< Back to Issues
2020 Volume 9, Issue 1
THIS ISSUE IS COMPLETE. For citation purposes, the official publication of this journal is the online version.
Effect of Silica Sand Filler on Mechanical Properties of Epoxy Grout for Composite Repair of Steel Pipelines
S. N. A. Azraai, K. S. Lim, N. Yahaya, L. Zardasti, M. K. Abu Husain, N. Md. Noor
Page Count: 8
Published Online: 10 January 2020
DOI: 10.1520/MPC20190111
Format: PDF
Price: $25.00
Novel Insight into Tribology of Carbon Black Soot Particles in Engine Oil
Angela Maria Tortora, Gerrit Zijlstra, Deepak Halenahally Veeregowda
Page Count: 9
Published Online: 25 September 2020
DOI: 10.1520/MPC20200001
Format: PDF
Price: $25.00
Influence of Metal Transfer Modes and Postweld Heat Treatment on Tensile Properties of Gas Metal Arc–Welded AA6061-T6 Aluminum Alloy Joints
Addanki Ramaswamy, S. Malarvizhi, V. Balasubramanian
Page Count: 16
Published Online: 10 January 2020
DOI: 10.1520/MPC20190123
Format: PDF
Price: $25.00
Ultraviolet–Visible Spectroscopy: A Qualitative Tool to Predict Dispersion and Interphase Characteristics in Carbon-Based Particulate Filled Poly (Lactic Acid) Composites
Ajay Vasudeo Rane, Krishnan Kanny, Merlin Biju, Sudhikuttan Akkattil Sudhakaran, Ammu Aravind, Sabu Thomas
Page Count: 13
Published Online: 25 August 2020
DOI: 10.1520/MPC20200056
Format: PDF
Price: $25.00
Effects of Prestrain on the Nonlinear Viscoelastic Properties of a Model Sealant
D. L. Hunston, K. T. Tan, C. C. White
Page Count: 12
Published Online: 10 November 2020
DOI: 10.1520/MPC20190255
Format: PDF
Price: $25.00
Effect of Ultrasonic Cavitation and Chemical Erosion on TC4 Titanium Alloy in Aluminum Melt
Sichao Su, Ruiqing Li, Xiaoqian Li
Page Count: 11
Published Online: 29 May 2020
DOI: 10.1520/MPC20190249
Format: PDF
Price: $25.00
On the Constraint Factor Relating Uniaxial and Indentation Yield Strength of Polycrystalline Materials Using Spherical Microindentation
Anirudh Bhat, R. W. Neu
Page Count: 22
Published Online: 29 July 2020
DOI: 10.1520/MPC20190260
Format: PDF
Price: $25.00
Classification of Defect Types in SLM Ti-6Al-V4 by X-ray Refraction Topography
René Laquai, Bernd Randolf Müller, Galina Kasperovich, Guillermo Requena, Jan Haubrich, Giovanni Bruno
Page Count: 12
Published Online: 14 February 2020
DOI: 10.1520/MPC20190080
Format: PDF
Price: $25.00
Wear and Tensile Behavior of Titanium Carbide and Fly Ash–Reinforced Magnesium Matrix Composites
Avtar Singh, Niraj Bala, Baljinder Ram
Page Count: 16
Published Online: 15 July 2020
DOI: 10.1520/MPC20200019
Format: PDF
Price: $25.00
Comparative Surface Morphology of Machined Hybrid and Unhybrid Zinc-Aluminum Alloy-Based Metal Matrix Composites
Rajaneesh N. Marigoudar
Page Count: 9
Published Online: 21 January 2020
DOI: 10.1520/MPC20190144
Format: PDF
Price: $25.00
Identification of Microwave Radiation Effect on Copper Welded Joint with Brass as Filler Material Using Response Surface Methodology
Shashi Prakash Dwivedi, Satyendra Sharma, Satpal Sharma
Page Count: 10
Published Online: 16 June 2020
DOI: 10.1520/MPC20190253
Format: PDF
Price: $25.00
Optimization of Reducing Agents for Selective Bandgap Manipulation in Visible Region of Graphene Oxide and Its Work Function Estimation
Lucky Krishnia, Pawan K. Tyagi
Page Count: 25
Published Online: 10 June 2020
DOI: 10.1520/MPC20190177
Format: PDF
Price: $25.00
Carbide Faceting in Alloy 690: HRTEM Study
Sumita Santra, S. V. Ramana Rao, K. Kapoor, D. Srivastava
Page Count: 19
Published Online: 09 March 2020
DOI: 10.1520/MPC20190130
Format: PDF
Price: $25.00
A Review Paper on Wettability Properties of Titanium and Its Oxide-Based Coatings
Vandan V. Vyas, Kamlesh V. Chauhan
Page Count: 21
Published Online: 22 September 2020
DOI: 10.1520/MPC20190259
Format: PDF
Price: $25.00
Structure Property Correlation of In Situ Reinforced Al–based Metal Matrix Composite via Stir Casting
Ashish Kumar Gupta, Banshidhar Mallik, Debdas Roy
Page Count: 11
Published Online: 10 January 2020
DOI: 10.1520/MPC20190038
Format: PDF
Price: $25.00
Fatigue Behavior of Bolted Joints: Comparative Analysis for the Effect of Fretting and Stress Concentration
Xin Li, Jianwei Yang
Page Count: 15
Published Online: 21 July 2020
DOI: 10.1520/MPC20200018
Format: PDF
Price: $25.00
Viscosity of Mineral Oil Diluted by Biodiesel Methyl Esters: Methods for Mixture Predictions and Small Samples after Tribometer Testing
Gustavo J. Molina, Sultana M. Shanta, Emeka F. Onyejizu, Valentin Soloiu
Page Count: 15
Published Online: 05 August 2020
DOI: 10.1520/MPC20200013
Format: PDF
Price: $25.00
Thermochemical Characterization of Horns and Hooves for Carbonitriding Treatment
Ismaila Idowu Ahmed, Ajadi Abdulafeez Buhari, Sulaiman Abdulkareem, Taiwo Yahaya, Jeleel Adekunle Adebisi
Page Count: 9
Published Online: 04 November 2020
DOI: 10.1520/MPC20200029
Format: PDF
Price: $25.00
Metallography and Computed Tomography Analysis of the Shrinkage Cavity Formed in Advanced High-Strength Steel Resistance Spot Welds
Vijeesh Vijayan, Siva Prasad Murugan, Seong-Guk Son, Yeong-Do Park
Page Count: 11
Published Online: 10 June 2020
DOI: 10.1520/MPC20190257
Format: PDF
Price: $25.00
Wettability Studies of Titanium and Its Oxide-Based Coatings
Vandan V. Vyas, Kamlesh V. Chauhan
Page Count: 8
Published Online: 10 November 2020
DOI: 10.1520/MPC20190258
Format: PDF
Price: $25.00
Deep Cryogenic Treatment of Plain-Carbon and Low-Alloy Steels
Pavankumar R. Sondar, Subray R. Hegde
Page Count: 11
Published Online: 31 July 2020
DOI: 10.1520/MPC20200026
Format: PDF
Price: $25.00
A Review of Polymer Electrets and Their Applications
Pooja Saxena, Prashant Shukla
Page Count: 10
Published Online: 17 December 2020
DOI: 10.1520/MPC20200126
Format: PDF
Price: $25.00
Effect of Rolling after Heat Treatment on Hydrogen Embrittlement Susceptibility for High Strength Steel Fasteners
F. Saliby, S. Brahimi, S. Rajagopalan, S. Yue
Page Count: 12
Published Online: 22 September 2020
DOI: 10.1520/MPC20190219
Format: PDF
Price: $25.00
Linear In-Plane Elasticity of a Polygon Honeycomb Core with Zero Poisson’s Ratio
Ning Feng, Jie Yan, Zhiyong Feng, Xinjian Lin, Tong Zhang, Jian Li
Page Count: 15
Published Online: 21 December 2020
DOI: 10.1520/MPC20200043
Format: PDF
Price: $25.00
Testing of Nanofluids and Their Machining Performance Evaluation
Vamsi Krishna Pasam, Rukmini Srikant Revuru, Parimala Neelam
Page Count: 17
Published Online: 23 April 2020
DOI: 10.1520/MPC20190245
Format: PDF
Price: $25.00
Determination of Constitutive Material Model Constants for Ti6Al4V Alloy at Near Orthogonal Machining Conditions
D. Venkata Sivareddy, P. Vamsi Krishna, A. Venu Gopal
Page Count: 18
Published Online: 03 September 2020
DOI: 10.1520/MPC20200041
Format: PDF
Price: $25.00
Characterization of Alkali-Activated Palm Oil Fuel Ash Pastes as a Function of Calcination Temperatures of Raw Precursor
Flora Anak Albert Daud, Idawati Ismail, Raudhah Ahmadi, Nur Amalina Shairah Binti Abdul Samat
Page Count: 14
Published Online: 13 January 2020
DOI: 10.1520/MPC20190212
Format: PDF
Price: $25.00
Mechanical Performance Studies on Composites Using Polyethylene Terephthalate Char Derived from Polyethylene Terephthalate Waste Bottle–Reinforced Polyester Composites
Sundarakannan Rajendran, Arumugaprabu Veerasimman, Manikandan Vairavan, Vigneshwaran Shanmugam, Deepak Joel Johnson Rajendran
Page Count: 13
Published Online: 22 December 2020
DOI: 10.1520/MPC20190066
Format: PDF
Price: $25.00
Evaluation of Heat Treatment Effect on Impact Strength of Glass Fiber–Reinforced Composite Material Using NDT Technique
Ali Zia Naqvi, Tariq Mairaj Rasool Khan, M. Ghazanfar Ali, Muhammad Imran, Aqueel Shah
Page Count: 10
Published Online: 13 February 2020
DOI: 10.1520/MPC20190141
Format: PDF
Price: $25.00
Studies on Pectin-Polyvinyl Alcohol–Based Biodegradable Polymer Blend Electrolytes
C. Nithya Priya, R. Muruganandham, M. Muthuvinayagam, M. Vahini
Page Count: 9
Published Online: 14 December 2020
DOI: 10.1520/MPC20200095
Format: PDF
Price: $25.00
Modeling the Yield Strength of an A356 Aluminum Alloy during the Aging Process
Guannan Guo, Qigui Wang, Yiming Rong, Richard D. Sisson
Page Count: 12
Published Online: 04 November 2020
DOI: 10.1520/MPC20200081
Format: PDF
Price: $25.00
Direct Ink Writing Method for Manufacturing Electronic Circuits Using Multiwalled Carbon Nanotubes and Polyvinyl Alcohol Composites
Syed Riyaz Ahammed, Ayyappan Susila Praveen
Page Count: 10
Published Online: 07 December 2020
DOI: 10.1520/MPC20200074
Format: PDF
Price: $25.00
Effect of Temperature on Friction and Wear Behavior under Reciprocating Dry Sliding of AISI 52100 Steel against AISI H13 Steel
Alexander Zuleta Durango, Michell Felipe Cano, Roberto Martins Souza, Amilton Sinatora
Page Count: 14
Published Online: 05 August 2020
DOI: 10.1520/MPC20200017
Format: PDF
Price: $25.00
Approach to the Design and Manufacturing of Prosthetic Dental Restorations According to the Rules of Industry 4.0
Leszek A. Dobrzański, Lech B. Dobrzański
Page Count: 83
Published Online: 07 August 2020
DOI: 10.1520/MPC20200020
Format: PDF
Price: $25.00
Temperature Dependence of Photoluminescence Spectra in Polystyrene
K. Tsagli, S. V. Dordevic
Page Count: 7
Published Online: 11 December 2020
DOI: 10.1520/MPC20200093
Format: PDF
Price: $25.00
Investigations on the Machining Characteristics of Silica-Phenolic Ablative Tiles Bonded to a Metal Substrate
V. S. Sooraj, P. Chakravarthy, H. Danish, L. Mohan Kumar
Page Count: 13
Published Online: 21 January 2020
DOI: 10.1520/MPC20190139
Format: PDF
Price: $25.00
Dynamic Mechanical and Dielectric Properties of Fly Ash/(Polystyrene/Low-Density Polyethylene) Composites
Gamal Nasr, Taqwa Mohamed, Rania Khalil
Page Count: 11
Published Online: 07 December 2020
DOI: 10.1520/MPC20200055
Format: PDF
Price: $25.00
Friction Stir Processing of AA6063-T6 Tubes and End Forming Characterization at Varying Tool Pin Profiles
Arvind K. Agrawal, R. Ganesh Narayanan
Page Count: 21
Published Online: 21 August 2020
DOI: 10.1520/MPC20190248
Format: PDF
Price: $25.00
Hydrodynamic Fluid Film and Tribofilm Formation—Combining the Friction Signals with Contact Resistance
Mathias Woydt, Raj Shah
Page Count: 8
Published Online: 10 November 2020
DOI: 10.1520/MPC20190261
Format: PDF
Price: $25.00
Effect of Warm Forging on the Microstructure and Corrosion Behavior of Austenitic Stainless Steel 316LN
Viranshu Kumar, Ratnesh Kumar Gupta, Ghanshyam Das
Page Count: 13
Published Online: 03 March 2020
DOI: 10.1520/MPC20190228
Format: PDF
Price: $25.00
The Effect of Graphene Oxide on Flame Retardancy of Polypropylene and Polystyrene
Maziyar Sabet, Hassan Soleimani, Erfan Mohammadian, Seyednooroldin Hosseini
Page Count: 9
Published Online: 10 July 2020
DOI: 10.1520/MPC20190256
Format: PDF
Price: $25.00
Experimental Response of Nonwoven Waste Cellulose Fabric–Reinforced Epoxy Composites for High Toughness and Coating Applications
Shweta Rastogi, Akarsh Verma, V. K. Singh
Page Count: 22
Published Online: 22 April 2020
DOI: 10.1520/MPC20190251
Format: PDF
Price: $25.00
Oxidation Behavior of Microstructurally Different Regions of TIG Weldment in ASTM SA 210 GrA1 Boiler Steel
Ravindra Kumar
Page Count: 7
Published Online: 01 July 2020
DOI: 10.1520/MPC20200010
Format: PDF
Price: $25.00
Reduction in Residual Stress during Plastic Deformation of the Aluminum Alloy 7449
J. S. Robinson, T. Pirling, C. E. Truman
Page Count: 10
Published Online: 11 December 2020
DOI: 10.1520/MPC20200094
Format: PDF
Price: $25.00
Cavitation Erosion Characteristics of High Bulk Modulus Oils: Preliminary Evaluation Experiment for Hydraulic Equipment
Toshiharu Kazama, Shinji Aoki, Masahiro Kobessho
Page Count: 8
Published Online: 05 August 2020
DOI: 10.1520/MPC20200003
Format: PDF
Price: $25.00
Heat Treatment and Impact Toughness of the F55-Grade Steel
Barbara Rivolta, Riccardo Gerosa, Francesca Tavasci
Page Count: 13
Published Online: 19 March 2020
DOI: 10.1520/MPC20190233
Format: PDF
Price: $25.00
Investigation of Mechanical and Tribological Properties of Al6061–TiB Metal Matrix Composites
G. B. Veeresh Kumar, D. Gopinath Reddy, C. Vineeth Reddy, Ch Sriteja, R. Pramod
Page Count: 12
Published Online: 22 April 2020
DOI: 10.1520/MPC20190173
Format: PDF
Price: $25.00
Functionalized Graphite–Reinforced Cross-Linked Poly(vinyl Alcohol) Nanocomposites for Vibration Isolator Application: Morphology, Mechanical, and Thermal Assessment
Komal Singh, Naman Jain, Akarsh Verma, V. K. Singh, Sakshi Chauhan
Page Count: 16
Published Online: 29 May 2020
DOI: 10.1520/MPC20190254
Format: PDF
Price: $25.00
High Temperature Tribology of A413/B C Nanocomposites under Dry Sliding Contact
Deepak M. Shinde, Suswagata Poria, Prasanta Sahoo
Page Count: 20
Published Online: 18 August 2020
DOI: 10.1520/MPC20200008
Format: PDF
Price: $25.00
The Effect of Reflow Temperature on Time at the End of Gravity Zone ( ) of Sn-3.8Ag-0.7Cu Solder Alloy
Ramanandan Santhanu Panikar, V. Amogha Skanda, Sanjay Tikale, K. Narayan Prabhu
Page Count: 14
Published Online: 20 May 2020
DOI: 10.1520/MPC20190230
Format: PDF
Price: $25.00
Fabrication and Investigation of Mechanical and Dry Sliding Wear Characteristics of Al6061-Si N Composites
G. B. Veeresh Kumar, A. Ulhas Krishna Rao, T. Srinivas Rao
Page Count: 14
Published Online: 02 October 2020
DOI: 10.1520/MPC20200037
Format: PDF
Price: $25.00