents and Toxins from Nonporous Surfaces
D6344-04(2017) Standard Test Method for Concentrated Impacts to Transport Packages
F2372-15(2021) Standard Consumer Safety Performance Specification for Shopping Carts
D8222-21a Standard Guide for Establishing a Quality Management System (QMS) for Consumer Use of Cannabis/Hemp Products
F1113-87(2017) Standard Test Method for Electrochemical Measurement of Diffusible Hydrogen in Steels (Barnacle Electrode)
C1899-21 Standard Test Method for Flexural Strength of Continuous Fiber-Reinforced Advanced Ceramic Tubular Test Specimens at Ambient Temperature
D8320-21 Standard Practice for Implementing an Information Security Program in a Cannabis Operation
F3022-16e1 Standard Test Method for Evaluating the Universal Design of Fitness Equipment for Inclusive Use by Persons with Functional Limitations and Impairments
F1912-21 Standard Specification for Safety of Bean Bag Chairs and Bean Bag Chair Covers
F3338-21 Standard Specification for Design of Electric Engines for General Aviation Aircraft
F833-21 Standard Consumer Safety Performance Specification for Carriages and Strollers
F2508-16e1 Standard Practice for Validation, Calibration, and Certification of Walkway Tribometers Using Reference Surfaces
C832-21 Standard Test Method for Measuring Thermal Expansion and Creep of Refractories Under Load
F2479-17 Standard Guide for Specification, Purchase, Installation and Maintenance of Poured-In-Place Playground Surfacing
F3244-21 Standard Test Method for Navigation: Defined Area
F2048-00(2017) Standard Practice for Reporting Slip Resistance Test Results
D2807-17a Standard Test Method for Chromic Oxide in Leather (Perchloric Acid Oxidation)
E2684-17 Standard Test Method for Measuring Heat Flux Using Surface-Mounted One-Dimensional Flat Gages
E2683-17 Standard Test Method for Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages
F2680-17 Standard Test Methods and Specifications for Bicycle Manually Operated Front Wheel Retention Systems
D2617-17a Standard Test Method for Total Ash in Leather
D3758-95(2017) Standard Practice for Evaluation of Spray-Buff Products on Test Floors
D7478/D7478M-11(2017) Standard Specification for Heavy Duty Sheathed Wood Crates
D7958/D7958M-17 Standard Test Method for Evaluation of Performance for FRP Composite Bonded to Concrete Substrate using Beam Test
C1862-17 Standard Test Method for the Nominal Joint Strength of End-Plug Joints in Advanced Ceramic Tubes at Ambient and Elevated Temperatures
D7617/D7617M-11(2017) Standard Test Method for Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars
D1995-92(2017) Standard Test Methods for Multi-Modal Strength Testing of Autohesives (Contact Adhesives)
D1779-98(2017) Standard Specification for Adhesive for Acoustical Materials
D5356-17a Standard Test Method for pH of Chrome Tanning Solutions
E2800-11(2017) Standard Practice for Characterization of Bacillus Spore Suspensions for Reference Materials
D951-17 Standard Test Method for Water Resistance of Shipping Containers by Spray Method
D896-04(2017) Standard Practice for Resistance of Adhesive Bonds to Chemical Reagents
F2333-04(2017) Standard Test Method for Traction Characteristics of the Athletic Shoe-Sports Surface Interface
F473-09(2017) Standard Specification for Binding Mounting Area Dimensions on Alpine Skis and Bindings
D7967-21 Standard Test Method for Analysis of Chrome Content (as Cr
D3167-10(2017) Standard Test Method for Floating Roller Peel Resistance of Adhesives
D2739-97(2017) Standard Test Method for Volume Resistivity of Conductive Adhesives
D2557-98(2017) Standard Test Method for Tensile-Shear Strength of Adhesives in the Subzero Temperature Range from −267.8 to −55°C (−450 to −67°F)
D903-98(2017) Standard Test Method for Peel or Stripping Strength of Adhesive Bonds
D3933-98(2017) Standard Guide for Preparation of Aluminum Surfaces for Structural Adhesives Bonding (Phosphoric Acid Anodizing)
D5267-97(2017) Standard Test Method for Determination of Extrudability of Cartridge Adhesives
F1459-06(2017) Standard Test Method for Determination of the Susceptibility of Metallic Materials to Hydrogen Gas Embrittlement (HGE)
C1914-21 Standard Test Method for Bake and Boil Testing of Laminated Glass
F3440-21 Standard Test Method for Corrosion of Low-Embrittling Zinc-Nickel Plate by Aircraft Maintenance Chemicals
F2753-21 Standard Practice to Evaluate the Effect of Dynamic Rolling Load over Resilient Floor Covering System
F1918-21 Standard Safety Performance Specification for Soft Contained Play Equipment
F760-93(2017) Standard Specification for Food Service Equipment Manuals
E3132/E3132M-17 Standard Practice for Evaluating Response Robot Logistics: System Configuration
F1832-07(2017) Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
F857-17 Standard Specification for Hot Water and Chemical Sanitizing Commercial Dishwashing Machines, Stationary Rack Type
E2933-21 Standard Specification for Stationary Point Chemical Vapor Detectors (SPCVD) for Homeland Security Applications
E2885-21 Standard Specification for Handheld Point Chemical Vapor Detectors (HPCVD) for Homeland Security Applications
E2992/E2992M-17 Standard Test Method for Evaluating Response Robot Mobility: Traverse Sand Terrain
F3454-21 Standard Practice for Alerting Methods in Aircraft
F3491-21 Standard Practice for Enhanced Indication Methods in Aircraft
D4041/D4041M-05(2017) Standard Practice for Determining Spray Patterns of Mechanical Pump Dispensers
D7247-17 Standard Test Method for Evaluating the Shear Strength of Adhesive Bonds in Laminated Wood Products at Elevated Temperatures
D5656-10(2017) Standard Test Method for Thick-Adherend Metal Lap-Shear Joints for Determination of the Stress-Strain Behavior of Adhesives in Shear by Tension Loading
C1259-21 Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration
D8343/D8343M-21 Standard Practice for Measuring the Physical Properties of Cannabis/Hemp Pre-rolls
F2216-17a Standard Specification for Selectorized Strength Equipment
F2650-17e1 Standard Terminology Relating to Impact Testing of Sports Surfaces and Equipment
D6210-17 Standard Specification for Fully-Formulated Glycol Base Engine Coolant for Heavy-Duty Engines
C1368-18 Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Rate Strength Testing at Ambient Temperature
F2277-17a Standard Test Methods for Evaluating Design and Performance Characteristics of Selectorized Strength Equipment
F2137-19 Standard Practice for Measuring the Dynamic Characteristics of Amusement Rides and Devices
F1957-99(2017) Standard Test Method for Composite Foam Hardness-Durometer Hardness
E2639-12(2018) Standard Test Method for Blast Resistance of Trash Receptacles
D1881-17 Standard Test Method for Foaming Tendencies of Engine Coolants in Glassware
C1275-18 Standard Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature
E2740-12(2018) Standard Specification for Trash Receptacles Subjected to Blast Resistance Testing
F21-20 Standard Test Method for Hydrophobic Surface Films by the Atomizer Test
C1421-18 Standard Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
F539-01(2017) Standard Practice for Fitting Athletic Footwear
E3095-17 Standard Guide for Surrogate Materials for Field Evaluation of Nucleic Acid-Based On-Site Biological Assessment Technologies
E2831/E2831M-11(2018) Standard Guide for Deployment of Blast Resistant Trash Receptacles in Crowded Places
E3131-17 Standard Specification for Nucleic Acid-Based Systems for Bacterial Pathogen Screening of Suspicious Visible Powders
F1900-98(2017) Standard Test Method for Water Resistance of Footwear Using a Walking Step Simulator
F1833-97(2017) Standard Test Method for Comparison of Rearfoot Motion Control Properties of Running Shoes
C1291-18 Standard Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time to Failure for Monolithic Advanced Ceramics
F1436-11(2017) Standard Guide for Center Serving Diameter Dimensions for Archery Bow Strings
F1363-07(2017) Standard Guide for Reduction of Risk of Injury for Archery Overdraws
F1544-11(2017) Standard Specification for Determining the Rating Velocities of a Compound Archery Bow
C16-03(2018) Standard Test Method for Load Testing Refractory Shapes at High Temperatures
D4504-94(2018) Standard Specification for Molded Polyethylene Open-Head-Pails for Industrial Shipping of Nonhazardous Goods
D6255/D6255M-18 Standard Specification for Steel or Aluminum Slotted Angle Crates
F3248-17 Standard Test Method for Determining Vertical Deformation and Area Deflection of Area Elastic, Point Elastic, Combined Elastic and Mixed Elastic Sport and Dance Surfaces
F2040-18 Standard Specification for Helmets Used for Recreational Snow Sports
D8089-17 Standard Practice for Accelerated Heat Aging for Floor Covering Adhesives
D2047-17 Standard Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James Machine
C1863-18 Standard Test Method for Hoop Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramic Composite Tubular Test Specimens at Ambient Temperature Using Direct Pressurization
D2860/D2860M-18 Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90° Angle and Constant Stress
D4252-89(2017) Standard Test Methods for Chemical Analysis of Alcohol Ethoxylates and Alkylphenol Ethoxylates
D7298-06(2017) Standard Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation
F2949-18 Standard Specification for Pole Vault Box Collars
D3039/D3039M-17 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
F3287-17e1 Standard Test Method for Nondestructive Detection of Leaks in Packages by Mass Extraction Method
D6130-11(2018) Standard Test Method for Determination of Silicon and Other Elements in Engine Coolant by Inductively Coupled Plasma-Atomic Emission Spectroscopy
D6198-18 Standard Guide for Transport Packaging Design
F2825-18 Standard Practice for Climatic Stressing of Packaging Systems for Single Parcel Delivery
F1625-00(2018) Standard Specification and Test Method for Rear-Mounted Bicycle Child Carriers
F2153-07(2018) Standard Test Method for Measurement of Backpack Capacity
F1953-10(2018) Standard Guide for Construction and Maintenance of Grass Tennis Courts
F2270-12(2018) Standard Guide for Construction and Maintenance of Warning Track Areas on Athletic Fields
F2568-06(2018) Standard Test Method for Measurement of Sleeping Bags
F2917-12(2018) Standard Specification for Bicycle Trailer Cycles Designed for Human Passengers
F2812-12(2018) Standard Specification for Goggle- and Spectacle-Type Eye Protectors for Selected Motor Sports
F2334-18 Standard Guide for Above Ground Public Use Skatepark Facilities
F1162/F1162M-18 Standard Specification for Pole Vault Landing Systems
C1239-13(2018) Standard Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics
F2480-18 Standard Guide for In-ground Concrete Skatepark
D2866-11(2018) Standard Test Method for Total Ash Content of Activated Carbon
F3263-17 Standard Guide for Packaging Test Method Validation
F1304-18 Standard Test Method for Deflection of Resilient Floor Tile
F1816-18 Standard Safety Specification for Drawstrings on Children's Upper Outerwear
D6534-18 Standard Practice for Determining the Peak Force-to-Actuate of a Mechanical Pump Dispenser
D4334-18 Standard Practice for Determination of the Dip Tube Retention of a Mechanical Pump Dispenser
D3890-18 Standard Practice for Number of Strokes to Prime a Mechanical Pump Dispenser
D6654-18 Standard Practice for Basic Storage Stability of a Mechanical Pump Dispenser
D6536/D6536M-18 Standard Practice for Measuring the Dip Tube Length of a Mechanical Pump Dispenser
D6535/D6535M-18 Standard Practice for Determining the Dip Tube Length of a Mechanical Pump Dispenser
C1273-18 Standard Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures
F2982-18 Standard Specification for Polyester Composition Floor Tile
C1358-18 Standard Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross Section Test Specimens at Ambient Temperatures
F2412-18a Standard Test Methods for Foot Protection
F2106-18 Standard Test Methods for Evaluating Design and Performance Characteristics of Motorized Treadmills
D1002-10(2019) Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
C272/C272M-18 Standard Test Method for Water Absorption of Core Materials for Sandwich Constructions
C1651-11(2018) Standard Test Method for Measurement of Roll Wave Optical Distortion in Heat-Treated Flat Glass
D1101-97a(2018) Standard Test Methods for Integrity of Adhesive Joints in Structural Laminated Wood Products for Exterior Use
F2157-09(2018) Standard Specification for Synthetic Surfaced Running Tracks
F779-12(2018) Standard Test Method for Torsion Characteristic of Alpine Skis
D1488-00(2018) Standard Test Method for Amylaceous Matter in Adhesives
D1583-01(2018) Standard Test Method for Hydrogen Ion Concentration of Dry Adhesive Films
D1579-01(2018) Standard Test Method for Filler Content of Phenol, Resorcinol, and Melamine Adhesives
D1490-01(2018) Standard Test Method for Nonvolatile Content of Urea-Formaldehyde Resin Solutions
D2559-12a(2018) Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions
D3434-00(2018) Standard Test Method for Multiple-Cycle Accelerated Aging Test (Automatic Boil Test) for Exterior Wet Use Wood Adhesives
D4689-12(2018) Standard Specification for Adhesive, Casein-Type
F780-93a(2018) Standard Test Method for Linear Deformation and Breaking Strength of Alpine Skis
D4690-12(2018) Standard Specification for Urea-Formaldehyde Resin Adhesives
D7821-12(2018) Standard Test Method for Field Test Determination of Urea Concentration in Diesel Exhaust Fluid (DEF)
E3109-18 Standard Specification for Protective Gloves Worn by Law Enforcement and Corrections Officers
D5560-95(2018) Standard Test Method for Determination of Neutral Fatty Matter Contained in Fats and Oils
F1062-97(2018) Standard Test Method for Verification of Ski Binding Test Devices
D5564-95(2018) Standard Test Method for Determination of the Total Ammonia Contained in Sulfonated or Sulfated Oils
D5562-95(2018) Standard Test Method for Determination of the Acidity as Free Fatty Acids/Acid Number in the Presence of Ammonium or Triethanolamine Soaps
F2546-07(2018) Standard Test Method for Snowboard Step-in Bindings
C1359-18e1 Standard Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross Section Test Specimens at Elevated Temperatures
F2925-11(2018) Standard Specification for Tenderness Marketing Claims Associated with Meat Cuts Derived from Beef
F3023-18 Standard Test Methods for Evaluating Design and Performance Characteristics of Stationary Upright and Recumbent Exercise Bicycles and Upper and Total Body Ergometers
C322-09(2018) Standard Practice for Sampling Ceramic Whiteware Clays
C326-09(2018) Standard Test Method for Drying and Firing Shrinkages of Ceramic Whiteware Clays
D3897-18 Standard Test Method for Calculation of Basicity of Chrome Tanning Liquors
D2810-18 Standard Test Method for pH of Leather
F2892-18 Standard Specification for Performance Requirements for Soft Toe Protective Footwear (Non-Safety / Non-Protective Toe)
F2413-18 Standard Specification for Performance Requirements for Protective (Safety) Toe Cap Footwear
D1287-11(2020) Standard Test Method for pH of Engine Coolants and Antirusts
F137-08(2018) Standard Test Method for Flexibility of Resilient Flooring Materials with Cylindrical Mandrel Apparatus
F150-06(2018) Standard Test Method for Electrical Resistance of Conductive and Static Dissipative Resilient Flooring
C71-12(2018) Standard Terminology Relating to Refractories
F2034-18 Standard Specification for Sheet Linoleum Floor Covering
F3009-14(2018) Standard Specification for Polyolefin Composition Floor Tile
C181-11(2018) Standard Test Method for Workability Index of Fireclay and High-Alumina Refractory Plastics
C1494-13(2018) Standard Test Methods for Determination of Mass Fraction of Carbon, Nitrogen, and Oxygen in Silicon Nitride Powder
C1445-13(2018) Standard Test Method for Measuring Consistency of Castable Refractory Using a Flow Table
D3330/D3330M-04(2018) Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape
F2397-18 Standard Specification for Protective Headgear Used in Combative Sports
D6013-00(2018) Standard Test Method for Determination of Area Stability of Leather to Laundering
D5343-06(2018) Standard Guide for Evaluating Cleaning Performance of Ceramic Tile Cleaners
C1054-18 Standard Practice for Pressing and Drying Refractory Plastic and Ramming Mix Specimens
E2991/E2991M-17 Standard Test Method for Evaluating Response Robot Mobility: Traverse Gravel Terrain
C1048-18 Standard Specification for Heat-Strengthened and Fully Tempered Flat Glass
D2854-09(2019) Standard Test Method for Apparent Density of Activated Carbon
F309-18 Standard Practice for Liquid Sampling of Noncryogenic Aerospace Propellants
F1647-11(2018) Standard Test Methods for Organic Matter Content of Athletic Field Rootzone Mixes
F1632-03(2018) Standard Test Method for Particle Size Analysis and Sand Shape Grading of Golf Course Putting Green and Sports Field Rootzone Mixes
D899-00(2018) Standard Practice for Applied Weight Per Unit Area of Liquid Adhesive
F1853-11(2018) Standard Test Method for Measuring Sleeping Bag Packing Volume
F1815-11(2018) Standard Test Methods for Saturated Hydraulic Conductivity, Water Retention, Porosity, and Bulk Density of Athletic Field Rootzones
D2556-14(2018) Standard Test Method for Apparent Viscosity of Adhesives Having Shear-Rate-Dependent Flow Properties Using Rotational Viscometry
D2063/D2063M-10(2018) Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures Using Non-Automated (Manual) Torque Testing Equipment
D1875-03(2018) Standard Test Method for Density of Adhesives in Fluid Form
F1932/F1932M-98(2018) Standard Test Method for Measuring Sleeping Bag Loft
D4339-01(2018) Standard Test Method for Determination of the Odor of Adhesives
F1935-01(2018) Standard Test Method for Measuring the Headroom of a Backpacking or Mountaineering Tent
F1934-98(2018) Standard Test Method for Weighing a Backpacking or Mountaineering Tent
F1933-98(2018) Standard Specification for Illustrating the Footprint of a Backpacking or Mountaineering Tent
F2269-11(2018) Standard Guide for Maintaining Warm Season Turfgrasses on Athletic Fields
F2060-00(2018) Standard Guide for Maintaining Cool Season Turfgrasses on Athletic Fields
F2639-18 Standard Practice for Design, Alteration, and Certification of Aircraft Electrical Wiring Systems
F3146-18 Standard Test Method for Impact Attenuation of Turf Playing Systems Designated for Rugby
D6039/D6039M-18 Standard Specification for Open and Covered Wood Crates
F2043-13(2018) Standard Classification for Bicycle Usage
F659-10(2018) Standard Specification for Ski and Snowboard Goggles
F2983-13(2018) Standard Guide for Manufacturers for Labeling and Care Instructions for Wrestling Mats
F2250-13(2018) Standard Practice for Evaluation of Chemical Resistance of Printed Inks and Coatings on Flexible Packaging Materials
F2252/F2252M-13(2018) Standard Practice for Evaluating Ink or Coating Adhesion to Flexible Packaging Materials Using Tape
F1702-10(2018) Standard Test Method for Measuring Impact-Attenuation Characteristics of Natural Playing Surface Systems Using a Lightweight Portable Apparatus
D7888-18 Standard Practice for Evaluating Adhesive and the Effects of Plasticizer Found Within Polyvinyl Chloride-Backed Floor Coverings
E1731-11(2018) Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves
F1023-12(2018) Standard Specification for Dispensers, Powdered Iced Tea
F2990-12(2018) Standard Test Method for Commercial Coffee Brewers
F2432-12(2018) Standard Specification for Ice Making Machines, Icemaker-Dispensers, and Ice Dispensing Equipment
F3013-13(2018) Standard Test Method for Density of Topsoil and Blended Soils In-place by the Core Displacement Method
F1624-12(2018) Standard Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique
D6199-18a Standard Practice for Quality of Wood Members of Containers and Pallets
D3518/D3518M-18 Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate
E1560-18 Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers
E2805-18 Standard Practice for Measurement of the Biological Activity of Ricin
F484-08(2019) Standard Test Method for Stress Crazing of Acrylic Plastics in Contact with Liquid or Semi-Liquid Compounds
C1113/C1113M-09(2019) Standard Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)
F2007-18 Standard Practice for Design, Manufacture, and Operation of Concession Go-Karts and Facilities
F2913-19 Standard Test Method for Measuring the Coefficient of Friction for Evaluation of Slip Performance of Footwear and Test Surfaces/Flooring Using a Whole Shoe Tester
C777-04(2019) Standard Test Method for Sulfide Resistance of Ceramic Decorations on Glass
C735-04(2019) Standard Test Method for Acid Resistance of Ceramic Decorations on Returnable Beer and Beverage Glass Containers
C676-04(2019) Standard Test Method for Detergent Resistance of Ceramic Decorations on Glass Tableware
C1172-19 Standard Specification for Laminated Architectural Flat Glass
C978-04(2019) Standard Test Method for Photoelastic Determination of Residual Stress in a Transparent Glass Matrix Using a Polarizing Microscope and Optical Retardation Compensation Procedures
C927-80(2019)e1 Standard Test Method for Lead and Cadmium Extracted from the Lip and Rim Area of Glass Tumblers Externally Decorated with Ceramic Glass Enamels
F1021-18 Standard Specification for Feeders, Detergent, Rinse Agent, and Sanitizing Agent for Commercial Dishwashing and Glasswashing Machines
C1203-04(2019) Standard Test Method for Quantitative Determination of Alkali Resistance of a Ceramic-Glass Enamel
F939-19 Standard Practice for Selection of Release Torque Values for Alpine Ski Bindings
C1425-19 Standard Test Method for Interlaminar Shear Strength of 1D and 2D Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures
F2916-19 Standard Practice for Environmental Impact Analysis of Commercial Food Service Equipment
F3344-19 Standard Guide for Storage, Use, and Handling of Liquid Rocket Propellants
F3362-18 Standard Guide for Onboard Communication & Safety Systems Personnel Certification
D7337/D7337M-12(2019) Standard Test Method for Tensile Creep Rupture of Fiber Reinforced Polymer Matrix Composite Bars
D8101/D8101M-18 Standard Test Method for Measuring the Penetration Resistance of Composite Materials to Impact by a Blunt Projectile
D7705/D7705M-12(2019) Standard Test Method for Alkali Resistance of Fiber Reinforced Polymer (FRP) Matrix Composite Bars used in Concrete Construction
E2900-19 Standard Practice for Spacecraft Hardware Thermal Vacuum Bakeout
D5751-99(2019) Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products
D4027-98(2019) Standard Test Method for Measuring Shear Properties of Structural Adhesives by the Modified-Rail Test
D3983-98(2019) Standard Test Method for Measuring Strength and Shear Modulus of Nonrigid Adhesives by the Thick-Adherend Tensile-Lap Specimen
D3632-98(2019) Standard Test Method for Accelerated Aging of Adhesive Joints by the Oxygen-Pressure Method
D8233-19 Standard Guide for Packaging and Labeling of Consumer Resin Cannabis Products for Sale to Adult Consumers, Legally Authorized Medical Users, and Caregivers in a Business-to-Consumer Retail Environment (Retailers)
D6325-98(2019) Standard Test Method for Determining Open Assembly Time of Carpet Mastic Adhesives
D4502-92(2019) Standard Test Method for Heat and Moisture Resistance of Wood-Adhesive Joints
F2471-19 Standard Practice for Installation of Thick Poured Lightweight Cellular Concrete Underlayments and Preparation of the Surface to Receive Resilient Flooring
E2566-17a Standard Test Method for Evaluating Response Robot Sensing: Visual Acuity
C198-09(2019) Standard Test Method for Cold Bonding Strength of Refractory Mortar
C179-14(2019) Standard Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens
F2421-19a Standard Test Method for Measurement of Resilient Floor Plank by Dial Gauge
D2570-16 Standard Test Method for Simulated Service Corrosion Testing of Engine Coolants
C1099-07(2019) Standard Test Method for Modulus of Rupture of Carbon-Containing Refractory Materials at Elevated Temperatures
F3298-19 Standard Specification for Design, Construction, and Verification of Lightweight Unmanned Aircraft Systems (UAS)
F2426-13(2018)e1 Standard Guide on Wing Interface Documentation for Powered Parachute Aircraft
F2930-16e1 Standard Guide for Compliance with Light Sport Aircraft Standards
F3196-18 Standard Practice for Seeking Approval for Beyond Visual Line of Sight (BVLOS) Small Unmanned Aircraft System (sUAS) Operations
D6115-97(2019) Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites
F2849-10(2019) Standard Practice for Handling of Unmanned Aircraft Systems at Divert Airfields
F3201-16 Standard Practice for Ensuring Dependability of Software Used in Unmanned Aircraft Systems (UAS)
F3178-16 Standard Practice for Operational Risk Assessment of Small Unmanned Aircraft Systems (sUAS)
F2563-16 Standard Practice for Kit Assembly Instructions of Aircraft Intended Primarily for Recreation
F3198-18 Standard Specification for Light Sport Aircraft Manufacturer’s Continued Operational Safety (COS) Program
F2356-05a(2018) Standard Specification for Production Acceptance Testing System for Lighter-Than-Air Light Sport Aircraft
F2425-05a(2018) Standard Specification for Continued Airworthiness System for Weight-Shift-Control Aircraft
F2839-11(2016) Standard Practice for Compliance Audits to ASTM Standards on Light Sport Aircraft
D8250-19 Standard Practice for Applying a Hazard Analysis Critical Control Points (HACCP) System for Cannabis Consumable Products
F2851-10(2018) Standard Practice for UAS Registration and Marking (Excluding Small Unmanned Aircraft Systems)
F2457-05(2018) Standard Specification for Required Product Information to be Provided with
D8245-19 Standard Guide for Disposal of Resin-Containing Cannabis Raw Materials and Downstream Products
F2242-05(2018) Standard Specification for Production Acceptance Testing System for Powered Parachute Aircraft
D8219-19 Standard Guide for Cleaning and Disinfection at a Cannabis Cultivation Center
F2243-11(2018) Standard Specification for Required Product Information to be Provided with Powered Parachute Aircraft
F3310-18 Standard Specification for Non-Essential Ice Detectors for Aircraft
F1699-96(2016) Standard Classification for Passive Fiber Optic Seals
F2538-07a(2019) Standard Practice for Design and Manufacture of Reciprocating Compression Ignition Engines for Light Sport Aircraft
F946-85(2018) Standard Guide for Establishing Security Seal Control and Accountability Procedures
F3199-16a Standard Guide for Wing Interface Documentation for Weight Shift Control Aircraft
F2317/F2317M-16a Standard Specification for Design of Weight-Shift-Control Aircraft
F2247-18 Standard Test Method for Metal Doors Used in Blast Resistant Applications (Equivalent Static Load Method)
F2447-05(2018) Standard Practice for Production Acceptance Test Procedures for Weight-Shift-Control Aircraft
F2155-01(2017) Standard Specification for Performance of Hasps and Other Attachment Devices for Padlocks or Seals
F1247-89(2018) Standard Specification for Intrusion Resistant Generic Vault Structures
F3205-17 Standard Practice for Independent Audit Program for Light Aircraft Manufacturers
F2348-04(2017) Standard Performance Specification for Privacy Padlocks
F1090-15 Standard Classification for Bank and Mercantile Vault Construction
F1642/F1642M-17 Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings
F2912-17 Standard Specification for Glazing and Glazing Systems Subject to Airblast Loadings
F1448-16 Standard Guide for Selection of Security Technology for Protection Against Counterfeiting, Alteration, Diversion, Duplication, Simulation, and Substitution (CADDSS) of Products or Documents
F2427-05a(2018) Standard Specification for Required Product Information to be Provided with Lighter-Than-Air Light Sport Aircraft
F1468-04a(2018) Standard Practice for Evaluation of Metallic Weapons Detectors for Controlled Access Search and Screening
F967-03(2018) Standard Practice for Security Engineering Symbols
F2401-16 Standard Practice for Security Checkpoint Metal Detector Screening of Persons with Medical Devices
F792-17e1 Standard Practice for Evaluating the Imaging Performance of Security X-Ray Systems
F571-87(2016) Standard Practice for Installation of Exit Devices in Security Areas
F2483-18e1 Standard Practice for Maintenance and the Development of Maintenance Manuals for Light Sport Aircraft
D1611-12(2019) Standard Test Method for Corrosion Produced by Leather in Contact with Metal
A627-03(2019) Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities
D5352-95(2019) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride Ash-Gravimetric, Test Method C
D5350-95(2019) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Titration, Test Method A
D5348-95(2019) Standard Test Method for Determination of the Moisture Content of Sulfonated and Sulfated Oils by Distillation with Xylene
D5551-95(2019) Standard Test Method for Determination of the Cloud Point of Oil
D5353-95(2019) Standard Test Method for Determination of Total Desulfated Fatty Matter
F3296-19 Standard Practice for Commercial Application of Electric Security Fences
F2697-15 Standard Test Methods for Physical Assault on Overhead Horizontal Fixed Barriers for Detention and Correctional Facilities
F3217-17 Standard Guide for Security Fasteners
F3297-19 Standard Practice for Corrections Application for Non-Lethal Electric Security Fences
F2666-16 Standard Specification for Aboveground Portable Pools for Residential Use
F3277-19 Standard Specification for Cantilevered Steel Bunks Used in Detention and Correctional Facilities
F1235-18 Standard Consumer Safety Specification for Portable Hook-On Chairs
F832-90(2016) Standard Classification for Security Seals
F2236-16a Standard Consumer Safety Specification for Soft Infant and Toddler Carriers
F2367-04a(2018) Standard Specification for Labeling for Upright Brooms for Consumer and Institutional Use
F2601-18 Standard Specification for Fire Safety for Candle Accessories
F1938-98(2017) Standard Guide for Safer Use of Movable Soccer Goals
D5553-95(2019) Standard Test Method for Determination of the Unsaponifiable Nonvolatile Matter in Sulfated Oils
F2011-02(2018) Standard Specification for Safety and Performance of Fun-Karts
F2796-19 Standard Specification for Hot Food Holding Tables
F1450-12a(2019) Standard Test Methods for Hollow Metal Swinging Door Assemblies for Detention and Correctional Facilities
F1928-98(2018) Standard Safety Guide for Consumer Recreational Use of Fun-Karts
F3363-19 Standard Specification for Unvented Liquid/Gel Fuel-Burning Portable Devices
F1577-05(2019) Standard Test Methods for Detention Locks for Swinging Doors
D3611-06(2019) Standard Practice for Accelerated Aging of Pressure-Sensitive Tapes
D3815/D3815M-05(2019) Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Open-Flame Carbon-Arc Exposure Apparatus
D7517-19 Standard Specification for Fully-Formulated 1,3 Propanediol (PDO) Base Engine Coolant for Heavy-Duty Engines
F2707-10(2018)e1 Standard Safety Performance Specification for Safe Design and Installation of Field Fabricated Suction-Limiting Vent Systems for Suction Entrapment Prevention in Swimming Pools, Spas, Hot Tubs, and Wading Pools
F2640-18 Standard Consumer Safety Specification for Booster Seats
D3467-04(2020) Standard Test Method for Carbon Tetrachloride Activity of Activated Carbon
F2368-04(2018) Standard Specification for Labeling for Wet Mops for Consumer and Institutional Use
F1643-05(2019) Standard Test Methods for Detention Sliding Door Locking Device Assembly
F1592-12(2019) Standard Test Methods for Detention Hollow Metal Vision Systems
D5105-05(2019) Standard Practice for Performing Accelerated Outdoor Weathering of Pressure-Sensitive Tapes Using Concentrated Natural Sunlight
D6551/D6551M-05(2019) Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus
D6252/D6252M-98(2019) Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle
F2729-18 Standard Consumer Safety Specification for Constant Air Inflatable Play Devices for Home Use
F1758-05(2019) Standard Test Methods for Detention Hinges Used on Detention-Grade Swinging Doors
F1972-19 Standard Guide for Terminology Relating to Candles and Associated Accessory Items
F1915-05(2019) Standard Test Methods for Glazing for Detention Facilities
F2322-12(2019) Standard Test Methods for Physical Assault on Vertical Fixed Barriers for Detention and Correctional Facilities
F2542-05(2019) Standard Test Methods for Physical Assault on Ventilation Grilles for Detention and Correctional Facilities
D7225-13(2019)e1 Standard Guide for Blood Cleaning Efficiency of Detergents and Washer-Disinfectors
C182-19 Standard Test Method for Thermal Conductivity of Insulating Firebrick
D1146-00(2018)e1 Standard Test Method for Blocking Point of Potentially Adhesive Layers
C202-19 Standard Test Method for Thermal Conductivity of Refractory Brick
D2821-19 Standard Test Method for Measuring the Relative Stiffness of Leather by Means of a Torsional Wire Apparatus
E2771-11(2019) Standard Terminology for Homeland Security Applications
F3245-19 Standard Guide for Aircraft Electronics Technician Personnel Certification
F2799-14(2019) Standard Practice for Maintenance of Aircraft Electrical Wiring Systems
F2696-14(2019) Standard Practice for Inspection of Aircraft Electrical Wiring Systems
F2614-19 Standard Specification for Condition 3 Bicycle Frames
F2248-19 Standard Practice for Specifying an Equivalent 3-Second Duration Design Loading for Blast Resistant Glazing Fabricated with Laminated Glass
F2843-19 Standard Specification for Condition 0 Bicycle Frames
F2802-19 Standard Specification for Condition 1 Bicycle Frames
F502-08(2019) Standard Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces
F485-08(2019) Standard Practice for Effects of Cleaners on Unpainted Aircraft Surfaces
F2868-19 Standard Specification for Condition 2 Bicycle Frames
F1104-02(2019) Standard Test Method for Preparing Aircraft Cleaning Compounds, Liquid Type, Water Base, for Storage Stability Testing
F1080-93(2019) Standard Test Method for Determining the Consistency of Viscous Liquids Using a Consistometer
F3366-19 Standard Specification for General Maintenance Manual (GMM) for a small Unmanned Aircraft System (sUAS)
F1605-14(2019) Standard Test Method for Performance of Double-Sided Griddles
F2140-11(2019) Standard Test Method for Performance of Hot Food Holding Cabinets
F2022-01(2019) Standard Test Method for Performance of Booster Heaters
E3212-19 Standard Guide for Selection and Procurement of Protective Gloves Worn by Law Enforcement and Corrections
D3807-98(2019) Standard Test Method for Strength Properties of Adhesives in Cleavage Peel by Tension Loading (Engineering Plastics-to-Engineering Plastics)
D4562-01(2019) Standard Test Method for Shear Strength of Adhesives Using Pin-and-Collar Specimen
D5573-99(2019) Standard Practice for Classifying Failure Modes in Fiber-Reinforced-Plastic (FRP) Joints
F2141-07(2019) Standard Test Method for Performance of Self-Serve Hot Deli Cases
D6105-04(2019) Standard Practice for Application of Electrical Discharge Surface Treatment (Activation) of Plastics for Adhesive Bonding
F2324-13(2019) Standard Test Method for Prerinse Spray Valves
F2142-01(2019) Standard Test Method for Performance of Drawer Warmers
D7896-19 Standard Test Method for Thermal Conductivity, Thermal Diffusivity, and Volumetric Heat Capacity of Engine Coolants and Related Fluids by Transient Hot Wire Liquid Thermal Conductivity Method
F3375-19 Standard Test Method for Assessing Non-Metered Restricted Delivery Systems for Liquid Consumer Products
F2644-07(2019) Standard Test Method for Performance of Commercial Patio Heaters
F1416-96(2019) Standard Guide for Selection of Time-Temperature Indicators
C1027-19 Standard Test Method for Determining Visible Abrasion Resistance of Glazed Ceramic Tile
F3051-14(2019) Standard Test Method for Performance of Cook-and-Hold Ovens
E2352-19 Standard Practice for Aerospace Cleanrooms and Associated Controlled Environments—Cleanroom Operations
D4340-19 Standard Test Method for Corrosion of Cast Aluminum Alloys in Engine Coolants Under Heat-Rejecting Conditions
D928-03(2017) Standard Specification for Sodium Bicarbonate
D1387-89(2019) Standard Test Method for Saponification Number (Empirical) of Synthetic and Natural Waxes
D3498-19a Standard Specification for Adhesives for Field-Gluing Wood Structural Panels (Plywood or Oriented Strand Board) to Wood Based Floor System Framing
C1361-10(2019) Standard Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
D3111-19 Standard Practice for Flexibility Determination of Hot-Melt Adhesives by Mandrel Bend Test
F91-06(2019) Standard Practice for Testing for Leaks in the Filters Associated With Laminar Flow Clean Rooms and Clean Work Stations by Use of a Condensation Nuclei Detector
E2312-11(2019) Standard Practice for Tests of Cleanroom Materials
C1327-15(2019) Standard Test Method for Vickers Indentation Hardness of Advanced Ceramics
D5648-01(2019) Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity)
F1496-13(2019) Standard Test Method for Performance of Convection Ovens
F3376-19 Standard Guide for Core Competencies for Aviation Maintenance Personnel
C1683-10(2019) Standard Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics
C1424-15(2019) Standard Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature
C1468-19a Standard Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature
D3440-13(2019) Standard Guide for Preparing Specifications for Water-Emulsion Floor Polishes
D7389-07(2019) Standard Test Method for Acid Number (Empirical) of Maleic Anhydride (MAH) Grafted Waxes
E3057-19 Standard Test Method for Measuring Heat Flux Using Directional Flame Thermometers with Advanced Data Analysis Techniques
D8229-19 Standard Guide for Corrective Action and Preventive Action (CAPA) for the Cannabis Industry
C1465-08(2019) Standard Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures
D4003-98(2019)e1 Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems
D3837-95(2019) Standard Practice for Preparing a Solution of Alkali–Soluble Resins
F1838-19 Standard Performance Requirements for Adult and Children’s Plastic Chairs for Outdoor Use
C860-15(2019) Standard Test Method for Determining the Consistency of Refractory Castable Using the Ball-In-Hand Test
D2180-17 Standard Test Method for Active Oxygen in Bleaching Compounds
F2687-13(2019) Standard Practice for Life Cycle Cost Analysis of Commercial Food Service Equipment
F1827-13(2019) Standard Terminology Relating to Food Service Equipment
D5439-95(2019) Standard Test Method for Determination of Sediment in Moellon
D5347-19a Standard Test Method for Determination of the Ash Content of Fats and Oils
D6055-96(2019) Standard Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates
D5375/D5375M-98(2019) Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock
D5264-98(2019) Standard Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester
F2717-14(2019) Standard Guide for Development of an Independent Third-Party Verification of Reference Materials
C1145-19 Standard Terminology of Advanced Ceramics
F3356-19a Standard Practice for Conformity Assessment of Metal Detectors Used in Safety and Security
C338-93(2019) Standard Test Method for Softening Point of Glass
C598-93(2019) Standard Test Method for Annealing Point and Strain Point of Glass by Beam Bending
C895-87(2019) Standard Test Method for Lead and Cadmium Extracted from Glazed Ceramic Tile
C693-93(2019) Standard Test Method for Density of Glass by Buoyancy
C1256-93(2019) Standard Practice for Interpreting Glass Fracture Surface Features
D5160-95(2019) Standard Guide for Gas-Phase Adsorption Testing of Activated Carbon
C1350M-96(2019) Standard Test Method for Measurement of Viscosity of Glass Between Softening Point and Annealing Range (Approximately 108 Pa·s to Approximately 1013 Pa·s) by Beam Bending (Metric)
D3759/D3759M-05(2019) Standard Test Method for Breaking Strength and Elongation of Pressure-Sensitive Tape
D3715/D3715M-98(2019) Standard Practice for Quality Assurance of Pressure-Sensitive Tapes
D3833/D3833M-96(2019) Standard Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes
F1913-19 Standard Specification for Vinyl Sheet Floor Covering Without Backing
C689-09(2019) Standard Test Method for Modulus of Rupture of Unfired Clays
C837-09(2019) Standard Test Method for Methylene Blue Index of Clay
C925-09(2019) Standard Guide for Precision Electroformed Wet Sieve Analysis of Nonplastic Ceramic Powders
F2208-08(2019) Standard Safety Specification for Residential Pool Alarms
E423-71(2019) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
F3380-19 Standard Practice for Structural Compliance of Very Light Aeroplanes
C1182-09(2019) Standard Test Method for Determining the Particle Size Distribution of Alumina by Centrifugal Photosedimentation
E3195-19 Standard Guide for Body Armor Program Management
E3187/E3187M-19 Standard Specification for Less Lethal Aerosol Devices Used by Law Enforcement, Corrections, and Other Public Safety Officers
F2264-14(2019) Standard Consumer Safety Specification for Non-Powered Scooters
F3361-18e1 Standard Guide for Classifying Alterations for In-Service Aircraft under FAA Authority Oversight
D7905/D7905M-19e1 Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
E295-82(2019) Standard Test Method for Measured Speed of Oil Diffusion Pumps
F14-80(2019) Standard Practice for Making and Testing Reference Glass-Metal Bead-Seal
F79-69(2019) Standard Specification for Type 101 Sealing Glass
F144-80(2019) Standard Practice for Making Reference Glass-Metal Sandwich Seal and Testing for Expansion Characteristics by Polarimetric Methods
F105-72(2019) Standard Specification for Type 58 Borosilicate Sealing Glass
E307-72(2019) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures
E408-13(2019) Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
F3218-19 Standard Practice for Documenting Environmental Conditions for Utilization with A-UGV Test Methods
F1181-19 Standard Test Method for Measuring Binocular Disparity in Transparent Parts
D1176-14(2019) Standard Practice for Sampling and Preparing Aqueous Solutions of Engine Coolants or Antirusts for Testing Purposes
D5363-16 Standard Specification for Anaerobic Single-Component Adhesives (AN)
D8286-19 Standard Guide for Processing Cannabis Product Complaints
C210-95(2019) Standard Test Method for Reheat Change of Insulating Firebrick
C113-14(2019) Standard Test Method for Reheat Change of Refractory Brick
D8282-19 Standard Practice for Laboratory Test Method Validation and Method Development
F2999-19 Standard Consumer Safety Specification for Adult Jewelry
F861-14a(2019) Standard Specification for Commercial Dishwashing Racks
E349-06(2019)e1 Standard Terminology Relating to Space Simulation
F1919-14(2019) Standard Specification for Griddles, Single-Sided and Double-Sided, Gas and Electric
F1899-14a(2019) Standard Specification for Food Waste Pulper Without Waterpress Assembly
F2898-11(2019) Standard Test Method for Permeability of Synthetic Turf Sports Field Base Stone and Surface System by Non-confined Area Flood Test Method
F2096-11(2019) Standard Test Method for Detecting Gross Leaks in Packaging by Internal Pressurization (Bubble Test)
F3103-14(2019) Standard Specification for Testing Off-Road Motorcycle and ATV Helmets
F733-19 Standard Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method
F1111-08b(2019) Standard Test Method for Corrosion of Low-Embrittling Cadmium Plate by Aircraft Maintenance Chemicals
C297/C297M-16 Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
F3030-13(2019) Standard Test Method for Snowboards with a Channel-Mounting System and Removable Inserts
F2223-19a Standard Guide for ASTM Standards on Playground Surfacing
F3410-19 Standard Test Method for Testing Fiber Rope Used in Water Sports
C577-19 Standard Test Method for Permeability of Refractories
F1169-19 Standard Consumer Safety Specification for Full-Size Baby Cribs
F2710-19 Standard Consumer Safety Performance Specification for Commercial Cribs
E3215-19a Standard Practice for Certification of Less Lethal Aerosol Devices Used by Law Enforcement, Corrections, and Other Public Safety Officers
F3400-19 Standard Test Method for In-situ Testing of Functional Properties of Equine Surfaces: Artificial Surfaces
F3311-19 Standard Practice for Mat Bond Evaluation of Performance and Compatibility for Resilient Flooring System Components Prior to Installation
F2170-19a Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes
D5556-19 Standard Test Method for Determination of the Moisture and Other Volatile Matter Contained in Fats and Oils Used in Fatliquors and Softening Compounds
D5349-19 Standard Test Method for Determination of the Moisture and Volatile Content of Sulfonated, Sulfated Oils and Fatliquors by Oven Method
F3316/F3316M-19 Standard Specification for Electrical Systems for Aircraft with Electric or Hybrid-Electric Propulsion
F3381-19 Standard Practice for Describing Stationary Obstacles Utilized within A-UGV Test Methods
F2396-11(2019) Standard Guide for Construction of High Performance Sand-Based Rootzones for Athletic Fields
F2772-11(2019) Standard Specification for Athletic Performance Properties of Indoor Sports Floor Systems
F2569-11(2019) Standard Test Method for Evaluating the Force Reduction Properties of Surfaces for Athletic Use
C1198-20 Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Sonic Resonance
C1322-15(2019) Standard Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics
F498-19 Standard Test Method for Center Spring Constant and Spring Constant Balance of Alpine Skis
F3383-19a Standard Test Method for Filament Bind of Single Fibers in Synthetic Turf
E2217-12(2019) Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas
C1557-20 Standard Test Method for Tensile Strength and Young's Modulus of Fibers
C1070-01(2020) Standard Test Method for Determining Particle Size Distribution of Alumina or Quartz by Laser Light Scattering
D3166-99(2020) Standard Test Method for Fatigue Properties of Adhesives in Shear by Tension Loading (Metal/Metal)
E2804-11(2020) Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Obstacles: Stairs/Landings
D3433-99(2020) Standard Test Method for Fracture Strength in Cleavage of Adhesives in Bonded Metal Joints
E2830-11(2020) Standard Test Method for Evaluating the Mobility Capabilities of Emergency Response Robots Using Towing Tasks: Grasped Sleds
E2829-11(2020) Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Maneuvering Tasks: Sustained Speed
D3985-17 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor
D6411/D6411M-99(2020) Standard Specification for Silicone Rubber Room Temperature Vulcanizing Low Outgassing Materials
D6396-99(2020) Standard Test Method for Testing of Pipe Thread Sealants on Pipe Tees
D6412/D6412M-99(2020) Standard Specification for Epoxy (Flexible) Adhesive For Bonding Metallic And Nonmetallic Materials
F2966-19 Standard Guide for Snow and Ice Control for Walkway Surfaces
E2803-11(2020) Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Obstacles: Inclined Planes
E2801-11(2020) Standard Test Method for Evaluating Emergency Response Robot Capabilities: Mobility: Confined Area Obstacles: Gaps
C1470-20 Standard Guide for Testing the Thermal Properties of Advanced Ceramics
F1887-14(2019)e1 Standard Test Method for Measuring the Coefficient of Restitution (COR) of Baseballs and Softballs
D2108-10(2020) Standard Test Method for Color of Halogenated Organic Solvents and Their Admixtures (Platinum-Cobalt Scale)
D2294-96(2016) Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
D1121-11(2020) Standard Test Method for Reserve Alkalinity of Engine Coolants and Antirusts
D2251-10(2020) Standard Test Method for Metal Corrosion by Halogenated Organic Solvents and Their Admixtures
D3444-00(2020) Standard Test Method for Total Acid Number of Trichlorotrifluoroethane
D3443-00(2020) Standard Test Method for Chloride in Trichlorotrifluoroethane
D4276-02(2020) Standard Practice for Confined Area Entry
D4080-15(2020) Standard Specification for Trichloroethylene, Technical and Vapor-Degreasing Grade
D4494-95(2020) Standard Test Method for Detecting Residual Odor of Drycleaning Grade Perchloroethylene
D4376-15(2020) Standard Specification for Vapor-Degreasing Grade Perchloroethylene
D4701-00(2020) Standard Specification for Technical Grade Methylene Chloride
D5396-04(2020) Standard Specification for Reclaimed Perchloroethylene
D7716-11a(2020) Standard Test Method for Determination of Residual Methanol in Glycerin by Gas Chromatography
D1516-05(2021) Standard Test Method for Width of Leather
D1814-70(2021) Standard Test Method for Measuring Thickness of Leather Units
D1815-00(2021) Standard Test Method for Water Absorption (Static) of Vegetable Tanned Leather
F2783-20 Standard Practice for Design, Manufacture, Operation, Maintenance, and Inspection of Amusement Rides and Devices, in Canada
F3415-20 Standard Test Method for Triaxial Shear Strength and Cohesion of Equine Sports Surfaces
F1967-19 Standard Consumer Safety Specification for Infant Bath Seats
F2012-18e1 Standard Consumer Safety Performance Specification for Stationary Activity Centers
F3418-20 Standard Test Method for Measurement of Transition Temperatures of Slack Waxes used in Equine Sports Surfaces by Differential Scanning Calorimetry (DSC)
D1304-99(2020)e1 Standard Test Methods for Adhesives Relative to Their Use as Electrical Insulation
D950-03(2020)e1 Standard Test Method for Impact Strength of Adhesive Bonds
F1700-20 Standard Specification for Solid Vinyl Floor Tile
D6208-07(2020) Standard Test Method for Repassivation Potential of Aluminum and Its Alloys by Galvanostatic Measurement
C861-93(2020) Standard Practice for Determining Metric Dimensions of Standard Series Refractory Brick and Shapes
F3417-20 Standard Test Method for Gas Chromatography Analysis of Petroleum Waxes Used in Equestrian Synthetic Surfaces
E2677-20 Standard Test Method for Estimating Limits of Detection in Trace Detectors for Explosives and Drugs of Interest
F2115-19 Standard Specification for Motorized Treadmills
D3654/D3654M-06(2019) Standard Test Methods for Shear Adhesion of Pressure-Sensitive Tapes
F2923-20 Standard Specification for Consumer Product Safety for Children’s Jewelry
D6851-20 Standard Test Method for Determination of Contact pH with Activated Carbon
F3425-20 Standard Guide for Aircraft Electronics Installation Technician Certification
D2207-00(2021) Standard Test Method for Bursting Strength of Leather by the Ball Method
D6656-16(2021) Standard Test Method for Determination of Chromic Oxide in Wet Blue (Perchloric Acid Oxidation)
D6657-16(2021) Standard Test Method for pH of Wet Blue and Wet White
C657-19 Standard Test Method for D-C Volume Resistivity of Glass
D6714-16(2021) Standard Test Method for Chromic Oxide in Ashed Wet Blue (Perchloric Acid Oxidation)
F2475-20 Standard Guide for Biocompatibility Evaluation of Medical Device Packaging Materials
D6659-16(2021) Standard Practice for Sampling and Preparation of Wet Blue and Wet White for Physical and Chemical Tests
F1265-03a(2020) Standard Test Method for Resistance to Impact for Resilient Floor Tile
D7249/D7249M-20 Standard Test Method for Facesheet Properties of Sandwich Constructions by Long Beam Flexure
D7477-16(2021) Standard Test Method for Determining the Area Stability of Wet Blue Submersed in Boiling Water
F3412-20 Standard Terminology Relating to Treestands
F3379-20 Standard Guide for Training for Public Safety Remote Pilot of Unmanned Aircraft Systems (UAS) Endorsement
F3060-20 Standard Terminology for Aircraft
C481-99(2016) Standard Test Method for Laboratory Aging of Sandwich Constructions
F2179-20 Standard Specification for Annealed Soda-Lime-Silicate Glass Containers That Are Produced for Use as Candle Containers
C273/C273M-20 Standard Test Method for Shear Properties of Sandwich Core Materials
F2891-15(2020)e1 Standard Specification for Commercial Bulk Milk Dispensers, Mechanically Refrigerated
F1604-15(2020)e1 Standard Specification for Freezers, Ice Cream, Soft Serve, Shake
F3261-20 Standard Specification for Resilient Flooring in Modular Format with Rigid Polymeric Core
F3427-20 Standard Practice for Documenting Environmental Conditions for Utilization with Exoskeleton Test Methods
D4576-16(2021) Standard Test Method for Mold Growth Resistance of Wet Blue and Wet White
D2209-00(2021) Standard Test Method for Tensile Strength of Leather
D6012-03(2021) Standard Test Method for Determination of Resistance of Leather to (Bleeding) Color Stain Transfer
D2212-00(2021) Standard Test Method for Slit Tear Resistance of Leather
D2211-00(2021) Standard Test Method for Elongation of Leather
D6183-00(2021) Standard Test Method for Tackiness of Finish on Leather
F1061-08(2020) Standard Specification for Ski Binding Test Devices
D2813-03(2021) Standard Practice for Sampling Leather for Physical and Chemical Tests
D2347-00(2021) Standard Test Method for Measuring Area of Leather Test Specimens
D8218-20 Standard Guide for Intrusion Detection System (IDS)
D8217-20 Standard Guide for Access Control System
D8205-20 Standard Guide for Video Surveillance System
F2232-14(2020) Standard Test Method for Determining the Longitudinal Load Required to Detach High Heels from Footwear
D7913/D7913M-14(2020) Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing
D4921-20 Standard Test Method for Foaming Tendencies of Engine Coolants at Room Temperature
D7584-16(2021) Standard Test Method for Evaluating the Resistance of the Surface of Wet Blue and Wet White to the Growth of Fungi in an Environmental Chamber
C1274-12(2020) Standard Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
D7674-14a(2021) Standard Test Method for Hexane/Petroleum Ether Extract in Wet Blue and Wet White
F918-15(2020)e1 Standard Specification for Noncarbonated Mechanically Refrigerated Beverage Dispenser (Visible Product)
F2339-19a Standard Practice for Design and Manufacture of Reciprocating Spark Ignition Engines for Light Sport Aircraft
D5229/D5229M-20 Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials
D4653-87(2020) Standard Test Method for Total Chlorides in Leather
D4907-10(2020) Standard Test Method for Nitrocellulose in Finish on Leather
D4654-87(2020) Standard Test Method for Sulfate Basicity in Leather
E2827/E2827M-20 Standard Test Method for Evaluating Response Robot Mobility Using Crossing Pitch/Roll Ramp Terrains
E2826/E2826M-20 Standard Test Method for Evaluating Response Robot Mobility Using Continuous Pitch/Roll Ramp Terrains
F3414-20 Standard Test Method for Determining Ortho-Phthalate Concentration in Flooring Containing Polyvinyl Chloride
E2828/E2828M-20 Standard Test Method for Evaluating Response Robot Mobility Using Symmetric Stepfields Terrains
D5354-95(2020) Standard Test Method for Determination of Total Active Ingredients in Sulfonated and Sulfated Oils
E3062/E3062M-20 Standard Specification for Indoor Ballistic Test Ranges for Small Arms and Fragmentation Testing of Ballistic-resistant Items
E3068-20 Standard Test Method for Contact Measurement of Backface Deformation in Clay Backing During Body Armor Testing
E1216-21 Standard Practice for Sampling for Particulate Contamination by Tape Lift
D3913-03(2020)e1 Standard Test Method for Acidity in Basic Chromium Tanning Liquors
D6017-97(2020)e1 Standard Test Method for Determination of Magnesium Sulfate (Epsom Salt) in Leather
D5266-13(2020) Standard Practice for Estimating the Percentage of Wood Failure in Adhesive Bonded Joints
E3086-20 Standard Practice for Creating Appliques for Use in Testing of Nonplanar Soft Body Armor Designed for Females
D8342/D8342M-21 Standard Test Method for Measuring the Probability of a Full Length Burn on a Cannabis/Hemp Pre-roll
D6658-08(2020) Standard Test Method for Volatile Matter (Moisture) of Wet Blue by Oven Drying
D7476-08(2020) Standard Test Method for Brine Saturation Value of Cured (Salt-Preserved) Hides and Skins
D6716-08(2020) Standard Test Method for Total Ash in Wet Blue or Wet White
D6715-13(2020) Standard Practice for Sampling and Preparation of Fresh or Salt-Preserved (Cured) Hides and Skins for Chemical and Physical Tests
F307-13(2020) Standard Practice for Sampling Pressurized Gas for Gas Analysis
F3234/F3234M-21 Standard Specification for Exterior Lighting in Small Aircraft
E3112/E3112M-20 Standard Test Method for Ballistic-resistant Products and Shoot Packs
F24-20 Standard Test Method for Measuring and Counting Particulate Contamination on Surfaces
D1901-10(2020) Standard Test Method for Relative Evaporation Time of Halogenated Organic Solvents and Their Admixtures
D2111-10(2020) Standard Test Methods for Specific Gravity and Density of Halogenated Organic Solvents and Their Admixtures
D2988-96(2020) Standard Test Methods for Water-Soluble Halide Ion in Halogenated Organic Solvents and Their Admixtures
D3698-04(2020) Standard Practice for Solvent Vapor Degreasing Operations
D8400-21 Standard Guide for Assessing Spoilage of Hemp Seed Intended for Human Consumption
D3448-10(2020) Standard Test Method for Specific Aqueous Conductance of Trichlorotrifluoroethane
F3011-21 Standard Specification for Performance of Angle of Attack System
F3228-21 Standard Specification for Flight Data and Voice Recording in Small Aircraft
D4755-95(2020) Standard Test Method for Free Halogens in Halogenated Organic Solvents and Their Admixtures
D3741-00(2020) Standard Test Methods for Appearance of Admixtures Containing Halogenated Organic Solvents
D4995-10(2020) Standard Specification for Electronic and Degreasing Grades of 1,1,2–Trichloro 1,2,2,–Trifluoroethane Solvent
F3512-21 Standard Test Method for Evaluating Wind Safety and Durability of Market Umbrellas
C484-20 Standard Test Method for Thermal Shock Resistance of Glazed Ceramic Tile
F1951-21 Standard Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment
D6361/D6361M-98(2020) Standard Guide for Selecting Cleaning Agents and Processes
D5248-04(2020) Standard Specification for Reclaimed 1,1,2-Trichloro 1,2,2-Trifluoroethane
C648-20 Standard Test Method for Breaking Strength of Ceramic Tile
F851-87(2020) Standard Test Method for Self-Rising Seat Mechanisms
D7518-20 Standard Specification for 1,3 Propanediol (PDO) Base Engine Coolant for Automobile and Light-Duty Service
F3063/F3063M-21 Standard Specification for Aircraft Fuel Storage and Delivery
E3192/E3192M-20 Standard Practice for Soft Armor Conditioning by Tumbling
F859-21 Standard Specification for Heat-Sanitizing Commercial Dishwashing Machines, Multiple Tank, Conveyor Rack Type
F2107-08(2020) Standard Guide for Construction and Maintenance of Skinned Areas on Baseball and Softball Fields
F331-13(2020) Standard Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (Using Flash Evaporator)
F311-08(2020) Standard Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters
F310-07(2020) Standard Practice for Sampling Cryogenic Aerospace Fluids
F2225-15(2020) Standard Safety Specification for Consumer Trampoline Enclosures
F2933-21a Standard Consumer Safety Specification for Crib Mattresses
C767-20 Standard Test Method for Thermal Conductivity of Carbon Refractories
D3529-16(2021) Standard Test Methods for Constituent Content of Composite Prepreg
F2530-13(2020) Standard Specification for Protective Headgear with Faceguard Used in Bull Riding
E1234-12(2020) Standard Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft
F2553-16(2020) Standard Specification for Warnings on Refillable CO
F51/F51M-20 Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
F2653-16(2020) Standard Specification for Paintball Valve Male Threaded Connection for Use with Approved Cylinders
F1750-16(2020) Standard Specification for Paintball Marker Threaded-Propellant Source Interface
D7817-12(2021) Standard Test Method for Enumeration of Yeast and Mold in Raceway Brine, Brine-Cured Hides and Skins
D7819-12(2021) Standard Test Method for Enumeration of Yeast and Mold on Fresh (Uncured) Hides and Skins
F1165-20 Standard Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts
D2339-20 Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading
E2042/E2042M-09(2021) Standard Practice for Cleaning and Maintaining Controlled Areas and Clean Rooms
E1997-15(2021) Standard Practice for the Selection of Spacecraft Materials
F2469-20 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method
E2088-06(2021) Standard Practice for Selecting, Preparing, Exposing, and Analyzing Witness Surfaces for Measuring Particle Deposition in Cleanrooms and Associated Controlled Environments
F302-09(2021) Standard Practice for Field Sampling of Aerospace Fluids in Containers
E2090-12(2020) Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy
F2727-09(2020) Standard Guide for Manufacturers for Labeling Headgear Products
C482-20 Standard Test Method for Bond Strength of Ceramic Tile to Portland Cement Paste
F2774-09(2020) Standard Practice for Manufacturing Quality Control of Consumer Trampoline Bed Material
F1749-15(2020) Standard Specification for Fitness Equipment and Fitness Facility Safety Signage and Labels
F2856-12(2020) Standard Practice for Transfilling and Safe Handling of Small CO
D906-20 Standard Test Method for Strength Properties of Adhesives in Plywood Type Construction in Shear by Tension Loading
D6019-20 Test Method for Determination of Chromic Oxide in Basic Chromium Tanning Liquors (Ammonium Persulfate Oxidation)
F2842-20 Standard Specification for Reins Used in Thoroughbred and Quarter Horse Racing
F510/F510M-20 Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method
F2169-15(2020) Standard Specification for Resilient Stair Treads
F2873-20 Standard Practice for the Installation of Self-Leveling Underlayment and the Preparation of Surface to Receive Resilient Flooring
D8220-20 Standard Guide for Conducting Recall/Removal Procedures for Products in the Cannabis Industry
D3860-98(2020) Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique
D5029-98(2020) Standard Test Method for Water Solubles in Activated Carbon
E1235-12(2020)e1 Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft
D3103-20 Standard Test Method for Thermal Insulation Performance of Distribution Packages
F3255-19 Standard Specification for Rapid Pull Down Refrigerators (Blast Chillers), Freezers (Blast Freezers), Combination Refrigerator/Freezer (Blast Chiller/Freezers), and Quick Chillers for Commercial Use
D5931-20 Standard Test Method for Density and Relative Density of Engine Coolant Concentrates and Aqueous Engine Coolants by Digital Density Meter
F3062/F3062M-20 Standard Specification for Aircraft Powerplant Installation
F3444/F3444M-20 Standard Practice for Training Exoskeleton Users
F1858-98(2020) Standard Performance Requirements for Multipositional Plastic Chairs with Adjustable Backs or Reclining Mechanisms for Outdoor Use
F3351-19e1 Standard Test Method for Playground Surface Impact Testing in Laboratory at Specified Test Height
F1988-99(2020) Standard Performance Requirements for Plastic Chaise Lounges, With or Without Moving Arms, With Adjustable Backs, for Outdoor Use
F3008-13(2020) Standard Specification for Cork Floor Tile
F1989-05(2020) Standard Specification for Cooking Fire Suppression Blankets
F2766-11(2020) Standard Test Method for Boat Barriers
D2096-11(2019)e1 Standard Test Method for Colorfastness and Transfer of Color in the Washing of Leather
D4069-95(2020) Standard Specification for Impregnated Activated Carbon Used to Remove Gaseous Radio-Iodines from Gas Streams
F2054/F2054M-13(2020) Standard Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization Within Restraining Plates
E171/E171M-11(2020) Standard Practice for Conditioning and Testing Flexible Barrier Packaging
F2678-16(2021) Standard Practice for Preparing Panel Underlayments, Thick Poured Gypsum Concrete Underlayments, Thick Poured Lightweight Cellular Concrete Underlayments, and Concrete Subfloors with Underlayment Patching Compounds to Receive Resilient Flooring
F2824-10(2020) Standard Test Method for Mechanical Seal Strength Testing for Round Cups and Bowl Containers with Flexible Peelable Lids
F2981-15(2020) Standard Test Method for Verifying Nonporous Flexible Barrier Material Resistance to the Passage of Air
F925-13(2020) Standard Test Method for Resistance to Chemicals of Resilient Flooring
F2398-11(2020) Standard Test Method for Measuring Moment of Inertia and Center of Percussion of a Baseball or Softball Bat
F1140/F1140M-13(2020)e1 Standard Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages
F472-11(2021) Standard Terminology for Geometry of Alpine Skis
F511-17(2021) Standard Test Method for Quality of Cut (Joint Tightness) of Resilient Floor Tile
F2055-17(2021) Standard Test Method for Size and Squareness of Resilient Floor Tile by Dial Gauge Method
F2419-11(2021) Standard Practice for Installation of Thick Poured Gypsum Concrete Underlayments and Preparation of the Surface to Receive Resilient Flooring
C874-20 Standard Test Method for Rotary Slag Testing of Refractory Materials
D3121-17 Standard Test Method for Tack of Pressure-Sensitive Adhesives by Rolling Ball
F697-16 Standard Practice for Care and Use of Athletic Mouth Protectors
F2336-17 Standard Guide for Roller Hockey Playing Facilities
F839-15 Standard Specification for Cautionary Labeling of Portable Gasoline, Kerosene, and Diesel Containers for Consumer Use
F1784-97(2020) Standard Test Method for Performance of a Pasta Cooker
F1785-97(2020) Standard Test Method for Performance of Steam Kettles
F2202-02(2020) Standard Specification for Slow Cook/Hold Ovens and Hot Food Holding Cabinets
F1787-98(2020) Standard Test Method for Performance of Rotisserie Ovens
F1275-14(2020) Standard Test Method for Performance of Griddles
F2237-03(2020) Standard Test Method for Performance of Upright Overfired Broilers
F2875-10(2020) Standard Guide for Laboratory Requirements Necessary to Test Commercial Cooking and Warming Appliances to ASTM Test Methods
F140-98(2020) Standard Practice for Making Reference Glass-Metal Butt Seals and Testing for Expansion Characteristics by Polarimetric Methods
F218-13(2020) Standard Test Method for Measuring Optical Retardation and Analyzing Stress in Glass
C147-86(2020) Standard Test Methods for Internal Pressure Strength of Glass Containers
C724-91(2020) Standard Test Method for Acid Resistance of Ceramic Decorations on Architectural-Type Glass
C824-91(2020) Standard Practice for Specimen Preparation for Determination of Linear Thermal Expansion of Vitreous Glass Enamels and Glass Enamel Frits by Dilatometer Method
C149-14(2020) Standard Test Method for Thermal Shock Resistance of Glass Containers
C770-16(2020) Standard Test Method for Measurement of Glass Stress—Optical Coefficient
C1419-14(2020) Standard Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young's Modulus
C1426-14(2020) Standard Practices for Verification and Calibration of Polarimeters
C336-71(2020) Standard Test Method for Annealing Point and Strain Point of Glass by Fiber Elongation
C885-87(2020) Standard Test Method for Young’s Modulus of Refractory Shapes by Sonic Resonance
D3716-14(2020) Standard Test Methods for Use of Emulsion Polymers in Floor Polishes
C224-78(2020) Standard Practice for Sampling Glass Containers
D6625-13(2020) Standard Practice for Conducting a Test of Protective Properties of Polish Applied to a Painted Panel Using Fluorescent UV-Condensation Light- and Water-Exposure Apparatus
D4095-97(2020) Standard Practice for Use of the Refractometer for Determining Nonvolatile Matter (Total Solids) in Floor Polishes
D5330/D5330M-06(2020) Standard Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced
D6123/D6123M-97(2020) Standard Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking
C1548-02(2020) Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio of Refractory Materials by Impulse Excitation of Vibration
D6573/D6573M-13(2020) Standard Specification for General Purpose Wirebound Shipping Boxes
D6881/D6881M-03(2020) Standard Classification for Standard Plastics Industry Bulk Box/Pallet Unit Size Classified By Bulk Density
C975-87(2020) Standard Practice for Preparing Test Specimens from Basic Refractory Ramming Products by Pressing
D3813/D3813M-98(2020) Standard Test Method for Curling, Twisting, and Tubing on Unwind of Pressure-Sensitive Tapes
D3889/D3889M-96(2020) Standard Test Method for Adherence to Linerboard of Pressure-Sensitive Tape at Low Temperature
C862-16(2020) Standard Practice for Preparing Refractory Concrete Specimens by Casting
C903-15(2020) Standard Practice for Preparing Refractory Specimens by Cold Gunning
D3816/D3816M-96(2020) Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes
E2915-13(2020) Standard Guide for Emergency Operations Center (EOC) Management
E2950-14(2020) Standard Specification for Metal Canopy Systems
D3652/D3652M-01(2020) Standard Test Method for Thickness of Pressure-Sensitive Tapes
D5750/D5750M-95(2020) Standard Guide for Width and Length of Pressure-Sensitive Tape
D5486/D5486M-06(2020) Standard Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing
D5728-12(2020) Standard Practices for Securement of Cargo in Intermodal and Unimodal Surface Transport
D6463/D6463M-06(2020) Standard Test Method for Time to Failure of Pressure Sensitive Articles Under Sustained Shear Loading
E2951-13(2020)e1 Standard Guide for Community Emergency Preparedness for Persons with Disabilities
C973-87(2020) Standard Practice for Preparing Test Specimens from Basic Refractory Gunning Products by Pressing
D6205-20 Standard Practice for Calibration of the James Static Coefficient of Friction Machine
C974-87(2020) Standard Practice for Preparing Test Specimens from Basic Refractory Castable Products by Casting
D7387-20 Standard Test Method for Vibration Testing of Intermediate Bulk Containers (IBCs) Used for Shipping Liquid Hazardous Materials (Dangerous Goods)
C1378-20 Standard Test Method for Determination of Resistance to Staining
D7660-20 Standard Guide for Conducting Internal Pressure Tests on United Nations (UN) Packagings
C650-20 Standard Test Method for Determination of Resistance to Chemical Substances
D7887-20 Standard Guide for Selection of Substitute, Non-hazardous, Liquid Filling Substances for Packagings Subjected to the United Nations Performance Tests
F3339-20 Standard Guide for Construction or Renovation of Native-soil Athletic Fields
D3751/D3751M-10(2017) Standard Practice for Evaluation of Furniture Polish
F2643-20 Standard Specification for Powered Pot, Pan and Utensil Washing Sinks
D5458-95(2020) Standard Test Method for Peel Cling of Stretch Wrap Film
E398-20 Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement
C408-88(2020) Standard Test Method for Thermal Conductivity of Whiteware Ceramics
D5459-95(2020) Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film
D5663-15(2020) Standard Guide for Validating Recycled Content in Packaging Paper and Paperboard
C556-16(2020) Standard Test Method for Resistance of Overglaze Decorations to Attack by Detergents
C368-88(2020) Standard Test Method for Impact Resistance of Ceramic Tableware
C370-12(2020) Standard Test Method for Moisture Expansion of Fired Whiteware Products
C329-88(2020) Standard Test Method for Specific Gravity of Fired Ceramic Whiteware Materials
C372-94(2020) Standard Test Method for Linear Thermal Expansion of Porcelain Enamel and Glaze Frits and Fired Ceramic Whiteware Products by Dilatometer Method
C424-93(2020) Standard Test Method for Crazing Resistance of Fired Glazed Whitewares by Autoclave Treatment
F3004-13(2020) Standard Test Method for Evaluation of Seal Quality and Integrity Using Airborne Ultrasound
C554-93(2020) Standard Test Method for Crazing Resistance of Fired Glazed Ceramic Whitewares by a Thermal Shock Method
F3450-20 Standard Guide for Flight Hazard and Surveillance Systems Personnel Certification
F2338-09(2020) Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method
D2876-00(2020) Standard Test Method for Water-Soluble Matter of Vegetable-Tanned Leather
E296-70(2020) Standard Practice for Ionization Gage Application to Space Simulators
E341-08(2020) Standard Practice for Measuring Plasma Arc Gas Enthalpy by Energy Balance
D2213-00(2020) Standard Test Method for Compressibility of Leather
C1895-20 Standard Test Method for Determination of Mohs Scratch Hardness
E285-08(2020) Standard Test Method for Oxyacetylene Ablation Testing of Thermal Insulation Materials
F2795-18 Standard Test Method for Performance of Self-Contained Soft Serve and Shake Freezers
F2951-19 Standard Consumer Safety Specification for Baby Monitors
D2875-00(2020) Standard Test Method for Insoluble Ash of Vegetable-Tanned Leather
E511-07(2020) Standard Test Method for Measuring Heat Flux Using a Copper-Constantan Circular Foil, Heat-Flux Transducer
F3317-20 Standard Consumer Safety Specification for Infant Floor Seats
E457-08(2020) Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
F2199-20 Standard Test Method for Determining Dimensional Stability and Curling Properties of Resilient Flooring after Exposure to Heat
E3108-18 Standard Practice for Conformity Assessment of Protective Gloves Worn by Law Enforcement and Corrections Officers
E512-94(2020) Standard Practice for Combined, Simulated Space Environment Testing of Thermal Control Materials with Electromagnetic and Particulate Radiation
D7935-20 Standard Test Method for Corrosion Test for Non-Aqueous Engine Coolants in Glassware
F919-20 Standard Specification for Slicing Machines, Food, Electric
D6403-99(2020) Standard Test Method for Determining Moisture in Raw and Spent Materials
E377-08(2020) Standard Practice for Internal Temperature Measurements in Low-Conductivity Materials
E491-73(2020) Standard Practice for Solar Simulation for Thermal Balance Testing of Spacecraft
E458-08(2020) Standard Test Method for Heat of Ablation
E434-10(2020) Standard Test Method for Calorimetric Determination of Hemispherical Emittance and the Ratio of Solar Absorptance to Hemispherical Emittance Using Solar Simulation
E2089-15(2020) Standard Practices for Ground Laboratory Atomic Oxygen Interaction Evaluation of Materials for Space Applications
D4904-99(2020) Standard Practice for Cooling of Analytical Solutions
C1300-95(2020) Standard Test Method for Linear Thermal Expansion of Glaze Frits and Ceramic Whiteware Materials by Interferometric Method
D6020-00(2020) Standard Practice for Calculation of (Non-Mineral) Combined Tanning Agents and Degree of Tannage
D6402-99(2020) Standard Test Method for Determining Soluble Solids and Insolubles in Extracts of Vegetable Tanning Materials
D6075-13(2020) Standard Test Method for Cracking Resistance of Leather
C849-88(2020) Standard Test Method for Knoop Indentation Hardness of Ceramic Whitewares
D4901-99(2020) Standard Practice for Preparation of Solution of Liquid Vegetable Tannin Extracts
F1105-09(2020) Standard Practice for Preparing Aircraft Cleaning Compounds, Liquid-Type, Temperature-Sensitive, or Solvent-Based, for Storage Stability Testing
D6401-99(2020) Standard Test Method for Determining Non-Tannins and Tannin in Extracts of Vegetable Tanning Materials
D4831-00(2020) Standard Test Method for Buckle Tear Strength of Leather
C1545-02(2020) Standard Practice for Dispersing Pigments and Other Materials Into Water-Based Suspensions With High Intensity Mixer
C1466-00(2020) Standard Test Method for Graphite Furnace Atomic Absorption Spectrometric Determination of Lead and Cadmium Extracted From Ceramic Foodware
D6404-99(2020) Standard Practice for Sampling Vegetable Materials Containing Tannin
D4903-99(2020) Standard Test Method for Total Solids and Water in Vegetable Tanning Material Extracts
E598-08(2020) Standard Test Method for Measuring Extreme Heat-Transfer Rates from High-Energy Environments Using a Transient, Null-Point Calorimeter
F482-09(2020) Standard Practice for Corrosion of Aircraft Metals by Total Immersion in Maintenance Chemicals
D5548-13(2020) Standard Guide for Evaluating Color Transfer or Color Loss of Dyed Fabrics in Laundering (Not Suitable for Detergent or Washing Machine Rankings)
D4905-99(2020) Standard Practice for Preparation of Solution of Solid, Pasty and Powdered Vegetable Tannin Extracts
C848-88(2020) Standard Test Method for Young’s Modulus, Shear Modulus, and Poisson’s Ratio For Ceramic Whitewares by Resonance
C773-88(2020) Standard Test Method for Compressive (Crushing) Strength of Fired Whiteware Materials
D4786-00(2020) Standard Test Method for Stitch Tear Strength, Single Hole
D4900-99(2020) Standard Test Method for Lignosulfonates (Sulfite Cellulose) in Tanning Extracts
D6407-99(2020) Standard Test Method for Analysis of Iron and Copper in Vegetable Tanning Materials
D2442-75(2020) Standard Specification for Alumina Ceramics for Electrical and Electronic Applications
C1510-01(2020) Standard Test Method for Color and Color Difference of Whitewares by Abriged Spectrophotometry
D6405-99(2020) Standard Practice for Extraction of Tannins from Raw and Spent Materials
D6406-99(2020) Standard Test Method for Analysis of Sugar in Vegetable Tanning Materials
D4902-99(2020) Standard Test Method for Evaporation and Drying of Analytical Solutions
F1110-09(2020) Standard Test Method for Sandwich Corrosion Test
D5416-95(2020) Standard Test Method for Evaluating Abrasion Resistance of Stretch Wrap Films by Vibration Testing
D116-86(2020) Standard Test Methods for Vitrified Ceramic Materials for Electrical Applications
D6410-99(2020) Standard Test Method for Determining Acidity of Vegetable Tanning Liquors
D4899-99(2020) Standard Practice for Analysis of Vegetable Tanning Materials—General
C1607-12(2020) Standard Test Method for Determination of “Microwave Safe for Reheating” for Ceramicware
C738-94(2020) Standard Test Method for Lead and Cadmium Extracted from Glazed Ceramic Surfaces
F2519-05(2020) Standard Test Method for Grease Particle Capture Efficiency of Commercial Kitchen Filters and Extractors
C949-80(2020) Standard Test Method for Porosity in Vitreous Whitewares by Dye Penetration
D1780-05(2020) Standard Practice for Conducting Creep Tests of Metal-to-Metal Adhesives
D6409-99(2020) Standard Practice for Color Tests with Sheepskin Skiver
D5415-95(2020) Standard Test Method for Evaluating Load Containment Performance of Stretch Wrap Films by Vibration Testing
D6408-99(2020) Standard Test Method for Analysis of Tannery Liquors
D5414-95(2020) Standard Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films
D2918-99(2020) Standard Test Method for Durability Assessment of Adhesive Joints Stressed in Peel
C499-20 Standard Test Method for Facial Dimensions and Thickness of Flat, Rectangular Ceramic Wall and Floor Tile
F2050-19 Standard Consumer Safety Specification for Hand-Held Infant Carriers
F3479-20 Standard Specification for Failure Tolerance for Occupant Safety of Suborbital Vehicles
D5687/D5687M-20 Standard Guide for Preparation of Flat Composite Panels with Processing Guidelines for Specimen Preparation
F1695-20 Standard Test Method for Performance of Underfired Broilers
D6254/D6254M-20 Standard Specification for Wirebound Pallet-Type Wood Boxes
F1566-14(2021) Standard Test Methods for Evaluation of Innersprings, Boxsprings, Mattresses or Mattress Sets
F2520-20 Standard Specification for Reach-in Refrigerators, Freezers, Combination Refrigerator/Freezers, and Thaw Cabinets
F3132-20 Standard Practice for Selection of Walkway Surfaces When Considering Pedestrian Safety
F2950-14(2021) Standard Safety and Performance Specification for Soccer Goals
D8334/D8334M-20 Standard Practice for Sampling of Cannabis/Hemp Post-Harvest Batches for Laboratory Analyses
F2456-20 Standard Specification for Youth-Resistant Firearms Containers (YRFCs)
F2490-20 Standard Guide for Aircraft Electrical Load and Power Source Capacity Analysis
F2622-20 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using Various Sensors
D7799-12a(2021) Standard Specification for Tufted and Woven Broadloom Carpet Adhesives Without Homogenous PVC or Non-PVC Backings
C393/C393M-20 Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
E2855-12(2021) Standard Test Method for Evaluating Emergency Response Robot Capabilities: Radio Communication: Non-Line-of-Sight Range
F2810-15(2020) Standard Specification for Elliptical Trainers
D5215-93(2021) Standard Test Method for Instrumental Evaluation of Staining of Vinyl Flooring by Adhesives
F2811-15(2020) Standard Test Methods for Evaluating Design and Performance Characteristics of Elliptical Trainers
F2844-20 Standard Test Method for Displacement Compression of Softball and Baseball Bat Barrels
F2571-15(2020) Standard Test Methods for Evaluating Design and Performance Characteristics of Fitness Equipment
F2058-07(2021) Standard Specification for Candle Fire Safety Labeling
F2326-04(2021) Standard Test Method for Collection and Analysis of Visible Emissions from Candles as They Burn
C583-15(2021) Standard Test Method for Modulus of Rupture of Refractory Materials at Elevated Temperatures
D7509-09(2021) Standard Specification for Fluorocarbon Feedstock Grade Chloroform
F1722-15(2021) Standard Test Method for Determining Mass and Moment of Inertia of Alpine Skis
D3078-02(2021)e1 Standard Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission
F1107-04(2021) Standard Terminology Relating to Snowboarding
C1270-97(2021) Standard Practice for Detection Sensitivity Mapping of In-Plant Walk-Through
C1238-97(2021) Standard Guide for Installation of Walk-Through Metal Detectors
C730-98(2021) Standard Test Method for Knoop Indentation Hardness of Glass
F2714-08(2021) Standard Test Method for Oxygen Headspace Analysis of Packages Using Fluorescent Decay
F2095-07(2021) Standard Test Methods for Pressure Decay Leak Test for Flexible Packages With and Without Restraining Plates
F2228-13(2021) Standard Test Method for Non-Destructive Detection of Leaks in Packaging Which Incorporates Porous Barrier Material by CO
F2227-13(2021) Standard Test Method for Non-Destructive Detection of Leaks in Non-sealed and Empty Packaging Trays by CO
D5574-94(2021) Standard Test Methods for Establishing Allowable Mechanical Properties of Wood-Bonding Adhesives for Design of Structural Joints
D3642-13(2021) Standard Test Method for Softening Point of Certain Alkali-Soluble Resins
D3430-95(2021) Standard Test Method for Clarity and Yellowness of Liquid Water-Based Clear Floor Polishes
D1986-14(2021) Standard Test Method for Determining the Apparent Viscosity of Polyethylene Wax
D3836-13(2021) Standard Practice for Evaluation of Automotive Polish
D4078-02(2021) Standard Specification for Water Emulsion Floor Polish
D7078/D7078M-20e1 Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
D5379/D5379M-19e1 Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method
D4955-89(2021) Standard Practice for Field Evaluation of Automotive Polish
D3410/D3410M-16e1 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
D1290-95(2021) Standard Test Method for Sediment in Water-Emulsion Polishes by Centrifuge
D6416/D6416M-16e1 Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load
D1337-10(2021) Standard Practice for Storage Life of Adhesives by Viscosity and Bond Strength
D1084-16(2021) Standard Test Methods for Viscosity of Adhesives
D1338-99(2021) Standard Practice for Working Life of Liquid or Paste Adhesives by Consistency and Bond Strength
C1901-21e2 Standard Test Method for Measuring Optical Retardation in Flat Architectural Glass
D4783-01(2021) Standard Test Methods for Resistance of Adhesive Preparations in Container to Attack by Bacteria, Yeast, and Fungi
D7149-05(2021) Standard Practice for Determining the Freeze Thaw Stability of Adhesives
D4426-01(2021) Standard Test Method for Determination of Percent Nonvolatile Content of Liquid Phenolic Resins Used for Wood Laminating
D1489-09(2021) Standard Test Method for Nonvolatile Content of Aqueous Adhesives
D5113-97(2021) Standard Test Method for Determining Adhesive Attack on Rigid Cellular Foam
D7532-09(2021) Standard Practice for Determination of Re-tack Ability of Carpet Adhesives
D1144-99(2021) Standard Practice for Determining Strength Development of Adhesive Bonds
D6862-11(2021) Standard Test Method for 90 Degree Peel Resistance of Adhesives
D4338-97(2021) Standard Test Method for Flexibility Determination of Supported Adhesive Films by Mandrel Bend
D3535-07a(2021) Standard Test Method for Resistance to Creep Under Static Loading for Structural Wood Laminating Adhesives Used Under Exterior Exposure Conditions
D5040-90(2021) Standard Test Methods for Ash Content of Adhesives
D905-08(2021) Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
F395-19 Standard Terminology Relating to Vacuum Cleaners
D1828-01(2021) Standard Practice for Atmospheric Exposure of Adhesive-Bonded Joints and Structures
D3808-01(2021) Standard Test Method for Qualitative Determination of Adhesion of Adhesives to Substrates by Spot Adhesion
D4688/D4688M-14(2021)e1 Standard Test Method for Evaluating Structural Adhesives for Finger Jointing Lumber
D904-99(2021) Standard Practice for Exposure of Adhesive Specimens to Artificial Light
F486-01(2018) Standard Practice for Preparation of Use and Care Booklets for Vacuum Cleaners
F2029-16(2021) Standard Practices for Making Laboratory Heat Seals for Determination of Heat Sealability of Flexible Barrier Materials as Measured by Seal Strength
F1411-11(2018) Standard Practice for Presenting Selected Information on Vacuum Cleaners for Consumer Use
F450-13(2019) Standard Test Methods for Vacuum Cleaner Hose—Durability and Reliability (Plastic)
F2609-11(2021) Standard Test Method for Litter-Cleaning Effectiveness of Vacuum Cleaners
F2797-19 Standard Test Method for Evaluating Edge Cleaning Effectiveness of Vacuum Cleaners
F2373-11(2017) Standard Consumer Safety Performance Specification for Public Use Play Equipment for Children 6 Months through 23 Months
F2158-08(2016) Standard Specification for Residential Central-Vacuum Tube and Fittings
F2544-11(2018) Standard Test Method for Determining A-Weighted Sound Power Level of Central Vacuum Power Units
F2828-20 Standard Test Method for Assessing Carpet Cleaning Effectiveness in Terms of Visual Appearance Change When Cleaned with a Wet Extraction Cleaning System
F2826-14(2018) Standard Test Method for Evaluating the Sustained Air Performance and Exhaust Emission Efficiencies of Central Vacuum Cleaning Units
F3528-21 Standard Test Method for Exoskeleton Use: Gait
F1344-21a Standard Specification for Rubber Floor Tile
F1859-21a Standard Specification for Rubber Sheet Floor Covering Without Backing
F3463-21 Standard Guide for Ensuring the Safety of Connected Consumer Products
F1427-21e1 Standard Consumer Safety Specification for Bunk Beds
D3306-21 Standard Specification for Glycol Base Engine Coolant for Automobile and Light-Duty Service
D3634-21 Standard Test Method for Trace Chloride Ion in Engine Coolants
F1233-21 Standard Test Method for Security Glazing Materials And Systems
F3389/F3389M-21 Standard Test Method for Assessing the Safety of Small Unmanned Aircraft Impacts
F3408/F3408M-21 Standard Specification for Aircraft Emergency Parachute Recovery Systems
D880-92(2021) Standard Test Method for Impact Testing for Shipping Containers and Systems
C1652/C1652M-21 Standard Test Method for Measuring Optical Distortion in Flat Glass Products Using Digital Photography of Grids
D2221-01(2021) Standard Test Method for Creep Properties of Package Cushioning Materials
D4168-95(2021) Standard Test Methods for Transmitted Shock Characteristics of Foam-in-Place Cushioning Materials
D6537-00(2021) Standard Practice for Instrumented Package Shock Testing For Determination of Package Performance
D5077-90(2021) Standard Terminology Relating to Electrostatic Discharge (ESD) Packaging Materials
D6653/D6653M-13(2021) Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method
F3038-21 Standard Test Method for Timed Evaluation of Forced-Entry-Resistant Systems
F2559/F2559M-21 Standard Guide for Writing a Specification for Sterilizable Peel Pouches
F3236-21a Standard Specification for High Intensity Radiated Field (HIRF) Protection in Small Aircraft
C1376-21a Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass
F1608-21 Standard Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method)
F3057-21 Standard Test Method for Electromagnetic Shielding Effectiveness of Glazings
F3114-21 Standard Specification for Structures
F3093/F3093M-21 Standard Specification for Aeroelasticity Requirements
C242-21 Standard Terminology of Ceramic Whitewares and Related Products
F3476-21 Standard Guide for Airframe and Systems Aviation Maintenance Personnel
D8337/D8337M-21 Standard Test Method for Evaluation of Bond Properties of FRP Composite Applied to Concrete Substrate using Single-Lap Shear Test
F3180/F3180M-21 Standard Specification for Low-Speed Flight Characteristics of Aircraft
F3077-21 Standard Specification for Eye Protectors for Women’s Lacrosse
F3174/F3174M-21 Standard Specification for Establishing Operating Limitations and Information for Aeroplanes
F2713-21 Standard Specification for Eye Protectors for Field Hockey
F3230-21a Standard Practice for Safety Assessment of Systems and Equipment in Small Aircraft
F3526-21 Standard Guide for Aircraft Instrument Systems Technician Certification
F3540-21 Standard Guide for Hazards for Consideration when Designing Exoskeletons
F3523-21 Standard Test Method for Exoskeleton Use: Confined Space: Horizontal Movement
D2809-21 Standard Test Method for Cavitation Corrosion and Erosion-Corrosion Characteristics of Aluminum Pumps With Engine Coolants
F22-21 Standard Test Method for Hydrophobic Surface Films by the Water-Break Test
F1278-96(2021)e1 Standard Guide for Use and Handling of Flexible Retort Food Pouches in the Processing Environment
C1464-21 Standard Specification for Bent Glass
F3269-21 Standard Practice for Methods to Safely Bound Behavior of Aircraft Systems Containing Complex Functions Using Run-Time Assurance
F1980-21 Standard Guide for Accelerated Aging of Sterile Barrier Systems and Medical Devices
D8417-21 Standard Guide for Sampling of Hempseed Intended for Human Consumption
E2852-13(2021) Standard Guide for Acquisition, Maintenance, Storage, and Use of Hazardous Material Detection Instrumentation
E2851/E2851M-13(2021) Standard Specification for Ruggedness Requirements for HAZMAT Instrumentation
F2941-21 Standard Practice for Air Soft Player Safety Briefing
D8409-21 Standard Guide for Conducting Stacking Tests on UN Packagings Using Guided or Unguided Loads
D5346-17(2021) Standard Test Method for Determination of the Pour Point of Petroleum Oil Used in Fatliquors and Softening Compounds
D5445-21 Standard Practice for Pictorial Markings for Handling of Goods
F2645-21 Standard Specification for Bun Slicing Machines
D8403-21 Standard Practice for Certificate Programs within the Cannabis and Hemp Industries
F2646-21 Standard Specification for Bread Slicing Machines
F2239-10(2021) Standard Test Method for Performance of Conveyor Broilers
F2472-05(2021) Standard Test Method for Performance of Staff-Serve Hot Deli Cases
F2379-04(2021) Standard Test Method for Energy Performance of Powered Open Warewashing Sinks
F3216-16(2021) Standard Test Method for Performance of Retherm Ovens
F3188-16(2021) Standard Specification for Extractable Hazardous Metals in Synthetic Turf Infill Materials
F1786-97(2021) Standard Test Method for Performance of Braising Pans
F1991-99(2021) Standard Test Method for Performance of Chinese (Wok) Ranges
D5351-93(2021) Standard Test Method for Determination of Organically Combined Sulfuric Anhydride by Extraction Titration, Test Method B
D5440-17(2021) Standard Test Method for Determining the Melting Point of Fats and Oils
D5554-15(2021) Standard Test Method for Determination of the Iodine Value of Fats and Oils
D8347-21a Standard Guide for Requirements for Analytical Laboratory Related Professions Within the Cannabis and Hemp Industries
D8346-21a Standard Guide for Requirements for Quality Related Professions Within the Cannabis and Hemp Industries
D8348-21a Standard Guide for Requirements for Transportation and Logistics Related Professions Within the Cannabis and Hemp Industries
F1015-21 Standard Test Method for Relative Abrasiveness of Synthetic Turf Playing Surfaces
F2940-21 Standard Practice for Air Soft Field Operation
D5355-95(2021) Standard Test Method for Specific Gravity of Oils and Liquid Fats
D2346-21 Standard Test Method for Apparent Density of Leather
D2210-21 Standard Test Method for Grain Crack and Extension of Leather by the Mullen Test
D2098-21 Standard Test Method for Dynamic Water Resistance of Shoe Upper Leather by the Dow Corning Leather Tester
D2941-21 Standard Test Method for Measuring Break Pattern of Leather (Break Scale)
F1860-21a Standard Specification for Rubber Sheet Floor Covering With Backing
D5528/D5528M-21 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
D6015-21 Standard Test Method for Static Water Absorption of Leather
F3520-21 Standard Guide for Training and Qualification of Safety-Critical Space Operations Personnel
F3323-21 Standard Terminology for Exoskeletons and Exosuits
F2388-21 Standard Consumer Safety Specification for Baby Changing Products for Domestic Use
F404-21 Standard Consumer Safety Specification for High Chairs
F852/F852M-22 Standard Specification for Portable Gasoline, Kerosene, and Diesel Containers for Consumer Use
D1151-00(2022) Standard Practice for Effect of Moisture and Temperature on Adhesive Bonds
F2608-15(2022) Standard Test Method for Determining the Change in Room Air Particulate Counts as a Result of the Vacuum Cleaning Process
F883-13(2022) Standard Performance Specification for Padlocks
D3564-22 Standard Practice for Application of Floor Polishes to Maintain Vinyl Composition Tile or Flooring
F2598-22 Standard Consumer Safety Specification for Sealed Storage Chests such as Cedar Chests, Hope Chests, Blanket Chests, Keepsake Chests
F3544-21 Standard Test Method for Hunting Saddle Static Load Capacity
F521-22 Standard Test Methods for Bond Integrity of Transparent Laminates
F3012-22 Standard Specification for Loose-Fill Rubber for Use as a Playground Safety Surface under and around Playground Equipment
E3211-22 Standard Practice for Selection, Integration, and Verification of Active Vehicle Barrier Safety Devices
F3543-22 Standard Terminology Relating to Hunting Saddles
D2825-21e1 Standard Terminology Relating to Polishes and Related Materials
C135-96(2022) Standard Test Method for True Specific Gravity of Refractory Materials by Water Immersion
C1171-16(2022) Standard Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories
C1292-22 Standard Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
C1469-22 Standard Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature
C1730-17(2022) Standard Test Method for Particle Size Distribution of Advanced Ceramics by X-Ray Monitoring of Gravity Sedimentation
D7290-06(2022) Standard Practice for Evaluating Material Property Characteristic Values for Polymeric Composites for Civil Engineering Structural Applications
D8441/D8441M-22 Standard Specification for International Symbol for Identifying Consumer Products Containing Intoxicating Cannabinoids
C199-22 Standard Test Method for Pier Test for Refractory Mortars
C20-00(2022) Standard Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water
C325-07(2022) Standard Guide for Wet Sieve Analysis of Ceramic Whiteware Clays
C675-91(2022) Standard Test Method for Alkali Resistance of Ceramic Decorations on Returnable Beverage Glass Containers
F420-04(2022) Standard Test Method for Access Depth Under Furniture of Vacuum Cleaners
C729-11(2022) Standard Test Method for Density of Glass by the Sink-Float Comparator
C829-81(2022) Standard Practices for Measurement of Liquidus Temperature of Glass by the Gradient Furnace Method
C866-11(2022) Standard Test Method for Filtration Rate of Ceramic Whiteware Clays
C1505-15(2022) Standard Test Method for Determination of Breaking Strength and Modulus of Rupture of Ceramic Tiles and Glass Tiles by Three-Point Loading
D6671/D6671M-22 Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
D7957/D7957M-22 Standard Specification for Solid Round Glass Fiber Reinforced Polymer Bars for Concrete Reinforcement
F3159-15(2022) Standard Safety Specification for Liquid Laundry Packets
C1351M-96(2022) Standard Test Method for Measurement of Viscosity of Glass Between 104 Pa·s and 108 Pa·s by Viscous Compression of a Solid Right Cylinder [Metric]
F1148-22 Standard Consumer Safety Performance Specification for Home Playground Equipment
F3548-21 Standard Specification for UAS Traffic Management (UTM) UAS Service Supplier (USS) Interoperability
D3171-22 Standard Test Methods for Constituent Content of Composite Materials
F3550-22 Standard Guide for Classifying Safety-Related Events
F3455/F3455M-22 Standard Practice for Establishing the Minimum- and Maximum-Width Configurations for Crash Testing of Exceptionally Long Variable-Width Vehicle Barriers
F1821-19e2 Standard Consumer Safety Specification for Toddler Beds
E769-22 Standard Test Methods for Odor of Methanol, Ethanol, n-Propanol, and Isopropanol
C1323-22 Standard Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature
C1624-22 Standard Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing
F2670-22 Standard Consumer Safety Specification for Infant Bath Tubs
E3299/E3299M-22 Standard Test Methods for Compression Resistance of Helmets
D1119-22 Standard Test Method for Percent Ash Content of Engine Coolants
F2316-12(2022) Standard Specification for Airframe Emergency Parachutes
D6415/D6415M-22 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
F1114-22 Standard Specification for Heat Sanitizing Commercial Pot, Pan, and Utensil Washing Machines, Stationary Rack, Water-Driven Rotary Spray Type
F1150-22 Standard Specification for Commercial Food Waste Pulper and Waterpress Assembly
F3227/F3227M-22 Standard Specification for Environmental Systems in Aircraft
F3254-22 Standard Specification for Aircraft Interaction of Systems and Structures
D3811/D3811M-21a Standard Test Method for Unwind Force of Pressure-Sensitive Tapes
F1202-22 Standard Specification for Washing Machines, Heat Sanitizing, Commercial, Pot, Pan, and Utensil Vertically Oscillating Arm Type
F1203-22 Standard Specification for Washing Machines—Pot, Pan, and Utensil, Heat Sanitizing, Commercial Rotary Conveyor Type
F3215-22 Standard Specification for Food Waste Dehydrators
C92-95(2022)e1 Standard Test Methods for Sieve Analysis and Water Content of Refractory Materials
C357-07(2022)e1 Standard Test Method for Bulk Density of Granular Refractory Materials
C914-09(2022)e1 Standard Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
E459-22 Standard Test Method for Measuring Heat Transfer Rate Using a Thin-Skin Calorimeter
E490-22 Standard Solar Constant and Zero Air Mass Solar Spectral Irradiance Tables
F3035-22 Standard Practice for Production Acceptance in the Manufacture of a Fixed Wing Light Sport Aircraft
E422-22 Standard Test Method for Measuring Net Heat Flux Using a Water-Cooled Calorimeter
D685-22 Standard Practice for Conditioning Paper and Paper Products for Testing
D1968-22 Standard Terminology Relating to Paper and Paper Products
D4727/D4727M-22 Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes
C365/C365M-22 Standard Test Method for Flatwise Compressive Properties of Sandwich Cores
C867-94(2022) Standard Test Method for Soluble Sulfate in Ceramic Whiteware Clays (Photometric Method)
C958-92(2022) Standard Test Method for Particle Size Distribution of Alumina or Quartz by X-Ray Monitoring of Gravity Sedimentation
D5450/D5450M-22 Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders
D6772/D6772M-22 Standard Test Method for Dimensional Stability of Sandwich Core Materials
C1069-09(2022) Standard Test Method for Specific Surface Area of Alumina or Quartz by Nitrogen Adsorption
D5448/D5448M-22 Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders
D5449/D5449M-22 Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders
F2907-22 Standard Consumer Safety Specification for Sling Carriers
D5616-04(2022) Standard Specification for Reclaimed Trichloroethylene
D6790/D6790M-22 Standard Test Method for Determining Poisson's Ratio of Honeycomb Cores
D6505-00(2022) Standard Test Method for Assay of normal-Propyl Bromide Content
D2106-07(2022) Standard Test Methods for Determination of Amine Acid Acceptance (Alkalinity) of Halogenated Organic Solvents
D6806-02(2022) Standard Practice for Analysis of Halogenated Organic Solvents and Their Admixtures by Gas Chromatography
D2110-00(2022) Standard Test Method for pH of Water Extractions of Halogenated Organic Solvents and Their Admixtures
D2109-01(2022) Standard Test Methods for Nonvolatile Matter in Halogenated Organic
D2989-01(2022) Standard Test Method for Acidity-Alkalinity of Halogenated Organic Solvents and
D7336/D7336M-22 Standard Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials
D8451-22 Standard Test Method for Calculation of Unfixed Chrome Concentration in Wet Blue
D3316-06(2022) Standard Test Method for Stability of Perchloroethylene with Copper
D3401-97(2022) Standard Test Methods for Water in Halogenated Organic Solvents and Their Admixtures
D4079-00(2022) Standard Specification for Vapor-Degreasing Grade Methylene Chloride
F1645/F1645M-22 Standard Test Method for Water Migration in Honeycomb Core Materials
D5168-22 Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers
D5487-16(2022) Standard Test Method for Simulated Drop of Loaded Containers by Shock Machines
D5570/D5570M-10(2022) Standard Test Method for Water Resistance of Tape and Adhesives Used as Box Closure
D3800-22 Standard Test Method for Density of High-Modulus Fibers
E1559-09(2022) Standard Test Method for Contamination Outgassing Characteristics of Spacecraft Materials
C271/C271M-16(2022)e1 Standard Test Method for Density of Sandwich Core Materials
C366/C366M-16(2022)e1 Standard Test Methods for Measurement of Thickness of Sandwich Cores
F327-08(2022) Standard Practice for Sampling Gas Blow Down Systems and Components for Particulate Contamination by Automatic Particle Monitor Method
D7030-04(2022) Standard Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine
D4728-17(2022) Standard Test Method for Random Vibration Testing of Shipping Containers
F735-22 Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method
F2078-22 Standard Terminology Relating to Hydrogen Embrittlement Testing
F2549-22 Standard Consumer Safety Specification for Frame Child Carriers
F1776-22 Standard Specification for Eye Protective Devices for Paintball Sports
F1064-21 Standard Practice for Sampling and Inspection of Complete and Incomplete Alpine Ski/Binding/Boot Systems in Rental Applications
F2167-22 Standard Consumer Safety Specification for Infant Bouncer Seats
D4102/D4102M-22 Standard Test Method for Thermal Oxidative Resistance of Carbon Fibers
F1955-22 Standard Test Method for Flammability of Sleeping Bags
E3310/E3310M-22 Standard Test Method for Evaluating Ground Robot Capabilities and Remote Operator Proficiency: Maneuvering: Align Ground Contacts with Parallel Rails
E3311/E3311M-22 Standard Test Method for Evaluating Ground Robot Capabilities and Remote Operator Proficiency: Obstacles: Variable Height Rails
F2879-22 Standard Specification for Eye Protective Devices for Airsoft Sports
E1922/E1922M-22 Standard Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
D4332-22 Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing
D8388/D8388M-22 Standard Practice for Flexural Residual Strength Testing of Damaged Sandwich Constructions
D5827-22 Standard Test Method for Analysis of Engine Coolant for Chloride and Other Anions by Ion Chromatography
D2847-22 Standard Practice for Testing Engine Coolants in Car and Light Truck Service
F734-17(2022) Standard Test Method for Shear Strength of Fusion Bonded Polycarbonate Aerospace Glazing Material
F862-11(2022) Standard Practice for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids
F2108-17(2022) Standard Practice for Inspection of Transparent Parts by Prism
F2109-01(2022) Standard Test Method to Determine Color Change and Staining Caused by Aircraft Maintenance Chemicals upon Aircraft Cabin Interior Hard Surfaces
F2156-17(2022) Standard Test Method for Measuring Optical Distortion in Transparent Parts Using Grid Line Slope
F387-17(2022) Standard Test Method for Measuring Thickness of Resilient Floor Covering With Foam Layer
F2845-22 Standard Test Method for Measuring the Dynamic Stiffness (DS) and Cylindrical Coefficient of Restitution (CCOR) of Baseballs and Softballs
F373-13(2022) Standard Test Method for Embossed Depth of Resilient Floor Coverings
F386-17(2022) Standard Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces
F2970-22 Standard Practice for Design, Manufacture, Installation, Operation, Maintenance, Inspection and Major Modification of Trampoline Courts
F2974-22 Standard Practice for Auditing Amusement Rides and Devices
F1977-22 Standard Test Method for Determining Initial, Fractional, Filtration Efficiency of a Vacuum Cleaner System
F1534-22 Standard Test Method for Determining Changes in Fire-Test-Response Characteristics of Cushioning Materials After Water Leaching
F2638-22 Standard Test Method for Using Aerosol Filtration for Measuring the Performance of Porous Packaging Materials as a Surrogate Microbial Barrier
D7933-22 Standard Test Method for Engine Coolant Stagnation in Flux-Brazed Aluminum Heat Exchangers
F1704-12(2022) Standard Test Method for Capture and Containment Performance of Commercial Kitchen Exhaust Ventilation Systems
F1817-17(2022) Standard Test Method for Performance of Conveyor Ovens
F2975-12(2022) Standard Test Method for Measuring the Field Performance of Commercial Kitchen Ventilation Systems
F3165-16(2022) Standard Specification for Throat Protective Equipment for Hockey Goaltenders
F1870-22 Standard Guide for Selection of Fire Test Methods for the Assessment of Upholstered Furnishings in Detention and Correctional Facilities
E3348/E3348M-22 Standard Guide for Body Armor for Non-Law Enforcement First Responders
F2755-22 Standard Safety Specification for Safety Labeling of Inflatable Air Mattresses
C704/C704M-15(2022)e1 Standard Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
D8450-22 Standard Specification for Environmental Conditions While Packaging Cannabis/Hemp Flower
F1550-22 Standard Test Method for Determination of Fire-Test-Response Characteristics of Components or Composites of Mattresses or Furniture for Use in Correctional Facilities after Exposure to Vandalism, by Employing a Bench Scale Oxygen Consumption Calorimet
D1974/D1974M-22 Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes
C148-17(2022) Standard Test Methods for Polariscopic Examination of Glass Containers
E2853/E2853M-22 Standard Test Method for Evaluating Ground Response Robot Capabilities: Search Tasks
E3349/E3349M-22 Standard Test Method for Evaluating Ground Robot Capabilities and Remote Operator Proficiency: Terrains: K-Rails
C169-16(2022) Standard Test Methods for Chemical Analysis of Soda-Lime and Borosilicate Glass
F3563-22 Standard Specification for Design and Construction of Large Fixed Wing Unmanned Aircraft Systems
D8440-22 Standard Specification for Food Safety and Quality of Hempseed Products Intended for Human Consumption
F2194-22e1 Standard Consumer Safety Specification for Bassinets and Cradles
F3411-22a Standard Specification for Remote ID and Tracking
F3578-22 Standard Test Method for Evaluating Exoskeleton Fall Risk due to Stumbling
F904-22 Standard Practice for Separation of Plies for Bond Strength of Laminated Flexible Materials
F2521-09(2022) Standard Specification for Heavy-Duty Ranges, Gas and Electric
F513-22 Standard Specification for Eye and Face Protective Equipment for Hockey Players
F1492-22 Standard Specification for Helmets Used in Skateboarding and Trick Roller Skating
F1587-22 Standard Specification for Head and Face Protective Equipment for Ice Hockey Goaltenders
F1898-22 Standard Specification for Helmets for Non-Motorized Wheeled Vehicles Used by Infants and Toddlers
F2032-22 Standard Specification for Helmets Used for BMX Cycling
F1952-22 Standard Specification for Helmets Used for Downhill Mountain Bicycle Racing
F3340-22 Standard Test Method for Thermal Resistance of Camping Mattresses Using a Guarded Hot Plate Apparatus
F3555-22 Standard Test Method for Measuring Impact Attenuation Characteristics of Helmets Under Induced Rotational Loading Using an Inclined Anvil
C912-17(2022) Standard Practice for Designing a Process for Cleaning Technical Glasses
F3322-22 Standard Specification for Small Unmanned Aircraft System (sUAS) Parachutes
C225-85(2022) Standard Test Methods for Resistance of Glass Containers to Chemical Attack
F3586-22 Standard Practice for Remote ID Means of Compliance to Federal Aviation Administration Regulation 14 CFR Part 89
F2613-22 Standard Consumer Safety Specification for Children's Chairs and Stools
F3304-22 Standard Specification for Lamp Fuel and Torch Fuel Packaging
F2956-22 Standard Test Methods for Anchor Systems Used for Detention Hollow Metal Systems
F504-05(2022) Standard Test Method for Measuring the Quasi-Static Release Moments of Alpine Ski Bindings
F1045-22 Standard Performance Specification for Ice Hockey Helmets
F3235-22 Standard Specification for Aircraft Storage Batteries
D8398-22 Standard Practice for Management Responsibilities in Managing a Quality Management System (QMS)
E3111/E3111M-22 Standard Test Methods for Ballistic Resistant Head Protection
D8433-22 Standard Specification for Food Safety and Quality of Hempseed Intended for Dehulling or Oil Extraction Food Purposes
F1410-98(2022) Standard Test Method for Measuring Maximum Functional Wet Volume of Utility Vacuum Cleaners
F1965-17(2022) Standard Test Method for Performance of Deck Ovens
F2474-17(2022) Standard Test Method for Heat Gain to Space Performance of Commercial Kitchen Ventilation/Appliance Systems
F494-05(2022) Standard Test Methods for Evaluating Primary Disposable Bag Integrity for Vacuum Cleaners
F1326-02(2022) Standard Test Method for Measuring Maximum Dry Volume of Utility Vacuum Cleaners
F3423/F3423M-22 Standard Specification for Vertiport Design
F977-22e1 Standard Consumer Safety Specification for Infant Walkers
D2344/D2344M-22 Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
E471-22 Standard Test Method for Obtaining Char Density Profile of Ablative Materials by Machining and Weighing
F2517-22e1 Standard Specification for Determination of Child Resistance of Portable Fuel Containers for Consumer Use
D8452-22 Standard Guide for Requirements for Medical-related Professionals within the Cannabis and Hemp Industries
D8432-22 Standard Specification for Environmental Conditions while In Transit for Packaged Cannabis/Hemp Flower
D8423-22 Standard Specification for Environmental Conditions for Post-packaged Storage and Retail Merchandising of Cannabis/Hemp Flower
F945-22 Standard Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials
E637-22 Standard Test Method for Calculation of Stagnation Enthalpy from Heat Transfer Theory and Experimental Measurements of Stagnation-Point Heat Transfer and Pressure
C324-01(2022)e1 Standard Test Method for Free Moisture in Ceramic Whiteware Clays
D1120-22 Standard Test Method for Boiling Point of Engine Coolants
D1177-22 Standard Test Method for Freezing Point of Aqueous Engine Coolants
F3343-20e1 Standard Consumer Safety Specification for Infant Bathers
D1122-22 Standard Test Method for Relative Density of Engine Coolant Concentrates and Engine Coolants By The Hydrometer
D1123-22a Standard Test Methods for Water in Engine Coolant Concentrate by the Karl Fischer Reagent Method
F3239-22a Standard Specification for Aircraft Electric Propulsion Systems
D7304-22a Standard Test Method for Determination of Denatonium Benzoate in Engine Coolant by HPLC
C545-97(2022) Standard Classification of Zircon Refractories
C673-97(2022) Standard Classification of Fireclay and High-Alumina Plastic Refractories and Ramming Mixes
C909-18(2022) Standard Practice for Dimensions of a Modular Series of Refractory Brick and Shapes
C899-79(2022) Standard Practice for Use of Metric Units of Measure for Reporting Properties of Refractory Materials
C1190-18(2022) Standard Practice for Location of Test Specimens from Magnesia-Carbon and Impregnated Burned Basic Brick
C1655-06(2022) Standard Classification of Fireclay and High-Alumina Mortars
C27-98(2022) Standard Classification of Fireclay and High-Alumina Refractory Brick
C155-97(2022) Standard Classification of Insulating Firebrick
C401-12(2022) Standard Classification of Alumina and Alumina-Silicate Castable Refractories
C416-97(2022) Standard Classification of Silica Refractory Brick
C455-07(2022) Standard Classification of Chrome, Chrome-Magnesia, Magnesia-Chrome, and Magnesia Brick
D2862-16(2022) Standard Test Method for Particle Size Distribution of Granular Activated Carbon
D3803-91(2022) Standard Test Method for Nuclear-Grade Activated Carbon
D5919-96(2022) Standard Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations
F3419-22 Standard Test Method for Mineral Characterization of Equine Surface Materials by X-Ray Diffraction (XRD) Techniques
E3350-22 Standard Guide for Community Resilience Planning for Buildings and Infrastructure
D6385-22 Standard Test Method for Determining Acid-Extractable Content in Activated Carbon by Ashing
D6646-03(2022) Standard Test Method for Determination of the Accelerated Hydrogen Sulfide Breakthrough Capacity of Granular and Pelletized Activated Carbon
F1888-09(2022) Standard Test Method for Compression-Displacement of Baseballs and Softballs
F2184-10(2022) Standard Guide for Installation of Paintball Barrier Netting
F2573-06(2022) Standard Specification for Low Velocity Resilient Material Projectile
F2574-06(2022) Standard Specification for Low Velocity Projectile Marker
F3085-14(2022) Standard Specification for Air Soft Gun Barrel Blocking Devices
IEC/ASTM 62885-7-22 Surface cleaning appliances — Part 7: Dry cleaning robots for household or similar use — Methods for measuring the performance
C1547-02(2022) Standard Classification for Fusion-Cast Refractory Blocks and Shapes
F2244-14(2022) Standard Specification for Design and Performance Requirements for Powered Parachute Aircraft
F2352-14(2022) Standard Specification for Design and Performance of Light Sport Gyroplane Aircraft
F2355-14(2022) Standard Specification for Design and Performance Requirements for Lighter-Than-Air Light Sport Aircraft
F2564-14(2022) Standard Specification for Design and Performance of a Light Sport Glider
F3153-22 Standard Specification for Verification of Aircraft Systems and Equipment
D3953-15(2022) Standard Specification for Strapping, Flat Steel and Seals
D4279-95(2022) Standard Test Methods for Water Vapor Transmission of Shipping Containers—Constant and Cycle Methods
D4675-14a(2022) Standard Guide for Selection and Use of Flat Strapping Materials1
D7860-14(2022) Standard Test Methods for Measurement of Torque Retention for Child Resistant and Non-Child Resistant Packages with Continuous Thread Closures Using Automated Torque Testing Equipment
F2203-13(2022) Standard Test Method for Linear Measurement Using Precision Steel Rule
F410-08(2022) Standard Test Method for Wear Layer Thickness of Resilient Floor Coverings by Optical Measurement
F2374-22 Standard Practice for Design, Manufacture, Operation, and Maintenance of Inflatable Amusement Devices
F3158-22 Standard Practice for Patron Transportation Conveyors Used with a Water Related Amusement Ride or Device
F924-90(2022) Standard Test Method for Resistance to Puncture of Cushioned Resilient Floor Coverings
F1063-22 Standard Practice for Functional Inspections and Adjustments of Alpine Ski/Binding/Boot Systems
C865-22 Standard Practice for Firing Refractory Concrete Specimens
D2652-22 Standard Terminology Relating to Activated Carbon
F3409-19e1 Standard Practice for Simplified Aircraft Loads Determination
D3580-22 Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products
D5112-22 Standard Test Method for Vibration (Horizontal Linear Motion) Test of Products
D8439-22 Standard Specification for Medicinal-use Cannabis Inflorescence
E3004-22 Standard Specification for Preparation and Verification of Clay Blocks Used in Ballistic-Resistance Testing of Torso Body Armor
D8477-22 Standard Practice for Cannabis or Hemp Supplier Lifecycle Management
D5277-22 Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester
F970-22 Standard Test Method for Measuring Recovery Properties of Floor Coverings after Static Loading
D8469-22 Standard Test Method for Analysis of Multiple Elements in Cannabis Matrices by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
C201-93(2019)e1 Standard Test Method for Thermal Conductivity of Refractories
D5571-22 Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Plastic Tight-head Drums Not Exceeding 60 Gal (227 L) in Rated Capacity
D8442-22 Standard Test Method for Determination of Cannabinoids in Cannabis Raw Materials and Resin Cannabis Products by Gas Chromatography and Flame Ionization Detection
D6195-22 Standard Test Methods for Loop Tack
D8196-22 Standard Practice for Determination of Water Activity (a
D8197-22 Standard Specification for Maintaining Acceptable Water Activity (a
E3110/E3110M-22 Standard Test Method for Collection of Ballistic Limit Data for Ballistic-resistant Torso Body Armor and Shoot Packs
D5632/D5632M-17(2022) Standard Specification for Halon 1301, Bromotrifluoromethane (CF
D6064-11(2022) Standard Specification for HFC-227ea, 1,1,1,2,3,3,3-Heptafluoropropane (CF
D1975-21 Standard Test Method for Environmental Stress Crack Resistance of Plastic Injection Molded Open Head Pails
C621-09(2022) Standard Test Method for Isothermal Corrosion Resistance of Refractories to Molten Glass
C863-00(2022) Standard Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures
E1549/E1549M-13(2022) Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations
C24-09(2022) Standard Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High-Alumina Refractory Materials
C454-10(2022) Standard Test Method for Disintegration of Carbon Refractories by Alkali
F3588-22 Standard Guide for Set of Objects used with A-UGVs
F2506-22 Standard Specification for Design and Testing of Light Sport Aircraft Propellers
D8410-22 Standard Specification for Evaluation of Cellulosic-Fiber-Based Packaging Materials and Products for Compostability in Municipal or Industrial Aerobic Composting Facilities
D7291/D7291M-22 Standard Test Method for Through-Thickness “Flatwise” Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material
F406-22 Standard Consumer Safety Specification for Non-Full-Size Baby Cribs/Play Yards
F2285-22 Standard Consumer Safety Performance Specification for Diaper Changing Tables for Commercial Use
D5118/D5118M-22 Standard Practice for Fabrication of Fiberboard Shipping Boxes
F2337-22 Standard Test Method for Treestand Fall Arrest System
D7255-22e1 Standard Test Method for Abrasion Resistance of Leather (Rotary Platform, Abraser Method)
F2391-22 Standard Test Method for Measuring Package and Seal Integrity Using Helium as the Tracer Gas
D8453/D8453M-22 Standard Practice for Open-Hole Flexural Strength of Sandwich Constructions
F3566-22 Standard Performance Specifications and Test Methods for Walk-Through Metal Detectors Used in Safety and Security
F3002-22 Standard Specification for Design of the Command and Control System for Small Unmanned Aircraft Systems (sUAS)
F2910-22 Standard Specification for Design and Construction of a Small Unmanned Aircraft System (sUAS)
F3005-22 Standard Specification for Batteries for Use in Small Unmanned Aircraft Systems (sUAS)
F119-82(2022) Standard Test Method for Rate of Grease Penetration of Flexible Barrier Materials (Rapid Method)
F3617-22 Standard Guide for Foreign Object Elimination (FOE) Elements of Basic Awareness and Personnel Certification
E3342/E3342M-22e1 Specification for Nonballistic-resistant Helmets Specifically Designed to be Worn by Law Enforcement and Corrections Officers When Maintaining Order in Violent Situations
F2607-08(2022) Standard Test Method for Measuring the Hard Surface Floor-Cleaning Ability of Household/Commercial Vacuum Cleaners
F3557-22 Standard Practice for Field Measurements of Snow Sport Freestyle Terrain Jumps
F3136-22 Standard Test Method for Oxygen Gas Transmission Rate through Plastic Film and Sheeting using a Dynamic Accumulation Method
D1386-15(2022) Standard Test Method for Acid Number (Empirical) of Synthetic and Natural Waxes
D3643-15(2022) Standard Test Method for Acid Number of Certain Alkali-Soluble Resins
F3613-22 Standard Practice for Recording the Exoskeleton Fit to the User
D1791-93(2022) Standard Test Method for Accelerated Aging of Liquid Water-Emulsion Floor Polishes
D3644-15(2022) Standard Test Method for Acid Number of Styrene-Maleic Anhydride Resins
D2834-95(2022) Standard Test Method for Nonvolatile Matter (Total Solids) in Water-Emulsion Floor Polishes, Solvent-Based Floor Polishes, and Polymer-Emulsion Floor Polishes
D3954-15(2022) Standard Test Method for Dropping Point of Waxes
D4283-98(2022) Standard Test Method for Viscosity of Silicone Fluids
F1037-18(2022) Standard Test Method for Visual Rating of Appearance of Resilient Floors
F3137-15(2022) Standard Specification for Headgear Used in Women’s Lacrosse (excluding Goalkeepers)
F1292-22 Standard Specification for Impact Attenuation of Surfacing Materials Within the Use Zone of Playground Equipment
F1521-22 Standard Test Methods for Performance of Range Tops
F3614-22 Standard Practice for Recording the Exoskeleton User Information
E2542-08(2022) Standard Specification for Portable Water Heaters Used at Personnel Decontamination Stations
E2543-08(2022) Standard Specification for Portable Air Heaters Used at Personnel Decontamination Stations and Shelters
F2745-15(2023) Standard Specification for Required Product Information to be Provided with an Airplane
F2840-14(2023) Standard Practice for Design and Manufacture of Electric Propulsion Units for Light Sport Aircraft
F2746-14(2023) Standard Specification for Pilot’s Operating Handbook (POH) for Light Sport Airplane
D1879-06(2023) Standard Practice for Exposure of Adhesive Specimens to Ionizing Radiation
D3163-01(2023) Standard Test Method for Determining Strength of Adhesively Bonded Rigid Plastic Lap-Shear Joints in Shear by Tension Loading
D7447-08(2023) Standard Practice for Symbolizing Adhesive Applications
D2919-01(2023) Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
D3165-07(2023) Standard Test Method for Strength Properties of Adhesives in Shear by Tension Loading of Single-Lap-Joint Laminated Assemblies
D4501-01(2023) Standard Test Method for Shear Strength of Adhesive Bonds Between Rigid Substrates by the Block-Shear Method
D5868-01(2023) Standard Test Method for Lap Shear Adhesion for Fiber Reinforced Plastic (FRP) Bonding
D2094-00(2023) Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests
F710-22 Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring
D3310-00(2023) Standard Test Method for Determining Corrosivity of Adhesive Materials
D3482-07a(2023) Standard Practice for Determining Electrolytic Corrosion of Copper by Adhesives
D5657-07(2023) Standard Test Method for Fluid Tightness Ability of Adhesives Used on Threaded Fasteners
D8454/D8454M-22 Standard Test Method for Open-Hole Compressive Strength of Sandwich Constructions
D3556-23 Standard Guide for Deposition on Glassware During Mechanical Dishwashing
F3403-23 Standard Specification for Heterogeneous Polyurethane Sheet Flooring
D1610-18(2023) Standard Practice for Conditioning Leather and Leather Products for Testing
D1813-13(2023) Standard Test Method for Measuring Thickness of Leather Test Specimens
D1912-00(2023) Standard Test Method for Cold-Crack Resistance of Upholstery Leather
D2097-03(2023) Standard Test Method for Flex Testing of Finish on Upholstery Leather
D2099-14(2023) Standard Test Method for Dynamic Water Resistance of Shoe Upper Leather by the Maeser Water Penetration Tester
D2208-16(2023) Standard Test Method for Breaking Strength of Leather by the Grab Method
D2322-14(2023) Standard Test Method for Resistance of Shoe Upper Leather to Artificial Perspiration
F3115/F3115M-23 Standard Specification for Structural Durability for Small Aeroplanes
F590-22 Standard Consumer Safety Specification for Non-Powder Gun Projectiles and Propellants
F589-23 Standard Consumer Safety Specification for Non-Powder Guns
F736-17(2023) Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
F791-18(2023) Standard Test Method for Stress Crazing of Transparent Plastics
F2111-22 Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes
D4704-13(2023) Standard Test Method for Tearing Strength, Tongue Tear of Leather
D4705-18(2023) Standard Test Method for Stitch Tear Strength of Leather, Double Hole
D5052-18(2023) Standard Test Method for Permeability of Leather to Water Vapor
D6076-18(2023) Standard Test Method for Shrinkage Temperature of Leather
D6077-16(2023) Standard Test Method for Trapezoid Tearing Strength of Leather
D6116-18(2023) Standard Test Method for Blocking
F2128-22 Standard Test Method for Treestand Repetitive Loading Capability
D8137-18(2023) Practice for Accelerated Aging of Leather
D7912-14(2023) Standard Test Method for Resistance of Finish to Heat Aging (Finish Stability)
F3231/F3231M-23 Standard Specification for Electrical Systems for Aircraft with Combustion Engine Electrical Power Generation
F3600-22 Standard Guide for Unmanned Aircraft System (UAS) Maintenance Technician Qualification
F1004-23 Standard Consumer Safety Specification for Expansion Gates and Expandable Enclosures
F2906-23 Standard Consumer Safety Specification for Bedside Sleepers
F3191-23 Standard Practice for Field Determination of Substrate Water Absorption (Porosity) for Substrates to Receive Resilient Flooring
F3576-22 Standard Practice for Recording the Exoskeleton Test Configuration
D1517-23 Standard Terminology Relating to Leather
F3583-22 Standard Test Method for Exoskeleton Use: Beams
F3581-22 Standard Test Method for Exoskeleton Use: Hurdles
F3619-22 Standard Specification for Aeroelasticity Requirements for a Light Sport Airplane
D8287/D8287M-22 Standard Test Method for Compressive Residual Strength Properties of Damaged Sandwich Composite Panels
F2057-23 Standard Safety Specification for Clothing Storage Units
D4255/D4255M-20e1 Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
F790-23 Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures
F326-23 Standard Test Method for Electronic Measurement for Hydrogen Embrittlement From Cadmium-Electroplating Processes
F476-23 Standard Test Methods for Security of Swinging Door Assemblies
F1917-23 Standard Consumer Safety Performance Specification for Infant Bedding and Related Accessories
D8493-23 Standard Guide for Sample Preparation of Cannabis and Hemp Inflorescence for Laboratory Analysis
F952-12(2023) Standard Specification for Mixing Machines, Food, Electric
F1047-17(2023) Standard Specification for Frying and Braising Pans, Tilting Type
F1126-12(2023) Standard Specification for Food Cutters (Electric)
F1163-23 Standard Specification for Protective Headgear Used in Horse Sports and Horseback Riding
F1217-17(2023) Standard Specification for Cooker, Steam
F2793-14(2023) Standard Specification for Bicycle Grips
C1495-16(2023) Standard Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics
C1211-18(2023) Standard Test Method for Flexural Strength of Advanced Ceramics at Elevated Temperatures
C1326-13(2023) Standard Test Method for Knoop Indentation Hardness of Advanced Ceramics
C1684-18(2023) Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature—Cylindrical Rod Strength
F1602-12(2023) Standard Specification for Kettles, Steam-Jacketed, 20 to 200 gal (75.7 to 757 L), Floor or Wall Mounted, Direct Steam, Gas and Electric Heated
F693-01(2023) Standard Practice for Sealing Seams of Resilient Sheet Flooring Products by Use of Liquid Seam Sealers
F1568-12(2023) Standard Specification for Food Processors, Electric
F3330-23 Standard Specification for Training and the Development of Training Manuals for the UAS Operator
F3341/F3341M-23 Standard Terminology for Unmanned Aircraft Systems
F3493-23 Standard Practice for Measuring Dynamic Characteristics of Water Slide Systems Using Instrumented Humans
F1963-05(2023) Standard Specification for Deep-Fat Fryers, Gas or Electric, Open
F1966-12(2023) Standard Specification for Dough Divider and Rounding Machines
F1603-17(2023) Standard Specification for Kettles, Steam-Jacketed, 32 oz to 20 gal (1 to 75.7 L), Tilting, Table Mounted, Direct Steam, Gas and Electric Heated
F3582-22 Standard Test Method for Exoskeleton Use: Gaps
C1161-18(2023) Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
F2835-10(2023) Standard Specification for Underfired Broilers
F2834-10a(2023) Standard Specification for Induction Cooktops, Counter Top, Drop-in Mounted, or Floor Standing
F3264-23 Standard Specification for Normal Category Aeroplanes Certification
E3078/E3078M-23 Standard Practice for Conditioning of Hard Armor Test Items
F3442/F3442M-23 Standard Specification for Detect and Avoid System Performance Requirements
F3584-22 Standard Test Method for Exoskeleton Use: Obstacle Avoidance: Walking
E3343/E3343M-23 Test Methods for Nonballistic-resistant Helmets Worn by Law Enforcement and Corrections
C674-13(2023) Standard Test Methods for Flexural Properties of Ceramic Whiteware Materials
C1023-10(2023) Standard Practice for Labeling Ceramic Art Materials for Chronic Adverse Health Hazards
C1606-10(2023) Standard Test Method for Sampling Protocol for TCLP Testing of Container Glassware
C373-18(2023) Standard Test Methods for Determination of Water Absorption and Associated Properties by Vacuum Method for Pressed Ceramic Tiles and Glass Tiles and Boil Method for Extruded Ceramic Tiles and Non-tile Fired Ceramic Whiteware Products
D8465-23 Standard Guide for Whole Hemp Seed Storage at Primary Production Facilities
E3141/E3141M-23 Standard Test Method for Ballistic Resistant Shields for Law Enforcement
D4991-07(2023) Standard Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method
F2286-16(2023) Standard Design and Performance Specification for Removable Mesh Fencing for Swimming Pools, Hot Tubs, and Spas
D8135-17(2023) Standard Guide for Selection of Substitute, Non-hazardous, Particulate Solid Filling Substances for Packagings Subjected to the United Nations Performance Tests
D2658-18(2023) Standard Test Method for Determining Dimensions of Fiberboard Boxes
D996-23 Standard Terminology of Packaging and Distribution Environments
D8375-23 Standard Test Method for Determination of Cannabinoid Concentration in Dried Cannabis and Hemp Raw Materials using Liquid Chromatography Tandem Mass Spectrometry (LC-MS/MS)
D8399-23 Standard Test Method for Multi-residue Analysis of Pesticides in Dried Cannabis and Hemp Raw Materials Using Liquid Chromatography-Tandem Mass Spectrometry (LC-MS/MS)
F2013-10(2023) Standard Test Method for Determination of Residual Acetaldehyde in Polyethylene Terephthalate Bottle Polymer Using an Automated Static Head-Space Sampling Device and a Capillary GC with a Flame Ionization Detector
D5265-23 Standard Test Method for Bridge Impact Testing
D7616/D7616M-11(2023) Standard Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures
F34-13(2023) Standard Practice for Construction of Test Cell for Liquid Extraction of Flexible Barrier Materials
F1308-98(2023) Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products
F1884-04(2023) Standard Test Methods for Determining Residual Solvents in Packaging Materials
F2251-13(2023) Standard Test Method for Thickness Measurement of Flexible Packaging Material
F1921/F1921M-12(2023) Standard Test Methods for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs
F3117/F3117M-23a Standard Specification for Crew Interface in Aircraft
F3168-23 Standard Practice for Hayride Attractions
F3214-23 Standard Practice for Characterization of Fire Properties of Seating, Upholstery, and Padding Materials for Vehicles Associated with Amusement Rides and Devices
F2659-23 Standard Guide for Preliminary Evaluation of Comparative Moisture Condition of Concrete, Gypsum Cement and Other Floor Slabs and Screeds Using a Non-Destructive Electronic Moisture Meter
F1890-23 Standard Test Method for Measuring Softball and Baseball Bat Performance Factor
C467-14(2023) Standard Classification of Mullite Refractories
D4919-23 Standard Guide for Testing of Hazardous Materials (Dangerous Goods) Packagings
F2219-23 Standard Test Methods for Measuring High-Speed Bat Performance
D8449-23 Standard Specification for Label Content and Style, Format, Location, and Prominence of Elements for Consumer Products Containing Cannabinoids
D2867-23 Standard Test Methods for Moisture in Activated Carbon
D5158-23 Standard Test Method for Determination of Particle Size of Fine Mesh and Powdered Activated Carbon by Air-Jet Sieving
F1777-19(2023) Standard Practice for Paintball Game Site Operation
F1937-04(2023) Standard Specification for Body Protectors Used in Horse Sports and Horseback Riding
F2271-11(2023) Standard Specification for Paintball Marker Barrel Blocking Devices
D8176-18(2023) Standard Test Method for Mechanically Tapped Density of Activated Carbon (Powdered and Fine Mesh)
F2278-19(2023) Standard Test Method for Evaluating Paintball Barrier Netting
F2679-15(2023) Standard Specification for 6 mm Projectiles Used with Airsoft Guns
F2801-19(2023) Standard Practice for Paintball Player Safety Briefing
F2904-11(2023) Standard Specification for Warnings on Paintball Marker Accessories Used In the Sport of Paintball
F3100-15(2023) Standard Practice for Low Impact Paintball Field Operation
E3380/E3380M-23 Standard Test Method for Evaluating Ground Response Robot Endurance Using Reproducible Terrains
F3610-23 Standard Classification for Descriptions of Spaceport Capabilities
D8505/D8505M-23 Standard Specification for Basalt and Glass Fiber Reinforced Polymer (FRP) Bars for Concrete Reinforcement
F3601-23 Standard Practice for Structural Finite Element Model Verification and Validation
D4300-23 Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi
D7388-23 Standard Specification for Engine Coolant Grade 1,3-Propanediol (PDO)
F1516-23 Standard Practice for Sealing Seams of Resilient Flooring Products by the Heat Weld Method (when Recommended)
D907-15(2023) Standard Terminology of Adhesives
D1062-08(2023) Standard Test Method for Cleavage Strength of Metal-to-Metal Adhesive Bonds
D1582-98(2023) Standard Test Method for Nonvolatile Content of Liquid Phenol, Resorcinol, and Melamine Adhesives
D1913-00(2023) Standard Test Method for Resistance to Wetting of Garment-Type Leathers
D1876-08(2023) Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)
D2095-96(2023) Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens
D2851-15(2023) Standard Specification for Liquid Optical Adhesive
D3929-03(2023) Standard Test Method for Evaluating Stress Cracking of Plastics by Adhesives Using the Bent-Beam Method
D3930-08(2023) Standard Specification for Adhesives for Wood-Based Materials for Construction of Manufactured Homes
D6264/D6264M-23 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force
D3931-08(2023) Standard Test Method for Determining Strength of Gap-Filling Adhesive Bonds in Shear by Compression Loading
E1177-23 Standard Specification for Engine Coolant Grade Glycol
D4317-16(2023) Standard Specification for Polyvinyl Acetate-Based Emulsion Adhesives
D4680-98(2023) Standard Test Method for Creep and Time to Failure of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)
D5053-03(2023) Standard Test Method for Colorfastness of Crocking of Leather
D4800-94(2023) Standard Guide for Classifying and Specifying Adhesives
D5552-10(2023) Standard Test Method for Resistance of Colored Leather to Bleeding
D5649-15(2023) Standard Test Method for Torque Strength of Adhesives Used on Threaded Fasteners
D5824-98(2023) Standard Test Method for Determining Resistance to Delamination of Adhesive Bonds in Overlay-Wood Core Laminates Exposed to Heat and Water
D7750-23 Standard Test Method for Cure Behavior of Thermosetting Resins by Dynamic Mechanical Procedures using an Encapsulated Specimen Rheometer
D7966/D7966M-16(2023) Standard Test Method for Resistance to Creep of Adhesives in Static Shear by Compression Loading (Wood-to-Wood)
C965-23 Standard Practice for Measuring Viscosity of Glass Above the Softening Point
F3096-23 Standard Performance Specification for Tipover Restraint(s) Used with Clothing Storage Unit(s)
D6014-00(2023) Standard Test Method for Determination of Dynamic Water Absorption of Leather Surfaces
D7709-12(2023) Standard Test Methods for Measuring Water Vapor Transmission Rate (WVTR) of Pharmaceutical Bottles and Blisters
D7766/D7766M-23 Standard Practice for Damage Resistance Testing of Sandwich Constructions
F942-18(2023)e1 Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures
F1115-16(2023) Standard Test Method for Determining the Carbon Dioxide Loss of Beverage Containers
F1316-18(2023) Standard Test Method for Measuring the Transmissivity of Transparent Parts
F1362-18(2023) Standard Test Method for Shear Strength and Shear Modulus of Aerospace Glazing Interlayer Materials
F3299-18(2023) Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using an Electrolytic Detection Sensor (Coulometric P
C1407-23 Standard Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes
C1341-13(2023) Standard Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
C1836-16(2023) Standard Classification for Fiber Reinforced Carbon-Carbon Composite Structures
C1835-16(2023) Standard Classification for Fiber Reinforced Silicon Carbide-Silicon Carbide (SiC-SiC) Composite Structures
C1869-18(2023) Standard Test Method for Open-Hole Tensile Strength of Fiber-Reinforced Advanced Ceramic Composites
F3639-23 Standard Guide for Automatic Flight Control System Technician
E3107/E3107M-23 Standard Test Method for Resistance to Penetration and Backface Deformation for Ballistic-resistant Torso Body Armor and Shoot Packs
E3347/E3347M-23 Standard Specification for Ballistic-Resistant Shields Used by Law Enforcement Officers
D7137/D7137M-23 Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates
D8509/D8509M-23 Standard Guide for Test Method Selection and Test Specimen Design for Bolted Joint Related Properties
D8066/D8066M-23 Standard Practice Unnotched Compression Testing of Polymer Matrix Composite Laminates
D8131/D8131M-23 Standard Practice for Tensile Properties of Tapered and Stepped Joints of Polymer Matrix Composite Laminates
F2272-23 Standard Specification for Paintball Markers
D8500-23 Standard Guide for Meeting the Specifications of ASTM D8423
D8499-23 Standard Guide for Meeting the Specifications of ASTM D8432
D3878-23 Standard Terminology for Composite Materials
F3039-23 Standard Test Method for Detecting Leaks in Nonporous Packaging or Flexible Barrier Materials by Dye Penetration
D1434-23 Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting
F3300-23 Standard Test Method for Abrasion Resistance of Flexible Packaging Films Using a Reciprocating Weighted Stylus
D8498-23 Standard Guide for Compliance to the Specifications of ASTM D8450
D8270-23b Standard Terminology Relating to Cannabis
F3173/F3173M-23 Standard Specification for Aircraft Handling Characteristics
F3561-23 Standard Test Method for Forced-Entry-Resistance of Fenestration Systems After Simulated Active Shooter Attack
F770-23 Standard Practice for Ownership, Operation, Maintenance, and Inspection of Amusement Rides and Devices
E2952-23 Standard Specification for Air-Purifying Respiratory Protective Smoke Escape Devices (RPED)
F747-23 Standard Terminology Relating to Amusement Rides and Devices
F446-19(2023) Standard Consumer Safety Specification for Grab Bars and Accessories Installed in the Bathing Area
F2195-18(2023) Standard Specification for Linoleum Floor Tile
C1648-12(2023) Standard Guide for Choosing a Method for Determining the Index of Refraction and Dispersion of Glass
E3113-23 Standard Specification for Ballistic-resistant Vehicle Door Panels Used by Public Safety Agencies
F444-88(2023) Standard Consumer Safety Specification for Scald-Preventing Devices and Systems in Bathing Areas
F445-88(2023) Standard Consumer Safety Specification for Thermal-Shock-Preventing Devices and Systems in Showering Areas
D3802-23 Standard Test Method for Ball-Pan Hardness of Activated Carbon
F3266-23 Standard Guide for Training for Remote Pilot in Command of Unmanned Aircraft Systems (UAS) Endorsement
F1346-23 Standard Performance Specification for Safety Covers and Labeling Requirements for All Covers for Swimming Pools, Spas and Hot Tubs
C1674-23 Standard Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures
F1193-23 Standard Practice for Quality, Manufacture, and Construction of Amusement Rides and Devices
F2960-23 Standard Practice for Permanent Amusement Railway Ride Tracks and Related Devices
F3654-23 Standard Test Method for Non-Subjective Optical Requirement Testing of Plano Protective Eyewear
F3054-23 Standard Practice for Operations of Amusement Railway Rides, Devices, and Facilities
F2093-18(2023) Standard Test Method for Performance of Rack Ovens
F2380-18(2023) Standard Test Method for Performance of Conveyor Toasters
F2473-12(2023) Standard Test Method for Performance of Water-Bath Rethermalizers
F3066/F3066M-23 Standard Specification for Aircraft Powerplant Installation Hazard Mitigation
F1484-18(2023) Standard Test Methods for Performance of Steam Cookers
D500-95(2023) Standard Test Methods of Chemical Analysis of Sulfonated and Sulfated Oils
F2959-23a Standard Practice for Aerial Adventure Courses
D501-03(2023) Standard Test Methods of Sampling and Chemical Analysis of Alkaline Detergents
F3238-17(2023) Standard Specification for Design and Installation of an Infrared (IR) Searchlight System (USA)
D502-89(2023) Standard Test Method for Particle Size of Soaps and Other Detergents
D820-93(2023) Standard Test Methods for Chemical Analysis of Soaps Containing Synthetic Detergents
D1173-23 Standard Test Method for Foaming Properties of Surface-Active Agents
D1570-95(2023) Standard Test Methods for Sampling and Chemical Analysis of Fatty Alkyl Sulfates
F2461-23 Standard Practice for Manufacture, Construction, Operation, and Maintenance of Aquatic Play Equipment
F2654-23 Standard Specification for Airsoft Gun Warnings
D2024-09(2023) Standard Test Method for Cloud Point of Nonionic Surfactants
D8485-23 Standard Test Method for Corrosion Test for Electric Vehicle Coolants in Glassware
F88/F88M-23 Standard Test Method for Seal Strength of Flexible Barrier Materials
C134-95(2023) Standard Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick
C604-18(2023) Standard Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
C830-00(2023) Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
C987-10(2023) Standard Test Method for Vapor Attack on Refractories for Furnace Superstructures
C1223-19(2023) Standard Test Method for Testing of Glass Exudation from AZS Fusion-Cast Refractories
C1656-13(2023) Standard Guide for Measuring the Reactivity of Hydraulic Refractory Castables Using Exothermic Profile
F2376-23 Standard Practice for Classification, Design, Manufacture, Construction, and Operation of Water Slide Systems
F2245-23 Standard Specification for Design and Performance of a Light Sport Airplane
F3099-23 Standard Practices for Parasailing
F3237-23 Standard Terminology Relating to Snow Sport Freestyle Terrain Park Jumps
D2942-02(2023) Standard Test Method for Total Acid Acceptance of Halogenated Organic Solvents (Nonreflux Methods)
D4579-00(2023) Standard Practice for Handling an Acid Degreaser or Still
D4081-16(2023) Standard Specification for Drycleaning-Grade Perchloroethylene
D5395-03(2023) Standard Specification for Reclaimed Methylene Chloride
D5960-03(2023) Standard Specification for Technical Grade Ethylene Dichloride
D6368-06(2023) Standard Specification for Vapor-Degreasing Solvents Based on normal-Propyl Bromide and Technical Grade normal-Propyl Bromide
D4009-92(2023) Standard Guide for Foam Stability of Hand Dishwashing Detergents
F2641-23 Standard Consumer Safety Specification for Recreational Powered Scooters and Pocket Bikes
F3364-23 Standard Practice for Independent Audit Program for Unmanned Aircraft Operators
F2908-23 Standard Specification for Unmanned Aircraft Flight Manual (UFM) for an Unmanned Aircraft System (UAS)
F3365-23 Standard Practice for Compliance Audits to ASTM Standards on Unmanned Aircraft Systems
F910-04(2023) Standard Specification for Face Guards for Youth Baseball
F1975-15(2023) Standard Specification for Nonpowered Bicycle Trailers Designed for Human Passengers
F2220-15(2023) Standard Specification for Headforms
F2681-18(2023) Standard Specification for Body Protectors Used in Equine Racing
F2918-11(2023) Standard Test Method for Weighing a Bicycle
D8397-23 Standard Specification for Acrylic and Reactive Adhesives for Installation of Vinyl and Rubber Floor Coverings
F2417-23 Standard Specification for Fire Safety for Candles
F2976-13(2023) Standard Practice for Determining the Field Performance of Commercial Kitchen Demand Control Ventilation Systems
F3404-23a Standard Specification for Heterogeneous Polyurethane Tile or Plank Flooring
F3377-23 Standard Terminology Relating to Commercial Spaceflight
F3660-23 Standard Consumer Safety Performance Specification for Motorized Partitions
D7818-23 Standard Test Method for Enumeration of Proteolytic Bacteria in Fresh (Uncured) Hides and Skins
D1455-17(2023) Standard Test Method for 60° Specular Gloss of Emulsion Floor Polish
D1792-17(2023) Standard Test Method for Long-Term Removability Properties of Emulsion Floor Polishes
F2276-23 Standard Specification for Fitness Equipment
F3603-23 Standard Specification for Eye Protectors for Handball
D3209-93(2023) Standard Test Method for Freeze/Thaw Resistance of Polymer Floor Polishes
D3210-95(2023) Standard Test Method for Comparing Colors of Films from Water-Emulsion Floor Polishes
D3321-19(2023) Standard Test Method for Use of the Refractometer for Field Test Determination of the Freezing Point of Aqueous Engine Coolants
D3495-10(2023) Standard Test Method for Hexane Extraction of Leather
D4725-15(2023) Standard Terminology for Engine Coolants and Related Fluids
D4985-10(2023) Standard Specification for Low Silicate Ethylene Glycol Base Engine Coolant for Heavy Duty Engines Requiring a Pre-Charge of Supplemental Coolant Additive (SCA)
D5828-97(2023) Standard Test Method for Compatibility of Supplemental Coolant Additives (SCAs) and Engine Coolant Concentrates
D6660-01(2023) Standard Test Method for Freezing Point of Aqueous Ethylene Glycol Base Engine Coolants by Automatic Phase Transition Method
D7515-19(2023) Standard Test Method for Purity of 1,3-Propanediol (Gas Chromatographic Method)
D4002-81(2023) Standard Practice for Evaluation of Buffable Shoe Polish
F1869-23 Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride
D4655-95(2023) Standard Test Methods for Sulfates in Leather (Total, Neutral, and Combined Acid)
D4906-95(2023) Standard Test Method for Total Solids and Ash Content in Leather Finishing Materials
D5678-17(2023) Standard Test Method for Freeze/Thaw Resistance of Wax Emulsion Floor Polish
D6016-17(2023) Standard Test Method for Determination of Nitrogen, Water Extractable in Leather
D6827-02(2023) Standard Test Method for Zinc Analysis of Floor Polishes and Floor Polish Polymers By Flame Atomic Absorption (A.A.)
D7583-16(2023) Standard Test Method for John Deere Coolant Cavitation Test
D8042-18(2023) Test Method for Shrinkage Temperature of Wet Blue and Wet White
F3331-18(2023) Standard Practice for Aircraft Water Loads
D3479/D3479M-19(2023) Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials
D5766/D5766M-23 Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates
D6182-23 Standard Test Method for Flexibility and Adhesion of Finish on Leather
D8039-16(2023) Standard Specification for Heat Transfer Fluids (HTF) for Heating and Air Conditioning (HVAC) Systems
D7816-23 Standard Test Method for Enumeration of Halophilic and Proteolytic Bacteria in Raceway Brine, Brine-Cured Hides and Skins
F312-08(2023) Standard Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters
E2521-23 Standard Terminology for Evaluating Response Robot Capabilities
D8511/D8511M-23 Standard Guide for Design and Analysis of Local Buckling and Crippling Test Specimens
D8510/D8510M-23 Standard Test Method for Local Buckling and Crippling under Axial Compressive Loading
D8040-18(2023) Standard Test Method for Corrosion Test for Heat Transfer Fluids in Glassware
F303-08(2023)e1 Standard Practices for Sampling for Particles in Aerospace Fluids and Components
F3082/F3082M-23a Standard Specification for Weights and Centers of Gravity of Aircraft
D4018-23 Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows
F2291-23b Standard Practice for Design of Amusement Rides and Devices
F555-01(2023) Standard Test Method for Motor Life Evaluation of an Upright Vacuum Cleaner
F884-01(2023) Standard Test Method for Motor Life Evaluation of a Built-In (Central Vacuum) Vacuum Cleaner
F922-01(2023) Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle
F1038-02(2023) Standard Test Method for Motor Life Evaluation of a Canister, Hand-held, Stick, and Utility Type Vacuum Cleaner Without a Driven Agitator
F1601-01(2023) Standard Test Method for Motor Life Evaluation of an Electric Motorized Nozzle for Central Vacuum Cleaning Systems
F1692-01(2023) Standard Test Method for Life Evaluation of a Turbine-Powered Nozzle for Household Central Vacuum Cleaning Systems
F2647-07(2023) Standard Guide for Approved Methods of Installing a CVS (Central Vacuum System)
F2863-11(2023) Standard Specification for Central Vacuum Hose Inlet Valve Socket Dimensions
D5961/D5961M-23 Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates
D6873/D6873M-23 Standard Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates
F3083/F3083M-23a Standard Specification for Emergency Conditions, Occupant Safety and Accommodations
D6742/D6742M-23 Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates
D7248/D7248M-23 Standard Test Method for High Bearing - Low Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens
D7615/D7615M-23 Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates
F3568-23 Standard Guide for Medical Qualifications for Suborbital Vehicle Passengers
F141-23 Standard Terminology Relating to Resilient Floor Coverings
D1596-14(2023) Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material
D3332-99(2023) Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines
D3951-18(2023) Standard Practice for Commercial Packaging
D4577-19(2023) Standard Test Method for Compression Resistance of a Container Under Constant Load
D5276-19(2023) Standard Test Method for Drop Test of Loaded Containers by Free Fall
D7932-17(2023) Standard Specification for Printed, Pressure-Sensitive Adhesive Labels for Use in Extreme Distribution Environments
E3002-15(2023) Standard Practice for Assessing the Comparative Efficacy of Products Used for the Decontamination of Chemical Warfare Agents (CWAs) on Skin
F3599-23 Standard Guide for Aerospace/Aviation Powerplant Personnel Certification
D6484/D6484M-23 Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
D8132/D8132M-23 Standard Test Method for Determination of Prepreg Impregnation by Permeability Measurement
E3408/E3408M-23 Standard Test Method for Evaluating Ground Response Robot Capabilities: Dexterity: Linear Inspection
F3179/F3179M-23 Standard Specification for Performance of Aircraft
F963-23 Standard Consumer Safety Specification for Toy Safety
F3559-23 Standard Guide for ASTM F24 Standards Governing Lifecycle Management of Amusement Rides and Devices
C609-23 Standard Test Method for Measurement of Light Reflectance Value and Small Color Differences Between Pieces of Ceramic Tile
C1026-23 Standard Test Method for Measuring the Resistance of Ceramic and Glass Tile to Freeze-Thaw Cycling
C1243-23 Standard Test Method for Relative Resistance to Deep Abrasive Wear of Unglazed Ceramic Tile by Rotating Disc
D3950-23 Standard Specification for Strapping, Nonmetallic (and Joining Methods)
D7332/D7332M-23 Standard Test Method for Measuring the Fastener Pull-Through Resistance of a
D8041/D8041M-16(2023) Standard Test Method for Whole Boot Breathability (MVTR)
F3367-23 Standard Practice for Simplified Methods for Addressing High-Intensity Radiated Fields (HIRF) and Indirect Effects of Lightning on Aircraft
D8387/D8387M-23 Standard Test Method for High Bypass – Low Bearing Interaction Response of Polymer Matrix Composite Laminates
F3668/F3668M-23 Standard Guide for Occupant Survivability in Orbital Vehicles
D4762-23 Standard Guide for Testing Polymer Matrix Composite Materials
F3232/F3232M-23a Standard Specification for Flight Controls in Small Aircraft
F2097-23 Standard Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products
F3116/F3116M-23a Standard Specification for Design Loads and Conditions
F3396/F3396M-23a Standard Practice for Aircraft Simplified Loads Criteria
F3658-23 Standard Guide for Crewed Suborbital Space Vehicle Design
F2813-18(2023) Standard Specification for Glass Used as a Horizontal Surface in Desks and Tables
D7790-19(2023) Standard Guide for Preparation of Plastic Packagings Containing Liquids for United Nations (UN) Drop Testing
D8134-18(2023) Standard Guide for Conducting Internal Hydrostatic Pressure Tests on United Nations (UN) IBC Design Types
F392/F392M-23 Standard Practice for Conditioning Flexible Barrier Materials for Flex Durability
F3061/F3061M-23b Standard Specification for Systems and Equipment in Aircraft
D7713-18(2023) Standard Specification for Aqueous Engine Coolant Grade Glycol (53 % by Volume Nominal)
D6107-97(2023) Standard Specification for Stop-Leak Additive for Engine Coolants Used in Light Duty Service
F2656/F2656M-23 Standard Test Method for Crash Testing of Vehicle Security Barriers
D3474-23 Standard Practice for Calibration and Use of Torque Meters Used in Packaging Applications
C158-23 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
F1081-23 Standard Specification for Competition Wrestling Mats
F3545-23 Standard Test Method for Static Loading of Treestands, Climbing Sticks, and Tripod or Tower Stands
F2217/F2217M-13(2023) Standard Practice for Coating/Adhesive Weight Determination
D6856/D6856M-23 Standard Guide for Testing Fabric-Reinforced “Textile” Composite Materials
D7437-23 Standard Test Method for Temperature and Hard Water Stability of Engine Coolants
C613-23 Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction
E1548-23 Standard Practice for Preparation of Aerospace Contamination Control Plans
F2123-23 Standard Practice for Treestand Instructions
C456-18(2023) Standard Test Method for Hydration Resistance of Basic Bricks and Shapes
C492-92(2023) Standard Test Method for Hydration of Granular Dead-Burned Refractory Dolomite
C831-18(2023) Standard Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes
F3246-18(2023) Standard Specification for Quality Assurance for Manufacturers of Aircraft Systems
E2601-23 Standard Practice for Radiological and Nuclear Emergency Response
C544-18(2023) Standard Test Method for Hydration of Dead-Burned Magnesite or Periclase Grain
C1279-23 Standard Test Method for Non-Destructive Photoelastic Measurement of Edge and Surface Stresses in Annealed, Heat-Strengthened, and Fully Tempered Flat Glass
E3395-23 Standard Test Method for Characterizing Performance of Field Screening Devices for the Identification of Biological Agents
E3394-23 Standard Specification for Field Screening Devices Used for Identification of Biological Agents
F1157-04(2023) Standard Practice for Classifying the Relative Performance of the Physical Properties of Security Seals
F1158-94(2023) Standard Guide for Inspection and Evaluation of Tampering of Security Seals
D6251/D6251M-23 Standard Specification for Wood-Cleated Panelboard Shipping Boxes
D6641/D6641M-23 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture
D1793-23 Standard Test Method for Water Spotting of Emulsion Floor Polishes
D2048-23 Standard Test Method for Powdering of Floor Polish Films
C162-23 Standard Terminology of Glass and Glass Products
D999-08(2023) Standard Test Methods for Vibration Testing of Shipping Containers
F1849-23 Standard Specification for Helmets Used in Ice Speed Skating (Long Track) and Short Track Speed Ice Skating (Not to Include Hockey)
D3898-93(2023) Standard Test Method for Chromic Oxide in Basic Chromium Tanning Liquors
F1409-23 Standard Test Method for Straight Line Movement of Vacuum Cleaners While Cleaning Carpets
F1929-23 Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration
F2175-23 Standard Specification for Portable and Permanent Emergency Escape Ladders for Residential Use
F1066-23 Standard Specification for Vinyl Composition Floor Tile
F1720-17(2023) Standard Test Method for Measuring Thermal Insulation of Sleeping Bags Using a Heated Manikin
F2268-03(2023) Standard Specification for Bicycle Serial Numbers
F2439-17(2023) Standard Specification for Headgear Used in Soccer
F3200-23 Standard Terminology for Robotics, Automation, and Autonomous Systems
F3229/F3229M-23 Standard Practice for Static Pressure System Tests in Small Aircraft
F3233/F3233M-23a Standard Specification for Flight and Navigation Instrumentation in Aircraft
F3623-23 Standard Specification for Surveillance Supplementary Data Service Providers
D5555-95(2023) Standard Test Method for Determination of Free Fatty Acids Contained in Animal, Marine, and Vegetable Fats and Oils Used in Fat Liquors and Stuffing Compounds
D5557-95(2023) Standard Test Method for Determination of Insoluble Impurities Contained in Fats and Oils Used in Fat Liquors and Stuffing Compounds
D5558-95(2023) Standard Test Method for Determination of the Saponification Value of Fats and Oils
D5559-95(2023) Standard Test Method for Determination of Acidity as Free Fatty Acids/Acid Number in the Absence of Ammonium or Triethanolamine Soaps in Sulfonated and Sulfated Oils
D7340-07(2023) Standard Practice for Thermal Conductivity of Leather
D8520/D8520M-23 Standard Specification for Iodotrifluoromethane (CF
F1914-18(2023) Standard Test Methods for Short-Term Indentation and Residual Indentation of Resilient Floor Covering
F3640-23 Standard Test Method for Full Depth Field Sampling of In-situ Synthetic Turf Infill Materials
F3265-17(2023) Standard Test Method for Grid-Video Obstacle Measurement
D7028-07(2024) Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)
D3052-23 Standard Practice for Rating Water-Emulsion Floor Polishes
D3153-23 Standard Test Method for Recoatability of Water-Emulsion Floor Polishes
D3206-23 Standard Test Method for Soil Resistance of Floor Polishes
F3673-23 Standard Specification for Performance for Weather Information Reports, Data Interfaces, and Weather Information Providers (WIPs)
F3327-23 Standard Practice for Recording the A-UGV Test Configuration
D3466-06(2023) Standard Test Method for Ignition Temperature of Granular Activated Carbon
D5228-16(2023) Standard Test Method for Determination of Butane Working Capacity of Activated Carbon
D5742-16(2023) Standard Test Method for Determination of Butane Activity of Activated Carbon
D1172-15(2024) Standard Guide for pH of Aqueous Solutions of Soaps and Detergents
D2281-10(2024) Standard Test Method for Evaluation of Wetting Agents by the Skein Test
D3050-07(2024) Standard Guide for Measuring Soil Removal from Artificially Soiled Fabrics (Not Suitable for Detergent Ranking)
F3651/F3651M-23 Standard Practice for Determining Safe-Life, Inspection Threshold and Recurring Inspection Intervals
D4008-19(2024) Standard Guide for Measuring Anti-Soil Deposition Properties of Laundry Detergents
C1940-24 Standard Test Method for Critical Mode I Interlaminar Strain Energy Release Rate of (G
F3532-23 Standard Practice for Protection of Aircraft Systems from Intentional Unauthorized Electronic Interactions
D5237-14(2024) Standard Guide for Evaluating Fabric Softeners
D3838-23 Standard Test Method for pH of Activated Carbon
D8179-18(2024) Standard Guide for Characterizing Detergents for the Cleaning of Clinically-used Medical Devices
F3041-14(2024) Standard Specification for Bonded Rubber Crumb Floor Coverings
F3429/F3429M-24 Standard Specification for Performance of Flame Mitigation Devices Installed in Disposable and Pre-Filled Flammable Liquid Containers
F3641-23 Standard Specification for Front-Mounted Bicycle Child Carriers (12 kg – 27 kg)
F430-13(2024) Standard Specification for Paper Used for Vacuum Cleaner Filter Bags
F888-06(2024) Standard Test Method for Measuring Maximum Function Volume of the Primary Dirt
F1615-19(2024) Standard Specification for Cautionary Labeling for Five-Gallon Open-Head Plastic Containers
F3084-23 Standard Consumer Safety Specification for Infant and Infant/Toddler Rockers
F3150-18(2024) Standard Specification for HEPA Filtration System Performance of Residential and Commercial Vacuum Cleaners
F3010-18(2024) Standard Practice for Two-Component Resin Based Membrane-Forming Moisture Mitigation Systems for Use Under Resilient Floor Coverings
F3657-23 Standard Specification for Verification of Lightweight Unmanned Aircraft Systems (UAS)
F3279-24 Standard Test Method for Ballistic-Resistant Security Glazing Materials
F3388-23 Standard Classification for Space Launch and Reentry Vehicles
D8528-24 Standard Test Method for Determination of Fluoride and Glycol Degradation Products in Engine Coolants by Ion Chromatography
F355-23 Standard Test Method for Impact Attenuation of Playing Surface Systems, Other Protective Sport Systems, and Materials Used for Athletics, Recreation and Play
F3441-24a Standard Guide for Measurement of pH Involving Resilient Flooring Installations
F608-24 Standard Test Method for Evaluation of Carpet Embedded Dirt Removal Effectiveness of Household/Commercial Vacuum Cleaners
C485-24 Standard Test Method for Measuring Warpage of Ceramic Tile
C1503-24 Standard Specification for Silvered Flat Glass Mirror
F1284-24 Standard Test Method for Evaluating Carpet Embedded Dirt Removal Effectiveness of Residential Central Vacuum Cleaning Systems
F1334-24 Standard Test Method for Determining A-Weighted Sound Power Level of Vacuum Cleaners
F2756-24 Standard Test Method for Determining Energy Consumption of Vacuum Cleaners
F3249-24 Standard Specification for Treestands, Climbing Sticks, and Tripod or Tower Stands
F3664-24 Standard Practice for Blast Testing
F2440-24 Standard Specification for Impact Attenuation of Wall Padding Used in Indoor Competitive and Recreational Sports Venues
C1783-15(2024) Standard Guide for Development of Specifications for Fiber Reinforced Carbon-Carbon Composite Structures for Nuclear Applications
C1793-15(2024) Standard Guide for Development of Specifications for Fiber Reinforced Silicon Carbide-Silicon Carbide Composite Structures for Nuclear Applications
C1943-24 Standard Test Method for Grout Retention Properties of Ceramic Tile
C1942-24 Standard Practice for Evaluation of Low Angle Light Characteristics
D1384-24 Standard Test Method for Corrosion Test for Engine Coolants in Glassware
F3627-24 Standard Guide for Premises Design Considering Snow and Ice Management for the Reduction of Pedestrian Slips
E3426/E3426M-24 Standard Test Method for Evaluating Aerial Response Robot Endurance
F519-23 Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments
C371-09(2024) Standard Test Method for Wire-Cloth Sieve Analysis of Nonplastic Ceramic Powders
C627-18(2024) Standard Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester
C690-09(2024) Standard Test Method for Particle Size Distribution of Alumina or Quartz Powders by Electrical Sensing Zone Technique
C1349-17(2024) Standard Specification for Architectural Flat Glass Clad Polycarbonate
C1870-18(2024) Standard Test Method for Determination of Impact Diameter from Falling Ball on Ceramic Tile
F2092-24 Standard Specification for Convection Oven Gas or Electric
F2143-24 Standard Test Method for Performance of Refrigerated Buffet and Preparation Tables
F2088-24 Standard Consumer Safety Specification for Infant and Cradle Swings
F3579-24 Standard Practice for Considering and Deploying Exoskeletons for Return to Work
D6788-24 Standard Specification for Repositionable Pressure-Sensitive Flags
D6787/D6787M-24 Standard Specification for Repositionable Note Pad
D7820-19(2024) Standard Test Method for Engine Coolant Corrosion Protection Under Accelerated Thermal and Oxidizing Conditions Using a Rotating Pressure Vessel
F1360-24 Standard Specification for Ovens, Microwave, Electric
F1551-23 Standard Test Methods for Comprehensive Characterization of Synthetic Turf Playing Surfaces and Materials
D6804-24 Standard Guide for Hand Hole Design in Corrugated Boxes
F858-24 Standard Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Single Tank, Conveyor Rack Type
F860-24 Standard Specification for Hot Water Sanitizing Commercial Dishwashing Machines, Multiple Tank, Rackless Conveyor Type
F1371-13(2024) Standard Specification for Vegetable Peeling Machines, Electric
F2988-18(2024) Standard Specification for Commercial Coffee Brewers
F3064/F3064M-24 Standard Specification for Aircraft Powerplant Control, Operation, and Indication
F3186-24 Standard Specification for Adult Portable Bed Rails and Related Products
F3684-24 Standard Guide for Tennis Court Fencing and Other Perimeter Enclosures
D5749-24 Standard Specification for Reinforced and Plain Gummed Tape for Sealing and Securing
D8336-24 Standard Test Method for Characterizing Tack of Prepregs Using a Continuous Application-and-Peel Procedure
D4169-23e1 Standard Practice for Performance Testing of Shipping Containers and Systems
F3309/F3309M-24 Standard Practice for Simplified Safety Assessment of Systems and Equipment in Small Aircraft
D3585-24 Standard Specification for ASTM Reference Fluid for Coolant Tests
F3021-23 Standard Specification for Universal Design of Fitness Equipment for Inclusive Use by Persons with Functional Limitations and Impairments
D6253-24 Standard Practice for Treatment and/or Marking of Wood Packaging Materials
F3681-24 Standard Consumer Safety Specification for Beach Umbrellas and Anchor Devices
E3005-24 Standard Terminology for Body Armor and Ballistic Protection
F3539-24 Standard Practice for Creation of Walkway Tribometer Interlaboratory Study Reports and Test Procedures
C133-24 Standard Test Methods for Cold Crushing Strength and Modulus of Rupture of Refractories
D3552-24 Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites