< Back to Issues
2014 Volume 3, Issue 4 (December 2014)
Cooling Curve Analysis of Heat Treating Oils and Correlation With Hardness and Microstructure of a Low Carbon Steel
S. Elmi Hosseini, A. Zabett, Zhuguo Li
Page Count: 23
Published Online: 26 September 2014
DOI: 10.1520/MPC20130067
Format: PDF
Price: $25.00
Distortion Control: Quenching Apparatus for Hardening Parts: An Overview
Xinmin Luo, George Totten
Page Count: 28
Published Online: 30 May 2014
DOI: 10.1520/MPC20130086
Format: PDF
Price: $25.00
Flow Optimization of Gas Quenching Processes Using Perforated Plates
Thibaud Bucquet, Udo Fritsching
Page Count: 14
Published Online: 12 August 2014
DOI: 10.1520/MPC20130099
Format: PDF
Price: $25.00
Batch Intensive Quenching Processes for Minimizing Steel Part Distortion and Improving Part Performance Characteristics
N. Kobasko, M. Aronov, SH. Guseynov, J. Rimshans
Page Count: 23
Published Online: 18 June 2014
DOI: 10.1520/MPC20130096
Format: PDF
Price: $25.00
Investigations of Nucleate Boiling Processes During Quenching Based on Possibilities of Noise Control System
N. Kobasko, A. Moskalenko, L. Deyneko
Page Count: 11
Published Online: 13 May 2014
DOI: 10.1520/MPC20130095
Format: PDF
Price: $25.00
Development of a New Method for Testing Cooling Power Using a Silver Probe and a New Reference Quenching Fluid
Hideo Yokota
Page Count: 10
Published Online: 12 August 2014
DOI: 10.1520/MPC20130093
Format: PDF
Price: $25.00
Large Forgings: Microstructural Evolution and Residual Stresses Due to Quenching Treatments—A Combined Numerical and Experimental Approach
Marco Boniardi, Mario Guagliano, Andrea Casaroli, Riccardo Andreotti, Filippo Ballerini
Page Count: 19
Published Online: 11 September 2014
DOI: 10.1520/MPC20130089
Format: PDF
Price: $25.00
Induction Hardening—Establishing the Process Window for Induction Quenching by Using Experimental Results and Computational Tools
Albin Stormvinter, Hans Kristoffersen, Eva Troell
Page Count: 17
Published Online: 09 May 2014
DOI: 10.1520/MPC20130108
Format: PDF
Price: $25.00
Cooling Characteristics of Meso- and Nanofluids Prepared by the DPIE Method
A. Dolinsky, L. Grabov, A. Moskalenko, T. Grabova, P. Logvinenko
Page Count: 15
Published Online: 26 August 2014
DOI: 10.1520/MPC20130106
Format: PDF
Price: $25.00
Influence of Additive Chemistry on the Physical, Chemical, and Cooling Properties of Quenching Oils
Božidar Matijević, Ljiljana Pedišić
Page Count: 10
Published Online: 11 September 2014
DOI: 10.1520/MPC20130105
Format: PDF
Price: $25.00
Modeling and Simulation of Carbide Precipitation During Tempering of Alloy Tool Steel
Xiao-Hu Deng, Dong-Ying Ju
Page Count: 14
Published Online: 11 September 2014
DOI: 10.1520/MPC20130104
Format: PDF
Price: $25.00
Investigation and Development of Spray Cooling Device for Heat Treatment of Large Steel Forgings
M. Maisuradze, Yu. Yudin, M. Ryzhkov
Page Count: 15
Published Online: 12 August 2014
DOI: 10.1520/MPC20130103
Format: PDF
Price: $25.00
Current Investigations at Quenching Research Centre
Božidar Liščić, Tomislav Filetin, Darko Landek, Josip Župan
Page Count: 17
Published Online: 08 May 2014
DOI: 10.1520/MPC20130102
Format: PDF
Price: $25.00
A Comparative Assessment of the Hardness of Nano-Structured Bainitic Steel Affected by Using Various Quenchants
Ashwin Polishetty, Chinmay Sonavane, Guy Littlefair
Page Count: 8
Published Online: 12 August 2014
DOI: 10.1520/MPC20130101
Format: PDF
Price: $25.00
Nucleate Boiling Heat Transfer: Temperature Pulsations or Local Thermal Shocks
Irakli Shekriladze
Page Count: 18
Published Online: 11 September 2014
DOI: 10.1520/MPC20130114
Format: PDF
Price: $25.00
First Prototype of Rotary-Arm Type Test System Using a Small Ball Probe for Determination of Cooling Characteristics of Quenchants
Kyozo Arimoto, Fumiaki Ikuta, Hideo Yokota
Page Count: 22
Published Online: 12 September 2014
DOI: 10.1520/MPC20130113
Format: PDF
Price: $25.00
Determination of Heat Transfer Coefficients in High Speed Quenching Processes
F. Frerichs, S. Sander, T. Lübben, S. Schüttenberg, U. Fritsching
Page Count: 22
Published Online: 03 June 2014
DOI: 10.1520/MPC20130112
Format: PDF
Price: $25.00
Influence of External Factors on the Cooling Ability of Vacuum Quenching Oils
Danail Gospodinov, Maria Nikolova, Plamen Danev
Page Count: 13
Published Online: 02 June 2014
DOI: 10.1520/MPC20130110
Format: PDF
Price: $25.00
A Prediction of Quenching Parameters Using Inverse Analysis
Darko Landek, Josip Župan, Tomislav Filetin
Page Count: 13
Published Online: 09 May 2014
DOI: 10.1520/MPC20130109
Format: PDF
Price: $25.00
Molecular Dynamics Simulation of Heat Transfer during Quenching in CNT Nanofluids
Weimin Gao, Lingxue Kong, Peter Hodgson
Page Count: 19
Published Online: 11 September 2014
DOI: 10.1520/MPC20130107
Format: PDF
Price: $25.00
“Reference QuenchProbe”—An Alternative Probe Design for In-Situ Estimation of Cooling Rates, Heat Flux, and Hardenability During Immersion Quenching of Hardenable Steels
T. Prasanna Kumar, B. Hernandez-Morales, G. Totten
Page Count: 25
Published Online: 12 September 2014
DOI: 10.1520/MPC20140003
Format: PDF
Price: $25.00
A Dimensional Parameter for Prediction of Cooling Performance of Quenchants
K. Prabhu, G. Ramesh
Page Count: 14
Published Online: 09 May 2014
DOI: 10.1520/MPC20140002
Format: PDF
Price: $25.00
Overview on Super Strengthening Phenomenon Taking Place During Intensive Quenching of Steels
N. Kobasko, M. Aronov
Page Count: 14
Published Online: 03 June 2014
DOI: 10.1520/MPC20130115
Format: PDF
Price: $25.00
Partial Decarburization and Intensive Quenching to Increase Fatigue Limit of Quenched Small Parts
D. Lozano, G. Totten, G. Martinez-Cazares, R. Mercado-Solis
Page Count: 10
Published Online: 17 September 2014
DOI: 10.1520/MPC20140008
Format: PDF
Price: $25.00
Sensitivity of the Heat-Transfer Coefficient Calculation
Saša Singer
Page Count: 26
Published Online: 12 September 2014
DOI: 10.1520/MPC20140006
Format: PDF
Price: $25.00
Modeling of Dimensional Changes and Residual Stresses After Transformation-Free Cooling
Darko Landek, Dragutin Lisjak, Thomas Lübben, Josip Župan
Page Count: 20
Published Online: 18 June 2014
DOI: 10.1520/MPC20140005
Format: PDF
Price: $25.00
Vegetable Oils as Quenchants for Steels: Residual Stresses and Dimensional Changes
C. Civera, B. Rivolta, R. Simencio-Otero, J. Lúcio, G. Totten, L. Canale
Page Count: 20
Published Online: 19 September 2014
DOI: 10.1520/MPC20140039
Format: PDF
Price: $25.00
Cooling Characteristics of Water Based Nanofluids With Agitation
Josip Župan, Darko Landek, Tomislav Filetin
Page Count: 11
Published Online: 17 September 2014
DOI: 10.1520/MPC20140019
Format: PDF
Price: $25.00
High-Speed Quenching of High Carbon Steel
G. Martínez-Cázares, D. Lozano, M. Guerrero-Mata, R. Colás, G. Totten
Page Count: 12
Published Online: 19 September 2014
DOI: 10.1520/MPC20140021
Format: PDF
Price: $25.00
Cooling Performance of Select Mineral Oil and Polymer Quenchants
Vivek Tiwary, Narayan Prabhu
Page Count: 13
Published Online: 13 May 2014
DOI: 10.1520/MPC20140014
Format: PDF
Price: $25.00
Materials Performance and Characterization Individual Paper
Page Count: 6
Published Online: 31 December 2014
DOI: 10.1520/MPC03042014FM
Format: PDF
Price: Free