Journal Published Online: 01 January 1981
Volume 9, Issue 1

Chevron V-Notched Bend Specimen for Measurement of Brittle Materials

CODEN: JTEVAB

Abstract

A chevron V-notched bend specimen is proposed for plane-strain fracture toughness KIc testing of brittle materials. This specimen has the following distinctive advantages over more conventional toughness specimens: (1) the simple geometry can easily be machined, (2) no fatigue precracking is required, (3) no crack length measurements are required (KIc can be calculated from knowledge of the peak load alone), and (4) the test can easily be conducted at elevated temperatures. The proposed specimen was calibrated with a 7079-T6 aluminum alloy of known fracture toughness. Subsequently, the fracture toughness of the ceramic material Pyroceram® 9606 was determined with the same specimen design. The reproducibility of KIc values was found to be excellent: 2.64 MPa·m1/2 ± 3% (2.39 ksi·in.1/2 ± 3%). The proposed specimen design is also recommended as an inexpensive toughness screening test for other structural materials. The chevron V-notch crack starter used in the bend bar specimen is also recommended for use in other specimen designs to improve the capability for both fatigue and stress corrosion threshold testing. In view of the tremendous cost- and time-saving potential associated with the chevron V-notch design, it is recommended that a detailed finite element analysis be performed on this configuration to further substantiate the applied stress and stress intensity conditions.

Author Information

Shih, TT
Westinghouse R & D Center, Pittsburgh, Pa.
Pages: 6
Price: $25.00
Related
Reprints and Permissions
Reprints and copyright permissions can be requested through the
Copyright Clearance Center
Details
Stock #: JTE10647J
ISSN: 0090-3973
DOI: 10.1520/JTE10647J