ASTM Volume 04.03, June 2022

Table of Contents

D5078/D5078M-11(2021) Standard Specification for Crack Filler, Hot-Applied, for Asphalt Concrete and Portland Cement Concrete Pavements

D5893/D5893M-16(2021) Standard Specification for Cold-Applied, Single-Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements

D5249-10(2021) Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland Cement Concrete and Asphalt Joints

D7116-16(2021) Standard Specification for Joint Sealants, Hot Applied, Jet Fuel Resistant Types, for Portland Cement Concrete Pavements

D6626-15(2021) Standard Specification for Performance-Graded Trinidad Lake Modified Asphalt Binder

D7370/D7370M-14(2021) Standard Test Method for Determination of Relative Density and Absorption of Fine, Coarse, and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion

D8303-20 Standard Test Method for Determining Thermal Cracking Properties of Asphalt Mixtures Through Measurement of Thermally Induced Stress and Strain

D7313-20 Standard Test Method for Determining Fracture Energy of Asphalt Mixtures Using the Disk-Shaped Compact Tension Geometry

D6608-20 Standard Practice for the Identification of Trinidad Lake Asphalt in Asphalt Mixes

D4552/D4552M-20 Standard Classification for Hot-Mix Recycling Agents

D8378/D8378M-21 Standard Test Method for Potential Expansion of Steel Slag from Hydration Reactions by Autoclave

D8021-20 Standard Guide for Blast Furnace and Steel Furnace Slag as Produced During the Manufacture of Iron and Steel

D3625/D3625M-20 Standard Practice for Effect of Water on Asphalt-Coated Aggregate Using Boiling Water

D6857/D6857M-18 Standard Test Method for Maximum Specific Gravity and Density of Asphalt Mixtures Using Automatic Vacuum Sealing Method

D545-19 Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)

D75/D75M-19 Standard Practice for Sampling Aggregates

D1369-19 Standard Practice for Quantities of Materials for Asphalt-Aggregate Surface Treatments

D6155-19 Standard Specification for Nontraditional Coarse Aggregates for Asphalt Paving Mixtures

D6930-19 Standard Test Method for Settlement and Storage Stability of Emulsified Asphalts

D7553-15(2021) Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide

D6752/D6752M-18 Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method

D70/D70M-21 Standard Test Method for Specific Gravity and Density of Semi-Solid Asphalt Binder (Pycnometer Method)

D7497-21 Standard Practice for Recovering Residue from Emulsified Asphalt Using Low-Temperature Evaporative Technique

D4125/D4125M-21 Standard Test Methods for Asphalt Content of Asphalt Mixtures by the Nuclear Method

D6932/D6932M-21 Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Asphalt Mixtures

D4215-21 Standard Specification for Cold-Mixed, Cold-Laid Asphalt Paving Mixtures

D6929-21 Standard Practice for Evaluating the Effect of Freezing on Emulsified Asphalts

E2835-21 Standard Test Method for Measuring Deflections Using a Portable Impulse Plate Load Test Device

D6995-21 Standard Test Method for Determining Field VMA Based on the Maximum Specific Gravity of an Asphalt Mixture (Gmm)

D1856-21 Standard Test Method for Recovery of Asphalt from Solution by Abson Method

D7064/D7064M-21 Standard Practice for Open-Graded Friction Course (OGFC) Asphalt Mixture Design

D6690-21 Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements

D8159-19 Standard Test Method for Automated Extraction of Asphalt Binder from Asphalt Mixtures

E1845-15 Standard Practice for Calculating Pavement Macrotexture Mean Profile Depth

D1560-15 Standard Test Methods for Resistance to Deformation and Cohesion of Asphalt Mixtures by Means of Hveem Apparatus

D8237-21 Standard Test Method for Determining Fatigue Failure of Asphalt-Aggregate Mixtures with the Four-Point Beam Fatigue Device

D517-98(2015) Standard Specification for Asphalt Plank

D5360-15 Standard Practice for Design and Construction of Bituminous Surface Treatments

D7564/D7564M-16 Standard Practice for Construction of Asphalt-Rubber Cape Seal

D7113/D7113M-10(2016) Standard Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods

D2726/D2726M-21 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Asphalt Mixtures

D3666-16 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials

D6937-16 Standard Test Method for Determining Density of Emulsified Asphalt

D2628-91(2016) Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements

D6648-08(2016) Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)

D8079-16 Standard Practice for Preparation of Compacted Slab Asphalt Mix Samples Using a Segmented Rolling Compactor

E2667-09(2017) Standard Practice for Acquiring Intersection Turning Movement Traffic Data

D139-16 Standard Test Method for Float Test for Bituminous Materials

D2489/D2489M-16 Standard Test Method for Estimating Degree of Particle Coating of Asphalt Mixtures

D2493/D2493M-16 Standard Practice for Viscosity-Temperature Chart for Asphalt Binders

E1318-09(2017) Standard Specification for Highway Weigh-In-Motion (WIM) Systems with User Requirements and Test Methods

E2532-09(2017) Standard Test Methods for Evaluating Performance of Highway Traffic Monitoring Devices

E2300-09(2017) Standard Specification for Highway Traffic Monitoring Devices

E2665-08(2017) Standard Specification for Archiving ITS-Generated Traffic Monitoring Data

D3042-17 Standard Test Method for Insoluble Residue in Carbonate Aggregates

D6928-17 Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus

D1074-17 Standard Test Method for Compressive Strength of Asphalt Mixtures

D546-17 Standard Test Method for Sieve Analysis of Mineral Filler for Asphalt Paving Mixtures

D4469-17 Standard Practice for Calculating Percent Asphalt Absorption by the Aggregate in Asphalt Mixtures

D3319-11(2017) Standard Practice for the Accelerated Polishing of Aggregates Using the British Wheel

E1082-90(2017) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness

D5801-17 Standard Test Method for Toughness and Tenacity of Asphalt Materials

E1364-95(2017) Standard Test Method for Measuring Road Roughness by Static Level Method

E1215-93(2017) Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness

D6924-03(2017) Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges

D5973-97(2017) Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing

D6931-17 Standard Test Method for Indirect Tensile (IDT) Strength of Asphalt Mixtures

D6936-17 Standard Test Method for Determining Demulsibility of Emulsified Asphalt

D5821-13(2017) Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate

D6390-11(2017) Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures

D3665-12(2017) Standard Practice for Random Sampling of Construction Materials

D7402-09(2017) Standard Practice for Identifying Cationic Emulsified Asphalts

E3303-21 Standard Practice for Generating Pavement Surface Cracking Indices from Digital Images

D1196/D1196M-21 Standard Test Method for Nonrepetitive Static Plate Tests of Soils and Flexible Pavement Components for Use in Evaluation and Design of Airport and Highway Pavements

D1195/D1195M-21 Standard Test Method for Repetitive Static Plate Tests of Soils and Flexible Pavement Components for Use in Evaluation and Design of Airport and Highway Pavements

D8259/D8259M-21 Standard Test Method for Rotary Wheel Testing (RWT) of Compacted Asphalt Mixtures

E1274-18 Standard Test Method for Measuring Pavement Roughness Using a Profilograph

D4124-09(2018) Standard Test Method for Separation of Asphalt into Four Fractions

D8139-17 Standard Specification for Semi-Rigid, Closed-Cell Polypropylene Foam, Preformed Expansion Joint Fillers for Concrete Paving and Structural Construction

D3142/D3142M-17 Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method

D5/D5M-20 Standard Test Method for Penetration of Bituminous Materials

D4280-18 Standard Specification for Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers

D7741/D7741M-18 Standard Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Handheld Viscometer

E1957-04(2018) Standard Practice for Installing and Using Pneumatic Tubes With Roadway Traffic Counters and Classifiers

E2213-03(2018) Standard Specification for Telecommunications and Information Exchange Between Roadside and Vehicle Systems — 5-GHz Band Dedicated Short-Range Communications (DSRC), Medium Access Control (MAC), and Physical Layer (PHY) Specifications

E2259-03a(2018) Standard Guide for Archiving and Retrieving Intelligent Transportation Systems-Generated Data

E2415-05(2018) Standard Practice for Installing Piezoelectric Highway Traffic Sensors

E2561-07a(2018) Standard Practice for the Installation of Inductive Loop Detectors

E2467-05(2018) Standard Practice for Developing Axle Count Adjustment Factors

E2468-05(2018) Standard Practice for Metadata to Support Archived Data Management Systems

E2759-10(2018) Standard Practice for Highway Traffic Monitoring Truth-in-Data

D3744/D3744M-18 Standard Test Method for Aggregate Durability Index

D7063/D7063M-18 Standard Test Method for Effective Porosity and Effective Air Voids of Compacted Asphalt Mixture Samples

D1751-18 Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types)

D5167-13(2018) Standard Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation

D7496-18 Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer

D6307-19 Standard Test Method for Asphalt Content of Asphalt Mixture by Ignition Method

D7495-12(2019) Standard Specification for Minimum Requirements for Accreditation Bodies That Accredit Agencies Testing and Inspecting Road and Paving Materials

D4792/D4792M-13(2019) Standard Test Method for Potential Expansion of Aggregates from Hydration Reactions

E3188-19 Standard Terminology for Aircraft Braking Performance

D4014-03(2018) Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges

D8225-19 Standard Test Method for Determination of Cracking Tolerance Index of Asphalt Mixture Using the Indirect Tensile Cracking Test at Intermediate Temperature

D140/D140M-16 Standard Practice for Sampling Asphalt Materials

D113-17 Standard Test Method for Ductility of Asphalt Materials

D3381/D3381M-18 Standard Specification for Viscosity-Graded Asphalt Binder for Use in Pavement Construction

D242/D242M-19 Standard Specification for Mineral Filler for Asphalt Mixtures

D3143/D3143M-19 Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus

D1985-13(2019) Standard Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks

D8254-19 Standard Test Method for Flash and Fire Points of Asphalt by Cleveland Open Cup Tester

D8189-19 Standard Test Method for Tackiness of Asphalt Binders and Emulsified Asphalt Residue Using the Dynamic Shear Rheometer (DSR)

D4956-19 Standard Specification for Retroreflective Sheeting for Traffic Control

D3279-19 Standard Test Method for n-Heptane Insolubles

D7175-15 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer

D7403-19 Standard Test Method for Determination of Residue of Emulsified Asphalt by Low Temperature Vacuum Distillation

D8078-18e1 Standard Test Method for Ash Content of Asphalt and Emulsified Asphalt Residues

D3542-08(2019) Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges

D7404-19 Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Balance Analyzer

E1166-00(2019) Standard Guide for Network Level Pavement Management

E1489-08(2019) Standard Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device

E3145-19 Standard Test Method for User-Level Calibration of Dynamic Friction Tester (DF Tester)

E2380/E2380M-15(2019) Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter

E2883-13(2019) Standard Guide for Evaluation and Calibration, Continuous Friction Measurement Equipment (CFME)

E2666-09(2019) Standard Practice for Correlations of Mu Values of Continuous Friction Measurement Equipment to Determine Maintenance Levels for Use at Airports

E1777-09(2019) Standard Guide for Prioritization of Data Needs for Pavement Management

E2955-13(2019) Standard Practice for Simulating Profilograph Response to Longitudinal Profiles of Traveled Surfaces

E1778-98a(2019) Standard Terminology Relating to Pavement Distress

E445/E445M-15(2019) Standard Test Method for Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped with Full-Scale Tires

E965-15(2019) Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique

E2157-15(2019) Standard Test Method for Measuring Pavement Macrotexture Properties Using the Circular Track Meter

E1889-97(2019) Standard Guide for Pavement Management Implementation

E1337-19 Standard Test Method for Determining Longitudinal Peak Braking Coefficient (PBC) of Paved Surfaces Using Standard Reference Test Tire

E2341/E2341M-05(2019) Standard Test Method for Determining the Stopping Distance Number by Initial Speed and Stopping Distance at Traffic Incident Sites

E2840-11(2019) Standard Practice for Pavement Condition Index Surveys for Interlocking Concrete Roads and Parking Lots

D2027/D2027M-19 Standard Specification for Cutback Asphalt (Medium-Curing Type)

D6998-19 Standard Practice for Evaluating Aggregate Coating using Emulsified Asphalts

D6926-20 Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus

D6703-19 Standard Test Method for Automated Heithaus Titrimetry

D7000-19a Standard Test Method for Sweep Test of Emulsified Asphalt Surface Treatment Samples

D8260-20 Standard Specification for Hot-Applied Asphalt Aggregate-Filled Mastic

D8292-20 Standard Test Method for Permanent Deformation Behavior and Rutting Resistance of Compacted Asphalt Mix in the Modified Loaded Wheel Tracker Test Utilizing Controlled Confining Pressure

D7981-20 Standard Practice for Compaction of Prismatic Asphalt Specimens by Means of the Shear Box Compactor

D2835-89(2017) Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements

D7405-20 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer

D6628-16 Standard Specification for Color of Pavement Marking Materials

D692/D692M-20 Standard Specification for Coarse Aggregate for Asphalt Paving Mixtures

D7173-20 Standard Practice for Determining the Separation Tendency of Polymer from Polymer-Modified Asphalt

D946/D946M-20 Standard Specification for Penetration-Graded Asphalt Binder for Use in Pavement Construction

D7870/D7870M-20 Standard Practice for Moisture Conditioning Compacted Asphalt Mixture Specimens by Using Hydrostatic Pore Pressure

D7115-20 Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading

D5329-20 Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphalt Pavements and Portland Cement Concrete Pavements

D2940/D2940M-20 Standard Specification for Graded Aggregate Material for Bases or Subbases for Highways or Airports

E2101-15(2020) Standard Test Method for Measuring the Frictional Properties of Winter-Contaminated Pavement Surfaces Using an Averaging-Type Spot Measuring Decelerometer

E274/E274M-15(2020) Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire

E670-09(2020) Standard Test Method for Testing Side Force Friction on Paved Surfaces Using the Mu-Meter

E1859/E1859M-11(2020) Standard Test Method for Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique

E556/E556M-11(2020) Standard Test Method for Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform (User Level)

E3209/E3209M-20 Standard Test Method for Pavement Thickness by Magnetic Pulse Induction

D4957-18 Standard Test Method for Apparent Viscosity of Asphalt Emulsion Residues and Non-Newtonian Asphalts by Vacuum Capillary Viscometer

D6114/D6114M-19 Standard Specification for Asphalt-Rubber Binder

D4791-19 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate

E1911-19 Standard Test Method for Measuring Surface Frictional Properties Using the Dynamic Friction Tester

E501-08(2020) Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests

E524-08(2020) Standard Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests

E1844-08(2020) Standard Specification for a Size 10 × 4–5 Smooth-Tread Friction Test Tire

E1551-16(2020) Standard Specification for a Size 4.00-8 Smooth Tread Friction Test Tire

D4602-93(2020) Standard Guide for Nondestructive Testing of Pavements Using Cyclic-Loading Dynamic Deflection Equipment

D4748-10(2020) Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar

E2583-07(2020) Standard Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD)

D4695-03(2020) Standard Guide for General Pavement Deflection Measurements

D5858-96(2020) Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory

D4694-09(2020) Standard Test Method for Deflections with a Falling-Weight-Type Impulse Load Device

D7228-06a(2020) Standard Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures

D5505-14(2020) Standard Practice for Classifying Emulsified Recycling Agents

D977-20 Standard Specification for Emulsified Asphalt

E3208-20 Standard Specification for Minimum Equipment Requirements for Mobile Surface Contaminant Classification and Measurement Equipment

E2133-03(2020) Standard Test Method for Using a Rolling Inclinometer to Measure Longitudinal and Transverse Profiles of a Traveled Surface

D7369-20 Standard Test Method for Determining the Resilient Modulus of Asphalt Mixtures by Indirect Tension Test

D2397/D2397M-20 Standard Specification for Cationic Emulsified Asphalt

D632-12(2020)e1 Standard Specification for Sodium Chloride

D3628-15(2021) Standard Practice for Selection and Use of Emulsified Asphalts

D1754/D1754M-20 Standard Test Method for Effects of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)

D6297-20 Standard Specification for Asphaltic Plug Joints for Bridges

E2340/E2340M-11(2021) Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique

E1926-08(2021) Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements

D244-09(2017) Standard Test Methods and Practices for Emulsified Asphalts

D2041/D2041M-19 Standard Test Method for Theoretical Maximum Specific Gravity and Density of Asphalt Mixtures

D2172/D2172M-17e1 Standard Test Methods for Quantitative Extraction of Asphalt Binder from Asphalt Mixtures

D6925-15 Standard Test Method for Preparation and Determination of the Relative Density of Asphalt Mix Specimens by Means of the Superpave Gyratory Compactor

D6997-12(2020) Standard Test Method for Distillation of Emulsified Asphalt

D6999-19 Standard Practice for Miscibility of Emulsified Asphalts

D2399-21 Standard Practice for Selection of Cutback Asphalts

D98-15(2021) Standard Specification for Calcium Chloride

D6084/D6084M-21 Standard Test Method for Elastic Recovery of Asphalt Materials by Ductilometer

D6607-21 Standard Practice for Inclusion of Precision Statement Variation in Specification Limits

D5404/D5404M-21 Standard Practice for Recovery of Asphalt Binder from Solution Using the Rotary Evaporator

D8418-21 Standard Guide for Material and Construction Standards Related to Sustainability Within Committee D04

D2026/D2026M-15(2021)e1 Standard Specification for Cutback Asphalt (Slow-Curing Type)

D3141/D3141M-21 Standard Specification for Asphalt for Undersealing Portland-Cement Concrete Pavements

D8379/D8379M-21 Standard Practice for Evaluating Nighttime Retroreflective Sheeting Effectiveness Using Positive-Contrast Textual Sign Scenario Performance Analysis

D3910-21 Standard Practices for Design, Testing, and Construction of Slurry Seal

D2028/D2028M-15(2021)e1 Standard Specification for Cutback Asphalt (Rapid-Curing Type)

D4887/D4887M-11(2021)e1 Standard Practice for Preparation of Viscosity Blends for Hot Recycled Asphalt Materials

D5581-07A(2021)e1 Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 in. Diameter Specimen)

D6154-15(2021)e1 Standard Specification for Chemically Modified Asphalt Cement for Use in Pavement Construction

D4383-21 Standard Specification for Plowable, Raised Retroreflective Pavement Markers

D4311/D4311M-21 Standard Practice for Determining Asphalt Volume Correction to a Base Temperature

D2042-22 Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene or Toluene

E2793-22 Standard Guide for Evaluation, Calibration, and Correlation of E274 Friction Measurement Systems and Equipment

D4788-03(2022) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography

D4505-12(2022) Standard Specification for Preformed Retroreflective Pavement Marking Tape for Extended Service Life

D5710/D5710M-22 Standard Specification for Trinidad Lake Modified Asphalt

D6933-22 Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)

D6704-22 Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material

D4592-12(2022) Standard Specification for Preformed Retroreflective Pavement Marking Tape for Limited Service Life

D7585/D7585M-10(2022) Standard Practice for Evaluating Retroreflective Pavement Markings Using Portable Hand-Operated Instruments

D2872-22 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt Binder (Rolling Thin-Film Oven Test)

D7906-22 Standard Practice for Recovery of Asphalt Binder from Solution Using Toluene and the Rotary Evaporator

D994/D994M-11(2022) Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type)

D4070-15(2022) Standard Specification for Adhesive Lubricant for Installation of Preformed Elastomeric Bridge Compression Seals in Concrete Structures

D7174-05(2022) Standard Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction

E303-22 Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester

E3013/E3013M-17(2022) Standard Test Method for Evaluating Concrete Pavement Dowel Bar Alignment Using Magnetic Pulse Induction

D8-22a Standard Terminology Relating to Materials for Roads and Pavements

D6521-22 Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)

D7643-22 Standard Practice for Determining the Continuous Grading Temperatures and Continuous Grades for PG Graded Asphalt Binders

D1188/D1188M-22 Standard Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Coated Samples

D8467-22 Standard Test Method for Determination of Emulsified Asphalt Residue By Quick Boil

D1073-16(2022) Standard Specification for Fine Aggregate for Asphalt Paving Mixtures

D1139/D1139M-22 Standard Specification for Aggregate for Single or Multiple Asphalt Surface Treatments

D5106-22 Standard Specification for Steel Slag Aggregates for Asphalt Paving Mixtures

D6934-22 Standard Test Method for Residue by Evaporation of Emulsified Asphalt

D243/D243M-22 Standard Test Method for Residue of Specified Penetration

D7944-22 Standard Practice for Recovery of Emulsified Asphalt Residue Using a Vacuum Oven

D2419-22 Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate

D8360-22 Standard Test Method for Determination of Rutting Tolerance Index of Asphalt Mixture Using the Ideal Rutting Test

D6927-22 Standard Test Method for Marshall Stability and Flow of Asphalt Mixtures

D6935-22 Standard Test Method for Determining Cement Mixing of Emulsified Asphalt

D3203-22 Standard Test Method for Percent Air Voids in Compacted Asphalt Mixtures

D3289-17(2022) Standard Test Method for Density of Semi-Solid and Solid Asphalt Materials (Nickel Crucible Method)

D448-12(2022) Standard Classification for Sizes of Aggregate for Road and Bridge Construction

D4460-22a Standard Practice for Calculating Precision Limits Where Values Are Calculated from Other Test Methods

D979/D979M-22 Standard Practice for Sampling Asphalt Mixtures

D1461-17(2022) Standard Test Method for Moisture or Volatile Distillates in Asphalt Mixtures

D6087-22 Standard Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar

E3304-22 Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Walking Speed Continuous Friction-Measuring Equipment (CFME) Fixed-Slip Technique

E950/E950M-22 Standard Test Method for Measuring the Longitudinal Profile of Traveled Surfaces

D4867/D4867M-22 Standard Test Method for Effect of Moisture on Asphalt Mixtures

D2171/D2171M-22 Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer

D2170/D2170M-22 Standard Test Method for Kinematic Viscosity of Asphalts

E3331-22a Standard Test Method for Measuring Target Modulus Using Light Weight Deflectometer (LWD) on Compacted Proctor Mold Samples

D5361/D5361M-16(2022) Standard Practice for Sampling Compacted Asphalt Mixtures for Laboratory Testing

D6627/D6627M-22 Standard Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures

D8458-22 Standard Test Method for Evaluation of Fatigue Performance of Asphalt Mixtures Using the Three-Point Bending Cylinder (3PBC) Test

D7227/D7227M-22 Standard Practice for Rapid Drying of Compacted Asphalt Mixture Specimens Using Vacuum Drying Apparatus

D6433-23 Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys

E1890-11(2023) Standard Guide for Validating New Area Reference Skid Measurement Systems and Equipment

D7552-22 Standard Test Method for Determining the Complex Shear Modulus (G*) of Asphalt Mixtures Using Dynamic Shear Rheometer

D2950/D2950M-22 Standard Test Method for Density of Asphalt Mixtures in Place by Nuclear Methods

E3266-23 Standard Guide for Friction-Limited Aircraft Braking Measurements and Reporting

D8055-23 Standard Guide for Selecting an Appropriate Electronic Thermometer for Replacing Mercury Thermometers in D04 Road and Paving Standards

E1170-97(2023) Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces

E1448/E1448M-09(2023) Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness

E2034-99(2023) Standard Practices for Simulating Truck Response to Longitudinal Profiles of Vehicular Traveled Surfaces

E1703/E1703M-10(2023) Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge

D7226-13(2023) Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer

E1927-98(2023) Standard Guide for Conducting Subjective Pavement Ride Quality Ratings

D3549/D3549M-18(2023) Standard Test Method for Thickness or Height of Compacted Asphalt Mixture Specimens

D6372-23 Standard Practice for Design, Testing, and Construction of Microsurfacing

D7428-15(2023) Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus

D7942-15(2023) Standard Specification for Thermoplastic Pavement Markings in Non Snow Plow Areas

D8140-18(2023) Standard Guide for the Use of Foundry Sand in Asphalt Mixtures

E1960-07(2023) Standard Practice for Calculating International Friction Index of a Pavement Surface

D2995-23 Standard Practice for Estimating Application Rate and Residual Application Rate of Bituminous Distributors

D8138-23 Standard Specification for Preformed Silicone Joint Sealing System for Bridges

E3028-23 Standard Practice for Computing Wheelchair Pathway Roughness Index as Related to Comfort, Passability, and Whole-Body Vibrations from Longitudinal Profile Measurements

D5444-23 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate

D8507-23 Standard Specification for High Load Multi-Rotational Disc Bearings for Bridges and Structures

D8395-23 Standard Specification for Aramid Fiber for Asphalt Mixtures

E2560-23 Standard Specification for Data Format for Pavement Profile

D4071-23 Standard Practice for Use of Portland Cement Concrete Bridge Deck Water Barrier Membrane Systems

D4580-23 Standard Practice for Measuring Delamination in Concrete Bridge Decks by Sounding

D5977-23 Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures

D6153-23 Standard Specification for Materials for Bridge Deck Waterproofing Membrane Systems

D8044-23 Standard Test Method for Evaluation of Asphalt Mixture Cracking Resistance Using the Semi-Circular Bend Test (SCB) at Intermediate Temperatures

E867-23 Standard Terminology Relating to Vehicle-Pavement Systems

D8125-18(2023) Standard Specification for Re-Refined Engine Oil Bottoms (REOB)/Vacuum Tower Asphalt Extender (VTAE)

D7196-23 Standard Test Method for Raveling Test of Cold-Mixed Emulsified Asphalt Samples

D8188-23 Standard Test Method for Determination of Density and Relative Density of Asphalt, Semi-Solid Bituminous Materials, and Soft-Tar Pitch by Use of a Digital Density Meter (U-Tube)

C1252-23 Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)

D8514/D8514M-23 Standard Specification for Flexible, Retroreflective Sheeting for Use in High Visibility Vehicle Markings

D1752-18(2023) Standard Specification for Preformed Sponge Rubber, Cork, and Recycled PVC Expansion Joint Fillers for Concrete Paving and Structural Construction

D6373-23 Standard Specification for Performance-Graded Asphalt Binder

D8239-23 Standard Specification for Performance-Graded Asphalt Binder Using the Multiple Stress Creep and Recovery (MSCR) Test

D3633/D3633M-23 Standard Test Method for Electrical Resistivity of Membrane-Pavement Systems

D5340-23 Standard Test Method for Airport Pavement Condition Index Surveys

D6951/D6951M-18(2023) Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications