ASTM Volume 03.02, August 2022

Table of Contents

G46-21 Standard Guide for Examination and Evaluation of Pitting Corrosion

G37-98(2021) Standard Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress-Corrosion Cracking Susceptibility of Copper-Zinc Alloys

G39-99(2021) Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens

G186-05(2021) Standard Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause Stress Corrosion Cracking of Brass Alloys

G119-09(2021) Standard Guide for Determining Synergism Between Wear and Corrosion

G196-08(2021) Standard Test Method for Galling Resistance of Material Couples

G50-20 Standard Practice for Conducting Atmospheric Corrosion Tests on Metals

G105-20 Standard Test Method for Conducting Wet Sand/Rubber Wheel Abrasion Tests

G200-20 Standard Test Method for Measurement of Oxidation-Reduction Potential (ORP) of Soil

G220-20 Standard Practice for Replacing Saturated Calomel Reference Electrode (SCE) for Measuring Electrode Potentials

G57-20 Standard Test Method for Measurement of Soil Resistivity Using the Wenner Four-Electrode Method

G218-19 Standard Guide for External Corrosion Protection of Ductile Iron Pipe Utilizing Polyethylene Encasement Supplemented by Cathodic Protection

G32-16(2021)e1 Standard Test Method for Cavitation Erosion Using Vibratory Apparatus

R0006 Condensed Metric Practice Guide for Corrosion (This is not an ASTM Publication)

G129-21 Standard Practice for Slow Strain Rate Testing to Evaluate the Susceptibility of Metallic Materials to Environmentally Assisted Cracking

G44-21 Standard Practice for Exposure of Metals and Alloys by Alternate Immersion in Neutral 3.5 % Sodium Chloride Solution

R0071 Standard Method of Test for Exfoliation Corrosion Susceptibility in 7XXX Series Copper-Containing Aluminum Alloys (Exco Test) (This is not an approved ASTM standard; available as PDF, only)

G204-21 Standard Test Method for Damage to Contacting Solid Surfaces under Fretting Conditions

G106-89(2015) Standard Practice for Verification of Algorithm and Equipment for Electrochemical Impedance Measurements

G112-92(2015) Standard Guide for Conducting Exfoliation Corrosion Tests in Aluminum Alloys

G108-94(2015) Standard Test Method for Electrochemical Reactivation (EPR) for Detecting Sensitization of AISI Type 304 and 304L Stainless Steels

G139-05(2015) Standard Test Method for Determining Stress-Corrosion Cracking Resistance of Heat-Treatable Aluminum Alloy Products Using Breaking Load Method

G123-00(2015) Standard Test Method for Evaluating Stress-Corrosion Cracking of Stainless Alloys with Different Nickel Content in Boiling Acidified Sodium Chloride Solution

G102-89(2015)e1 Standard Practice for Calculation of Corrosion Rates and Related Information from Electrochemical Measurements

G110-92(2015) Standard Practice for Evaluating Intergranular Corrosion Resistance of Heat Treatable Aluminum Alloys by Immersion in Sodium Chloride + Hydrogen Peroxide Solution

G35-98(2015) Standard Practice for Determining the Susceptibility of Stainless Steels and Related Nickel-Chromium-Iron Alloys to Stress-Corrosion Cracking in Polythionic Acids

G58-85(2015) Standard Practice for Preparation of Stress-Corrosion Test Specimens for Weldments

G31-21 Standard Guide for Laboratory Immersion Corrosion Testing of Metals

G142-98(2016) Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both

G103-97(2016) Standard Practice for Evaluating Stress-Corrosion Cracking Resistance of Low Copper 7XXX Series Al-Zn-Mg-Cu Alloys in Boiling 6 % Sodium Chloride Solution

G180-21 Standard Test Method for Corrosion Inhibiting Admixtures for Steel in Concrete by Polarization Resistance in Cementitious Slurries

G133-05(2016) Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear

G188-05(2021) Standard Specification for Leak Detector Solutions Intended for Use on Brasses and Other Copper Alloys

G38-01(2021) Standard Practice for Making and Using C-Ring Stress-Corrosion Test Specimens

G64-99(2021) Standard Classification of Resistance to Stress-Corrosion Cracking of Heat-Treatable Aluminum Alloys

G215-17 Standard Guide for Electrode Potential Measurement

G99-17 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus

G205-16 Standard Guide for Determining Emulsion Properties, Wetting Behavior, and Corrosion-Inhibitory Properties of Crude Oils

G198-17 Standard Test Method for Determining the Relative Corrosion Performance of Driven Fasteners in Contact with Treated Wood

G5-14(2021) Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements

G100-89(2021) Standard Test Method for Conducting Cyclic Galvanostaircase Polarization

G158-98(2021) Standard Guide for Three Methods of Assessing Buried Steel Tanks

G165-99(2017) Standard Practice for Determining Rail-to-Earth Resistance

G77-17 Standard Test Method for Ranking Resistance of Materials to Sliding Wear Using Block-on-Ring Wear Test

G98-17 Standard Test Method for Galling Resistance of Materials

G174-04(2017) Standard Test Method for Measuring Abrasion Resistance of Materials by Abrasive Loop Contact

G171-03(2017) Standard Test Method for Scratch Hardness of Materials Using a Diamond Stylus

G137-97(2017) Standard Test Method for Ranking Resistance of Plastic Materials to Sliding Wear Using a Block-On-Ring Configuration

G168-17 Standard Practice for Making and Using Precracked Double Beam Stress Corrosion Specimens

G176-03(2017) Standard Test Method for Ranking Resistance of Plastics to Sliding Wear Using Block-on-Ring Wear Test—Cumulative Wear Method

G134-17 Standard Test Method for Erosion of Solid Materials by Cavitating Liquid Jet

G148-97(2018) Standard Practice for Evaluation of Hydrogen Uptake, Permeation, and Transport in Metals by an Electrochemical Technique

G91-11(2018) Standard Practice for Monitoring Atmospheric SO2 Deposition Rate for Atmospheric Corrosivity Evaluation

G61-86(2018) Standard Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements for Localized Corrosion Susceptibility of Iron-, Nickel-, or Cobalt-Based Alloys

G96-90(2018) Standard Guide for Online Monitoring of Corrosion in Plant Equipment (Electrical and Electrochemical Methods)

G115-10(2018) Standard Guide for Measuring and Reporting Friction Coefficients

G182-13(2018) Standard Test Method for Determination of the Breakaway Friction Characteristics of Rolling Element Bearings

G164-99(2018) Standard Test Method for Determination of Surface Lubrication on Flexible Webs

G143-03(2018) Standard Test Method for Measurement of Web/Roller Friction Characteristics

G194-08(2018) Standard Test Method for Measuring Rolling Friction Characteristics of a Spherical Shape on a Flat Horizontal Plane

G150-18 Standard Test Method for Electrochemical Critical Pitting Temperature Testing of Stainless Steels and Related Alloys

G219-18 Standard Guide for Determination of Static Coefficient of Friction of Test Couples Using an Inclined Plane Testing Device

G157-98(2018) Standard Guide for Evaluating Corrosion Properties of Wrought Iron- and Nickel-Based Corrosion Resistant Alloys for Chemical Process Industries

G146-01(2018) Standard Practice for Evaluation of Disbonding of Bimetallic Stainless Alloy/Steel Plate for Use in High-Pressure, High-Temperature Refinery Hydrogen Service

G161-00(2018) Standard Guide for Corrosion-Related Failure Analysis

G209-14(2018) Standard Practice for Detecting mu-phase in Wrought Nickel-Rich, Chromium, Molybdenum-Bearing Alloys

G210-13(2018) Standard Practice for Operating the Severe Wastewater Analysis Testing Apparatus

G36-94(2018) Standard Practice for Evaluating Stress-Corrosion-Cracking Resistance of Metals and Alloys in a Boiling Magnesium Chloride Solution

G76-18 Standard Test Method for Conducting Erosion Tests by Solid Particle Impingement Using Gas Jets

G162-18 Standard Practice for Conducting and Evaluating Laboratory Corrosion Tests in Soils

G60-01(2018) Standard Practice for Conducting Cyclic Humidity Exposures

G41-90(2018) Standard Practice for Determining Cracking Susceptibility of Metals Exposed Under Stress to a Hot Salt Environment

G87-02(2018) Standard Practice for Conducting Moist SO2 Tests

G66-99(2018) Standard Test Method for Visual Assessment of Exfoliation Corrosion Susceptibility of 5XXX Series Aluminum Alloys (ASSET Test)

G97-18 Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications

G132-96(2018) Standard Test Method for Pin Abrasion Testing

G81-97a(2018) Standard Test Method for Jaw Crusher Gouging Abrasion Test

G56-18 Standard Test Method for Abrasiveness of Ink-Impregnated Fabric Printer Ribbons and Other Web Materials

G67-18 Standard Test Method for Determining the Susceptibility to Intergranular Corrosion of 5XXX Series Aluminum Alloys by Mass Loss After Exposure to Nitric Acid (NAMLT Test)

G28-02(2015) Standard Test Methods for Detecting Susceptibility to Intergranular Corrosion in Wrought, Nickel-Rich, Chromium-Bearing Alloys

G16-13(2019) Standard Guide for Applying Statistics to Analysis of Corrosion Data

G135-95(2019) Standard Guide for Computerized Exchange of Corrosion Data for Metals

G71-81(2019) Standard Guide for Conducting and Evaluating Galvanic Corrosion Tests in Electrolytes

G4-01(2014) Standard Guide for Conducting Corrosion Tests in Field Applications

G3-14(2019) Standard Practice for Conventions Applicable to Electrochemical Measurements in Corrosion Testing

G49-85(2019) Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens

G140-02(2019) Standard Test Method for Determining Atmospheric Chloride Deposition Rate by Wet Candle Method

B117-19 Standard Practice for Operating Salt Spray (Fog) Apparatus

G1-03(2017)e1 Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens

G85-19 Standard Practice for Modified Salt Spray (Fog) Testing

G47-20 Standard Test Method for Determining Susceptibility to Stress-Corrosion Cracking of 2XXX and 7XXX Aluminum Alloy Products

G69-20 Standard Test Method for Measurement of Corrosion Potentials of Aluminum Alloys

G51-18 Standard Test Method for Measuring pH of Soil for Use in Corrosion Testing

G34-01(2018)e1 Standard Test Method for Exfoliation Corrosion Susceptibility in 2XXX and 7XXX Series Aluminum Alloys (EXCO Test)

G101-04(2020) Standard Guide for Estimating the Atmospheric Corrosion Resistance of Low-Alloy Steels

G33-99(2020) Standard Practice for Recording Data from Atmospheric Corrosion Tests of Metallic-Coated Steel Specimens

G202-12(2020) Standard Test Method for Using Atmospheric Pressure Rotating Cage

G203-10(2020) Standard Guide for Determining Friction Energy Dissipation in Reciprocating Tribosystems

G208-12(2020) Standard Practice for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors Using Jet Impingement Apparatus

G211-14(2020) Standard Test Method for Conducting Elevated Temperature Erosion Tests by Solid Particle Impingement Using Gas Jets

G84-89(2020) Standard Practice for Measurement of Time-of-Wetness on Surfaces Exposed to Wetting Conditions as in Atmospheric Corrosion Testing

G59-97(2020) Standard Test Method for Conducting Potentiodynamic Polarization Resistance Measurements

G187-18 Standard Test Method for Measurement of Soil Resistivity Using the Two-Electrode Soil Box Method

G170-06(2020)e1 Standard Guide for Evaluating and Qualifying Oilfield and Refinery Corrosion Inhibitors in the Laboratory

G192-08(2020)e1 Standard Test Method for Determining the Crevice Repassivation Potential of Corrosion-Resistant Alloys Using a Potentiodynamic-Galvanostatic-Potentiostatic Technique

G199-09(2020)e1 Standard Guide for Electrochemical Noise Measurement

G107-95(2020)e1 Standard Guide for Formats for Collection and Compilation of Corrosion Data for Metals for Computerized Database Input

G116-99(2020)e1 Standard Practice for Conducting Wire-on-Bolt Test for Atmospheric Galvanic Corrosion

G48-11(2020)e1 Standard Test Methods for Pitting and Crevice Corrosion Resistance of Stainless Steels and Related Alloys by Use of Ferric Chloride Solution

G185-06(2020)e1 Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using the Rotating Cylinder Electrode

G184-06(2020)e1 Standard Practice for Evaluating and Qualifying Oil Field and Refinery Corrosion Inhibitors Using Rotating Cage

G52-20 Standard Practice for Exposing and Evaluating Metals and Alloys in Surface Seawater

G78-20 Standard Guide for Crevice Corrosion Testing of Iron-Base and Nickel-Base Stainless Alloys in Seawater and Other Chloride-Containing Aqueous Environments

G92-20 Standard Practice for Characterization of Atmospheric Test Sites

G82-98(2021)e1 Standard Guide for Development and Use of a Galvanic Series for Predicting Galvanic Corrosion Performance

G189-07(2021)e1 Standard Guide for Laboratory Simulation of Corrosion Under Insulation

G206-17(2021)e1 Standard Guide for Measuring the Wear Volumes of Piston Ring Segments Run against Flat Coupons in Reciprocating Wear Tests

G181-21 Standard Test Method for Conducting Friction Tests of Piston Ring and Cylinder Liner Materials Under Lubricated Conditions

G65-16(2021) Standard Test Method for Measuring Abrasion Using the Dry Sand/Rubber Wheel Apparatus

G75-15(2021) Standard Test Method for Determination of Slurry Abrasivity (Miller Number) and Slurry Abrasion Response of Materials (SAR Number)

G73-10(2021) Standard Test Method for Liquid Impingement Erosion Using Rotating Apparatus

G111-21a Standard Guide for Corrosion Tests in High Temperature or High Pressure Environment, or Both

G109-21 Standard Test Methods for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments

B611-21 Standard Test Method for Determining the High Stress Abrasion Resistance of Hard Materials

G193-21 Standard Terminology and Acronyms Relating to Corrosion

G30-22 Standard Practice for Making and Using U-Bend Stress-Corrosion Test Specimens

G217-16(2022) Standard Guide for Corrosion Monitoring in Laboratories and Plants with Coupled Multielectrode Array Sensor Method

G195-22 Standard Guide for Conducting Wear Tests Using a Rotary Platform Abraser

G40-22 Standard Terminology Relating to Wear and Erosion