ASTM Volume 03.04, October 2022

Table of Contents

E2699-20 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Digital Radiographic (DR) Test Methods

E2905/E2905M-20 Standard Practice for Examination of Mill and Kiln Girth Gear Teeth—Electromagnetic Methods

E3168-20a Standard Practice for Determining Low-Contrast Visual Acuity of Radiographic Interpreters

E2930-13(2021) Standard Practice for Pressure Decay Leak Test Method

E2479-16(2021) Standard Practice for Measuring the Ultrasonic Velocity in Polyethylene Tank Walls Using Lateral Longitudinal (LCR) Waves

E3030-19 Standard Digital Reference Images for Heavy-Walled (2 to 412 in. (50.8 to 114 mm)) Steel Castings

E2534-20 Standard Practice for Targeted Defect Detection Using Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts

E2982-21 Standard Guide for Nondestructive Examination of Thin-Walled Metallic Liners in Filament-Wound Pressure Vessels Used in Aerospace Applications

E3267-21 Standard Guide for Building Information Models and Archiving for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)

E3081-21 Standard Practice for Outlier Screening Using Process Compensated Resonance Testing via Swept Sine Input for Metallic and Non-Metallic Parts

E2767-21 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for X-ray Computed Tomography (CT) Test Methods

E3023-21 Standard Practice for Probability of Detection Analysis for â Versus a Data

E2533-21 Standard Guide for Nondestructive Examination of Polymer Matrix Composites Used in Aerospace Applications

E2981-21 Standard Guide for Nondestructive Examination of Composite Overwraps in Filament Wound Pressure Vessels Used in Aerospace Applications

E2582-21 Standard Practice for Infrared Flash Thermography of Composite Panels and Repair Patches Used in Aerospace Applications

E2775-16 Standard Practice for Guided Wave Testing of Above Ground Steel Pipework Using Piezoelectric Effect Transduction

E2928/E2928M-17 Standard Practice for Examination of Drillstring Threads Using the Alternating Current Field Measurement Technique

E2863-17 Standard Practice for Acoustic Emission Examination of Welded Steel Sphere Pressure Vessels Using Thermal Pressurization

E2869-17 Standard Digital Reference Images for Magnesium Castings

E2580-17 Standard Practice for Ultrasonic Testing of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications

E2903-18 Standard Test Method for Measurement of the Effective Focal Spot Size of Mini and Micro Focus X-ray Tubes

E3147-18 Standard Practice for Evaluating DICONDE Interoperability of Nondestructive Testing and Inspection Systems

E2862-18 Standard Practice for Probability of Detection Analysis for Hit/Miss Data

E2663-14(2018) Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Ultrasonic Test Methods

E3022-18 Standard Practice for Measurement of Emission Characteristics and Requirements for LED UV-A Lamps Used in Fluorescent Penetrant and Magnetic Particle Testing

E3169-18 Standard Guide for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE)

E3167/E3167M-18 Standard Practice for Conventional Pulse-Echo Ultrasonic Testing of Polyethylene Electrofusion Joints

E3170/E3170M-18 Standard Practice for Phased Array Ultrasonic Testing of Polyethylene Electrofusion Joints

E2491-13(2018) Standard Guide for Evaluating Performance Characteristics of Phased-Array Ultrasonic Testing Instruments and Systems

E3101-18 Standard Practice for Microwave Examination of Polyethylene Butt Fusion Joints

E3102-18 Standard Practice for Microwave Examination of Polyethylene Electrofusion Joints Used in Piping Application

E2446-16 Standard Practice for Manufacturing Characterization of Computed Radiography Systems

E2907/E2907M-13(2019) Standard Practice for Examination of Paper Machine Rolls Using Acoustic Emission from Crack Face Rubbing

E3213-19 Standard Practice for Part-to-Itself Examination Using Process Compensated Resonance Testing Via Swept Sine Input for Metallic and Non-Metallic Parts

E2985/E2985M-14(2019) Standard Practice for Determination of Metal Purity Based on Elastic Constant Measurements Derived from Resonant Ultrasound Spectroscopy

E2737-10(2018) Standard Practice for Digital Detector Array Performance Evaluation and Long-Term Stability

E2738-18 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Computed Radiography (CR) Test Methods

E2983-14(2019) Standard Guide for Application of Acoustic Emission for Structural Health Monitoring

E2698-18e1 Standard Practice for Radiographic Examination Using Digital Detector Arrays

E2581-14(2019) Standard Practice for Shearography of Polymer Matrix Composites and Sandwich Core Materials in Aerospace Applications

E3166-20e1 Standard Guide for Nondestructive Examination of Metal Additively Manufactured Aerospace Parts After Build

E2661/E2661M-20e1 Standard Practice for Acoustic Emission Examination of Plate-like and Flat Panel Composite Structures Used in Aerospace Applications

E2971-16(2020) Standard Test Method for Determination of Effective Boron-10 Areal Density in Aluminum Neutron Absorbers using Neutron Attenuation Measurements

E2861-16(2020) Standard Test Method for Measurement of Beam Divergence and Alignment in Neutron Radiologic Beams

E2700-20 Standard Practice for Contact Ultrasonic Testing of Welds Using Phased Arrays

E2445/E2445M-20 Standard Practice for Performance Evaluation and Long-Term Stability of Computed Radiography Systems

E2374-16(2021) Standard Guide for Acoustic Emission System Performance Verification

E2984/E2984M-21 Standard Practice for Acoustic Emission Examination of High Pressure, Low Carbon, Forged Piping using Controlled Hydrostatic Pressurization

E3052-21 Standard Practice for Examination of Carbon Steel Welds Using An Eddy Current Array

E2598/E2598M-21 Standard Practice for Acoustic Emission Examination of Cast Iron Yankee and Steam Heated Paper Dryers

E2597/E2597M-22 Standard Practice for Manufacturing Characterization of Digital Detector Arrays

E3185-21 Standard Digital Reference Images for Tin Bronze Castings

E3044/E3044M-22 Standard Practice for Ultrasonic Testing of Polyethylene Butt Fusion Joints

E3327/E3327M-21 Standard Guide for the Qualification and Control of the Assisted Defect Recognition of Digital Radiographic Test Data

E3024/E3024M-22a Standard Practice for Magnetic Particle Testing for General Industry

E2934-22 Standard Practice for Digital Imaging and Communication in Nondestructive Evaluation (DICONDE) for Eddy Current (EC) Test Methods

E2884-22 Standard Guide for Eddy Current Testing of Electrically Conducting Materials Using Conformable Sensor Arrays

E3045-22 Standard Practice for Crack Detection Using Vibroacoustic Thermography

E3353-22 Standard Guide for In-Process Monitoring Using Optical and Thermal Methods for Laser Powder Bed Fusion

E2662-15(2022) Standard Practice for Radiographic Examination of Flat Panel Composites and Sandwich Core Materials Used in Aerospace Applications

E2736-17(2022) Standard Guide for Digital Detector Array Radiography

E2906/E2906M-18(2022) Standard Practice for Acoustic Pulse Reflectometry Examination of Tube Bundles

E2929-18(2022) Standard Practice for Guided Wave Testing of Above Ground Steel Piping with Magnetostrictive Transduction

E2478-11(2022) Standard Practice for Determining Damage-Based Design Stress for Glass Fiber Reinforced Plastic (GFRP) Materials Using Acoustic Emission

E3100-22 Standard Guide for Acoustic Emission Examination of Concrete Structures

E2973-22 Standard Digital Reference Images for Inspection of Aluminum and Magnesium Die Castings

E2422-22 Standard Digital Reference Images for Inspection of Aluminum Castings

E2660-22 Standard Digital Reference Images for Investment Steel Castings for Aerospace Applications

E2669-22 Standard Digital Reference Images for Titanium Castings

E2868-22 Standard Digital Reference Images for Steel Castings up to 2 in. (50.8 mm) in Thickness

E2904-22 Standard Practice for Characterization and Verification of Linear Phased Array Ultrasonic Probes

E2375-22 Standard Practice for Ultrasonic Testing of Wrought Products

E3370-22 Standard Practice for Matrix Array Ultrasonic Testing of Composites, Sandwich Core Constructions, and Metals Used in Aerospace Applications