New Standards

A991/A991M-17 Standard Test Method for Conducting Temperature Uniformity Surveys of Furnaces Used to Heat Treat Steel Products

B124/B124M-17 Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes

B138/B138M-11(2017) Standard Specification for Manganese Bronze Rod, Bar, and Shapes

B139/B139M-12(2017) Standard Specification for Phosphor Bronze Rod, Bar, and Shapes

B140/B140M-12(2017) Standard Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes

B150/B150M-12(2017) Standard Specification for Aluminum Bronze Rod, Bar, and Shapes

B163-11(2017) Standard Specification for Seamless Nickel and Nickel Alloy Condenser and Heat-Exchanger Tubes

B206/B206M-12(2017) Standard Specification for Copper-Nickel-Zinc (Nickel Silver) Wire and Copper-Nickel Alloy Wire

B249/B249M-17 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings

B283/B283M-17 Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)

B535-06(2017) Standard Specification for Nickel-Iron-Chromium-Silicon Alloys (UNS N08330 and N08332) Seamless Pipe and Tube

B644-11(2017) Standard Specification for Copper Alloy Addition Agents

B805-06(2017)e1 Standard Specification for Precipitation Hardening Nickel Alloys Bar and Wire

B829-04a(2017) Standard Specification for General Requirements for Nickel and Nickel Alloys Seamless Pipe and Tube

B924-02(2017) Standard Specification for Seamless and Welded Nickel Alloy Condenser and Heat Exchanger Tubes With Integral Fins

B927/B927M-17 Standard Specification for Brass Rod, Bar, and Shapes

C150/C150M-17 Standard Specification for Portland Cement

C595/C595M-17 Standard Specification for Blended Hydraulic Cements

E122-17 Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process

E648-17 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source

E814-13a(2017) Standard Test Method for Fire Tests of Penetration Firestop Systems

E2032-09(2017) Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119

E2837-13(2017) Standard Test Method for Determining the Fire Resistance of Continuity Head-of-Wall Joint Systems Installed Between Rated Wall Assemblies and Nonrated Horizontal Assemblies

A128/A128M-93(2017) Standard Specification for Steel Castings, Austenitic Manganese

A194/A194M-17 Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both

A209/A209M-03(2017) Standard Specification for Seamless Carbon-Molybdenum Alloy-Steel Boiler and Superheater Tubes

A213/A213M-17 Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes

A276/A276M-17 Standard Specification for Stainless Steel Bars and Shapes

A312/A312M-17 Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes

A320/A320M-17 Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service

A387/A387M-17 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum

A469/A469M-07(2017) Standard Specification for Vacuum-Treated Steel Forgings for Generator Rotors

A472/A472M-07(2017) Standard Specification for Heat Stability of Steam Turbine Shafts and Rotor Forgings

A479/A479M-17 Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

A494/A494M-17 Standard Specification for Castings, Nickel and Nickel Alloy

A565/A565M-10(2017)e1 Standard Specification for Martensitic Stainless Steel Bars for High-Temperature Service

A582/A582M-12(2017) Standard Specification for Free-Machining Stainless Steel Bars

A604/A604M-07(2017) Standard Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets

A765/A765M-07(2017) Standard Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements

A789/A789M-17 Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service

A829/A829M-17 Standard Specification for Alloy Structural Steel Plates

A903/A903M-99(2017) Standard Specification for Steel Castings, Surface Acceptance Standards, Magnetic Particle and Liquid Penetrant Inspection

A955/A955M-17 Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement

A1016/A1016M-17 Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes

A1064/A1064M-17 Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete

A1106/A1106M-17 Standard Specification for Pressure Vessel Plate, Alloy Steel, Austenitic High Manganese for Cryogenic Application

F2437/F2437M-17 Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs

C94/C94M-17 Standard Specification for Ready-Mixed Concrete

D1739-98(2017) Standard Test Method for Collection and Measurement of Dustfall (Settleable Particulate Matter)

D5677-17 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines

D6032/D6032M-17 Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core

D6938-17 Standard Test Methods for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)

F3148-17 Standard Specification for High Strength Structural Bolt Assemblies, Steel and Alloy Steel, Heat Treated, 144ksi Minimum Tensile Strength, Inch Dimensions

F1057-17 Standard Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique

A579/A579M-17 Standard Specification for Superstrength Alloy Steel Forgings

C39/C39M-17 Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens

C138/C138M-17 Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete

C231/C231M-17 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method

D1140-17 Standard Test Methods for Determining the Amount of Material Finer than 75-μm (No. 200) Sieve in Soils by Washing

D1291-17 Standard Practice for Estimation of Chlorine Demand of Water

D2937-17 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method

D2937-17e1 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method

D2980-17 Standard Test Method for Saturated Density, Moisture-Holding Capacity, and Porosity of Saturated Peat Materials

D4453-17 Standard Practice for Handling of High Purity Water Samples

D4643-17 Standard Test Method for Determination of Water Content of Soil and Rock by Microwave Oven Heating

D5080-17 Standard Test Method for Rapid Determination of Percent Compaction

D7045-17 Standard Guide for Optimization of Groundwater Monitoring Constituents for Detection Monitoring Programs for Waste Disposal Facilities

D7682-17 Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty

E3084-17 Standard Practice for Characterizing Particle Irradiations of Materials in Terms of Non-Ionizing Energy Loss (NIEL)

D425-17 Standard Test Method for Centrifuge Moisture Equivalent of Soils

E478-08(2017) Standard Test Methods for Chemical Analysis of Copper Alloys

E1335-08(2017) Standard Test Methods for Determination of Gold in Bullion by Fire Assay Cupellation Analysis

A370-17 Standard Test Methods and Definitions for Mechanical Testing of Steel Products

A775/A775M-17 Standard Specification for Epoxy-Coated Steel Reinforcing Bars

B1001-17 Standard Specification for Copper Electrode Wire Used for Welding Seams of Steel Cans

C29/C29M-17 Standard Test Method for Bulk Density (“Unit Weight”) and Voids in Aggregate

C803/C803M-17 Standard Test Method for Penetration Resistance of Hardened Concrete

C833-17 Standard Specification for Sintered (Uranium-Plutonium) Dioxide Pellets for Light Water Reactors

C856-17 Standard Practice for Petrographic Examination of Hardened Concrete

C1308-08(2017) Standard Test Method for Accelerated Leach Test for Diffusive Releases from Solidified Waste and a Computer Program to Model Diffusive, Fractional Leaching from Cylindrical Waste Forms

C1316-08(2017) Standard Test Method for Nondestructive Assay of Nuclear Material in Scrap and Waste by Passive-Active Neutron Counting Using 252Cf Shuffler

C1500-08(2017) Standard Test Method for Nondestructive Assay of Plutonium by Passive Neutron Multiplicity Counting

C1514-08(2017) Standard Test Method for Measurement of 235U Fraction Using Enrichment Meter Principle

C1672-17 Standard Test Method for Determination of Uranium or Plutonium Isotopic Composition or Concentration by the Total Evaporation Method Using a Thermal Ionization Mass Spectrometer

D4043-17 Standard Guide for Selection of Aquifer Test Method in Determining Hydraulic Properties by Well Techniques

D5786-17 Standard Practice for (Field Procedure) for Constant Drawdown Tests in Flowing Wells for Determining Hydraulic Properties of Aquifer Systems

D6028-17 Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer Taking into Consideration Storage of Water in Leaky Confining Beds by Modified Hantush Method

D6029-17 Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer and a Leaky Confining Bed with Negligible Storage by the Hantush-Jacob Method

D6034-17 Standard Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test

D6170-17 Standard Guide for Selecting a Groundwater Modeling Code

D6312-17 Standard Guide for Developing Appropriate Statistical Approaches for Groundwater Detection Monitoring Programs at Waste Disposal Facilities

D7467-17 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)

E2748-12a(2017) Standard Guide for Fire-Resistance Experiments

C94/C94M-16b Standard Specification for Ready-Mixed Concrete

C1740-16 Standard Practice for Evaluating the Condition of Concrete Plates Using the Impulse-Response Method

C1843-16 Standard Test Method for Determining Moisture Content in Uranium-Ore Concentrate

C1844-16 Standard Test Method for Determination of Uranium in Urine by Inductively Coupled Plasma Mass Spectrometer Following Nitric Acid Dilution

D7510-10(2016)e1 Standard Practice for Performing Detection and Quantitation Estimation and Data Assessment Utilizing DQCALC Software, based on ASTM Practices D6091 and D6512 of Committee D19 on Water

D7751-16 Standard Test Method for Determination of Additive Elements in Lubricating Oils by EDXRF Analysis

D8049-16a Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer

E162-16 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source

F3226/F3226M-16 Standard Specification for Metallic Press-Connect Fittings for Piping and Tubing Systems

F3226/F3226M-16e1 Standard Specification for Metallic Press-Connect Fittings for Piping and Tubing Systems

A194/A194M-16a Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both

A234/A234M-16 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service

A240/A240M-16a Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications

A291/A291M-16a Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears

A356/A356M-16 Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines

A372/A372M-16 Standard Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels

A480/A480M-16b Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

A671/A671M-16a Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures

A733-16 Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples

A781/A781M-16 Standard Specification for Castings, Steel and Alloy, Common Requirements, for General Industrial Use

A788/A788M-16a Standard Specification for Steel Forgings, General Requirements

A881/A881M-16a Standard Specification for Steel Wire, Indented, Low-Relaxation for Prestressed Concrete

A886/A886M-16 Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete

A910/A910M-16 Standard Specification for Uncoated, Weldless, 2-Wire and 3-Wire Steel Strand for Prestressed Concrete

A960/A960M-16a Standard Specification for Common Requirements for Wrought Steel Piping Fittings

A961/A961M-16a Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications

A962/A962M-16b Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range

A985/A985M-16 Standard Specification for Steel Investment Castings General Requirements, for Pressure-Containing Parts

A1002-16 Standard Specification for Castings, Nickel-Aluminum Ordered Alloy

A1055/A1055M-16 Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars

A1103/A1103M-16 Standard Specification for Seamless Cold-Finished Carbon Steel Structural Frame Tubing for Automotive Racing Applications

C40/C40M-16 Standard Test Method for Organic Impurities in Fine Aggregates for Concrete

C78/C78M-15b Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)

C457/C457M-16 Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete

C1105-08a(2016) Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction

D4623-16 Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method—Three Component Borehole Deformation Gauge

D4625-16 Standard Test Method for Middle Distillate Fuel Storage Stability at 43 °C (110 °F)

D4628-16 Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry

D4971-16 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Using Diametrically Loaded 76-mm (3-in.) Borehole Jack

D5064-16a Standard Practice for Conducting a Patch Test to Assess Coating Compatibility

D5367-16 Standard Practice for Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used to Prevent Flash Rusting of Steel When Water or Water/Abrasive Blasted

D5607-16 Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force

D5731-16 Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications

D6217-11(2016) Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration

D6285-99(2016) Standard Guide for Locating Abandoned Wells

D7111-16 Standard Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

E185-16 Standard Practice for Design of Surveillance Programs for Light-Water Moderated Nuclear Power Reactor Vessels

E523-16 Standard Test Method for Measuring Fast-Neutron Reaction Rates by Radioactivation of Copper

E706-16 Standard Master Matrix for Light-Water Reactor Pressure Vessel Surveillance Standards

E720-16 Standard Guide for Selection and Use of Neutron Sensors for Determining Neutron Spectra Employed in Radiation-Hardness Testing of Electronics

E721-16 Standard Guide for Determining Neutron Energy Spectra from Neutron Sensors for Radiation-Hardness Testing of Electronics

E942-16 Standard Guide for Investigating the Effects of Helium in Irradiated Metals

E1820-16 Standard Test Method for Measurement of Fracture Toughness

E1941-10(2016) Standard Test Method for Determination of Carbon in Refractory and Reactive Metals and Their Alloys by Combustion Analysis

E2215-16 Standard Practice for Evaluation of Surveillance Capsules from Light-Water Moderated Nuclear Power Reactor Vessels

F835-16 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws

A6/A6M-16a Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling

A1098/A1098M-16 Standard Specification for Welded Austenitic Alloy Steel Boiler, Superheater, Condenser, and Heat Exchanger Tubes with Textured Surface(s)

D5092/D5092M-16 Standard Practice for Design and Installation of Groundwater Monitoring Wells

D5298-16 Standard Test Method for Measurement of Soil Potential (Suction) Using Filter Paper

D6836-16 Standard Test Methods for Determination of the Soil Water Characteristic Curve for Desorption Using Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, or Centrifuge

D6914/D6914M-16 Standard Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices

D8037/D8037M-16 Standard Practice for Direct Push Hydraulic Logging for Profiling Variations of Permeability in Soils

D8070-16 Standard Test Method for Screening of Fuels and Fuel Associated Aqueous Specimens for Microbial Contamination by Lateral Flow Immunoassay

A1100-16 Standard Guide for Qualification and Control of Induction Heat Treating

B769-11(2016) Standard Test Method for Shear Testing of Aluminum Alloys

B985-12(2016) Standard Practice for Sampling Aluminum Ingots, Billets, Castings and Finished or Semi-Finished Wrought Aluminum Products for Compositional Analysis

C582-09(2016) Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment

C852/C852M-16 Standard Guide for Design Criteria for Plutonium Gloveboxes

D1452/D1452M-16 Standard Practice for Soil Exploration and Sampling by Auger Borings

D2122-16 Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings

D3967-16 Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens

D4644-16 Standard Test Method for Slake Durability of Shales and Other Similar Weak Rocks

D6898-03(2016) Standard Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig

D7070-16 Standard Test Methods for Creep of Rock Core Under Constant Stress and Temperature

D7168-16 Standard Test Method for 99Tc in Water by Solid Phase Extraction Disk

D7727-11(2016) Standard Practice for Calculation of Dose Equivalent Xenon (DEX) for Radioactive Xenon Fission Products in Reactor Coolant

E1479-16 Standard Practice for Describing and Specifying Inductively Coupled Plasma Atomic Emission Spectrometers

E1529-16 Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies

E2586-16 Standard Practice for Calculating and Using Basic Statistics

E3080-16 Standard Practice for Regression Analysis

F1511-16 Standard Specification for Mechanical Seals for Shipboard Pump Applications

A1035/A1035M-16b Standard Specification for Deformed and Plain, Low-Carbon, Chromium, Steel Bars for Concrete Reinforcement

B824-16 Standard Specification for General Requirements for Copper Alloy Castings

A574-16 Standard Specification for Alloy Steel Socket-Head Cap Screws

B30-16 Standard Specification for Copper Alloys in Ingot Form

B88-16 Standard Specification for Seamless Copper Water Tube

B88M-16 Standard Specification for Seamless Copper Water Tube (Metric)

B111/B111M-16 Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock

B124/B124M-16a Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes

B249/B249M-16 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings

B250/B250M-16 Standard Specification for General Requirements for Wrought Copper Alloy Wire

B283/B283M-16a Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)

B395/B395M-16 Standard Specification for U-Bend Seamless Copper and Copper Alloy Heat Exchanger and Condenser Tubes

B441-16 Standard Specification for Copper-Cobalt-Beryllium, Copper-Nickel-Beryllium, and Copper-Nickel-Lead-Beryllium Rod and Bar (UNS Nos. C17500, C17510, and C17465)

B570-16 Standard Specification for Copper-Beryllium Alloy (UNS Nos. C17000 and C17200) Forgings and Extrusions

B637-16 Standard Specification for Precipitation-Hardening and Cold Worked Nickel Alloy Bars, Forgings, and Forging Stock for Moderate or High Temperature Service

B643-12(2016) Standard Specification for Copper-Beryllium Alloy Seamless Tube

B698/B698M-10(2016)e1 Standard Classification for Seamless Copper and Copper Alloy Plumbing Pipe and Tube

B944-11(2016) Standard Specification for Copper-Beryllium Welded Heat Exchanger and Condenser Tube (UNS No. C17510)

B967/B967M-16 Standard Specification for Copper-Zinc-Tin-Bismuth Alloy Rod, Bar and Wire

B974/B974M-16 Standard Specification for Free-Cutting Bismuth Brass Rod, Bar and Wire

B983-16 Standard Specification for Precipitation Hardened or Cold Worked, Seamless Nickel Alloy Pipe and Tube

B1003-16 Standard Specification for Seamless Copper Tube for Linesets

C42/C42M-16 Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete

C403/C403M-16 Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance

C1622/C1622M-10(2016)e1 Standard Specification for Cold-Weather Admixture Systems

D322-97(2016) Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation

D396-16 Standard Specification for Fuel Oils

D396-16e1 Standard Specification for Fuel Oils

D975-16a Standard Specification for Diesel Fuel Oils

D2273-08(2016) Standard Test Method for Trace Sediment in Lubricating Oils

D2979-16 Standard Test Method for Pressure-Sensitive Tack of Adhesives Using an Inverted Probe Machine

D3227-16 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)

D3607-08(2016) Standard Test Method for Removing Volatile Contaminants from Used Engine Oils by Stripping

D3843-16 Standard Practice for Quality Assurance for Protective Coatings Applied to Nuclear Facilities

D4177-16 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products

D4177-16e1 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products

D4929-16 Standard Test Method for Determination of Organic Chloride Content in Crude Oil

D5149-02(2016) Standard Test Method for Ozone in the Atmosphere: Continuous Measurement by Ethylene Chemiluminescence

D5156-02(2016) Standard Test Methods for Continuous Measurement of Ozone in Ambient, Workplace, and Indoor Atmospheres (Ultraviolet Absorption)

D5163-16 Standard Guide for Establishing a Program for Condition Assessment of Coating Service Level I Coating Systems in Nuclear Power Plants

D5291-16 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants

D5953M-16 Standard Test Method for Determination of Non-methane Organic Compounds (NMOC) in Ambient Air Using Cryogenic Preconcentration and Direct Flame Ionization Detection

D5980-16 Standard Guide for Selection and Documentation of Existing Wells for Use in Environmental Site Characterization and Monitoring

D6331-16 Standard Test Method for Determination of Mass Concentration of Particulate Matter from Stationary Sources at Low Concentrations (Manual Gravimetric Method)

D7048-16 Standard Guide for Applying Statistical Methods for Assessment and Corrective Action Environmental Monitoring Programs

D7171-16 Standard Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy

D7328-16 Standard Test Method for Determination of Existent and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection

D7548-16a Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products

D7577-12(2016) Standard Test Method for Determining the Accelerated Iron Corrosion Rating of Denatured Fuel Ethanol and Ethanol Fuel Blends

D7758-11(2016) Standard Practice for Passive Soil Gas Sampling in the Vadose Zone for Source Identification, Spatial Variability Assessment, Monitoring, and Vapor Intrusion Evaluations

E261-16 Standard Practice for Determining Neutron Fluence, Fluence Rate, and Spectra by Radioactivation Techniques

E481-16 Standard Test Method for Measuring Neutron Fluence Rates by Radioactivation of Cobalt and Silver

E521-16 Standard Practice for Investigating the Effects of Neutron Radiation Damage Using Charged-Particle Irradiation

E740/E740M-03(2016) Standard Practice for Fracture Testing with Surface-Crack Tension Specimens

E798-16 Standard Practice for Conducting Irradiations at Accelerator-Based Neutron Sources

E821-16 Standard Practice for Measurement of Mechanical Properties During Charged-Particle Irradiation

E1005-16 Standard Test Method for Application and Analysis of Radiometric Monitors for Reactor Vessel Surveillance

E3063-16 Test Method for Antimony Content Using Neutron Activation Analysis (NAA)

F68-16 Standard Specification for Oxygen-Free Copper in Wrought Forms for Electron Devices

F1448-16 Standard Guide for Selection of Security Technology for Protection Against Counterfeiting, Alteration, Diversion, Duplication, Simulation, and Substitution (CADDSS) of Products or Documents

F2401-16 Standard Practice for Security Checkpoint Metal Detector Screening of Persons with Medical Devices

A955/A955M-16a Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement

A1097-16 Standard Specification for Steel Casing Pipe, Electric-Fusion (Arc)-Welded (Outside Diameter of 10 in. and Larger)

E178-16a Standard Practice for Dealing With Outlying Observations

A27/A27M-13(2016) Standard Specification for Steel Castings, Carbon, for General Application

A182/A182M-16a Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

A249/A249M-16a Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes

A268/A268M-10(2016) Standard Specification for Seamless and Welded Ferritic and Martensitic Stainless Steel Tubing for General Service

A312/A312M-16a Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes

A356/A356M-11(2016) Standard Specification for Steel Castings, Carbon, Low Alloy, and Stainless Steel, Heavy-Walled for Steam Turbines

A369/A369M-11(2016) Standard Specification for Carbon and Ferritic Alloy Steel Forged and Bored Pipe for High-Temperature Service

A388/A388M-16a Standard Practice for Ultrasonic Examination of Steel Forgings

A447/A447M-11(2016) Standard Specification for Steel Castings, Chromium-Nickel-Iron Alloy (25-12 Class), for High-Temperature Service

A482/A482M-11(2016) Standard Specification for Ferrochrome-Silicon

A580/A580M-16 Standard Specification for Stainless Steel Wire

A660/A660M-11(2016) Standard Specification for Centrifugally Cast Carbon Steel Pipe for High-Temperature Service

A693-16 Standard Specification for Precipitation-Hardening Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

A767/A767M-16 Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement

A779/A779M-16 Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted for Prestressed Concrete

A788/A788M-16 Standard Specification for Steel Forgings, General Requirements

A789/A789M-16a Standard Specification for Seamless and Welded Ferritic/Austenitic Stainless Steel Tubing for General Service

A909/A909M-06(2016) Standard Specification for Steel Forgings, Microalloy, for General Industrial Use

A945/A945M-16 Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness

A959-16 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels

A981/A981M-11(2016) Standard Test Method for Evaluating Bond Strength for 0.600-in. [15.24-mm] Diameter Steel Prestressing Strand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors

A986/A986M-01(2016) Standard Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings

A999/A999M-16 Standard Specification for General Requirements for Alloy and Stainless Steel Pipe

A1022/A1022M-16b Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement

A1060/A1060M-16b Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete

A1064/A1064M-16b Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete

A1069/A1069M-16 Standard Specification for Laser-Fused Stainless Steel Bars, Plates, and Shapes

C163-05(2016) Standard Practice for Mixing Thermal Insulating Cement Samples

C166-05(2016) Standard Test Method for Covering Capacity and Volume Change Upon Drying of Thermal Insulating Cement

C1723-16 Standard Guide for Examination of Hardened Concrete Using Scanning Electron Microscopy

D975-16 Standard Specification for Diesel Fuel Oils

D3796-09(2016) Standard Practice for Calibration of Type S Pitot Tubes

D5677-16 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines

D6830-02(2016) Standard Test Method for Characterizing the Pressure Drop and Filtration Performance of Cleanable Filter Media

F436/F436M-16 Standard Specification for Hardened Steel Washers Inch and Metric Dimensions

F1200-88(2016) Standard Specification for Fabricated (Welded) Pipe Line Strainers (Above 150 psig and 150°F)

F1201-88(2016) Standard Specification for Fluid Conditioner Fittings in Piping Applications Above 0°F

F1386-92(2016)e1 Standard Guide for Construction of Sounding Tube and Striker Plate for Tank Sounding

F1431-92(2016) Standard Specification for Water Trap for Diesel Exhaust

F1508-96(2016)e1 Standard Specification for Angle Style, Pressure Relief Valves for Steam, Gas, and Liquid Services

F1792-97(2016)e1 Standard Specification for Special Requirements for Valves Used in Gaseous Oxygen Service

F1793-97(2016)e1 Standard Specification for Automatic Shut-Off Valves (Also Known as Excess Flow Valves, EFV) for Air or Nitrogen Service

F1794-97(2016)e1 Standard Specification for Hand-Operated, Globe-Style Valves for Gas (Except Oxygen Gas) and Hydraulic Systems

C1797-16e1 Standard Specification for Ground Calcium Carbonate and Aggregate Mineral Fillers for use in Hydraulic Cement Concrete

D5084-16a Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter

F1473-16 Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins

A897/A897M-16 Standard Specification for Austempered Ductile Iron Castings

C39/C39M-16b Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens

C94/C94M-16a Standard Specification for Ready-Mixed Concrete

C138/C138M-16a Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete

C939/C939M-16a Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)

C1797M-16 Standard Specification for Ground Calcium Carbonate and Aggregate Mineral Fillers for use in Hydraulic Cement Concrete

D2290-16 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe

D3911-16 Standard Test Method for Evaluating Coatings Used in Light-Water Nuclear Power Plants at Simulated Design Basis Accident (DBA) Conditions

D5084-16 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter

D5144-08(2016) Standard Guide for Use of Protective Coating Standards in Nuclear Power Plants

E50-11(2016) Standard Practices for Apparatus, Reagents, and Safety Considerations for Chemical Analysis of Metals, Ores, and Related Materials

E60-11(2016) Standard Practice for Analysis of Metals, Ores, and Related Materials by Spectrophotometry

E1447-09(2016) Standard Test Method for Determination of Hydrogen in Titanium and Titanium Alloys by Inert Gas Fusion Thermal Conductivity/Infrared Detection Method

F3203-16 Standard Test Method for Determination of Gel Content of Crosslinked Polyethylene (PEX) Pipes and Tubing

D6725/D6725M-16 Standard Practice for Direct Push Installation of Prepacked Screen Monitoring Wells in Unconsolidated Aquifers

D7262-10(2016)e1 Standard Test Method for Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids

D7677-16 Standard Test Method for the Continuous Measurement of Dissolved Ozone in Low Conductivity Water

F3020-16 Performance Standard for Hand-Worn Metal Detectors Used in Safety and Security

C39/C39M-16a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens

C78/C78M-16 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)

C260/C260M-10a(2016) Standard Specification for Air-Entraining Admixtures for Concrete

C494/C494M-16 Standard Specification for Chemical Admixtures for Concrete

C869/C869M-11(2016) Standard Specification for Foaming Agents Used in Making Preformed Foam for Cellular Concrete

C1553-16 Standard Guide for Drying Behavior of Spent Nuclear Fuel

D1318-16 Standard Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method)

D1552-16 Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conducitivity Detection (TCD)

D1552-16e1 Standard Test Method for Sulfur in Petroleum Products by High Temperature Combustion and Infrared (IR) Detection or Thermal Conductivity Detection (TCD)

D2166/D2166M-16 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil

D2973-16 Standard Test Method for Total Nitrogen in Peat Materials

D3341-16 Standard Test Method for Lead in Gasoline—Iodine Monochloride Method

D3441-16 Standard Test Method for Mechanical Cone Penetration Testing of Soils

D3605-16 Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy

D4633-16 Standard Test Method for Energy Measurement for Dynamic Penetrometers

D4737-10(2016) Standard Test Method for Calculated Cetane Index by Four Variable Equation

D5064-16 Standard Practice for Conducting a Patch Test to Assess Coating Compatibility

D5126/D5126M-16 Standard Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in Vadose Zone

D5126-16e1 Standard Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in Vadose Zone

D5978/D5978M-16 Standard Guide for Maintenance and Rehabilitation of Groundwater Monitoring Wells

D6033-16 Standard Guide for Describing the Functionality of a Groundwater Modeling Code

D6304-16 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration

D6304-16e1 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration

D6595-16 Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry

D6724/D6724M-16 Standard Guide for Installation of Direct Push Groundwater Monitoring Wells

D6974-16 Standard Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels—Filtration and Culture Procedures

D7321-16a Standard Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration

D7393-16 Standard Practice for Indicating Oil in Abrasives

D7923-16 Standard Test Method for Water in Ethanol and Hydrocarbon Blends by Karl Fischer Titration

D8045-16 Standard Test Method for Acid Number of Crude Oils and Petroleum Products by Catalytic Thermometric Titration

D8045-16e1 Standard Test Method for Acid Number of Crude Oils and Petroleum Products by Catalytic Thermometric Titration

D8056-16 Standard Guide for Elemental Analysis of Crude Oil

E84-16 Standard Test Method for Surface Burning Characteristics of Building Materials

E119-16a Standard Test Methods for Fire Tests of Building Construction and Materials

E482-16 Standard Guide for Application of Neutron Transport Methods for Reactor Vessel Surveillance

E1760-16 Standard Guide for Unrestricted Disposition of Bulk Materials Containing Residual Amounts of Radioactivity

E2599-16 Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics

E2688-16 Standard Practice for Specimen Preparation and Mounting of Tapes to Assess Surface Burning Characteristics

C535-16 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine

D513-16 Standard Test Methods for Total and Dissolved Carbon Dioxide in Water

D859-16 Standard Test Method for Silica in Water

D1067-16 Standard Test Methods for Acidity or Alkalinity of Water

D1179-16 Standard Test Methods for Fluoride Ion in Water

D1246-16 Standard Test Method for Bromide Ion in Water

D6386-16a Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting

A820/A820M-16 Standard Specification for Steel Fibers for Fiber-Reinforced Concrete

A960/A960M-16 Standard Specification for Common Requirements for Wrought Steel Piping Fittings

A961/A961M-16 Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications

B167-11(2016) Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Seamless Pipe and Tube

B168-11(2016) Standard Specification for Nickel-Chromium-Iron Alloys (UNS N06600, N06601, N06603, N06690, N06693, N06025, N06045, and N06696), Nickel-Chromium-Cobalt-Molybdenum Alloy (UNS N06617), and Nickel-Iron-Chromium-Tungsten Alloy (UNS N06674) Plate, Sheet, and Strip

B408-06(2016) Standard Specification for Nickel-Iron-Chromium Alloy Rod and Bar

B409-06(2016) Standard Specification for Nickel-Iron-Chromium Alloy Plate, Sheet, and Strip

B423-11(2016) Standard Specification for Nickel-Iron-Chromium-Molybdenum-Copper Alloy (UNS N08825, N08221, and N06845) Seamless Pipe and Tube

B424-11(2016) Standard Specification for Ni-Fe-Cr-Mo-Cu Alloy (UNS N08825, UNS N08221, and UNS N06845) Plate, Sheet, and Strip

B434-06(2016) Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, UNS N10242) Plate, Sheet, and Strip

B435-06(2016) Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Plate, Sheet, and Strip

B444-16 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube

B444-16e1 Standard Specification for Nickel-Chromium-Molybdenum-Columbium Alloys (UNS N06625 and UNS N06852) and Nickel-Chromium-Molybdenum-Silicon Alloy (UNS N06219) Pipe and Tube

B463-10(2016) Standard Specification for UNS N08020 Alloy Plate, Sheet, and Strip

B468-10(2016) Standard Specification for Welded UNS N08020 Alloy Tubes

B572-06(2016) Standard Specification for UNS N06002, UNS N06230, UNS N12160, and UNS R30556 Rod

B573-06(2016) Standard Specification for Nickel-Molybdenum-Chromium-Iron Alloys (UNS N10003, N10242) Rod

B621-02(2016) Standard Specification for Nickel-Iron-Chromium-Molybdenum Alloy (UNS N08320) Rod

B649-06(2016) Standard Specification for Ni-Fe-Cr-Mo-Cu-N Low-Carbon Alloys (UNS N08925, UNS N08031, UNS N08354, and UNS N08926), and Cr-Ni-Fe-N Low-Carbon Alloy (UNS R20033) Bar and Wire, and Ni-Cr-Fe-Mo-N Alloy (UNS N08936) Wire

B673-05(2016) Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Pipe

B674-05(2016) Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Welded Tube

B677-05(2016) Standard Specification for UNS N08925, UNS N08354, and UNS N08926 Seamless Pipe and Tube

B718-00(2016) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Plate, Sheet, and Strip

B722-06(2016) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Seamless Pipe and Tube

B726-02(2016) Standard Specification for Nickel-Chromium-Molybdenum-Cobalt-Tungsten-Iron-Silicon Alloy (UNS N06333) Welded Tube

B755-00(2016) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Plate, Sheet, and Strip

B756-00(2016) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloy(UNS N06110) Rod and Bar

B757-00(2016) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten-Alloys (UNS N06110) Welded Pipe

B758-00(2016) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Welded Tube

B759-00(2016) Standard Specification for Nickel-Chromium-Molybdenum-Tungsten Alloys (UNS N06110) Pipe and Tube

B814-06(2016) Standard Specification for Nickel-Chromium-Iron-Molybdenum-Tungsten Alloy(UNS N06920) Plate, Sheet, and Strip

B815-02(2016) Standard Specification for Cobalt-Chromium-Nickel-Molybdenum-Tungsten Alloy (UNS R31233) Rod

B828-16 Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings

B872-06(2016) Standard Specification for Precipitation-Hardening Nickel Alloys Plate, Sheet, and Strip

C174/C174M-16 Standard Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores

C192/C192M-16a Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory

C697-16 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Plutonium Dioxide Powders and Pellets

C698-16 Standard Test Methods for Chemical, Mass Spectrometric, and Spectrochemical Analysis of Nuclear-Grade Mixed Oxides ((U, Pu)O2)

C1343-16 Standard Test Method for Determination of Low Concentrations of Uranium in Oils and Organic Liquids by X-ray Fluorescence

C1542/C1542M-16a Standard Test Method for Measuring Length of Concrete Cores

C1561-10(2016) Standard Guide for Determination of Plutonium and Neptunium in Uranium Hexafluoride and U-Rich Matrix by Alpha Spectrometry

C1842-16 Standard Test Method for The Analysis of Boron and Silicon in Uranium Hexfluoride via Fourier-Transform Infrared (FTIR) Spectroscopy

C1845-16 Standard Practice for The Separation of Lanthanide Elements from Uranium Matrices Using High Pressure Ion Chromatography (HPIC) for Isotopic Analyses by Inductively Coupled Plasma Mass Spectrometry (ICP-MS)

D516-16 Standard Test Method for Sulfate Ion in Water

D808-16 Standard Test Method for Chlorine in New and Used Petroleum Products (High Pressure Decomposition Device Method)

D1796-11(2016) Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)

D1971-16 Standard Practices for Digestion of Water Samples for Determination of Metals by Flame Atomic Absorption, Graphite Furnace Atomic Absorption, Plasma Emission Spectroscopy, or Plasma Mass Spectrometry

D2859-16 Standard Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials

D2862-16 Standard Test Method for Particle Size Distribution of Granular Activated Carbon

D3561-16 Standard Test Method for Lithium, Potassium, and Sodium Ions in Brackish Water, Seawater, and Brines by Atomic Absorption Spectrophotometry

D3651-16 Standard Test Method for Barium in Brackish Water, Seawater, and Brines

D3802-16 Standard Test Method for Ball-Pan Hardness of Activated Carbon

D3867-16 Standard Test Methods for Nitrite-Nitrate in Water

D4006-16 Standard Test Method for Water in Crude Oil by Distillation

D4006-16e1 Standard Test Method for Water in Crude Oil by Distillation

D4007-11(2016) Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)

D4007-11(2016)e1 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)

D4519-16 Standard Test Method for On-Line Determination of Anions and Carbon Dioxide in High Purity Water by Cation Exchange and Degassed Cation Conductivity

D4638-16 Standard Guide for Preparation of Biological Samples for Inorganic Chemical Analysis

D5228-16 Standard Test Method for Determination of Butane Working Capacity of Activated Carbon

D5464-16 Standard Test Method for pH Measurement of Water of Low Conductivity

D5542-16 Standard Test Methods for Trace Anions in High Purity Water by Ion Chromatography

D5544-16 Standard Test Method for On-Line Measurement of Residue After Evaporation of High-Purity Water

D5622-16 Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis

D5742-16 Standard Test Method for Determination of Butane Activity of Activated Carbon

D6728-16 Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry

D7036-16 Standard Practice for Competence of Air Emission Testing Bodies

D7321-16 Standard Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration

D7463-16 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water

D7463-16e1 Standard Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures, and Fuel Associated Water

D7548-16 Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products

D7691-16 Standard Test Method for Multielement Analysis of Crude Oils Using Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

D8049-16 Standard Test Method for Determining Concentration, Count, and Size Distribution of Solid Particles and Water in Light and Middle Distillate Fuels by Direct Imaging Particle Analyzer

E23-16b Standard Test Methods for Notched Bar Impact Testing of Metallic Materials

E178-16 Standard Practice for Dealing With Outlying Observations

E1172-16 Standard Practice for Describing and Specifying a Wavelength Dispersive X-Ray Spectrometer

E1282-11(2016) Standard Guide for Specifying the Chemical Compositions and Selecting Sampling Practices and Quantitative Analysis Methods for Metals, Ores, and Related Materials

E2006-16 Standard Guide for Benchmark Testing of Light Water Reactor Calculations

E2450-16 Standard Practice for Application of CaF2(Mn) Thermoluminescence Dosimeters in Mixed Neutron-Photon Environments

F526-16 Standard Test Method for Using Calorimeters for Total Dose Measurements in Pulsed Linear Accelerator or Flash X-ray Machines

A747/A747M-16a Standard Specification for Steel Castings, Stainless, Precipitation Hardening

A775/A775M-16 Standard Specification for Epoxy-Coated Steel Reinforcing Bars

E1921-16 Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range

A6/A6M-16 Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling

A67-00(2016) Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon-Hot-Worked

A182/A182M-16 Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service

A194/A194M-16 Standard Specification for Carbon Steel, Alloy Steel, and Stainless Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both

A240/A240M-16 Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications

A249/A249M-16 Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes

A276/A276M-16a Standard Specification for Stainless Steel Bars and Shapes

A290/A290M-16 Standard Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears

A291/A291M-16 Standard Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears

A351/A351M-16 Standard Specification for Castings, Austenitic, for Pressure-Containing Parts

A370-16 Standard Test Methods and Definitions for Mechanical Testing of Steel Products

A388/A388M-16 Standard Practice for Ultrasonic Examination of Steel Forgings

A403/A403M-16 Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings

A420/A420M-16 Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service

A453/A453M-16 Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels

A473-16 Standard Specification for Stainless Steel Forgings

A479/A479M-16a Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels

A508/A508M-16 Standard Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels

A511/A511M-16 Standard Specification for Seamless Stainless Steel Mechanical Tubing and Hollow Bar

A533/A533M-16 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel

A550-16 Standard Specification for Ferrocolumbium (Ferroniobium)

A668/A668M-16 Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use

A671/A671M-16 Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures

A694/A694M-16 Standard Specification for Carbon and Alloy Steel Forgings for Pipe Flanges, Fittings, Valves, and Parts for High-Pressure Transmission Service

A709/A709M-16a Standard Specification for Structural Steel for Bridges

A759-10(2016) Standard Specification for Carbon Steel Crane Rails

A778/A778M-16 Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products

A891/A891M-16 Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels

A962/A962M-16a Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range

A988/A988M-16 Standard Specification for Hot Isostatically-Pressed Stainless Steel Flanges, Fittings, Valves, and Parts for High Temperature Service

A1014/A1014M-16 Standard Specification for Precipitation-Hardening Bolting (UNS N07718) for High Temperature Service

A1022/A1022M-16a Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement

A1060/A1060M-16a Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete

A1064/A1064M-16a Standard Specification for Carbon-Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete

A1082/A1082M-16 Standard Specification for High Strength Precipitation Hardening and Duplex Stainless Steel Bolting for Special Purpose Applications

A1091/A1091M-16 Standard Specification for Steel Castings, Creep-Strength Enhanced Ferritic Alloy, for Pressure-Containing Parts, Suitable for High Temperature Service

A1091/A1091M-16e1 Standard Specification for Steel Castings, Creep-Strength Enhanced Ferritic Alloy, for Pressure-Containing Parts, Suitable for High Temperature Service

B366/B366M-16 Standard Specification for Factory-Made Wrought Nickel and Nickel Alloy Fittings

B511/B511M-16 Standard Specification for Nickel-Iron-Chromium-Silicon Alloy Bars and Shapes

B647-10(2016) Standard Test Method for Indentation Hardness of Aluminum Alloys by Means of a Webster Hardness Gage

B775/B775M-16 Standard Specification for General Requirements for Nickel and Nickel Alloy Welded Pipe

B813-16 Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube

B898-11(2016) Standard Specification for Reactive and Refractory Metal Clad Plate

D1073-16 Standard Specification for Fine Aggregate for Asphalt Paving Mixtures

D1874-16 Standard Specification for Water- or Solvent-Soluble Liquid Adhesives for Automatic Machine Sealing of Top Flaps of Fiberboard Shipping Cases

D4611-16 Standard Test Method for Specific Heat of Rock and Soil

D4612-16 Standard Test Method for Calculating Thermal Diffusivity of Rock and Soil

D6386-16 Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting

D7928-16 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis

D7928-16e1 Standard Test Method for Particle-Size Distribution (Gradation) of Fine-Grained Soils Using the Sedimentation (Hydrometer) Analysis

E3039-16 Standard Test Method for Determination of Crack-Tip-Opening Angle of Pipe Steels Using DWTT Specimens

F3183-16 Standard Practice for Guided Side Bend Evaluation of Polyethylene Pipe Butt Fusion Joint