Journal Published Online: 11 February 2016
Volume 5, Issue 1

Influence of Boronizing Treatment on Fe–Mn–Al–Si–C Steel



Austenitic Fe–Mn–Al–Si–C steel provides excellent cold formability and lower density compared to conventional stainless steels. These steels owe their corrosion and oxidation resistance to their aluminum and silicon contents, and the stability of their gamma phase is due to manganese and carbon alloying elements. The production of a boride layer with high hardness can significantly increase its surface hardness and consequently its wear resistance. In this work, Fe–31Mn–7.5Al–1.3Si–0.9C steel samples were subjected to a boriding treatment for 4 h at 900°C. The composition of the bath was 90 % borax and 10 % aluminum. Boride layers with high hardness levels were obtained (1900 HV). There was also a marked increase in wear resistance of the material.

Author Information

Casteletti, L.
EESC, Universidade de São Paulo, São Paulo, BR
Takeya, G.
EESC, Universidade de São Paulo, São Paulo, BR
Neto, A.
UTFPR-LD, Londrina, PR, BR
Picon, C.
EEIS-UNESP, Ilha Solteira, SP, BR
Totten, G.
Portland State Univ., Portland, OR, US
Pages: 7
Price: $25.00
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Stock #: MPC20150036
ISSN: 2165-3992
DOI: 10.1520/MPC20150036