ASTM Volume 10.04, April 2022

Table of Contents

F1466-20 Standard Specification for Iron-Nickel-Cobalt Alloys for Metal-to-Ceramic Sealing Applications

F375-20 Standard Specification for Integrated Circuit Lead Frame Material

ISO/ASTM52911-2-19 Additive manufacturing — Design — Part 2: Laser-based powder bed fusion of polymers

ISO/ASTM52911-1-19 Additive manufacturing — Design — Part 1: Laser-based powder bed fusion of metals

ISO/ASTM52902-19 Additive manufacturing — Test artifacts — Geometric capability assessment of additive manufacturing systems

F72-21 Standard Specification for Gold Wire for Semiconductor Lead Bonding

F44-21 Standard Specification for Metallized Surfaces on Ceramic

F19-21 Standard Test Method for Tension and Vacuum Testing Metallized Ceramic Seals

F2073-14 Standard Test Method for Non-Destructive Short Circuit Testing of a Membrane Switch

F1996-14 Standard Test Method for Silver Migration for Membrane Switch Circuitry

F1596-15 Standard Test Method for Exposure of a Membrane Switch or Printed Electronic Device to Temperature and Relative Humidity

F2360-08(2015)e1 Standard Test Method for Determining Luminance of a Membrane Switch Backlit with Diffuse Light Source

E2938-15 Standard Test Method for Evaluating the Relative-Range Measurement Performance of 3D Imaging Systems in the Medium Range

F3139-15 Standard Test Method for Analysis of Tin-Based Solder Alloys for Minor and Trace Elements Using Inductively Coupled Plasma Atomic Emission Spectrometry

F1661-09(2015) Standard Test Method for Determining the Contact Bounce Time of a Membrane Switch

F1842-15 Standard Test Method for Determining Ink or Coating Adhesion on Flexible Substrates for a Membrane Switch or Printed Electronic Device

F1812-15 Standard Test Method for Determining the Effect of an ESD Discharge on a Membrane Switch or Printed Electronic Device

F1663-15 Standard Test Method for Determining the Capacitance of a Membrane Switch or Printed Electronic Device

F3147-15 Standard Test Method for Evaluating the Reliability of Surface Mounted Device (SMD) Joints on a Flexible Circuit by a Rolling Mandrel Bend

F2749-15 Standard Test Method for Determining the Effects of Creasing a Membrane Switch or Printed Electronic Device

F1843-15 Standard Practice for Sample Preparation of Plastic Films used on Membrane Switch Overlays for Specular Gloss Measurements

F2853-10(2015) Standard Test Method for Determination of Lead in Paint Layers and Similar Coatings or in Substrates and Homogenous Materials by Energy Dispersive X-Ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams

F3078-15 Standard Test Method for Identification and Quantification of Lead in Paint and Similar Coating Materials using Energy Dispersive X-ray Fluorescence Spectrometry (EDXRF)

F2576-15a Standard Terminology Relating to Declarable Substances in Materials

F2617-15 Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry

ISO/ASTM52907-19 Additive manufacturing — Feedstock materials — Methods to characterize metallic powders

F1711-96(2016) Standard Practice for Measuring Sheet Resistance of Thin Film Conductors for Flat Panel Display Manufacturing Using a Four-Point Probe Method

F1593-08(2016) Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum by High Mass-Resolution Glow-Discharge Mass Spectrometer

F773M-16 Standard Practice for Measuring Dose Rate Response of Linear Integrated Circuits (Metric)

F1709-97(2016) Standard Specification for High Purity Titanium Sputtering Targets for Electronic Thin Film Applications

F1662-16 Standard Test Method for Verifying the Specified Dielectric Withstand Voltage and Determining the Dielectric Breakdown Voltage of a Membrane Switch or Printed Electronic Device

F1710-08(2016) Standard Test Method for Trace Metallic Impurities in Electronic Grade Titanium by High Mass-Resolution Glow Discharge Mass Spectrometer

F1896-16 Test Method for Determining the Electrical Resistivity of a Printed Conductive Material

F1845-08(2016) Standard Test Method for Trace Metallic Impurities in Electronic Grade Aluminum-Copper, Aluminum-Silicon, and Aluminum-Copper-Silicon Alloys by High-Mass-Resolution Glow Discharge Mass Spectrometer

F1844-97(2016) Standard Practice for Measuring Sheet Resistance of Thin Film Conductors For Flat Panel Display Manufacturing Using a Noncontact Eddy Current Gage

F2592-16 Standard Test Method for Measuring the Force-Displacement of a Membrane Switch

F2771-10(2016) Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions

F2750-16 Standard Test Method for Determining the Effects of Bending a Membrane Switch or Printed Electronic Device

F3152-16 Standard Test Method for Determining Abrasion Resistance of Inks and Coatings on Substrates Using Dry or Wet Abrasive Medium

E3064-16 Standard Test Method for Evaluating the Performance of Optical Tracking Systems that Measure Six Degrees of Freedom (6DOF) Pose

F744M-16 Standard Test Method for Measuring Dose Rate Threshold for Upset of Digital Integrated Circuits (Metric)

F3187-16 Standard Guide for Directed Energy Deposition of Metals

F3184-16 Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion

F2971-13(2021) Standard Practice for Reporting Data for Test Specimens Prepared by Additive Manufacturing

F980-16 Standard Guide for Measurement of Rapid Annealing of Neutron-Induced Displacement Damage in Silicon Semiconductor Devices

E2641-09(2017) Standard Practice for Best Practices for Safe Application of 3D Imaging Technology

ISO/ASTM52901-16 Standard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts

F106-12(2017) Standard Specification for Brazing Filler Metals for Electron Devices

F73-96(2017) Standard Specification for Tungsten-Rhenium Alloy Wire for Electron Devices and Lamps

F30-96(2017) Standard Specification for Iron-Nickel Sealing Alloys

F76-08(2016)e1 Standard Test Methods for Measuring Resistivity and Hall Coefficient and Determining Hall Mobility in Single-Crystal Semiconductors

ISO/ASTM52903-2-20 Additive manufacturing — Material extrusion-based additive manufacturing of plastic materials — Part 2: Process equipment

ISO/ASTM52942-20 Additive manufacturing — Qualification principles — Qualifying machine operators of laser metal powder bed fusion machines and equipment used in aerospace applications

ISO/ASTM52950-21 Additive manufacturing — General principles — Overview of data processing

ISO/ASTM52915-20 Specification for additive manufacturing file format (AMF) Version 1.2

ISO/ASTM52904-19 Additive Manufacturing – Process Characteristics and Performance: Practice for Metal Powder Bed Fusion Process to Meet Critical Applications

F2980-13(2017) Standard Test Method for Analysis of Heavy Metals in Glass by Field Portable X-Ray Fluorescence (XRF)

F3291-17 Standard Test Method for Measuring the Force-Resistance of a Membrane Force Sensor

F3290-17 Standard Guide for Handling and Application of a Membrane Switch or Printed Electronic Device to its Final Support Structure

F1892-12(2018) Standard Guide for Ionizing Radiation (Total Dose) Effects Testing of Semiconductor Devices

F1269-13(2018) Standard Test Methods for Destructive Shear Testing of Ball Bonds

F1192-11(2018) Standard Guide for the Measurement of Single Event Phenomena (SEP) Induced by Heavy Ion Irradiation of Semiconductor Devices

F3302-18 Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion

E3124-17 Standard Test Method for Measuring System Latency Performance of Optical Tracking Systems that Measure Six Degrees of Freedom (6DOF) Pose

F448-18 Standard Test Method for Measuring Steady-State Primary Photocurrent

F3213-17 Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion

F1893-18 Guide for Measurement of Ionizing Dose-Rate Survivability and Burnout of Semiconductor Devices

F1467-18 Standard Guide for Use of an X-Ray Tester (≈10 keV Photons) in Ionizing Radiation Effects Testing of Semiconductor Devices and Microcircuits

E3125-17 Standard Test Method for Evaluating the Point-to-Point Distance Measurement Performance of Spherical Coordinate 3D Imaging Systems in the Medium Range

F1190-18 Standard Guide for Neutron Irradiation of Unbiased Electronic Components

F85-76(2018) Standard Practice for Nomenclature for Wire Leads Used as Conductors in Electron Tubes

F83-71(2018) Standard Practice for Definition and Determination of Thermionic Constants of Electron Emitters

F458-13(2018) Standard Practice for Nondestructive Pull Testing of Wire Bonds

F219-96(2018) Standard Test Methods of Testing Fine Round and Flat Wire for Electron Devices and Lamps

F204-76(2018) Standard Test Method for Surface Flaws in Tungsten Seal Rod and Wire

F996-11(2018) Standard Test Method for Separating an Ionizing Radiation-Induced MOSFET Threshold Voltage Shift Into Components Due to Oxide Trapped Holes and Interface States Using the Subthreshold Current–Voltage Characteristics

F487-13(2018) Standard Specification for Fine Aluminum–1 % Silicon Wire for Semiconductor Lead-Bonding

F459-13(2018) Standard Test Methods for Measuring Pull Strength of Microelectronic Wire Bonds

ISO/ASTM52910-18 Additive manufacturing — Design — Requirements, guidelines and recommendations

F3301-18a Standard for Additive Manufacturing – Post Processing Methods – Standard Specification for Thermal Post-Processing Metal Parts Made Via Powder Bed Fusion

F3318-18 Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam

F3192-16 Standard Specification for High-Purity Copper Sputtering Target Used for Through-Silicon Vias (TSV) Mettalization

F3166-16 Standard Specification for High-Purity Titanium Sputtering Target Used for Through-Silicon Vias (TSV) Metallization

F364-96(2019) Standard Specification for Molybdenum Flattened Wire for Electron Tubes 

F289-96(2019) Standard Specification for Molybdenum Wire and Rod for Electronic Applications

F269-60(2019) Standard Test Method for Sag of Tungsten Wire

F288-96(2019) Standard Specification for Tungsten Wire for Electron Devices and Lamps

F2725-19 Standard Guide for European Union's Registration, Evaluation, and Authorization of Chemicals (REACH) Supply Chain Information Exchange

F2187-02(2019) Standard Test Method for Determining the Effect of Random Frequency Vibration on a Membrane Switch or Membrane Switch Assembly

F2112-02(2019) Standard Terminology for Membrane Switches

F1263-11(2019) Standard Guide for Analysis of Overtest Data in Radiation Testing of Electronic Parts

F2866-11(2019) Standard Test Method for Flammability of a Membrane Switch in Defined Assembly

F2359-04(2019) Standard Test Method for Determining Color of a Membrane Switch Backlit with Diffuse Light Source

F2188-02(2019) Standard Test Method for Determining the Effect of Variable Frequency Vibration on a Membrane Switch or Membrane Switch Assembly

F2931-19a Standard Guide for Analytical Testing of Substances of Very High Concern in Materials and Products

F1396-93(2020) Standard Test Method for Determination of Oxygen Contribution by Gas Distribution System Components

F1438-93(2020) Standard Test Method for Determination of Surface Roughness by Scanning Tunneling Microscopy for Gas Distribution System Components

F1398-93(2020) Standard Test Method for Determination of Total Hydrocarbon Contribution by Gas Distribution System Components

F1397-93(2020) Standard Test Method for Determination of Moisture Contribution by Gas Distribution System Components

F1373-93(2020) Standard Test Method for Determination of Cycle Life of Automatic Valves for Gas Distribution System Components

F1376-92(2020) Standard Guide for Metallurgical Analysis for Gas Distribution System Components

F1375-92(2020) Standard Test Method for Energy Dispersive X-Ray Spectrometer (EDX) Analysis of Metallic Surface Condition for Gas Distribution System Components

F1374-92(2020) Standard Test Method for Ionic/Organic Extractables of Internal Surfaces-IC/GC/FTIR for Gas Distribution System Components

F1394-92(2020) Standard Test Method for Determination of Particle Contribution from Gas Distribution System Valves

F1372-93(2020) Standard Test Method for Scanning Electron Microscope (SEM) Analysis of Metallic Surface Condition for Gas Distribution System Components

F1094-87(2020) Standard Test Methods for Microbiological Monitoring of Water Used for Processing Electron and Microelectronic Devices by Direct Pressure Tap Sampling Valve and by the Presterilized Plastic Bag Method

F96-77(2020) Standard Specification for Electronic Grade Alloys of Copper and Nickel in Wrought Forms

F180-94(2020) Standard Test Method for Density of Fine Wire and Ribbon Wire for Electronic Devices

F205-94(2020) Standard Test Method for Measuring Diameter of Fine Wire by Weighing

F290-94(2020) Standard Specification for Round Wire for Winding Electron Tube Grid Laterals

F256-05(2020) Standard Specification for Chromium-Iron Sealing Alloys with 18 or 28 Percent Chromium

ISO/ASTM52921-13(2019) Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

F2924-14(2021) Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion

F3001-14(2021) Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) with Powder Bed Fusion

F3049-14(2021) Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

E2919-14 Standard Test Method for Evaluating the Performance of Systems that Measure Static, Six Degrees of Freedom (6DOF), Pose

F1762-14 Standard Test Method for Determining the Effects of Atmospheric Pressure Variation on a Membrane Switch

F1681-14 Standard Test Method for Determining Current Carrying Capacity of a Membrane Switch Circuit

F1895-14 Standard Test Method for Submersion of a Membrane Switch

F1578-07(2014) Standard Test Method for Contact Closure Cycling of a Membrane Switch

F1680-07a(2014) Standard Test Method for Determining Circuit Resistance of a Membrane Switch

F1598-95(2014) Standard Test Method for Determining the Effects of Chemical/Solvent Exposure to a Membrane Switch/Graphic Overlay (Spot Test Method)

F1262M-14 Standard Guide for Transient Radiation Upset Threshold Testing of Digital Integrated Circuits (Metric)

F2072-14 Standard Test Method for Hosedown of a Membrane Switch

F1689-05(2020) Standard Test Method for Determining the Insulation Resistance of a Membrane Switch

F2964-12(2020) Standard Test Method for Determining the Uniformity of the Luminance of an Electroluminescent Lamp or Other Diffuse Lighting Device

F1595-00(2020) Standard Practice for Viewing Conditions for Visual Inspection of Membrane Switches

F1995-13(2021) Standard Test Method for Determining the Shear Strength of the Bond between a Surface Mount Device (SMD) and Substrate in a Membrane Switch

F2865-13(2021) Standard Guide for Classifying the Degrees of Ingress of Dust and Water into a Membrane Switch

F1684-06(2021) Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications

F7-95(2021) Standard Specification for Aluminum Oxide Powder

F3091/F3091M-14(2021) Standard Specification for Powder Bed Fusion of Plastic Materials

F3056-14(2021) Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion

F3055-14a(2021) Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion

ISO/ASTM52930-21 Additive manufacturing — Qualification principles — Installation, operation and performance (IQ/OQ/PQ) of PBF-LB equipment

ISO/ASTM52903-1-20 Additive manufacturing — Material extrusion-based additive manufacturing of plastic materials — Part 1: Feedstock materials

F31-21 Standard Specification for Nickel-Chromium-Iron Sealing Alloys

F3413-19e1 Guide for Additive Manufacturing — Design — Directed Energy Deposition

ISO/ASTM52941-20 Additive manufacturing — System performance and reliability — Acceptance tests for laser metal powder-bed fusion machines for metallic materials for aerospace application

F3490-21 Standard Practice for Additive Manufacturing — General Principles — Overview of Data Pedigree

ISO/ASTM52900-21 Additive manufacturing — General principles — Fundamentals and vocabulary

E2544-11A(2019)e1 Standard Terminology for Three-Dimensional (3D) Imaging Systems

ISO/ASTM52925-22 Additive manufacturing of polymers — Feedstock materials — Qualification of materials for laser-based powder bed fusion of parts

F3122-14(2022) Standard Guide for Evaluating Mechanical Properties of Metal Materials Made via Additive Manufacturing Processes

F3456-22 Standard Guide for Powder Reuse Schema in Powder Bed Fusion Processes for Medical Applications for Additive Manufacturing Feedstock Materials

F15-04(2022) Standard Specification for Iron-Nickel-Cobalt Sealing Alloy

F16-12(2022) Standard Test Methods for Measuring Diameter or Thickness of Wire and Ribbon for Electronic Devices and Lamps

F18-12(2022) Standard Specification and Test Method for Evaluation of Glass-to-Metal Headers Used in Electron Devices

F29-97(2022) Standard Specification for Dumet Wire for Glass-to-Metal Seal Applications

F3530-22 Standard Guide for Additive Manufacturing — Design — Post-Processing for Metal PBF-LB

F3572-22 Standard Practice for Additive Manufacturing – General Principles – Part Classifications for Additive Manufactured Parts Used in Aviation

F3571-22 Standard Guide for Additive Manufacturing – Feedstock – Particle Shape Image Analysis by Optical Photography to Identify and Quantify the Agglomerates/Satellites in Metal Powder Feedstock

F3529-21 Guide for Additive Manufacturing — Design — Material Extrusion of Polymers

F3560-22 Standard Specification for Additive Manufacturing – Data – Common Exchange Format for Particle Size Analysis by Light Scattering

F3554-22 Standard Specification for Additive Manufacturing – Finished Part Properties – Grade 4340 (UNS G43400) via Laser Beam Powder Bed Fusion for Transportation Applications

F2577-22 Standard Guide for Compositional Evaluation of Declarable Substances and Substances of Concern for Materials in Products

E2807-11(2019)e1 Standard Specification for 3D Imaging Data Exchange, Version 1.0