ASTM Volume 1, 2022

Table of Contents

A447/A447M-11(2021) Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service

A961/A961M-21 Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications

F3284-18 Standard Guide for Recording and Reporting of Injuries and Illnesses for the Maritime Industry

A899-91(2021) Standard Specification for Steel Wire, Epoxy-Coated

A1023/A1023M-21 Standard Specification for Carbon Steel Wire Ropes for General Purposes

A973/A973M-21 Standard Specification for Grade 100 Alloy Steel Chain

F835-20 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws

F3319-20 Standard Specification for Selection and Application of Field-Installed Cryogenic Pipe and Equipment Insulation Systems on Liquefied Natural Gas (LNG)-Fueled Ships

A451/A451M-20 Standard Specification for Centrifugally Cast Austenitic Steel Pipe for High-Temperature Service

F680-20 Standard Test Methods for Nails

A1039/A1039M-20 Standard Specification for Steel, Sheet, Hot Rolled, Carbon, Commercial, Structural, and High-Strength Low-Alloy, and Ultra-High Strength, Produced by Twin-Roll Casting Process

A703/A703M-20a Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts

A255-20a Standard Test Methods for Determining Hardenability of Steel

F844-19 Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use

A780/A780M-20 Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings

A20/A20M-20 Standard Specification for General Requirements for Steel Plates for Pressure Vessels

A1094/A1094M-20 Standard Specification for Continuous Hot-Dip Galvanized Steel Bars for Concrete Reinforcement

A510/A510M-20 Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel

A1018/A1018M-18 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength

A531/A531M-18 Standard Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings

A1069/A1069M-19 Standard Specification for Laser and Laser Hybrid Welded Stainless Steel Bars, Plates, and Shapes

F3312/F3312M-18 Standard Practice for Liquefied Natural Gas (LNG) Bunkering Hose Transfer Assembly

A691/A691M-19 Standard Specification for Carbon and Alloy Steel Pipe, Electric-Fusion-Welded for High-Pressure Service at High Temperatures

A866-18 Standard Specification for Medium Carbon Anti-Friction Bearing Steel

F985-18 Standard Specification for Pilot Platform

A913/A913M-19 Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST)

A230/A230M-19 Standard Specification for Steel Wire, Carbon Valve Spring Quality

A1059/A1059M-18 Standard Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products

A905-19 Standard Specification for Steel Wire, Pressure Vessel Winding

A762/A762M-19 Standard Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains

A987/A987M-19 Standard Practice for Measuring Shape Characteristics of Tin Mill Products

A980/A980M-19 Standard Specification for Steel, Sheet, Carbon, Ultra High Strength Cold Rolled

A632-19 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing (Small-Diameter) for General Service

A853-19 Standard Specification for Steel Wire, Carbon, for General Use

A710/A710M-19 Standard Specification for Precipitation–Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium (Niobium) Alloy Structural Steel Plates

A1080/A1080M-19 Standard Practice for Hot Isostatic Pressing of Steel, Stainless Steel, and Related Alloy Castings

A512-18 Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing

A291/A291M-19 Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears

A878/A878M-19 Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality

A542/A542M-19 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium

A358/A358M-19 Standard Specification for Electric-Fusion-Welded Austenitic Chromium-Nickel Stainless Steel Pipe for High-Temperature Service and General Applications

A672/A672M-19 Standard Specification for Electric-Fusion-Welded Steel Pipe for High-Pressure Service at Moderate Temperatures

A1115/A1115M-19 Standard Practice for Construction of Mechanically Stabilized Earth Walls with Inextensible Soil Reinforcement

F2363/F2363M-17 Standard Specification for Sewage and Graywater Flow Through Treatment Systems

F3459-21 Standard Specification for Rigid Poly Vinyl Chloride (PVC) Exterior Profiles Used for Sound Walls

A413/A413M-21 Standard Specification for Carbon Steel Chain

A105/A105M-21 Standard Specification for Carbon Steel Forgings for Piping Applications

A391/A391M-21 Standard Specification for Grade 80 Alloy Steel Chain

F1510-21 Standard Specification for Rotary Positive Displacement Pumps, Ships Use

F1554-20 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength

A336/A336M-21 Standard Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts

F606/F606M-21 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets

A660/A660M-21 Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service

A911/A911M-21 Standard Specification for Low-Relaxation Steel Bars for Prestressed Concrete Railroad Ties

A821/A821M-21 Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Tanks

F1000-21 Standard Practice for Piping System Drawing Symbols

A781/A781M-21 Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use

D3963/D3963M-21 Standard Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars

A487/A487M-21 Standard Specification for Steel Castings Suitable for Pressure Service

A356/A356M-21 Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines

A1087/A1087M-21 Standard Practice for Using Hand Calipers to Measure the Width of Steel Sheet

A239-21 Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles

A754/A754M-21 Standard Test Method for Coating Weight [Mass] of Metallic Coatings on Steel by X-Ray Fluorescence

A1030/A1030M-21 Standard Practice for Measuring Flatness Characteristics of Steel Sheet Products

A975-21 Standard Specification for Double-Twisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic-Coated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)

F1273-21 Standard Specification for Tank Vent Flame Arresters

A1073/A1073M-21 Standard Practice for Using Hand Micrometers to Measure the Thickness of Uncoated Steel Sheet and Nonmetallic and Metallic-Coated Steel Sheet

A1091/A1091M-21 Standard Specification for Steel Castings, Creep-Strength Enhanced Ferritic Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service

A266/A266M-21 Standard Specification for Carbon Steel Forgings for Pressure Vessel Components

F1321-21 Standard Guide for Conducting a Stability Test (Lightweight Survey and Inclining Experiment) to Determine the Light Ship Displacement and Centers of Gravity of a Vessel

A90/A90M-21 Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings

A428/A428M-21 Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles

R0033 ASME B36.10M-2004 Welded and Seamless Wrought Steel Pipe

R0036 Stainless Steel Pipe (This is not an ASTM standard; available as PDF only)

F3386/F3386M-21 Standard Specification for Detonation Flame Arresters

A985/A985M-21 Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts

A957/A957M-21 Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use

A872/A872M-21 Standard Specification for Centrifugally Cast Ferritic/Austenitic Stainless Steel Pipe for Corrosive Environments

A666-15 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar

F2814-09(2015) Standard Guide for Design and Construction of Ornamental Steel Picket Fence Systems for Security Purposes

F2611-15 Standard Guide for Design and Construction of Chain Link Security Fencing

A1034/A1034M-10a(2015) Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars

F1322-15 Standard Guide for Selection of Shipboard Incinerators

C1460-21 Standard Specification for Shielded Transition Couplings for Use with Dissimilar DWV Pipe and Fittings Above Ground

A947M-16 Standard Specification for Textured Stainless Steel Sheet [Metric]

A493-16 Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging

A74-21 Standard Specification for Cast Iron Soil Pipe and Fittings

F2408-16 Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets

A796/A796M-21 Standard Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications

A135/A135M-21 Standard Specification for Electric-Resistance-Welded Steel Pipe

A533/A533M-16 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel

A1118-21 Standard Index of Specifications for Cast Iron Soil Pipe and Fittings

A743/A743M-21 Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application

A554-21 Standard Specification for Welded Stainless Steel Mechanical Tubing

A795/A795M-21 Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use

A524/A524M-21 Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures

A352/A352M-21 Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing Parts, Suitable for Low-Temperature Service

A740-21 Standard Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)

A523/A523M-21 Standard Specification for Plain End Seamless and Electric-Resistance-Welded Steel Pipe for High-Pressure Pipe-Type Cable Circuits

A1081/A1081M-21 Standard Test Method for Evaluating Bond of Seven-Wire Steel Prestressing Strand

F969-11(2016) Standard Practice for Construction of Chain-Link Tennis Court Fence

A686-92(2016) Standard Specification for Tool Steel, Carbon

A600-92a(2016) Standard Specification for Tool Steel High Speed

F2409-10(2016) Standard Guide for Fences for Non-Residential Outdoor Swimming Pools, Hot Tubs, and Spas

A741-11(2016) Standard Specification for Metallic-Coated Steel Wire Rope and Fittings for Highway Guardrail

F3204-16 Standard Guide for Design and Construction of Welded Wire Fence Systems for Security Purposes

A153/A153M-16a Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware

A1079-17 Standard Specification for Steel Sheet, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP), Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process

A630-16ae1 Standard Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate

A565/A565M-10(2017)e1 Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service

A713-04(2017) Standard Specification for Steel Wire, High-Carbon Spring, for Heat-Treated Components

A903/A903M-99(2017) Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection

A881/A881M-16a Standard Specification for Steel Wire, Indented, Low-Relaxation for Prestressed Concrete

A877/A877M-17 Standard Specification for Steel Wire, Chromium-Silicon Alloys, Chrome-Silicon-Vanadium Alloy Valve Spring Quality

A1106/A1106M-17 Standard Specification for Pressure Vessel Plate, Alloy Steel, Austenitic High Manganese for Cryogenic Application

A958/A958M-17 Standard Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades

C1563-08(2021) Standard Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sanitary Drain, Waste, Vent, and Storm Piping Applications

A498/A498M-17 Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins

A786/A786M-15(2021) Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates

A543/A543M-09(2021) Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum

A945/A945M-16(2021) Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness

A769/A769M-17 Standard Specification for Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural Shapes

A519/A519M-17 Standard Specification for Seamless Carbon and Alloy Steel Mechanical Tubing

A967/A967M-17 Standard Specification for Chemical Passivation Treatments for Stainless Steel Parts

A895-89(2017) Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip

A1083/A1083M-12(2017) Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, Produced by Twin-Roll Casting Process

A1031/A1031M-12(2017) Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Alloy, Drawing Steel and Structural Steel, Hot-Rolled

F2049-11(2017) Standard Safety Performance Specification for Fences/Barriers for Public, Commercial, and Multi-Family Residential Use Outdoor Play Areas

A679/A679M-17 Standard Specification for Steel Wire, High Tensile Strength, Cold Drawn

A861-04(2017) Standard Specification for High-Silicon Iron Pipe and Fittings

A474-03(2017) Standard Specification for Aluminum-Coated Steel Wire Strand

A817-12(2017) Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire

A809-08(2017) Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire

A1000/A1000M-17 Standard Specification for Steel Wire, Carbon and Alloy Specialty Spring Quality

A123/A123M-17 Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products

A832/A832M-17 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium

A737/A737M-17 Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel

A387/A387M-17a Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum

A1017/A1017M-17 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten

A841/A841M-17 Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP)

A455/A455M-12a(2017) Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese

A865/A865M-06(2017) Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints

A644-17 Standard Terminology Relating to Iron Castings

A662/A662M-17 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service

A297/A297M-21a Standard Specification for Steel Castings, Iron-Chromium and Iron-Chromium-Nickel, Heat Resistant, for General Application

A216/A216M-21 Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service

F1138-21 Standard Specification for Spray Shields for Mechanical Joints

A981/A981M-11(2016) Standard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Steel Prestressing Strand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors

F1200-21a Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F (1 MPa and 65°C))

A1011/A1011M-18a Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength

F880-12(2017) Standard Specification for Stainless Steel Socket, Square Head, and Slotted Headless-Set Screws

A618/A618M-21 Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing

F2281-04(2017) Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications

F1428-92(2017) Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners

F2833-11(2017) Standard Specification for Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type

A192/A192M-17 Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service

F2163-01(2016) Standard Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring

F2162-01(2016) Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type

F2215-15 Standard Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications

F1199-21 Standard Specification for Cast (All Temperatures and Pressures) and Welded Pipe Line Strainers (150 psig and 150°F Maximum)

F3111-16 Standard Specification for Heavy Hex Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength

A1110/A1110M-21 Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes with 52 KSI [360 MPa] Minimum Yield Strength and Impact Requirements

A473-21 Standard Specification for Stainless Steel Forgings

A847/A847M-21 Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance

F3043-15 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Alloy Steel, Heat Treated, 200 ksi Minimum Tensile Strength

F912-11(2017) Standard Specification for Alloy Steel Socket Set Screws

F1941/F1941M-16 Standard Specification for Electrodeposited Coatings on Mechanical Fasteners, Inch and Metric

A262-15(2021) Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels

A502-03(2015) Standard Specification for Rivets, Steel, Structural

F2882/F2882M-17 Standard Specification for Screws, Alloy Steel, Heat Treated, 170 ksi and 1170 MPa Minimum Tensile Strength (Inch and Metric)

A505-16(2021) Standard Specification for Steel, Sheet and Strip, Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

A506-16(2021) Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled

A507-16(2021) Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled

F993-21 Standard Specification for Valve Locking Devices

A749/A749M-14(2021) Standard Specification for Steel, Strip, Carbon and High-Strength, Low-Alloy, Hot-Rolled, General Requirements for

A763-15(2021) Standard Practices for Detecting Susceptibility to Intergranular Attack in Ferritic Stainless Steels

A805/A805M-09(2021) Standard Specification for Steel, Flat Wire, Carbon, Cold-Rolled

A1077/A1077M-21 Standard Specification for Structural Steel with Improved Yield Strength at High Temperature for Use in Buildings

A576-17 Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality

A400-17 Standard Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties

F3151-17 Standard Specification for Driven Steel Post Drive Anchor System

A663/A663M-17 Standard Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties

F880M-16 Standard Specification for Stainless Steel Socket Set Screws (Metric)

A283/A283M-18 Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates

F2437/F2437M-17 Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs

F3148-17a Standard Specification for High Strength Structural Bolt Assemblies, Steel and Alloy Steel, Heat Treated, 144ksi Minimum Tensile Strength, Inch Dimensions

F468-16 Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use

A394-08(2015) Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare

F2329/F2329M-15 Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners

A745/A745M-20 Standard Practice for Ultrasonic Examination of Austenitic Steel Forgings

A504/A504M-18 Standard Specification for Wrought Carbon Steel Wheels

F2045-00(2018)e1 Standard Specification for Indicators, Sight, Liquid Level, Direct and Indirect Reading, Tubular Glass/Plastic

F959/F959M-17a Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners, Inch and Metric Series

A955/A955M-20c Standard Specification for Deformed and Plain Stainless Steel Bars for Concrete Reinforcement

A606/A606M-18 Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance

A328/A328M-13a(2018) Standard Specification for Steel Sheet Piling

A690/A690M-13a(2018) Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments

A988/A988M-17 Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service

F1511-18 Standard Specification for Mechanical Seals for Shipboard Pump Applications

A588/A588M-19 Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance

F2935-12(2018)e1 Standard Specification for Chocks, Panama, Mooring Cast Steel

F2919/F2919M-12(2018) Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) with Variable Mesh Patterns or Meshes Greater than 6 in.2 [3871 mm2] in Panels

A407-18 Standard Specification for Steel Wire, Cold-Drawn, for Coiled-Type Springs

F2936-12(2018)e1 Standard Specification for Chocks, Ship Mooring, Cast Steel

F1267-18 Standard Specification for Metal, Expanded, Steel

A830/A830M-18 Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements

A275/A275M-18 Standard Practice for Magnetic Particle Examination of Steel Forgings

A560/A560M-12(2018) Standard Specification for Castings, Chromium-Nickel Alloy

A100-07(2018) Standard Specification for Ferrosilicon

A551/A551M-08(2018) Standard Specification for Carbon Steel Tires for Railway and Rapid Transit Applications

A456/A456M-08(2018) Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings

A289/A289M-97(2018) Standard Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators

F1173-01(2018) Standard Specification for Thermosetting Resin Fiberglass Pipe Systems to Be Used for Marine Applications

A288-18 Standard Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators

F1298-90(2018) Standard Specification for Flexible, Expansion-Type Ball Joints for Marine Applications

F1271-90(2018) Standard Specification for Spill Valves for Use in Marine Tank Liquid Overpressure Protections Applications

F1311-90(2018) Standard Specification for Large–Diameter Fabricated Carbon Steel Flanges

A989/A989M-18 Standard Specification for Hot Isostatically-Pressed Alloy Steel Flanges, Fittings, Valves, and Parts for High Temperature Service

F2934-12(2018) Standard Specification for Circular Metallic Bellows Type Expansion Joint for HVAC Piping Applications

F1330-91(2018) Standard Guide for Metallic Abrasive Blasting to Descale the Interior of Pipe

A1067/A1067M-12a(2018) Standard Specification for Test Coupons for Steel Castings

A997-08(2018) Standard Practice for Investment Castings, Surface Acceptance Standards, Visual Examination

A508/A508M-18 Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels

A1049/A1049M-18 Standard Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components

A530/A530M-18 Standard Specification for General Requirements for Specialized Carbon and Alloy Steel Pipe

A648-18 Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Pipe

A380/A380M-17 Standard Practice for Cleaning, Descaling, and Passivation of Stainless Steel Parts, Equipment, and Systems

A1033-18 Standard Practice for Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations

F2283-12(2018) Standard Specification for Shipboard Oil Pollution Abatement System

A489-18e1 Standard Specification for Carbon Steel Eyebolts

F2798-09(2018) Standard Specification for Sealless Lube Oil Pump with Oil Through Motor for Marine Applications

F2094/F2094M-18a Standard Specification for Silicon Nitride Bearing Balls

F3040/F3040M-13(2018) Standard Test Method for Mechanical Static Load Testing of Non-Structural Marine Joiner Bulkheads

F783-88(2018) Standard Specification for Staple, Handgrab, Handle, and Stirrup Rung

F821/F821M-01(2018) Standard Specification for Domestic Use Doors and Frames, Steel, Interior, Marine

A633/A633M-18 Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates

F1071-94(2018) Standard Specification for Expanded-Metal Bulkhead Panels

F1068-90(2018) Standard Specification for Doors, Double, Gastight/Airtight, Individually Dogged, for Marine Use

F1106-87(2018) Standard Specification for Warping Heads, Rope Handling (Gypsy Head, Capstan Head)

F1074-87(2018) Standard Specification for Cleats, Welded Horn Type

F1072-94(2018) Standard Specification for Expanded-Metal Doors

F2730/F2730M-18a Standard Specification for Silicon Nitride Cylindrical Bearing Rollers

F1309-98(2018) Standard Practice for Installation Procedures for Fitting Chocks to Marine Machinery Foundations

F1244-08(2018) Standard Specification for Berths, Marine

F1385-07(2018) Standard Practice for Platforms in Cargo Tanks

A426/A426M-18 Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service

F1908-08(2018) Standard Guide for Fences for Residential Outdoor Swimming Pools, Hot Tubs, and Spas

F2699-08(2018) Standard Guide for Fences for Commercial and Public Outdoor Water Spray/Play Areas

F2698-08(2018) Standard Guide for Fences for Above-Ground and In-ground Skate Park Facilities

A252/A252M-19 Standard Specification for Welded and Seamless Steel Pipe Piles

F3059-18 Standard Specification for Fiber-Reinforced Polymer (FRP) Gratings Used in Marine Construction and Shipbuilding

A578/A578M-17 Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications

A434/A434M-18 Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered

A350/A350M-18 Standard Specification for Carbon and Low-Alloy Steel Forgings, Requiring Notch Toughness Testing for Piping Components

A313/A313M-18 Standard Specification for Stainless Steel Spring Wire

A938-18 Standard Test Method for Torsion Testing of Wire

A931-18 Standard Test Method for Tension Testing of Wire Ropes and Strand

A794/A794M-18 Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled

A636-08(2018) Standard Specification for Nickel Oxide Sinter

A389/A389M-13(2018) Standard Specification for Steel Castings, Alloy, Specially Heat Treated, for Pressure-Containing Parts, Suitable for High-Temperature Service

F3042-13(2018) Standard Specification for Nonferrous Hex Socket, Slotted Headless, and Square Head Set Screws

A915/A915M-08(2018) Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades

A228/A228M-18 Standard Specification for Steel Wire, Music Spring Quality

A232/A232M-18 Standard Specification for Chromium-Vanadium Alloy Steel Valve Spring Quality Wire

A231/A231M-18 Standard Specification for Chromium-Vanadium Alloy Steel Spring Wire

A827/A827M-14(2018) Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications

A724/A724M-09(2018) Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Pressure Vessels

A401/A401M-18 Standard Specification for Steel Wire, Chromium-Silicon Alloy

A589/A589M-06(2018) Standard Specification for Seamless and Welded Carbon Steel Water-Well Pipe

A890/A890M-18a Standard Specification for Castings, Iron-Chromium-Nickel-Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic) for General Application

A1015-01(2018) Standard Guide for Videoborescoping of Tubular Products for Sanitary Applications

F467-13(2018) Standard Specification for Nonferrous Nuts for General Use

F468M-06(2018) Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)

F467M-06a(2018) Standard Specification for Nonferrous Nuts for General Use (Metric)

A689-97(2018) Standard Specification for Carbon and Alloy Steel Bars for Springs

A556/A556M-18 Standard Specification for Seamless Cold-Drawn Carbon Steel Feedwater Heater Tubes

A125-96(2018) Standard Specification for Steel Springs, Helical, Heat-Treated

A210/A210M-19 Standard Specification for Seamless Medium-Carbon Steel Boiler and Superheater Tubes

A996/A996M-16 Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement

E618-07(2018) Standard Test Method for Evaluating Machining Performance of Ferrous Metals Using an Automatic Screw/Bar Machine

A970/A970M-18 Standard Specification for Headed Steel Bars for Concrete Reinforcement

A416/A416M-18 Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete

A994-18 Standard Guide for Editorial Procedures and Form of Product Specifications for Steel, Stainless Steel, and Related Alloys

A779/A779M-16 Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted for Prestressed Concrete

A1-00(2018) Standard Specification for Carbon Steel Tee Rails

F1075-97(2018) Standard Specification for Dehumidifier, Shipboard, Mechanically Refrigerated, Self-Contained

F1030-86(2018) Standard Practice for Selection of Valve Operators

A1065/A1065M-18 Standard Specification for Cold-Formed Electric-Fusion (Arc) Welded High-Strength Low–Alloy Structural Tubing in Shapes, with 50 ksi [345 MPa] Minimum Yield Point

A829/A829M-17 Standard Specification for Alloy Structural Steel Plates

F1347-91(2018) Standard Specification for Manually Operated Fueling Hose Reels

F1546-96(2018) Standard Specification for Fire Hose Nozzles

F1837M-97(2018) Standard Specification for Heat-Shrink Cable Entry Seals (Metric)

F1835-97(2018) Standard Guide for Cable Splicing Installations

F682-82a(2018) Standard Specification for Wrought Carbon Steel Sleeve-Type Pipe Couplings

A656/A656M-18 Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability

F2016-00(2018) Standard Practice for Establishing Shipbuilding Quality Requirements for Hull Structure, Outfitting, and Coatings

A1016/A1016M-18a Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes

A1043/A1043M-18 Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings

F1297-90(2018) Standard Guide for Location and Instruction Symbols for Evacuation and Lifesaving Equipment

F1755M-96(2018) Standard Specification for Solid State Bargraph Meters for Shipboard Use (Metric)

F3286-17 Standard Guide for Cybersecurity and Cyberattack Mitigation

F3285-18 Standard Guide for Installation and Application of Type C Portable Tanks for Marine LNG Service

F956-91(2018) Standard Specification for Bell, Cast, Sound Signalling

F1198-92(2018)e1 Standard Guide for Shipboard Fire Detection Systems

F957-91(2018) Standard Specification for Gong, Sound Signaling

A747/A747M-18 Standard Specification for Steel Castings, Stainless, Precipitation Hardening

A802-19 Standard Practice for Steel Castings, Surface Acceptance Standards, Visual Examination

A767/A767M-19 Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement

F2361-18 Standard Guide for Ordering Low Voltage (1000 VAC or Less) Alternating Current Electric Motors for Shipboard Service—Up to and Including Motors of 500 Horsepower

E527-16 Standard Practice for Numbering Metals and Alloys in the Unified Numbering System (UNS)

A109/A109M-16(2018) Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled

A1010/A1010M-13(2018) Standard Specification for Higher-Strength Martensitic Stainless Steel Plate, Sheet, and Strip

A564/A564M-19a Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes

A108-18 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished

A770/A770M-03(2018) Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications

F2039-00(2018) Standard Guide for Basic Elements of Shipboard Occupational Health and Safety Program

A586-18 Standard Specification for Metallic-Coated Parallel and Helical Steel Wire Structural Strand

A723/A723M-18a Standard Specification for Alloy Steel Forgings for High-Strength Pressure Component Application

A1024/A1024M-18 Standard Specification for Steel Line Pipe, Black, Plain-End, Seamless

A1112/A1112M-18 Standard Specification for Cold-Formed Welded High Strength Carbon Steel or High-Strength Low-Alloy Steel Hollow Structural Sections (HSS) in Rounds and Shapes

A453/A453M-17 Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels

A369/A369M-18a Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service

F1207M-12(2018) Standard Specification for Electrical Insulation Monitors for Monitoring Ground Resistance in Active Electrical Systems [Metric]

F1019M-00(2018) Standard Specification for Steel Deck Gear Stowage Box [Metric]

F1669M-12(2018) Standard Specification for Insulation Monitors for Shipboard Electrical Systems [Metric]

A354-17e2 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners

F2431-04(2018) Standard Specification for Ring Bearing, Inner: For Needle Roller Bearing with Thick Outer Ring

F2430-04(2018) Standard Specification for Bearing, Roller, Needle: Assembly (Thick Outer Race)

A1004/A1004M-99(2018) Standard Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members

F2444-04(2018) Standard Practice for Damage Prevention of Bearings, and Bearing Components Through Proper Handling Techniques

F1548-01(2018) Standard Specification for Performance of Fittings for Use with Gasketed Mechanical Couplings Used in Piping Applications

F2446-04(2018) Standard Classification for Hierarchy of Equipment Identifiers and Boundaries for Reliability, Availability, and Maintainability (RAM) Performance Data Exchange

A285/A285M-17 Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength

A184/A184M-19 Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement

A902-18a Standard Terminology Relating to Metallic Coated Steel Products

A998/A998M-18 Standard Practice for Structural Design of Reinforcements for Fittings in Factory–Made Corrugated Steel Pipe for Sewers and Other Applications

A249/A249M-18a Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes

F3329-18 Standard Specification for Carbon and Alloy Steel Metric Rivets

A314-19 Standard Specification for Stainless Steel Billets and Bars for Forging

A276/A276M-17 Standard Specification for Stainless Steel Bars and Shapes

A943/A943M-01(2019) Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes

A49-12(2019) Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars

A949/A949M-01(2019) Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe

A388/A388M-19 Standard Practice for Ultrasonic Examination of Steel Forgings

A478-97(2019) Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire

A368-95a(2019) Standard Specification for Stainless Steel Wire Strand

A492-95(2019) Standard Specification for Stainless Steel Rope Wire

A813/A813M-14(2019) Standard Specification for Single- or Double-Welded Austenitic Stainless Steel Pipe

A908-03(2019) Standard Specification for Stainless Steel Needle Tubing

A814/A814M-15(2019) Standard Specification for Cold-Worked Welded Austenitic Stainless Steel Pipe

F1069-19 Standard Specification for Doors, Watertight, Gastight/Airtight and Weathertight, Individually Dogged, for Marine Use

F1003-19 Standard Specification for Searchlights on Motor Lifeboats

F1070-19 Standard Specification for Doors, Non-Tight, for Marine Use

A247-19 Standard Test Method for Evaluating the Microstructure of Graphite in Iron Castings

A264-12(2019) Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate

A859/A859M-04(2019)e1 Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components

A263-12(2019) Standard Specification for Stainless Chromium Steel-Clad Plate

A3-01(2019) Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)

A999/A999M-18 Standard Specification for General Requirements for Alloy and Stainless Steel Pipe

F1073-19 Standard Specification for Door Fittings, for Watertight /Gastight /Airtight, Weathertight, and Non-Tight Doors, for Marine Use

F1144-19 Standard Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight, Hinged

F1143-19 Standard Specification for Manhole Cover Assembly, Bolted, Raised, Oiltight and Watertight

F2044-09(2019)e1 Standard Specification for Liquid Level Indicating Equipment, Electrical

F1197-19 Standard Specification for Sliding Watertight Door Control Systems

F1196-19 Standard Specification for Sliding Watertight Door Assemblies

A242/A242M-13(2018) Standard Specification for High-Strength Low-Alloy Structural Steel

A722/A722M-18 Standard Specification for High-Strength Steel Bars for Prestressed Concrete

F1136/F1136M-11(2019) Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners

A529/A529M-19 Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality

A471/A471M-19 Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels

A641/A641M-19 Standard Specification for Zinc–Coated (Galvanized) Carbon Steel Wire

A577/A577M-17 Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates

F2000-19 Standard Safety Performance Specification for Fences for Baseball and Softball Fields

A36/A36M-19 Standard Specification for Carbon Structural Steel

A214/A214M-19 Standard Specification for Electric-Resistance-Welded Carbon Steel Heat-Exchanger and Condenser Tubes

A671/A671M-20 Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures

A536-84(2019)e1 Standard Specification for Ductile Iron Castings

A128/A128M-19 Standard Specification for Steel Castings, Austenitic Manganese

A918-06(2019) Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface

A384/A384M-07(2019) Standard Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies

F1718-01(2019) Standard Specification for Rotary Positive Displacement Distillate Fuel Pumps

F2014-00(2019) Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications

F1795-00(2019) Standard Specification for Pressure-Reducing Valves for Air or Nitrogen Systems

F1791-00(2019) Standard Specification for Filters Used in Air or Nitrogen Systems

F2015-00(2019) Standard Specification for Lap Joint Flange Pipe End Applications

A1090/A1090M-19 Standard Specification for Forged Rings and Hollows for Use as Base Plates in Power Transmission Structures

A736/A736M-17 Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium (Niobium) Alloy Steel

A738/A738M-19 Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service

F567-14a(2019) Standard Practice for Installation of Chain-Link Fence

A857/A857M-19 Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage

A896/A896M-09(2019) Standard Practice for Conducting Case Studies on Galvanized Structures

F964-13(2019) Standard Specification for Rigid Poly (Vinyl Chloride) (PVC) Exterior Profiles Used for Fencing and Railing

F626-14(2019) Standard Specification for Fence Fittings

F3342-19 Standard Guide for Temporary Fence Applications for Construction Sites

F2957-13(2019)e1 Standard Specification for Ornamental Aluminum Fence Systems

F2282-18 Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners

F1565-00(2019) Standard Specification for Pressure-Reducing Valves for Steam Service

F552-14(2019) Standard Terminology Relating to Chain Link Fencing

F1137/F1137M-19 Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners

F1685-00(2019) Standard Specification for Pressure-Reducing Manifolds for Air or Nitrogen Systems

F1567-94(2019) Standard Specification for Fabricated or Cast Automatic Self-Cleaning, Fuel Oil and Lubricating Oil Strainers

F2154-13(2019) Standard Specification for Sound-Absorbing Board, Fibrous Glass, Perforated Fibrous Glass Cloth Faced

F1836M-15(2019) Standard Specification for Stuffing Tubes, Nylon, and Packing Assemblies (Metric)

F2877/F2877M-13(2019) Standard Test Method for Shock Testing of Structural Insulation of A-Class Divisions Constructed of Steel or Aluminum

F2087-13(2019) Standard Specification for Packing, Fiberglass, Braided, Rope, and Wick

F1134-15(2019) Standard Specification for Insulation Resistance Monitor for Shipboard Electrical Motors and Generators

A307-21 Standard Specification for Carbon Steel Bolts, Studs, and Threaded Rod 60 000 PSI Tensile Strength

A517/A517M-17 Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered

A572/A572M-21e1 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel

F1985-99(2019)e1 Standard Specification for Pneumatic-Operated, Globe-Style, Control Valves

F3226/F3226M-19 Standard Specification for Metallic Press-Connect Fittings for Piping and Tubing Systems

A421/A421M-21 Standard Specification for Stress-Relieved Steel Wire for Prestressed Concrete

A381/A381M-18 Standard Specification for Metal-Arc-Welded Carbon or High-Strength Low-Alloy Steel Pipe for Use With High-Pressure Transmission Systems

F1370-92(2019)e1 Standard Specification for Pressure-Reducing Valves for Water Systems, Shipboard

A675/A675M-14(2019) Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties

F1994-99(2019)e1 Standard Test Method for Shipboard Fixed Foam Firefighting Systems

F1470-19 Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection

A920/A920M-14(2019) Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties

A807/A807M-19 Standard Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications

F707/F707M-94(2019)e1 Standard Specification for Modular Gauge Boards

A810-01(2019) Standard Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh

A640-97(2019) Standard Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable

F1940-07a(2019) Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners

F1911-05(2019) Standard Practice for Installation of Barbed Tape

A333/A333M-18 Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service and Other Applications with Required Notch Toughness

A270/A270M-15(2019) Standard Specification for Seamless and Welded Austenitic and Ferritic/Austenitic Stainless Steel Sanitary Tubing

A1047/A1047M-05(2019) Standard Test Method for Pneumatic Leak Testing of Tubing

A351/A351M-18e1 Standard Specification for Castings, Austenitic, for Pressure-Containing Parts

A1032-15(2019) Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard-Drawn Used for Prestressed Concrete Pipe

A101-04(2019) Standard Specification for Ferrochromium

A102-04(2019) Standard Specification for Ferrovanadium

A144-04(2019) Standard Specification for Ferrotungsten

A132-04(2019) Standard Specification for Ferromolybdenum

A126-04(2019) Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings

A324-08(2019) Standard Specification for Ferrotitanium

A146-04(2019) Standard Specification for Molybdenum Oxide Products

A1088-13(2019) Standard Specification for Steel, Sheet, Cold-Rolled, Complex Phase (CP), Dual Phase (DP) and Transformation Induced Plasticity (TRIP)

F1345-10a(2019) Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric

F1999-14(2019) Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Fence Systems

A265-12(2019) Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate

A673/A673M-17 Standard Specification for Sampling Procedure for Impact Testing of Structural Steel

A197/A197M-00(2019) Standard Specification for Cupola Malleable Iron

A516/A516M-17 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service

A532/A532M-10(2019) Standard Specification for Abrasion-Resistant Cast Irons

A423/A423M-19 Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes

A178/A178M-19 Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes

A134/A134M-19 Standard Specification for Pipe, Steel, Electric-Fusion (Arc)-Welded (Sizes NPS 16 and Over)

A823-99(2019) Standard Specification for Statically Cast Permanent Mold Gray Iron Castings

A610-79(2019) Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size

A571/A571M-01(2019) Standard Specification for Austenitic Ductile Iron Castings for Pressure-Containing Parts Suitable for Low-Temperature Service

A914/A914M-19 Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements

A959-19 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels

A1095-15(2019) Standard Specification for High-Silicon Molybdenum Ferritic Iron Castings

A707/A707M-19 Standard Specification for Forged Carbon and Alloy Steel Flanges for Low-Temperature Service

A603-19 Standard Specification for Metallic-Coated Steel Structural Wire Rope

A700-14(2019) Standard Guide for Packaging, Marking, and Loading Methods for Steel Products for Shipment

A979/A979M-03(2019) Standard Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field

A1058-19 Standard Test Methods for Mechanical Testing of Steel Products—Metric

F879M-16 Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)

A106/A106M-19a Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service

A409/A409M-19 Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service

A99-03(2019) Standard Specification for Ferromanganese

A568/A568M-19a Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for

F1085-19 Standard Specification for Mattress and Box Springs for Use in Berths in Marine Vessels

F1092-19 Standard Specification for Fiberglass (GRP) Pultruded Open-Weather Storm and Guard, Square Railing Systems

F3353-19 Standard Guide for Shipboard Use of Lithium-Ion (Li-ion) Batteries

A727/A727M-14(2019) Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness

A774/A774M-14(2019) Standard Specification for As-Welded Wrought Austenitic Stainless Steel Fittings for General Corrosive Service at Low and Moderate Temperatures

A758/A758M-14(2019) Standard Specification for Wrought-Carbon Steel Butt-Welding Piping Fittings with Improved Notch Toughness

A609/A609M-12(2018) Standard Practice for Castings, Carbon, Low-Alloy, and Martensitic Stainless Steel, Ultrasonic Examination Thereof

A203/A203M-17 Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel

F782-19 Standard Specification for Doors, Furniture, Marine

F1245-19 Standard Specification for Faucets, Single and Double, Compression and Self-Closing Type, Shipboard

F1076-19 Standard Practice for Expanded Welded and Silver Brazed Socket Joints for Pipe and Tube

F436/F436M-19 Standard Specification for Hardened Steel Washers Inch and Metric Dimensions

A858/A858M-19 Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service

A179/A179M-19 Standard Specification for Seamless Cold-Drawn Low-Carbon Steel Heat-Exchanger and Condenser Tubes

F1123-87(2019) Standard Specification for Non-Metallic Expansion Joints

F1121-87(2019) Standard Specification for International Shore Connections for Marine Fire Applications

F1139-88(2019) Standard Specification for Steam Traps and Drains

A884/A884M-19e1 Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement

A862/A862M-98(2020) Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe

F1142-19 Standard Specification for Manhole Cover Assembly, Bolted, Semi-Flush, Oiltight and Watertight

A917-08(2020) Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)

F1270-97(2019) Standard Practice for Preparing and Locating Emergency Muster Lists

F1182-07(2019) Standard Specification for Anodes, Sacrificial Zinc Alloy

F1172-88(2019) Standard Specification for Fuel Oil Meters of the Volumetric Positive Displacement Type

F841-19 Standard Specification for Thrusters, Tunnel, Permanently Installed in Marine Vessels

F1338-91(2019) Standard Guide for Main Propulsion Medium Speed Marine Diesel Engines Covering Performance and Minimum Scope of Assembly

F1333-91(2019) Standard Specification for Construction of Fire and Foam Station Cabinets

F1312-19 Standard Specification for Brick, Insulating, High Temperature, Fire Clay

F1476-07(2019) Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications

F1348/F1348M-91(2019) Standard Specification for Pneumatic Rotary Descaling Machines

A254/A254M-12(2019) Standard Specification for Copper-Brazed Steel Tubing

A435/A435M-17 Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates

A1001-18 Standard Specification for High-Strength Steel Castings in Heavy Sections

A131/A131M-19 Standard Specification for Structural Steel for Ships

F940-99(2019)e1 Standard Practice for Quality Control Receipt Inspection Procedures for Protective Coatings (Paint), Used in Marine Construction and Shipbuilding

F1155-10(2019) Standard Practice for Selection and Application of Piping System Materials

F2168-13(2019) Standard Specification for Packing Material, Graphitic, Corrugated Ribbon or Textured Tape, and Die-Formed Ring

F941-99(2019) Standard Practice for Inspection of Marine Surface Preparation and Coating Application

A363-03(2020)e1 Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand

A1093/A1093M-15(2020)e1 Standard Specification for Electrolytic Plasma Treatment Processing of Conductive Materials

F1099M-18 Standard Specification for Rat Guards, Ship’s (Metric)

F1005-91(2019) Standard Practice for HVAC Duct Shapes; Identification and Description of Design Configuration

F1098-87(2019) Standard Specification for Envelope Dimensions for Butterfly Valves—NPS 2 to 24

F1120-87(2019) Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications

A541/A541M-05(2020) Standard Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components

A483/A483M-10(2020) Standard Specification for Silicomanganese

A323-05(2020) Standard Specification for Ferroboron

A592/A592M-10(2020) Standard Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Parts for Pressure Vessels

A561-08(2020) Standard Practice for Macroetch Testing of Tool Steel Bars

F3019/F3019M-19 Standard Specification for Chromium Free Zinc-Flake Composite, with or without Integral Lubricant, Corrosion Protective Coatings for Fasteners

A601/A601M-10(2020) Standard Specification for Electrolytic Manganese Metal

A701/A701M-10(2020) Standard Specification for Ferromanganese-Silicon

A1099/A1099M-20 Standard Specification for Modified Alloy Steel Forgings, Forged Bar, and Rolled Bar Commonly Used in Oil and Gas Pressure Vessels

A1062-10(2020) Standard Specification for Steel Castings Sampling

A1045-10(2021) Standard Specification for Flexible Poly (Vinyl Chloride) (PVC) Gaskets Used in Connection of Vitreous China Plumbing Fixtures to Sanitary Drainage Systems

F906-85(2020) Standard Specification for Letters and Numerals for Ships

F3394/F3394M-20 Standard Specification for Hardened Steel Backup and Reaction Washers Inch and Metric Dimensions

A597/A597M-14(2020) Standard Specification for Cast Tool Steel

A481-05(2020) Standard Specification for Chromium Metal

A892-09(2020) Standard Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels

A649/A649M-10(2020) Standard Specification for Forged Steel Rolls Used for Corrugating Paper Machinery

A495-06(2020) Standard Specification for Calcium-Silicon Alloys

A966/A966M-15(2020) Standard Practice for Magnetic Particle Examination of Steel Forgings Using Alternating Current

A1025/A1025M-10(2020) Standard Specification for Ferroalloys and Other Alloying Materials, General Requirements

A982/A982M-10(2020) Standard Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils

E588-03(2020) Standard Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method

A1089/A1089M-14(2020) Standard Specification for Highly Loaded Anti-Friction Bearing Steel

A183-14(2020) Standard Specification for Carbon Steel Track Bolts and Nuts

A2-02(2020) Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types

F2191/F2191M-13(2020)e1 Standard Specification for Packing Material, Graphitic or Carbon Braided Yarn

A437/A437M-15(2021) Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service

A334/A334M-04a(2021) Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service

A799/A799M-10(2020) Standard Practice for Steel Castings, Stainless, Instrument Calibration, for Estimating Ferrite Content

A540/A540M-15(2021) Standard Specification for Alloy-Steel Bolting for Special Applications

A1092-15(2020) Standard Specification for Steel Sheet, as Cold-Reduced, for Conversion to Annealed Cold-Rolled Steel Sheet, and Hot Dip Metallic-Coated Steel Sheet

A835/A835M-10(2020) Standard Specification for Sizes of Ferroalloys and Alloy Additives

F2362-03(2019) Standard Specification for Temperature Monitoring Equipment

A638/A638M-20 Standard Specification for Precipitation Hardening Iron Base Superalloy Bars, Forgings, and Forging Stock for High-Temperature Service

A922-05(2020) Standard Specification for Silicon Metal

F3052-14(2020)e1 Standard Guide for Conducting Small Boat Stability Test (Deadweight Survey and Air Inclining Experiment) to Determine Lightcraft Weight and Centers of Gravity of a Small Craft

A579/A579M-20 Standard Specification for Superstrength Alloy Steel Forgings

F1130-99(2020) Standard Practice for Inspecting the Coating System of a Ship

F1323-14(2020) Standard Specification for Shipboard Incinerators

A833-19 Standard Test Method for Indentation Hardness of Metallic Materials by Comparison Hardness Testers

A764-07(2021) Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs

A960/A960M-20 Standard Specification for Common Requirements for Wrought Steel Piping Fittings

A295/A295M-14(2020) Standard Specification for High-Carbon Anti-Friction Bearing Steel

A466/A466M-07(2020) Standard Specification for Weldless Chain

A418/A418M-15(2020) Standard Practice for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings

A470/A470M-05(2020) Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts

A467/A467M-20 Standard Specification for Machine and Coil Chain

F683-21 Standard Practice for Selection and Application of Thermal Insulation for Piping and Machinery

F879-15(2020) Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws

A1021/A1021M-20 Standard Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service

C1461-21 Standard Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems for Above and Below Ground Use

A888-21a Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications

A1038-19 Standard Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method

A974-97(2021) Standard Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic-Coated or Polyvinyl Chloride (PVC) Coated)

A27/A27M-20 Standard Specification for Steel Castings, Carbon, for General Application

A278/A278M-01(2020) Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650 °F (350 °C)

A159-83(2020) Standard Specification for Automotive Gray Iron Castings

C1440-21 Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems

A732/A732M-20 Standard Specification for Castings, Investment, Carbon and Low-Alloy Steel for General Application, and Cobalt Alloy for High Strength at Elevated Temperatures

A995/A995M-20 Standard Specification for Castings, Austenitic-Ferritic (Duplex) Stainless Steel, for Pressure-Containing Parts

F2660-20 Standard Test Method for Qualifying Coatings for Use on F3125 Grade A490 Structural Bolts Relative to Environmental Hydrogen Embrittlement

A1014/A1014M-16(2021) Standard Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service

A143/A143M-07(2020) Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement

F2548-20 Standard Specification for Expanded Metal Fence Systems for Security Purposes

A319-71(2020) Standard Specification for Gray Iron Castings for Elevated Temperatures for Non-Pressure-Containing Parts

A436-84(2020) Standard Specification for Austenitic Gray Iron Castings

A322-13(2018)e1 Standard Specification for Steel Bars, Alloy, Standard Grades

F432-19 Standard Specification for Roof and Rock Bolts and Accessories

A834-95(2020) Standard Specification for Common Requirements for Iron Castings for General Industrial Use

A822/A822M-20 Standard Specification for Seamless Cold-Drawn Carbon Steel Tubing for Hydraulic System Service

A1076/A1076M-20 Standard Specification for Cold Formed Carbon Structural Steel Tubing Made from Metallic Precoated Sheet Steel

A1068-10(2020) Standard Practice for Life-Cycle Cost Analysis of Corrosion Protection Systems on Iron and Steel Products

A800/A800M-20 Standard Practice for Estimating Ferrite Content of Stainless Steel Castings Containing Both Ferrite and Austenite

F2780-20 Standard Guide for Design and Construction of Expanded Metal Security Fences and Barriers

A1074-11(2020) Standard Specification for Hot Tin and Hot Tin/Lead Dip on Ferrous and Non-Ferrous Metals

A1082/A1082M-16(2021) Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications

A1056-20 Standard Specification for Cast Iron Couplings Used for Joining Hubless Cast Iron Soil Pipe and Fittings

C564-20a Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings

C1277-20 Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings

F788-20 Standard Specification for Surface Discontinuities of Bolts, Screws, Studs, and Rivets, Inch and Metric Series

C1540-20 Standard Specification for Heavy-Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings

A1072/A1072M-11(2020) Standard Specification for Zinc-5 % Aluminum (Hot-Dip) Coatings on Iron and Steel Products

A537/A537M-20 Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel

A148/A148M-20e1 Standard Specification for Steel Castings, High Strength, for Structural Purposes

A608/A608M-20 Standard Specification for Centrifugally Cast Iron-Chromium-Nickel High-Alloy Tubing for Pressure Application at High Temperatures

A612/A612M-20 Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service

F837M-20 Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]

F901-20 Standard Specification for Aluminum Transmission Tower Bolts and Nuts

F1883-20 Standard Practice for Selection of Wire and Cable Size in AWG or Metric Units

A500/A500M-21a Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes

A1002-16(2020) Standard Specification for Castings, Nickel-Aluminum Ordered Alloy

F1808-03(2019) Standard Guide for Weight Control Technical Requirements for Surface Ships

F3393-20e1 Zinc-Flake Coating Systems for Fasteners

A501/A501M-21 Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing

A793-96(2014) Standard Specification for Rolled Floor Plate, Stainless Steel

A29/A29M-20 Standard Specification for General Requirements for Steel Bars, Carbon and Alloy, Hot-Wrought

A930-09(2020) Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits

A111-99a(2020) Standard Specification for Zinc-Coated (Galvanized) “Iron” Telephone and Telegraph Line Wire

A925-03(2020) Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand

A499-15(2020) Standard Specification for Steel Bars and Shapes, Carbon Rolled from “T” Rails

F1014-20 Standard Specification for Flashlights on Vessels

F837-20 Standard Specification for Stainless Steel Socket Head Cap Screws

A513/A513M-20a Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing

A836/A836M-14(2020) Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service

A459-08(2020) Standard Specification for Zinc-Coated Flat Steel Armoring Tape

F900-11(2017) Standard Specification for Industrial and Commercial Steel Swing Gates

F654-07(2017) Standard Specification for Residential Chain Link Fence Gates

F2200-20 Standard Specification for Automated Vehicular Gate Construction

F3449-20 Standard Guide for Inclusion of Cyber Risks into Maritime Safety Management Systems in Accordance with IMO Resolution MSC.428(98)―Cyber Risks and Challenges

F2630-14 Standard Guide for Self-Closing/Self-Latching General-Purpose Gates

F1184-16 Standard Specification for Industrial and Commercial Horizontal Slide Gates

A1061/A1061M-20ae1 Standard Test Methods for Testing Multi-Wire Steel Prestressing Strand

A304-20 Standard Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements

A573/A573M-20 Standard Specification for Structural Carbon Steel Plates

F541-12(2020) Standard Specification for Alloy Steel Eyebolts

A449-14(2020) Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use

A31-14(2020) Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels

A372/A372M-20e1 Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels

A503/A503M-15(2020) Standard Specification for Ultrasonic Examination of Forged Crankshafts

F1794-97(2021) Standard Specification for Hand-Operated, Globe-Style Valves for Gas (Except Oxygen Gas) and Hydraulic Systems

F1799-97(2021) Standard Guide for Shipboard Generated Waste Management Audits

F1508-96(2021) Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas, and Liquid Services

F1201-88(2021) Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0 °F

F1431-92(2021) Standard Specification for Water Trap for Diesel Exhaust

F2161-21 Standard Guide for Instrument and Precision Bearing Lubricants—Part 1 Oils

F1793-97(2021) Standard Specification for Automatic Shut-Off Valves (Also Known as Excess Flow Valves, EFV) for Air or Nitrogen Service

F1792-97(2021) Standard Specification for Special Requirements for Valves Used in Gaseous Oxygen Service

A871/A871M-20 Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance

A887-20 Standard Specification for Borated Stainless Steel Plate, Sheet, and Strip for Nuclear Application

A575-20 Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades

F2443-04(2021) Standard Specification for Roller, Bearing, Needle, Ferrous, Solid, Spherical End

F2953-12(2021) Standard Specification for Phenolic Raw Materials for the Use in Bearing Cages

A909/A909M-06(2021) Standard Specification for Steel Forgings, Microalloy, for General Industrial Use

A290/A290M-16(2021) Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears

A482/A482M-11(2021) Standard Specification for Ferrochrome-Silicon

A891/A891M-16(2021) Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels

A986/A986M-01(2021) Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings

A983/A983M-06(2021) Standard Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines

A550-16(2021) Standard Specification for Ferrocolumbium (Ferroniobium)

F836M-20 Standard Specification for Style 1 Stainless Steel Metric Nuts (Metric)

A311/A311M-04(2020) Standard Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements

A760/A760M-15(2020) Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains

A625/A625M-13(2018) Standard Specification for Tin Mill Products, Black Plate, Single-Reduced

A742/A742M-20 Standard Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe

A761/A761M-18 Standard Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches

A562/A562M-10(2021) Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings

A599/A599M-07(2017) Standard Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet

A1057/A1057M-08(2019) Standard Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process

A856/A856M-03(2020) Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire

A650/A650M-18 Standard Specification for Tin Mill Products, Black Plate, Double Reduced

A882/A882M-20 Standard Specification for Filled Epoxy-Coated Seven-Wire Steel Prestressing Strand

A1003/A1003M-15 Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members

A1114/A1114M-20 Standard Specification for Low-Relaxation, Seven-Wire, Grade 240 [1655], Stainless Steel Strand for Prestressed Concrete

A855/A855M-03(2020) Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Wire Strand

F1387-19 Standard Specification for Performance of Piping and Tubing Mechanically Attached Fittings

A657/A657M-18 Standard Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced

A929/A929M-18 Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe

A755/A755M-18 Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products

A886/A886M-17 Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete

F2453/F2453M-14(2019) Standard Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) for Meshes of 6 in.2  [3871 mm2] or Less, in Panels or Rolls, with Uniform Meshes

A1035/A1035M-20 Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement

A684/A684M-17 Standard Specification for Steel, Strip, High-Carbon, Cold-Rolled

A704/A704M-19e1 Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement

A910/A910M-18 Standard Specification for Uncoated, Weldless, 2-Wire and 3-Wire Steel Strand for Prestressed Concrete

F537-01(2019) Standard Specification for Design, Fabrication, and Installation of Fences Constructed of Wood and Related Materials

A964/A964M-17 Standard Specification for Corrugated Steel Box Culverts

A229/A229M-18 Standard Specification for Steel Wire, Quenched and Tempered for Mechanical Springs

A424/A424M-18 Standard Specification for Steel, Sheet, for Porcelain Enameling

A950/A950M-11(2015) Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling

A414/A414M-14(2019) Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels

A227/A227M-17 Standard Specification for Steel Wire, Cold-Drawn for Mechanical Springs

A1113/A1113M-20e1 Standard Specification for Corrugated Steel Structural Plate, Polymer-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches

A580/A580M-18 Standard Specification for Stainless Steel Wire

A849-15(2021) Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe

A818-06(2021) Standard Specification for Coppered Carbon Steel Wire

A390-06(2021) Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)

A460-11(2021) Standard Specification for Copper-Clad Steel Wire Strand

A1012-10(2021) Standard Specification for Seamless and Welded Ferritic, Austenitic and Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins

A928/A928M-14(2021) Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal

F1386-92(2021) Standard Guide for Construction of Sounding Tube and Striker Plate for Tank Sounding

A803/A803M-16(2021) Standard Specification for Seamless and Welded Ferritic Stainless Steel Feedwater Heater Tubes

A488/A488M-18e2 Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel

A965/A965M-21a Standard Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts

A990/A990M-21 Standard Specification for Castings, Iron-Nickel-Chromium and Nickel Alloys, Specially Controlled for Pressure-Retaining Parts for Corrosive Service

F2781-15(2021) Standard Practice for Testing Forced Entry, Ballistic and Low Impact Resistance of Security Fence Systems

F2589-16(2021) Standard Specification for Ornamental Fences Employing Steel Tubular Pickets

A450/A450M-21 Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes

A709/A709M-21 Standard Specification for Structural Steel for Bridges

A751-21 Standard Test Methods and Practices for Chemical Analysis of Steel Products

A1008/A1008M-21a Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Required Hardness, Solution Hardened, and Bake Hardenable

A972/A972M-00(2021) Standard Specification for Fusion Bonded Epoxy-Coated Pipe Piles

A759-21 Standard Specification for Carbon Steel Crane Rails

F1878-21 Standard Guide for Escort Vessel Evaluation and Selection

A479/A479M-21 Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

A66-21 Standard Specification for Steel Screw Spikes

A67-00(2021) Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon-Hot-Worked

A744/A744M-21a Standard Specification for Castings, Iron-Chromium-Nickel, Corrosion Resistant, for Severe Service

A511/A511M-21a Standard Specification for Seamless Stainless Steel Mechanical Tubing and Hollow Bar

A844/A844M-21 Standard Specification for Steel Plates, 9 %  Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process

A1120/A1120M-21 Standard Specification for Electric-Resistance-Welded Carbon Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes with Textured Surface

F1166-21 Standard Practice for Human Engineering Design for Marine Systems, Equipment, and Facilities

F987-04(2022) Standard Specification for Portable Intermediate Flush Deck Stanchion

F670-02(2022) Standard Specification for Tanks, 5 and 10-Gal (20 and 40-L) Lube Oil Dispensing

A327/A327M-22 Standard Test Methods for Impact Testing of Cast Irons

A367-22 Standard Test Methods for Chill Testing of Cast Iron

F2832-11(2021) Standard Guide for Accelerated Corrosion Testing for Mechanical Fasteners

F2482/F2482M-21 Standard Specification for Load-Indicating Externally Threaded Fasteners

F2488-05(2022) Standard Terminology for Rolling Element Bearings

F2511-05(2022) Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid

F1575/F1575M-21 Standard Test Method for Determining Bending Yield Moment of Nails

F2590-06(2022) Standard Specification for Bearing, Roller, Thrust, Two Channeled Race Surface, Rigid or Flat Seat Type

F3359/F3359M-21 Standard Test Method for Determining Bending Yield Moment of Staples

F2591-06(2022) Standard Specification for Bearing, Roller, Tapered, Single Row of Rollers (Metric Series)

F1667/F1667M-21a Standard Specification for Driven Fasteners: Nails, Spikes, and Staples

A574-21 Standard Specification for Alloy Steel Socket-Head Cap Screws

F1097-17(2022) Standard Specification for Mortar, Refractory (High-Temperature, Air-Setting)

F1145-05(2022) Standard Specification for Turnbuckles, Swaged, Welded, Forged

A217/A217M-22 Standard Specification for Steel Castings, Martensitic Stainless and Alloy, for Pressure-Containing Parts, Suitable for High-Temperature Service

A469/A469M-07(2022) Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors

A472/A472M-07(2022) Standard Specification for Heat Stability of Steam Turbine Shafts and Rotor Forgings

A485-17(2022) Standard Specification for High Hardenability Antifriction Bearing Steel

A494/A494M-22 Standard Specification for Castings, Nickel and Nickel Alloy

A534-17(2022) Standard Specification for Carburizing Steels for Anti-Friction Bearings

A711/A711M-17(2022) Standard Specification for Steel Forging Stock

A739-90a(2022) Standard Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both

A756-17(2022) Standard Specification for Stainless Anti-Friction Bearing Steel

A604/A604M-07(2022) Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets

A646/A646M-17(2022) Standard Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings

A952/A952M-02(2022) Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links

A906/A906M-02(2022) Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting

A837/A837M-17(2022) Standard Specification for Steel Forgings, Alloy, for Carburizing Applications

A624/A624M-22 Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced

A626/A626M-22 Standard Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced

A789/A789M-22 Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service

A790/A790M-22 Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Pipe

A563/A563M-21ae1 Standard Specification for Carbon and Alloy Steel Nuts (Inch and Metric)

A209/A209M-03(2022) Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes

A1053/A1053M-12(2022) Standard Specification for Welded Ferritic-Martensitic Stainless Steel Pipe

A623-22 Standard Specification for Tin Mill Products, General Requirements

A623M-22 Standard Specification for Tin Mill Products, General Requirements [Metric]

A1103/A1103M-16(2022) Standard Specification for Seamless Cold-Finished Carbon Steel Structural Frame Tubing for Automotive Racing Applications

A879/A879M-22 Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface

A705/A705M-22 Standard Specification for Age-Hardening Stainless Steel Forgings

A921/A921M-93(2022) Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging

F1757-96(2022) Standard Guide for Digital Communication Protocols for Computerized Systems

F1716-96(2022) Standard Guide for Transition and Performance of Marine Software Systems Maintenance

F2001-15(2022) Standard Guide for Vessel-Related Technical Information for Use in Developing an Electronic Database and Ship Safety Record

F2017-15(2022) Standard Guide for Database Structure of Electronic Data Interchange Between Ship Owner and Shipyard for Contract Administration

F2218-02(2022) Standard Guide for Hardware Implementation for Computerized Systems

F2192-05(2022) Standard Test Method for Determining and Reporting the Berthing Energy and Reaction of Marine Fenders

A116-22 Standard Specification for Metallic-Coated, Steel-Woven Wire Fence Fabric

A121-22 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire

A475-22 Standard Specification for Metallic-Coated Steel Wire Strand

F1178-11(2022) Standard Specification for Performance of Enameling System, Baking, Metal Joiner Work and Furniture

F822-22 Standard Specification for Chest of Drawers (Chiffonier), Steel, Marine

F823-22 Standard Specification for Desk, Log, Marine, Steel, with Cabinet

F824-22 Standard Specification for Tables, Mess, Marine, Steel

F825-22 Standard Specification for Drawers, Furniture, Marine, Steel

F826-22 Standard Specification for Tops, Furniture, Marine, Steel

F1018-22 Standard Specification for Steel Emergency Gear Stowage Locker

A48/A48M-22 Standard Specification for Gray Iron Castings

A991/A991M-22 Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products

A702-22 Standard Specification for Steel Fence Posts, Hot Wrought

A1066/A1066M-22 Standard Specification for High-Strength Low-Alloy Structural Steel Plate Produced by Thermo-Mechanical Controlled Process (TMCP)

A941-22a Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys

A181/A181M-22 Standard Specification for Carbon Steel Forgings, for General-Purpose Piping

A411-08(2022) Standard Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire

A854/A854M-08(2022) Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire

A668/A668M-22 Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use

A798/A798M-22 Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications

A1108-17(2022) Standard Test Method for Determining the Ultimate Strength of Deep Corrugated Structural Plate Bolted Longitudinal Lapped Seams

A1084-15a(2022) Standard Test Method for Detecting Detrimental Phases in Lean Duplex Austenitic/Ferritic Stainless Steels

A268/A268M-22 Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service

A962/A962M-22 Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range

A923-22 Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels

C1173-22 Standard Specification for Flexible Transition Couplings for Underground Piping Systems

F547-22 Standard Terminology of Nails for Use with Wood and Wood-Base Materials

F3125/F3125M-22 Standard Specification for High Strength Structural Bolts and Assemblies, Steel and Alloy Steel, Heat Treated, Inch Dimensions 120 ksi and 150 ksi Minimum Tensile Strength, and Metric Dimensions 830 MPa and 1040 MPa Minimum Tensile Strength

F1337-22 Standard Practice for Human Systems Integration Program Requirements for Ships and Marine Systems, Equipment, and Facilities

F765-93(2022) Standard Specification for Wildcats, Ship Anchor Chain

F992-17(2022) Standard Specification for Valve Label Plates

F885-84(2022) Standard Specification for Envelope Dimensions for Bronze Globe Valves NPS 14 to 2

F3257-17(2022) Standard Guide for Design, Construction, and Operation of Vessels Providing Accommodation Service to Offshore Installations

F1455-92(2022) Standard Guide for Selection of Structural Details for Ship Construction

A615/A615M-22 Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement

A706/A706M-22 Standard Specification for Deformed and Plain Low-Alloy Steel Bars for Concrete Reinforcement

A1096/A1096M-22 Standard Test Method for Evaluating Bond of Individual Steel Wire, Indented or Plain, for Concrete Reinforcement

F718-22 Standard Specification for Shipbuilders and Marine Paints and Coatings Product/Procedure Data Sheet

F1331-22 Standard Practice for Installation Procedures of Vinyl Deck Coverings on Portable Plates in Electrical and Electronic Spaces

F2876-22 Standard Practice for Thermal Rating and Installation of Internal Combustion Engine Packages for use in Hazardous Locations in Marine Applications

A1122/A1122M-22 Standard Test Method for Bend Testing of Metallic-Coated Steel Sheet to Evaluate Coating Adhesion

A53/A53M-22 Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless

F2246-06(2022) Standard Specification for Bearing, Roller, Needle: Thick Outer Ring With Rollers and Cage

F2332-06(2022) Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components

F2489-06(2022) Standard Guide for Instrument and Precision Bearing Lubricants—Part 2 Greases

F2661-07(2022) Standard Test Method for Determining the Tribological Behavior and the Relative Lifetime of a Fluid Lubricant using the Spiral Orbit Tribometer

F3558-22 Standard Guide for Chain-Link Pickleball Court Fences

F812-12(2022) Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series

A1007-22 Standard Specification for Carbon Steel Wire for Wire Rope

F1122-22 Standard Specification for Quick Disconnect Couplings (6 in. NPS and Smaller)

A355-89(2022) Standard Specification for Steel Bars, Alloys, for Nitriding

A681-08(2022) Standard Specification for Tool Steels Alloy

A696-17(2022) Standard Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components

A729/A729M-17(2022) Standard Specification for Carbon and Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service

A765/A765M-07(2022) Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements

A1040-17(2022) Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels

A1075-12(2022) Standard Specification for Flanged Steel U-Channel Posts

A484/A484M-22 Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings

A788/A788M-22a Standard Specification for Steel Forgings, General Requirements

A480/A480M-22a Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

A555/A555M-22 Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods

A595/A595M-22 Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use

A139/A139M-22 Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)

A778/A778M-22 Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products

A1097/A1097M-22 Standard Specification for Steel Casing Pipe, Carbon, Electric-Fusion (Arc)-Welded (NPS 10 and Larger)

A820/A820M-22 Standard Specification for Steel Fibers for Fiber-Reinforced Concrete

A992/A992M-22 Standard Specification for Structural Steel Shapes

A956/A956M-22 Standard Test Method for Leeb Hardness Testing of Steel Products

A204/A204M-17(2022) Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum

A514/A514M-22 Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding

A225/A225M-17(2022) Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel

A299/A299M-17(2022) Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon

A302/A302M-17(2022) Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel

A353/A353M-17(2022) Standard Specification for Pressure Vessel Plates, Alloy Steel, Double-Normalized and Tempered 9 % Nickel

A515/A515M-17(2022) Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service

A645/A645M-10(2022) Standard Specification for Pressure Vessel Plates, 5 % and 51 2 % Nickel Alloy Steels, Specially Heat Treated

A693-22 Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

A635/A635M-22 Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for

A688/A688M-18(2022) Standard Specification for Seamless and Welded Austenitic Stainless Steel Feedwater Heater Tubes

A694/A694M-16(2022) Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service

A733-16(2022) Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples

A1098/A1098M-18(2022) Standard Specification for Welded Austenitic, Ferritic, Martensitic and Duplex Stainless Steel Boiler, Superheater, Condenser, and Heat Exchanger Tubes with Textured Surface(s)

A1100-16(2022) Standard Guide for Qualification and Control of Induction Heat Treating

A439/A439M-18(2022) Standard Specification for Austenitic Ductile Iron Castings

A476/A476M-00(2022) Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls

A518/A518M-99(2022) Standard Specification for Corrosion-Resistant High-Silicon Iron Castings

A602-94(2022) Standard Specification for Automotive Malleable Iron Castings

A667/A667M-87(2022) Standard Specification for Centrifugally Cast Dual Metal (Gray and White Cast Iron) Cylinders

A897/A897M-22 Standard Specification for Austempered Ductile Iron Castings

A338-84(2022) Standard Specification for Malleable Iron Flanges, Pipe Fittings, and Valve Parts for Railroad, Marine, and Other Heavy-Duty Service at Temperatures Up to 650 °F (345 °C)

A395/A395M-99(2022) Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures

A842-11A(2022)e1 Standard Specification for Compacted Graphite Iron Castings

A47/A47M-99(2022)e1 Standard Specification for Ferritic Malleable Iron Castings

A220/A220M-99(2022)e1 Standard Specification for Pearlitic Malleable Iron

A377-18(2022)e1 Standard Index of Specifications for Ductile Iron Pressure Pipe

A716-18(2022) Standard Specification for Ductile Iron Culvert Pipe

A746-18(2022) Standard Specification for Ductile Iron Gravity Sewer Pipe

A748/A748M-87(2022) Standard Specification for Statically Cast Chilled White Iron-Gray Iron Dual Metal Rolls for Pressure Vessel Use

A874/A874M-98(2022) Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service

A942/A942M-95(2022) Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion-Resistant Roll Shells

F721-18(2022) Standard Specification for Gauge Piping Assemblies

F856-97(2022) Standard Practice for Mechanical Symbols, Shipboard—Heating, Ventilation, and Air Conditioning (HVAC)

F722-18(2022) Standard Specification for Welded Joints for Shipboard Piping Systems

F986-86(2022) Standard Specification for Suction Strainer Boxes

F994-86(2022) Standard Specification for Design and Installation of Overboard Discharge Hull Penetration Connections

F998-12(2022) Standard Specification for Centrifugal Pump, Shipboard Use

F1006-86(2022) Standard Specification for Entrainment Separators for Use in Marine Piping Applications

F1007-18(2022) Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application

F1020-86(2022) Standard Specification for Line-Blind Valves for Marine Applications

F1507-99(2022) Standard Specification for Surge Suppressors for Shipboard Use

F2046-00(2022) Standard Specification for Tachometers, Various

F2070-00(2022) Standard Specification for Transducers, Pressure and Differential, Pressure, Electrical and Fiber-Optic

F2071-00(2022) Standard Specification for Switch, Position Proximity (Noncontact) or Limit (Mechanical Contact), Fiber-Optic

F681-82(2022) Standard Practice for Use of Branch Connections

F704-81(2022) Standard Practice for Selecting Bolting Lengths for Piping System Flanged Joints

F708-92(2022) Standard Practice for Design and Installation of Rigid Pipe Hangers

A522/A522M-22 Standard Specification for Forged or Rolled 8 and 9% Nickel Alloy Steel Flanges, Fittings, Valves, and Parts for Low-Temperature Service

A587-22 Standard Specification for Electric-Resistance-Welded Low-Carbon Steel Pipe for the Chemical Industry

A674-22 Standard Practice for Polyethylene Encasement for Ductile Iron Pipe

A775/A775M-22 Standard Specification for Epoxy-Coated Steel Reinforcing Bars

A1055/A1055M-22 Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars

A1078/A1078M-22 Standard Specification for Epoxy-Coated Steel Dowels for Concrete Pavement

A934/A934M-22 Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars

A463/A463M-22 Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process

A581/A581M-22a Standard Specification for Free-Machining Stainless Steel Wire and Wire Rods

A924/A924M-22a Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process

A582/A582M-22 Standard Specification for Free-Machining Stainless Steel Bars

A1046/A1046M-22 Standard Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process

A1063/A1063M-22 Standard Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process

A653/A653M-22 Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process

A792/A792M-22 Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process

A875/A875M-22 Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process

A392-11a(2022) Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric

A491-11(2022) Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric

A824-01(2022) Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence

A944-22 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens

A1105-17(2022) Standard Specification for Corrugated Steel Manhole Assemblies

A1107/A1107M-17(2022) Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated Steel Drainage Pipes

F668-17(2022) Standard Specification for Polyvinyl Chloride (PVC), Polyolefin and Other Polymer-Coated Steel Chain Link Fence Fabric

F934-96(2022) Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials

F1043-18(2022) Standard Specification for Strength and Protective Coatings on Steel Industrial Fence Framework

F1083-18(2022) Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures

F1183-96(2022) Standard Specification for Aluminum Alloy Chain Link Fence Fabric

F1379-95(2022) Standard Terminology Relating to Barbed Tape

F1553-11(2022) Standard Guide for Specifying Chain Link Fence

A1111-22 Standard Specification for Cast Iron Closet Flanges for Use with Cast Iron Soil Pipe and Fittings in Gravity Flow Plumbing Drain, Waste, and Vent Sanitary Applications

A370-22 Standard Test Methods and Definitions for Mechanical Testing of Steel Products

A1109-22 Standard Specification for Special Fittings for Single-Stack Hubless Cast Iron Soil Pipe Fittings for Sanitary, Waste, and Vent Piping Applications

F1664-08(2022) Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence

F1665-08(2022) Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence

F1910-98(2022) Standard Specification for Long Barbed Tape Obstacles

F3000/F3000M-13(2022) Standard Specification for Polymer Privacy Insert Slats for Chain Link Fabric and Privacy Chain Link Fabric Manufactured Containing Pre-Installed Privacy Slats

A951/A951M-22 Standard Specification for Steel Wire for Masonry Joint Reinforcement

A1022/A1022M-22a Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement

A1044/A1044M-22a Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete

A1060/A1060M-22 Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete

A240/A240M-22b Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications

A1064/A1064M-22 Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete

A385/A385M-22 Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)

A234/A234M-22 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service

A320/A320M-22a Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service

A335/A335M-22 Standard Specification for Seamless Ferritic Alloy-Steel Pipe for High-Temperature Service

A193/A193M-22a Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications

A376/A376M-22 Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Service

A787/A787M-22 Standard Specification for Electric-Resistance-Welded Metallic-Coated Carbon Steel Mechanical Tubing

A860/A860M-22 Standard Specification for Wrought High-Strength Ferritic Steel Butt-Welding Fittings

A757/A757M-22 Standard Specification for Steel Castings, Ferritic and Martensitic, for Pressure-Containing and Other Applications, for Low-Temperature Service

A1119/A1119M-22 Standard Specification for Welded Partially Corrugated Tube for Potable Water and General Service

A213/A213M-22a Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes

F1789-22 Standard Terminology for F16 Mechanical Fasteners

A898/A898M-17(2022) Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes

F2328-17(2022) Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts

F2328M-17(2022) Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws, Studs, and Nuts (Metric)

A659/A659M-22 Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled

A420/A420M-22 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service

A815/A815M-22 Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings

A269/A269M-22 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service

A312/A312M-22a Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes

A403/A403M-22b Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings

A1123/A1123M-22 Standard Specification for Carbon Steel Laser and Laser-Hybrid Welded, Sharp-Cornered Profile (SCP), Built-Up, Square, Rectangular, and Special Shape Tube

A182/A182M-22a Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

A194/A194M-22a Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both

A1085/A1085M-22 Standard Specification for Cold-Formed Welded Carbon Steel Hollow Structural Sections (HSS)

A553/A553M-22 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 7 %, 8 %, and 9 % Nickel

F593-22 Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs

F594-22 Standard Specification for Stainless Steel Nuts

A6/A6M-22 Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling

F3131-14(2023) Standard Specification for Epoxy / Cotton Raw Materials for the Use in Bearing Cages

F3256-23 Standard Guide for Reporting and Recording of Near-Misses for Maritime Industry