< Back to Issues
2018 Volume 7, Issue 1
THIS ISSUE IS COMPLETE. For citation purposes, the official publication of this journal is the online version.
Influence of Tool Rotational Speed on the Formation of Friction Stir Processing Zone in Cast Zk60/SiCp Magnesium Alloy Surface Composites
M. Vigneshkumar, G. Padmanaban, V. Balasubramanian
Page Count: 12
Published Online: 04 September 2018
DOI: 10.1520/MPC20180056
Format: PDF
Price: $25.00
Grain Refinement of P91 Steel Using Double Austenitization Treatment
Chandan Pandey, M. M. Mahapatra, Pradeep Kumar, N. Saini, J. G. Thakre, Prakash Kumar
Page Count: 11
Published Online: 24 September 2018
DOI: 10.1520/MPC20180094
Format: PDF
Price: $25.00
An Experimental Study and Parameters Optimization on Duplex Turning of Titanium Alloy
Ravindra Nath Yadav
Page Count: 22
Published Online: 24 September 2018
DOI: 10.1520/MPC20180053
Format: PDF
Price: $25.00
Corrosion Characteristics of ASTM A106 Grade B Carbon Steel Pipelines Exposed to Sodium Sulfate Solutions
R. Abdel-Karim, M. Nabil, Y. Reda, S. El-Raghy
Page Count: 15
Published Online: 02 November 2018
DOI: 10.1520/MPC20180026
Format: PDF
Price: $25.00
Analysis of Seeded Defects in Laser Additive Manufactured 300M Steel
Shannon P. Farrell, Joseph Deering
Page Count: 16
Published Online: 17 July 2018
DOI: 10.1520/MPC20170162
Format: PDF
Price: $25.00
The Development of Retrogression and Re-aging to Manage Environmental Degradation in Australian Defence Force Aircraft
Bruce R. Crawford, Alexandra Shekhter, Chris Loader
Page Count: 21
Published Online: 02 April 2018
DOI: 10.1520/MPC20170100
Format: PDF
Price: $25.00
Effect of Section Thickness on Heat Transfer during Quenching in Vegetable Oils
U. V. Nayak, K. N. Prabhu
Page Count: 13
Published Online: 12 September 2018
DOI: 10.1520/MPC20180084
Format: PDF
Price: $25.00
Buckling and Free Vibration Behavior of Cenosphere/Epoxy Syntactic Foams under Axial Compressive Loading
Sunil Waddar, Jeyaraj Pitchaimani, Mrityunjay Doddamani, Nikhil Gupta
Page Count: 15
Published Online: 27 November 2018
DOI: 10.1520/MPC20180079
Format: PDF
Price: $25.00
Influence of Materials and Machining Parameters on Drilling Performance of Syntactic Foams
Hiriyalu Shivegowda Ashrith, Mrityunjay Doddamani, Vinayak Neelakanth Gaitonde, Nikhil Gupta
Page Count: 20
Published Online: 15 November 2018
DOI: 10.1520/MPC20170166
Format: PDF
Price: $25.00
Determining the Water Holding Capacity of Synthetic Track Materials for Thoroughbred Horse Racing
J. W. Bridge, H. Rubin, K. M. Dempsey, M. L. Peterson
Page Count: 15
Published Online: 04 June 2018
DOI: 10.1520/MPC20170157
Format: PDF
Price: $25.00
Fatigue and Corrosion Fatigue Properties of Additive-Manufactured Nickel Alloy 625 and Ti-6Al-4V
Harvey Hack, Scott Olig, Erik Knudsen, Richard Link, Adelina Beckwith, Attilio Arcari
Page Count: 12
Published Online: 26 October 2018
DOI: 10.1520/MPC20170150
Format: PDF
Price: $25.00
Transitions from Pits to Cracks during Stress Corrosion Cracking in a Low-Carbon Steel
S. K. Kolawole, J. D. Obayemi, F. O. Kolawole, A. B. O. Soboyejo, W. O. Soboyejo
Page Count: 14
Published Online: 09 March 2018
DOI: 10.1520/MPC20170129
Format: PDF
Price: $25.00
Evaluation of Thermal, Fracture, and High Temperature Behavior of Mechanically Alloyed and Spark Plasma Sintered Nano-Y O Dispersed W-Ni-Mo and W-Ni-Ti-Nb Alloys
A. Patra, R. Saxena, R. R. Sahoo, S. K. Karak, T. Laha
Page Count: 17
Published Online: 27 November 2018
DOI: 10.1520/MPC20170077
Format: PDF
Price: $25.00
Energy-Based Water Droplet Impact Erosion Studies of Laser-Treated Austenitic and Martensitic Steels and their Applications
B. S. Mann
Page Count: 17
Published Online: 13 December 2018
DOI: 10.1520/MPC20180119
Format: PDF
Price: $25.00
Residual Strength and Fracture Toughness of 0.3C-CrMoV(ESR) Ultrahigh-Strength Steel Used for Solid Booster Motor Cases
P. Manikandan, G. Sudarsana Rao, S. V. S. Narayana Murty, Goutam Nayak, A. K. Mishra, P. Ramesh Narayanan, P. Ramkumar, P. V. Venkitakrishnan
Page Count: 11
Published Online: 25 June 2018
DOI: 10.1520/MPC20170171
Format: PDF
Price: $25.00
Crack-Size Measurement of Additive Manufactured Plastics Based on the DCPD Method
Benjamin Bauer, Wadim Reschetnik, Gunter Kullmer, Hans Albert Richard
Page Count: 7
Published Online: 07 June 2018
DOI: 10.1520/MPC20170148
Format: PDF
Price: $25.00
Experimental Investigations on Welding and Mechanical Characteristics of Sintered-Forged Plain Carbon Steel under Autogenous TIG Welding
T. K. Kandavel, D. Vijay
Page Count: 16
Published Online: 06 February 2018
DOI: 10.1520/MPC20170022
Format: PDF
Price: $25.00
Optimization of Hot Workability and Control of Microstructure in 18Ni (M250 Grade) Maraging Steel Using Processing Maps
K. V. A. Chakravarthi, N. T. B. N. Koundinya, Aditya Sarkar, S. V. S. Narayana Murty, B. Nageswara Rao
Page Count: 15
Published Online: 27 November 2018
DOI: 10.1520/MPC20180082
Format: PDF
Price: $25.00
The Magnetorheological Performance of MRFs Based on Different Types of Carbonyl Irons
Hansong Zhang, Zhide Hu, Hua Yan, Jianjian Yang, Fanghao Niu
Page Count: 17
Published Online: 14 September 2018
DOI: 10.1520/MPC20180014
Format: PDF
Price: $25.00
Optimization of Heating Cycles Prior Forging for Large Steel Ingots Based on a Simulation Model
L. F. Romano-Acosta, I. Álvarez-Elcoro, O. Zapata-Hernandez, L. Leduc-Lezama
Page Count: 16
Published Online: 14 February 2018
DOI: 10.1520/MPC20170139
Format: PDF
Price: $25.00
On the Oxidative Ablation and Mechanical Properties of T300 Carbon Fibers at Elevated Temperatures
Leibo Liu, Pengfei Huang, Min Miao, Qiqige Wuyun, Tenghui Li, Fei Su
Page Count: 13
Published Online: 22 March 2018
DOI: 10.1520/MPC20170117
Format: PDF
Price: $25.00
Effect of Nitriding on Antibacterial Performance of 8Cr17 and 4Cr13 Martensitic Stainless Steel
Jianfang Li, Xiaojing He, Guannan Zhang, Xiangyu Zhang, Bin Tang
Page Count: 8
Published Online: 09 March 2018
DOI: 10.1520/MPC20170058
Format: PDF
Price: $25.00
Wear Behavior of Al-Based Nanocomposites Reinforced with Bimodal Micro- and Nano-Sized Al O Particles Produced by Spark Plasma Sintering
B. Sadeghi, M. Shamanian, F. Ashrafizadeh, P. Cavaliere, A. Rizzo
Page Count: 24
Published Online: 09 August 2018
DOI: 10.1520/MPC20180039
Format: PDF
Price: $25.00
Characterization of Hot Corrosion Behavior of Different Regions of Tungsten Inert Gas Weldment in ASTM SA 210 GrA1 Boiler Tube Steel
Ravindra Kumar, V. K. Tewari, Satya Prakash
Page Count: 9
Published Online: 18 September 2018
DOI: 10.1520/MPC20180099
Format: PDF
Price: $25.00
Processing and Characterization of Zirconium Dioxide Dispersion–Strengthened Al7068 Composites
Madhusudhan Mariswamy, Mahesha Kumbeshwar
Page Count: 12
Published Online: 31 October 2018
DOI: 10.1520/MPC20180073
Format: PDF
Price: $25.00
Retraction
ASTM International
Page Count: 1
Published Online: 07 May 2018
DOI: 10.1520/MPC20180006
Format: PDF
Price: Free
Instrumented Impact Testing of Miniaturized Charpy Specimens of AM Ti-6Al-4V
Enrico Lucon, Nikolas Hrabe
Page Count: 13
Published Online: 02 April 2018
DOI: 10.1520/MPC20170160
Format: PDF
Price: $25.00
High Temperature Characteristics of a Carbon Strip Sliding against Copper with Electrical Current
T. Ding, Q. D. He, Yi Yang, Y. J. Fan, J. Yuan, S. Q. Wang
Page Count: 12
Published Online: 15 March 2018
DOI: 10.1520/MPC20170087
Format: PDF
Price: $25.00
Development of Processing Map and Constitutive Relationship for Thermomechanical Processing of Aluminum Alloy AA2014
S. V. S. Narayana Murty, Aditya Sarkar, P. Ramesh Narayanan
Page Count: 16
Published Online: 06 February 2018
DOI: 10.1520/MPC20170056
Format: PDF
Price: $25.00
Assessment of Sputtered Chromium Oxide-Nitride Coatings
Divyeshkumar P. Dave, Nicky P. Patel, Kamlesh V. Chauhan, Sushant K. Rawal
Page Count: 10
Published Online: 20 February 2018
DOI: 10.1520/MPC20170053
Format: PDF
Price: $25.00
Effects of Arcor Nitrocarburizing Process on the Case Chemistry and Morphology of AISI 1018 Low-Carbon Steel
Jagdeep Sharma, Balwinder Singh Sidhu, Rajesh Gupta
Page Count: 14
Published Online: 05 September 2018
DOI: 10.1520/MPC20180078
Format: PDF
Price: $25.00
Structural Engineering Test for Determining the Circumferential Modulus of Circular Pipes and Tubes
Abdul-Hamid Zureick, Andrew J. Bechtel
Page Count: 16
Published Online: 28 June 2018
DOI: 10.1520/MPC20170158
Format: PDF
Price: $25.00
Low Temperature Photoluminescence in Some Common Polymers
T. Posavec, S. Nepal, S. V. Dordevic
Page Count: 8
Published Online: 02 May 2018
DOI: 10.1520/MPC20170138
Format: PDF
Price: $25.00
Effects of Austenitizing and Quenching Parameters on Microstructures and Mechanical Properties of Press Hardened WHT1500HF Steel
Kuanhui Hu, Guifeng Zhou, Jing Liu
Page Count: 11
Published Online: 03 August 2018
DOI: 10.1520/MPC20170126
Format: PDF
Price: $25.00
Modeling of Heat Transfer in Rotary Furnaces Using Finite Element Approach
K. J. Akinluwade, F. P. Ibitoye, D. A. Isadare, M. O. Adeoye, A. R. Adetunji
Page Count: 11
Published Online: 26 February 2018
DOI: 10.1520/MPC20160100
Format: PDF
Price: $25.00
A Review on SHM Techniques and Current Challenges for Characteristic Investigation of Damage in Composite Material Components of Aviation Industry
Saqlain Abbas, Fucai Li, Jianxi Qiu
Page Count: 35
Published Online: 19 June 2018
DOI: 10.1520/MPC20170167
Format: PDF
Price: $25.00
The Investigation of Tribological Properties of Epoxy-Polyether Composite Materials for Using in the Friction Units of Means of Sea Transport
M. Brailo, A. Buketov, S. Yakushchenko, O. Sapronov, V. Vynar, O. Kobelnik
Page Count: 25
Published Online: 12 July 2018
DOI: 10.1520/MPC20170161
Format: PDF
Price: $25.00
Thermo-Mechanical Analysis of Activated Tungsten Inert Gas Welding (A-TIG) of Type 316LN Stainless Steel Thin Plates
K. C. Ganesh, M. Vasudevan, K. R. Balasubramanian, P. Vasantharaja, N. Chandrasekhar
Page Count: 18
Published Online: 16 April 2018
DOI: 10.1520/MPC20170143
Format: PDF
Price: $25.00
Failure Analysis of Superheater Tubes Cracking of a Boiler in a Power Plant
Zhiwei Sun, Yuling Fan, Shugen Xu, Mingda Song, Yuan Zhang
Page Count: 9
Published Online: 13 March 2018
DOI: 10.1520/MPC20170141
Format: PDF
Price: $25.00
Strain Rate Sensitivity Effect Measured in 316 Steel by the Small Punch Testing Method
F. Lowrie, M. Gorley, E. Surrey, B. Wynne, D. Wilkes
Page Count: 8
Published Online: 12 September 2018
DOI: 10.1520/MPC20180068
Format: PDF
Price: $25.00