Journal Published Online: 16 June 2021
Volume 50, Issue 1

Impact of Beater Shape in Mixing Test to Determine Clogging Potential

CODEN: JTEVAB

Abstract

Clogging is a common phenomenon in tunnel boring machine (TBM) excavations, and cutterhead shape can influence clogging potential. In this research, a mixing test with a newly proposed index has been introduced to assess clogging potential. Five mixtures—composed of different percentages of bentonite and kaolin—were employed to simulate soil conditions. For each mixture, samples with five different water contents (ranging between the plastic and liquid limits) were employed in the mixing test. Three different beater shapes were used to investigate the effect of beater shape on mixing test results. The ratio (A′/A) between the open area of the beater (A′) and the entire surface area of the beater with no opening (A) was introduced to quantify the difference in beater shape. The Hobart mixer used in the research is 18.9 liter (20-qt). Two indexes were used to analyze mixing test results: the weight of soil stuck to the beater per unit area (W/Ac) and the weight of soil stuck to the beater (GB). The results indicate that both W/Ac and GB increase with increasing bentonite content in the mixture. However, there are no clear trends that can be observed in GB for different beater shapes. The variation of maximum GB is within 0.5 kg when A′/A increases from 0.52 to 0.7 for the 5 clay mixtures, showing a difference of 12 %. It is concluded that W/Ac increases dramatically with an increase in the open area of the beater, whereas GB only varies slightly. Undoubtedly, the shape of beater used cannot be ignored for tests to assess clogging potential. Furthermore, W/Ac is a good indicator to detect the impacts of beater shape on mixing test results.

Author Information

Zhou, Yang
Department of Civil and Environmental Engineering, University of Alberta, Edmonton, AB, Canada
Kang, Chao
School of Engineering, University of Northern British Columbia, Prince George, BC, Canada
Bayat, Alireza
Department of Civil and Environmental Engineering, University of Alberta, Edmonton, AB, Canada
Pages: 16
Price: $25.00
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Stock #: JTE20200599
ISSN: 0090-3973
DOI: 10.1520/JTE20200599