Journal Published Online: 02 March 2020
Volume 9, Issue 2

Mechanism of Variation in High-Temperature Grain Stability of Aluminum in Dissimilar Friction Stir Welds

CODEN: MPCACD

Abstract

In the dissimilar Friction Stir Welding (FSW) of aluminum to titanium, a large fraction of titanium particles is inhomogeneously distributed in the weld nugget and their distribution is highly complex. Such a distribution can have an immense influence on the grain stability of the weld nugget, which decides its mechanical properties at the high temperatures experienced in critical applications. The present investigation highlights the variation in grain structure at the top surface and center of the weld nugget. The results show that the microstructure at the surface of the weld contains a higher fraction of fine titanium particles, refined grains of aluminum and high-angle grain boundaries, and a lower intensity of shear texture components when compared to the center of the weld nugget. The variation in the grain stability of the weld was correlated with the qualitative variation in the strain rate and temperature in the weld. It is proposed that the formation and distribution of a high fraction of fine titanium particles results in superior grain stability of aluminum at the surface of the weld due to arrest of the grain boundary mobility against grain growth. This mechanism and methodology can be applied in developing metal matrix composites with superior mechanical properties as well.

Author Information

Kar, Amlan
Department of Mechanical Engineering, Indian Institute of Technology (Indian School of Mines), Dhanbad, Jharkhand, India
Kailas, Satish V.
Department of Mechanical Engineering, Indian Institute of Science, Bengaluru, Karnataka, India
Suwas, Satyam
Department of Materials Engineering, Indian Institute of Science, Bengaluru, Karnataka, India
Pages: 10
Price: $25.00
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Stock #: MPC20190011
ISSN: 2379-1365
DOI: 10.1520/MPC20190011