ASTM Volume 06.02, February 2024

Table of Contents

D2243-20 Standard Test Method for Freeze-Thaw Resistance of Water-Borne Coatings

D1308-20 Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Coating Systems

D8331/D8331M-20 Standard Test Method for Measurement of Film Thickness of Thin-Film Coatings by Non-Destructive Means Using Ruggedized Optical Interference

C267-20 Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes

D6279-20 Standard Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings

D8162-20a Standard Test Method for Determination of the Apparent Viscosity of Thermoplastic Pavement Marking Materials using a Rotational Viscometer with Temperature Control Heating Unit

D7073-20 Standard Guide for Application and Evaluation of Brush and Roller Applied Paint Films

D2199-03(2021) Standard Test Method for Measurement of Plasticizer Migration From Vinyl Fabrics to Lacquers

D333-01(2021) Standard Guide for Clear and Pigmented Lacquers

D4538-21 Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities

D868-21 Standard Practice for Determination of Degree of Bleeding of Traffic Paint

D8271-21 Standard Test Method for the Direct Measurement of Surface Profile of Prepared Concrete

D4417-21 Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel

D7270-07(2021) Standard Guide for Environmental and Performance Verification of Factory-Applied Liquid Coatings

D5327-97(2021)e1 Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions

D5064-16a(2021) Standard Practice for Conducting a Patch Test to Assess Coating Compatibility

G13/G13M-21 Standard Test Method for Impact Resistance of Pipeline Coatings(Limestone Drop Test)

D7491-21 Standard Guide for Management of Non-Conforming Coatings in Coating Service Level I Areas of Nuclear Power Plants

D4946-89(2017) Standard Test Method for Blocking Resistance of Architectural Paints

D5403-93(2021) Standard Test Methods for Volatile Content of Radiation Curable Materials

D4242-07(2017) Standard Test Method for Inclined Plate Flow for Thermosetting Coating Powders

D5959-12(2017) Standard Test Method for Bulk Density of Level Paintbrush Filaments

D5861-07(2017) Standard Guide for Significance of Particle Size Measurements of Coating Powders

D5382-02(2017) Standard Guide to Evaluation of Optical Properties of Powder Coatings

D7233-08(2017) Standard Test Method for Testing Fracture of Level Paintbrush Filaments

D6737-12(2017) Standard Test Method for Bulk Density of Tapered Paintbrush Filaments

D2486-17 Standard Test Methods for Scrub Resistance of Wall Paints

D4618-92(2017) Standard Specification for Design and Fabrication of Flue Gas Desulfurization System Components for Protective Lining Application

D7602-11(2017) Standard Practice for Installation of Vulcanized Rubber Linings

D4217-07(2017) Standard Test Method for Gel Time of Thermosetting Coating Powder

D3928-00a(2018) Standard Test Method for Evaluation of Gloss or Sheen Uniformity

G42-11(2019)e1 Standard Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to Elevated Temperatures

D4619-12(2018) Standard Practice for Inspection of Linings in Operating Flue Gas Desulfurization Systems

D4537-12(2018) Standard Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating and Lining Work Inspection in Nuclear Facilities

D5498-12a(2018) Standard Guide for Developing a Training Program for Personnel Performing Coating and Lining Work Inspection for Nuclear Facilities

D7167-12(2018) Standard Guide for Establishing Procedures to Monitor the Performance of Safety-Related Coating Service Level III Lining Systems in an Operating Nuclear Power Plant

D6137-97(2018) Standard Test Method for Sulfuric Acid Resistance of Polymer Linings for Flue Gas Desulfurization Systems

D6957-12(2018) Standard Practice for Measuring Curl in Paint Brush Filling Material

D4400-18 Standard Test Method for Sag Resistance of Paints Using a Multinotch Applicator

C904-01(2018) Standard Terminology Relating to Chemical-Resistant Nonmetallic Materials

D7108-12(2018) Standard Guide for Establishing Qualifications for a Nuclear Coatings Specialist

D5146-10(2019) Standard Guide to Testing Solvent-Borne Architectural Coatings

D4040-10(2019) Standard Test Method for Rheological Properties of Paste Printing and Vehicles by the Falling-Rod Viscometer

D6487-10(2019) Standard Practice for Preparing Prints of Paste Printing Inks Using a Hand Operated Laboratory Flat-Bed Press

D7188-05(2019) Standard Terminology for Printing Inks, Materials, and Processes

D7803-19 Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Powder Coating

D8157-19 Standard Guide for Qualification Testing of Coatings Used in Coating Service Level I in Nuclear Power Plants

D3258-04(2019) Standard Test Method for Porosity of White or Near White Paint Films by Staining

D6583-13(2019) Standard Test Method for Porosity of Paint Film by Mineral Oil Absorption

D7072-04(2019) Standard Practice for Evaluating Accelerated Efflorescence of Latex Coatings

D6736-08(2019) Standard Test Method for Burnish Resistance of Latex Paints

D6686-01(2019) Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings

D7786-13(2019) Standard Test Method for Determining Enamel Holdout

D1849-95(2019) Standard Test Method for Package Stability of Paint

G11-19 Standard Practice for Effects of Outdoor Weathering on Pipeline Coatings

D5139-19 Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants

D5965-19 Standard Test Methods for Density of Coating Powders

D5069/D5069M-13(2019) Standard Practice for Preparation of Paint-Roller Covers for Evaluation of Architectural Coatings

D5068-04(2019) Standard Practice for Preparation of Paint Brushes for Evaluation

D6337-98(2019) Standard Practice for Physical Characterization of Woven Paint Applicator Fabrics

D5913-96(2019) Standard Test Method for Evaluation of Cleanability of Paint Brushes

D4940-15(2020) Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blast Cleaning Abrasives

D6944-15(2020) Standard Practice for Determining the Resistance of Cured Coatings to Thermal Cycling

D7396-14(2020) Standard Guide for Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting

D5286-20 Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints

D1155-10(2020) Standard Test Method for Roundness of Glass Spheres

D1214-10(2020) Standard Test Method for Sieve Analysis of Glass Spheres

D4713-12(2020) Standard Test Methods for Nonvolatile Content of Heatset and Liquid Printing Ink Systems

D8330-20 Standard Specification for Artists’ Pastels

D6073-08a(2020) Standard Test Method for Relative Setting of Heatset Printing Inks

D6488-08(2020) Standard Terminology Relating to Print Problems

D6846-02(2020) Standard Practice for Preparing Prints of Paste Printing Inks with a Printing Gage

D7189-12(2020) Standard Test Method for Relative Mileage of News Ink on Newsprint

D7680-10(2020) Standard Practice for Preparing Prints of Paste Printing Inks by a Motor-Driven Printability Tester

D7539-10(2020) Standard Practice for Using a Test Chamber for Humidity Conditioning of Test Panels of Pavement Marking Paints

D7734/D7734M-13(2020) Standard Test Method for Determination of Open Time of Oxidative Printing Inks and Overprint Varnishes by a Manual Method

D2067-97(2020) Standard Test Method for Coarse Particles in Printing Ink Dispersions

D2066-07(2020) Standard Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions

G9-07(2020) Standard Test Method for Water Penetration into Pipeline Coatings

D3623-78a(2020) Standard Test Method for Testing Antifouling Panels in Shallow Submergence

D1316-20 Standard Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer

D4942-20 Standard Test Methods for Water Pickup of Lithographic Printing Inks and Vehicles in a Laboratory Mixer

D5909-20 Standard Test Method for Drying Time of Oxidative-Drying Printing Inks by Squalene Resistance

D7244-20 Standard Test Method for Relative Cure of Energy-Cured Inks and Coatings

D6688-20 Standard Practice for Relative Resistance of Printed Matter to Liquid Chemicals by a Sandwich Technique

D6442-06(2020) Standard Test Method for Determination of Copper Release Rate From Antifouling Coatings in Substitute Ocean Water

D6903-07(2020) Standard Test Method for Determination of Organic Biocide Release Rate From Antifouling Coatings in Substitute Ocean Water

D4939-89(2020) Standard Test Method for Subjecting Marine Antifouling Coating to Biofouling and Fluid Shear Forces in Natural Seawater

G18-07(2020) Standard Test Method for Joints, Fittings, and Patches in Coated Pipelines

D5479-94(2020) Standard Practice for Testing Biofouling Resistance of Marine Coatings Partially Immersed

D6990-20 Standard Practice for Evaluating Biofouling Resistance and Physical Performance of Marine Coating Systems

D5618-20 Standard Test Method for Measurement of Barnacle Adhesion Strength in Shear

D2205-20 Standard Guide for Selection of Tests for Traffic Paints

D7971-20 Standard Guide for Measuring Roundness of Glass Spheres Using a Flowing Stream Digital Image Analyzer

D913-20 Standard Practice for Evaluating Degree of Pavement Marking Line Wear

D4960-20 Standard Test Method for Evaluation of Color for Thermoplastic Pavement Marking Materials

D8008-20 Standard Practice for Representative Field Sampling of Traffic Paints

D4828-94(2020) Standard Test Methods for Practical Washability of Organic Coatings

D6900-10(2020) Standard Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate

D3450-15(2020) Standard Test Method for Washability Properties of Interior Architectural Coatings

D7393-16(2020) Standard Practice for Indicating Oil in Abrasives

D8160-20 Standard Test Method for Un-notched Cantilever Beam Impact Resistance (Izod Impact) Testing of Thermoplastic Pavement Marking Materials

D7089-06(2021) Standard Practice for Determination of the Effectiveness of Anti-Graffiti Coating for Use on Concrete, Masonry and Natural Stone Surfaces by Pressure Washing

D3843-16(2021)e1 Standard Practice for Quality Assurance for Protective Coatings Applied to Nuclear Facilities

D5367-16(2021) Standard Practice for Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used to Prevent Flash Rusting of Steel When Water or Water/Abrasive Blasted

D7230-06(2021) Standard Guide for Evaluating Polymeric Lining Systems for Water Immersion in Coating Service Level III Safety-Related Applications on Metal Substrates

D3911-16(2021) Standard Test Method for Evaluating Coatings Used in Light-Water Nuclear Power Plants at Simulated Design Basis Accident (DBA) Conditions

D4286-08(2021) Standard Practice for Determining Coating Contractor Qualifications for Nuclear Powered Electric Generation Facilities

D5144-08(2021) Standard Guide for Use of Protective Coating Standards in Nuclear Power Plants

D5499-94(2021) Standard Test Methods for Heat Resistance of Polymer Linings for Flue Gas Desulfurization Systems

D5163-16(2021) Standard Guide for Establishing a Program for Condition Assessment of Coating Service Level I Coating Systems in Nuclear Power Plants

D7305-08a(2020) Standard Test Method for Reflection Density of Printed Matter

D4302-14(2021) Standard Specification for Artists’ Oil, Resin-Oil, and Alkyd Paints

D5065-17(2021) Standard Guide for Assessing the Condition of Aged Coatings on Steel Surfaces

D4941-06(2021) Standard Practice for Preparing Drawdowns of Artists’ Paste Paints

D5067-16(2021) Standard Specification for Artists' Watercolor Paints

D2200-17(2021) Standard Practice for Use of Pictorial Surface Preparation Standards and Guides for Painting Steel Surfaces

D4236-94(2021) Standard Practice for Labeling Art Materials for Chronic Health Hazards

D5098-16(2021) Standard Specification for Artists' Acrylic Dispersion Paints

D5383-16(2021) Standard Practice for Visual Determination of the Lightfastness of Art Materials by Artists and Art Technologists

D5724-16(2021) Standard Specification for Gouache Paints

D6206-09(2021) Standard Practice for Sampling of Coating Films

D6801-07(2021) Standard Test Method for Measuring Maximum Spontaneous Heating Temperature of Art and Other Materials

D7307-21 Standard Practice for Sampling of Thermoplastic Pavement Marking Materials

D3276-21 Standard Guide for Painting Inspectors (Metal Substrates)

D6676/D6676M-21 Standard Test Method for Cathodic Disbonding of Exterior Pipeline Coatings at Elevated Temperatures Using Interior Heating

D6901-15(2021) Standard Specification for Artists' Colored Pencils

D6906-12a(2021) Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence

D7733-12(2021) Standard Specification for Acrylic Dispersion Ground

D7681-11(2021) Standard Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer

D7952-15(2021) Standard Test Method for Measuring Aspiration Potential of Aerosol Products

D7868-21 Standard Practice for Determining the Dry Fall (Fog) Properties of Protective Coatings

D5517-14(2021) Standard Test Method for Determining Extractability of Metals from Art Materials

D8424-21 Standard Guide for Retroreflective Composite Optics Laboratory Procedures

D8367-21 Standard Practice for Making a Laboratory Pavement Marking Sample Using a Pavement Marking and Drop-on Particles

D1734-93(2022) Standard Practice for Making Cementitious Panels for Testing Coatings

D5095-91(2022) Standard Test Method for Determination of the Nonvolatile Content in Silanes, Siloxanes and Silane-Siloxane Blends Used in Masonry Water Repellent Treatments

D5107-03(2022) Standard Practice for Preparatory Surface Cleaning of Architectural Sandstone

D5860-95(2022) Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens

D6904-03(2022) Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry

D5703-95(2022)e1 Standard Practice for Preparatory Surface Cleaning for Clay Brick Masonry

D7787/D7787M-13(2022) Standard Practice for Selecting Wood Substrates for Weathering Evaluations of Architectural Coatings

D5326-22 Standard Test Method for Color Development in Tinted Latex Paints

D6386-22 Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting

D8370-22 Standard Test Method for Field Measurement of Electrochemical Impedance on Coatings and Linings

D6492-99(2022) Standard Practice for Detection of Hexavalent Chromium On Zinc and Zinc/Aluminum Alloy Coated Steel

D6532-00(2022) Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens

D7376-10a(2022) Standard Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals

D7682-17(2022) Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty

D6490-99(2022) Standard Test Method for Water Vapor Transmission of NonFilm Forming Treatments Used on Cementitious Panels

D3794-22 Standard Guide for Testing Coil Coatings

D3170/D3170M-14(2022) Standard Test Method for Chipping Resistance of Coatings

D4541-22 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers

D7639-22 Standard Test Method for Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence

D6189-97(2022) Standard Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings

D6763-16(2022) Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents

D3730-17(2022) Standard Guide for Testing High-Performance Interior Architectural Wall Coatings

D5324-16(2022) Standard Guide for Testing Water-Borne Architectural Coatings

D5401-03(2022) Standard Test Method for Evaluating Clear Water Repellent Coatings on Wood

D4796-17(2022) Standard Test Method for Bond Strength of Thermoplastic Pavement Marking Materials

D2792-17(2022) Standard Practice for Solvent and Fuel Resistance of Traffic Paint

D4797-17(2022) Standard Test Methods for Gravimetric Analysis of White and Yellow Thermoplastic Pavement Marking

D5702-18(2022) Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals

D6677-18(2022) Standard Test Method for Evaluating Adhesion by Knife

D7234-22 Standard Test Method for Pull-Off Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers

D7308-17(2022) Standard Practice for Sample Preparation of Thermoplastic Pavement Marking Materials

D7514-14(2022) Standard Test Method for Evaluating Ink Stainblocking of Architectural Paint Systems by Visual Assessment

D7735-17(2022) Standard Test Method for Type A Durometer Hardness Testing of Thermoplastic Pavement Marking at Elevated Temperatures

D8161-17(2022) Standard Test Method for Impact Resistance of Thermoplastic Pavement Marking Materials over a Highway Substrate by Means of a Striker Impacted by a Falling Weight

D3003-01(2022) Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates

D4145-10(2022) Standard Test Method for Coating Flexibility of Prepainted Sheet

D4146-10(2022) Standard Test Method for Formability of Zinc-Rich Primer/Chromate Complex Coatings on Steel

D4303-10(2022) Standard Test Methods for Lightfastness of Colorants Used in Artists' Materials

D6491-09(2023) Standard Practice for Evaluation of Aging Resistance of Prestressed Prepainted Metal In a Dry Heat Test

D4258-23 Standard Practice for Surface Cleaning Concrete for Coating

D4260-23 Standard Practice for Liquid and Gelled Acid Etching of Concrete

D3912-10(2023) Standard Test Method for Chemical Resistance of Coatings and Linings for Use in Nuclear Power Plants

D4082-10(2023) Standard Test Method for Effects of Gamma Radiation on Coatings for Use in Nuclear Power Plants

D4227-05(2023) Standard Practice for Qualification of Coating Applicators for Application of Coatings to Concrete Surfaces

D4228-05(2023) Standard Practice for Qualification of Coating Applicators for Application of Coatings to Steel Surfaces

D8104-17(2023) Standard Guide for Determining Coating Qualification Test Data Applicability

D365-23 Standard Guide for Soluble Nitrocellulose Base Solutions

C307-23 Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings

C579-23 Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

C580-18(2023) Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

C722-18(2023) Standard Specification for Chemical-Resistant Monolithic Floor Surfacings

C1486-18(2023) Standard Practice for Testing Chemical-Resistant Broadcast and Slurry-Broadcast Resin Monolithic Floor Surfacings

C308-18(2023) Standard Practice for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars

C413-18(2023) Standard Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

D3260-01(2023) Standard Test Method for Acid and Mortar Resistance of Factory-Applied Clear Coatings on Extruded Aluminum Products

D5009-02(2023) Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions

D5066-91(2023) Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints—Weight Basis

D3322-23 Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal

D3732-23 Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings

D711-23 Standard Test Method for No-Pick-Up Time of Pavement Markings

D6486-23 Standard Practice for Short Term Vehicle Service Exposure of Automotive Coatings

D713-23 Standard Practice for Conducting Road Service Tests on Fluid Traffic Marking Materials

D7088-17(2023) Standard Practice for Resistance to Hydrostatic Pressure for Coatings Used in Below Grade Applications Applied to Masonry

D8163-18(2023) Standard Test Method for Determination of Strength of Colorants and Bases for Architectural, Marine, Maintenance, Commercial, and Industrial Coatings

D6419-00(2023) Standard Test Method for Volatile Content of Sheet-Fed and Coldset Web Offset Printing Inks

D7835/D7835M-23 Standard Test Method for Determining the Solvent Resistance of an Organic Coating Using a Mechanical Rubbing Machine

G62-23 Standard Test Methods for Holiday Detection of Coatings used to Protect Pipelines

C531-18(2023) Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

D4147-18(2023) Standard Practice for Applying Coil Coatings Using Wire-Wound Drawdown Bars

D7190-10(2023) Standard Practice to Evaluate Leaching of Water-Soluble Materials from Latex Paint Films

D7377-09(2023) Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints using a Water Faucet

D7538-09(2023) Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints Using an Atomizing Spray Device

D2064-24 Standard Test Method for Print Resistance of Architectural Paints

D4213-24 Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss

D4958-24 Standard Test Method for Comparison of the Brush Drag of Latex Paints

D2091-96(2024) Standard Test Method for Print Resistance of Lacquers

D2793-99(2024) Standard Test Method for Block Resistance of Organic Coatings on Wood Panel Substrates

D2921-98(2024) Standard Test Method for Qualitative Tests for the Presence of Water Repellents and Preservatives in Wood Products

D3023-98(2024) Standard Practice for Determination of Resistance of Factory-Applied Coatings on Wood Products to Stains and Reagents

D5235-18(2024) Standard Test Method for Microscopic Measurement of Dry Film Thickness of Coatings on Wood Products

D5301-92(2024) Standard Practice for Physical Characterization of Paint Brushes

G8-24 Standard Test Methods for Cathodic Disbonding of Coated Steel

D5795-16(2024) Standard Test Method for Determination of Liquid Water Absorption of Coated Wood and Wood Based Products Via “Cobb Ring” Apparatus

D6441-05(2024) Standard Test Methods for Measuring the Hiding Power of Powder Coatings

D7378-16(2024) Standard Practice for Measurement of Thickness of Applied Coating Powders to Predict Cured Thickness

D7488-11(2024) Standard Test Method for Open Time of Latex Paints

D7802-12(2024) Standard Terminology for Paint Roller Application Tools

D6665-24 Standard Practice for Evaluation of Aging Resistance of Pre-stressed Prepainted Metal in a Boiling Water Test

D2065-24 Standard Test Method for Determination of Edge Performance of Composite Wood Products Under Surfactant Accelerated Moisture Stress

D8555-24 Standard Practice for Conducting a Coating/Lining Detachment Acoustical Sounding (Tapping) Inspection

D4263-24 Standard Practice for Indicating Moisture in Concrete by the Plastic Sheet Method

D4261-05(2024) Standard Practice for Surface Cleaning Concrete Masonry Units for Coating

D4262-05(2024) Standard Test Method for pH of Chemically Cleaned or Etched Concrete Surfaces

D4752-20(2024) Standard Practice for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub

D5402-19(2024) Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs

D6943-15(2024) Standard Practice for Immersion Testing of Industrial Protective Coatings and Linings

D7055-19(2024) Standard Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings

G6-07(2024) Standard Test Method for Abrasion Resistance of Pipeline Coatings

G10-10(2024) Standard Test Method for Specific Bendability of Pipeline Coatings

G17-07(2024) Standard Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod)

G20-10(2024) Standard Test Method for Chemical Resistance of Pipeline Coatings

D4062-24 Standard Test Method for Leveling of Paints by Draw-Down Method

D4285-24 Standard Practice for Indicating Oil or Water in Compressed Air

D5181-24 Standard Practice for Abrasion Resistance of Printed Matter by the GA-CAT Comprehensive Abrasion Tester

D4787-24 Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates

D6237-24 Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)

D6531-24 Standard Practice for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement

G14-04(2024) Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)

G55-07(2024) Standard Test Method for Evaluating Pipeline Coating Patch Materials

D2967-24 Standard Test Method for Corner Coverage of Powder Coatings

D3451-24 Standard Guide for Testing Coating Powders and Powder Coatings

D7306-24 Standard Practice for Testing Low Temperature Film-Formation of Latex Paints by Visual Observation

D5796-24 Standard Test Method for Measurement of Dry Film Thickness of Thin-Film Coil-Coated Systems by Destructive Means Using a Boring Device

D8584-24 Standard Guide for Testing of Preformed Thermoplastic Pavement Marking Material in the Laboratory and Installed Preformed Thermoplastic Pavement Markings in the Field

D7054-04(2024) Standard Specification for Cautionary Labeling of Extension Poles For Use With Paint Applicators Distributed In North America

D7804-12(2024) Standard Test Method for Fiber Shedding of Paint Roller Covers

D7801-17(2024) Standard Terminology for Paint Brush Application Tools

D7834-13(2024) Standard Test Method for Filling Material Shedding of Paint Brushes

D5150-24 Standard Test Method for Hiding Power of Architectural Paints Applied by Roller

D5162-24 Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates

D6577-24a Standard Guide for Testing Industrial Protective Coatings

D7489-24 Standard Practice for Evaluating Touch-Up Properties of Architectural Coatings under Various Environmental Conditions

D5007-99(2024) Standard Test Method for Wet-to-Dry Hiding Change

D6489-99(2024) Standard Test Method for Determining the Water Absorption of Hardened Concrete Treated With a Water Repellent Coating

D7093-19(2024) Standard Test Method for Formability of Thin Film Organic Coatings on Steel Over a Biaxially Stretched Dome

D6578/D6578M-13(2024) Standard Practice for Determination of Graffiti Resistance

D7893-13(2024) Standard Guide for Corrosion Test Panel Preparation, Testing, and Rating of Coil-Coated Building Products

D4707-24 Standard Test Method for Measuring Paint Spatter Resistance During Roller Application

D4259-24 Standard Practice for Preparation of Concrete by Abrasion Prior to Coating Application

D5723-95(2024) Standard Practice for Determination of Chromium Treatment Weight on Metal Substrates by X-Ray Fluorescence