ASTM Volume 05.01, February 2023

Table of Contents

D3244-21a Standard Practice for Utilization of Test Data to Determine Conformance with Specifications

D4049-20 Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray

D1403-20b Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment

D3336-20b Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures

D3603-20 Standard Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method)

D1092-20 Standard Test Method for Measuring Apparent Viscosity of Lubricating Greases

D3829-20a Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil

D2625-20 Standard Test Method for Endurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants (Falex Pin and Vee Method)

D2511-20 Standard Test Method for Thermal Shock Sensitivity of Solid Film Lubricants

D3525-20 Standard Test Method for Gasoline Fuel Dilution in Used Gasoline Engine Oils by Wide-Bore Capillary Gas Chromatography

D2421-21e1 Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis

D2161-20 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity

D1480-21 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer

D2619-21 Standard Test Method for Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method)

D3705-14(2019) Standard Test Method for Misting Properties of Lubricating Fluids

D2670-20 Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method)

D1264-18e1 Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases

D2162-21 Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards

D4045-19 Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry

D93-20 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester

D2598-21 Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis

D240-19 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter

D3427-19 Standard Test Method for Air Release Properties of Hydrocarbon Based Oils

D2158-21 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases

D3230-19 Standard Test Method for Salts in Crude Oil (Electrometric Method)

D1319-20a Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption

D3461-18 Standard Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method)

D94-07(2017) Standard Test Methods for Saponification Number of Petroleum Products

D130-19 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test

D482-19 Standard Test Method for Ash from Petroleum Products

D525-12a(2019) Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method)

D323-20a Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)

D2274-14(2019) Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)

D524-15(2019) Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products

D3120-08(2019) Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry

D92-18 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester

D2386-19 Standard Test Method for Freezing Point of Aviation Fuels

D1838-21 Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases

D91-02(2019) Standard Test Method for Precipitation Number of Lubricating Oils

D3338/D3338M-20a Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

D2982-07(2019) Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils

D3828-16a(2021) Standard Test Methods for Flash Point by Small Scale Closed Cup Tester

D1266-18 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)

D446-12(2017) Standard Specifications and Operating Instructions for Glass Capillary Kinematic Viscometers

D1250-19e1 Standard Guide for the Use of the Joint API and ASTM Adjunct for Temperature and Pressure Volume Correction Factors for Generalized Crude Oils, Refined Products, and Lubricating Oils: API MPMS Chapter 11.1

D2509-20ae1 Standard Test Method for Measurement of Load-Carrying Capacity of Lubricating Grease (Timken Method)

D893-14(2018) Standard Test Method for Insolubles in Used Lubricating Oils

D2392-15(2021) Standard Test Method for Color of Dyed Aviation Gasolines

D4047-18 Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method

D1478-20 Standard Test Method for Low-Temperature Torque of Ball Bearing Grease

D2596-20 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)

D3524-14(2020) Standard Test Method for Diesel Fuel Diluent in Used Diesel Engine Oils by Gas Chromatography

D3704-96(2017) Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion

D3702-94(2019) Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine

D61-15(2019) Standard Test Method for Softening Point of Pitches (Cube-in-Water Method)

D2269-10(2020) Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption

D2764-20 Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch

D2981-94(2019) Standard Test Method for Wear Life of Solid Film Lubricants in Oscillating Motion

D3699-19 Standard Specification for Kerosine

D4170-16 Standard Test Method for Fretting Wear Protection by Lubricating Greases

D2649-20a Standard Test Method for Corrosion Characteristics of Solid Film Lubricants

D3104-14a(2018) Standard Test Method for Softening Point of Pitches (Mettler Softening Point Method)

D2650-10(2021) Standard Test Method for Chemical Composition of Gases by Mass Spectrometry

D1217-20 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer

D2416-20 Standard Test Method for Coking Value of Tar and Pitch (Modified Conradson)

D3712-18 Standard Test Method of Analysis of Oil-Soluble Sulfonates by Liquid Chromatography

D3233-19 Standard Test Methods for Measurement of Extreme Pressure Properties of Fluid Lubricants (Falex Pin and Vee Block Methods)

D2415-20 Standard Test Method for Ash in Coal Tar and Pitch

D1742-20 Standard Test Method for Oil Separation from Lubricating Grease During Storage

D4051-10(2021) Standard Practice for Preparation of Low-Pressure Gas Blends

D2710-20 Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration

D1550-18 Standard ASTM Butadiene Measurement Tables

D341-20e1 Standard Practice for Viscosity-Temperature Equations and Charts for Liquid Petroleum or Hydrocarbon Products

D2318-20 Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch

D1404/D1404M-99(2019) Standard Test Method for Estimation of Deleterious Particles in Lubricating Grease

D1747-09(2019) Standard Test Method for Refractive Index of Viscous Materials

D2881-19 Standard Classification for Metalworking Fluids and Related Materials

D4055-04(2019) Standard Test Method for Pentane Insolubles by Membrane Filtration

D565-99(2019) Standard Test Method for Carbonizable Substances in White Mineral Oil

D2714-94(2019) Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine

D2157-18 Standard Test Method for Effect of Air Supply on Smoke Density in Flue Gases from Burning Distillate Fuels

D2603-20 Standard Test Method for Sonic Shear Stability of Polymer-Containing Oils

D2319/D2319M-20 Standard Test Method for Softening Point of Pitch (Cube-in-Air Method)

D2782-20 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method)

D943-20 Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils

D1218-21 Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids

D3339-21 Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration

D2896-21 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration

D1401-21 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids

D217-21a Standard Test Methods for Cone Penetration of Lubricating Grease

D3700-21 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder

D2268-21 Standard Test Method for Analysis of High-Purity n-Heptane and Isooctane by Capillary Gas Chromatography

D1831-21 Standard Test Method for Roll Stability of Lubricating Grease

D2783-21 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)

D4172-21 Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method)

D2878-21 Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils

D4056-21 Standard Test Method for Estimation of Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants

D2265-22 Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range

D4052-22 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter

D381-22 Standard Test Method for Gum Content in Fuels by Jet Evaporation

D1748-22 Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet

D2272-22 Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel

D1743-22 Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases

D4057-22 Standard Practice for Manual Sampling of Petroleum and Petroleum Products

D473-22 Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method

D56-22 Standard Test Method for Flash Point by Tag Closed Cup Tester

D1835-22 Standard Specification for Liquefied Petroleum (LP) Gases

D4171-22 Standard Specification for Fuel System Icing Inhibitors

D2320-98(2022)e1 Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)

D873-22 Standard Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method)

D2709-22 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge

D4048-22 Standard Test Method for Detection of Copper Corrosion from Lubricating Grease

D2276-22 Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling

D3240-22a Standard Test Method for Undissolved Water In Aviation Turbine Fuels

D3605-22 Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy

D4176-22 Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)

D3228-22 Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method

D3948-22 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer

D3237-22 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy

D3831-22 Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy

D3342-22 Standard Test Method for Dispersion Stability of New (Unused) Rolling Oil Dispersions in Water

D3343-22 Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels

D2711-22 Standard Test Method for Demulsibility Characteristics of Lubricating Oils

D2624-22 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels

D97-17b(2022) Standard Test Method for Pour Point of Petroleum Products

D1796-22 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)

D4006-22 Standard Test Method for Water in Crude Oil by Distillation

D4007-22 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)

D2532-22 Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants

D3238-22a Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method

D972-22 Standard Test Method for Evaporation Loss of Lubricating Greases and Oils

D2595-22 Standard Test Method for Evaporation Loss of Lubricating Greases Over Wide-Temperature Range

D2510-22 Standard Test Method for Adhesion of Solid Film Lubricants

D974-22 Standard Test Method for Acid and Base Number by Color-Indicator Titration

D287-22 Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer/Method)

D976-21e1 Standard Test Method for Calculated Cetane Index of Distillate Fuels

D2500-23 Standard Test Method for Cloud Point of Petroleum Products and Liquid Fuels

D2549-23 Standard Test Method for Separation of Representative Aromatics and Nonaromatics Fractions of High-Boiling Oils by Elution Chromatography

D2420-23 Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)

D2712-23 Standard Test Method for Determination of Hydrocarbon Impurities in High Purity Propylene by Gas Chromatography

D1267-23 Standard Test Method for Gauge Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method)

D1298-12b(2017)e1 Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method

D1657-22e1 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer

D874-23 Standard Test Method for Sulfated Ash from Lubricating Oils and Additives

D2163-23e1 Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography

D2880-23 Standard Specification for Gas Turbine Fuel Oils

D1552-23 Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)

D3527-23 Standard Test Method for Life Performance of Automotive Wheel Bearing Grease

D611-23 Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents

D2008-23 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products

D1318-23 Standard Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method)

D2426-23 Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography

D2593-23 Standard Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography

D1025-23 Standard Test Method for Nonvolatile Residue of Polymerization-Grade Butadiene

D1157-23 Standard Test Method for Total Inhibitor Content (TBC) of Light Hydrocarbons

D2384-23 Standard Test Methods for Traces of Volatile Chlorides in Butane-Butene Mixtures

D1093-23 Standard Test Method for Acidity of Hydrocarbon Liquids and Their Distillation Residues

D3764-23 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems

D4174-23 Standard Practice for Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems

D2266-23 Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method)

D156-23 Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)

D892-23 Standard Test Method for Foaming Characteristics of Lubricating Oils

D2962-23 Standard Practice for Calculating Volume-Temperature Correction For Coal-Tar Pitches

D4072-23 Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch

D1159-23 Standard Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration

D2890-23 Standard Test Method for Calculation of Liquid Heat Capacity of Petroleum Distillate Fuels

D3701-23 Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry

D2983-23 Standard Test Method for Low-Temperature Viscosity of Automatic Transmission Fluids, Hydraulic Fluids, and Lubricants using a Rotational Viscometer

D3242-23 Standard Test Method for Acidity in Aviation Turbine Fuel

D2887-23 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography

D2879-23 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope

D942-23a Standard Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Pressure Vessel Method

D2425-23 Standard Test Method for Hydrocarbon Types in Middle Distillates by Mass Spectrometry

D665-23 Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water

D1265-23a Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method

D86-23ae1 Standard Test Method for Distillation of Petroleum Products and Liquid Fuels at Atmospheric Pressure

D1322-24 Standard Test Method for Smoke Point of Kerosene and Aviation Turbine Fuel

D910-24 Standard Specification for Leaded Aviation Gasolines

D1094-24 Standard Test Method for Water Reaction of Aviation Fuels

D3231-24 Standard Test Method for Phosphorus in Gasoline

D4042-24 Standard Test Method for Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of Rolling Oils

D3606-24 Standard Test Method for Determination of Benzene and Toluene in Spark Ignition Fuels by Gas Chromatography

D3227-24 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)

D1500-24 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)

D3241-24 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels

D2156-09(2024) Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels

D2007-19(2024)e1 Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method

D1655-24 Standard Specification for Aviation Turbine Fuels

D445-24 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

D396-24 Standard Specification for Fuel Oils

D187-24 Standard Test Method for Burning Quality of Kerosene

D189-24 Standard Test Method for Conradson Carbon Residue of Petroleum Products

D71-24 Standard Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)

D1662-24 Standard Test Method for Active Sulfur in Cutting Oils

D2068-24 Standard Test Method for Determining Filter Blocking Tendency

D2270-24 Standard Practice for Calculating Viscosity Index from Kinematic Viscosity at 40 °C and 100 °C

D664-24 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration

D1321-24 Standard Test Method for Needle Penetration of Petroleum Waxes

D2422-24 Standard Classification of Industrial Fluid Lubricants by Viscosity System

D2892-24 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)

D2893-24 Standard Test Methods for Oxidation Characteristics of Extreme-Pressure Lubrication Oils

D2622-24 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry

D1160-24 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure

D4175-24 Standard Terminology Relating to Petroleum Products, Liquid Fuels, and Lubricants

D4054-24 Standard Practice for Evaluation of New Aviation Turbine Fuels and Fuel Additives

D3703-18(2024) Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels, Gasoline and Diesel Fuels

D975-24a Standard Specification for Diesel Fuel

D1840-24 Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry

D2502-24 Standard Test Method for Estimation of Mean Relative Molecular Mass of Petroleum Oils from Viscosity Measurements

D2713-24 Standard Test Method for Dryness of Propane (Valve Freeze Method)

D2070-24a Standard Test Method for Thermal Stability of Hydraulic Oils

D2501-24 Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils

D2889-24 Standard Test Method for Calculation of True Vapor Pressures of Petroleum Distillate Fuels

C1234-24 Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations

D128-24a Standard Test Methods for Analysis of Lubricating Grease

D2155-18(2024) Standard Test Method for Determination of Fire Resistance of Aircraft Hydraulic Fluids by Autoignition Temperature

D95-23e1 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation

D2638-24 Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer