D5288-21 Standard Test Method for Determining Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)

D3349-21 Standard Test Method for Absorption Coefficient of Ethylene Polymer Material Pigmented with Carbon Black

D3850-19 Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)

D8318-20 Standard Specification for Low-Density Poly (Vinylidene Fluoride) Based Material Intended for Use in Wire and Cable Jacketing

D3955-20 Standard Specification for Electrical Insulating Varnishes

D3288/D3288M-20 Standard Test Methods for Magnet-Wire Enamels

D4566-20 Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable

D2656-20 Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 2001 to 35 000 V

D4388-20 Standard Specification for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes

D4325-20 Standard Test Methods for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes

D4565-20 Standard Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable

D3145-20 Standard Test Method for Thermal Endurance of Electrical Insulating Varnishes by Helical Coil Method

D7936-20 Standard Test Method for Flammability of Electrical Insulating Materials Intended for Wires or Cables When Burning in Horizontal Configuration

D7148-19a Standard Test Method for Determining the Ionic Resistivity (ER) of Alkaline Battery Separator Using a Carbon Electrode in an Electrolyte Bath Measuring System

D7895/D7895M-19 Standard Test Method for Thermal Endurance of Coating Powders Used for Powder Coating Insulation Systems

D7894/D7894M-19 Standard Test Method for Thermal Endurance of Coating Powders Used for Integral Bus Bar Insulation Systems

D2519-19a Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test

D2903-21 Standard Specification for Crosslinked Chlorinated Polyolefin Heat-Shrinkable Tubing for Electrical Insulation

D6096-21 Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 90 °C Operation

D4245-21 Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90 °C Dry/75 °C Wet Operation

D3150-21 Standard Specification for Crosslinked and Noncrosslinked Poly(Vinyl Chloride) Heat-Shrinkable Tubing for Electrical Insulation

D2633-21 Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable

D3032-21a Standard Test Methods for Hookup Wire Insulation

D2902-21 Standard Specification for Fluoropolymer Resin Heat-Shrinkable Tubing for Electrical Insulation

D4967-21 Standard Guide for Selecting Materials to Be Used for Insulation, Jacketing, and Strength Components in Fiber-Optic Cables

D6113-21 Standard Test Method for Using Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables

D5485-21 Standard Test Method for Determining Corrosive Effect of Combustion Products Using the Cone Corrosimeter

D2520-21 Standard Test Methods for Complex Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials at Microwave Frequencies and Temperatures to 1650 °C

D2671-21 Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use

D6097-16 Standard Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials

D4881-05(2017) Standard Test Method for Thermal Endurance of Varnished Fibrous- or Film-Wrapped Magnet Wire

D5470-17 Standard Test Method for Thermal Transmission Properties of Thermally Conductive Electrical Insulation Materials

D4882-17 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test

D5637-05(2017) Standard Test Method for Moisture Resistance of Electrical Insulating Varnishes

D2756-07(2017) Standard Test Method for Weight Loss of Electrical Insulating Varnishes

D4733-17 Standard Test Methods for Solventless Electrical Insulating Varnishes

D4470-18 Standard Test Method for Static Electrification

D4935-18 Standard Test Method for Measuring the Electromagnetic Shielding Effectiveness of Planar Materials

D3312-18 Standard Test Method for Percent Reactive Monomer in Solventless Varnishes

D3376-18 Standard Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation

D4880-18 Standard Test Method for Salt Water Proofness of Insulating Varnishes Over Enamelled Magnet Wire

D5638-18 Standard Test Method for Chemical Resistance of Electrical Insulating Varnishes

D3377-04(2018) Standard Test Method for Weight Loss of Solventless Varnishes

D3756-18 Standard Test Method for Evaluation of Resistance to Electrical Breakdown by Treeing in Solid Dielectric Materials Using Diverging Fields

D6053-14(2018) Standard Test Method for Determination of Volatile Organic Compound (VOC) Content of Electrical Insulating Varnishes

D6343-14(2018) Standard Test Methods for Thin Thermally Conductive Solid Materials for Electrical Insulation and Dielectric Applications

D3251-19 Standard Test Method for Thermal Endurance Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire

D5213-19 Standard Specification for Polymeric Resin Film for Electrical Insulation and Dielectric Applications

D3426-19 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves

D5032-19 Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Glycerin Solutions

D3755-20 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Under Direct-Voltage Stress

D2686-19 Standard Specification for Polytetrafluoroethylene-Backed Pressure-Sensitive Electrical Insulating Tape

D3874-20 Standard Test Method for Ignition of Materials by Hot Wire Sources

D4872-14(2020) Standard Test Method for Dielectric Testing of Wire and Cable Filling Compounds

D4730-13(2020) Standard Specification for Flooding Compounds for Telecommunications Wire and Cable

D4568-13(2020) Standard Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds and Polyolefin Wire and Cable Materials

D4246-14(2020) Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation for Wire and Cable, 90 °C Operation

D3555-20e1 Standard Specification for Track-Resistant Crosslinked Polyethylene Insulation for Wire and Cable, 90 °C Operation

D4732-13(2020) Standard Specification for Cool-Application Filling Compounds for Telecommunications Wire and Cable

D3554-20e1 Standard Specification for Track-Resistant Thermoplastic High-Density Polyethylene Insulation for Wire and Cable, 75 °C Operation

D4731-13(2020) Standard Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable

D3004-08(2020) Standard Specification for Crosslinked and Thermoplastic Extruded Semi-Conducting, Conductor, and Insulation Shielding Materials

D8355-21 Standard Test Methods for Flammability of Electrical Insulating Materials Used for Sleeving or Tubing

D8354-21 Standard Test Method for Flammability of Electrical Insulating Materials Intended for Wires or Cables When Burning in a Vertical Configuration

D3638-21e1 Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials

D3382-22 Standard Test Methods for Measurement of Energy and Integrated Charge Transfer Due to Partial Discharges (Corona) Using Bridge Techniques

D3380-22 Standard Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Polymer-Based Microwave Circuit Substrates

D3394-16(2022) Standard Test Methods for Sampling and Testing Electrical Insulating Board

D5642-16(2022) Standard Test Method for Sealed Tube Chemical Compatibility Test

D4063-99(2022) Standard Specification for Pressboard for Electrical Insulating Purposes

D4313-22 Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorinated Polyethylene (CPE) Jackets For Wire and Cable

D4363-22 Standard Specification for Thermoplastic Chlorinated Polyethylene (CPE) Jacket for Wire and Cable

D5374-22a Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation

D5568-22a Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Waveguide

D7449/D7449M-22a Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Coaxial Air Line

D4496-21e1 Standard Test Method for D-C Resistance or Conductance of Moderately Conductive Materials

D5423-23 Standard Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation

D6194-23 Standard Test Method for Glow-Wire Ignition of Materials

D5425-23 Standard Guide for Development of Fire Hazard Assessment Standards of Electrotechnical Products

D6095-12(2023) Standard Test Method for Longitudinal Measurement of Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials

D5424-23a Standard Test Method for Smoke Obscuration of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration

D5537-23a Standard Test Method for Heat Release, Flame Spread, Smoke Obscuration, and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration

D4243-23 Standard Test Method for Measurement of Average Viscometric Degree of Polymerization of New and Aged Electrical Papers and Boards

D3144-23 Standard Specification for Crosslinked Poly(Vinylidene Fluoride) and Poly(Vinylidene Fluoride) Copolymer Heat-Shrinkable Tubing for Electrical Insulation

D2655-23 Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V, 90 °C Operation

D8436-23 Standard Specification for Fluoropolymer-based Materials for Use for Encapsulation of Downhole Cable

D3056-23 Standard Test Method for Gel Time of Solventless Varnishes

D8561-24 Standard Test Method for Gel Time of Solventless Varnishes by Plunger Method

D3005-24 Standard Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape

D3353-18(2024) Standard Test Methods for Fibrous-Insulated Magnet Wire

D3636-24 Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials