C1791-16(2021) Standard Guide for Reduction of Efflorescence Potential in New Unit Pavement Systems
C1814/C1814M-20 Standard Test Method for Measurement of Hydraulic Characteristics of Stormwater Filtration Elements
C1504-20 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains
C1889-21 Standard Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Utility, Water, and Wastewater Structures Using AASHTO LRFD Design
C1196-20 Standard Test Method for In Situ Compressive Stress Within Solid Unit Masonry Estimated Using Flatjack Measurements
E514/E514M-20 Standard Test Method for Water Penetration and Leakage Through Masonry
C1504M-20 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric)
C1244/C1244M-20 Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill
C1478/C1478M-20 Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals
C923/C923M-20 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals
C1586-20 Standard Guide for Quality Assurance of Mortars
C655-19a Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe
C877M-21 Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections (Metric)
C877-21 Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections
C1195-21 Standard Test Method for Absorption of Architectural Cast Stone
C1731-21 Standard Specification for Concrete Floor Tile
C1790-21 Standard Specification for Fly Ash Facing Brick
C1587/C1587M-21a Standard Practice for Preparation of Field Removed Manufactured Masonry Units and Masonry Specimens for Testing
C890-21 Standard Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures
C1686-09(2017) Standard Practice for Installation and Testing of Reinforced Autoclaved Aerated Concrete (AAC) Units
C1693-11(2017) Standard Specification for Autoclaved Aerated Concrete (AAC)
C1694-09(2017) Standard Specification for Reinforced Autoclaved Aerated Concrete (AAC) Elements
C822-21 Standard Terminology Relating to Concrete Pipe and Related Products
C444/C444M-21 Standard Specification for Perforated Concrete Pipe
C915-79(2018) Standard Specification for Precast Reinforced Concrete Crib Wall Members
C901-18 Standard Specification for Prefabricated Masonry Panels
C1692-18 Standard Practice for Construction and Testing of Autoclaved Aerated Concrete (AAC) Masonry
C969M-19 Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)
C1214-19 Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
C1618-19 Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) Air Pressure
C1214M-19 Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric)
C1618M-19 Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) Air Pressure (Metric)
C1089-19 Standard Specification for Spun Cast Prestressed Concrete Poles
C935-19 Standard Specification for General Requirements for Prestressed Concrete Poles Statically Cast
C858-19 Standard Specification for Underground Precast Concrete Utility Structures
C1717-19 Standard Test Methods for Conducting Strength Tests of Masonry Wall Panels
C1417-19 Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design
C1417M-19 Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric)
C857-19 Standard Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures
C655M-19a Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric)
C1825-19 Standard Guide for Developing Specifications for Masonry Units
C1732-19 Standard Practice for Installation of Concrete Floor Tiles
C1131-20 Standard Practice for Least Cost (Life Cycle) Analysis of Concrete Culvert, Storm Sewer, and Sanitary Sewer Systems
C497M-20a Standard Test Methods for Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile (Metric)
C1898-20 Standard Test Methods for Determining the Chemical Resistance of Concrete Products to Acid Attack
C1568-08(2020) Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Mechanical Uplift Resistance Method)
C497-20e1 Standard Test Methods for Concrete Pipe, Concrete Box Sections, Manhole Sections, or Tile
C887-20 Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar
C1006/C1006M-20a Standard Test Method for Splitting Tensile Strength of Masonry Units
C1896-20 Standard Specification for Joints for Concrete Arch Pipe Using Profile Rubber Gaskets
C1824-16(2021) Standard Test Method for Full Scale Bending Test of Spun Prestressed Concrete Bases for Tapered Steel Lighting Poles
C1821/C1821M-16(2021)e1 Standard Practice for Installation of Underground Circular Precast Concrete Manhole Structures
C1324-20a Standard Test Method for Examination and Analysis of Hardened Masonry Mortar
C891-20 Standard Practice for Installation of Underground Precast Concrete Utility Structures
C1804-20 Standard Specification for Spun Cast Prestressed Concrete Bases for Tapered Steel Lighting Poles
C315-07(2021) Standard Specification for Clay Flue Liners and Chimney Pots
C159-06(2021) Standard Specification for Vitrified Clay Filter Blocks
C1283-15(2021) Standard Practice for Installing Clay Flue Lining
C443-21 Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets
C443M-21 Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets (Metric)
C1691-21 Standard Specification for Unreinforced Autoclaved Aerated Concrete (AAC) Masonry Units
C744-21 Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units
C1781/C1781M-21 Standard Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems
C1894-22 Standard Guide for Microbially Induced Corrosion of Concrete Products
C1837-22 Standard Specification for Production of Dry Cast Concrete Used for Manufacturing Pipe, Box, and Precast Structures
C425-22 Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings
C1167-22 Standard Specification for Clay Roof Tiles
C1492-22 Standard Specification for Concrete Roof Tile
C1569-22 Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Wind Tunnel Method)
C1570-22 Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Air Permeability Method)
C1479/C1479M-22 Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations
C1776/C1776M-17(2022) Standard Specification for Wet-Cast Precast Modular Retaining Wall Units
C1601-22a Standard Test Method for Field Determination of Water Penetration of Masonry Wall Surfaces
C1715/C1715M-22 Standard Test Method for Evaluation of Water Leakage Performance of Masonry Wall Drainage Systems
C126-22 Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units
C212-22 Standard Specification for Structural Clay Facing Tile
C652-22 Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale)
C902-22 Standard Specification for Pedestrian and Light Traffic Paving Brick
C1818-22 Standard Specification for Synthetic Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
C1577-20e1 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
C479-04(2022) Standard Specification for Vitrified Clay Liner Plates
C700-18(2022) Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated
C301-18(2022) Standard Test Methods for Vitrified Clay Pipe
C76-22a Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
C478/C478M-22 Standard Specification for Circular Precast Reinforced Concrete Manhole Sections
C76M-22a Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)
C361-22 Standard Specification for Reinforced Concrete Low-Head Pressure Pipe
C361M-22 Standard Specification for Reinforced Concrete Low-Head Pressure Pipe (Metric)
C507M-22 Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric)
C985-22 Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe
C985M-22 Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe (Metric)
C507-22 Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe
C506-22a Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe
C506M-22a Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric)
C1433M-22 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric)
C1904-22 Standard Test Methods for Determination of the Effects of Biogenic Acidification on Concrete Antimicrobial Additives and/or Concrete Products
C1675-22 Standard Practice for Installation of Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers
C1103-22 Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
E3317-22 Standard Specification for Silica-Based Sediments for the Evaluation of Stormwater Treatment Devices
C1208/C1208M-18(2022) Standard Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels
C56-22 Standard Specification for Structural Clay Nonloadbearing Tile
C1197-22 Standard Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method
C1261-22 Standard Specification for Firebox Brick for Residential Fireplaces
C1272-22a Standard Specification for Heavy Vehicular Paving Brick
C1403-22a Standard Test Method for Rate of Water Absorption of Masonry Mortars
C1531-22 Standard Test Methods for In Situ Measurement of Masonry Mortar Joint Shear Strength Index
C1072-22 Standard Test Methods for Measurement of Masonry Flexural Bond Strength
C1532/C1532M-22 Standard Practice for Selection, Removal, and Shipment of Manufactured Masonry Units and Masonry Specimens from Existing Construction
E518/E518M-22 Standard Test Methods for Flexural Bond Strength of Masonry
E519/E519M-22 Standard Test Method for Diagonal Tension (Shear) in Masonry Assemblages
C1892/C1892M-22 Standard Test Methods for Strength of Anchors in Masonry
E3332-23 Standard Test Method for Determining Trash and/or Debris Capture Performance of Stormwater Control Measures
C828-23 Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
C1932-23 Standard Specification for Manufacture of Reinforced Precast Concrete End Sections for Pipe
C476-23 Standard Specification for Grout for Masonry
C1405-23 Standard Specification for Glazed Brick (Single Fired, Brick Units)
C530-23 Standard Specification for Structural Clay Nonloadbearing Screen Tile
C947-03(2023) Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
C948-81(2023) Standard Test Method for Dry and Wet Bulk Density, Water Absorption, and Apparent Porosity of Thin Sections of Glass-Fiber Reinforced Concrete
C1228-96(2023) Standard Practice for Preparing Coupons for Flexural and Washout Tests on Glass Fiber Reinforced Concrete
C1229-94(2023) Standard Test Method for Determination of Glass Fiber Content in Glass Fiber Reinforced Concrete (GFRC) (Wash-Out Test)
C1230-96(2023) Standard Test Method for Performing Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads
C1560-03(2023) Standard Test Method for Hot Water Accelerated Aging of Glass-Fiber Reinforced Cement-Based Composites
C1666/C1666M-08(2023) Standard Specification for Alkali Resistant (AR) Glass Fiber for GFRC and Fiber-Reinforced Concrete and Cement
C1704/C1704M-09a(2023) Standard Test Method for Sampling and Testing Structural Cementitious Panels
C1705/C1705M-09(2023) Standard Specification for Structural Cementitious Panels
C946-23 Standard Practice for Construction of Dry-Stacked, Surface-Bonded Walls
C32-23 Standard Specification for Sewer and Manhole Brick (Made From Clay or Shale)
C34-23 Standard Specification for Structural Clay Loadbearing Wall Tile
C410-23 Standard Specification for Industrial Floor Brick
C426-23 Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units
C1093-23 Standard Practice for Accreditation of Testing Agencies for Masonry
C980-23 Standard Specification for Industrial Chimney Lining Brick
C62-23 Standard Specification for Building Brick (Solid Masonry Units Made from Clay or Shale)
C73-23 Standard Specification for Calcium Silicate Brick (Sand-Lime Brick)
C279-23 Standard Specification for Chemical-Resistant Masonry Units
C780-23 Standard Test Methods for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
C4-04(2023) Standard Specification for Clay Drain Tile and Perforated Clay Drain Tile
C1325-22e1 Standard Specification for Fiber-Mat Reinforced Cementitious Backer Units
C1186-22e1 Standard Specification for Flat Fiber-Cement Sheets
C1450/C1450M-04(2019)e1 Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe
C1447/C1447M-04(2019)e1 Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe
C1448/C1448M-05(2019)e1 Standard Specification for Non-Asbestos Fiber-Cement Conduit
C1449/C1449M-05a(2019)e1 Standard Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe
C1885-23 Standard Specification for Circular Precast Concrete Culvert, Storm Drain, and Sewer Pipe for Pipe Jacking
C1920-23 Standard Practice for Cleaning of Vitrified Clay Sanitary Sewer Pipelines
C1619-23 Standard Specification for Elastomeric Seals for Joining Concrete Structures
C913-23 Standard Specification for Precast Concrete Water and Wastewater Structures
C1400-23 Standard Guide for Reduction of Efflorescence Potential in New Masonry Walls
C1185-23 Standard Test Methods for Sampling and Testing Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards
C1225-23 Standard Specification for Fiber-Cement Roofing Shingles, Shakes, and Slates
C1288-23 Standard Specification for Fiber-Cement Interior Substrate Sheets
C1459-23 Standard Specification for Performance of Non-Asbestos Fiber-Reinforced Cement Shake, Shingle, and Slate Roofing Systems
C1530/C1530M-23 Standard Specification for Fiber-Cement Roofing Shakes, Shingles, and Slates with Designed Varying Profiles and Thicknesses
C55-23 Standard Specification for Concrete Building Brick
C129-23 Standard Specification for Nonloadbearing Concrete Masonry Units
C139-23 Standard Specification for Concrete Masonry Units for Construction of Catch Basins and Manholes
C1623-23 Standard Specification for Manufactured Concrete Masonry Lintels
C1634-23a Standard Specification for Concrete Facing Brick and Other Concrete Masonry Facing Units
C1319-23a Standard Specification for Concrete Grid Paving Units
C1384-23 Standard Specification for Admixtures for Masonry Mortars
C1552/C1552M-23a Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing
C1628-19(2024) Standard Specification for Joints for Concrete Gravity Flow Sewer Pipe, Using Rubber Gaskets
C1677-11a(2024) Standard Specification for Joints for Concrete Box, Using Rubber Gaskets
C1941-24 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers for Jacking
C1903-24 Standard Specification for Precast Concrete Duct Bank
C118/C118M-24 Standard Specification for Concrete Pipe for Irrigation or Drainage
E3373-24 Standard Test Method for Scour of Hydrodynamic Separators and Settling Devices
C404-24 Standard Specification for Aggregates for Masonry Grout
C1877-24 Standard Specification for Adhered Concrete Masonry Units
C1745/C1745M-24 Standard Test Method for Measurement of Hydraulic Characteristics of Hydrodynamic Stormwater Separators and Underground Settling Devices
C1924-24 Standard Practice for Design of Buried Precast Concrete Low-Head Pressure Pipe
C1893-24 Standard Practice for Laboratory Performance Verification of Hydrodynamic Separators for the Treatment of Stormwater Runoff
C896-24 Standard Terminology Relating to Clay Products
C1765-24 Standard Specification for Steel Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
C1846/C1846M-19(2024) Standard Specification for Performance Based Manufacture of Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
C990/C990M-24 Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants
C1154-24a Standard Terminology for Fiber-Reinforced Cement Products
C1262/C1262M-24 Standard Test Method for Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units
C1613-24a Standard Specification for Precast Concrete Gravity Grease Interceptor Tanks
C1719-24 Standard Test Method for Installed Precast Concrete Tanks and Accessories by the Negative Air Pressure (Vacuum) Test Prior to Backfill
C1227-24 Standard Specification for Precast Concrete Septic Tanks
C936/C936M-24 Standard Specification for Solid Concrete Interlocking Paving Units
C1782/C1782M-24 Standard Specification for Segmental Concrete Paving Slabs
C1884-24 Standard Specification for Manufactured Concrete Ballast Units
C1180-24 Standard Terminology of Mortar and Grout for Unit Masonry
C1716/C1716M-24 Standard Specification for Compression Testing Machine Requirements for Concrete Masonry Units, Related Units, and Prisms
C270-24 Standard Specification for Mortar for Unit Masonry
C1746/C1746M-24 Standard Test Method for Measurement of Suspended Sediment Removal Efficiency of Hydrodynamic Stormwater Separators and Underground Settling Devices
C1037-16(2024) Standard Practice for Inspection of Underground Precast Concrete Utility Structures
C825-24 Standard Specification for Precast Concrete Barriers
C1930-24 Standard Test Method for Determination of Slurry Flow Rate of Fresh Glass Fiber Reinforced Concrete
C1364-23e1 Standard Specification for Architectural Cast Stone
C12-24 Standard Practice for Installing Vitrified Clay Pipe Lines
C969-24 Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines and Manholes
C1786-19(2024)e1 Standard Specification for Segmental Precast Reinforced Concrete Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
C1433-24 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers
C1840/C1840M-24a Standard Practice for Inspection and Acceptance of Installed Reinforced Concrete Culvert, Storm Drain, and Storm Sewer Pipe
E3318-24a Standard Terminology for Standards Relating to Stormwater Control Measures
C1644/C1644M-24 Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes
C1645-22ae1 Standard Test Method for Freeze-thaw and De-icing Salt Durability of Solid Concrete Interlocking Paving Units
C395-24 Standard Specification for Chemical-Resistant Resin Mortars
C216-24 Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
C1660-24 Standard Specification for Thin-bed Mortar for Autoclaved Aerated Concrete (AAC) Masonry
C1714/C1714M-24 Standard Specification for Preblended Dry Mortar Mix for Unit Masonry
C67/C67M-24 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
C144-24 Standard Specification for Aggregate for Masonry Mortar
C1232-24a Standard Terminology for Masonry
C1802/C1802M-24 Standard Specification for Design, Testing, Manufacture, Selection, and Installation of Horizontal Fabricated Metal Access Hatches for Utility, Water, and Wastewater Structures
C1944/C1944M-24a Standard Specification for Pedestal-Set Concrete Paving Slabs
C14-20(2025) Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe
C14M-20(2025) Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe (Metric)
C90-24a Standard Specification for Dry-Cast Loadbearing Concrete Masonry Units
C140/C140M-24a Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
C1314-24 Standard Test Method for Compressive Strength of Masonry Prisms
C412-19(2025) Standard Specification for Concrete Drain Tile
C1372-24 Standard Specification for Dry-Cast Segmental Retaining Wall Units
C412M-19(2025) Standard Specification for Concrete Drain Tile (Metric)
C505-19(2025) Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints
C505M-19(2025) Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints (Metric)
C654-19(2025) Standard Specification for Porous Concrete Pipe
C654M-19(2025) Standard Specification for Porous Concrete Pipe (Metric)
C1019-24a Standard Test Method for Sampling and Testing Grout for Masonry
C1935-24 Standard Practice for Installation Methods for Adhered Veneer Systems Using Thin Brick Units Made from Clay or Shale
C1780-25 Standard Practice for Installation Methods for Cement-based Adhered Masonry Veneer
C1088-24 Standard Specification for Thin Veneer Brick Units Made From Clay or Shale
C1194-25 Standard Test Method for Compressive Strength of Architectural Cast Stone
C1670/C1670M-24a Standard Specification for Adhered Manufactured Stone Masonry Veneer Units
C1713-24a Standard Specification for Mortars for the Repair of Historic Masonry