ASTM Volume 10, 2024

Table of Contents

D257-14(2021)e1 Standard Test Methods for DC Resistance or Conductance of Insulating Materials

D2149-13(2021) Standard Test Method for Permittivity (Dielectric Constant) and Dissipation Factor of Solid Dielectrics at Frequencies to 10 MHz and Temperatures to 500 °C

D5288-21 Standard Test Method for Determining Tracking Index of Electrical Insulating Materials Using Various Electrode Materials (Excluding Platinum)

D3349-21 Standard Test Method for Absorption Coefficient of Ethylene Polymer Material Pigmented with Carbon Black

D3850-19 Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)

F1466-20 Standard Specification for Iron-Nickel-Cobalt Alloys for Metal-to-Ceramic Sealing Applications

D4652-20 Standard Specification for Silicone Liquid Used for Electrical Insulation

D2225-20 Standard Test Methods for Silicone Liquids Used for Electrical Insulation

D1351-20 Standard Specification for Thermoplastic Polyethylene Insulation for Electrical Wire and Cable

D1934-20 Standard Test Method for Oxidative Aging of Electrical Insulating Liquids by Open-Beaker Method

D8318-20 Standard Specification for Low-Density Poly (Vinylidene Fluoride) Based Material Intended for Use in Wire and Cable Jacketing

D3955-20 Standard Specification for Electrical Insulating Varnishes

F1430/F1430M-20 Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Aerial Personnel Devices with Supplemental Load Handling Attachments

F914/F914M-20 Standard Test Method for Acoustic Emission for Aerial Personnel Devices Without Supplemental Load Handling Attachments

D1533-20 Standard Test Method for Water in Insulating Liquids by Coulometric Karl Fischer Titration

D3288/D3288M-20 Standard Test Methods for Magnet-Wire Enamels

D4566-20 Standard Test Methods for Electrical Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable

D2656-20 Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 2001 to 35 000 V

D4388-20 Standard Specification for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes

D4325-20 Standard Test Methods for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes

D4565-20 Standard Test Methods for Physical and Environmental Performance Properties of Insulations and Jackets for Telecommunications Wire and Cable

D3145-20 Standard Test Method for Thermal Endurance of Electrical Insulating Varnishes by Helical Coil Method

D7936-20 Standard Test Method for Flammability of Electrical Insulating Materials Intended for Wires or Cables When Burning in Horizontal Configuration

D7148-19a Standard Test Method for Determining the Ionic Resistivity (ER) of Alkaline Battery Separator Using a Carbon Electrode in an Electrolyte Bath Measuring System

D7895/D7895M-19 Standard Test Method for Thermal Endurance of Coating Powders Used for Powder Coating Insulation Systems

F3283/F3283M-18 Standard Specification for the Manufacturing of High-Voltage Proximity Alarm to be used for the Detection of Overhead High Voltage Alternating Current (AC)

D1932-19 Standard Test Method for Thermal Endurance of Flexible Electrical Insulating Varnishes

ISO/ASTM52911-1-19 Additive manufacturing — Design — Part 1: Laser-based powder bed fusion of metals

D7894/D7894M-19 Standard Test Method for Thermal Endurance of Coating Powders Used for Integral Bus Bar Insulation Systems

D1169-19a Standard Test Method for Specific Resistance (Resistivity) of Electrical Insulating Liquids

D2519-19a Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test

D350-21 Standard Test Methods for Flexible Treated Sleeving Used for Electrical Insulation

D2903-21 Standard Specification for Crosslinked Chlorinated Polyolefin Heat-Shrinkable Tubing for Electrical Insulation

D6096-21 Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 90 °C Operation

D470-21 Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable

F1826-00(2021) Standard Specification for Live Line and Measuring Telescoping Tools

D4245-21 Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation For Wire and Cable, 90 °C Dry/75 °C Wet Operation

D2220-21 Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 75 °C Operation

D3150-21 Standard Specification for Crosslinked and Noncrosslinked Poly(Vinyl Chloride) Heat-Shrinkable Tubing for Electrical Insulation

D619-21 Standard Test Methods for Vulcanized Fibre Used for Electrical Insulation

D2219-21 Standard Specification for Poly(Vinyl Chloride) Insulation for Wire and Cable, 60 °C Operation

D2633-21 Standard Test Methods for Thermoplastic Insulations and Jackets for Wire and Cable

D8086-20 Standard Test Method for Determination of Methanol and Ethanol in Electrical Insulating Liquids of Petroleum Origin by Headspace (HS)-Gas Chromatography (GC) Using Mass Spectrometry (MS) or Flame Ionization Detection (FID)

D3032-21a Standard Test Methods for Hookup Wire Insulation

F1116-21 Standard Test Method for Determining Dielectric Strength of Dielectric Footwear

D2902-21 Standard Specification for Fluoropolymer Resin Heat-Shrinkable Tubing for Electrical Insulation

D4967-21 Standard Guide for Selecting Materials to Be Used for Insulation, Jacketing, and Strength Components in Fiber-Optic Cables

D1047-21 Standard Specification for Poly(Vinyl Chloride) Jacket for Wire and Cable

D6113-21 Standard Test Method for Using Cone Calorimeter to Determine Fire-Test-Response Characteristics of Insulating Materials Contained in Electrical or Optical Fiber Cables

D5485-21 Standard Test Method for Determining Corrosive Effect of Combustion Products Using the Cone Corrosimeter

D2520-21 Standard Test Methods for Complex Permittivity (Dielectric Constant) of Solid Electrical Insulating Materials at Microwave Frequencies and Temperatures to 1650 °C

F2973-21 Standard Specification for Insulating Lifting Links for Load Lifting Equipment Working Near Energized Power Lines

ISO/ASTM52907-19 Additive manufacturing — Feedstock materials — Methods to characterize metallic powders

D876-21 Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation

D2671-21 Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use

E3064-16 Standard Test Method for Evaluating the Performance of Optical Tracking Systems that Measure Six Degrees of Freedom (6DOF) Pose

F2971-13(2021) Standard Practice for Reporting Data for Test Specimens Prepared by Additive Manufacturing

D6097-16 Standard Test Method for Relative Resistance to Vented Water-Tree Growth in Solid Dielectric Insulating Materials

D2129-17 Standard Test Method for Color of Clear Electrical Insulating Liquids (Platinum-Cobalt Scale)

D1933-03(2017) Standard Specification for Nitrogen Gas as an Electrical Insulating Material

D1903-08(2017) Standard Practice for Determining the Coefficient of Thermal Expansion of Electrical Insulating Liquids of Petroleum Origin, and Askarels

D2300-08(2017) Standard Test Method for Gassing of Electrical Insulating Liquids Under Electrical Stress and Ionization (Modified Pirelli Method)

D2029-97(2017) Standard Test Methods for Water Vapor Content of Electrical Insulating Gases by Measurement of Dew Point

E2641-09(2017) Standard Practice for Best Practices for Safe Application of 3D Imaging Technology

D709-17 Standard Specification for Laminated Thermosetting Materials

D1534-95(2017) Standard Test Method for Approximate Acidity in Electrical Insulating Liquids by Color-Indicator Titration

ISO/ASTM52901-16 Standard Guide for Additive Manufacturing – General Principles – Requirements for Purchased AM Parts

F30-96(2017) Standard Specification for Iron-Nickel Sealing Alloys

D1000-17 Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications

D2307-21 Standard Test Method for Thermal Endurance of Film-Insulated Round Magnet Wire

D4881-05(2017) Standard Test Method for Thermal Endurance of Varnished Fibrous- or Film-Wrapped Magnet Wire

ISO/ASTM52903-2-20 Additive manufacturing — Material extrusion-based additive manufacturing of plastic materials — Part 2: Process equipment

ISO/ASTM52942-20 Additive manufacturing — Qualification principles — Qualifying machine operators of laser metal powder bed fusion machines and equipment used in aerospace applications

ISO/ASTM52950-21 Additive manufacturing — General principles — Overview of data processing

ISO/ASTM52915-20 Specification for additive manufacturing file format (AMF) Version 1.2

ISO/ASTM52904-19 Additive Manufacturing – Process Characteristics and Performance: Practice for Metal Powder Bed Fusion Process to Meet Critical Applications

D5470-17 Standard Test Method for Thermal Transmission Properties of Thermally Conductive Electrical Insulation Materials

D4882-17 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Twisted-Coil Test

D5637-05(2017) Standard Test Method for Moisture Resistance of Electrical Insulating Varnishes

D2756-07(2017) Standard Test Method for Weight Loss of Electrical Insulating Varnishes

D4733-17 Standard Test Methods for Solventless Electrical Insulating Varnishes

D2759-00(2017) Standard Practice for Sampling Gas from a Transformer Under Positive Pressure

F2980-13(2017) Standard Test Method for Analysis of Heavy Metals in Glass by Field Portable X-Ray Fluorescence (XRF)

D3612-02(2017) Standard Test Method for Analysis of Gases Dissolved in Electrical Insulating Oil by Gas Chromatography

D952-15(2021) Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials

D1676-17 Standard Test Methods for Film-Insulated Magnet Wire

D3487-16e1 Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus

D748-18 Standard Specification for Natural Block Mica and Mica Films Suitable for Use in Fixed Mica-Dielectric Capacitors

F3302-18 Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Titanium Alloys via Powder Bed Fusion

D4470-18 Standard Test Method for Static Electrification

E3124-17 Standard Test Method for Measuring System Latency Performance of Optical Tracking Systems that Measure Six Degrees of Freedom (6DOF) Pose

F3213-17 Standard for Additive Manufacturing – Finished Part Properties – Standard Specification for Cobalt-28 Chromium-6 Molybdenum via Powder Bed Fusion

E3125-17 Standard Test Method for Evaluating the Point-to-Point Distance Measurement Performance of Spherical Coordinate 3D Imaging Systems in the Medium Range

F712-06(2018) Standard Test Methods and Specifications for Electrically Insulating Plastic Guard Equipment for Protection of Workers

D4935-18 Standard Test Method for Measuring the Electromagnetic Shielding Effectiveness of Planar Materials

D1675-18 Standard Test Methods for Polytetrafluoroethylene Tubing

F3272-18 Standard Guide for Selection, Care, and Use of Arc Protective Blankets

ISO/ASTM52910-18 Additive manufacturing — Design — Requirements, guidelines and recommendations

D2305-18 Standard Test Methods for Polymeric Films Used for Electrical Insulation

F3301-18a Standard for Additive Manufacturing – Post Processing Methods – Standard Specification for Thermal Post-Processing Metal Parts Made Via Powder Bed Fusion

F3318-18 Standard for Additive Manufacturing – Finished Part Properties – Specification for AlSi10Mg with Powder Bed Fusion – Laser Beam

F1701-12(2018) Standard Specification for Unused Rope with Special Electrical Properties

D351-18 Standard Classification for Natural Muscovite Block Mica and Thins Based on Visual Quality

D3312-18 Standard Test Method for Percent Reactive Monomer in Solventless Varnishes

D3376-18 Standard Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation

D4880-18 Standard Test Method for Salt Water Proofness of Insulating Varnishes Over Enamelled Magnet Wire

D5638-18 Standard Test Method for Chemical Resistance of Electrical Insulating Varnishes

D3377-04(2018) Standard Test Method for Weight Loss of Solventless Varnishes

D3756-18 Standard Test Method for Evaluation of Resistance to Electrical Breakdown by Treeing in Solid Dielectric Materials Using Diverging Fields

D6053-14(2018) Standard Test Method for Determination of Volatile Organic Compound (VOC) Content of Electrical Insulating Varnishes

D6343-14(2018) Standard Test Methods for Thin Thermally Conductive Solid Materials for Electrical Insulation and Dielectric Applications

D4059-00(2018) Standard Test Method for Analysis of Polychlorinated Biphenyls in Insulating Liquids by Gas Chromatography

D3251-19 Standard Test Method for Thermal Endurance Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire

F1891-19 Standard Specification for Arc and Flame Resistant Rainwear

D5213-19 Standard Specification for Polymeric Resin Film for Electrical Insulation and Dielectric Applications

D3426-19 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Using Impulse Waves

D5032-19 Standard Practice for Maintaining Constant Relative Humidity by Means of Aqueous Glycerin Solutions

D3636-19 Standard Practice for Sampling and Judging Quality of Solid Electrical Insulating Materials

F696-06(2019) Standard Specification for Leather Protectors for Rubber Insulating Gloves and Mittens

F2725-19 Standard Guide for European Union's Registration, Evaluation, and Authorization of Chemicals (REACH) Supply Chain Information Exchange

F2939-13(2019)e1 Standard Specification for High Voltage Phasing Testers

F1117-03(2019) Standard Specification for Dielectric Footwear

F1796-19 Standard Specification for High Voltage Detectors—Part 1 Capacitive Type to be Used for Voltages Exceeding 600 Volts AC

D69-19 Standard Test Methods for Friction Tapes

D229-19e1 Standard Test Methods for Rigid Sheet and Plate Materials Used for Electrical Insulation

F1825-03(2019) Standard Specification for Clampstick Type Live Line Tools

D2685-11(2019) Standard Test Method for Air and Carbon Tetrafluoride in Sulfur Hexafluoride by Gas Chromatography

D1816-12(2019) Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using VDE Electrodes

D710-19 Standard Specification for Vulcanized Fibre Sheets, Rolls, Rods, and Tubes Used for Electrical Insulation

D877/D877M-19 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes

D3284-05(2019) Standard Practice for Combustible Gases in the Gas Space of Electrical Apparatus Using Portable Meters

D2284-11(2019) Standard Test Method for Acidity of Sulfur Hexafluoride

D4768-11(2019) Standard Test Method for Analysis of 2,6-Ditertiary-Butyl Para-Cresol and 2,6-Ditertiary-Butyl Phenol in Insulating Liquids by Gas Chromatography

D149-20 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies

D3755-20 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Under Direct-Voltage Stress

F2931-19a Standard Guide for Analytical Testing of Substances of Very High Concern in Materials and Products

F1564-13(2019)e1 Standard Specification for Structure-Mounted Insulating Work Platforms for Electrical Workers

F1742-03(2020) Standard Specification for PVC Insulating Sheeting

D2686-19 Standard Specification for Polytetrafluoroethylene-Backed Pressure-Sensitive Electrical Insulating Tape

D1868-20 Standard Test Method for Detection and Measurement of Partial Discharge (Corona) Pulses in Evaluation of Insulation Systems

D3874-20 Standard Test Method for Ignition of Materials by Hot Wire Sources

D971-20 Standard Test Method for Interfacial Tension of Insulating Liquids Against Water by the Ring Method

ISO/ASTM52921-13(2019) Standard Terminology for Additive Manufacturing—Coordinate Systems and Test Methodologies

F2924-14(2021) Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium with Powder Bed Fusion

F1505-16(2021) Standard Specification for Insulated and Insulating Hand Tools

F3001-14(2021) Standard Specification for Additive Manufacturing Titanium-6 Aluminum-4 Vanadium ELI (Extra Low Interstitial) with Powder Bed Fusion

F3049-14(2021) Standard Guide for Characterizing Properties of Metal Powders Used for Additive Manufacturing Processes

D6871-17 Standard Specification for Natural (Vegetable Oil) Ester Fluids Used in Electrical Apparatus

D4872-14(2020) Standard Test Method for Dielectric Testing of Wire and Cable Filling Compounds

D4730-13(2020) Standard Specification for Flooding Compounds for Telecommunications Wire and Cable

D4568-13(2020) Standard Test Methods for Evaluating Compatibility Between Cable Filling and Flooding Compounds and Polyolefin Wire and Cable Materials

D4246-14(2020) Standard Specification for Ozone-Resistant Thermoplastic Elastomer Insulation for Wire and Cable, 90 °C Operation

D3555-20e1 Standard Specification for Track-Resistant Crosslinked Polyethylene Insulation for Wire and Cable, 90 °C Operation

D4732-13(2020) Standard Specification for Cool-Application Filling Compounds for Telecommunications Wire and Cable

D3554-20e1 Standard Specification for Track-Resistant Thermoplastic High-Density Polyethylene Insulation for Wire and Cable, 75 °C Operation

D4731-13(2020) Standard Specification for Hot-Application Filling Compounds for Telecommunications Wire and Cable

D3004-08(2020) Standard Specification for Crosslinked and Thermoplastic Extruded Semi-Conducting, Conductor, and Insulation Shielding Materials

D2308-07(2020)e1 Standard Specification for Thermoplastic Polyethylene Jacket for Electrical Wire and Cable

D2779-92(2020) Standard Test Method for Estimation of Solubility of Gases in Petroleum Liquids

D5282-05(2020) Standard Test Methods for Compatibility of Construction Material with Silicone Fluid Used for Electrical Insulation

D3827-92(2020) Standard Test Method for Estimation of Solubility of Gases in Petroleum and Other Organic Liquids

D2477-07(2020) Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Insulating Gases at Commercial Power Frequencies

D831/D831M-12(2020) Standard Test Method for Gas Content of Cable and Capacitor Oils

D3283-98(2020) Standard Specification for Air as an Electrical Insulating Material

D3300-20 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Under Impulse Conditions

D3455-11(2019) Standard Test Methods for Compatibility of Construction Material with Electrical Insulating Oil of Petroleum Origin

D7150-13(2020) Standard Test Method for the Determination of Gassing Characteristics of Insulating Liquids Under Thermal Stress

F1684-06(2021) Standard Specification for Iron-Nickel and Iron-Nickel-Cobalt Alloys for Low Thermal Expansion Applications

D8355-21 Standard Test Methods for Flammability of Electrical Insulating Materials Used for Sleeving or Tubing

D8354-21 Standard Test Method for Flammability of Electrical Insulating Materials Intended for Wires or Cables When Burning in a Vertical Configuration

D2303-20e1 Standard Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials

F3091/F3091M-14(2021) Standard Specification for Powder Bed Fusion of Plastic Materials

F3056-14(2021) Standard Specification for Additive Manufacturing Nickel Alloy (UNS N06625) with Powder Bed Fusion

F3055-14a(2021) Standard Specification for Additive Manufacturing Nickel Alloy (UNS N07718) with Powder Bed Fusion

ISO/ASTM52930-21 Additive manufacturing — Qualification principles — Installation, operation and performance (IQ/OQ/PQ) of PBF-LB equipment

ISO/ASTM52903-1-20 Additive manufacturing — Material extrusion-based additive manufacturing of plastic materials — Part 1: Feedstock materials

F31-21 Standard Specification for Nickel-Chromium-Iron Sealing Alloys

D2440-13(2021) Standard Test Method for Oxidation Stability of Mineral Insulating Oil

D2864-21a Standard Terminology Relating to Electrical Insulating Liquids and Gases

D2144-07(2021) Standard Practices for Examination of Electrical Insulating Oils by Infrared Absorption

D3635-13(2021) Standard Test Method for Dissolved Copper In Electrical Insulating Oil By Atomic Absorption Spectrophotometry

D2668-07(2021) Standard Test Method for 2,6-di-tert-Butyl- p-Cresol and 2,6-di-tert-Butyl Phenol in Electrical Insulating Oil by Infrared Absorption

F3413-19e1 Guide for Additive Manufacturing — Design — Directed Energy Deposition

D495-22 Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation

D3638-21e1 Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials

D3382-22 Standard Test Methods for Measurement of Energy and Integrated Charge Transfer Due to Partial Discharges (Corona) Using Bridge Techniques

ISO/ASTM52941-20 Additive manufacturing — System performance and reliability — Acceptance tests for laser metal powder-bed fusion machines for metallic materials for aerospace application

F3490-21 Standard Practice for Additive Manufacturing — General Principles — Overview of Data Pedigree

ISO/ASTM52900-21 Additive manufacturing — General principles — Fundamentals and vocabulary

D120-22 Standard Specification for Rubber Insulating Gloves

D1050-05(2022) Standard Specification for Rubber Insulating Line Hose

F479-06(2022) Standard Specification for In-Service Care of Insulating Blankets

D2275-22 Standard Test Method for Voltage Endurance of Solid Electrical Insulating Materials Subjected to Partial Discharges (Corona) on the Surface

D3380-22 Standard Test Method for Relative Permittivity (Dielectric Constant) and Dissipation Factor of Polymer-Based Microwave Circuit Substrates

ISO/ASTM52925-22 Additive manufacturing of polymers — Feedstock materials — Qualification of materials for laser-based powder bed fusion of parts

F1506-22 Standard Performance Specification for Flame Resistant and Electric Arc Rated Protective Clothing Worn by Workers Exposed to Flames and Electric Arcs

F2621/F2621M-22 Standard Practice for Evaluating Response Characteristics of Safety Products in an Electric Arc Exposure

F3456-22 Standard Guide for Powder Reuse Schema in Powder Bed Fusion Processes for Medical Applications for Additive Manufacturing Feedstock Materials

D982-16(2022) Standard Test Method for Organic Nitrogen in Paper and Paperboard

D1039-16(2022) Standard Test Methods for Glass-Bonded Mica Used as Electrical Insulation

D1305-16(2022) Standard Specification for Electrical Insulating Paper and Paperboard—Sulfate (Kraft) Layer Type

D2131-22 Standard Classification for Natural Muscovite Mica Splittings

D2413-16(2022) Standard Practice for Preparation of Insulating Paper and Board Impregnated with a Liquid Dielectric

D3394-16(2022) Standard Test Methods for Sampling and Testing Electrical Insulating Board

D5642-16(2022) Standard Test Method for Sealed Tube Chemical Compatibility Test

D4063-99(2022) Standard Specification for Pressboard for Electrical Insulating Purposes

F15-04(2022) Standard Specification for Iron-Nickel-Cobalt Sealing Alloy

F29-97(2022) Standard Specification for Dumet Wire for Glass-to-Metal Seal Applications

D828-22 Standard Test Method for Tensile Properties of Paper and Paperboard Using Constant-Rate-of-Elongation Apparatus

D117-22 Standard Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Liquids

D4313-22 Standard Specification for General-Purpose, Heavy-Duty, and Extra-Heavy-Duty Crosslinked Chlorinated Polyethylene (CPE) Jackets For Wire and Cable

D4363-22 Standard Specification for Thermoplastic Chlorinated Polyethylene (CPE) Jacket for Wire and Cable

D1049-98(2022) Standard Specification for Rubber Insulating Covers

F3530-22 Standard Guide for Additive Manufacturing — Design — Post-Processing for Metal PBF-LB

D1524-15(2022) Standard Test Method for Visual Examination of Used Electrical Insulating Liquids in the Field

F3572-22 Standard Practice for Additive Manufacturing – General Principles – Part Classifications for Additive Manufactured Parts Used in Aviation

F3571-22 Standard Guide for Additive Manufacturing – Feedstock – Particle Shape Image Analysis by Optical Photography to Identify and Quantify the Agglomerates/Satellites in Metal Powder Feedstock

F3529-21 Guide for Additive Manufacturing — Design — Material Extrusion of Polymers

F1797-18(2022) Standard Test Method for Acoustic Emission Testing of Insulated and Non-Insulated Digger Derricks

D5374-22a Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation

D5568-22a Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Waveguide

D7449/D7449M-22a Standard Test Method for Measuring Relative Complex Permittivity and Relative Magnetic Permeability of Solid Materials at Microwave Frequencies Using Coaxial Air Line

D150-22 Standard Test Methods for AC Loss Characteristics and Permittivity (Dielectric Constant) of Solid Electrical Insulation

F3560-22 Standard Specification for Additive Manufacturing – Data – Common Exchange Format for Particle Size Analysis by Light Scattering

D2148-22 Standard Test Methods for Bondable Silicone Rubber Tapes Used for Electrical Insulation

F3554-22 Standard Specification for Additive Manufacturing – Finished Part Properties – Grade 4340 (UNS G43400) via Laser Beam Powder Bed Fusion for Transportation Applications

F2577-22 Standard Guide for Compositional Evaluation of Declarable Substances and Substances of Concern for Materials in Products

D8240-22e1 Standard Specification for Less-Flammable Synthetic Ester Liquids Used in Electrical Apparatus

E2807-11(2019)e1 Standard Specification for 3D Imaging Data Exchange, Version 1.0

F2522-12(2022) Standard Test Method for Determining the Protective Performance of a Shield Attached on Live Line Tools or on Racking Rods for Electric Arc Hazards

F3121/F3121M-17(2022) Standard Guide for In-Service Inspection, Maintenance, and Electrical Testing of Hand-Held Live-Line Insulating Tools (Fiberglass-Reinforced Plastic (FRP))

D4496-21e1 Standard Test Method for D-C Resistance or Conductance of Moderately Conductive Materials

F3606-22 Standard Guide for Additive Manufacturing — Feedstock Materials — Testing Moisture Content in Powder Feedstock

F711-17(2022) Standard Specification for Fiberglass-Reinforced Plastic (FRP) Rod and Tube Used in Live Line Tools 

F2320-18(2022) Standard Specification for Rubber Insulating Sheeting

F3522-22 Standard Guide for Additive Manufacturing of Metals — Feedstock Materials — Assessment of Powder Spreadability

D178-22 Standard Specification for Rubber Insulating Matting

D8180-23 Standard Specification for Rerefined Mineral Insulating Liquid Used in Electrical Apparatus

F2676/F2676M-22 Standard Specification for Arc Protective Blankets

D5423-23 Standard Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation

D6194-23 Standard Test Method for Glow-Wire Ignition of Materials

D922-23 Standard Specification for Nonrigid Vinyl Chloride Polymer Tubing

D5425-23 Standard Guide for Development of Fire Hazard Assessment Standards of Electrotechnical Products

E2919-22 Standard Test Method for Evaluating the Performance of Systems that Measure Static, Six Degrees of Freedom (6DOF), Pose

F855-23 Standard Specifications for Temporary Protective Grounds to Be Used on De-energized Electric Power Lines and Equipment

D5222-23 Standard Specification for Less Flammable High Molecular Weight Hydrocarbon Mineral Electrical Insulating Liquids

F2321-23 Standard Specification for Flexible and Rigid Insulated Temporary By-Pass Jumpers

ISO/ASTM52911-2-19 Additive manufacturing — Design — Part 2: Laser-based powder bed fusion of polymers

F3605-23 Standard Guide for Additive Manufacturing of Metals — Data — File Structure for In-Process Monitoring of Powder Bed Fusion (PBF)

ISO/ASTM52911-3-23 Additive manufacturing — Design — Part 3: PBF-EB of metallic materials

F3624-23 Standard Guide for Additive Manufacturing of Metals – Powder Bed Fusion – Measurement and Characterization of Surface Texture

F3626-23 Standard Guide for Additive Manufacturing — Test Artifacts — Accelerated Build Quality Assurance for Laser Beam Powder Bed Fusion (PBF-LB)

D6095-12(2023) Standard Test Method for Longitudinal Measurement of Volume Resistivity for Extruded Crosslinked and Thermoplastic Semiconducting Conductor and Insulation Shielding Materials

D5424-23a Standard Test Method for Smoke Obscuration of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration

D5537-23a Standard Test Method for Heat Release, Flame Spread, Smoke Obscuration, and Mass Loss Testing of Insulating Materials Contained in Electrical or Optical Fiber Cables When Burning in a Vertical Cable Tray Configuration

D202-23 Standard Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation

D4243-23 Standard Test Method for Measurement of Average Viscometric Degree of Polymerization of New and Aged Electrical Papers and Boards

F1236-23 Standard Guide for Visual Inspection of Electrical Protective Rubber Products

F819-23 Standard Terminology Relating to Electrical Protective Equipment for Workers

D3144-23 Standard Specification for Crosslinked Poly(Vinylidene Fluoride) and Poly(Vinylidene Fluoride) Copolymer Heat-Shrinkable Tubing for Electrical Insulation

D2304-23 Standard Test Method for Thermal Endurance of Rigid Electrical Insulating Materials

F2174-02(2023) Standard Practice for Verifying Acoustic Emission Sensor Response

F3489-23 Standard Guide for Additive Manufacturing of Polymers — Material Extrusion — Recommendation for Material Handling and Evaluation of Static Mechanical Properties

F3637-23 Standard Guide for Additive Manufacturing of Metal — Finished Part Properties — Methods for Relative Density Measurement

D352-23 Standard Test Methods for Pasted Mica Used in Electrical Insulation

ISO/ASTM52920-23 Additive manufacturing — Qualification principles — Requirements for industrial additive manufacturing processes and production sites

D2655-23 Standard Specification for Crosslinked Polyethylene Insulation for Wire and Cable Rated 0 to 2000 V, 90 °C Operation

F3592-23 Standard Guide for Additive Manufacturing of Metals – Powder Bed Fusion – Guidelines for Feedstock Re-use and Sampling Strategies

F3615-23 Standard Practice for Additive Manufacturing — Powder Bed Fusion — Condition-Defined Maintenance for Optical Systems

D2132-23 Standard Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials

D8436-23 Standard Specification for Fluoropolymer-based Materials for Use for Encapsulation of Downhole Cable

F2178/F2178M-23a Standard Specification for Arc Rated Eye or Face Protective Products

F2675/F2675M-23 Standard Test Method for Determining Arc Ratings of Hand Protective Products Developed and Used for Electrical Arc Flash Protection

F3607-22 Standard Specification for Additive Manufacturing – Finished Part Properties – Maraging Steel via Powder Bed Fusion

F478-14a(2023) Standard Specification for In-Service Care of Insulating Line Hose and Covers

D374/D374M-23 Standard Test Methods for Thickness of Solid Electrical Insulation

ISO/ASTM52902-23 Additive manufacturing — Test artefacts — Geometric capability assessment of additive manufacturing systems

D3056-23 Standard Test Method for Gel Time of Solventless Varnishes

F2617-15(2023) Standard Test Method for Identification and Quantification of Chromium, Bromine, Cadmium, Mercury, and Lead in Polymeric Material Using Energy Dispersive X-ray Spectrometry

F2853-10(2023) Standard Test Method for Determination of Lead in Paint Layers and Similar Coatings or in Substrates and Homogenous Materials by Energy Dispersive X-Ray Fluorescence Spectrometry Using Multiple Monochromatic Excitation Beams

F3078-15(2023) Standard Test Method for Identification and Quantification of Lead in Paint and Similar Coating Materials using Energy Dispersive X-ray Fluorescence Spectrometry (EDXRF)

F3139-15(2023) Standard Test Method for Analysis of Tin-Based Solder Alloys for Minor and Trace Elements Using Inductively Coupled Plasma Atomic Emission Spectrometry

ISO/ASTM52935-23 Additive manufacturing of metals — Qualification principles — Qualification of coordination personnel

F887-23 Standard Specifications for Personal Climbing Equipment

D924-23 Standard Test Method for Dissipation Factor (or Power Factor) and Relative Permittivity (Dielectric Constant) of Electrical Insulating Liquids

D923-15(2023) Standard Practices for Sampling Electrical Insulating Liquids

D1051-23 Standard Specification for Rubber Insulating Sleeves

D2112-15(2023) Standard Test Method for Oxidation Stability of Inhibited Mineral Insulating Oil by Pressure Vessel

D2472-15(2023) Standard Specification for Sulfur Hexafluoride

F496-23 Standard Specification for In-Service Care of Insulating Gloves and Sleeves

E2938-15(2023) Standard Test Method for Evaluating the Relative-Range Measurement Performance of 3D Imaging Systems in the Medium Range

F3635-23 Standard Specification for Additive Manufacturing – Finished Part Properties – Standard Specification for Niobium-Hafnium Alloy UNS R04295 via Laser Beam Powder Bed Fusion for Spaceflight Applications

ISO/ASTM52939-23 Additive manufacturing for construction — Qualification principles — Structural and infrastructure elements

D5837-15(2023) Standard Test Method for Furanic Compounds in Electrical Insulating Liquids by High-Performance Liquid Chromatography (HPLC)

D6786-15(2023) Standard Test Method for Particle Count in Mineral Insulating Oil Using Automatic Optical Particle Counters

D7151-15(2023) Standard Test Method for Determination of Elements in Insulating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

F3258-23 Standard Specification for Protectors for Rubber Insulating Gloves Meeting Specific Performance Requirements

F2249-24 Standard Specification for In-Service Test Methods for Temporary Grounding Jumper Assemblies Used on De-Energized Electric Power Lines and Equipment

D2140-23e1 Standard Practice for Calculating Carbon-Type Composition of Insulating Oils of Petroleum Origin

F3184-16(2023) Standard Specification for Additive Manufacturing Stainless Steel Alloy (UNS S31603) with Powder Bed Fusion

F3187-16(2023) Standard Guide for Directed Energy Deposition of Metals

F3604-23 Standard Practice for Validating the Additive Manufacturing (AM) Production Process for Medical Devices Produced Using Laser Powder Bed Fusion

F3674-24 Standard Practice for Additive Manufacturing – Part Grades for Automotive

F2677-08a(2024) Standard Specification for Electrically Insulating Aprons

D1275-24 Standard Test Method for Corrosive Sulfur in Electrical Insulating Liquids

E2544-24 Standard Terminology for Three-Dimensional (3D) Imaging Systems

F3682-24 Standard Terminology for Goods Movement Process (GMP) Precise Foundational Definitions

D1048-24 Standard Specification for Rubber Insulating Blankets

ISO/ASTM52945-23 Additive manufacturing for automotive — Qualification principles — Generic machine evaluation and specification of key performance indicators for PBF-LB/M processes

ISO/ASTM52926-1-23 Additive manufacturing of metals — Qualification principles — Part 1: General qualification of operators

ISO/ASTM52926-4-23 Additive manufacturing of metals — Qualification principles — Part 4: Qualification of operators for DED-LB

ISO/ASTM52926-3-23 Additive manufacturing of metals — Qualification principles — Part 3: Qualification of operators for PBF-EB

ISO/ASTM52926-2-23 Additive manufacturing of metals — Qualification principles — Part 2: Qualification of operators for PBF-LB

ISO/ASTM52908-23 Additive manufacturing of metals — Finished part properties — Post-processing, inspection and testing of parts produced by powder bed fusion

D8561-24 Standard Test Method for Gel Time of Solventless Varnishes by Plunger Method

D3005-24 Standard Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape

D2301-24 Standard Specification for Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape

D1711-24 Standard Terminology Relating to Electrical Insulation

F2715-19(2024) Standard Specification for Temporary Protective Equipotential Bond Mat To Be Used on De-Energized Equipment

F1959/F1959M-24a Standard Test Method for Determining the Arc Rating of Materials for Clothing

D689-17(2024) Standard Test Method for Internal Tearing Resistance of Paper

D115-17(2024) Standard Test Methods for Testing Solvent Containing Varnishes Used for Electrical Insulation

D1082-17(2024) Standard Test Method for Dissipation Factor and Permittivity (Dielectric Constant) of Mica

D1677-17(2024) Standard Test Methods for Sampling and Testing Untreated Mica Paper Used for Electrical Insulation

D1830-17(2024) Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method

D3353-18(2024) Standard Test Methods for Fibrous-Insulated Magnet Wire

ISO/ASTM52933-24 Additive manufacturing — Environment, health and safety — Test method for the hazardous substances emitted from material extrusion type 3D printers in the non-industrial places

ISO/ASTM52927-24 Additive manufacturing — General principles — Main characteristics and corresponding test methods

ISO/ASTM52943-2-24 Additive manufacturing for aerospace — Process characteristics and performance — Part 2: Directed energy deposition using wire and arc