The Second ASTM D22 Symposium on Silica and Associated Respirable Mineral Particles will be held on October 25-26, 2012. Sponsored by ASTM Committee D22 on Air Quality, the symposium will be held at the Hyatt Regency Atlanta in Atlanta, GA, in conjunction with the October standards development meetings of the committee.
Crystalline silica is present in most rocks and soils and many construction materials. Chronic and acute respiratory disease associated with occupational exposure to airborne Respirable Crystalline Silica, (RCS) has been observed through history and, currently, there is no effective treatment. Therefore, it is essential to understand working environments where silica dust is present and to take all necessary precautions for workers health. An estimated 1.7 million workers (2002) are exposed in various industries and more than one third of those with silicosis were employed in mining and construction. US Occupational Safety and Health Administration (OSHA) and Mine Safety and Health Administration (MSHA) enforcement data indicate that some workers are exposed to levels of RCS in excess of current (1970's) exposure limits. In 1997, crystalline silica was classified as a "Group One" human carcinogen by the International Agency for Research on Cancer. In 2002, the UK Health & Safety Executive described a risk of 0.5% (1 in 200 workers) of developing silicosis after 15 years of exposure to RCS at 0.04 mg/m3, with the risk increasing to 2.5% at 0.1 mg/m3. A threshold limit value (TLV) for RCS of 0.025 mg/m3 was accepted by American Conference of Governmental Industrial Hygienists (ACGIH) in 2006. Other organizations, nationally and internationally, including OSHA and MSHA, are re-evaluating guidance or regulations on RCS.
Air samples are collected on filters through cyclone pre-selectors for the respirable fraction which are limited to sampling around a one cubic-meter air volume for an 8-hour work-shift. Current analytical methods include infrared absorption spectrometry and x-ray powder diffraction. Both analytical methods have been evaluated through the Proficiency Analytical Testing conducted by the American Industrial Hygiene Association. Samples containing at least 0.04 mg of RCS had a relative standard deviation for interlaboratory variability above 20% and a relationship with loading which predicted unacceptable variation at the lower levels which would be collected around the new ACGIH TLV.
Improving and standardizing analytical methodologies across laboratories and developing samplers that provide additional RCS mass for analysis is required to address this situation. Combining these two approaches will allow accurate evaluate of workplace concentrations of RCS and has the potential to allow shorter-term task-based sampling for better understanding of the determinants of exposure. This Symposium builds on the first ASTM Silica Symposium (2004, Salt Lake City) and provides an update on progress towards accurately assessing RCS exposures for compliance with current limit values. It will be valuable to regulators and bodies which set guidance for exposures, managers and technicians of laboratories engaged in analysis, hygienists and others collecting samples risk assessors and managers engaged in determining and managing the risks of products or processes that may result in emissions, and representatives of workers exposed to these products and processes.
The language of the symposium will be English.
Online registration is currently open and will close October 17, 2012. The fees to attend this symposium are listed below.
Students – A student's fee is waived, provided that he/she is a full-time student and is not employed full time. After registering online, the student must check in at the ASTM Registration Desk on site and present his/her student ID.
All attendees, including presenters and ASTM members, are urged to register online for this event so that space requirements can be accommodated. If you do not register online by the closing date, then you must register upon arrival at the symposium. All attendees must check in at the ASTM registration desk upon arrival at symposium.
A refund of the symposium fee will be honored only if requested at least 7 business days prior to the symposium. To cancel your registration and request a refund, please contact Hannah Sparks at email@example.com or 610-832-9678.
If you have questions concerning online registration, please contact Hannah Sparks in Symposia Operations at firstname.lastname@example.org, Tel: -610/832-9677 or ASTM Technical Support at email@example.com or 1-800-262-1373 (domestic) or 610-832-9578 (international).
ASTM Member Fee
Symposium attendees interested in receiving 1.05 Continuing Education Units (CEUs) should complete a CEU application form at the adjournment of the symposium, and then submit it to the ASTM staff member on site. A certificate will be sent to the attendee approximately 4 to 6 weeks after the symposium.
Additional information about the symposium is available from Symposium Co-Chairmen Dr. Martin Harper, National Institute for Occupational Safety and Health, Morgantown, WV, USA, Email: firstname.lastname@example.org, tel: 304-285-5823 and Dr. Taekhee Lee, Ph.D, National Institute for Occupational Safety and Health, Morgantown, WV, Email: email@example.com, tel: 304-285-5783.
OVERFLOW - A block of rooms are available at the Marriott Atlanta Downtown, single/double occupancy is $149.00. You are requested to call the hotel at 866-316-5959 for reservations before October 4, 2012. The Marriott is located .3 miles from the Hyatt Regency (Approximately a 7 minute walk).
All meetings will be held at the Hyatt Regency Atlanta, 265 Peachtree St., NE, Atlanta, GA 30303. Reservations can be made by telephoning the hotel at 800-233-1234. To make your hotel reservation online, visit Reservation for Hyatt Regency Atlanta . Select your dates and proceed as instructed. If you need assistance with your hotel reservation call the hotel directly at 404-577-1234.
Group rate will be honored until the ASTM block is full but no later than September 19, 2012. ASTM rates are $149 single/double plus 16% tax (you must mention ASTM in order to receive a group rate). You may be charged a higher rate if reservations are received after the cut-off date, or when the block is full.
U.S. GOVERNMENT RATES: The Hyatt Regency Atlanta has a limited number of rooms at the Government per diem rate of $133.
IMPORTANT! ASTM Rates are non-commissionable. If you book your reservation through a travel agent they must ask for a non-commissioned ASTM Group Rate. ASTM cannot adjust your higher rate if commissions were paid to a travel agency.
ADVANCE DEPOSIT: The Hyatt Regency Atlanta requires a credit card to guarantee your reservation.
CONFIRMATION NOTICES: The Hyatt Regency Atlanta Reservation Center sends confirmations by email.
CANCELLATION/CHANGE POLICY: At the Hyatt Regency Atlanta, notice of cancellation must be received by 3:00pm, 24 hours prior to arrival date.
Check the ASTM website for updates on overflow hotel room availability
The hotel is located approximately 10 miles/20 minutes from the Hartsfield International Airport. The hotel's phone number is 404-577-1234 and the general fax number is 404-588-4137. The web site for the hotel is Hyatt Regency Atlanta Information.
For information on the city of Atlanta visit the Atlanta Convention Visitors Bureau Website at: Atlanta Convention and Visitors Bureau.
AIRPORT SHUTTLE SERVICE: Link Airport Shuttle Service is available at the ground transportation terminal. The cost is $16.50 one way and $29 round trip. Taxis cost approximately $35.
MARTA (Metropolitan Atlanta Rapid Transit Authority) - From inside Hartsfield International Airport, MARTA runs Monday thru Friday from 5:00am thru 1:00am every 20 minutes and on weekends and holidays from 5:00am thru 12:30am every 25 minutes. The cost for MARTA is $2.50 one way.
PARKING: Valet parking is available at $32 per day with in and out privileges.
Members have the option to determine their dress at ASTM meetings. Business casual attire is acceptable at this meeting and appropriate for Atlanta. The average temperatures in October range from a high of 73 degrees to a low of 51 degrees.
Meeting schedules of Committee DESIGNATION are posted on the ASTM web site at www.astm.org/COMMIT/COMMITTEE/D22.htm or contact the ASTM staff manager, Dave Bradley at firstname.lastname@example.org or tel: 610- 832-9681.
Committee D22 invites you to attend their future standards development meetings. There is no fee to attend these meetings, and membership in ASTM International is not required. For more information, visit the web listed immediately above, and click "Future Meetings".