Journal of ASTM International 2004-2012 Backfile

Journal of ASTM International 2004-2012 Backfile

About this journal

The Journal of ASTM International is a multi-disciplinary forum to serve the international scientific and engineering community through the timely publication of the results of original research and critical review articles in the physical and life sciences and engineering technologies. These peer-reviewed papers cover diverse topics relevant to the science and research that establish the foundation for standards development within ASTM International.

NOTE: This journal ceased publication in 2012. The full backfile from 2004-2012 is available for purchase.

Editorial Objectives
  • To publish theoretical and empirical models of the physical, chemical, and mechanical behavior of materials, processes, and systems.
  • To report on experimental investigations to characterize the performance of materials, processes, and products.
Content

Journal of ASTM International includes solicited and unsolicited technical papers as well as those qualified papers presented at ASTM Symposia and workshops. These papers cover a broad range of topics including:

  • Materials Performance and Characterization
  • Nuclear Science and Technology
  • Civil Engineering and Building Materials
  • Petroleum and Chemical Engineering
  • Environmental Science and Technology
  • General Technology
  • Medical, Health, Safety, and Forensic Science
Abstracting & Indexing Information
  • CAB Abstracts
  • Chemical Abstract Service® (CAS)
  • Compendex
  • Paper Chem
  • T R I S Electronic Bibliographic Data Base

Issues

2012

2011

2010

2009

2008

2007

2006

2005

2004

Editorial Board

Editor-in-Chief

Dr. Sheldon W. Dean, Jr., Dean Corrosion Technology, Inc., Glen Mills, PA

Materials Performance and Characterization

Associate Editor: Dr. Richard W. Neu, Georgia Institute of Technology, Atlanta, GA

Civil Engineering and Building Materials

Associate Editor: Dr. Leslie Struble, University of Illinois, Urbana, IL

Petroleum and Chemical Engineering

Associate Editor: Dr. George E. Totten, G. E. Totten Associates, Seattle, WA

Nuclear Science and Technology

Associate Editor: Dr. Arthur Moses Thompson Motta, Pennsylvania State University, University Park, PA

Environmental Science and Technology

Associate Editor: Dr. John Sherwell, Maryland Power Plant Research Program, Annapolis, MD

Medical, Health, Safety, and Forensic Science

Associate Editor: Dr. J. Graham Rankin, Marshall University, Huntington, WV

General Technology

Associate Editor: Dr. K. Lawrence DeVries, University of Utah, Salt Lake City, UT

Editorial Board Members

  • Mr. Chuck Bell, The Green Team, Inc. Tulsa, OK
  • Alison Kinn Bennett, US EPA Office of Pollution Prevention and Toxics, Washington, D.C.
  • Dr. Donald S. Bloswick, University of Utah, Salt Lake City, UT
  • Dr. E. Ray Brown, Auburn University, Auburn, AL
  • Dr. Stephen M. Bruemmer, Pacific Northwest National Lab., Richland, WA
  • Mr. Kenneth G. Budinski, Bud Labs, Rochester, NY
  • Prof. Lauralice Canale, EESC-Universidade de Sao Paulo, Av Trabalhador Sao carlense, 400, Sao Carlos SP Brazil CEP 13566-590
  • Brian P. Cochran, Brian P. Cochran & Associates, LLC, Wabash, IN
  • Mr. Hany W. Demian, U.S. Food and Drug Administration, Center for Devices and Radiological Health, Rockville, MD
  • Dr. Norman E. Dowling, Virginia Polytechnic Institute and State University, Blacksburg, VA
  • Mr. Thomas R. Dulski, Sinking Spring, PA
  • Dr. Richard John Farris, University of Massachusetts, Amherst, MA
  • Dr. Richard J. Fields, NIST, Grayson, GA
  • Dr. Gary Fischman, Consultant, Palatine, IL
  • Mr. James D. Fritz, TMR Stainless, 3209 McKnight East Drive, Pittsburgh, PA 15237
  • Ms. Sheila Glesmann, Emission Strategies, Inc., Severna Park, MD
  • Mr. Robert J. Glodowski, Strategic Minerals Corporation, Pittsburgh, PA
  • Dr. Stephen M. Graham, Department of Mechanical Engineering United States Naval Academy, Annapolis, MD
  • Dr. Lawrence R. Greenwood, Battelle Pacific Northwest National Laboratory, Richland, WA
  • Dr. Warren O. Haggard, University of Memphis, Herff College of Engineering, Memphis, TN
  • Dr. William Harrigan, Jr., MMC Engineering, Inc., Northridge, CA
  • Mr. Robert S. Hastings,Materials Research, DePuy Orthopaedics Inc., Warsaw, IN
  • Dr. Raymond T. Hemmings, Hemmings & Associates, Kennesaw, GA
  • Dr. Andrew John Hewitt, University of Queensland, Gatton, Australia
  • Dr. Robert J. Johnson, University of Vermont, Burlington, VT
  • Dr. William Steven Johnson, Georgia Institute of Technology, Atlanta, GA
  • Dr. Anthony James Kinloch, University of London, London, UK
  • Dr. Chiken Kinoshita, Kyushu University, Fukuoka Japan
  • Dr. Fred Klaessig, Pennsylvania Bio Nano Systems, Doylestown, PA
  • Dr. Nikolai Kobasko, Technologies Inc., Director of Technology and R&D, P.O. Box 1787, Akron, OH 44309-1787
  • Dr. Liisa T. Kuhn, Center for Biomaterials and Regenerative Medicine, University of Connecticut Health Center, Farmington, CT
  • Dr. Cato T. Laurencin, School of Medicine, The University of Conneticut, Farmington, CT
  • Dr. Roberto Lopez-Anido, University of Maine, Orono, ME
  • Dr. Reto Luginbüehl, RMS Foundation, Bettlach, CH
  • Dr. Jianbin Luo, State Key Laboratory of Tribology, Tsinghua University, Beijing, China
  • Prof. Xinmin Luo, Jiangsu University, School of Material Science and Engineereing, 301 Xuefu Road, Zhenjiang, Jiangsu 212013, China
  • Mr. David McCrindle, Brantford, Ontario, Canada
  • Ms. Marybeth Miceli, Miceli Infrastructure Consulting, LLC, Los Angeles, CA, USA
  • Dr. Eric J. Mittemeijer, Max Planck Institute for Metals Research, Stuttgart, Germany
  • Dr. Kishore Nadkarni, Millenium Analysis, Inc., East Brunswick, NJ
  • Dr. Niren L. Nagda, ENERGEN Consulting, Inc., Germantown, MD
  • Dr. Joseph William Newkirk, University of Missouri-Rolla, Rolla, MA
  • Mr. Kenneth E. Orie, Hidden Valley, PA
  • Dr. K. Narayan Prabhu, National Institute of Technology Karnataka Surathkal, Karnataka State, India
  • Prof. Martin Priest, University of Leeds, School of Mechanical Engineering, Leeds, LS2 9JT, UNITED KINGDOM
  • Dr. In-Sik Rhee, US Army RDECOM-TARDEC, Warren, MI
  • Barbara Rivolta, Ph. D., Politecnico di Milano, Milano Italy
  • Dr. Satyam Sahay, Technology Manager, John Deere Technology Center India, Tower XIV, Cybercity, Magarpatta City, Pune 411 013, India
  • Dr. Paul E. Sample, Samples, Inc., Wilmington, DE
  • Mr. Salman Sheikh, Fossil Consulting Services, Columbia, MD
  • Dr. Preet Singh, Georgia Institute of Technology, Atlanta, GA
  • Mr. John S. Snodgrass, Corrosion Consultant, Greensburg, PA
  • Dr. Mikhail A. Sokolov, Oak Ridge National Laboratory, Oak Ridge, TN
  • Dr. Mark T. Southerland, Versar, Inc., Columbia, MD
  • Dr. Constantinos Soutis, University of Sheffield, Sheffield, United Kingdom
  • Theodore A. Steinberg, Queensland University of Technology, Brisbane, Queensland, Australia
  • Mr. Paul Stutzman, National Institute of Standards and Technology, Building226, Room #B348, Gaithersburg, MD 20899
  • Dr. Peter Taylor, Associate Director, National Concrete Pavement Technology Center, 2711 S. Loop Drive #4700 Ames, IA 50010
  • Dr. Kenneth J. Walsh, Science Applications International Corp., Raleigh, NC
  • Dr. Kejin Wang,Iowa State University, Dept of Civil, Const, & Env Engineering, Ames, IA
  • Mr. Steven R. Westbrook, Southwest Research Institute, San Antonio, TX
  • Dr. Paul K. Whitcraft, Rolled Alloys, Temperance, MI
  • Mr. Tim Williams, Rolls-Royce, PLC, Derby, UK
  • Dr. Mathias Woydt, Federal Institute for Materials Research and Testing (BAM), Berlin, Germany
  • Dr. Pascal Yvon, CEA-Saclay, Cedex, France
  • Xiong Yu, Case Western Reserve University, Cleveland, OH

Publish with ASTM

ASTM no longer accepts submissions to this journal. Please visit Advances in Civil Engineering Materials, Geotechnical Testing Journal, Journal of Testing and Evaluation or Materials Performance and Characterization to view their scopes and submission guidelines.

Subscription Information

Individual*

How does it work?

You receive a User ID and Password to login to your subscription.

Online only: $265

*Individual subscriptions provide single user access for 12 months via username and password.

Individual article downloads available for $25 directly from the website

Institutional**

How does it work?

Access is by IP address.

Online only: $524

Please contact Sales or call 1-877-909-ASTM.
**Institutional subscriptions provide single site (one geographic location) access for 12 months via IP address.

For Multi-site subscription and pricing, please contact Sales or call 1-877-909-ASTM.

Subscription Period

This subscription ends 12 months from the day your order is processed.

Read ASTM License Agreement
Details
E-ISSN: 1546-962X
Coden: JAIOAD