ASTM Volume 03.01, July 2022

Table of Contents

E1823-21 Standard Terminology Relating to Fatigue and Fracture Testing

E6-15e4 Standard Terminology Relating to Methods of Mechanical Testing

E21-20 Standard Test Methods for Elevated Temperature Tension Tests of Metallic Materials

E1237-20 Standard Guide for Installing Bonded Resistance Strain Gages

E837-20 Standard Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method

E3039-20 Standard Test Method for Determination of Crack-Tip-Opening Angle of Ferritic Steels Using DWTT-Type Specimens

E251-20a Standard Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gages

E1685-20 Standard Practice for Measuring the Change in Length of Bolts Using the Ultrasonic Pulse-Echo Technique

E604-18 Standard Test Method for Dynamic Tear Testing of Metallic Materials

E1077-14(2021) Standard Test Methods for Estimating the Depth of Decarburization of Steel Specimens

E2207-15(2021) Standard Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens

E328-21 Standard Test Methods for Stress Relaxation for Materials and Structures

E2860-20 Standard Test Method for Residual Stress Measurement by X-Ray Diffraction for Bearing Steels

E143-20 Standard Test Method for Shear Modulus at Room Temperature

E436-03(2021) Standard Test Method for Drop-Weight Tear Tests of Ferritic Steels

E467-21 Standard Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System

E606/E606M-21 Standard Test Method for Strain-Controlled Fatigue Testing

E643-15 Standard Test Method for Ball Punch Deformation of Metallic Sheet Material

E2428-15a Standard Practice for Calibration and Verification of Torque Transducers

E2712-15 Standard Test Methods for Bulge-Forming Superplastic Metallic Sheet

E466-21 Standard Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials

E2218-15 Standard Test Method for Determining Forming Limit Curves

E739-10(2015) Standard Practice for Statistical Analysis of Linear or Linearized Stress-Life (S-N) and Strain-Life (ε-N) Fatigue Data

E2142-08(2015) Standard Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope

E2546-15 Standard Practice for Instrumented Indentation Testing

E1949-21 Standard Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages

E1875-20a Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance

E1319-21 Standard Guide for High-Temperature Static Strain Measurement

E855-21 Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading

E2567-16a Standard Test Method for Determining Nodularity And Nodule Count In Ductile Iron Using Image Analysis

E740/E740M-03(2016) Standard Practice for Fracture Testing with Surface-Crack Tension Specimens

E1450-16 Standard Test Method for Tension Testing of Structural Alloys in Liquid Helium

E238-17a Standard Test Method for Pin-Type Bearing Test of Metallic Materials

E103-17 Standard Practice for Rapid Indentation Hardness Testing of Metallic Materials

E81-96(2017) Standard Test Method for Preparing Quantitative Pole Figures

E1180-08(2021) Standard Practice for Preparing Sulfur Prints for Macrostructural Evaluation

E986-04(2017) Standard Practice for Scanning Electron Microscope Beam Size Characterization

E883-11(2017) Standard Guide for Reflected–Light Photomicrography

E1049-85(2017) Standard Practices for Cycle Counting in Fatigue Analysis

E1304-97(2020) Standard Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials

E132-17 Standard Test Method for Poisson’s Ratio at Room Temperature

E2624-17 Standard Practice for Torque Calibration of Testing Machines

E190-21 Standard Test Method for Guided Bend Test for Ductility of Welds

E1245-03(2016) Standard Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis

E2658-15 Standard Practices for Verification of Speed for Material Testing Machines

E930-18 Standard Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)

E517-19 Standard Test Method for Plastic Strain Ratio r for Sheet Metal

E209-18 Standard Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates

E9-19 Standard Test Methods of Compression Testing of Metallic Materials at Room Temperature

E468-18 Standard Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials

E646-16 Standard Test Method for Tensile Strain-Hardening Exponents (n -Values) of Metallic Sheet Materials

E3097-17 Standard Test Method for Mechanical Uniaxial Constant Force Thermal Cycling of Shape Memory Alloys

E3098-17 Standard Test Method for Mechanical Uniaxial Pre-strain and Thermal Free Recovery of Shape Memory Alloys

E1382-97(2015) Standard Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis

E2245-11(2018) Standard Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer

E2244-11(2018) Standard Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer

E2444-11(2018) Standard Terminology Relating to Measurements Taken on Thin, Reflecting Films

E2246-11(2018) Standard Test Method for Strain Gradient Measurements of Thin, Reflecting Films Using an Optical Interferometer

E2208-02(2018)e1 Standard Guide for Evaluating Non-Contacting Optical Strain Measurement Systems

E83-16 Standard Practice for Verification and Classification of Extensometer Systems

E2298-18 Standard Test Method for Instrumented Impact Testing of Metallic Materials

E2443-05(2018)e1 Standard Guide for Verifying Computer-Generated Test Results Through The Use Of Standard Data Sets

E2448-18 Standard Test Method for Determining the Superplastic Properties of Metallic Sheet Materials

E92-17 Standard Test Methods for Vickers Hardness and Knoop Hardness of Metallic Materials

E2248-18 Standard Test Method for Impact Testing of Miniaturized Charpy V-notch Specimens

E140-12B(2019)e1 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, Scleroscope Hardness, and Leeb Hardness

E384-17 Standard Test Method for Microindentation Hardness of Materials

E647-15e1 Standard Test Method for Measurement of Fatigue Crack Growth Rates

E23-18 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials

E2368-10(2017) Standard Practice for Strain Controlled Thermomechanical Fatigue Testing

E139-11(2018) Standard Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials

E1012-19 Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application

E1181-02(2015) Standard Test Methods for Characterizing Duplex Grain Sizes

E3-11(2017) Standard Guide for Preparation of Metallographic Specimens

E407-07(2015)e1 Standard Practice for Microetching Metals and Alloys

E10-18 Standard Test Method for Brinell Hardness of Metallic Materials

E1268-19 Standard Practice for Assessing the Degree of Banding or Orientation of Microstructures

E3076-18 Standard Practice for Determination of the Slope in the Linear Region of a Test Record

E74-18e1 Standard Practices for Calibration and Verification for Force-Measuring Instruments

E45-18a Standard Test Methods for Determining the Inclusion Content of Steel

E340-15 Standard Practice for Macroetching Metals and Alloys

E292-18 Standard Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials

E768-99(2018) Standard Guide for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel

E1951-14(2019) Standard Guide for Calibrating Reticles and Light Microscope Magnifications

E1426-14(2019)e1 Standard Test Method for Determining the X-Ray Elastic Constants for Use in the Measurement of Residual Stress Using X-Ray Diffraction Techniques

E1928-13(2019) Standard Practice for Estimating the Approximate Residual Circumferential Stress in Straight Thin-walled Tubing

E2818-11(2019) Standard Practice for Determination of Quasistatic Fracture Toughness of Welds

E1942-98(2018)e1 Standard Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing

E7-17 Standard Terminology Relating to Metallography

E82/E82M-14(2019) Standard Test Method for Determining the Orientation of a Metal Crystal

E766-14(2019) Standard Practice for Calibrating the Magnification of a Scanning Electron Microscope

E1508-12a(2019) Standard Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy

E111-17 Standard Test Method for Young’s Modulus, Tangent Modulus, and Chord Modulus

E2283-08(2019) Standard Practice for Extreme Value Analysis of Nonmetallic Inclusions in Steel and Other Microstructural Features

E2627-13(2019) Standard Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials

E345-16 Standard Test Methods of Tension Testing of Metallic Foil

E2309/E2309M-20 Standard Practices for Verification of Displacement Measuring Systems and Devices Used in Material Testing Machines

E4-21 Standard Practices for Force Calibration and Verification of Testing Machines

E2714-13(2020) Standard Test Method for Creep-Fatigue Testing

E1221-12A(2018)e1 Standard Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, KIa, of Ferritic Steels

E2472-12(2018)e1 Standard Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions

E2899-19e1 Standard Test Method for Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending

E1457-19e1 Standard Test Method for Measurement of Creep Crack Growth Times in Metals

E2760-19e1 Standard Test Method for Creep-Fatigue Crack Growth Testing

E290-14 Standard Test Methods for Bend Testing of Material for Ductility

E110-14 Standard Test Method for Rockwell and Brinell Hardness of Metallic Materials by Portable Hardness Testers

E562-19e1 Standard Test Method for Determining Volume Fraction by Systematic Manual Point Count

E1681-03(2020) Standard Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials

E1351-01(2020) Standard Practice for Production and Evaluation of Field Metallographic Replicas

E2014-17 Standard Guide on Metallographic Laboratory Safety

E208-20 Standard Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels

E1561-20 Standard Practice for Analysis of Strain Gage Rosette Data

E2015-04(2021) Standard Guide for Preparation of Plastics and Polymeric Specimens for Microstructural Examination

E2109-01(2021) Standard Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings

E1920-03(2021) Standard Guide for Metallographic Preparation of Thermal Sprayed Coatings

E1558-09(2021) Standard Guide for Electrolytic Polishing of Metallographic Specimens

E112-13(2021) Standard Test Methods for Determining Average Grain Size

E1856-13(2021) Standard Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines

E2789-10(2021) Standard Guide for Fretting Fatigue Testing

E915-21 Standard Practice for Verifying the Alignment of X-Ray Diffraction Instruments for Residual Stress Measurement

E633-21a Standard Guide for Use of Thermocouples in Elevated-Temperature Mechanical Testing

E1921-21a Standard Test Method for Determination of Reference Temperature, T0, for Ferritic Steels in the Transition Range

E2948-22 Standard Test Method for Conducting Rotating Bending Fatigue Tests of Solid Round Fine Wire

E1820-21 Standard Test Method for Measurement of Fracture Toughness

E18-22 Standard Test Methods for Rockwell Hardness of Metallic Materials

E3246-22 Standard Test Methods for Differential Indentation Depth Hardness of Metallic Materials

E381-22 Standard Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings

E561-22 Standard Test Method for KR Curve Determination

E399-22 Standard Test Method for Linear-Elastic Plane-Strain Fracture Toughness of Metallic Materials

E1876-22 Standard Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration

E8/E8M-22 Standard Test Methods for Tension Testing of Metallic Materials